wok-current view ipxe/receipt @ rev 23810
syslinux/iso2exe: use isoboot
| author | Pascal Bellard <pascal.bellard@slitaz.org> |
|---|---|
| date | Mon May 25 10:10:30 2020 +0000 (2020-05-25) |
| parents | b054d6cbf5b8 |
| children | 78bc4b109dd6 |
line source
1 # SliTaz package receipt.
3 PACKAGE="ipxe"
4 VERSION="1.20.1"
5 CATEGORY="system-tools"
6 SHORT_DESC="Open source network boot firmware."
7 MAINTAINER="pascal.bellard@slitaz.org"
8 LICENSE="GPL2"
9 WEB_SITE="https://ipxe.org/"
10 TARBALL="$PACKAGE-$VERSION.tar.gz"
11 WGET_URL="https://github.com/ipxe/ipxe/archive/v$VERSION.tar.gz"
13 DEPENDS=""
14 BUILD_DEPENDS="perl wget liblzma-dev syslinux"
16 # Rules to configure and make the package.
17 compile_rules()
18 {
19 cd $src/src
20 sed -i 's|SIZEOF_LOW_4GB / SIZEOF_2MB_PAGE|1 << (SIZEOF_LOW_4GB_LOG2 - SIZEOF_2MB_PAGE_LOG2)|' arch/x86/transitions/librm.S
21 sed -i 's/-llzma/& -lpthread/' Makefile.*
22 sed -i 's|//\(#define.*CONSOLE_FRAMEBUFFER\)|\1|' config/console.h
23 sed -i 's|//\(#define.*CONSOLE_SERIAL\)|\1|' config/console.h
24 sed -i -e 's|//\(#define.*IMAGE_PNG\)|\1|' \
25 -e 's|.*\(NET_PROTO_IPV6\)|#define \1|' \
26 -e 's|undef \(DOWNLOAD_PROTO_HTTPS\)|define \1|' \
27 -e 's|.*\(VLAN_CMD\)|#define \1|' \
28 -e 's|.*\(CERT_CMD\)|#define \1|' \
29 -e 's|//\(#define.*CONSOLE_CMD\)|\1|' \
30 -e 's|//\(#define.*REBOOT_CMD\)|\1|' config/general.h
31 sed -i "s|\(TAG_LINE \"\)|\1${VERSION#*-} -- |" config/branding.h
32 sed -i 's|//\(#define.*CPUID_SETTINGS\)|\1|' config/settings.h
33 pxelinux="$(ls $WOK/syslinux/source/*/core/pxelinux.0)"
34 make bin/undionly.kkkpxe EMBED=$stuff/ipxelinux.ipxe,$pxelinux &&
35 mv bin/undionly.kkkpxe bin/ipxelinux.0
36 make bin-i386-efi/snponly.efi EMBED=$stuff/ipxelinux.ipxe,$pxelinux &&
37 mv bin-i386-efi/snponly.efi bin-i386-efi/ipxelinux.efi
38 make bin/undionly.pxe bin/undionly.kpxe bin/undionly.kkpxe \
39 bin/undionly.kkkpxe bin/ipxe.pxe bin/ipxe.kpxe bin/ipxe.kkpxe \
40 bin/ipxe.kkkpxe bin/ipxe.nbi bin/ipxe.lkrn bin-i386-efi/ipxe.efi \
41 bin-i386-efi/snponly.efi bin/ipxe.exe EMBED=$stuff/ipxe.cmd
42 cp $stuff/bootloader.S .
43 cc -o bootloader.o -Wa,-a=bootloader.lst -c bootloader.S
44 objcopy -O binary bootloader.o bootloader.bin
45 size=$(stat -c %s bin/ipxe.lkrn)
46 while read ofs val ; do
47 printf '\\\\x%02X\\\\x%02X' $(($val & 255)) $(($val / 256)) | \
48 xargs echo -en|dd bs=1 conv=notrunc of=bootloader.bin seek=$ofs
49 done 2> /dev/null <<EOT
50 4 $((($size+511)/512))
51 14 $((($size+15)/16))
52 EOT
53 }
55 # Rules to gen a SliTaz package suitable for Tazpkg.
56 genpkg_rules()
57 {
58 mkdir -p $fs/boot $install/usr/share
59 cp -a $src/src/doc $install/usr/share
60 cp -a $src/src/bin/ipxe.lkrn $fs/boot/ipxe.exe
61 dd if=$src/src/bootloader.bin of=$fs/boot/ipxe.exe conv=notrunc
62 }
64 # Pre and post install commands for Tazpkg.
65 post_install()
66 {
67 [ -s $1/boot/isolinux/isolinux.cfg ] &&
68 ! grep -qs 'Web Boot' $1/boot/isolinux/isolinux.cfg &&
69 sed -i 's|i18n.cfg|&\n\
70 LABEL web zeb\
71 MENU LABEL Web Boot\
72 KERNEL /boot/ipxe.exe|' $1/boot/isolinux/isolinux.cfg
73 true
74 }