SliTaz Repositories

1 # SliTaz package receipt.

2

3 PACKAGE="ipxe"

4 VERSION="1.0.0-20190427"

5 GIT_TAG="a95966955c6904b975b0ccec0dd338385fb3066b"

6 CATEGORY="system-tools"

7 SHORT_DESC="Open source network boot firmware."

8 MAINTAINER="pascal.bellard@slitaz.org"

9 LICENSE="GPL2"

10 WEB_SITE="https://ipxe.org/"

11 TARBALL="$PACKAGE-$VERSION.tar.bz2"

12 WGET_URL="https://git.ipxe.org/ipxe.git/snapshot/$GIT_TAG.tar.bz2"

13

14 DEPENDS=""

15 BUILD_DEPENDS="perl wget liblzma-dev syslinux"

16

17 # Rules to configure and make the package.

18 compile_rules()

19 {

20 cd $src/src

21 sed -i 's|SIZEOF_LOW_4GB / SIZEOF_2MB_PAGE|1 << (SIZEOF_LOW_4GB_LOG2 - SIZEOF_2MB_PAGE_LOG2)|' arch/x86/transitions/librm.S

22 sed -i 's/-llzma/& -lpthread/' Makefile.*

23 sed -i 's|//\(#define.*CONSOLE_FRAMEBUFFER\)|\1|' config/console.h

24 sed -i 's|//\(#define.*CONSOLE_SERIAL\)|\1|' config/console.h

25 sed -i -e 's|//\(#define.*IMAGE_PNG\)|\1|' \

26 -e 's|.*\(NET_PROTO_IPV6\)|#define \1|' \

27 -e 's|//\(#define.*CONSOLE_CMD\)|\1|' \

28 -e 's|//\(#define.*REBOOT_CMD\)|\1|' config/general.h

29 sed -i "s|\(TAG_LINE \"\)|\1${VERSION#*-} -- |" config/branding.h

30 sed -i 's|//\(#define.*CPUID_SETTINGS\)|\1|' config/settings.h

31 pxelinux="$(ls $WOK/syslinux/source/*/core/pxelinux.0)"

32 make bin/undionly.kkkpxe EMBED=$stuff/ipxelinux.ipxe,$pxelinux &&

33 mv bin/undionly.kkkpxe bin/ipxelinux.0

34 make bin-i386-efi/snponly.efi EMBED=$stuff/ipxelinux.ipxe,$pxelinux &&

35 mv bin-i386-efi/snponly.efi bin-i386-efi/ipxelinux.efi

36 make bin/undionly.pxe bin/undionly.kpxe bin/undionly.kkpxe \

37 bin/undionly.kkkpxe bin/ipxe.pxe bin/ipxe.kpxe bin/ipxe.kkpxe \

38 bin/ipxe.kkkpxe bin/ipxe.nbi bin/ipxe.lkrn bin-i386-efi/ipxe.efi \

39 bin-i386-efi/snponly.efi bin/ipxe.exe EMBED=$stuff/ipxe.cmd

40 cp $stuff/bootloader.S .

41 cc -o bootloader.o -Wa,-a=bootloader.lst -c bootloader.S

42 objcopy -O binary bootloader.o bootloader.bin

43 size=$(stat -c %s bin/ipxe.lkrn)

44 while read ofs val ; do

45 printf '\\\\x%02X\\\\x%02X' $(($val & 255)) $(($val / 256)) | \

46 xargs echo -en|dd bs=1 conv=notrunc of=bootloader.bin seek=$ofs

47 done 2> /dev/null <<EOT

48 4 $((($size+511)/512))

49 14 $((($size+15)/16))

50 EOT

51 }

52

53 # Rules to gen a SliTaz package suitable for Tazpkg.

54 genpkg_rules()

55 {

56 mkdir -p $fs/boot $install/usr/share

57 cp -a $src/src/doc $install/usr/share

58 cp -a $src/src/bin/ipxe.lkrn $fs/boot/ipxe.exe

59 dd if=$src/src/bootloader.bin of=$fs/boot/ipxe.exe conv=notrunc

60 }

61

62 # Pre and post install commands for Tazpkg.

63 post_install()

64 {

65 [ -s $1/boot/isolinux/isolinux.cfg ] &&

66 ! grep -qs 'Web Boot' $1/boot/isolinux/isolinux.cfg &&

67 sed -i 's|i18n.cfg|&\n\

68 LABEL web zeb\

69 MENU LABEL Web Boot\

70 KERNEL /boot/ipxe.exe|' $1/boot/isolinux/isolinux.cfg

71 true

72 }