wok-6.x rev 955
Add gPXE
author | Pascal Bellard <pascal.bellard@slitaz.org> |
---|---|
date | Fri Jun 27 20:38:59 2008 +0000 (2008-06-27) |
parents | 0ae8330553fc |
children | 7ce662304f43 |
files | gpxe/receipt gpxe/stuff/default_boot.u gpxe/stuff/prefix.u |
line diff
1.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 1.2 +++ b/gpxe/receipt Fri Jun 27 20:38:59 2008 +0000 1.3 @@ -0,0 +1,27 @@ 1.4 +# SliTaz package receipt. 1.5 + 1.6 +PACKAGE="gpxe" 1.7 +VERSION="0.9.3" 1.8 +CATEGORY="system-tools" 1.9 +SHORT_DESC="Ethernet bootloader." 1.10 +MAINTAINER="pascal.bellard@slitaz.org" 1.11 +TARBALL="$PACKAGE-$VERSION.tar.bz2" 1.12 +WEB_SITE="http://www.etherboot.org/" 1.13 +WGET_URL="http://kernel.org/pub/software/utils/boot/$PACKAGE/$TARBALL" 1.14 + 1.15 +# Rules to configure and make the package. 1.16 +compile_rules() 1.17 +{ 1.18 + cd $src/src 1.19 + for i in prefix.u default_boot.u; do 1.20 + patch -p2 < ../../stuff/$i || return 1 1.21 + done 1.22 + make bin/gpxe.lkrn bin/undionly.kpxe 1.23 +} 1.24 + 1.25 +# Rules to gen a SliTaz package suitable for Tazpkg. 1.26 +genpkg_rules() 1.27 +{ 1.28 + mkdir -p $fs/usr/share/boot 1.29 + cp $src/src/bin/gpxe.lkrn $fs/usr/share/boot/gpxe 1.30 +}
2.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 2.2 +++ b/gpxe/stuff/default_boot.u Fri Jun 27 20:38:59 2008 +0000 2.3 @@ -0,0 +1,12 @@ 2.4 +--- gpxe-0.9.3/src/usr/autoboot.c 2.5 ++++ gpxe-0.9.3/src/usr/autoboot.c 2.6 +@@ -150,2 +150,3 @@ 2.7 + find_global_dhcp_option ( DHCP_BOOTFILE_NAME ) ); 2.8 ++default_boot: 2.9 + if ( buf[0] ) { 2.10 +@@ -164,3 +165,4 @@ 2.11 + printf ( "No filename or root path specified\n" ); 2.12 +- return -ENOENT; 2.13 ++ strcpy ( buf, "http://boot.slitaz.org/gpxe" ); 2.14 ++ goto default_boot; 2.15 + }
3.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 3.2 +++ b/gpxe/stuff/prefix.u Fri Jun 27 20:38:59 2008 +0000 3.3 @@ -0,0 +1,393 @@ 3.4 +--- gpxe-0.9.3/src/arch/i386/prefix/lkrnprefix.S 3.5 ++++ gpxe-0.9.3/src/arch/i386/prefix/lkrnprefix.S 3.6 +@@ -50,40 +50,343 @@ 3.7 + .arch i386 3.8 + .org 0 3.9 + .section ".prefix", "ax", @progbits 3.10 +-/* 3.11 +- This is a minimal boot sector. If anyone tries to execute it (e.g., if 3.12 +- a .lilo file is dd'ed to a floppy), print an error message. 3.13 +-*/ 3.14 + 3.15 +-bootsector: 3.16 +- jmp $BOOTSEG, $1f /* reload cs:ip to match relocation addr */ 3.17 +-1: 3.18 +- movw $0x2000, %di /* 0x2000 is arbitrary value >= length 3.19 +- of bootsect + room for stack */ 3.20 ++ call here 3.21 ++here: 3.22 ++ pop %ax 3.23 ++ cmpw $0x103, %ax /* COM entry point is cs:0x100 */ 3.24 ++ jne bootsector 3.25 ++ 3.26 ++/* We need a real mode stack that won't be stomped on by Etherboot 3.27 ++ which starts at 0x20000. Choose something that's sufficiently high, 3.28 ++ but not in DOC territory. Note that we couldn't do this in a real 3.29 ++ .com program since stack variables are in the same segment as the 3.30 ++ code and data, but this isn't really a .com program, it just looks 3.31 ++ like one to make DOS load it into memory. It still has the 64kB 3.32 ++ limitation of .com files though. */ 3.33 ++#define STACK_SEG 0x7000 3.34 ++#define STACK_SIZE 0x4000 3.35 ++ /* Set up temporary stack */ 3.36 ++ movw $STACK_SEG, %ax 3.37 ++ movw %ax, %ss 3.38 ++ movw $STACK_SIZE, %sp 3.39 ++ 3.40 ++ /* Calculate segment address of image start */ 3.41 ++ pushw %cs 3.42 ++ popw %ax 3.43 ++ addw $(0x100/16), %ax 3.44 ++ jmp go_setup_code 3.45 ++ 3.46 ++bootsector: 3.47 ++ jmp $BOOTSEG, $go /* reload cs:ip to match relocation addr */ 3.48 ++go: 3.49 ++ movw $0x2000-12, %di /* 0x2000 is arbitrary value >= length */ 3.50 ++ /* of bootsect + room for stack + 12 for */ 3.51 ++ /* saved disk parm block */ 3.52 + 3.53 + movw $BOOTSEG, %ax 3.54 + movw %ax,%ds 3.55 + movw %ax,%es 3.56 +- 3.57 +- cli 3.58 +- movw %ax, %ss /* put stack at BOOTSEG:0x2000. */ 3.59 ++ movw %ax,%ss /* put stack at initial position */ 3.60 + movw %di,%sp 3.61 +- sti 3.62 + 3.63 +- movw $why_end-why, %cx 3.64 +- movw $why, %si 3.65 ++/* Many BIOS's default disk parameter tables will not recognize multi-sector 3.66 ++ * reads beyond the maximum sector number specified in the default diskette 3.67 ++ * parameter tables - this may mean 7 sectors in some cases. 3.68 ++ * 3.69 ++ * Since single sector reads are slow and out of the question, we must take care 3.70 ++ * of this by creating new parameter tables (for the first disk) in RAM. We 3.71 ++ * will set the maximum sector count to 36 - the most we will encounter on an 3.72 ++ * ED 2.88. High doesn't hurt. Low does. 3.73 ++ * 3.74 ++ * Segments are as follows: ds=es=ss=cs - BOOTSEG 3.75 ++ */ 3.76 + 3.77 +- movw $0x0007, %bx /* page 0, attribute 7 (normal) */ 3.78 +- movb $0x0e, %ah /* write char, tty mode */ 3.79 +-prloop: 3.80 ++ xorw %cx,%cx 3.81 ++ movw %cx,%es /* access segment 0 */ 3.82 ++ movw $0x78, %bx /* 0:bx is parameter table address */ 3.83 ++ pushw %ds /* save ds */ 3.84 ++/* 0:bx is parameter table address */ 3.85 ++ ldsw %es:(%bx),%si /* loads ds and si */ 3.86 ++ 3.87 ++ movw %ax,%es /* ax is BOOTSECT (loaded above) */ 3.88 ++ movb $6, %cl /* copy 12 bytes */ 3.89 ++ cld 3.90 ++ pushw %di /* keep a copy for later */ 3.91 ++ rep 3.92 ++ movsw /* ds:si is source, es:di is dest */ 3.93 ++ popw %di 3.94 ++ 3.95 ++ movb $36,%es:4(%di) 3.96 ++ 3.97 ++ movw %cx,%ds /* access segment 0 */ 3.98 ++ xchgw %di,(%bx) 3.99 ++ movw %es,%si 3.100 ++ xchgw %si,2(%bx) 3.101 ++ popw %ds /* restore ds */ 3.102 ++ movw %di, dpoff /* save old parameters */ 3.103 ++ movw %si, dpseg /* to restore just before finishing */ 3.104 ++ pushw %ds 3.105 ++ popw %es /* reload es */ 3.106 ++ 3.107 ++/* Note that es is already set up. Also cx is 0 from rep movsw above. */ 3.108 ++ 3.109 ++ xorb %ah,%ah /* reset FDC */ 3.110 ++ xorb %dl,%dl 3.111 ++ int $0x13 3.112 ++ 3.113 ++/* Get disk drive parameters, specifically number of sectors/track. 3.114 ++ * 3.115 ++ * It seems that there is no BIOS call to get the number of sectors. Guess 3.116 ++ * 36 sectors if sector 36 can be read, 18 sectors if sector 18 can be read, 3.117 ++ * 15 if sector 15 can be read. Otherwise guess 9. 3.118 ++ */ 3.119 ++ 3.120 ++ movw $disksizes, %si /* table of sizes to try */ 3.121 ++ 3.122 ++probe_loop: 3.123 + lodsb 3.124 ++ orb %al, %al 3.125 ++ je got_sectors /* if all else fails, try 9 */ 3.126 ++ cbtw /* extend to word */ 3.127 ++ movw %ax, sectors 3.128 ++ xchgw %cx,%ax /* cx = track and sector */ 3.129 ++ xorw %dx,%dx /* drive 0, head 0 */ 3.130 ++ movw $0x0200, %bx /* address after boot sector */ 3.131 ++ /* (512 bytes from origin, es = cs) */ 3.132 ++ movw $0x0201, %ax /* service 2, 1 sector */ 3.133 ++ int $0x13 3.134 ++ jc probe_loop /* try next value */ 3.135 ++ 3.136 ++got_sectors: 3.137 ++ movw $msg1end-msg1, %cx 3.138 ++ movw $msg1, %si 3.139 ++ call print_str 3.140 ++ 3.141 ++/* ok, we've written the Loading... message, now we want to load the system */ 3.142 ++ 3.143 ++ pushw %es /* = ds */ 3.144 ++ movw $SYSSEG, %ax 3.145 ++ movw %ax,%es /* segment of SYSSEG<<4 */ 3.146 ++ pushw %es 3.147 ++ call read_it 3.148 ++ 3.149 ++/* This turns off the floppy drive motor, so that we enter the kernel in a 3.150 ++ * known state, and don't have to worry about it later. 3.151 ++ */ 3.152 ++ movw $0x3f2, %dx 3.153 ++ xorb %al,%al 3.154 ++ outb %al,%dx 3.155 ++ 3.156 ++ call print_nl 3.157 ++ pop %es /* = SYSSEG */ 3.158 ++ pop %es /* balance push/pop es */ 3.159 ++sigok: 3.160 ++ 3.161 ++/* Restore original disk parameters */ 3.162 ++ movw $0x78, %bx 3.163 ++ movw dpoff, %di 3.164 ++ movw dpseg, %si 3.165 ++ xorw %ax,%ax 3.166 ++ movw %ax,%ds 3.167 ++ movw %di,(%bx) 3.168 ++ movw %si,2(%bx) 3.169 ++ 3.170 ++/* after that (everything loaded), we call to the .ROM file loaded. */ 3.171 ++ 3.172 ++ movw $SYSSEG, %ax 3.173 ++ jmp go_setup_code 3.174 ++ 3.175 ++/* This routine loads the system at address SYSSEG<<4, making sure no 64kB 3.176 ++ * boundaries are crossed. We try to load it as fast as possible, loading whole 3.177 ++ * tracks whenever we can. 3.178 ++ * 3.179 ++ * in: es - starting address segment (normally SYSSEG) 3.180 ++ */ 3.181 ++read_it: 3.182 ++ movw $0,sread /* read whole image incl boot sector */ 3.183 ++ movw %es,%ax 3.184 ++ testw $0x0fff, %ax 3.185 ++die: jne die /* es must be at 64kB boundary */ 3.186 ++ xorw %bx,%bx /* bx is starting address within segment */ 3.187 ++rp_read: 3.188 ++ movw %es,%ax 3.189 ++ movw %bx,%dx 3.190 ++ movb $4, %cl 3.191 ++ shrw %cl,%dx /* bx is always divisible by 16 */ 3.192 ++ addw %dx,%ax 3.193 ++.equ SYSSIZE, _load_size_pgh - 32 3.194 ++ cmpw $SYSSEG+SYSSIZE, %ax /* have we loaded all yet? */ 3.195 ++ jb ok1_read 3.196 ++ ret 3.197 ++ok1_read: 3.198 ++ movw sectors, %ax 3.199 ++ subw sread, %ax 3.200 ++ movw %ax,%cx 3.201 ++ shlw $9, %cx /* 80186 opcode */ 3.202 ++ addw %bx,%cx 3.203 ++ jnc ok2_read 3.204 ++ je ok2_read 3.205 ++ xorw %ax,%ax 3.206 ++ subw %bx,%ax 3.207 ++ shrw $9, %ax /* 80186 opcode */ 3.208 ++ok2_read: 3.209 ++ call read_track 3.210 ++ movw %ax,%cx 3.211 ++ addw sread, %ax 3.212 ++ cmpw sectors, %ax 3.213 ++ jne ok3_read 3.214 ++ movw $1, %ax 3.215 ++ subw head, %ax 3.216 ++ jne ok4_read 3.217 ++ incw track 3.218 ++ok4_read: 3.219 ++ movw %ax, head 3.220 ++ xorw %ax,%ax 3.221 ++ok3_read: 3.222 ++ movw %ax, sread 3.223 ++ shlw $9, %cx /* 80186 opcode */ 3.224 ++ addw %cx,%bx 3.225 ++ jnc rp_read 3.226 ++ movw %es,%ax 3.227 ++ addb $0x10, %ah 3.228 ++ movw %ax,%es 3.229 ++ xorw %bx,%bx 3.230 ++ jmp rp_read 3.231 ++ 3.232 ++read_track: 3.233 ++ pusha /* 80186 opcode */ 3.234 ++ pushw %ax 3.235 ++ pushw %bx 3.236 ++ pushw %bp /* just in case the BIOS is buggy */ 3.237 ++ movb $0x2e, %al /* 0x2e = . */ 3.238 ++ call print_char 3.239 ++ popw %bp 3.240 ++ popw %bx 3.241 ++ popw %ax 3.242 ++ 3.243 ++ movw sread, %cx 3.244 ++ incw %cx 3.245 ++ movb track, %ch 3.246 ++ movw $0x0100, %dx 3.247 ++ andb head, %dh 3.248 ++ movb $2, %ah 3.249 ++ 3.250 ++ pushw %dx /* save for error dump */ 3.251 ++ pushw %cx 3.252 ++ pushw %bx 3.253 ++ pushw %ax 3.254 ++ 3.255 ++ int $0x13 3.256 ++ jc bad_rt 3.257 ++ addw $8, %sp 3.258 ++ popa /* 80186 opcode */ 3.259 ++ ret 3.260 ++ 3.261 ++bad_rt: pushw %ax /* save error code */ 3.262 ++ call print_all /* ah = error, al = read */ 3.263 ++ 3.264 ++ xorb %ah,%ah 3.265 ++ xorb %dl,%dl 3.266 ++ int $0x13 3.267 ++ 3.268 ++ addw $10, %sp 3.269 ++ popa /* 80186 opcode */ 3.270 ++ jmp read_track 3.271 ++ 3.272 ++/* print_all is for debugging purposes. It will print out all of the registers. 3.273 ++ * The assumption is that this is called from a routine, with a stack frame like 3.274 ++ * dx 3.275 ++ * cx 3.276 ++ * bx 3.277 ++ * ax 3.278 ++ * error 3.279 ++ * ret <- sp 3.280 ++ */ 3.281 ++ 3.282 ++print_all: 3.283 ++ call print_nl /* nl for readability */ 3.284 ++ /* print_nl update ah and bx */ 3.285 ++ movw $5, %cx /* error code + 4 registers */ 3.286 ++ movw %sp,%bp 3.287 ++ 3.288 ++print_loop: 3.289 ++ pushw %cx /* save count left */ 3.290 ++ 3.291 ++ cmpb $5, %cl 3.292 ++ jae no_reg /* see if register name is needed */ 3.293 ++ 3.294 ++ movb $0x5+0x41-1, %al 3.295 ++ subb %cl,%al 3.296 ++ int $0x10 3.297 ++ 3.298 ++ movb $0x58, %al /* 'X' */ 3.299 + int $0x10 3.300 ++ 3.301 ++ movb $0x3A, %al /* ':' */ 3.302 ++ int $0x10 3.303 ++ 3.304 ++no_reg: 3.305 ++ addw $2, %bp /* next register */ 3.306 ++ call print_hex /* print it */ 3.307 ++ movb $0x20, %al /* print a space */ 3.308 ++ int $0x10 3.309 ++ popw %cx 3.310 ++ loop print_loop 3.311 ++ /* nl for readability */ 3.312 ++print_nl: 3.313 ++ movb $0xd, %al /* CR */ 3.314 ++ call print_char 3.315 ++ movb $0xa, %al /* LF */ 3.316 ++ jmp print_char 3.317 ++ 3.318 ++ 3.319 ++print_str: 3.320 ++prloop: 3.321 ++ lodsb 3.322 ++ call print_char 3.323 + loop prloop 3.324 +-freeze: jmp freeze 3.325 ++ ret 3.326 ++ 3.327 ++/* print_hex prints the word pointed to by ss:bp in hexadecimal. */ 3.328 ++ 3.329 ++print_hex: 3.330 ++ movw (%bp),%dx /* load word into dx */ 3.331 ++ movb $4, %cl 3.332 ++ call print_2digits 3.333 ++print_2digits: 3.334 ++ call print_digit 3.335 ++/* fall through */ 3.336 ++print_digit: 3.337 ++ rol %cl,%dx /* rotate to use lowest 4 bits */ 3.338 ++ movb $0x0f, %al /* mask for nybble */ 3.339 ++ andb %dl,%al 3.340 ++ addb $0x90, %al /* convert al to ascii hex */ 3.341 ++ daa /* (four instructions) */ 3.342 ++ adcb $0x40, %al 3.343 ++ daa 3.344 ++print_char: 3.345 ++ movb $0x0e, %ah /* write char, tty mode */ 3.346 ++ movw $0x0007, %bx /* page 0, attribute 7 (normal) */ 3.347 ++ int $0x10 3.348 ++ ret 3.349 ++ 3.350 ++sread: .word 0 /* sectors read of current track */ 3.351 ++head: .word 0 /* current head */ 3.352 ++track: .word 0 /* current track */ 3.353 ++ 3.354 ++sectors: 3.355 ++ .word 0 3.356 + 3.357 +-why: .ascii "This image cannot be loaded from a floppy disk.\r\n" 3.358 +-why_end: 3.359 ++dpseg: .word 0 3.360 ++dpoff: .word 0 3.361 + 3.362 ++disksizes: 3.363 ++ .byte 36,18,15,9,0 3.364 ++ 3.365 ++msg1: 3.366 ++ .ascii "Loading ROM image" 3.367 ++msg1end: 3.368 + 3.369 + .org 497 3.370 + setup_sects: 3.371 +@@ -123,14 +426,23 @@ 3.372 + executing the Etherboot image that's loaded at SYSSEG:0 and 3.373 + whose entry point is SYSSEG:0. 3.374 + */ 3.375 +-setup_code: 3.376 ++setup_code: 3.377 ++ movw $(SYSSEG-(PREFIXSIZE/16)), %ax 3.378 + /* Etherboot expects to be contiguous in memory once loaded. 3.379 + * LILO doesn't do this, but since we don't need any 3.380 + * information that's left in the prefix, it doesn't matter: 3.381 + * we just have to ensure that %cs:0000 is where the start of 3.382 + * the Etherboot image *would* be. 3.383 + */ 3.384 +- ljmp $(SYSSEG-(PREFIXSIZE/16)), $run_etherboot 3.385 ++go_setup_code: 3.386 ++ xorw %cx, %cx 3.387 ++ pushw %cx 3.388 ++ pushw %cx /* No parameters to preserve for exit path */ 3.389 ++ pushw %cx /* Use prefix exit path mechanism */ 3.390 ++ pushw %ax 3.391 ++ pushw $run_etherboot 3.392 ++ /* Calculated lcall to _start with %cs:0000 = image start */ 3.393 ++ lret 3.394 + 3.395 + 3.396 + .org PREFIXSIZE