SliTaz Repositories

     1.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.2 +++ b/fake-sane/stuff/fake:pixma:04A91709.log	Thu Jun 27 22:27:24 2019 +0200
     1.3 @@ -0,0 +1,73 @@
     1.4 +Usage: scanimage [OPTION]...
     1.5 +
     1.6 +Start image acquisition on a scanner device and write image data to
     1.7 +standard output.
     1.8 +
     1.9 +Parameters are separated by a blank from single-character options (e.g.
    1.10 +-d epson) and by a "=" from multi-character options (e.g. --device-name=epson).
    1.11 +-d, --device-name=DEVICE   use a given scanner device (e.g. hp:/dev/scanner)
    1.12 +    --format=pnm|tiff      file format of output file
    1.13 +-i, --icc-profile=PROFILE  include this ICC profile into TIFF file
    1.14 +-L, --list-devices         show available scanner devices
    1.15 +-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output
    1.16 +                           can be specified: %d (device name), %v (vendor),
    1.17 +                           %m (model), %t (type), %i (index number), and
    1.18 +                           %n (newline)
    1.19 +-b, --batch[=FORMAT]       working in batch mode, FORMAT is `out%d.pnm' or
    1.20 +                           `out%d.tif' by default depending on --format
    1.21 +    --batch-start=#        page number to start naming files with
    1.22 +    --batch-count=#        how many pages to scan in batch mode
    1.23 +    --batch-increment=#    increase page number in filename by #
    1.24 +    --batch-double         increment page number by two, same as
    1.25 +                           --batch-increment=2
    1.26 +    --batch-prompt         ask for pressing a key before scanning a page
    1.27 +    --accept-md5-only      only accept authorization requests using md5
    1.28 +-p, --progress             print progress messages
    1.29 +-n, --dont-scan            only set options, don't actually scan
    1.30 +-T, --test                 test backend thoroughly
    1.31 +-A, --all-options          list all available backend options
    1.32 +-h, --help                 display this help message and exit
    1.33 +-v, --verbose              give even more status messages
    1.34 +-B, --buffer-size=#        change input buffer size (in kB, default 32)
    1.35 +-V, --version              print version information
    1.36 +
    1.37 +Options specific to device `pixma':
    1.38 +  Scan mode:
    1.39 +    --resolution auto||75|150|300|600|1200dpi [75]
    1.40 +        Sets the resolution of the scanned image.
    1.41 +    --mode auto|Color|Gray [Color]
    1.42 +        Selects the scan mode (e.g., lineart, monochrome, or color).
    1.43 +    --source Flatbed [Flatbed]
    1.44 +        Selects the scan source (such as a document-feeder).
    1.45 +    --button-controlled[=(yes|no)] [no]
    1.46 +        When enabled, scan process will not start immediately. To proceed,
    1.47 +        press "SCAN" button (for MP150) or "COLOR" button (for other models).
    1.48 +        To cancel, press "GRAY" button.
    1.49 +  Gamma:
    1.50 +    --custom-gamma[=(auto|yes|no)] [yes]
    1.51 +        Determines whether a builtin or a custom gamma-table should be used.
    1.52 +    --gamma-table auto|0..255,...
    1.53 +        Gamma-correction table.  In color mode this option equally affects the
    1.54 +        red, green, and blue channels simultaneously (i.e., it is an intensity
    1.55 +        gamma table).
    1.56 +  Geometry:
    1.57 +    -l auto|0..216.069mm [0]
    1.58 +        Top-left x position of scan area.
    1.59 +    -t auto|0..297.011mm [0]
    1.60 +        Top-left y position of scan area.
    1.61 +    -x auto|0..216.069mm [216.069]
    1.62 +        Width of scan-area.
    1.63 +    -y auto|0..297.011mm [297.011]
    1.64 +        Height of scan-area.
    1.65 +  Buttons:
    1.66 +    --button-update
    1.67 +        Update button state
    1.68 +    --button-1 <int> [0]
    1.69 +        Button 1
    1.70 +    --button-2 <int> [0]
    1.71 +        Button 2
    1.72 +
    1.73 +Type ``scanimage --help -d DEVICE'' to get list of all options for DEVICE.
    1.74 +
    1.75 +List of available devices:
    1.76 +    pixma:04A91709

     2.1 --- a/fake-sane/stuff/sane-fake.log	Thu Jun 27 14:19:03 2019 +0200
     2.2 +++ b/fake-sane/stuff/sane-fake.log	Thu Jun 27 22:27:24 2019 +0200
     2.3 @@ -1,1 +1,1 @@
     2.4 -fake-sane/fake:brother:bus1;dev2,[fake] Brother MFC-8420|fake-sane/fake:hpoj:mlc:usb:psc_1200_series,[fake] Hewlett-Packard psc 1200 series|fake-sane/fake:hpaio::usb:PSC_1600_series:serial=MY5CJF3044L0,[fake] hp PSC_1600_series|fake-sane/fake:brother:bus1;dev2.patched,[fake+patched] Brother MFC-8420|fake-sane/fake:hpoj:mlc:usb:psc_1200_series.patched,[fake+patched] Hewlett-Packard psc 1200 series|
     2.5 +fake-sane/fake:brother:bus1;dev2,[fake] Brother MFC-8420|fake-sane/fake:hpoj:mlc:usb:psc_1200_series,[fake] Hewlett-Packard psc 1200 series|fake-sane/fake:hpaio::usb:PSC_1600_series:serial=MY5CJF3044L0,[fake] hp PSC_1600_series|fake-sane/fake:brother:bus1;dev2.patched,[fake+patched] Brother MFC-8420|fake-sane/fake:hpoj:mlc:usb:psc_1200_series.patched,[fake+patched] Hewlett-Packard psc 1200 series|fake-sane/fake:pixma:04A91709,[fake] PIXMA MP150|

     3.1 --- a/sane-backends/stuff/tazpanel/sane.cgi	Thu Jun 27 14:19:03 2019 +0200
     3.2 +++ b/sane-backends/stuff/tazpanel/sane.cgi	Thu Jun 27 22:27:24 2019 +0200
     3.3 @@ -286,7 +286,7 @@
     3.4  	if (match("-l-t-x-y", $1)) minmax()
     3.5  	if (match("--resolution--brightness--contrast--source--mode", $1)) enum()
     3.6  }
     3.7 -')"
     3.8 +' | sed 's/||/|/g')"
     3.9  fi
    3.10  output="$(n=$(echo "$params" | wc -l); echo "$params" | \
    3.11  while read name def min max ; do