wok-next rev 13713

syslinux/iso2exe: add loram support
author Pascal Bellard <pascal.bellard@slitaz.org>
date Tue Dec 18 16:09:07 2012 +0100 (2012-12-18)
parents 493d6ffb095b
children aec1594b57d7
files syslinux/stuff/iso2exe/bootiso.S syslinux/stuff/iso2exe/init syslinux/stuff/iso2exe/iso2exe.sh
line diff
     1.1 --- a/syslinux/stuff/iso2exe/bootiso.S	Tue Dec 18 02:59:46 2012 +0000
     1.2 +++ b/syslinux/stuff/iso2exe/bootiso.S	Tue Dec 18 16:09:07 2012 +0100
     1.3 @@ -39,10 +39,14 @@
     1.4  start:
     1.5  	incw	%bp
     1.6  	pushw	%dx			// restore SP
     1.7 +	pushw	$0
     1.8 +	popw	%ds
     1.9 +	movw	$0x7C00, %bx
    1.10 +	pushfw
    1.11 +	pushw	%ds
    1.12 +	pushw	%bx
    1.13  	pushaw
    1.14  	movw	%sp, %bp
    1.15 -	pushf
    1.16 -	pushw	%ds
    1.17  	pushw	%es
    1.18  	call	setreg
    1.19  	rep
    1.20 @@ -58,10 +62,8 @@
    1.21  	int	$0x13
    1.22  setreg:
    1.23  	cld
    1.24 -	xorw	%bx, %bx		// Clear C
    1.25 -	movw	%bx, %ds
    1.26 -	movw	%bx, %es
    1.27 -	movb	$0x7C, %bh
    1.28 +	pushw	%ds
    1.29 +	popw	%es
    1.30  	movw	%bx, %si
    1.31  	movw	$0x0600, %di
    1.32  	movw	$0x0100, %cx
    1.33 @@ -83,147 +85,144 @@
    1.34  	xchgw	%ax, %dx
    1.35  	jnz	dxloop
    1.36  fail:
    1.37 -	int	$0x19
    1.38 +	movw	$0x0600+noloader, %si
    1.39 +	call	putslp
    1.40 +stop:
    1.41 +	hlt
    1.42 +	jmp	stop
    1.43  dxfound:
    1.44  	movw	%dx, 10(%bp)
    1.45  	call	readsector2
    1.46  	lodsw
    1.47 -	decw	%ax
    1.48 +	shrw	$1, %ax
    1.49  	jz	fail			// read fail or not isohydrid
    1.50  	popw	%es
    1.51 -	popw	%ds
    1.52 -	popf
    1.53  	popa
    1.54 -	ljmp	$0, $0x7C00
    1.55 +	iret
    1.56  
    1.57 +	
    1.58  ////////////////////////////// DOS EXE code ///////////////////////////////////
    1.59  
    1.60 +help:
    1.61 +	.ascii	"SliTaz GNU/Linux"
    1.62 +	.byte	EXESTR(loader)
    1.63 +no386:
    1.64 +	.ascii	"No 386"		// No 386+
    1.65 +	.byte	EXESTR(plus)
    1.66 +ERRvcpi:
    1.67 +	.ascii	"No EMM386/VCPI 4"	// No EMM386/VCPI 4.0+
    1.68 +	.byte	EXESTR(dot0)
    1.69 +chkerr:
    1.70 +	.ascii	"Broken ISO image fil"	// Broken ISO image file.
    1.71 +	.byte	EXESTR(eeol)
    1.72 +vm86modemsg:
    1.73 +	.ascii	"vm86"			// vm86 mode.
    1.74 +	.byte	EXESTR(mode)
    1.75 +rmPaging:
    1.76 +	.ascii	"Invalid: paging + "	// Invalid: paging + real mode.
    1.77 +realmodemsg:
    1.78 +	.ascii	"real"			// real mode.
    1.79 +// -------------------------------------------------------------------
    1.80 +mode:
    1.81 +	.ascii	" mod"
    1.82 +eeol:
    1.83 +	.ascii  "e"
    1.84 +	.byte	EXESTR(eol)
    1.85 +noloader:
    1.86 +	.ascii	"No"
    1.87 +loader:
    1.88 +	.ascii	" boot loader"
    1.89  eol:
    1.90 -	.ascii	".\r\n$"
    1.91 -no386:
    1.92 -	.ascii	"No 386+$"
    1.93 +	.ascii	"."
    1.94 +eol2:
    1.95 +	.asciz	"\r\n"
    1.96  noDOS3:
    1.97 -	.ascii	"No DOS 3.0+$"
    1.98 -rmPaging:
    1.99 -	.ascii	"Broken paging$"
   1.100 -ERRvcpi:
   1.101 -	.ascii	"No EMM386/VCPI 4.0+$"
   1.102 -chkerr:
   1.103 -	.ascii	"Broken ISO file$"
   1.104 -realmodemsg:
   1.105 -	.ascii	"Real mode$"
   1.106 -vm86modemsg:
   1.107 -	.ascii	"VM86 mode$"
   1.108 -help:
   1.109 -	.ascii	"SliTaz GNU/Linux boot loader$"
   1.110 +	.ascii	"No DOS 3"		// No DOS 3.0+
   1.111 +dot0:
   1.112 +	.ascii	".0"
   1.113 +plus:
   1.114 +	.ascii	"+"
   1.115 +	.byte	EXESTR(eol2)
   1.116  
   1.117  fixseg:
   1.118  	cld
   1.119 -	movb	$EXESTR(help), %dl
   1.120  	movw	$0x100, %si
   1.121 -	cmpw	$0x3F2F, -126(%si)	# /? 
   1.122 +	movw	-127(%si), %ax
   1.123 +	cwd
   1.124 +	pushw	%dx			// dos exit
   1.125 +	cmpw	$0x2F20, %ax
   1.126 +	movb	$EXESTR(help), %al
   1.127  	je	abort
   1.128  	movw	(%si), %cx
   1.129  	jcxz	skip
   1.130 -	xorw	%dx, %dx
   1.131  	movw	$0x7FE0/2, %cx
   1.132  chklp:
   1.133  	lodsw
   1.134  	addw	%ax, %dx
   1.135  	loop	chklp
   1.136  	orw	%dx, %dx
   1.137 -	movb	$EXESTR(chkerr), %dl
   1.138 +	movb	$EXESTR(chkerr), %al
   1.139  	jne	abort
   1.140  skip:
   1.141 -	pushf
   1.142 -	popw	%ax
   1.143 -	movw	$0xF0F0, %dx
   1.144 -	orb	%ah, %dh
   1.145 -	andb	$0xF, %ah
   1.146 +	pushfw			// save flags
   1.147 +		// bits  15 14 13 12 11 10  9  8  7  6  5  4  3  2  1  0
   1.148 +		// flags  0 NT  IOPL OF DF IF TF SF ZF  0 AF  0 PF  1 CF
   1.149 +	movb	$0x70, %ah
   1.150  	pushw	%ax
   1.151 -	popf
   1.152 -	pushf
   1.153 -	popw	%ax
   1.154 -	andb	%dl, %ah
   1.155 -	cmp	%dl, %ah
   1.156 -	je	NotSupported	// 8086 family
   1.157 -	pushw	%dx
   1.158 -	popf
   1.159 -	pushf
   1.160 -	popw	%ax
   1.161 -	andb	%dl, %ah
   1.162 -	jnz	is386		// 80286 family
   1.163 +	popfw			// < 286 : flags[12..15] are forced 1
   1.164 +	pushfw			// = 286 : flags[12..15] are forced 0
   1.165 +	popw	%ax		// > 286 : only flags[15] is forced 0
   1.166 +	popfw			// restore flags
   1.167 +	addb	$0x10, %ah	// test F0 and 00 cases
   1.168 +	cmpb	$0x10, %ah
   1.169 +	ja	is386		// C=8086/80186, Z=80286
   1.170 +#if 0
   1.171 +	jz	is286
   1.172 +	xorw	%bx, %bx
   1.173 +	movb	(%bx), %dh
   1.174 +	decw	%bx
   1.175 +	xorw	%bx, (%bx)	// 80186 write bytes at FFFF and 10000
   1.176 +	movw	(%bx), %ax
   1.177 +	xorw	%bx, (%bx)	// 8086 write bytes at FFFF and 0000
   1.178 +	cmpw	%ah, %dh
   1.179 +	jnz	is186
   1.180 +#endif
   1.181  NotSupported:
   1.182 -	movb	$EXESTR(no386), %dl
   1.183 +	movb	$EXESTR(no386), %al
   1.184  abort:
   1.185  puts:
   1.186 -	movb	$1, %dh
   1.187 -	call	puts2
   1.188 -	movw	$EXEADRS(eol), %dx
   1.189 -puts2:
   1.190 -	movb	$9, %ah
   1.191 -	int	$0x21
   1.192 -	ret
   1.193 +	movb	$1, %ah
   1.194 +	xchgw	%ax, %si
   1.195 +putslp:
   1.196 +	lodsb
   1.197 +	orb	%al, %al
   1.198 +	jz	moveret
   1.199 +	js	puts
   1.200 +	movw	$7, %bx
   1.201 +	movb	$0xE, %ah
   1.202 +	int	$0x10
   1.203 +	jmp	putslp
   1.204  
   1.205  is386:
   1.206  	movl	%cr0, %eax
   1.207  	andb	$1, %al
   1.208  	jne	tstvcpi
   1.209 -	movb	$EXESTR(rmPaging), %dl
   1.210  	shll	$1, %eax
   1.211 -cabort:
   1.212 +	movb	$EXESTR(rmPaging), %al
   1.213  	jc	abort
   1.214 -	movb	$EXESTR(realmodemsg), %dl
   1.215 -	jmp	realmode
   1.216 -
   1.217 -tstvcpi:
   1.218 -	pushw	%ds
   1.219 -	movw	%cx, %ds		// %cx = 0
   1.220 -	movw	0x67*4+2, %ds
   1.221 -	std
   1.222 -	movw	$14, %si
   1.223 -	lodsl
   1.224 -	cmpl	$0x30585858, %eax	// 0XXX
   1.225 -	lodsl
   1.226 -	cld
   1.227 -	popw	%ds
   1.228 -NoVCPI:
   1.229 -	movb	$EXESTR(ERRvcpi), %dl
   1.230 -	jne	abort
   1.231 -	shll	$8, %eax
   1.232 -	cmpl	$0x4D4D4500, %eax	// [XQ]MME
   1.233 -	movw	$EXEADRS(CmdVCPI), %si
   1.234 -ChkVCPI:
   1.235 -	jne	NoVCPI
   1.236 -	lodsb
   1.237 -	shlw	$8, %ax
   1.238 -	je	VersionVCPI
   1.239 -	int	$0x67
   1.240 -	jmp	ChkVCPI
   1.241 -
   1.242 -CmdVCPI:
   1.243 -	.byte	0x40			// status
   1.244 -	.byte	0xDE			// vcpi present ?
   1.245 -	.byte	0x46			// version
   1.246 -	.byte	0
   1.247 -	
   1.248 -VersionVCPI:
   1.249 -	cmpb	$0x40, %al		// >= 4.0 ?
   1.250 -	jb	NoVCPI
   1.251 -	movb	$EXESTR(vm86modemsg), %dl
   1.252 +	movb	$EXESTR(realmodemsg), %al
   1.253  realmode:
   1.254  	call	puts
   1.255  	movb	$0x30, %ah
   1.256  	int	$0x21
   1.257  	cmpb	$3, %al
   1.258 -	movb	$EXESTR(noDOS3), %dl
   1.259 -	jb	cabort
   1.260 +	movb	$EXESTR(noDOS3), %al
   1.261 +	jb	abort
   1.262  	movw	EXEADRS(comstart), %ax			// .com address
   1.263  	movw	$moveend-move, %cx
   1.264  	movw	$EXEADRS(move), %si
   1.265  	movw	$0xC000, %di
   1.266  	jmp	move2
   1.267 -
   1.268  move:
   1.269  	movb	$0x80, %ch
   1.270  	xchgw	%ax, %si
   1.271 @@ -232,9 +231,49 @@
   1.272  	pushw	%di
   1.273  	rep
   1.274  	movsb
   1.275 +moveret:
   1.276  	ret
   1.277  moveend:
   1.278 -	
   1.279 +
   1.280 +VersionVCPI:
   1.281 +	cmpb	$0x40, %dl		// >= 4.0 ?
   1.282 +	jb	NoVCPI
   1.283 +	movb	$EXESTR(vm86modemsg), %al
   1.284 +	jmp	realmode
   1.285 +tstvcpi:
   1.286 +	pushw	%ds
   1.287 +	movw	%cx, %ds		// %cx = 0
   1.288 +	movw	0x67*4+2, %ds
   1.289 +	movw	$10, %si
   1.290 +	lodsw
   1.291 +	xorw	$0x4D45, %ax		// EM(MX) or EM(MQ)
   1.292 +	xchgw	%ax, %dx
   1.293 +	lodsw				// si += 2
   1.294 +	lodsw
   1.295 +	xorw	$0x5858, %ax		// XX
   1.296 +	orw	%ax, %dx
   1.297 +	lodsw
   1.298 +	popw	%ds
   1.299 +	xorw	$0x3058, %ax		// X0
   1.300 +	orw	%ax, %dx
   1.301 +	movw	$EXEADRS(CmdVCPI), %si
   1.302 +ChkVCPI:
   1.303 +NoVCPI:
   1.304 +	xchgw	%ax, %dx
   1.305 +	movb	$EXESTR(ERRvcpi), %al
   1.306 +	jne	abort
   1.307 +	lodsb
   1.308 +	shlw	$8, %ax
   1.309 +	je	VersionVCPI
   1.310 +	int	$0x67
   1.311 +	testb	%ah, %ah
   1.312 +	jmp	ChkVCPI
   1.313 +CmdVCPI:
   1.314 +	.byte	0x40			// status
   1.315 +	.byte	0xDE			// vcpi present ?
   1.316 +	.byte	0x46			// version
   1.317 +	.byte	0
   1.318 +
   1.319  	.org	440
   1.320  //////////////////////////// partition table //////////////////////////////////
   1.321  
     2.1 --- a/syslinux/stuff/iso2exe/init	Tue Dec 18 02:59:46 2012 +0000
     2.2 +++ b/syslinux/stuff/iso2exe/init	Tue Dec 18 16:09:07 2012 +0100
     2.3 @@ -4,7 +4,9 @@
     2.4  
     2.5  get()
     2.6  {
     2.7 -	od -j $1 -N ${3:-2} -t u${3:-2} -An $2
     2.8 +	od -j $1 -N ${3:-2} -t u${3:-2} -An $2 2> /dev/null ||
     2.9 +	dd if=$2 bs=1 skip=$1 count=${3:-2} 2> /dev/null | \
    2.10 +		hexdump -e "\"\" 1/${3:-2} \"%d\""
    2.11  }
    2.12  
    2.13  getarg()
    2.14 @@ -35,17 +37,15 @@
    2.15  
    2.16  getiso()
    2.17  {
    2.18 +	mkdir -p /media/cdrom
    2.19  	blkid | while read dev info ; do
    2.20 -		case "$info" in
    2.21 -		*dos*|*fat*|*ntfs*)
    2.22 -			mount ${dev%:} /mnt
    2.23 -			if checkmagic /mnt/$ISO; then
    2.24 -				mount -o loop,ro /mnt/$ISO /media/cdrom
    2.25 -				echo "Found $ISO on ${dev%:}"
    2.26 -				break
    2.27 -			fi
    2.28 -			umount /mnt ;;
    2.29 -		esac
    2.30 +		mount ${dev%:} /mnt
    2.31 +		if checkmagic /mnt/$ISO; then
    2.32 +			mount -o loop,ro /mnt/$ISO /media/cdrom
    2.33 +			echo "Found $ISO on ${dev%:}"
    2.34 +			break
    2.35 +		fi
    2.36 +		umount /mnt
    2.37  	done
    2.38  }
    2.39  
    2.40 @@ -75,7 +75,7 @@
    2.41  		 /dev/hd* /dev/sd* ; do
    2.42  		cp -a $i /tmp/fs$i
    2.43  	done
    2.44 -	for i in /bin/busybox /usr/sbin/mount.posixovl $(which blkid); do
    2.45 +	for i in /bin/busybox $(which mount.posixovl) $(which blkid); do
    2.46  		cp $(LD_TRACE_LOADED_OBJECTS=1 /lib/ld*.so $i | \
    2.47  		sed 's|.*=> \(.*/lib/l[^ ]*\).*|\1|;/^\//!d') /tmp/fs/lib
    2.48  		cp $i /tmp/fs/bin
    2.49 @@ -111,14 +111,33 @@
    2.50  	rm -rf /tmp/fs
    2.51  }
    2.52  
    2.53 +is_loram()
    2.54 +{
    2.55 +	[ -s /lib/squashfs.ko* ]
    2.56 +}
    2.57 +
    2.58  doinstall()
    2.59  {
    2.60  	mkdir /mnt/slitaz
    2.61  	mount.posixovl /mnt/slitaz || return
    2.62  	mkdir -p /mnt/slitaz/boot /mnt/slitaz/mnt/dos
    2.63 -	for i in $(ls -r /media/cdrom/boot/rootfs*); do
    2.64 -		uncpio $i /mnt/slitaz
    2.65 -	done
    2.66 +	if [ -d /media/cdrom/fs ]; then
    2.67 +		cp -a /media/cdrom/fs/. /mnt/slitaz
    2.68 +	elif is_loram ; then
    2.69 +		for i in /media/cdrom/boot/rootfs?.* ; do
    2.70 +			[ -s $(basename $i) ] && continue
    2.71 +			cpio -i $i
    2.72 +		done
    2.73 +		for i in $(ls -r /media/cdrom/boot/rootfs*); do
    2.74 +			mount -o loop,ro $i /sqfs/mnt
    2.75 +			cp -a /sqfs/mnt/. /mnt/slitaz
    2.76 +			umount -d /sqfs/mnt
    2.77 +		done
    2.78 +	else
    2.79 +		for i in $(ls -r /media/cdrom/boot/rootfs*); do
    2.80 +			uncpio $i /mnt/slitaz
    2.81 +		done
    2.82 +	fi
    2.83  	for i in /media/cdrom/boot/bzImage /media/cdrom/boot/*pxe* \
    2.84  		/media/cdrom/boot/isolinux/he* /media/cdrom/boot/isolinux/opt* \
    2.85  		/media/cdrom/README /media/cdrom/boot/memtest* ; do
    2.86 @@ -135,7 +154,7 @@
    2.87  	unix2dos /mnt/slitaz/boot/he* /mnt/slitaz/boot/opt* \
    2.88  		/mnt/slitaz/boot/README /mnt/slitaz/boot/tazboot.cmd
    2.89  	[ -x /mnt/slitaz/usr/sbin/mount.posixovl ] ||
    2.90 -	cp /usr/sbin/mount.posixovl /mnt/slitaz/usr/sbin
    2.91 +	cp $(which mount.posixovl) /mnt/slitaz/usr/sbin
    2.92  	! grep -qs tazboot /mnt/boot.ini && cat >> /mnt/boot.ini <<EOT
    2.93  C:\\slitaz\\boot\\tazboot.exe="SliTaz"
    2.94  EOT
    2.95 @@ -160,7 +179,7 @@
    2.96  To do a traditional installation with disk partitioning,
    2.97  start SliTaz Live with 'SliTaz RAM boot' menu.\n
    2.98  " 16 70
    2.99 -	[ $? -eq 0 -a -x /usr/sbin/mount.posixovl ] || return
   2.100 +	[ $? -eq 0 -a -n "$(which mount.posixovl)" ] || return
   2.101  	doinstall
   2.102  	umount /proc
   2.103  	exec chroot /mnt/slitaz /sbin/init
   2.104 @@ -191,7 +210,8 @@
   2.105  
   2.106  md5()
   2.107  {
   2.108 -	( cd /media/cdrom ; md5sum -c md5sum ) | tee /tmp/data
   2.109 +	echo "Checking files..."
   2.110 +	( cd /media/cdrom ; md5sum -c md5sum ) > /tmp/data
   2.111  	$DIALOG --clear \
   2.112  		--title " Checked files " \
   2.113  		--textbox /tmp/data 24 78
   2.114 @@ -325,8 +345,34 @@
   2.115  	tazusb gen-iso2usb /mnt/$ISO $device
   2.116  }
   2.117  
   2.118 +mount_loram()
   2.119 +{
   2.120 +	is_loram || return
   2.121 +	insmod /lib/squashfs.ko* 2> /dev/null
   2.122 +	if [ -d /media/cdrom/fs ]; then
   2.123 +		ln -s /media/cdrom/fs /sqfs
   2.124 +	else
   2.125 +		mkdir /sqfs
   2.126 +		mount -o loop,ro -t squashfs /rootfs*.gz /sqfs
   2.127 +	fi
   2.128 +	ln -s /sqfs/lib/* lib
   2.129 +	ln -s /sqfs/usr /sqfs/var /
   2.130 +	for i in dmesg basename tr od reboot poweroff getty sync ; do
   2.131 +		ln -s /sqfs/bin/busybox /bin/$i
   2.132 +	done
   2.133 +}
   2.134 +
   2.135 +umount_loram()
   2.136 +{
   2.137 +	is_loram || return
   2.138 +	rm  /var /usr
   2.139 +	umount -d /sqfs
   2.140 +	rmdir /sqfs
   2.141 +}
   2.142 +
   2.143  text()
   2.144  {
   2.145 +	umount_loram
   2.146  	umount -d /media/cdrom
   2.147  	umount /mnt
   2.148  	umount /proc
   2.149 @@ -342,36 +388,38 @@
   2.150  	text
   2.151  }
   2.152  
   2.153 -reboot()
   2.154 +restart()
   2.155  {
   2.156 -	umount -d /media/cdrom
   2.157 -	umount /mnt
   2.158 -	/sbin/reboot -f
   2.159 +	sync
   2.160 +	[ ! -L /sqfs ] && umount -d /media/cdrom && umount /mnt
   2.161 +	reboot -f
   2.162  }
   2.163  
   2.164 -poweroff()
   2.165 +stop()
   2.166  {
   2.167 -	umount -d /media/cdrom
   2.168 -	umount /mnt
   2.169 -	/sbin/poweroff -f
   2.170 +	sync
   2.171 +	[ ! -L /sqfs ] && umount -d /media/cdrom && umount /mnt
   2.172 +	poweroff -f
   2.173  }
   2.174  
   2.175  shell()
   2.176  {
   2.177 -	/sbin/getty -n -l /bin/ash 38400 tty1
   2.178 +	getty -n -l /bin/ash 38400 tty1 || sh
   2.179  }
   2.180  
   2.181  [ -x /usr/sbin/mount.posixovl ] ||
   2.182 -mv /usr/sbin/mount.posixovl.iso2exe /usr/sbin/mount.posixovl
   2.183 +mv /bin/mount.posixovl.iso2exe /usr/sbin/mount.posixovl 2> /dev/null ||
   2.184 +mv /bin/mount.posixovl.iso2exe /bin/mount.posixovl
   2.185  mount -t proc /proc /proc
   2.186 -dmesg > /tmp/dmesg
   2.187  ISO="$(getarg iso | sed 's/.://;s|\\|/|g')"
   2.188  getiso
   2.189 +mount_loram
   2.190  case "$(basename $ISO | tr [A-Z] [a-z])$(getarg mode)" in
   2.191  *install*)	install ;;
   2.192  *live*)		live ;;
   2.193  *text*)		text ;;
   2.194  esac
   2.195 +dmesg > /tmp/dmesg
   2.196  
   2.197  while true; do
   2.198  	exec 3>&1
   2.199 @@ -389,8 +437,8 @@
   2.200  $(cdfile boot/memtest	"fdmemtest"	"Create a Memtest86 boot floppy") \
   2.201  $(cdfile Xboot/gpxe	"gpxe"		"Get SliTaz Web boot utility") \
   2.202  $(cdfile boot/gpxe	"fdgpxe"	"Create a SliTaz Web boot floppy") \
   2.203 -			"reboot"	"Restart the computer" \
   2.204 -			"poweroff"	"Power off" \
   2.205 +			"restart"	"Restart the computer" \
   2.206 +			"stop"		"Power off" \
   2.207  			"bootlog"	"Linux boot messages" \
   2.208  			"shell"		"Shell prompt" \
   2.209  	2>&1 1>&3`
     3.1 --- a/syslinux/stuff/iso2exe/iso2exe.sh	Tue Dec 18 02:59:46 2012 +0000
     3.2 +++ b/syslinux/stuff/iso2exe/iso2exe.sh	Tue Dec 18 16:09:07 2012 +0100
     3.3 @@ -50,11 +50,12 @@
     3.4  
     3.5  	# keep the largest room for the tazlito info file
     3.6  	TMP=/tmp/iso2exe$$
     3.7 -	mkdir -p $TMP/usr/sbin
     3.8 -	cp /usr/sbin/mount.posixovl $TMP/usr/sbin/mount.posixovl.iso2exe
     3.9 +	mkdir -p $TMP/bin $TMP/dev
    3.10 +	cp /usr/sbin/mount.posixovl $TMP/bin/mount.posixovl.iso2exe
    3.11 +	cp -a /dev/?d?* $TMP/dev
    3.12  	$0 --get init > $TMP/init.exe
    3.13 -	chmod +x $TMP/init.exe $TMP/usr/sbin/mount.posixov*
    3.14 -	( cd $TMP ; ls init.exe usr/sbin/mount.posixov* | cpio -o -H newc ) | \
    3.15 +	chmod +x $TMP/init.exe $TMP/bin/mount.posixov*
    3.16 +	( cd $TMP ; find * | cpio -o -H newc ) | \
    3.17  		lzma e $TMP/rootfs.gz -si 2> /dev/null
    3.18  	SIZE=$(wc -c < $TMP/rootfs.gz)
    3.19  	store 28 $SIZE $1