SliTaz Repositories

     1.1 --- a/get-softmodem-driver/receipt	Tue Jun 16 14:58:16 2009 +0000
     1.2 +++ b/get-softmodem-driver/receipt	Tue Jun 16 21:41:05 2009 +0200
     1.3 @@ -1,11 +1,11 @@
     1.4  # SliTaz package receipt.
     1.5  
     1.6  PACKAGE="get-softmodem-driver"
     1.7 -VERSION="0.6"
     1.8 +VERSION="0.7"
     1.9  CATEGORY="non-free"
    1.10  SHORT_DESC="Get misc softmodem drivers."
    1.11  MAINTAINER="domcox@slitaz.org"
    1.12 -DEPENDS="cpio linux-source slitaz-toolchain"
    1.13 +DEPENDS="alsa-lib-dev cpio linux-source slitaz-toolchain"
    1.14  WEB_SITE="http://hg.slitaz.org/wok/file/$PACKAGE/stuff/$PACKAGE"
    1.15  
    1.16  # Rules to gen a SliTaz package suitable for Tazpkg.

     2.1 --- a/get-softmodem-driver/stuff/get-softmodem-driver	Tue Jun 16 14:58:16 2009 +0000
     2.2 +++ b/get-softmodem-driver/stuff/get-softmodem-driver	Tue Jun 16 21:41:05 2009 +0200
     2.3 @@ -25,6 +25,9 @@
     2.4  martian)
     2.5  	. /usr/share/softmodem/martian.receipt
     2.6  	echo "Support for the Agere Systems PCI Modem built on DSP 164x (Mars) series." ;;
     2.7 +slmodem)
     2.8 +	. /usr/share/softmodem/slmodem.receipt
     2.9 +	echo "Support for the SmartLink Softmodem" ;;
    2.10  *)
    2.11  	echo "Unknown modem driver. Please run one of the following commands:"
    2.12  	for i in $(cd $(dirname $0); ls get-*-driver); do
    2.13 @@ -61,7 +64,7 @@
    2.14  
    2.15  # Get files
    2.16  cd /usr/src
    2.17 -echo "Checking for source tarball... "
    2.18 +echo "Checking for source tarball... $WGET_URL"
    2.19  if [ ! -f "$TARBALL" ]; then 
    2.20  	wget $WGET_URL
    2.21  	# Exit if download failed to avoid errors.
    2.22 @@ -106,6 +109,7 @@
    2.23  	mv $src $fs/usr/src
    2.24  	;;
    2.25  hcfpcimodem)
    2.26 +	untested
    2.27  	# Rules to configure and make the package.
    2.28  	cd $src
    2.29  	echo "Apply $file..."
    2.30 @@ -138,6 +142,28 @@
    2.31  	cp -a kmodule/martian_dev.ko $fs/lib/modules/`uname -r`/martian
    2.32  	mkdir -p $fs/etc/init.d
    2.33  	cp -a /usr/share/softmodem/martian.init $fs/etc/init.d/martian
    2.34 +	rm -rf $src
    2.35 +	;;
    2.36 +slmodem)
    2.37 +	untested
    2.38 +	# build modules
    2.39 +	cd $src
    2.40 +	make clean
    2.41 +	make drivers
    2.42 +	# Build slmodemd with ALSA support
    2.43 +	cd modem
    2.44 +	make clean
    2.45 +	make SUPPORT_ALSA=1
    2.46 +	# install
    2.47 +	cd $src
    2.48 +	mkdir -p $fs/lib/modules/`uname -r`/slamr
    2.49 +	cp -a drivers/*ko $fs/lib/modules/`uname -r`/slamr
    2.50 +	mkdir -p $fs/usr/sbin
    2.51 +	cp -a modem/slmodemd $fs/usr/sbin
    2.52 +	mkdir -p $fs/etc/init.d
    2.53 +	cp -a /usr/share/softmodem/slmodem.init $fs/etc/init.d/slmodem
    2.54 +	rm -rf $src
    2.55 +	;;
    2.56  esac
    2.57  
    2.58  # Create receipt

     3.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     3.2 +++ b/get-softmodem-driver/stuff/slmodem.init	Tue Jun 16 21:41:05 2009 +0200
     3.3 @@ -0,0 +1,62 @@
     3.4 +#!/bin/sh
     3.5 +# /etc/init.d/slmodem: Start, stop and restart slmodemd deamon on SliTaz, at boot
     3.6 +# time or with the command line.
     3.7 +#
     3.8 +# To start daemon at boot time, just put the right name in the $RUN_DAEMONS
     3.9 +# variable of /etc/rcS.conf and configure options with /etc/daemons.conf.
    3.10 +#
    3.11 +. /etc/init.d/rc.functions
    3.12 +. /etc/daemons.conf
    3.13 +
    3.14 +NAME=Smartlink modem
    3.15 +DESC="Smart Link Modem deamon"
    3.16 +DAEMON=/usr/sbin/slmodemd
    3.17 +OPTIONS=""
    3.18 +PIDFILE=/var/run/slmodemd.pid
    3.19 +
    3.20 +if [ `/sbin/lsmod | grep -c martian_dev}` -lt "1" ]; then
    3.21 +	echo "kernel module is not loaded!"
    3.22 +	exit 1
    3.23 +fi
    3.24 +
    3.25 +case "$1" in
    3.26 +  start)
    3.27 +    if [ -f $PIDFILE ] ; then
    3.28 +      echo "$NAME already running."
    3.29 +      exit 1
    3.30 +    fi
    3.31 +    echo -n "Starting $DESC: $NAME... "
    3.32 +    $DAEMON $OPTIONS
    3.33 +    status
    3.34 +	echo `/sbin/pidof $DAEMON` > $PIDFILE
    3.35 +    ;;
    3.36 +  stop)
    3.37 +    if [ ! -f $PIDFILE ] ; then
    3.38 +      echo "$NAME is not running."
    3.39 +      exit 1
    3.40 +    fi
    3.41 +    echo -n "Stopping $DESC: $NAME... "
    3.42 +    kill `cat $PIDFILE`
    3.43 +    status
    3.44 +    ;;
    3.45 +  restart)
    3.46 +    if [ ! -f $PIDFILE ] ; then
    3.47 +      echo "$NAME is not running."
    3.48 +      exit 1
    3.49 +    fi
    3.50 +    echo -n "Restarting $DESC: $NAME... "
    3.51 +    kill `cat $PIDFILE`
    3.52 +    sleep 2
    3.53 +    $DAEMON $OPTIONS
    3.54 +    status
    3.55 +	echo `/sbin/pidof $DAEMON` > $PIDFILE
    3.56 +    ;;
    3.57 +  *)
    3.58 +    echo ""
    3.59 +    echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]"
    3.60 +    echo ""
    3.61 +    exit 1
    3.62 +    ;;
    3.63 +esac
    3.64 +
    3.65 +exit 0

     4.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     4.2 +++ b/get-softmodem-driver/stuff/slmodem.receipt	Tue Jun 16 21:41:05 2009 +0200
     4.3 @@ -0,0 +1,19 @@
     4.4 +# SliTaz package receipt.
     4.5 +
     4.6 +PACKAGE="slmodem"
     4.7 +VERSION="2.9.11-20090222"
     4.8 +CATEGORY="non-free"
     4.9 +SHORT_DESC="Modem driver for Smartlink Modem."
    4.10 +MAINTAINER="domcox@slitaz.org"
    4.11 +TARBALL="$PACKAGE-$VERSION.tar.gz"
    4.12 +DEPENDS="module-init-tools linux-source"
    4.13 +WEB_SITE="http://linmodems.technion.ac.il"
    4.14 +WGET_URL="http://linmodems.technion.ac.il/packages/smartlink/$TARBALL"
    4.15 +
    4.16 +# Rules to gen a SliTaz package suitable for Tazpkg.
    4.17 +
    4.18 +post_install()
    4.19 +{
    4.20 +	depmod -a
    4.21 +	/sbin/modprobe slamr && /etc/init.d/slmodem start
    4.22 +}