wok view syslinux/stuff/iso2exe/taziso @ rev 18670
taziso, iso2exe.sh: add custom config support ; awstat-hotspot, awesome, avant-window-navigator: update pre/post_install
| author | Pascal Bellard <pascal.bellard@slitaz.org> |
|---|---|
| date | Fri Dec 04 21:23:22 2015 +0100 (2015-12-04) |
| parents | 8031c3523ad8 |
| children | 28bf6d31c5b9 |
line source
1 #!/bin/sh
3 [ $(id -u) -eq 0 ] || exec su -c "$0 $@"
5 DIALOG=dialog
7 ddq()
8 {
9 dd $@ 2> /dev/null
10 }
12 get()
13 {
14 od -v -j $1 -N ${4:-${3:-2}} -t u${3:-2} -w${3:-2} -An "$2" 2>/dev/null ||
15 hexdump -v -s $1 -n ${4:-${3:-2}} -e "\"\" 1/${3:-2} \" %d\n\"" "$2"
16 }
18 bytes2bin()
19 {
20 for i in $@ ; do
21 printf '\\\\x%02X' $(($i&255))
22 done | xargs echo -en
23 }
25 words2bin()
26 {
27 for i in $@ ; do
28 printf '\\\\x%02X\\\\x%02X' $(($i&255)) $((($i>>8)&255))
29 done | xargs echo -en
30 }
32 gettazboot()
33 {
34 echo "Creating $(basename $1) ..."
35 O=$(($(get 64 "$ISO") - 0xC0))
36 L=$(($(get 20 "$ISO") - 0xC0 - $(get 24 "$ISO") - $O))
37 S=$((32+$L))
38 P=$((($S+511)/512))
39 E=$((4096-(32*$P)))
40 words2bin 0x5A4D $(($S%512)) $P 0 2 $E -1 $((${2:-0}-16)) \
41 -2 0 256 -16 28 0x6C53 0x5469 0x7A61 > $1
42 ddq bs=1 count=$L skip=$(echo $O) if="$ISO" >> $1
43 }
45 uncpio()
46 {
47 [ -s "$1" ] || return
48 echo -en "\n Extracting $(basename $1) ..."
49 case $(get 0 $1) in
50 *35615) ( zcat || gunzip ) ;;
51 *14333) unxz ;;
52 *\ 93) unlzma ;;
53 *) cat ;;
54 esac < $1 | ( cd ${2:-/} ; cpio -idmu > /dev/null 2>&1 )
55 }
57 dotwait()
58 {
59 echo -n "${1:-Install filesystem}.."
60 touch /tmp/wait
61 [ "$REQUEST_URI" ] && return
62 while [ -e /tmp/wait ]; do
63 echo -n "." > /dev/tty
64 sleep 1
65 done &
66 }
68 getuuid()
69 {
70 dev=$(mount | sed "/ $(echo $mnt | sed 's|/|\\/|g') /!d;s/ .*//;s|/dev/||;q")
71 [ "$dev" ] &&
72 blkid | sed "/$dev:/!d;s/.* UUID=.\\([^ ]*\\)\".*/\\1/" ||
73 echo "/dev/hda1"
74 }
76 tazusbinitfs()
77 {
78 PAD=$(($(stat -c %s $1) % 4))
79 [ $PAD -ne 0 ] && ddq if=/dev/zero bs=1 count=$((4 - $PAD)) >> $1
80 mkdir -p /tmp/fs$$/etc /tmp/fs$$/lib /tmp/fs$$/home
81 cp -a /etc/locale.conf /tmp/fs$$/etc 2> /dev/null
82 cp -a /etc/keymap.conf /tmp/fs$$/etc 2> /dev/null
83 cat > /tmp/fs$$/init1 <<EOT
84 #!/bin/sh
85 sed -i 's|sbin/init|init2|' /init
86 exec /init
87 EOT
88 cat > /tmp/fs$$/init2 <<EOT
89 #!/bin/sh
91 mount -t proc /proc /proc
92 for i in /lib/*.ko* ; do insmod \$i 2> /dev/null ; done; sleep 2
93 v=\$(sed '/\\/home=/!d;s|.*/home=\\([^ ]*\\).*|\\1|' /proc/cmdline /cmdline 2> /dev/null)
94 mount / -o remount,rw
95 mkdir /mnt/dos
96 rm -f /cmdline 2> /dev/null
97 mount / -o remount,ro
98 mnt=/mnt/dos/\${v#*/}
99 dev=\$( (blkid /dev/[sh]d* || blkid) | grep \${v%%/*} | sed 's/:.*//;q')
100 echo "Mount \$dev in /mnt/dos for \$v..." | tee -a /run/boot.log
101 mount \$dev /mnt/dos
102 if [ ! -d /mnt/dos/slitaz ]; then
103 umount /mnt/dos 2> /dev/null
104 (blkid /dev/[sh]d* || blkid) | while read dev line; do
105 case "\$line" in
106 *ntfs*|*vfat*|*msdos*) ;;
107 *) continue ;;
108 esac
109 mount \${dev%:} /mnt/dos
110 [ -d /mnt/dos/slitaz ] && break
111 umount /mnt/dos
112 done
113 fi
114 $([ "$2" ] || echo '# ')mount.posixovl -F \$mnt -- -oallow_other -odefault_permissions -osuid
115 mount --bind \$mnt /home
116 umount /proc
117 exec /sbin/init
118 EOT
119 chmod 755 /tmp/fs$$/init?
120 ( cd /tmp/fs$$ ; find * | cpio -o -H newc ) | gzip -9 >> $1
121 rm -rf /tmp/fs$$
122 }
124 mkinitrd()
125 {
126 echo -en "\nCreating $(basename $1) "
127 fs=/tmp/fs$$
128 for i in bin lib dev proc tmp mnt etc ; do
129 mkdir -p $fs/$i
130 done
131 for i in /dev/console /dev/null /dev/tty /dev/tty0 /dev/tty1 /dev/tty2 \
132 /dev/fuse /dev/hd* /dev/sd* ; do
133 cp -a $2$i $fs/dev/
134 done
135 for i in /bin/busybox $(which mount.posixovl) $(which blkid); do
136 cp $(LD_TRACE_LOADED_OBJECTS=1 /lib/ld*.so $i | \
137 sed 's|.*=> \(.*/lib/l[^ ]*\).*|\1|;/^\//!d') $fs/lib
138 cp $i $fs/bin
139 done
140 cp -a /lib/ld-* $fs/lib
141 for i in $(busybox | sed '/Current/,$!d'); do
142 [ -e $fs/bin/${i%,} ] || ln -s busybox $fs/bin/${i%,}
143 done
144 ln -s /proc/mounts $fs/etc/mtab
145 sed 's/ .*//' /proc/modules | while read mod ; do
146 find /lib/modules/ | grep $mod.ko | \
147 sed 's|.*|cp & $fs/lib|' | sh
148 done
149 cat > $fs/init <<EOT
150 #!/bin/sh
152 arg()
153 {
154 grep -q \$1 /proc/cmdline &&
155 val="\$(sed "s/.*\$1=\\([^ ]*\\).*/\\1/" < /proc/cmdline)" &&
156 echo "\$2 \$val"
157 }
159 mount -t proc /proc /proc
160 arg debug "shell" && debug=true && set -x
161 for i in /lib/*.ko* ; do insmod \$i 2> /dev/null ; done; sleep 2
162 arg mount "Mount device"
163 mount \$( (blkid /dev/[sh]d* || blkid) | grep \$val | sed 's/:.*//;q') /mnt
164 arg subroot "Change root to directory"
165 if [ -d /mnt/\$val ]; then
166 umount /mnt 2> /dev/null
167 (blkid /dev/[sh]d* || blkid) | while read dev line; do
168 case "\$line" in
169 *ntfs*|*vfat*|*msdos*) ;;
170 *) continue ;;
171 esac
172 mount \${dev%:} /mnt
173 [ -d /mnt/\$val ] && break
174 umount /mnt
175 done
176 fi
177 $([ "$3" ] || echo '# ')mount.posixovl -F /mnt/\$val -- -oallow_other -odefault_permissions -osuid
178 mount --bind /mnt /mnt/\$val/mnt/dos
179 mount -o size=0 -t tmpfs tmpfs /mnt/\$val/mnt/dos/\$val
180 LDSO=\$(ls /mnt/\$val/lib/ld-* | sed q)
181 export LD_LIBRARY_PATH=\$val/lib:\$val/usr/lib:/lib
182 [ "$debug" = "true" ] && sh
183 umount /proc
184 exec /bin/switch_root /mnt \${LDSO#/mnt/} \$val/usr/sbin/chroot \$val /sbin/init
185 EOT
186 chmod +x $fs/init
187 ( cd $fs ; find * | cpio -o -H newc ) | lzma e $1 -si 2> /dev/null
188 rm -rf $fs /tmp/wait
189 }
191 ls_r()
192 {
193 ls -r $@ 2> /dev/null || ls $@
194 }
196 doinstall()
197 {
198 unset useposixovl
199 blkid | grep $(df $mnt | sed '$!d;s/ .*/:/') | \
200 grep -qiE "(msdos|vfat|ntfs)" && useposixovl=YES
202 mkdir -p $mnt/slitaz/boot $mnt/slitaz/mnt/dos
203 [ "$useposixovl" ] &&
204 if ! mount.posixovl -F $mnt/slitaz -- \
205 -oallow_other -odefault_permissions -osuid; then
206 echo "Can't install SliTaz. Abort."
207 sleep 5
208 return 1
209 fi
210 dotwait "Install root filesystem in /slitaz.."
211 if [ "$1" ]; then
212 ls_r $media/boot/rootfs*gz | \
213 xargs cat > $mnt/slitaz/boot/rootfs.gz
214 tazusbinitfs $mnt/slitaz/boot/rootfs.gz $useposixovl
215 initrd=rootfs.gz
216 extraargs="/home=$(getuuid)/slitaz rdinit=/init1"
217 else
218 for i in $(ls_r $media/boot/rootfs*gz); do
219 uncpio $i $mnt/slitaz
220 done
221 for i in $packages_list; do
222 tazpkg get-install $i --root=$mnt/slitaz
223 done
224 for i in $packages_dir/*.tazpkg; do
225 [ -s "$i" ] &&
226 tazpkg install $i --root=$mnt/slitaz
227 done
228 cp -a /etc/locale.conf $mnt/slitaz/etc 2> /dev/null
229 cp -a /etc/keymap.conf $mnt/slitaz/etc 2> /dev/null
230 mkinitrd $mnt/slitaz/boot/initrd $mnt/slitaz $useposixovl
231 initrd=initrd
232 extraargs="mount=$(getuuid) subroot=slitaz"
233 fi
234 echo -en "\nInstall boot files..."
235 for i in $media/boot/bzImage $media/boot/*pxe* \
236 $media/boot/isolinux/he* $media/boot/isolinux/opt* \
237 $media/README $media/boot/memtest* ; do
238 [ -s $i ] && cp $i $mnt/slitaz/boot
239 done
240 for i in $mnt/slitaz/boot/memtest $mnt/slitaz/boot/*pxe* ; do
241 [ $(get 0 $i 2> /dev/null || echo 0) -eq 23117 ] &&
242 mv $i $i.exe
243 done
244 gettazboot $mnt/slitaz/boot/tazboot.exe
245 unix2dos > $mnt/slitaz/boot/tazboot.cmd <<EOT
246 kernel=/slitaz/boot/bzimage
247 initrd=/slitaz/boot/$initrd
248 rw root=/dev/null $extraargs autologin
249 EOT
250 unix2dos $mnt/slitaz/boot/he* $mnt/slitaz/boot/opt* \
251 $mnt/slitaz/boot/README
252 [ -d $mnt/slitaz/usr/sbin -a ! -x $mnt/slitaz/usr/sbin/mount.posixovl ] &&
253 cp $(which mount.posixovl) $mnt/slitaz/usr/sbin
254 if "$useposixovl" && grep -qs " $mnt " /proc/mounts &&
255 [ ! -d $mnt/boot/grub ]; then
256 mkdir -p $mnt/boot/grub
257 echo -en "\nInstall grub in /boot/grub..."
258 cp -a /usr/lib/grub/*/* $mnt/boot/grub
259 cat > $mnt/boot/grub/menu.lst <<EOT
260 # /boot/grub/menu.lst: GRUB boot loader configuration.
262 # By default, boot the first entry.
263 default 0
265 # Boot automatically after 8 secs.
266 timeout 8
268 title Microsoft Windows
269 chainloader +1
271 EOT
272 dev=$(grep " $mnt " /proc/mounts | awk '{ print $1 }')
273 base=${dev//[0-9]/}
274 dd if=$base bs=32k count=1 of=$mnt/boot/grub/$(basename $base)
275 cat > $mnt/boot/grub/uninstall-grub.sh <<EOT
276 #!/bin/sh
278 [ -s /boot/grub/$(basename $base) ] &&
279 dd if=/boot/grub/$(basename $base) of=$base
280 EOT
281 grub-install --no-floppy --root-directory=$mnt $base
282 fi
283 if [ -s $mnt/boot/grub/menu.lst ] &&
284 ! grep -q /slitaz/boot/bzimage $mnt/boot/grub/menu.lst; then
285 echo -en "\nUpdate /boot/grub/menu/lst..."
286 cat >> $mnt/boot/grub/menu.lst <<EOT
287 title SliTaz GNU/Linux $(cat $mnt/slitaz/etc/slitaz-release)
288 kernel /slitaz/boot/bzimage rw root=/dev/null $extraargs autologin
289 initrd /slitaz/boot/$initrd
291 EOT
292 fi
293 rm -f /tmp/wait
294 [ "$useposixovl" ] && umount $mnt/slitaz
295 return 0
296 }
298 windev()
299 {
300 if [ -b "$1" ]; then
301 device=$1
302 elif [ "$1" ]; then
303 echo "Invalid Linux/Windows partition"
304 return 1
305 else
306 DEV="$(blkid | grep -iE "(msdos|vfat|ntfs|ext[234]|xfs|btrfs)" | sed 's/:.*//;s|/dev/||')"
307 [ "$DEV" ] || return
308 cat > /tmp/dialog$$ <<EOT
309 $DIALOG --clear \
310 --title " Select your Linux/Windows partition " \
311 --menu "\nPlease select the Linux/Windows partition according to its known size.
312 The data will be kept untouched.\n" \
313 17 70 8 \
314 $(for i in $DEV ; do
315 label="$(blkid | sed "/$i:/!d;s/.*://;s/[^ ]*UUID=[^ ]* //g;s/LABEL=//")"
316 echo -n "/dev/$i \"$(($(cat /sys/block/*/$i/size)/2048))MB $label\" "
317 done)
318 EOT
319 exec 3>&1
320 [ $? -eq 0 ] || return
321 device=$(. /tmp/dialog$$ 2>&1 1>&3)
322 exec 3>&-
323 rm -f /tmp/dialog$$
324 fi
325 mnt=/tmp/mnt$$
326 mkdir -p $mnt && mount $device $mnt
327 }
329 extra_packages()
330 {
331 packages_list=
332 packages_dir=
333 $DIALOG --clear \
334 --title " Extra packages " \
335 --defaultno --yesno \
336 "
337 Do you want to add extra packages ?
338 " 7 70
339 [ $? -eq 0 ] || return
340 [ -s /var/lib/tazpkg/packages.txt ] || tazpkg recharge
341 if [ -s $media/boot/vmlinuz-$(uname -r) ]; then
342 cat > /tmp/dialog$$ <<EOT
343 $DIALOG --clear \
344 --title " Select the packages " \
345 --separate-output \
346 --cancel-label "Skip" \
347 --checklist "Please select the packages you want to install. Try with the first letter." \
348 0 0 0 \\
349 EOT
350 awk -F\| '{ printf "%s \"%s\" off ",$1,$3 }' \
351 /var/lib/tazpkg/packages.desc >> /tmp/dialog$$
352 sh /tmp/dialog$$ 2> /tmp/dialog.out$$
353 [ $? -eq 0 ] && packages_list="$(cat /tmp/dialog.out$$)"
354 fi
355 cat > /tmp/dialog$$ <<EOT
356 $DIALOG --clear \
357 --title "Please select the directory with every custom package to install." \
358 --cancel-label "Skip" \
359 --dselect $PWD 13 78
360 EOT
361 sh /tmp/dialog$$ 2> /tmp/dialog.out$$
362 [ $? -eq 0 ] && packages_dir="$(cat /tmp/dialog.out$$)"
363 rm -f /tmp/dialog$$ /tmp/dialog.out$$
364 }
366 _install()
367 {
368 extra_packages
369 $DIALOG --clear \
370 --title " SliTaz UMSDOS way installation " \
371 --yes-label "Install" --yesno \
372 "\nSliTaz will be installed in the subdirectory \\slitaz of the current
373 Linux/DOS/Windows partition. You can see your files from /mnt/dos.\n\n
374 You can start SliTaz with \\slitaz\\boot\\tazboot.exe\n\n
375 To uninstall SliTaz, you have only to remove this directory.
376 The file \\boot.ini or \\config.sys may be modified too.\n\n
377 SliTaz may run slowly on 'UMSDOS way' installation due to the
378 posixovl filesystem. The 'TAZUSB way' installation runs faster.\n\n
379 To do a traditional installation with disk partitioning,
380 start SliTaz Live with 'SliTaz RAM boot' menu.\n
381 " 19 70
382 [ $? -eq 0 ] || return
383 doinstall
384 }
386 readtazbootconf()
387 {
388 kernel="$(sed '/^kernel=/!d;s/.*=//' $mnt/slitaz/boot/tazboot.cmd)"
389 initrd="$(sed '/^initrd=/!d;s/.*=//' $mnt/slitaz/boot/tazboot.cmd)"
390 cmdline="$(sed '/^kernel=/d;/^initrd=/d' $mnt/slitaz/boot/tazboot.cmd)"
391 }
393 bootinstalled()
394 {
395 [ "$(which kexec)" ] || return
396 [ -x $mnt/slitaz$1 ] || return
397 [ -s $mnt/slitaz/boot/tazboot.cmd ] || return
398 readtazbootconf
399 kexec -l $kernel --initrd $initrd --command-line "$cmdline" || return
400 umount $mnt
401 rm -rf $mnt
402 quit "kexec -e"
403 }
405 mkzip()
406 {
407 device=
408 packages_list=
409 packages_dir=
410 mnt=/tmp/mnt$$
411 mkdir -p $mnt
412 $1 $2 || return
413 for i in bootlace.com grubinst.exe grldr ; do
414 wget -O $mnt/slitaz/boot/$i http://mirror.slitaz.org/boot/$i
415 done
416 readtazbootconf
417 cat > $mnt/slitaz/boot/menu.lst <<EOT
418 title SliTaz
419 kernel $kernel $cmdline
420 initrd $initrd
422 EOT
423 while read file title; do
424 file=$(ls $mnt/slitaz/boot/*$file* 2> /dev/null)
425 [ -s "$file" ] && cat >> $mnt/slitaz/boot/menu.lst <<EOT
426 title $title
427 kernel ${file#$mnt}
429 EOT
430 done <<EOT
431 memtest MemTest
432 pxe Web boot
433 EOT
434 unix2dos $mnt/slitaz/boot/menu.lst
435 unix2dos > $mnt/slitaz/boot/install.txt <<EOT
436 For DOS users (real mode only):
438 Start SliTaz with \\slitaz\\boot\\tazboot.exe
441 For NT/2000/XP users:
443 1- Move the files grldr and menu.lst into the root directory
445 C:\\> copy \\slitaz\\boot\\grldr \\
446 C:\\> copy \\slitaz\\boot\\menu.lst \\
448 2- Remove boot.ini attributes
450 C:\\> attrib -r -h -s boot.ini
452 3- Append the following line to boot.init
454 C:\\grldr="slitaz"
456 4- Restore boot.ini attributes
458 C:\\> attrib +r +h +s boot.ini
460 See http://diddy.boot-land.net/grub4dos/files/README_GRUB4DOS.txt
461 and http://xpt.sourceforge.net/techdocs/nix/disk/boot/boot07-GrubForDosInfo/ar01s03.html
462 EOT
463 ( cd $mnt ; echo 'See \slitaz\boot\install.txt to launch SliTaz.' | \
464 zip -zr9 $(basename "$ISO" .iso).zip slitaz )
465 [ "$(which advzip)" ] && advzip -z4 $mnt/*.zip
466 mv $mnt/*.zip .
467 ls -l $PWD/$(basename "$ISO" .iso).zip
468 umount $mnt
469 rm -rf $mnt
470 }
472 install()
473 {
474 windev $1 || return
475 packages_list=
476 packages_dir=
477 if [ "$1" ]; then
478 doinstall
479 else
480 _install && bootinstalled /sbin/init
481 fi
482 umount $mnt
483 rm -rf $mnt
484 }
486 inst2zip()
487 {
488 if [ "$1" ]; then
489 mkzip doinstall
490 else
491 mkzip _install
492 fi
493 }
495 _installtaz()
496 {
497 $DIALOG --clear \
498 --title " SliTaz TAZUSB way installation " \
499 --yes-label "Install" --yesno \
500 "\nSliTaz will be installed in the subdirectory \\slitaz of the current
501 Linux/DOS/Windows partition. You can see your files from /mnt/dos.\n\n
502 You can start SliTaz with \\slitaz\\boot\\tazboot.exe\n\n
503 To uninstall SliTaz, you have only to remove this directory.
504 The file \\boot.ini or \\config.sys may be modified too.\n\n
505 The filesystem is loaded entirely into memory upon boot to
506 increase responsiveness. Only /home lands on hard disk.\n\n
507 To do a traditional installation with disk partitioning,
508 start SliTaz Live with 'SliTaz RAM boot' menu.\n
509 " 19 70
510 [ $? -eq 0 ] || return
511 doinstall tazusblike
512 }
514 installtaz()
515 {
516 windev $1 || return
517 packages_list=
518 packages_dir=
519 if [ "$1" ]; then
520 doinstall tazusblike
521 else
522 _installtaz && bootinstalled /boot/bzimage
523 fi
524 umount $mnt
525 rm -rf $mnt
526 }
528 insttaz2zip()
529 {
530 if [ "$1" ]; then
531 mkzip doinstall tazusblike
532 else
533 mkzip _installtaz
534 fi
535 }
537 bootiso()
538 {
539 for i in $(ls_r $media/boot/rootfs*gz); do
540 grep -q ' lm ' /proc/cpuinfo && [ -s ${i}64 ] && i=${i}64
541 cat $i
542 n=$((4 - ($(stat -c %s $i) % 4)))
543 [ $n -eq 4 ] || dd if=/dev/zero bs=1 count=$n
544 done > /tmp/initrd$$
545 kernel=$media/boot/bzImage
546 grep -q ' lm ' /proc/cpuinfo && [ -s ${kernel}64 ] && kernel=${kernel}64
547 . /etc/locale.conf
548 kexec -l $kernel --initrd /tmp/initrd$$ --command-line \
549 "root=/dev/null autologin lang=$LANG kmap=$(cat /etc/keymap.conf)" &&
550 rm -f /tmp/initrd$$
551 quit "kexec -e"
552 }
554 tazboot()
555 {
556 if [ -z "$1" ]; then
557 $DIALOG --clear \
558 --title " SliTaz bootloader for DOS " \
559 --yes-label "Install" --yesno \
560 "\nThe file TAZBOOT.EXE will be created in the top directory. It supports
561 any linux kernel, multiple initramfs, a kernel command line and
562 an ISO image file loopback (retrieves files from an ISO file).\n\n
563 Usage: tazboot.exe [[@commands]|[kernel=<bzimage>]
564 [initrd=<rootfs>[,<rootfs2>...]] [bootfrom=<isofile>] cmdline args ...]\n\n
565 Defaults: tazboot @tazboot.cmd or tazboot kernel=bzImage auto\n\n\
566 Examples for tazboot.cmd:\n\n\
567 bootfrom=\\isos\\slitaz-4.0.iso\n\
568 kernel=boot/bzImage\n\
569 initrd=boot/rootfs4.gz,boot/rootfs3.gz,boot/rootfs2.gz,boot/rootfs1.gz\n\
570 rw root=/dev/null autologin\n\n\
571 kernel=\\slitaz\\vmlinuz root=/dev/sda5 ro\n\n
572 Unlike GRUB4DOS, it doesn't require unfragmented ISO image files.\n
573 " 0 0
574 [ $? -eq 0 ] || return
575 fi
576 gettazboot tazboot.exe
577 ls -l $PWD/tazboot.exe
578 }
580 md5()
581 {
582 dotwait "Checking files"
583 ( cd $media ; ${md5sum:-md5sum -c md5sum*} | sort ) > /tmp/data
584 unset md5sum
585 rm -f /tmp/wait
586 if [ "$1" ]; then
587 cat /tmp/data
588 else
589 $DIALOG --clear \
590 --title " Checked files " \
591 --textbox /tmp/data 0 0
592 fi
593 rm -f /tmp/data
594 }
596 gotcdfile()
597 {
598 for i in "$media/$1" "$media/*/$1" "$media/*/isolinux/$1" ; do
599 file=$(ls $i 2> /dev/null | sed q)
600 [ -s "$file" ] && break
601 done
602 }
604 sha()
605 {
606 gotcdfile 'sha*sum*'
607 sha=$(basename $file)
608 md5sum="${sha%sum*}sum -c ${file#$media/}"
609 md5 $@
610 }
612 readme()
613 {
614 gotcdfile 'README*'
615 if [ "$1" ]; then
616 cat $file
617 else
618 $DIALOG --clear \
619 --title " Readme " \
620 --textbox $file 0 0
621 fi
622 }
624 bzimage()
625 {
626 if [ -z "$1" ]; then
627 $DIALOG --clear \
628 --title " Create linux.exe ? " \
629 --yes-label "Install" --yesno \
630 "\nLinux.exe launches the linux kernel under DOS (in real mode only).
631 The cmdline arguments are supported except initrd=,
632 vga= (you can try 'rdev -v') and mem= (partially).
633 \nExample:\nC:\\> linux.exe root=/dev/hda2 ro panic=60\n
634 " 12 70
635 [ $? -eq 0 ] || return
636 fi
637 cp $media/boot/bzImage linux.exe
638 ls -l $PWD/linux.exe
639 }
641 memtest()
642 {
643 if [ -z "$1" ]; then
644 $DIALOG --clear \
645 --title " Create memtest.exe ? " \
646 --yes-label "Install" --yesno \
647 "\nMemtest86 is a thorough, stand alone memory test for x86 architecture
648 computers. BIOS based memory tests are a quick, cursory check and often
649 miss many of the failures that are detected by Memtest86.\n
650 " 0 0
651 [ $? -eq 0 ] || return
652 fi
653 gotcdfile 'memtest*' && cp $file memtest.exe
654 ls -l $PWD/memtest.exe
655 }
657 mkfat12()
658 {
659 [ $(($(get 0 $1) - 0x5A4D)) -eq 0 ] || return
660 J=$(($(get 3 $1 1) + 0x02))
661 R=$((1 + $(get 497 $1 1) + 1 + ($(get 500 $1)-1)/32))
662 [ $R -lt 2500 ] || return
663 [ $((($(get 500 $1)-1) & 31)) -lt 30 ] &&
664 ddq if=$file bs=32 count=1 seek=$(($R*16 - 1)) of=/dev/fd0
665 G="18 0 2 0 0 0 0 0"
666 [ $J -gt 25 ] || G=""
667 F=0
668 for i in 1 2 3; do
669 F=$((((2880-$R-$F-$F)*3+1023)/1024))
670 done
671 bytes2bin 0xEB $J 0x90 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 \
672 0 2 2 $(($R%256)) $(($R/256)) 2 64 0 64 11 0xF0 $F 0 \
673 $G | ddq bs=1 of=/dev/fd0
674 ddq if=/dev/zero bs=512 count=$((4+$F+$F)) seek=$R of=/dev/fd0
675 for i in $R $(($R+$F)) ; do
676 bytes2bin 0xF0 0xFF 0xFF | ddq bs=512 seek=$i of=/dev/fd0
677 done
678 echo -n $(basename $1) | ddq bs=1 seek=3 count=8 of=/dev/fd0
679 }
681 mkfloppy()
682 {
683 dotwait "Create a $(basename $1) boot floppy"
684 ddq if=$1 of=/dev/fd0
685 mkfat12 $1
686 rm -f /tmp/wait
687 }
689 fdmemtest()
690 {
691 if [ -z "$1" ]; then
692 $DIALOG --clear \
693 --title " Create a Memtest86 boot floppy " \
694 --yes-label "Create floppy" --yesno \
695 "\nMemtest86 is a thorough, stand alone memory test for x86 architecture
696 computers. BIOS based memory tests are a quick, cursory check and often
697 miss many of the failures that are detected by Memtest86.\n\n
698 Please insert a blank disk in floppy drive.\n
699 " 0 0
700 [ $? -eq 0 ] || return
701 fi
702 gotcdfile 'memtest*' && mkfloppy $file
703 }
705 pxe()
706 {
707 gotcdfile '?pxe'
708 if [ -z "$1" ]; then
709 $DIALOG --clear \
710 --title " Create $(basename $file).exe ? " \
711 --yes-label "Install" --yesno \
712 "\nBoot your operating system from the internet and enjoy a full system
713 working entirely in RAM with speed and stability in mind. The Linux Kernel
714 and the complete SliTaz compressed root filesystem will be loaded into RAM
715 from the Web using PXE and HTTP protocols.\n
716 " 0 0
717 [ $? -eq 0 ] || return
718 fi
719 cp $file $(basename $file).exe
720 ls -l $PWD/$(basename $file).exe
721 }
723 fdpxe()
724 {
725 if [ -z "$1" ]; then
726 $DIALOG --clear \
727 --title " Create a SliTaz Web boot floppy " \
728 --yes-label "Create floppy" --yesno \
729 "\nBoot your operating system from the internet and enjoy a full system
730 working entirely in RAM with speed and stability in mind. The Linux Kernel
731 and the complete SliTaz compressed root filesystem will be loaded into RAM
732 from the Web using PXE and HTTP protocols.\n\n
733 Please insert a blank disk in floppy drive.\n
734 " 0 0
735 [ $? -eq 0 ] || return
736 fi
737 gotcdfile '?pxe' && mkfloppy $file
738 }
740 menuitem()
741 {
742 [ "$3" ] && shift
743 echo -en "\"$1\" \"$2\""
744 }
746 gotposixovl()
747 {
748 mount.posixovl 2>&1 | grep -qi usage && menuitem "$@"
749 }
751 gotposixovlzip()
752 {
753 [ "$(which zip)" ] && gotposixovl "$1" "$2"
754 }
756 xfile()
757 {
758 [ "$(which $1)" ] && menuitem "$@"
759 }
761 cdfile()
762 {
763 gotcdfile "$1" && menuitem "$@"
764 }
766 isbzImage()
767 {
768 [ $(get 514 $file 4) -eq 1400005704 ] &&
769 [ $(($(get 529 $file 1) & 1)) -eq 1 ]
770 }
772 cdfilex()
773 {
774 gotcdfile "$1" && [ "$(which kexec)" ] && isbzImage && menuitem "$@"
775 }
777 cdfilef()
778 {
779 [ -e /sys/block/fd0 ] && cdfile "$@"
780 }
782 cdexe()
783 {
784 gotcdfile "$1" &&
785 [ $(get 0 $file 2>/dev/null || echo 0) -eq 23117 ] &&
786 menuitem "$@"
787 }
789 misspkg()
790 {
791 for i in zip kexec-tools posixovl cdrkit ; do
792 [ -d /var/lib/tazpkg/installed/$i/ ] && continue
793 [ "$1" != "install" ] && menuitem "$@" && return
794 tazpkg get-install $i
795 done
796 }
798 missing()
799 {
800 misspkg install
801 }
803 ishybrid()
804 {
805 [ $(get 510 "$ISO") -eq 43605 ] || return
806 C=$((2048*$(get $(((17*2048) + 71)) "$ISO" 4)))
807 [ $(get $C "$ISO" 4) -eq 1 ] || return
808 [ $(get $(($C+30)) "$ISO" 4) -eq $((0x88AA55)) ] || return
809 C=$((2048*$(get $(($C+40)) "$ISO" 4)))
810 [ $(get $(($C+64)) "$ISO" 4) -eq 1886961915 ] && menuitem "$@"
811 }
813 isiso()
814 {
815 [ $(get 32769 "$ISO" 4) -eq 808469571 ] && menuitem "$@"
816 }
818 hastazboot()
819 {
820 [ $(get 0 "$ISO") -eq 23117 ] && menuitem "$@"
821 }
823 burnable()
824 {
825 [ "$(sed '/Can wr.*1$/!d' /proc/sys/dev/cdrom/info)" ] && menuitem "$@"
826 }
828 blankable()
829 {
830 [ "$(sed '/Can wr.*RW.*1$/!d' /proc/sys/dev/cdrom/info)" ] && menuitem "$@"
831 }
833 burniso()
834 {
835 wodim -v speed=$(fgrep "drive speed" /proc/sys/dev/cdrom/info | cut -f3) \
836 -eject -multi "$ISO"
837 }
839 blankcd()
840 {
841 wodim -v -blank=fast
842 }
844 gotisomd5()
845 {
846 [ "$(which md5sum 2> /dev/null)" ] &&
847 [ $(get 0 "$ISO") -eq 23117 ] &&
848 [ $(get 18 "$ISO") -ne 0 ] && menuitem "$@"
849 }
851 isomd5()
852 {
853 dotwait "Checking iso image"
854 [ "$(ddq if="$ISO" bs=2k skip=16 \
855 count=$(echo $(get 32848 "$ISO" 4)) | md5sum)" == \
856 "$(ddq if="$ISO" bs=16 count=1 skip=2047 | od -N 16 -t x1 -An | \
857 sed 's/ //g') -" ] && echo "OK" || echo "ERROR"
858 echo -en "\rChecking iso hybrid boot..."
859 n=$(($(get 2 "$IS"O)-1+($(get 4 "$ISO")-1)*512))
860 if [ $n -lt 40000 -a $n -gt 32768 ]; then
861 s=$(get 0 "$ISO" 2 $n | awk '{ i+= $0 } END { print i }')
862 [ $(((1+$s+$(get $(($n+1)) "$ISO" 1)) % 65536)) -eq 0 ] &&
863 echo "OK" || echo "ERROR"
864 fi
865 n=$(($(get 32848 "$ISO" 4)+16))
866 if [ "$(ddq bs=2k skip=$n if="$ISO" | ddq bs=1 count=6)" == "#!boot" ]; then
867 echo -en "\rChecking iso custum boot..."
868 md5="$(ddq bs=2k skip=$n if="$ISO" | while read line; do
869 case "$line" in
870 \#!boot*) echo ${line#*boot } > /tmp/$0$$md5 ;;
871 append=*) echo $line ;;
872 initrd:*) echo $line
873 ddq bs=1 count=${line#initrd:}
874 break ;;
875 *) break ;;
876 esac
877 done | md5sum | cut -c1-32)"
878 [ "$md5" == "$(cat /tmp/$0$$md5)" ] && echo "OK" || echo "ERROR"
879 rm -f /tmp/$0$$md5
880 fi
881 rm -f /tmp/wait
882 [ "$1" ] && return 0
883 echo -e "\rPress RETURN to continue."
884 read n
885 }
887 usbdev()
888 {
889 dotwait "Wait 5 seconds for USB devices"
890 sleep 5
891 rm -f /tmp/wait
892 DEV="$(grep -l 1 /sys/block/*/removable | \
893 sed 's|/sys/block/\(.*\)/removable|\1|')"
894 grep -qs 1 /sys/block/$DEV/ro && return
895 [ "$DEV" ] || return
896 cat > /tmp/dialog$$ <<EOT
897 $DIALOG --clear \
898 --title " Select your USB key " \
899 --menu "\nPlease select the USB key according to its known size.\n\n" \
900 0 0 0 \
901 $(for i in $DEV ; do
902 echo -n "/dev/$i \"$(($(cat /sys/block/$i/size)/2048))MB $(cat /sys/block/$i/device/model 2> /dev/null)\" "
903 done) \
905 EOT
906 exec 3>&1
907 device=$(. /tmp/dialog$$ 2>&1 1>&3)
908 rm -f /tmp/dialog$$
909 retval=$?
910 exec 3>&-
911 rm -f /tmp/dialog$$
912 [ $retval -eq 0 ]
913 }
915 tazusbmsg()
916 {
917 [ "$(which tazusb 2> /dev/null)" ] || return
918 echo "You should choose 'USB key read/write installation' to be
919 able to save the package updates or your own configuration and data files.\n\n"
920 }
922 usbbootkey()
923 {
924 if [ -b "$1" ]; then
925 device=$1
926 elif [ "$1" ]; then
927 echo "Invalid USB key device"
928 return 1
929 else
930 $DIALOG --clear \
931 --title " Create a USB boot key " \
932 --yes-label "Continue" --yesno \
933 "\nThe USB key will be used like a CD-ROM. You will not be able to write
934 any data on the boot partition.\n\n
935 An extra FAT32 partition will be created with the remaining free space.\n\n
936 $(tazusbmsg)Please plug your USB stick in now.\n
937 " 16 70
938 [ $? -eq 0 ] || return
939 usbdev || return
941 # perform dd in progress bar
942 max=$(($(stat -c %s "$ISO")/2048))
943 i=0; ddq if="$ISO" bs=1024k | (
944 while ddq bs=1024k count=1 ; do
945 i=$(($i + 1))
946 [ $i -gt $max ] && break
947 echo $((($i*100)/$max)) | dialog --gauge \
948 " The ISO image transfer can be long. Please wait..." \
949 6 70 0 > /dev/tty 2>&1
950 done ) > $device
951 fi
953 # partition + fat32 format for the remaining space
954 for p in 0 16; do
955 get $((450+$p)) $device 2 12 | xargs echo | {
956 read dx cx ol oh ll lh
957 [ $dx -eq $((0x3F17)) ] || continue
958 cx=$(($cx & 0xFF00))
959 ofs=$(($ll+($lh<<16)))
960 n=$(($(cat /sys/block/${device#/dev/}/size)-$ofs))
961 m=$(($cx+($n/8)))
962 [ $m -gt $((0x3FF00)) ] && m=$((0x3FF00))
963 m=$((($m & 0xFF00)+(($m>>16)<<6)))
964 words2bin 0 $((0x101+$cx)) 0x3F0B $((32+$m)) \
965 $ll $lh $(($n & 0xFFFF)) $(($n >> 16)) | \
966 ddq bs=1 seek=$((462-$p)) of=$device
967 if [ "$(which mkdosfs 2> /dev/null)" ]; then
968 losetup -o $((512*$ofs)) /dev/loop2 $device
969 mkdosfs -n "SLITAZ BOOT" /dev/loop2
970 words2bin $(($ofs & 0xFFFF)) $(($ofs >> 16)) | \
971 ddq bs=1 seek=28 of=/dev/loop2
972 sync
973 losetup -d /dev/loop2
974 fi
975 }
976 done
977 }
979 usbkey()
980 {
981 $DIALOG --clear \
982 --title " Create a SliTaz USB key " \
983 --yes-label "Continue" --yesno \
984 "\nUnlike a hard drive install, the filesystem is kept in a compressed
985 rootfs.gz. The filesystem is loaded entirely into memory upon boot.
986 This should increase responsiveness, protect the filesystem against
987 accidental corruption and reduce read/writes to the USB drive.
988 Once setup, the tazusb utility can rewrite the root filesystem
989 with any changes you have made since booting up,
990 giving the effective benefits of a hard drive install.\n\n
991 /home is mounted on boot using the UUID of your particular flash drive.
992 Unlike a device name, the UUID has the benefit of never changing from machine
993 to machine.\n\n
994 Please plug your USB stick in now.\n
995 " 19 70
996 [ $? -eq 0 ] || return
997 usbdev || return
998 exec 3>&1
999 format=`$DIALOG --clear \
1000 --title " Select the filesystem " \
1001 --radiolist "\nPlease select the filesystem type to create.\n\n\
1002 The filesystem creation will erase all the data \
1003 in the USB key." 14 70 4 \
1004 "none" "Do not erase the USB key" on \
1005 "ext3" "Ext3 journaling filesystem" off \
1006 "ext2" "Ext2 filesystem" off \
1007 "fat32" "Windows FAT32 filesystem" off \
1008 2>&1 1>&3`
1009 retval=$?
1010 exec 3>&-
1011 [ $retval -eq 0 ] || return
1012 [ "$format" != "none" ] && tazusb format $device "SliTaz" $format
1013 tazusb gen-iso2usb "$ISO" $device
1014 }
1016 dokexec()
1017 {
1018 kexec -l $file || return
1019 quit "kexec -e"
1020 }
1022 runmemtest()
1023 {
1024 gotcdfile 'memtest*' && dokexec
1025 }
1027 runpxe()
1028 {
1029 gotcdfile '?pxe' && dokexec
1030 }
1032 flavdata()
1033 {
1034 [ $(get 1024 "$ISO") -eq 35615 ] && n=2 || n=$((1+$(get 417 "$ISO" 1)))
1035 dd if="$ISO" bs=512 skip=$n count=20 2>/dev/null | zcat 2>/dev/null
1036 }
1038 hasflavinfo()
1039 {
1040 [ "$(flavdata | dd bs=1 count=8 2> /dev/null | strings)" == \
1041 "07070100" ] && menuitem "$@"
1042 }
1044 showfavinfo()
1045 {
1046 mkdir -p /tmp/data
1047 flavdata | ( cd /tmp/data ; cpio -i )
1048 file=/tmp/data/info
1049 cat /tmp/data/*desc > $file
1050 if [ -s /tmp/data/*receipt ]; then
1051 echo "=== receipt ==="
1052 cat /tmp/data/*receipt
1053 fi >> $file
1054 for i in /tmp/data/*list* ; do
1055 echo "=== extra ${i#*list} files"
1056 cat $i
1057 done >> $file
1058 if [ "$1" ]; then
1059 cat $file
1060 else
1061 $DIALOG --clear \
1062 --title " Flavor info " \
1063 --textbox $file 0 0
1064 fi
1065 rm -rf /tmp/data
1066 }
1068 flavor()
1069 {
1070 name="$(flavdata | cpio -t 2> /dev/null | sed 's/.[a-z]*$//;q')"
1071 echo "Create ${name:=flavor}.flavor..."
1072 tazlito iso2flavor "$ISO" $name
1073 ls -l $name.flavor
1074 }
1076 if [ "$1" == "--build" ]; then #install-begin
1077 uuencode -m - < ifmem.bin | sed -e '/^ifmemcode$/r/dev/stdin' \
1078 -e '/^ifmemcode$/d' -i $0
1079 uuencode -m - < bootloader.bin | sed -e '/^bootloader$/r/dev/stdin' \
1080 -e '/^bootloader$/d' -e '/install-begin$/,/install-end$/d' -i $0
1081 exit
1082 fi #install-end
1083 parse_isolinux()
1084 {
1085 awk 'BEGIN { IGNORECASE=1 }
1086 function multi(n)
1087 {
1088 auto=$n
1089 for (--n; n < NF; n+=2) {
1090 s=$n
1091 if (s ~ /M$/) s = substr(s,0,length(s)-1)
1092 else s /= 1024
1093 sizes=int(s) " " sizes
1094 }
1095 next
1096 }
1097 {
1098 if ($1 == "LABEL") {
1099 label=$2
1100 if (auto == "") auto=label
1101 }
1102 if ($1 == "KERNEL" || $1 == "COM32") kernel[label]=$2
1103 if ($1 == "INITRD") initrd[label]=$2
1104 if ($1 == "APPEND") {
1105 i=2
1106 if (kernel[label] ~ "ifmem.c32") multi(3)
1107 if (kernel[label] ~ "c32box.c32") {
1108 if ($2 == "linux") { kernel[label]=$3; i=4 }
1109 if ($2 == "ifmem") multi(4)
1110 }
1111 if (kernel[label] ~ "ifcpu64.c32") { auto=$4; next }
1112 while (i <= NF) {
1113 if ($i ~ "^initrd=") initrd[label]=substr($i,8)
1114 else cmdline[label]=cmdline[label] " " $i
1115 i++
1116 }
1117 }
1118 }
1119 END {
1120 print "KERNEL=\"" kernel[auto] "\""
1121 print "INITRD=\"" initrd[auto] "\""
1122 print "CMDLINE=\"" substr(cmdline[auto],2) "\""
1123 print "SIZES=\"" sizes "\""
1124 }'
1125 }
1127 locase()
1128 {
1129 echo "$1" | tr [A-Z] [a-z]
1130 }
1132 ifmemcode()
1133 {
1134 uudecode <<EOT
1135 ifmemcode
1136 EOT
1137 }
1139 floppyset()
1140 {
1141 gotcdfile isolinux.cfg
1142 parse_isolinux < $file > /tmp/var$$
1143 . /tmp/var$$
1144 for i in $media/$KERNEL $(dirname $file)/$KERNEL $media/$(locase $KERNEL) \
1145 $(dirname $file)/$(locase $KERNEL); do
1146 [ -s $i ] && KERNEL=$i && break
1147 done
1148 rm -f /tmp/var$$
1149 [ $(get 514 $KERNEL 4) -eq 1400005704 ] || return
1150 n=$(($(get 497 $KERNEL 1)+1))
1151 ddq bs=512 count=$n if=$KERNEL of=/tmp/fd$$
1152 uudecode <<EOT | ddq of=/tmp/fd$$ conv=notrunc
1153 bootloader
1154 EOT
1155 pos=$(($n*512))
1156 if [ -n "$CMDLINE" ]; then
1157 echo -n "$CMDLINE" | ddq bs=512 count=1 conv=sync >> /tmp/fd$$
1158 bytes2bin $n | ddq conv=notrunc \
1159 bs=1 seek=497 count=1 of=/tmp/fd$$
1160 words2bin $pos | ddq conv=notrunc \
1161 bs=1 seek=34 count=2 of=/tmp/fd$$
1162 [ $(get 518 $KERNEL 4) -ge 514 ] &&
1163 words2bin 32768 9 | ddq conv=notrunc \
1164 bs=1 seek=552 count=4 of=/tmp/fd$$
1165 fi
1166 syssize=$(echo $(get 500 /tmp/fd$$ 4))
1167 ddq bs=512 skip=$n if=$KERNEL | cat - /dev/zero | \
1168 ddq bs=512 count=$((($syssize+31)/32)) conv=sync >> /tmp/fd$$
1169 base=$(stat -c %s /tmp/fd$$)
1170 len=
1171 if [ "$INITRD" ]; then
1172 l=0
1173 for i in ${INITRD//,/ }; do
1174 for j in $media/$i $(dirname $KERNEL)/$i $media/$(locase $i) \
1175 $(dirname $KERNEL)/$(locase $i); do
1176 [ -s $j ] && i=$j && break
1177 done
1178 ddq if=$i >> /tmp/fd$$
1179 l=$(($l+$(stat -c %s $i)))
1180 r=$((4 - ($l % 4)))
1181 if [ $r -ne 4 ]; then
1182 ddq if=/dev/zero bs=1 count=$r >> /tmp/fd$$
1183 l=$(($l + $r))
1184 fi
1185 case "$i:$INITRD" in
1186 *rootfs.gz:*rootfs.gz,*) continue # loram
1187 esac
1188 len="$len $l"; l=0
1189 done
1190 rdadrs=${RDADRS:-$(((($syssize*16)+0x1F0000) & -4096))}
1191 words2bin $(($rdadrs & 0xFFFF)) $(($rdadrs >> 16)) | ddq \
1192 conv=notrunc bs=1 seek=536 count=4 of=/tmp/fd$$
1193 fi
1194 n=$(echo $len | wc -w)
1195 if [ $((494 - $(get 494 /tmp/fd$$))) -ge $(($n * 4)) ]; then
1196 i=$(($(get 494 /tmp/fd$$)))
1197 bytes2bin $(($i + ($n*4) - 256)) | ddq bs=1 conv=notrunc \
1198 seek=496 count=1 of=/tmp/fd$$
1199 else
1200 i=$(($pos + 0x1FC - ($n*4)))
1201 bytes2bin $(($i % 256)) $((i / 256)) 252 | ddq bs=1 \
1202 conv=notrunc seek=494 count=3 of=/tmp/fd$$
1203 s=$(($i - 2*$(echo "$SIZES" | wc -w)))
1204 p=$(($s - $(ifmemcode | wc -c)))
1205 ifmemcode | ddq bs=1 conv=notrunc seek=$p of=/tmp/fd$$
1206 words2bin $SIZES | ddq bs=1 conv=notrunc seek=$s of=/tmp/fd$$
1207 bytes2bin 154 $(($p%256)) $(($p/256)) 0 144 | \
1208 ddq bs=1 conv=notrunc seek=60 of=/tmp/fd$$
1209 fi
1210 for r in $len ; do
1211 words2bin $(($r & 0xFFFF)) $(($r >> 16)) | ddq conv=notrunc \
1212 bs=1 seek=$i count=4 of=/tmp/fd$$
1213 i=$(($i + 4))
1214 done
1215 split -b 1440k /tmp/fd$$ fd$$
1216 rm -f /tmp/fd$$
1217 n=1; i=0; r=0
1218 set -- $len
1219 ls fd$$* | while read file ; do
1220 if [ $i -gt $(($1+$base)) ]; then
1221 shift
1222 r=$(($r+100)); n=0; i=0; base=0
1223 fi
1224 ddq of=$file bs=18k seek=80 count=0
1225 i=$(($i+1474560))
1226 printf "mv %s fd%03d.img\n" $file $(($r+$n))
1227 n=$(($n+1))
1228 done | sh
1229 ls fd???.img
1230 }
1232 quit()
1233 {
1234 umount -d $media
1235 rmdir $media
1236 ${1:-exit}
1237 }
1239 isotitle()
1240 {
1241 echo "$(basename "$ISO") $(stat -c %y $media/.|sed 's/ .*//') $(blkid \
1242 "$ISO" | sed 's/.*LABEL="\([^"]*\).*/\1/')"
1243 }
1245 ISO="${1:-/dev/null}"
1246 [ -z "$(isiso 2> /dev/null)" ] && echo "Usage : $0 file.iso" && exit 1
1247 media=/tmp/media$$
1248 mkdir -p $media
1249 mount -o loop,ro "$ISO" $media
1251 if [ "$2" == "list" ]; then
1252 sed '/^\$(.*") \\/!d;s/^\$(\(.*\)").*/\1"/' $0 | while read line; do
1253 eval $line
1254 echo
1255 done | sed '/^$/d;/"usbkey"/d'
1256 quit
1257 fi
1258 if grep -q "^$2()" $0; then
1259 exe=$2
1260 shift 2
1261 if [ -n "$(eval $(grep "\"$exe\"" $0 | sed \
1262 '/^\$/!d;s/.(\(.*\)[\t ]*".*"[\t ]*".*/\1/'))" ]; then
1263 isotitle
1264 grep "\"$exe\"" $0 | sed '/^\$/!d;s/.*"[\t ]*"\(.*\)".*/\1/'
1265 echo ----
1266 $exe "$@"
1267 fi
1268 quit
1269 fi
1271 while true; do
1272 cat > /tmp/dialog$$ <<EOT
1273 $DIALOG --clear \
1274 --title " $(isotitle) " \
1275 --menu "" -2 70 0 \
1276 $(cdfile 'README*' "readme" "Show the README file") \
1277 $(gotisomd5 "isomd5" "Check the ISO image") \
1278 $(cdfile 'md5sum*' "md5" "Check the ISO files") \
1279 $(cdfile 'sha*sum*' "sha" "Check the ISO files") \
1280 $(cdfilex boot/bzImage "bootiso" "Boot the ISO image") \
1281 $(burnable "burniso" "Burn the ISO image") \
1282 $(blankable "blankcd" "Blank the CD/DVD") \
1283 $(gotposixovl "install" "Hard disk installation (UMSDOS way)") \
1284 $(gotposixovl "installtaz" "Hard disk installation (TAZUSB way)") \
1285 $(gotposixovlzip "inst2zip" "ZIP installation archive (UMSDOS way)") \
1286 $(gotposixovlzip "insttaz2zip" "ZIP installation archive (TAZUSB way)") \
1287 $(xfile tazusb "usbkey" "USB key read/write installation") \
1288 $(ishybrid "usbbootkey" "USB boot key (read only)") \
1289 $(hasflavinfo "showfavinfo" "Show flavor extra info") \
1290 $(xfile tazlito "flavor" "Get flavor file") \
1291 $(cdfile isolinux.cfg "floppyset" "Boot floppy set") \
1292 $(hastazboot "tazboot" "Get tazboot.exe Linux loader") \
1293 $(cdexe boot/bzImage "bzimage" "Get linux DOS/EXE file") \
1294 $(cdexe 'memtest*' "memtest" "Get Memtest86 DOS/EXE file") \
1295 $(cdfilef 'memtest*' "fdmemtest" "Create a Memtest86 boot floppy") \
1296 $(cdfilex 'memtest*' "runmemtest" "Start Memtest86") \
1297 $(cdexe '?pxe' "pxe" "Get SliTaz Web boot DOS/EXE utility") \
1298 $(cdfilef '?pxe' "fdpxe" "Create a SliTaz Web boot floppy") \
1299 $(cdfilex '?pxe' "runpxe" "Start the SliTaz Web boot utility") \
1300 $(misspkg "missing" "Install packages to get more options") \
1301 $(menuitem "quit" "Quit this utility")
1302 EOT
1303 exec 3>&1
1304 value=$(. /tmp/dialog$$ 2>&1 1>&3)
1305 retval=$?
1306 exec 3>&-
1307 rm -f /tmp/dialog$$
1308 [ $retval -eq 0 ] || break
1309 $value
1310 done