SliTaz Repositories

     1.1 --- a/runcom/description.txt	Sat Feb 18 08:42:44 2012 -0500
     1.2 +++ b/runcom/description.txt	Sat Feb 18 16:12:24 2012 +0100
     1.3 @@ -11,13 +11,13 @@
     1.4  
     1.5  A boot sector image is a 512 bytes file ending with the 0xAA and 0x55 bytes 
     1.6  with the .bin extension.
     1.7 -Bios disk (int 13H) are amulated (CHS or LBA) with image file :
     1.8 +Bios disk (int 13H) are emulated (CHS or LBA) with an image file :
     1.9  - hard disk are image ./hd0, ./hd1, ... for disk 0x80, 0x81...
    1.10  - floppy disk are image ./fd0, ./fd1 ... or /dev/fd0, /dev/fd1 if not found.
    1.11  You can test it with the file /usr/bin/debug.bin, with the command line :
    1.12  $ debug.bin
    1.13  
    1.14 -3- The boot sector debugger /usr/bin/debug.bin
    1.15 +3- The 512 bytes boot sector debugger /usr/bin/debug.bin
    1.16  
    1.17  Usage:
    1.18  
    1.19 @@ -31,7 +31,7 @@
    1.20  
    1.21  seqment and offset are hexadecimal values in 0..FFFF range
    1.22  address is linear hexadecimal value in 0..FFFFF range or seqment:offset
    1.23 -words are bytes in 00..FF range or words in 0000..FFFF range or double words
    1.24 +words are bytes in 0..FF range or words in 000..FFFF range or double words
    1.25  CX and DX are used by INT13H/AL=01 BIOS interrupt.
    1.26  
    1.27  Example:

     2.1 --- a/runcom/receipt	Sat Feb 18 08:42:44 2012 -0500
     2.2 +++ b/runcom/receipt	Sat Feb 18 16:12:24 2012 +0100
     2.3 @@ -37,16 +37,15 @@
     2.4  	proc="/proc/sys/fs/binfmt_misc"
     2.5  	bin=":BOOTBIN:E::bin::/usr/bin/runcom:"
     2.6  	com=":DOSCOM:E::com::/usr/bin/runcom:"
     2.7 -	rc="$1/etc/init.d/local.sh"
     2.8 -	grep -q "$com" $rc || cat >> $rc <<EOT
     2.9 +	cat > /tmp/runcom$$ <<EOT
    2.10  [ ! -e $proc/register ] && modprobe $fmt && mount -t $fmt $fmt $proc
    2.11  echo "$bin" >$proc/register
    2.12  echo "$com" >$proc/register
    2.13  EOT
    2.14 -	[ -n "$1" ] && return
    2.15 -	[ ! -e $proc/register ] && modprobe $fmt && mount -t $fmt $fmt $proc
    2.16 -	echo "$bin" >$proc/register
    2.17 -	echo "$com" >$proc/register
    2.18 +	rc="$1/etc/init.d/local.sh"
    2.19 +	grep -q "$com" $rc || cat /tmp/runcom$$ >> $rc
    2.20 +	[ -n "$1" ] || . /tmp/runcom$$
    2.21 +	rm -f /tmp/runcom$$
    2.22  }
    2.23  
    2.24  # Pre remove command for Tazpkg.

     3.1 --- a/runcom/stuff/Makefile	Sat Feb 18 08:42:44 2012 -0500
     3.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     3.3 @@ -1,20 +0,0 @@
     3.4 -CC=gcc -m32
     3.5 -CFLAGS= -O2 -Wall -fno-builtin -fno-stack-protector #-march=i386 
     3.6 -HOST_CFLAGS=-O2 -Wall
     3.7 -# modify to set the kernel path
     3.8 -KERNEL_PATH=../linux-2.6.20
     3.9 -
    3.10 -all: debug.bin debug8086.bin dbg8086.bin new.bin dbg.bin runcom
    3.11 -
    3.12 -%.bin: %.o
    3.13 -	objcopy -O binary $< $@
    3.14 -	chmod +x $@
    3.15 -
    3.16 -%.o: %.c
    3.17 -	$(CC) $(CFLAGS) -c -o $@ $<
    3.18 -
    3.19 -%.o: %.S
    3.20 -	$(CC) -D__ASSEMBLY__ -Wa,-acghlnm=$*.lst -c -o $@ $<
    3.21 -
    3.22 -clean:
    3.23 -	rm -f *.bin runcom *.o *~