# HG changeset patch
# User Aleksej Bobylev <al.bobylev@gmail.com>
# Date 1429796859 -10800
# Node ID c9e270dd464f22452965f3f7559c83734192d1c0
# Parent  70c7a787c969cccf8c2ae99166ec371eb68fd96f
Add few descriptions (from pkgs.org)

diff -r 70c7a787c969 -r c9e270dd464f 915resolution/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/915resolution/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,12 @@
+915resolution is a tool to modify the video BIOS of the 800 and 900 series Intel
+graphics chipsets. This includes the 845G, 855G, and 865G chipsets, as well as
+915G, 915GM, and 945G chipsets. This modification is necessary to allow the
+display of certain graphics resolutions for an Xorg or XFree86 graphics server.
+
+915resolution's modifications of the BIOS are transient. There is no risk of
+permanent modification of the BIOS. This also means that 915resolution must be
+run every time the computer boots inorder for it's changes to take effect.
+
+915resolution is derived from the tool 855resolution. However, the code
+differs substantially. 915resolution's code base is much simpler. 915resolution
+also allows the modification of bits per pixel.
diff -r 70c7a787c969 -r c9e270dd464f 915resolution/receipt
--- a/915resolution/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/915resolution/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="915resolution"
 VERSION="0.5.3"
 CATEGORY="system-tools"
-SHORT_DESC="Widescreen support; modify video BIOS of the 800 and 900 series Intel graphics chipsets"
+SHORT_DESC="Intel video BIOS hack to support certain resolutions"
 MAINTAINER="erjo@slitaz.org"
 LICENSE="PublicDomain"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
@@ -16,7 +16,6 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	cd $src
 	for i in widescreen-resolution cedarview ; do
 		[ -f done.$i ] && continue
 		patch -p0 < $stuff/$PACKAGE-$VERSION-$i.patch
@@ -32,4 +31,3 @@
 	install $src/$PACKAGE $fs/usr/sbin
 	install $src/dump_bios $fs/usr/sbin
 }
-
diff -r 70c7a787c969 -r c9e270dd464f dbus/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/dbus/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,11 @@
+D-Bus is a message bus, used for sending messages between applications.
+Conceptually, it fits somewhere in between raw sockets and CORBA in terms of
+complexity.
+
+D-Bus supports broadcast messages, asynchronous messages (thus decreasing
+latency), authentication, and more. It is designed to be low-overhead; messages
+are sent using a binary protocol, not using XML. D-Bus also supports a method
+call mapping for its messages, but it is not required; this makes using the
+system quite simple.
+
+It comes with several bindings, including GLib, Python, Qt and Java.
diff -r 70c7a787c969 -r c9e270dd464f desktop-file-utils/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/desktop-file-utils/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,6 @@
+Some utilities to make dealing with .desktop files easier:
+  * update-desktop-database -- update the desktop-MIME mapping
+  * desktop-file-validate -- validate a desktop file
+  * desktop-file-install -- install a desktop file, munging en route.
+
+This package contains update-desktop-database only.
diff -r 70c7a787c969 -r c9e270dd464f desktop-file-utils/receipt
--- a/desktop-file-utils/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/desktop-file-utils/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="desktop-file-utils"
 VERSION="0.21"
 CATEGORY="x-window"
-SHORT_DESC="Desktop file utils from Freedesktop (update-desktop-database)."
+SHORT_DESC="Utilities for .desktop files (update-desktop-database)"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
@@ -16,7 +16,6 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	cd $src
 	./configure \
 		--prefix=/usr \
 		$CONFIGURE_ARGS &&
diff -r 70c7a787c969 -r c9e270dd464f dropbear/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/dropbear/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,8 @@
+dropbear is a SSH 2 server and client designed to be small enough to be used in
+small memory environments, while still being functional and secure enough for
+general use.
+
+It implements most required features of the SSH 2 protocol, and other
+features such as X11 and authentication agent forwarding.
+
+See http://matt.ucc.asn.au/dropbear/dropbear.html
diff -r 70c7a787c969 -r c9e270dd464f dropbear/receipt
--- a/dropbear/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/dropbear/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="dropbear"
 VERSION="2015.67"
 CATEGORY="security"
-SHORT_DESC="Light SSH client and server."
+SHORT_DESC="Lightweight SSH2 server and client"
 MAINTAINER="pascal.bellard@slitaz.org"
 LICENSE="MIT"
 TARBALL="$PACKAGE-$VERSION.tar.bz2"
diff -r 70c7a787c969 -r c9e270dd464f expat/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/expat/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,3 @@
+This package contains the runtime, shared library of expat, the C library for
+parsing XML. Expat is a stream-oriented parser in which an application registers
+handlers for things the parser might find in the XML document (like start tags).
diff -r 70c7a787c969 -r c9e270dd464f expat/receipt
--- a/expat/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/expat/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="expat"
 VERSION="2.1.0"
 CATEGORY="x-window"
-SHORT_DESC="XML parsing library."
+SHORT_DESC="XML parsing C library"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="MIT"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
@@ -14,7 +14,6 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	cd $src
 	./configure $CONFIGURE_ARGS &&
 	make && make DESTDIR=$DESTDIR install
 }
@@ -23,9 +22,9 @@
 genpkg_rules()
 {
 	mkdir -p $fs/usr/lib $fs/usr/bin
-    cp -a $install/usr/bin/* $fs/usr/bin
-    cp -a $install/usr/lib/*.so* $fs/usr/lib
-    # expat so.0 symbolic link.
-    cd $fs/usr/lib
-    ln -s libexpat.so.1.*.* libexpat.so.0
+	cp -a $install/usr/bin/* $fs/usr/bin
+	cp -a $install/usr/lib/*.so* $fs/usr/lib
+	# expat so.0 symbolic link.
+	cd $fs/usr/lib
+	ln -s libexpat.so.1.*.* libexpat.so.0
 }
diff -r 70c7a787c969 -r c9e270dd464f gpicview/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gpicview/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,6 @@
+GPicView is a lightweight GTK+ 2.x based image viewer with following features:
+  * Extremely lightweight and fast with low memory usage
+  * Very suitable for default image viewer of desktop system
+  * Simple and intuitive interface
+  * Minimal lib dependency: Only pure GTK+ is used
+  * Desktop independent: Doesn't require any specific desktop environment
diff -r 70c7a787c969 -r c9e270dd464f gpicview/receipt
--- a/gpicview/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/gpicview/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="gpicview"
 VERSION="0.2.4"
 CATEGORY="graphics"
-SHORT_DESC="Light pictures viewer."
+SHORT_DESC="Lightweight image viewer"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
 WEB_SITE="http://lxde.sourceforge.net/gpicview/"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="gtk+ expat glib libgio libpng jpeg zlib"
@@ -29,4 +30,3 @@
 	cp -a $install/usr/bin $fs/usr
 	cp -a $install/usr/share/$PACKAGE $fs/usr/share
 }
-
diff -r 70c7a787c969 -r c9e270dd464f libfm-dev/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libfm-dev/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,4 @@
+LibFM provides file management functions built on top of Glib/GIO giving
+a convenient higher-level API.
+
+This package contains the development files for builds using GTK+ library.
diff -r 70c7a787c969 -r c9e270dd464f libfm-dev/receipt
--- a/libfm-dev/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/libfm-dev/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="libfm-dev"
 VERSION="1.2.3"
 CATEGORY="development"
-SHORT_DESC="File manager library from LXDE, development files."
+SHORT_DESC="File management support (GTK+ GUI development files)"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://pcmanfm.sourceforge.net"
diff -r 70c7a787c969 -r c9e270dd464f libfm-gtk/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libfm-gtk/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,4 @@
+LibFM provides file management functions built on top of Glib/GIO giving
+a convenient higher-level API.
+
+This package contains the GTK+ version 2.0 GUI.
diff -r 70c7a787c969 -r c9e270dd464f libfm-gtk/receipt
--- a/libfm-gtk/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/libfm-gtk/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="libfm-gtk"
 VERSION="1.2.3"
 CATEGORY="system-tools"
-SHORT_DESC="GTK+ part of Libfm"
+SHORT_DESC="File management support (GTK+2 GUI library)"
 MAINTAINER="al.bobylev@gmail.com"
 LICENSE="GPL2"
 WEB_SITE="http://pcmanfm.sourceforge.net"
diff -r 70c7a787c969 -r c9e270dd464f libfm/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libfm/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,15 @@
+LibFM provides file management functions built on top of Glib/GIO, giving
+a convenient higher-level API.
+
+Some features:
+  * Desktop-independent, following FreeDesktop standards;
+  * Fast, light on memory usage, and responsive - well suited to less powerful
+    hardware such as netbooks and thin clients;
+  * Uses GIO/GVFS (like Nautilus) for Trash support and access to remote file
+    systems (FTP, SFTP, WebDAV, Windows shares, etc.);
+  * Clipboard operations are compatible with GTK+/GNOME and Qt/KDE;
+  * Supports both Drag-and-Drop, and the X Direct Save protocol;
+  * Reusable design with the core functions separated out to simplify porting
+    to other GUIs.
+
+This package contains the core library.
diff -r 70c7a787c969 -r c9e270dd464f libfm/receipt
--- a/libfm/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/libfm/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="libfm"
 VERSION="1.2.3"
 CATEGORY="system-tools"
-SHORT_DESC="File manager library from LXDE."
+SHORT_DESC="File management support (core library)"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
diff -r 70c7a787c969 -r c9e270dd464f lxappearance-dev/receipt
--- a/lxappearance-dev/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxappearance-dev/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,11 +3,12 @@
 PACKAGE="lxappearance-dev"
 VERSION="0.5.5"
 CATEGORY="development"
-SHORT_DESC="Devel files for LXappearance."
+SHORT_DESC="LXDE GTK+ theme switcher (development)"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WANTED="lxappearance"
 WEB_SITE="http://lxde.org/"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="gtk+-dev pkg-config"
diff -r 70c7a787c969 -r c9e270dd464f lxappearance-obconf/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxappearance-obconf/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,9 @@
+LXAppearance ObConf plugin.
+
+ObConf is a program used to configure OpenBox window manager developed by Dana
+Jansens, Tim Riley, and Javeed Shaikh. LXAppearance is a tool used to configure
+look and feels of the desktop written by Hong Jen Yee for LXDE project. This
+plugin is derived from ObConf as an attempt to integrate obconf with
+LXAppearance to provide a better user experience. Most of the source code are
+taken from ObConf written by its authors with some modifications added by
+LXAppearance developers to make it a plugin.
diff -r 70c7a787c969 -r c9e270dd464f lxappearance-obconf/receipt
--- a/lxappearance-obconf/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxappearance-obconf/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxappearance-obconf"
 VERSION="0.2.2"
 CATEGORY="x-window"
-SHORT_DESC="Openbox configuration plugin for LXappearance."
+SHORT_DESC="LXDE GTK+ theme switcher (plugin)"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
 WEB_SITE="http://lxde.org/"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="openbox lxappearance"
diff -r 70c7a787c969 -r c9e270dd464f lxappearance/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxappearance/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,14 @@
+LXAppearance is a GUI application for the Lightweight X11 Desktop Environment
+(LXDE).
+
+It is a new feature-rich GTK+ theme switcher able to change GTK+ themes, icon
+themes, and fonts used by applications. GNOME/KDE/Xfce user may use build-in
+theme, this works for GTK+ based lightweight desktop Environment.
+
+Features:
+  * Choose GTK+ theme
+  * Choose icon theme
+  * Install new icon theme
+  * Choose their favorite font
+  * Choose toolbar style
+  * See changes immediately in preview area
diff -r 70c7a787c969 -r c9e270dd464f lxappearance/receipt
--- a/lxappearance/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxappearance/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxappearance"
 VERSION="0.5.5"
 CATEGORY="x-window"
-SHORT_DESC="Desktop setting configuration utility from LXDE."
+SHORT_DESC="LXDE GTK+ theme switcher"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://lxde.sourceforge.net/"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="gtk+"
diff -r 70c7a787c969 -r c9e270dd464f lxde-icon-theme/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxde-icon-theme/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,4 @@
+LXDE-Icon-Theme is the standard icon theme for the Lightweight X11 Desktop
+Environment (LXDE).
+
+It is also known as the nuoveXT2 icon theme from which it is derived from.
diff -r 70c7a787c969 -r c9e270dd464f lxde-icon-theme/receipt
--- a/lxde-icon-theme/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxde-icon-theme/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxde-icon-theme"
 VERSION="0.5.1"
 CATEGORY="misc"
-SHORT_DESC="LXDE icon theme"
+SHORT_DESC="LXDE standard icon theme"
 MAINTAINER="al.bobylev@gmail.com"
 LICENSE="LGPL3"
 WEB_SITE="http://www.lxde.org/"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 
 DEPENDS=""
 BUILD_DEPENDS="coreutils"
diff -r 70c7a787c969 -r c9e270dd464f lxde/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxde/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,6 @@
+LXDE (the Lightweight X11 Desktop Environment) is a new project aimed to provide
+a new desktop environment which is lightweight and fast.
+
+This package is a metapackage depends on the core components and recommended
+components of the LXDE. It includes lxpanel, lxtask, lxappearance, lxsession,
+pcmanfm, lxinput, lxsession-edit, lxrandr, gpicview and leafpad.
diff -r 70c7a787c969 -r c9e270dd464f lxde/receipt
--- a/lxde/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxde/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,14 +3,14 @@
 PACKAGE="lxde"
 VERSION="0.3.2.1"
 CATEGORY="meta"
-SHORT_DESC="LXDE desktop environement meta package with SliTaz integration."
+SHORT_DESC="Meta-package for the Lightweight X11 Desktop Environement"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://lxde.org/"
-TAGS="window-manager desktop"
+TAGS="LXDE window-manager desktop"
 HOST_ARCH="i486 arm"
 
-SUGGESTED="lxterminal lxdm"
+SUGGESTED="lxterminal lxdm lxshortcut xarchiver"
 DEPENDS="xorg-libX11 gtk+ lxpanel lxtask lxappearance lxsession pcmanfm \
 lxsession-edit lxrandr lxinput openbox obconf gpicview leafpad slitaz-configs
 slitaz-tools-boxes"
diff -r 70c7a787c969 -r c9e270dd464f lxdm/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxdm/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,4 @@
+lxdm is a lightweight GUI login manager which can be used as a dropped-in
+replacement for GDM or KDM.
+
+Besides LXDE, lxdm can also work with KDE and others.
diff -r 70c7a787c969 -r c9e270dd464f lxdm/receipt
--- a/lxdm/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxdm/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxdm"
 VERSION="0.4.1"
 CATEGORY="x-window"
-SHORT_DESC="Login manager from LXDE."
+SHORT_DESC="GUI login manager for LXDE"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL3"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
 WEB_SITE="http://lxde.org/"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 
 DEPENDS="xorg-libX11 gtk+ slitaz-configs"
 BUILD_DEPENDS="xorg-dev gtk+-dev"
@@ -16,7 +17,6 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	cd $src
 	./configure \
 		--libexecdir=/usr/lib/lxdm \
 		--sysconfdir=/etc \
diff -r 70c7a787c969 -r c9e270dd464f lxinput/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxinput/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,7 @@
+LXInput is a GUI application for the Lightweight X11 Desktop Environment (LXDE).
+
+It configures keyboard and mouse settings:
+  * Delay and Interval for character repeat
+  * Enable/Disable beeps of keyboard input error
+  * Swap left and right mouse buttons
+  * Mouse acceleration and sensitivity
diff -r 70c7a787c969 -r c9e270dd464f lxinput/receipt
--- a/lxinput/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxinput/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxinput"
 VERSION="0.3.4"
 CATEGORY="x-window"
-SHORT_DESC="LXDE input manager (Keyboard and mouse settings)."
+SHORT_DESC="LXDE keyboard and mouse configuration"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL3"
 WEB_SITE="http://lxde.org"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE keyboard mouse"
 HOST_ARCH="i486 arm"
 
 DEPENDS="gtk+"
diff -r 70c7a787c969 -r c9e270dd464f lxlauncher/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxlauncher/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,8 @@
+LXLauncher is a GUI application for the Lightweight X11 Desktop Environment
+(LXDE).
+
+It is a Easy-Mode launcher for netbooks and subnotebooks like the EeePC.
+
+It's standard-compliant and desktop-independent. It follows freedesktop.org
+specs, so newly added applications will automatically show up in the launcher,
+and vice versa for the removed ones.
diff -r 70c7a787c969 -r c9e270dd464f lxlauncher/receipt
--- a/lxlauncher/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxlauncher/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxlauncher"
 VERSION="0.2.4"
 CATEGORY="x-window"
-SHORT_DESC="LXDE desktop launcher."
+SHORT_DESC="LXDE launcher for netbooks"
 LICENSE="GPL3"
 MAINTAINER="pankso@slitaz.org"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WEB_SITE="http://lxde.org/"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE netbook"
 
 DEPENDS="xorg-libX11 gtk+ gnome-menus startup-notification menu-cache xorg-libXdamage"
 BUILD_DEPENDS="xorg-libX11-dev gtk+-dev gnome-menus gnome-menus-dev \
diff -r 70c7a787c969 -r c9e270dd464f lxmenu-data/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxmenu-data/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,4 @@
+LXMenu-data is a component for the Lightweight X11 Desktop Environment (LXDE).
+
+It contains files required to build desktop menus for LXDE compling to the
+freedesktop.org menu specificiation.
diff -r 70c7a787c969 -r c9e270dd464f lxmenu-data/receipt
--- a/lxmenu-data/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxmenu-data/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,13 +3,14 @@
 PACKAGE="lxmenu-data"
 VERSION="0.1.4"
 CATEGORY="x-window"
-SHORT_DESC="Freedesktop.org menu-spec-compliant desktop menus for LXDE."
+SHORT_DESC="LXDE freedesktop.org menu specification"
 MAINTAINER="rcx@zoominternet.net"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WEB_SITE="http://www.lxde.org/"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
 CONFIG_FILES="/etc/xdg/menus/lxde-applications.menu"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 [ "$ARCH" == "i486" ] && BUILD_DEPENDS="gettext intltool"
diff -r 70c7a787c969 -r c9e270dd464f lxpanel-dev/receipt
--- a/lxpanel-dev/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxpanel-dev/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,10 +3,11 @@
 PACKAGE="lxpanel-dev"
 VERSION="0.6.2"
 CATEGORY="x-window"
-SHORT_DESC="Development files for LXpanel"
+SHORT_DESC="LXDE panel (development)"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://www.lxde.org/"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 WANTED="lxpanel"
diff -r 70c7a787c969 -r c9e270dd464f lxpanel-extra/receipt
--- a/lxpanel-extra/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxpanel-extra/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,10 +3,11 @@
 PACKAGE="lxpanel-extra"
 VERSION="0.6.2"
 CATEGORY="x-window"
-SHORT_DESC="Extra files and plugins for LXpanel"
+SHORT_DESC="LXDE panel (extra files and plugins)"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://www.lxde.org/"
+TAGS="LXDE"
 
 WANTED="lxpanel"
 DEPENDS="lxpanel libwnck"
diff -r 70c7a787c969 -r c9e270dd464f lxpanel/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxpanel/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,19 @@
+LXPanel is a GUI application for the Lightweight X11 Desktop Environment (LXDE).
+
+It is derived from fbpanel and includes the following features:
+  * User-friendly application menu automatically generated from .desktop files
+    on the system
+  * Launcher bar (small icons clicked to launch apps)
+  * Task bar supporting ICCCM/EWMH `urgency' hint (Pidgin IM windows can flash
+    on new incoming messages)
+  * Run dialog (type a command to run, without opening a terminal)
+  * Net status icon plug-in (optional).
+  * Volume control plug-in (optional).
+  * Notification area (system tray).
+  * Digital clock.
+  * Keyboard LEDs plug-in (display caps/num locks).
+  * lxpanelctl: control lxpanel from other programs.
+
+For example, "lxpanelctl run" will show the Run dialog in lxpanel, and
+"lxpanelctl menu" will show the application menu. This is useful in combination
+with window manager key bindings.
diff -r 70c7a787c969 -r c9e270dd464f lxpanel/receipt
--- a/lxpanel/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxpanel/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,14 +3,14 @@
 PACKAGE="lxpanel"
 VERSION="0.6.2"
 CATEGORY="x-window"
-SHORT_DESC="Lightweight X11 desktop panel"
+SHORT_DESC="LXDE panel"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://www.lxde.org/"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
-WGET_URL="$SF_MIRROR/lxde/LXPanel%20%28desktop%20panel%29/LXPanel%20$VERSION/$TARBALL"
+WGET_URL="$SF_MIRROR/lxde/$TARBALL"
 CONFIG_FILES="/etc/lxpanel/default"
-TAGS="gtk2 panel"
+TAGS="LXDE gtk2 panel"
 HOST_ARCH="i486 arm"
 
 SUGGESTED="lxde lxsession slitaz-icon"
diff -r 70c7a787c969 -r c9e270dd464f lxpolkit/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxpolkit/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,4 @@
+LXPolkit is a GUI application for the Lightweight X11 Desktop Environment
+(LXDE).
+
+It's a simple PolicyKit authentication agent.
diff -r 70c7a787c969 -r c9e270dd464f lxpolkit/receipt
--- a/lxpolkit/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxpolkit/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxpolkit"
 VERSION="0.1.0"
 CATEGORY="x-window"
-SHORT_DESC="LXDE PolKit manager."
+SHORT_DESC="LXDE PolicyKit authentication agent"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL3"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
 WGET_URL="$SF_MIRROR/lxde/LXPolkit/$TARBALL"
 WEB_SITE="http://lxde.org"
+TAGS="LXDE"
 
 DEPENDS="gtk+ polkit"
 BUILD_DEPENDS="gtk+-dev polkit-dev"
@@ -16,7 +17,6 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	cd $src
 	./configure \
 		--sysconfdir=/etc \
 		--libexecdir=/usr/lib/lxde \
diff -r 70c7a787c969 -r c9e270dd464f lxrandr/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxrandr/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,15 @@
+LXRandR is a GUI application for the Lightweight X11 Desktop Environment (LXDE).
+
+This is a very basic monitor config tool utilizing the X extension called RandR.
+It can let you change the screen resolution on the fly. Besides, when you run
+lxrandr with external monitor connected, its GUI will change, and show you some
+quick options to get your projector or external monitor working correctly.
+
+This tool doesn't aim to be a full randr frontend. It's a utility for grandma,
+not for geeks. If you need the full power of RandR, get xrandr (console) or
+grandr (GUI) and read some tutorials.
+
+LXRandR only gives you some easy and quick options which are intuitive. It's
+very suitable for laptop users who frequently uses projectors or external
+monitor and just want to get their work done without reading a lot of
+"geek-centered" manuals or command line tutorials.
diff -r 70c7a787c969 -r c9e270dd464f lxrandr/receipt
--- a/lxrandr/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxrandr/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxrandr"
 VERSION="0.3.0"
 CATEGORY="utilities"
-SHORT_DESC="LXDE screen manager."
+SHORT_DESC="LXDE monitor configuration tool"
 MAINTAINER="gokhlayeh@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WEB_SITE="http://lxde.org"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="gtk+ xorg-xrandr"
@@ -36,4 +37,3 @@
 	rm -rf $fs/usr/share/man
 	rm -rf $fs/usr/share/locale	
 }
-
diff -r 70c7a787c969 -r c9e270dd464f lxsession-edit/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxsession-edit/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,2 @@
+LXSession-Edit is a simple session editor GUI for lxsession-lite which follows
+autostart specs from FreeDesktop.Org.
diff -r 70c7a787c969 -r c9e270dd464f lxsession-edit/receipt
--- a/lxsession-edit/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxsession-edit/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxsession-edit"
 VERSION="0.2.0"
 CATEGORY="x-window"
-SHORT_DESC="LXDE X session manager editor."
+SHORT_DESC="Configure what application start up automatically in LXDE"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://wiki.lxde.org/en/LXSession_Edit"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
-WGET_URL="$SF_MIRROR/lxde/LXSession%20Edit/lxsession-edit%20$VERSION/$TARBALL"
+WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="gtk+ lxsession"
diff -r 70c7a787c969 -r c9e270dd464f lxsession/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxsession/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,18 @@
+LXSession is a lightweight X11 session manager with fewer dependencies, designed
+for use with the LXDE (Lightweight X11 Desktop Environment). It derived from XSM
+and have following differences:
+  * Removed the session dialog from xsm.
+  * Stripped down without session restore function.
+  * Automaticlly restart specific program if crashes happened.
+  * Use better configuration.
+  * Provide a nice logout-dialog with the ability to shutdown / reboot /
+    suspend / hibernate via HAL or gdm
+  * Support halt/reboot LTSP thin clients, and more...
+
+It's desktop-independent and can be used with any window manager.
+
+As "session manager" lxsession used to automatically start a set of applications
+and set up a working desktop environment
+
+LXSession has also a built-in lightweight Xsettings daemon, which can configure
+GTK+ themes, keyboard, and mouse for you on session startup.
diff -r 70c7a787c969 -r c9e270dd464f lxsession/receipt
--- a/lxsession/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxsession/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxsession"
 VERSION="0.5.2"
 CATEGORY="x-window"
-SHORT_DESC="LXDE X session manager."
+SHORT_DESC="Default session manager for LXDE"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://wiki.lxde.org/en/LXSession"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="gtk+ dbus"
diff -r 70c7a787c969 -r c9e270dd464f lxshortcut/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxshortcut/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,5 @@
+LXShortcut is a GUI application for the Lightweight X11 Desktop Environment
+(LXDE).
+
+It allows creating and editing application shortcuts compatible with the
+freedesktop.org Desktop Entry specification.
diff -r 70c7a787c969 -r c9e270dd464f lxshortcut/receipt
--- a/lxshortcut/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxshortcut/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxshortcut"
 VERSION="0.1.2"
 CATEGORY="x-window"
-SHORT_DESC="Edit application shortcuts compliant with the freedesktop.org Desktop Entry spec."
+SHORT_DESC="LXDE application shortcut editor"
 MAINTAINER="rcx@zoominternet.net"
 LICENSE="GPL3"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
 WEB_SITE="http://www.lxde.org/"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 
 DEPENDS="glib glibc-base libgio expat zlib \
 gtk+ atk cairo pango pixman libpng fontconfig freetype \
diff -r 70c7a787c969 -r c9e270dd464f lxtask/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxtask/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,3 @@
+LXTask is a GUI application for the Lightweight X11 Desktop Environment (LXDE).
+
+It allows monitoring and controlling of running processes.
diff -r 70c7a787c969 -r c9e270dd464f lxtask/receipt
--- a/lxtask/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxtask/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="lxtask"
 VERSION="0.1.6"
 CATEGORY="system-tools"
-SHORT_DESC="System task manager with a nice GTK interface."
+SHORT_DESC="LXDE task manager"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WEB_SITE="http://lxde.sourceforge.net/"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="gtk+ xorg-libXdamage"
diff -r 70c7a787c969 -r c9e270dd464f lxterminal-locales/receipt
--- a/lxterminal-locales/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxterminal-locales/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,16 +3,15 @@
 PACKAGE="lxterminal-locales"
 VERSION="0.2.0"
 CATEGORY="utilities"
-SHORT_DESC="LXDE X Terminal emulator locales."
+SHORT_DESC="LXDE terminal emulator locale files"
 MAINTAINER="gokhlayeh@slitaz.org"
 LICENSE="GPL2"
 WANTED="lxterminal"
 WEB_SITE="http://lxde.org"
+TAGS="LXDE locale"
 
 DEPENDS="lxterminal"
 
-# Rules to configure and make the package.
-
 # Rules to gen a SliTaz package suitable for Tazpkg.
 genpkg_rules()
 {
diff -r 70c7a787c969 -r c9e270dd464f lxterminal/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lxterminal/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,6 @@
+LXTerminal is a VTE-based terminal emulator for the Lightweight X11 Desktop
+Environment (LXDE).
+
+It supports multiple tabs and has only minimal dependencies thus being
+completely desktop-independent. In order to reduce memory usage and increase
+the performance, all instances of the terminal are sharing a single process.
diff -r 70c7a787c969 -r c9e270dd464f lxterminal/receipt
--- a/lxterminal/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/lxterminal/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,14 +3,14 @@
 PACKAGE="lxterminal"
 VERSION="0.2.0"
 CATEGORY="utilities"
-SHORT_DESC="LXDE X Terminal emulator."
+SHORT_DESC="LXDE terminal emulator"
 MAINTAINER="gokhlayeh@slitaz.org"
 LICENSE="GPL2"
 SUGGESTED="lxterminal-locales"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
 WEB_SITE="http://lxde.org"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
-TAGS="terminal"
+TAGS="LXDE terminal"
 
 DEPENDS="vte gtk+"
 BUILD_DEPENDS="intltool vte-dev vte-terminal gtk+-dev"
diff -r 70c7a787c969 -r c9e270dd464f lzma/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/lzma/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,9 @@
+The Lempel-Ziv Markov-chain Algorithm is a compression method based on the
+famous LZ77 algorithm, and was first introduced by 7-Zip for use in 7z archives.
+
+Its main characteristics are a very high compression ratio, with high RAM usage,
+and fast decompression, with low RAM usage. These properties make it well suited
+to embedded uses, such as for ROM (firmware) compression.
+
+This package provides the lzma command line utility, which has a familiar
+gzip-like interface.
diff -r 70c7a787c969 -r c9e270dd464f menu-cache-dev/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/menu-cache-dev/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,4 @@
+Libmenu-cache is a library creating and utilizing caches to speed up the access
+to freedesktop.org defined application menus.
+
+This package contains the development files.
diff -r 70c7a787c969 -r c9e270dd464f menu-cache-dev/receipt
--- a/menu-cache-dev/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/menu-cache-dev/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="menu-cache-dev"
 VERSION="1.0.0"
 CATEGORY="development"
-SHORT_DESC="Library used to read freedesktop.org menus (development)"
+SHORT_DESC="LXDE implementation of the freedesktop Menu's cache (development)"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://lxde.sourceforge.net/"
 WANTED="menu-cache"
 DEPENDS="menu-cache pkg-config"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 # Rules to gen a SliTaz package suitable for Tazpkg.
diff -r 70c7a787c969 -r c9e270dd464f menu-cache/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/menu-cache/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,10 @@
+Libmenu-cache is a library creating and utilizing caches to speed up the access
+to freedesktop.org defined application menus.
+
+It can be used as a replacement of libgnome-menu of gnome-menus:
+  * Shorten time for loading menu entries.
+  * Ease of use (API is very similar to that of libgnome-menu).
+  * Lightweight runtime library (parsing of the menu definition files are done
+    by menu-cache-gen when the menus are really changed).
+  * Less unnecessary and complicated file monitoring.
+  * Heavily reduced disk I/O.
diff -r 70c7a787c969 -r c9e270dd464f menu-cache/receipt
--- a/menu-cache/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/menu-cache/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="menu-cache"
 VERSION="1.0.0"
 CATEGORY="x-window"
-SHORT_DESC="Library used to read freedesktop.org menus"
+SHORT_DESC="LXDE implementation of the freedesktop Menu's cache"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="https://github.com/lxde/menu-cache"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WGET_URL="$SF_MIRROR/lxde/$TARBALL"
+TAGS="LXDE"
 HOST_ARCH="i486 arm"
 
 DEPENDS="glib glibc-base libffi libfm libgio pcre zlib" # slitaz-menus ?
diff -r 70c7a787c969 -r c9e270dd464f ntfs-3g/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ntfs-3g/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,2 @@
+NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
+filesystem used by Microsoft Windows.
diff -r 70c7a787c969 -r c9e270dd464f ntfs-3g/receipt
--- a/ntfs-3g/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/ntfs-3g/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="ntfs-3g"
 VERSION="2014.2.15"
 CATEGORY="system-tools"
-SHORT_DESC="The free ntfs driver."
+SHORT_DESC="Read/write NTFS driver for FUSE"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 SOURCE="ntfs-3g_ntfsprogs"
@@ -19,7 +19,6 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	cd $src
 	./configure --prefix=/usr \
 	--disable-static \
 	--with-fuse=internal \
@@ -41,7 +40,6 @@
 	#this link allow udisks2 to use ntfs-3g
 	cd $fs/sbin
 	ln -s mount.ntfs-3g mount.ntfs
-	
 }
 
 # Pre remove and post install commands for Tazpkg.
diff -r 70c7a787c969 -r c9e270dd464f openbox/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/openbox/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,22 @@
+Openbox works with your applications, and makes your desktop easier to manage.
+This is because the approach to its development was the opposite of what seems
+to be the general case for window managers. Openbox was written first to comply
+with standards and to work properly. Only when that was in place did the team
+turn to the visual interface.
+
+Openbox is fully functional as a stand-alone working environment, or can be used
+as a drop-in replacement for the default window manager in the GNOME or KDE
+desktop environments.
+
+Openbox 3 is a completely new breed of window manager. It is not based upon any
+existing code base, although the visual appearance has been based upon that of
+Blackbox. Openbox 2 was based on the Blackbox 0.65.0 codebase.
+
+Some of the things to look for in Openbox are:
+  * ICCCM and EWMH compliance!
+  * Very fast
+  * Chainable key bindings
+  * Customizable mouse actions
+  * Window resistance
+  * Multi-head Xinerama support!
+  * Pipe menus
diff -r 70c7a787c969 -r c9e270dd464f pango/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pango/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,11 @@
+Pango is a library for layout and rendering of text, with an emphasis on
+internationalization. Pango can be used anywhere that text layout is needed.
+However, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as
+a test platform. Pango forms the core of text and font handling for GTK+-2.0.
+
+Pango is designed to be modular; the core Pango layout can be used with four
+different font backends:
+  * Core X windowing system fonts
+  * Client-side fonts on X using the Xft library
+  * Direct rendering of scalable fonts using the FreeType library
+  * Native fonts on Microsoft backends
diff -r 70c7a787c969 -r c9e270dd464f pango/receipt
--- a/pango/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/pango/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="pango"
 VERSION="1.36.8"
 CATEGORY="x-window"
-SHORT_DESC="Library for layout and rendering of text."
+SHORT_DESC="Layout and rendering of internationalized text"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
@@ -41,19 +41,18 @@
 genpkg_rules()
 {
 	mkdir -p $fs/usr/bin $fs/usr/lib $fs/etc/pango
-    cp -a $install/usr/bin/* $fs/usr/bin
-    cp -a $install/usr/lib/*.so* $fs/usr/lib
-    cp -a $install/usr/lib/pango $fs/usr/lib
-    rm -rf $fs/usr/lib/pango/1.8.0/modules/*.la
-    [ -d "$install/etc" ] && cp -a $install/etc $fs
-    touch $fs/etc/pango/pango.modules
+	cp -a $install/usr/bin/* $fs/usr/bin
+	cp -a $install/usr/lib/*.so* $fs/usr/lib
+	cp -a $install/usr/lib/pango $fs/usr/lib
+	rm -rf $fs/usr/lib/pango/1.8.0/modules/*.la
+	[ -d "$install/etc" ] && cp -a $install/etc $fs
+	touch $fs/etc/pango/pango.modules
 }
 
 # Pre and post install commands for Tazpkg.
 post_install()
 {
-    echo "Processing post-install commands..."
-    # Rebuilds pango.modules when installed.
-    chroot $1/ /usr/bin/pango-querymodules > $1/etc/pango/pango.modules
+	echo "Processing post-install commands..."
+	# Rebuilds pango.modules when installed.
+	chroot $1/ /usr/bin/pango-querymodules > $1/etc/pango/pango.modules
 }
-
diff -r 70c7a787c969 -r c9e270dd464f pciutils/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pciutils/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,2 @@
+This package contains various utilities for inspecting and setting of devices
+connected to the PCI bus.
diff -r 70c7a787c969 -r c9e270dd464f pciutils/receipt
--- a/pciutils/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/pciutils/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="pciutils"
 VERSION="3.2.1"
 CATEGORY="system-tools"
-SHORT_DESC="Utilities to list PCI device by name (lspci)."
+SHORT_DESC="Linux PCI Utilities"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
@@ -16,7 +16,6 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	cd $src
 	make OPT="${CFLAGS} -fPIC -DPIC" SHARED=no PREFIX=/usr SHAREDIR=/usr/share/misc MANDIR=/usr/share/man all
 	cp -a lib/libpci.a $WOK/$PACKAGE/source
 	make clean
diff -r 70c7a787c969 -r c9e270dd464f pcmciautils/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pcmciautils/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,4 @@
+This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or later,
+replacing the old pcmcia-cs tools used with earlier kernel versions. PCMCIA
+cards are commonly used in laptops to provide expanded capabilities such as
+network connections, modems, increased memory, etc.
diff -r 70c7a787c969 -r c9e270dd464f pcmciautils/receipt
--- a/pcmciautils/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/pcmciautils/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="pcmciautils"
 VERSION="018"
 CATEGORY="system-tools"
-SHORT_DESC="Utils to use with PCMCIA cards"
+SHORT_DESC="Utilities for inserting and removing PCMCIA cards"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.bz2"
@@ -18,7 +18,6 @@
 compile_rules()
 {
 	# We need lex...
-	cd $src
 	make
 }
 
diff -r 70c7a787c969 -r c9e270dd464f pcre/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pcre/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,2 @@
+This is a library of functions to support regular expressions whose syntax and
+semantics are as close as possible to those of the Perl 5 language.
diff -r 70c7a787c969 -r c9e270dd464f pcre/receipt
--- a/pcre/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/pcre/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="pcre"
 VERSION="8.35"
 CATEGORY="system-tools"
-SHORT_DESC="Perl Compatible Regular Expressions."
+SHORT_DESC="Perl 5 Compatible Regular Expression Library"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="BSD"
 TARBALL="$PACKAGE-$VERSION.tar.bz2"
diff -r 70c7a787c969 -r c9e270dd464f pixman/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pixman/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,3 @@
+A library for manipulating pixel regions -- a set of Y-X banded rectangles,
+image compositing using the Porter/Duff model and implicit mask generation for
+geometric primitives including trapezoids, triangles, and rectangles.
diff -r 70c7a787c969 -r c9e270dd464f pixman/receipt
--- a/pixman/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/pixman/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="pixman"
 VERSION="0.32.6"
 CATEGORY="x-window"
-SHORT_DESC="Pixman library"
+SHORT_DESC="Pixel-manipulation library for X and Cairo"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="MIT"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
diff -r 70c7a787c969 -r c9e270dd464f popt/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/popt/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,6 @@
+Popt was heavily influenced by the getopt() and getopt_long() functions, but it
+allows more powerful argument expansion. It can parse arbitrary argv[] style
+arrays and automatically set variables based on command line arguments. It also
+allows command line arguments to be aliased via configuration files and includes
+utility functions for parsing arbitrary strings into argv[] arrays using
+shell-like rules.
diff -r 70c7a787c969 -r c9e270dd464f posixovl/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/posixovl/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,9 @@
+With posixovl it is possible to mount FAT, VFAT, NTFS file system so that it
+behaves like POSIX. File permissions, symbolic links etc. are supported
+transparently. An extra file stores the information and the file system itself
+stays unmodified. It is a modern equivalent of the UMSDOS file system.
+
+Typical use: Mount an USB FAT32 drive with posixovl and your files retain their
+permission settings.
+
+This package extends mount and provides option '-t posixovl'.
diff -r 70c7a787c969 -r c9e270dd464f posixovl/receipt
--- a/posixovl/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/posixovl/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,12 +3,13 @@
 PACKAGE="posixovl"
 VERSION="1.2"
 CATEGORY="system-tools"
-SHORT_DESC="A modern equivalent of the UMSDOS."
+SHORT_DESC="FUSE file system that provides POSIX functionality"
 MAINTAINER="pascal.bellard@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
 WEB_SITE="http://$PACKAGE.sourceforge.net/"
 WGET_URL="$SF_MIRROR/$PACKAGE/$TARBALL"
+TAGS="filesystem"
 
 DEPENDS="fuse attr"
 BUILD_DEPENDS="autoconf automake fuse-dev attr-dev"
@@ -16,7 +17,7 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	mv $PACKAGE $src 2> /dev/null
+	mv $PACKAGE $src 2>/dev/null
 	cd $src
 	grep -q 'else if (!S_ISREG' posixovl.c ||
 	sed -i 's/if (!S_ISREG/if (S_ISLNK(cb->ll.mode))\n\t\tcb->sb.st_size = strlen(cb->ll.target);\n\telse &/' posixovl.c
@@ -27,8 +28,8 @@
 	make
 }
 
-# Rules to gen a SliTaz package suitable for Tazpkg.   
-genpkg_rules()                                      
+# Rules to gen a SliTaz package suitable for Tazpkg.
+genpkg_rules()
 {
 	mkdir -p $fs/usr/sbin
 	cp $src/mount.posixovl $fs/usr/sbin 
diff -r 70c7a787c969 -r c9e270dd464f ppp/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ppp/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,6 @@
+The Point-to-Point Protocol provides a standard way to transmit datagrams over a
+serial link, as well as a standard way for the machines at either end of the
+link to negotiate various optional characteristics of the link.
+
+This package is most commonly used to manage a modem for dial-up or certain
+kinds of broadband connections.
diff -r 70c7a787c969 -r c9e270dd464f rp-pppoe/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/rp-pppoe/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,6 @@
+PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by many ADSL
+Internet Service Providers. Roaring Penguin has a free client for Linux systems
+to connect to PPPoE service providers.
+
+The client is a user-mode program and does not require any kernel modifications.
+It is fully compliant with RFC 2516, the official PPPoE specification.
diff -r 70c7a787c969 -r c9e270dd464f rp-pppoe/receipt
--- a/rp-pppoe/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/rp-pppoe/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,13 +3,13 @@
 PACKAGE="rp-pppoe"
 VERSION="3.10"
 CATEGORY="network"
-SHORT_DESC="Tools to configure a PPPOE network connection."
+SHORT_DESC="Roaring Penguin PPPoE client"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 TARBALL="$PACKAGE-$VERSION.tar.gz"
 WEB_SITE="http://www.roaringpenguin.com/products/pppoe"
 WGET_URL="http://www.roaringpenguin.com/files/download/$TARBALL"
-TAGS="network pppoe"
+TAGS="network PPPoE"
 HOST_ARCH="i486"
 
 BUILD_DEPENDS="ppp"
diff -r 70c7a787c969 -r c9e270dd464f slim/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/slim/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,3 @@
+SLiM aims to be light, simple and independent from the various desktop
+environments. Although completely configurable through themes and an option
+file. It is particularly suitable for machines that don't require remote logins.
diff -r 70c7a787c969 -r c9e270dd464f slim/receipt
--- a/slim/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/slim/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="slim"
 VERSION="1.3.5"
 CATEGORY="x-window"
-SHORT_DESC="Desktop-independent graphical login manager for X11."
+SHORT_DESC="Desktop-independent graphical login manager for X11"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="GPL2"
 WEB_SITE="http://slim.berlios.de/"
diff -r 70c7a787c969 -r c9e270dd464f xterm/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/xterm/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,8 @@
+xterm is a terminal emulator for the X Window System. It provides DEC VT102 and
+Tektronix 4014 compatible terminals for programs that cannot use the window
+system directly. This version implements ISO/ANSI colors and most of the control
+sequences used by DEC VT220 terminals.
+
+This package provides commands: xterm, which is the traditional terminal
+emulator; uxterm, which is a wrapper around xterm that is intelligent about
+locale settings (especially those which use the UTF-8 character encoding).
diff -r 70c7a787c969 -r c9e270dd464f xterm/receipt
--- a/xterm/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/xterm/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="xterm"
 VERSION="314"
 CATEGORY="utilities"
-SHORT_DESC="X Terminal emulator."
+SHORT_DESC="X terminal emulator"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="MIT"
 TARBALL="$PACKAGE-$VERSION.tgz"
diff -r 70c7a787c969 -r c9e270dd464f zlib/description.txt
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/zlib/description.txt	Thu Apr 23 16:47:39 2015 +0300
@@ -0,0 +1,2 @@
+zlib is a library implementing the deflate compression method found in gzip and
+PKZIP. This package includes the shared library.
diff -r 70c7a787c969 -r c9e270dd464f zlib/receipt
--- a/zlib/receipt	Thu Apr 23 15:42:00 2015 +0200
+++ b/zlib/receipt	Thu Apr 23 16:47:39 2015 +0300
@@ -3,7 +3,7 @@
 PACKAGE="zlib"
 VERSION="1.2.8"
 CATEGORY="base-system"
-SHORT_DESC="Compression library."
+SHORT_DESC="Compression library"
 MAINTAINER="pankso@slitaz.org"
 LICENSE="zlib/libpng"
 TARBALL="$PACKAGE-$VERSION.tar.xz"
@@ -17,7 +17,6 @@
 # Rules to configure and make the package.
 compile_rules()
 {
-	cd $src
 	case "$ARCH" in
 		i486)
 			# work around gcc bug; see https://bugs.archlinux.org/task/20647