slitaz-forge rev 594
Update mirror/floppies
line diff
1.1 --- a/mirror/floppies/1.0/description.html Wed Jun 03 10:26:51 2015 +0300 1.2 +++ b/mirror/floppies/1.0/description.html Fri Jul 31 18:40:18 2015 +0200 1.3 @@ -23,3 +23,8 @@ 1.4 The base flavor will then start and you will be prompted to insert extra floppies 1.5 for the core flavor. You can bypass this by using Q and Enter. 1.6 </p> 1.7 +<p> 1.8 +If you have an ext3 partition on your hard disk, the bootstrap can create the 1.9 +installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 1.10 +on your hard disk without extra media. 1.11 +</p>
2.1 --- a/mirror/floppies/2.0/description.html Wed Jun 03 10:26:51 2015 +0300 2.2 +++ b/mirror/floppies/2.0/description.html Fri Jul 31 18:40:18 2015 +0200 2.3 @@ -27,3 +27,8 @@ 2.4 The base flavor will then start and you will be prompted to insert extra floppies 2.5 for justx and core flavors. You can bypass this by using Q and Enter. 2.6 </p> 2.7 +<p> 2.8 +If you have an ext3 partition on your hard disk, the bootstrap can create the 2.9 +installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 2.10 +on your hard disk without extra media. 2.11 +</p>
3.1 --- a/mirror/floppies/3.0/description.html Wed Jun 03 10:26:51 2015 +0300 3.2 +++ b/mirror/floppies/3.0/description.html Fri Jul 31 18:40:18 2015 +0200 3.3 @@ -21,9 +21,9 @@ 3.4 </p> 3.5 <p> 3.6 The floppy is then loaded into memory (one dot each 64k) and you will be prompted to 3.7 -insert the next floppy, <i>fd002.img</i>. And so on up to <i>fd005.img</i>. 3.8 +insert the next floppy, <i>fd002.img</i>. And so on up to last floppy. 3.9 </p> 3.10 <p> 3.11 -The base flavor will then start and you will be prompted to insert extra floppies 3.12 -for justx and core flavors. You can bypass this by using Q and Enter. 3.13 +You will be prompted to insert extra floppies for justx and core flavors. 3.14 +You can bypass this by using B to boot without loading extra floppies. 3.15 </p>
4.1 --- a/mirror/floppies/4.0/description.html Wed Jun 03 10:26:51 2015 +0300 4.2 +++ b/mirror/floppies/4.0/description.html Fri Jul 31 18:40:18 2015 +0200 4.3 @@ -7,15 +7,15 @@ 4.4 base provides the minimum slitaz distribution subset in text mode. 4.5 </li> 4.6 <li> 4.7 - <b>justx</b> needs 96M of RAM and 11 floppies: <i>fd001.img</i> to <i>fd104.img</i>.<br /> 4.8 + <b>justx</b> needs 96M of RAM and 12 floppies: <i>fd001.img</i> to <i>fd105.img</i>.<br /> 4.9 justx provides the minimum slitaz distribution subset with X11 support. 4.10 </li> 4.11 <li> 4.12 - <b>gtkonly</b> needs 128M of RAM and 16 floppies: <i>fd001.img</i> to <i>fd204.img</i>.<br /> 4.13 + <b>gtkonly</b> needs 128M of RAM and 17 floppies: <i>fd001.img</i> to <i>fd204.img</i>.<br /> 4.14 gtkonly provides the minimum slitaz distribution subset with Gtk+ support. 4.15 </li> 4.16 <li> 4.17 - <b>core</b> needs 192M of RAM and 25 floppies: <i>fd001.img</i> to <i>fd308.img</i>.<br /> 4.18 + <b>core</b> needs 192M of RAM and 25 floppies: <i>fd001.img</i> to <i>fd307.img</i>.<br /> 4.19 core provides the default slitaz distribution. 4.20 </li> 4.21 </ul> 4.22 @@ -25,9 +25,9 @@ 4.23 </p> 4.24 <p> 4.25 The floppy is then loaded into memory (one dot each 64k) and you will be prompted to 4.26 -insert the next floppy, <i>fd002.img</i>. And so on up to <i>fd006.img</i>. 4.27 +insert the next floppy, <i>fd002.img</i>. And so on up to last floppy. 4.28 </p> 4.29 <p> 4.30 -The base flavor will then start and you will be prompted to insert extra floppies 4.31 -for justx and core flavors. You can bypass this by using Q and Enter. 4.32 +You will be prompted to insert extra floppies for justx, gtkonly and core flavors. 4.33 +You can bypass this by using B to boot without loading extra floppies. 4.34 </p>
5.1 --- a/mirror/floppies/builder/bootloader Wed Jun 03 10:26:51 2015 +0300 5.2 +++ b/mirror/floppies/builder/bootloader Fri Jul 31 18:40:18 2015 +0200 5.3 @@ -2,27 +2,144 @@ 5.4 # 5.5 # This script creates a floppy image set from a linux bzImage and can merge 5.6 # a cmdline and/or one or more initramfs. 5.7 -# The total size can not exceed 15M because INT 15H function 87H limitations. 5.8 # 5.9 -# (C) 2009 Pascal Bellard - GNU General Public License v3. 5.10 +# (C) 2009-2015 Pascal Bellard - GNU General Public License v3. 5.11 5.12 usage() 5.13 { 5.14 cat <<EOT 5.15 -Usage: $0 bzImage [--prefix image_prefix] [--info file ] 5.16 - [--format 1200|1440|1680|1920|2880|... ] [--mem mb] 5.17 - [--rdev device] [--video mode] [--flags rootflags] [--tracks cnt] 5.18 - [--cmdline 'args'] [--dont-edit-cmdline] [--no-syssize-fix] 5.19 +Usage: $0 bzImage [--prefix image_prefix] [--info file] [--quiet] 5.20 + [--format 1200|1440|1680|1920|2880|...] [--mem mb] [--tracks cnt] 5.21 + [--rdev device] [--video mode] [--flags rootflags] [--no-syssize-fix] 5.22 + [--dont-edit-cmdline] [--cmdline 'args'] [--hide-version-string] 5.23 [--address-initrd address] [--initrd initrdfile]... 5.24 5.25 Default values: --format 1440 --tracks 80 --rdev /dev/fd0 --prefix floppy. --mem 16 5.26 5.27 Example: 5.28 $0 /boot/bzImage --rdev /dev/ram0 --video -3 --cmdline 'rw lang=fr_FR kmap=fr-latin1 laptop autologin' --initrd /boot/rootfs.gz --initrd ./myconfig.gz 5.29 + 5.30 +or: $0 --extract floppy* 5.31 + 5.32 +Create kernel and maybe cmdline, initrd and info files from a floppy images set 5.33 EOT 5.34 exit 1 5.35 } 5.36 5.37 +# bzImage offsets 5.38 +SetupSzOfs=497 5.39 +FlagsOfs=498 5.40 +OldRamfsLenOfs=504 5.41 +VideoModeOfs=506 5.42 +RootDevOfs=508 5.43 +Magic=0x202 5.44 +RamfsAdrOfs=0x218 5.45 +RamfsLenOfs=0x21C 5.46 + 5.47 +ddq() { dd $@ 2> /dev/null; } 5.48 + 5.49 +get() 5.50 +{ 5.51 +echo $( od -v -j $(($1)) -N ${4:-${3:-2}} -t u${3:-2} -w${3:-2} -An $2 2>/dev/null || 5.52 + hexdump -v -s $(($1)) -n ${4:-${3:-2}} -e "\"\" 1/${3:-2} \" %d\n\"" $2 ) 5.53 +} 5.54 + 5.55 +trace() 5.56 +{ 5.57 + [ -n "$DEBUG" ] && printf "$@" 1>&2 && echo 1>&2 5.58 +} 5.59 + 5.60 +# usage: store bits offset data file 5.61 +store() 5.62 +{ 5.63 + n=$3; for i in $(seq 8 8 $1); do 5.64 + printf '\\\\x%02X' $(($n & 255)) 5.65 + n=$(($n >> 8)) 5.66 + done | xargs echo -en | ddq bs=1 conv=notrunc of=$4 seek=$(($2)) 5.67 + s=$1; a=$2; d=$3; shift 4; c="$@" 5.68 + trace "store$s(%03X) = %0$(($s/4))X $c" $a $d 5.69 +} 5.70 + 5.71 +die() 5.72 +{ 5.73 + echo $@ 1>&2 5.74 + exit 1 5.75 +} 5.76 +extract() 5.77 +{ 5.78 + shift 5.79 + [ ! -s "$1" ] && die "No floppy ?" 5.80 + [ $(get 0x1FE "$1") -ne 43605 ] && die "Not bootable" 5.81 + [ $(get $Magic "$1" 4) != 1400005704 ] && 5.82 + [ $(get 0x1F4 "$1") -gt 32768 -o $(get 0x1F6 "$1") -ne 0 ] && 5.83 + die "Not linux." 5.84 + FORMAT="$(($(stat -c "%s" $1)/1024))" 5.85 + cat <<EOT 5.86 +--format $FORMAT 5.87 +--rdev $(printf "0x%04X" $(get $RootDevOfs $1)) 5.88 +--video $(get $VideoModeOfs $1) 5.89 +--flags $(get $FlagsOfs $1) 5.90 +EOT 5.91 + MYBB="$(ddq if=$1 bs=512 count=1 | strings | grep "Insert disk 00")" 5.92 + cmdline=0 5.93 + info=0 5.94 + if [ "$MYBB" ]; then 5.95 + cmdline=$(get 0x22 $1) 5.96 + info=$(get 0x1EF $1) 5.97 + [ $(get 0x75 $1) -eq $((0xDB0)) ] && echo "--dont-edit-cmdline" 5.98 + [ $(get 0x58 $1) -eq $((0x9090)) ] && echo "--hide-version-string" 5.99 + fi 5.100 + n=$(($(get $SetupSzOfs $1 1)+1)) 5.101 + [ $n -eq 1 ] && n=5 5.102 + [ $info -ne 0 ] && infolen=$(($n-$info/512)) && n=$(($info/512)) 5.103 + [ $cmdline -ne 0 ] && n=$(($cmdline/512)) 5.104 + cat "$@" | { 5.105 + ddq bs=512 count=$n >kernel 5.106 + files="kernel" 5.107 + if [ "$MYBB" ]; then 5.108 + store 8 $SetupSzOfs $(($n-1)) kernel "setup size $n" 5.109 + store 16 0x22 0 kernel "clear cmdline" 5.110 + store 16 0x1EF 0 kernel "clear info" 5.111 + fi 5.112 + [ $cmdline -ne 0 ] && files="$files cmdline" && 5.113 + ddq bs=512 count=1 | strings | sed q > cmdline 5.114 + [ $info -ne 0 ] && files="$files info" && 5.115 + ddq bs=512 count=$infolen | sed \ 5.116 + 's/'$(echo -en "\xff\xff$//;s/\xff/\f")'/g;s/\r/\n/g;q' > info 5.117 + syssz=$(get 0x1F4 kernel 4) 5.118 + ddq bs=16 count=$syssz >>kernel 5.119 + [ $(($syssz % 32)) -ne 0 ] && 5.120 + ddq bs=16 of=/dev/null count=$((32 - ($syssz % 32))) 5.121 + if [ $(get $Magic kernel 4) == 1400005704 ]; then 5.122 + ddq bs=1 count=200 skip=$((512+$(get 0x20E kernel 2))) \ 5.123 + if=kernel | strings | sed q 5.124 + len=$(get $RamfsLenOfs kernel 4) 5.125 + if [ $len -ne 0 ]; then 5.126 + adrs=$(get $RamfsAdrOfs kernel 4) 5.127 + printf "--address-initrd 0x%X \n" $adrs 5.128 + echo "--mem $(((($adrs+$len)/1024+512)/1024))" 5.129 + ddq bs=512 count=$((($len+511)/512)) > initrd 5.130 + ddq count=0 bs=1 seek=$len of=initrd 5.131 + files="$files initrd" 5.132 + store 64 $RamfsAdrOfs 0 kernel "reset initrd" 5.133 + fi 5.134 + if [ $(get 0x206 kernel) -ge 514 ]; then 5.135 + store 32 0x228 0 kernel "clean cmdline32" 5.136 + fi 5.137 + else 5.138 + len=$(get $OldRamfsLenOfs kernel) 5.139 + [ $len -ne 0 ] && files="$files initrd" && 5.140 + if [ -s "$2" ]; then 5.141 + ddq if=$2 bs=1024 count=$len of=initrd 5.142 + else 5.143 + ddq if=$1 bs=1024 skip=256 count=$len of=initrd 5.144 + fi 5.145 + fi 5.146 + ls -l $files 5.147 + } 5.148 + exit 5.149 +} 5.150 + 5.151 KERNEL="" 5.152 INITRD="" 5.153 ADRSRD="" 5.154 @@ -34,7 +151,9 @@ 5.155 FLAGS="" 5.156 TRACKS="80" 5.157 MEM="16" 5.158 +HIDE="" 5.159 NOEDIT="" 5.160 +QUIET="" 5.161 NOSYSSIZEFIX="" 5.162 INFOFILE="" 5.163 DEBUG="" 5.164 @@ -44,18 +163,19 @@ 5.165 -inf*) INFOFILE="$2"; shift;; 5.166 -i*) INITRD="$INITRD $2"; shift;; 5.167 -a*) ADRSRD="$2"; shift;; 5.168 - -h*) HEAP="$2"; shift;; 5.169 - -l*) LOADERTYPE="$2"; shift;; 5.170 + -h*) HIDE="1";; 5.171 -p*) PREFIX="$2"; shift;; 5.172 -fl*)FLAGS="$2"; shift;; # 1 read-only, 0 read-write 5.173 -f*) FORMAT="$2"; shift;; 5.174 -m*) MEM="$(echo $2 | sed 's/[^0-9]//g')"; shift;; 5.175 -r*) RDEV="$2"; shift;; 5.176 -v*) VIDEO="$2"; shift;; # -3 .. n 5.177 - -t*) TRACKS="$2"; shift;; # likely 81 .. 84 5.178 + -t*) TRACKS="$2"; shift;; # likely 81 .. 84 5.179 -n*) NOSYSSIZEFIX="1";; 5.180 -debug) DEBUG="1";; 5.181 -d*) NOEDIT="1";; 5.182 + -q*) QUIET="1";; 5.183 + -e*) extract "$@";; 5.184 *) KERNEL="$1";; 5.185 esac 5.186 shift 5.187 @@ -66,91 +186,62 @@ 5.188 echo "Invalid track count for format $FORMAT." 5.189 usage 5.190 fi 5.191 -[ 0$MEM -lt 4 ] && MEM=4 5.192 -[ $MEM -gt 16 ] && MEM=16 5.193 - 5.194 -ddq() { dd $@ 2> /dev/null; } 5.195 +[ 0$MEM -lt 2 ] && MEM=2 5.196 5.197 patch() 5.198 { 5.199 echo -en $(echo ":$2" | sed 's/:/\\x/g') | \ 5.200 ddq bs=1 conv=notrunc of=$3 seek=$((0x$1)) 5.201 - [ -n "$DEBUG" ] && echo "patch $1 $2 $4" 1>&2 5.202 -} 5.203 - 5.204 -# usage: store bits offset data file 5.205 -store() 5.206 -{ 5.207 - n=$3; for i in $(seq 8 8 $1); do 5.208 - printf '\\\\x%02X' $(($n & 255)) 5.209 - n=$(($n >> 8)) 5.210 - done | xargs echo -en | ddq bs=1 conv=notrunc of=$4 seek=$(($2)) 5.211 - [ -n "$DEBUG" ] && printf "store%d(%03X) = %0$(($1/4))X %s\n" $1 $2 $3 "$5" 1>&2 5.212 -} 5.213 - 5.214 -# usage: getlong offset file 5.215 -getlong() 5.216 -{ 5.217 - ddq if=$2 bs=1 skip=$(($1)) count=4 | hexdump -e '"" 1/4 "%d" "\n"' 5.218 + trace "patch $1 $2 $4" 5.219 } 5.220 5.221 error() 5.222 { 5.223 - echo $@ 1>&2 5.224 rm -f $bs 5.225 - exit 1 5.226 + die $@ 5.227 } 5.228 5.229 floppyset() 5.230 { 5.231 - # bzImage offsets 5.232 - SetupSzOfs=497 5.233 - FlagsOfs=498 5.234 - VideoModeOfs=506 5.235 - RootDevOfs=508 5.236 - Magic=0x202 5.237 - RamfsAdrOfs=0x218 5.238 - RamfsLenOfs=0x21C 5.239 - 5.240 # boot+setup address 5.241 SetupBase=0x90000 5.242 5.243 bs=/tmp/bs$$ 5.244 5.245 # Get and patch boot sector 5.246 - # See http://hg.slitaz.org/wok/raw-file/66e38bd6a132/linux/stuff/linux-header.u 5.247 - [ -n "$DEBUG" ] && echo "Read bootsector..." 1>&2 5.248 + # See http://hg.slitaz.org/wok/raw-file/13835bce7189/syslinux/stuff/iso2exe/bootloader.S 5.249 + trace "Read bootsector..." 5.250 ddq if=$KERNEL bs=512 count=1 of=$bs 5.251 5.252 - [ $(( $(getlong 0x1FE $bs) & 0xFFFF )) -eq 43605 ] || 5.253 - error "Not bootable" 5.254 + [ $(get 0x1FE $bs) -eq 43605 ] || error "Not bootable" 5.255 5.256 uudecode <<EOT | ddq of=$bs conv=notrunc 5.257 begin-base64 644 - 5.258 -/L+4nWgAkBeJ/BYHMcC5HgDzq1sfD6Gg8X1AxXd4BlexBvOlFh9kZo9HeMZF 5.259 -+D/6l1hB6DwBvgACgUwQIIDGRCWbA3QO6GoBWwseKAJ0LFNH6AYBXuhaAbAg 5.260 -zRCwCM0QTuhZATwIdAOIBK05NigCdPDoMgE8CnXgiHz+W4nm/0gQxkAVk4Dz 5.261 -CHX0u/QBoRUCsQVmix9mS2bT60NoAAgHv4AAiXwTiUQbAfjR7yn7nHMCAd9Q 5.262 -V1ZTMdvongBbXlmGzbSHFgfNFVidd9ChGQK7HAKxCTlEG3K6l80T6gAAIJCw 5.263 -RijIvtgB6MoAXesjgPkTcgQ4wXdrgP4CcgQ45ndsYIH9AAZ0KgZSUVOWtAJQ 5.264 -sQa1BMHFBLAPIegEkCcUQCfohAD+zXXssCDNEOK06I4AmM0TYVJQKMh3ArAB 5.265 -mDn4cgKJ+FC0As0TlV5YWnKglUGO6YDHAk90S0519IzplTjBdT+IyP7GsQE4 5.266 -5nU1iPT+xYD9ULYAdSq1AGC+2wH+RAxT6C8AW+g2AHUWUpjNE7gBAs0TWtDU 5.267 -OmT+depGCOR15WHrkbAxLAO0DrsHAM0QPA1088OwDejv/6wIwHX4w79sBLFb 5.268 -ZAINuA0BZDoNdArNFnT0mM0WjudHw1g6AEluc2VydCBkaXNrIDEHDQA= 5.269 +v8adaACQF4n8FgcxwLk7APOqWx+g8X1AD6H6xXd4XwZXvQAAsQbzpRYfZGaP 5.270 +R3jGRfg/l1hB6CQBMfYLNu8BdAzoggF0B+hgATwbdfS+AAKBTBAggMZEJZvo 5.271 +ZwEx9gt3G3Q6x0cZP6PoWwGwIOgtASwYc/lO6DEBmDwIdAOIBK05dxt08OgV 5.272 +ATwKdd+IfP4WB78AgIn+h3cbtQLzpFuJ5v9IEMdAFAiTgPMIdfO79AGxBaEV 5.273 +AmaLH2ZLZtPrZkOJRBtmv4AAAABmKfuccwIB31BTVjHbaACAB+hwAF5bjMG0 5.274 +hxYHzRVYBQABEEwfnXfPuQkCuxwCOE/+che0iM0VPQCwcgaIbB+Ib/+hGQLT 5.275 +b+J1o5fNE+oAACCQWjjBdzRgzRP56HMAYVJQKMh3ArABOfhyAon4ULQCzRNa 5.276 +WHLclQHRjukA1wDXKddadE2M6ZU4wXXUiMixATDOdcz+xYD9UHXFtQBgvtEB 5.277 +U7sPAIAg8Ev+AIA4OXf16EwAW4n16CkAdRVSmM0TuAECzRNa0NQ6Zv516kVI 5.278 +debrjbAxHAO0DrsHAM0QPA1088O/bARkxgWmuA0BZDoldArNFnT0mM0WjudH 5.279 +wwN0DrAN6NL/rDwAf/jDSW5zZXJ0IGRpc2sgMDAxIGFuZCBFbnRlci4HDQAA 5.280 +AAA= 5.281 ==== 5.282 EOT 5.283 # Get setup 5.284 - setupsz=$(( $(getlong $SetupSzOfs $bs) & 0xFF )) 5.285 + setupsz=$(get $SetupSzOfs $bs 1) 5.286 if [ $setupsz -eq 0 ]; then 5.287 setupsz=4 5.288 store 8 $SetupSzOfs $setupsz $bs "setup size $setupsz" 5.289 fi 5.290 - [ -n "$DEBUG" ] && echo "Read setup ($setupsz sectors) ..." 1>&2 5.291 + trace "Read setup ($setupsz sectors) ..." 5.292 ddq if=$KERNEL bs=512 skip=1 count=$setupsz >> $bs 5.293 5.294 - Version=$(( $(getlong 0x206 $bs) & 0xFFFF )) 5.295 - [ $(getlong $Magic $bs) -ne 1400005704 ] && Version=0 5.296 + Version=$(get 0x206 $bs) 5.297 + [ $(get $Magic $bs 4) != 1400005704 ] && Version=0 5.298 feature="" 5.299 while read prot kern info ; do 5.300 [ $Version -lt $((0x$prot)) ] && continue 5.301 @@ -158,10 +249,11 @@ 5.302 done <<EOT 5.303 200 1.3.73 kernel_version, bzImage, initrd, loadflags/type_of_loader 5.304 201 1.3.76 heap_end_ptr 5.305 -202 2.4.0 new cmdline 5.306 +202 2.4.0 new cmdline + relocatable setup 5.307 204 2.6.14 long syssize 5.308 +206 2.6.22 cmdline maxsize $(get 0x238 $bs 4) 5.309 EOT 5.310 - [ -n "$DEBUG" ] && printf "Protocol %X $feature\n" $Version 1>&2 5.311 + trace "Protocol %X $feature" $Version 5.312 5.313 # Old kernels need bootsector patches to disable rescent features 5.314 while read minversion maxversion offset bytes rem; do 5.315 @@ -169,29 +261,17 @@ 5.316 [ $Version -lt $(( 0x$minversion )) ] && continue 5.317 patch $offset $bytes $bs "$rem" 5.318 done <<EOT 5.319 -000 1FF 08D B8:00:01 force zImage (movw \$0x100, %ax) 5.320 -000 1FF 0CB EB:0B skip initrd code 5.321 -000 201 01E EB:1E:00:00:00:00 room for the cmdline magic 5.322 -000 201 036 BE:00:00:E8:76:01:EB:0A:06:57:B1:06:F3:A5:EB:DE code in cmdline magic moved 5.323 -000 1FF 039 90:90:90 no kernel version 5.324 -000 201 04B 22:00 old cmdline ptr 1 5.325 -000 201 06D 22:00 old cmdline ptr 2 5.326 +000 1FF 0B2 B8:00:01 force zImage (movw \$0x100, %ax) 5.327 +000 1FF 0F9 EB skip initrd code 5.328 +000 1FF 059 90:90:90 no kernel version 5.329 +000 1FF 050 90:90:90:90:90 type_of_loader 5.330 +000 200 055 90:90:90:90 heap_end_ptr 5.331 000 203 1F6 00:00 syssize32 5.332 -200 FFF 210 FF type_of_loader=FF 5.333 -201 FFF 224 00:9B heap_end_ptr 5.334 EOT 5.335 - if [ $Version -lt 514 ]; then 5.336 - version_string=$((0x200 + ($(getlong 0x20E $bs) & 65535) )) 5.337 - store 16 0x0037 $version_string $bs version_string 5.338 - fi 5.339 - if [ $Version -ge 512 -a $(getlong 0x214 $bs) -ge $((0x100000)) ]; then 5.340 - patch 211 81 $bs loadflags=can_use_heap+loadhigh 5.341 - patch 09D 10 $bs LOADSEG=0x1000 5.342 - patch 0A0 00:01 $bs LOADSZ=0x10000 5.343 - fi 5.344 - [ -n "$CMDLINE" ] || patch 04D EB $bs "No cmdline" 5.345 - [ -n "$NOEDIT" ] && patch 059 0D:46:EB:14 $bs 'mov CR,%al ; inc %si; jmp putal' 5.346 - [ 1$TRACKS -ne 180 ] && store 8 0x171 $TRACKS $bs TRACKS 5.347 + [ -n "$CMDLINE" ] || patch 061 EB $bs "No cmdline" 5.348 + [ -n "$HIDE" ] && patch 058 90 90 90 $bs "Hide version" 5.349 + [ -n "$NOEDIT" ] && patch 075 B0:0D:90 $bs 'mov CR,%al ; nop' 5.350 + [ 1$TRACKS -ne 180 ] && store 8 0x15F $TRACKS $bs TRACKS 5.351 5.352 [ -n "$FLAGS" ] && store 16 $FlagsOfs $FLAGS $bs FLAGS 5.353 [ -n "$VIDEO" ] && store 16 $VideoModeOfs $VIDEO $bs VIDEO 5.354 @@ -205,78 +285,93 @@ 5.355 [ -b "$RDEV" ] && RDEV=$(stat -c '0x%02t%02T' $RDEV 2> /dev/null) 5.356 store 16 $RootDevOfs $RDEV $bs RDEV 5.357 5.358 - [ $FORMAT -lt 1440 ] && store 8 0xEF 16 $bs 1.2M 5.359 - [ $FORMAT -lt 1200 ] && store 8 0xEF 10 $bs 720K 5.360 - [ $FORMAT -lt 720 ] && store 8 0x171 40 $bs 360K 5.361 - [ $FORMAT -lt 360 ] && store 8 0xEF 9 $bs 320K 5.362 - [ $FORMAT -lt 320 ] && store 8 0xF8 2 $bs 160K 5.363 + [ $FORMAT -lt 720 ] && store 8 0x15F 40 $bs 360K 5.364 + [ $FORMAT -lt 320 ] && store 8 0x158 237 $bs 160K 5.365 5.366 + extra=0 5.367 + # Store cmdline after setup for kernels >= 0.99 5.368 + if [ -n "$CMDLINE" ]; then 5.369 + CmdlineOfs=$(stat -c '%s' $bs) 5.370 + store 16 0x22 $CmdlineOfs $bs "Cmdline @$CmdlineOfs '$CMDLINE'" 5.371 + [ $Version -ge 514 ] && 5.372 + store 32 0x228 $(( $SetupBase + 0x8000 )) $bs "Cmdline32" 5.373 + echo -n "$CMDLINE" | ddq bs=512 count=1 conv=sync >> $bs 5.374 + extra=$(($extra+1)) 5.375 + store 8 0x1F1 $(($setupsz+$extra)) $bs setup size 5.376 + [ $Version -ge 512 ] && [ -n "$QUIET" ] && 5.377 + store 8 0x211 $(($(get 0x211 $bs 1) | 32)) $bs suppress early messages 5.378 + fi 5.379 + 5.380 # Info text after setup 5.381 if [ -s "$INFOFILE" ]; then 5.382 - patch 048 9a:00:00:00:90 $bs lcall displayinfo 5.383 - uudecode >$bs.infotext <<EOT 5.384 -begin-base64 644 - 5.385 -MdsGYI7D6AAAXoHGSgCJ8MHoCUii8QGwDbQOuwcAzRCsPAx1I79sBLFbJgIN 5.386 -uBsBJjoNdAnNFnT0mM0Wjsc8IHPjPBt0BuvPCMB1zWEHCx4oAss= 5.387 -==== 5.388 -EOT 5.389 - cat "$INFOFILE" >>$bs.infotext 5.390 - if [ $Version -lt 514 ]; then 5.391 - store 16 0x050 0x0022 $bs.infotext 5.392 - fi 5.393 + InfoOfs=$(stat -c '%s' $bs) 5.394 + sed -e ':a;N;$!ba;s/\r\n/\r/g;s/\n/\r/g' \ 5.395 + -e 's/'$(echo -e "\f/\xff/g;s/$/\xff\xff")'/' \ 5.396 + < "$INFOFILE" > $bs.infotext 5.397 ddq if=/dev/zero bs=512 count=1 >>$bs.infotext 5.398 - n=$(($(stat -c %s $bs.infotext)/512)) 5.399 - ddq if=$bs.infotext count=$n bs=512 >> $bs 5.400 + infolen=$(($(stat -c %s $bs.infotext)/512)) 5.401 + ddq if=$bs.infotext count=$infolen bs=512 >> $bs 5.402 + extra=$(($extra+$infolen)) 5.403 rm -f $bs.infotext 5.404 - store 8 0x1F1 $(($setupsz+$n)) $bs update setup size 5.405 - store 8 0x04A $((2+2*$setupsz)) $bs update displayinfo call 5.406 + store 8 0x1F1 $(($setupsz+$extra)) $bs setup size 5.407 + store 16 0x1EF $InfoOfs $bs update infoptr 5.408 fi 5.409 5.410 - # Store cmdline after setup for kernels >= 0.99 5.411 - if [ -n "$CMDLINE" ]; then 5.412 - echo -n "$CMDLINE" | ddq bs=512 count=1 conv=sync >> $bs 5.413 - CmdlineOfs=0x9E00 # Should be in 0x8000 .. 0xA000 5.414 - ArgPtrOfs=0x228 5.415 - ArgPtrVal=$(( $SetupBase + $CmdlineOfs )) 5.416 - if [ $Version -lt 514 ]; then 5.417 - ArgPtrOfs=0x0020 5.418 - ArgPtrVal=$(( 0xA33F + ($CmdlineOfs << 16) )) 5.419 - fi 5.420 - store 32 $ArgPtrOfs $ArgPtrVal $bs "Cmdline '$CMDLINE'" 5.421 + syssz=$((($(stat -c %s $KERNEL)+15)/16-32*(1+$setupsz))) 5.422 + #syssz=$(get 0x1F4 $bs 4) 5.423 + sysszsect=$((($syssz+31)/32)) 5.424 + store 16 $OldRamfsLenOfs 0 $bs clear oldramfs 5.425 + INITRD="${INITRD# }" 5.426 + INITRDPAD=4 5.427 + [ -n "$INITRD" ] && 5.428 + if [ $Version -lt 512 ]; then 5.429 + # Compute initramfs location (protocol < 2.00) 5.430 + [ $syssz -gt 32768 ] && syssz=$(get 0x1F4 $bs 2) 5.431 + [ $syssz -eq 0 ] && syssz=$((0x7F00)) 5.432 + sysszsect=$((($syssz+31)/32)) 5.433 + INITRD="${INITRD%%,*}" 5.434 + initrdlen=$(stat -c %s "$INITRD") 5.435 + store 16 $OldRamfsLenOfs $(($initrdlen/1024)) $bs set oldramfs 5.436 + INITRDDISKALIGN=$((0x40000)) 5.437 + [ $(($initrdlen+$INITRDDISKALIGN)) -gt $(($FORMAT*1024)) -o \ 5.438 + $(((512*$sysszsect) + $(stat -c %s $bs))) -gt $INITRDDISKALIGN -o \ 5.439 + -n "$ADRSRD" ] && INITRDDISKALIGN=$(($FORMAT*1024)) 5.440 + else 5.441 +INITRDRAMALIGN=0x1000 5.442 + # Compute initramfs size (protocol >= 2.00) 5.443 + initrdlen=0 5.444 + INITRDDISKALIGN=0 5.445 + for i in ${INITRD//,/ }; do 5.446 + [ -s "$i" ] || continue 5.447 + while [ -L "$i" ]; do i="$(readlink $i)"; done 5.448 + size=$(stat -c %s "$i") 5.449 + trace "initrd $i $size " 5.450 + initrdlen=$(((($initrdlen + $INITRDPAD - 1) & -$INITRDPAD) + $size)) 5.451 + ADRSRD2=$(( (($MEM * 0x100000) - $initrdlen) & -$INITRDRAMALIGN )) 5.452 + store 32 $RamfsAdrOfs $(( ${ADRSRD:-$ADRSRD2} )) $bs initrd adrs 5.453 + store 32 $RamfsLenOfs $initrdlen $bs initrdlen 5.454 + done 5.455 fi 5.456 5.457 - # Compute initramfs size (protocol >= 2.00) 5.458 - [ $Version -lt 512 ] && INITRD="" 5.459 - initrdlen=0 5.460 -INITRDPAD=4 5.461 -INITRDALIGN=0x1000 5.462 - for i in $( echo $INITRD | sed 's/,/ /' ); do 5.463 - [ -s "$i" ] || continue 5.464 - while [ -L "$i" ]; do i="$(readlink $i)"; done 5.465 - size=$(( ($(stat -c %s "$i") + $INITRDPAD - 1) & -$INITRDPAD )) 5.466 - [ -n "$DEBUG" ] && echo "initrd $i $size " 1>&2 5.467 - initrdlen=$(( $initrdlen + $size )) 5.468 - ADRSRD=$(( (($MEM * 0x100000) - $initrdlen) & -$INITRDALIGN )) 5.469 - store 32 $RamfsAdrOfs $(( $ADRSRD )) $bs initrd adrs 5.470 - store 32 $RamfsLenOfs $initrdlen $bs initrdlen 5.471 - done 5.472 + [ -n "$NOSYSSIZEFIX" ] || store 32 0x1F4 $syssz $bs fix system size 5.473 5.474 - [ -n "$NOSYSSIZEFIX" ] || store 32 0x1F4 \ 5.475 - $(( ($(stat -c %s $KERNEL)+15)/16 - ($setupsz+1)*32)) $bs fix system size 5.476 - 5.477 - # Output boot sector + setup + cmdline 5.478 + # Output boot sector + setup + cmdline + info 5.479 ddq if=$bs 5.480 5.481 # Output kernel code 5.482 - syssz=$(( ($(getlong 0x1F4 $bs)+31)/32 )) 5.483 - cat $KERNEL /dev/zero | ddq bs=512 skip=$(( $setupsz+1 )) count=$syssz conv=sync 5.484 + [ $INITRDDISKALIGN -ne 0 ] && 5.485 + INITRDDISKALIGN=$(($INITRDDISKALIGN/512-$sysszsect-$extra-$setupsz-1)) 5.486 + cat $KERNEL /dev/zero | ddq bs=512 skip=$(( $setupsz+1 )) \ 5.487 + count=$(($sysszsect+$INITRDDISKALIGN)) conv=sync 5.488 5.489 # Output initramfs 5.490 - for i in $( echo $INITRD | sed 's/,/ /' ); do 5.491 + padding=$INITRDPAD 5.492 + for i in ${INITRD//,/ }; do 5.493 [ -s "$i" ] || continue 5.494 + [ $padding -eq $INITRDPAD ] || ddq if=/dev/zero bs=1 count=$padding 5.495 ddq if=$i 5.496 + trace "initrd $i ($(stat -c %s $i) bytes) padding $INITRDPAD" 5.497 padding=$(( $INITRDPAD - ($(stat -c %s $i) % $INITRDPAD) )) 5.498 - [ $padding -eq $INITRDPAD ] || ddq if=/dev/zero bs=1 count=$padding 5.499 done 5.500 5.501 # Cleanup
6.1 --- a/mirror/floppies/builder/index.php Wed Jun 03 10:26:51 2015 +0300 6.2 +++ b/mirror/floppies/builder/index.php Fri Jul 31 18:40:18 2015 +0200 6.3 @@ -12,6 +12,20 @@ 6.4 <meta name="author" content="SliTaz Contributors" /> 6.5 <meta http-equiv="Refresh" content="0;url=http://mirror1.slitaz.org/floppies/builder/index.php"> 6.6 </head> 6.7 +<body> 6.8 + <script type="text/javascript"> 6.9 + window.location.replace('http://mirror1.slitaz.org/floppies/builder/index.php') 6.10 + </script> 6.11 + <noscript> 6.12 + <frameset rows="100%"> 6.13 + <frame src="http://mirror1.slitaz.org/floppies/builder/index.php"> 6.14 + <noframes> 6.15 + <body>Please follow <a href="http://mirror1.slitaz.org/floppies/builder/index.php 6.16 + ">this link</a>.</body> 6.17 + </noframes> 6.18 + </frameset> 6.19 + </noscript> 6.20 +</body> 6.21 </html> 6.22 <?php 6.23 } 6.24 @@ -51,6 +65,10 @@ 6.25 <link rel="stylesheet" type="text/css" href="../static/slitaz.css" /> 6.26 <style type="text/css"> 6.27 6.28 +// input[type=submit] { 6.29 +// cursor: pointer; 6.30 +// } 6.31 + 6.32 input[type=text] { 6.33 width: inherit; 6.34 } 6.35 @@ -72,6 +90,9 @@ 6.36 text-align: center; 6.37 } 6.38 6.39 +// #cmdline:hover, #cmdline:foqus, #cmdline:not([value=""]) { width: 200px; } 6.40 +// #cmdline { width: 50px; } 6.41 + 6.42 </style> 6.43 </head> 6.44 <body bgcolor="#ffffff"> 6.45 @@ -201,10 +222,6 @@ 6.46 ", ".$_FILES["initrd"]['name']. 6.47 " and ".$_FILES["initrd2"]['name']; 6.48 } 6.49 - if ($size >= 15 * 1024 * 1024) { 6.50 - error($msg." exceeds 15 MB."); 6.51 - $size = 0; 6.52 - } 6.53 if ($size == 0) { 6.54 if (isset($tmp_dir)) 6.55 system("rm -f $tmp_dir"); 6.56 @@ -281,9 +298,7 @@ 6.57 $max = rtrim(ini_get('upload_max_filesize'),"M"); 6.58 $max_post = rtrim(ini_get('post_max_size'),"M"); 6.59 if ($max_post < $max) $max = $max_post; 6.60 - $msg = "the <acronym title=\"The linux kernel boot sector\">tiny boot loader</acronym> can't load more than 15 MB"; 6.61 - if ($max < 16) 6.62 - $msg = "the web server can't upload more than $max MB"; 6.63 + $msg = "the web server can't upload more than $max MB"; 6.64 ?> 6.65 <form method="post" enctype="multipart/form-data" action="<?php echo $_SERVER["PHP_SELF"]; ?>"> 6.66 <table> 6.67 @@ -305,7 +320,7 @@ 6.68 </tr> 6.69 <tr> 6.70 <td>Default cmdline:</td> 6.71 - <td><input type="text" name="cmdline" size="36" <?php 6.72 + <td id="cmdline"><input type="text" name="cmdline" size="36" <?php 6.73 if (isset($_GET['cmdline'])) echo 'value="'.$_GET['cmdline'].'"'; 6.74 ?>/> <input type="checkbox" name="edit" checked="checked" />edit 6.75 <i>optional</i></td> 6.76 @@ -582,26 +597,14 @@ 6.77 <a href="http://validator.w3.org/check?uri=referer"><img src="../static/xhtml10.png" alt="Valid XHTML 1.0" title="Code validé XHTML 1.0" style="width: 80px; height: 15px;" /></a> 6.78 </p> 6.79 <p> 6.80 + <img src="#" id="qrcodeimg" alt="#" width="60" height="60" 6.81 + onmouseover= "this.title = location.href" 6.82 + onclick= "this.width = this.height = 300;" /> 6.83 + <script type="text/javascript" src="../static/qrcode.js"></script> 6.84 <script type="text/javascript"> 6.85 - function QRCodePNG(str, obj) { 6.86 - try { 6.87 - obj.height = obj.width += 300; 6.88 - return QRCode.generatePNG(str, {ecclevel: 'H'}); 6.89 - } 6.90 - catch (any) { 6.91 - var element = document.createElement("script"); 6.92 - element.src = "../static/qrcode.js"; 6.93 - element.type ="text/javascript"; 6.94 - element.onload = function() { 6.95 - obj.src = QRCode.generatePNG(str, {ecclevel: 'H'}); 6.96 - }; 6.97 - document.body.appendChild(element); 6.98 - } 6.99 - } 6.100 + document.getElementById('qrcodeimg').src = 6.101 + QRCode.generatePNG(location.href, {ecclevel: 'H'}); 6.102 </script> 6.103 - <img src="../static/qr.png" alt="#" 6.104 - onmouseover= "this.title = location.href" 6.105 - onclick="this.src = QRCodePNG(location.href, this)" /> 6.106 </p> 6.107 </div> 6.108
7.1 --- a/mirror/floppies/download.php Wed Jun 03 10:26:51 2015 +0300 7.2 +++ b/mirror/floppies/download.php Fri Jul 31 18:40:18 2015 +0200 7.3 @@ -60,6 +60,9 @@ 7.4 text-align: center; 7.5 } 7.6 7.7 +#block_nav { 7.8 + padding: 10px 10px 10px; 7.9 +} 7.10 </style> 7.11 </head> 7.12 <body bgcolor="#ffffff"> 7.13 @@ -151,7 +154,7 @@ 7.14 <!-- Start of footer and copy notice --> 7.15 <div id="copy"> 7.16 <p> 7.17 -Copyright © <span class="year"></span> <a href="http://www.slitaz.org/">SliTaz</a> - 7.18 +Copyright © <?php echo date('Y'); ?> <a href="http://www.slitaz.org/">SliTaz</a> - 7.19 <a href="http://www.gnu.org/licenses/gpl.html">GNU General Public License</a> 7.20 </p> 7.21 <!-- End of copy --> 7.22 @@ -160,7 +163,17 @@ 7.23 <!-- Bottom and logo's --> 7.24 <div id="bottom"> 7.25 <p> 7.26 -<a href="http://validator.w3.org/check?uri=referer"><img src="../css/pics/website/xhtml10.png" alt="Valid XHTML 1.0" title="Code validé XHTML 1.0" style="width: 80px; height: 15px;" /></a> 7.27 +<a href="http://validator.w3.org/check?uri=referer"><img src="static/xhtml10.png" alt="Valid XHTML 1.0" title="Code validé XHTML 1.0" style="width: 80px; height: 15px;" /></a> 7.28 +</p> 7.29 +<p> 7.30 + <script type="text/javascript" src="static/qrcode.js"></script> 7.31 + <img src="#" id="qrcodeimg" alt="#" width="60" height="60" 7.32 + onmouseover="this.title = location.href" 7.33 + onclick="this.width = this.height += 100;" /> 7.34 + <script type="text/javascript"> 7.35 + document.getElementById('qrcodeimg').src = 7.36 + QRCode.generatePNG(location.href, {ecclevel: 'H'}); 7.37 + </script> 7.38 </p> 7.39 </div> 7.40
8.1 --- a/mirror/floppies/floppies Wed Jun 03 10:26:51 2015 +0300 8.2 +++ b/mirror/floppies/floppies Fri Jul 31 18:40:18 2015 +0200 8.3 @@ -2,26 +2,42 @@ 8.4 8.5 rd() 8.6 { 8.7 - echo $(od -j $((0x$1)) -N ${2:-4} -t u${2:-4} -An kernel) 8.8 + echo $(od -j $(($1)) -N ${2:-4} -t u${2:-4} -An ${3:-kernel}) 8.9 } 8.10 8.11 ds() 8.12 { 8.13 - dd count=$1 bs=${2:-512} 2>/dev/null 8.14 + dd count=$((($1*${2:-512})/512)) bs=512 2>/dev/null 8.15 + dd count=$(((($1*${2:-512})%512)/${2:-512})) bs=${2:-512} 2>/dev/null 8.16 } 8.17 8.18 case "$1" in 8.19 extract) ( 8.20 ds 1 8.21 - ds $(rd 1F1 1) 8.22 - [ $(rd 228) -ne 0 ] && ds 1 | strings >cmdline 8.23 - ds $(( ($(rd 1F4) +31) /32)) ) >kernel 8.24 - ds $(( ($(rd 21C) +3) /4)) 4 >rootfs 8.25 + ds $(($(rd 0x1F1 1)-1)) 8.26 + [ $(rd 0x228 2) -le $(($(rd 0x1F1 1)*512)) ] || ds 1 8.27 + [ $(rd 0x228) -ne 0 ] && ds 1 >cmdline$$ 8.28 + ds $(( ($(rd 0x1F4) +31) /32)) ) >kernel 8.29 + if [ $(rd 0x21C) -ne 0 ]; then 8.30 + ds $(( ($(rd 0x21C) +3) /4)) 4 >rootfs 8.31 + elif [ $(rd 0x218) -ne 0 ]; then 8.32 + n=$(($(rd 0x1EE 2)%512)) 8.33 + i=0 8.34 + while [ $(($n % 256)) -lt $(rd 0x1F0 1) ]; do 8.35 + ds $(( ($(rd $n 4 cmdline$$) +3) /4)) 4 >rootfs$i 8.36 + n=$(($n+4)) 8.37 + i=$(($i+1)) 8.38 + done 8.39 + fi 8.40 + if [ -s cmdline$$ ]; then 8.41 + strings <cmdline$$ | sed q >cmdline 8.42 + rm -f cmdline$$ 8.43 + fi 8.44 ;; 8.45 *) cat <<EOT 8.46 -usage: 8.47 +usage: cat fd*.img | $0 extract or 8.48 # cat fd0*.img | $0 extract 8.49 - creates kernel, rootfs and cmdline files 8.50 + creates kernel, rootfs(es) and cmdline files 8.51 EOT 8.52 for i in 1 2 3; do 8.53 j=" cat fd$i*.img |"
9.1 --- a/mirror/floppies/loram-1.0/description.html Wed Jun 03 10:26:51 2015 +0300 9.2 +++ b/mirror/floppies/loram-1.0/description.html Fri Jul 31 18:40:18 2015 +0200 9.3 @@ -23,3 +23,8 @@ 9.4 The loram bootstrap will then start and you will be prompted to insert extra floppies 9.5 for the core flavor. You can bypass this by using Q and Enter. 9.6 </p> 9.7 +<p> 9.8 +If you have an ext3 partition on your hard disk, the bootstrap can create the 9.9 +installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 9.10 +on your hard disk without extra media. 9.11 +</p>
10.1 --- a/mirror/floppies/loram-2.0/description.html Wed Jun 03 10:26:51 2015 +0300 10.2 +++ b/mirror/floppies/loram-2.0/description.html Fri Jul 31 18:40:18 2015 +0200 10.3 @@ -27,3 +27,8 @@ 10.4 The loram bootstrap will then start and you will be prompted to insert extra floppies 10.5 for base, justx and core flavors. You can bypass this by using Q and Enter. 10.6 </p> 10.7 +<p> 10.8 +If you have an ext3 partition on your hard disk, the bootstrap can create the 10.9 +installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 10.10 +on your hard disk without extra media. 10.11 +</p>
11.1 --- a/mirror/floppies/loram-3.0/description.html Wed Jun 03 10:26:51 2015 +0300 11.2 +++ b/mirror/floppies/loram-3.0/description.html Fri Jul 31 18:40:18 2015 +0200 11.3 @@ -7,11 +7,11 @@ 11.4 base provides the minimum slitaz distribution subset in text mode. 11.5 </li> 11.6 <li> 11.7 - <b>justx</b> needs 64M of RAM and 12 floppies: <i>fd001.img</i> to <i>fd205.img</i>.<br /> 11.8 + <b>justx</b> needs 64M of RAM and 13 floppies: <i>fd001.img</i> to <i>fd106.img</i>.<br /> 11.9 justx provides the minimum slitaz distribution subset with X11 support. 11.10 </li> 11.11 <li> 11.12 - <b>core</b> needs 96M of RAM and 24 floppies: <i>fd001.img</i> to <i>fd311.img</i>.<br /> 11.13 + <b>core</b> needs 96M of RAM and 24 floppies: <i>fd001.img</i> to <i>fd210.img</i>.<br /> 11.14 core provides the default slitaz distribution. 11.15 </li> 11.16 </ul> 11.17 @@ -21,9 +21,9 @@ 11.18 </p> 11.19 <p> 11.20 The floppy is then loaded into memory (one dot each 64k) and you will be prompted to 11.21 -insert the next floppy, <i>fd002.img</i>. 11.22 +insert the next floppy, <i>fd002.img</i>. And so on up to last floppy. 11.23 </p> 11.24 <p> 11.25 -The loram bootstrap will then start and you will be prompted to insert extra floppies 11.26 -for base, justx and core flavors. You can bypass this by using Q and Enter. 11.27 +You will be prompted to insert extra floppies for justx, gtkonly and core flavors. 11.28 +You can bypass this by using B to boot without loading extra floppies. 11.29 </p>
12.1 --- a/mirror/floppies/loram-4.0/description.html Wed Jun 03 10:26:51 2015 +0300 12.2 +++ b/mirror/floppies/loram-4.0/description.html Fri Jul 31 18:40:18 2015 +0200 12.3 @@ -7,15 +7,15 @@ 12.4 base provides the minimum slitaz distribution subset in text mode. 12.5 </li> 12.6 <li> 12.7 - <b>justx</b> needs 64M of RAM and 13 floppies: <i>fd001.img</i> to <i>fd206.img</i>.<br /> 12.8 + <b>justx</b> needs 64M of RAM and 13 floppies: <i>fd001.img</i> to <i>fd106.img</i>.<br /> 12.9 justx provides the minimum slitaz distribution subset with X11 support. 12.10 </li> 12.11 <li> 12.12 - <b>gtkonly</b> needs 96M of RAM and 18 floppies: <i>fd001.img</i> to <i>fd304.img</i>.<br /> 12.13 + <b>gtkonly</b> needs 96M of RAM and 18 floppies: <i>fd001.img</i> to <i>fd204.img</i>.<br /> 12.14 gtkonly provides the minimum slitaz distribution subset with Gtk+ support. 12.15 </li> 12.16 <li> 12.17 - <b>core</b> needs 128M of RAM and 28 floppies: <i>fd001.img</i> to <i>fd409.img</i>.<br /> 12.18 + <b>core</b> needs 128M of RAM and 28 floppies: <i>fd001.img</i> to <i>fd309.img</i>.<br /> 12.19 core provides the default slitaz distribution. 12.20 </li> 12.21 </ul> 12.22 @@ -25,9 +25,9 @@ 12.23 </p> 12.24 <p> 12.25 The floppy is then loaded into memory (one dot each 64k) and you will be prompted to 12.26 -insert the next floppy, <i>fd002.img</i>. 12.27 +insert the next floppy, <i>fd002.img</i>. And so on up to last floppy. 12.28 </p> 12.29 <p> 12.30 -The loram bootstrap will then start and you will be prompted to insert extra floppies 12.31 -for base, justx and core flavors. You can bypass this by using Q and Enter. 12.32 +You will be prompted to insert extra floppies for justx, gtkonly and core flavors. 12.33 +You can bypass this by using B to boot without loading extra floppies. 12.34 </p>
13.1 --- a/mirror/floppies/menu.css Wed Jun 03 10:26:51 2015 +0300 13.2 +++ b/mirror/floppies/menu.css Fri Jul 31 18:40:18 2015 +0200 13.3 @@ -17,6 +17,7 @@ 13.4 } 13.5 #menu li a:hover { 13.6 color: #ffffff; 13.7 + //background-color: #d66018; 13.8 background-color: #ccc; 13.9 border-top-right-radius: 3px; 13.10 border-top-left-radius: 3px; 13.11 @@ -48,6 +49,7 @@ 13.12 border: 1px solid #f1efeb; 13.13 } 13.14 #menu li li a:hover { 13.15 + //background-color: #d66018; 13.16 background-color: #ccc; 13.17 color: #ffffff; 13.18 border-radius: 2px;
14.1 --- a/mirror/floppies/mini-1.0/description.html Wed Jun 03 10:26:51 2015 +0300 14.2 +++ b/mirror/floppies/mini-1.0/description.html Fri Jul 31 18:40:18 2015 +0200 14.3 @@ -13,3 +13,8 @@ 14.4 The floppy is then loaded into memory (one dot each 64k) and you will be prompted to 14.5 insert the next floppy, <i>fd002.img</i>. And so on up to <i>fd005.img</i>. 14.6 </p> 14.7 +<p> 14.8 +If you have an ext3 partition on your hard disk, the bootstrap can create the 14.9 +installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 14.10 +on your hard disk without extra media. 14.11 +</p>
15.1 --- a/mirror/floppies/mini-2.0/description.html Wed Jun 03 10:26:51 2015 +0300 15.2 +++ b/mirror/floppies/mini-2.0/description.html Fri Jul 31 18:40:18 2015 +0200 15.3 @@ -13,3 +13,8 @@ 15.4 The floppy is then loaded into memory (one dot each 64k) and you will be prompted to 15.5 insert the next floppy, <i>fd002.img</i>. And so on up to <i>fd006.img</i>. 15.6 </p> 15.7 +<p> 15.8 +If you have an ext3 partition on your hard disk, the bootstrap can create the 15.9 +installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 15.10 +on your hard disk without extra media. 15.11 +</p>
16.1 --- a/mirror/floppies/mini-3.0/description.html Wed Jun 03 10:26:51 2015 +0300 16.2 +++ b/mirror/floppies/mini-3.0/description.html Fri Jul 31 18:40:18 2015 +0200 16.3 @@ -13,3 +13,8 @@ 16.4 The floppy is then loaded into memory (one dot each 64k) and you will be prompted to 16.5 insert the next floppy, <i>fd002.img</i>. And so on up to <i>fd006.img</i>. 16.6 </p> 16.7 +<p> 16.8 +If you have an ext3 partition on your hard disk, the bootstrap can create the 16.9 +installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 16.10 +on your hard disk without extra media. 16.11 +</p>
17.1 --- a/mirror/floppies/mini-4.0/description.html Wed Jun 03 10:26:51 2015 +0300 17.2 +++ b/mirror/floppies/mini-4.0/description.html Fri Jul 31 18:40:18 2015 +0200 17.3 @@ -13,3 +13,8 @@ 17.4 The floppy is then loaded into memory (one dot each 64k) and you will be prompted to 17.5 insert the next floppy, <i>fd002.img</i>. And so on up to <i>fd006.img</i>. 17.6 </p> 17.7 +<p> 17.8 +If you have an ext3 partition on your hard disk, the bootstrap can create the 17.9 +installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 17.10 +on your hard disk without extra media. 17.11 +</p>
18.1 --- a/mirror/floppies/mkindex.sh Wed Jun 03 10:26:51 2015 +0300 18.2 +++ b/mirror/floppies/mkindex.sh Fri Jul 31 18:40:18 2015 +0200 18.3 @@ -172,13 +172,6 @@ 18.4 Each floppy set detects disk swaps and can be used without a keyboard. 18.5 </p> 18.6 EOT 18.7 - [ -s $DIR/fd100.img ] && cat <<EOT 18.8 -<p> 18.9 -If you have an ext3 partition on your hard disk, the bootstrap can create the 18.10 -installation script <u>slitaz/install.sh</u>. You will be able to install SliTaz 18.11 -on your hard disk without extra media. 18.12 -</p> 18.13 -EOT 18.14 cat <<EOT 18.15 <p> 18.16 Good luck. 18.17 @@ -218,13 +211,18 @@ 18.18 </pre> 18.19 18.20 <h2>Images generation</h2> 18.21 -<p> 18.22 -All these floppy images are built with <b>bootfloppybox</b> from 18.23 -a <i>core</i> or a <i>4in1</i> iso. The <i>loram</i> is preprocessed by 18.24 -<b>tazlitobox</b> (Low RAM tab). These tools are available since 3.0. 18.25 -You can extract the <u>kernel</u>, <u>cmdline</u> and <u>rootfs</u> files with 18.26 -<a href="floppies">this tool</a> 18.27 -</p> 18.28 +<ul> 18.29 + <li>All these floppy images are built from a <i>core</i> 18.30 + or a <i>Nin1</i> iso.</li> 18.31 + <li>The <i>loram</i> is preprocessed by <b>tazlitobox</b> (Low RAM tab) 18.32 + or <b>tazlito build-loram</b>.</li> 18.33 + <li>The versions 1.0 and 2.0 are built with <b>bootfloppybox</b> 18.34 + available since 3.0.</li> 18.35 + <li>The newer versions are built with <b>taziso floppyset</b> 18.36 + available since 5.0.</li> 18.37 + <li>You can extract the <u>kernel</u>, <u>cmdline</u> and 18.38 + <u>rootfs*</u> files with <a href="floppies">this tool</a></li> 18.39 +</ul> 18.40 18.41 <!-- End of content with round corner --> 18.42 </div>