SliTaz Repositories

     1.1 --- a/linux/stuff/bootloader.sh	Sun Nov 22 17:34:55 2009 +0100
     1.2 +++ b/linux/stuff/bootloader.sh	Mon Nov 23 11:01:54 2009 +0100
     1.3 @@ -75,17 +75,16 @@
     1.4  	uudecode <<EOT | dd of=$bs conv=notrunc 2> /dev/null
     1.5  begin-base64 644 -
     1.6  v/Sd/GgAkAcxyQYXify7eACO2cU3sQbzpY7ZiSeMRwKg8X2YQAYfxkX4P/qX
     1.7 -mEEw9jHb6FcBvgACgEwRgMdEJACcA3QO6GYBvigCORxyLkeLHFboQQFfizXo
     1.8 -UgGwIOg+AbAIzRBOmM0WPAh0BZiJBEZGOzV08OgmATwKdd+5GABqAOL8ieaw
     1.9 -D7/0Af5NHLEFtJOJRBywAYlEFJmJVBCJVBhmMdtD0+NLZgMdZtPraAAQB7+A
    1.10 -ACn7nHMCAd9TVjHb6NQAXrkAgLSH/kQczRVbnXfcoRoCSL8cArEJOEQccrAx
    1.11 -wM0T6gAAIJCwRijIvrkB6L0AXesjgPkTcgQ4wXdogP4CcgQ45ndpgP1Qc3Ng
    1.12 -BlJRU5a0AlC5BgBRsQTBxQSwDyHoBJAnFEAn6HMA4u6wIM0QWeK0mM0TYTH2
    1.13 -rZGtkq1QKMh3ArABmDn4cgKJ+FBStALNE1qVXlhynCn3AfHB5gkB8zjBdSaI
    1.14 -yP7GsQE45nUciPS2AP7FPBN1EoD9UHINtQBgvrwB6CUAmM0WYaMEAFJRZo8G
    1.15 -AAAJ/3WeFgewLrQOuwcAzRA8DXUOsArr8bAN6Oz/rAjAdfjDWDoASW5zZXJ0
    1.16 -IG5leHQgZmxvcHB5IGFuZCBwcmVzcyBhbnkga2V5IHRvIGNvbnRpbnVlLgcN
    1.17 -AA==
    1.18 +mEEx2+hAAb4AAoBMEYDHRCQAnAN0DuhmAb4oAjkcci9HixxW6EIBX4s16FIB
    1.19 +sCDNELAIzRBOmM0WPAh0BJiJBK07NXTx6CsBPAp14Yh8/rkYAGoA4vyJ5rAP
    1.20 +v/QB/k0csQW0k4lEHLABiUQUmYlUEIlUGGYx20PT40tmAx1m0+toABAHv4AA
    1.21 +KfuccwIB31NWMdvo1ABeuQCAtIf+RBzNFVudd9yhGgJIvxwCsQk4RBxysDHA
    1.22 +zRPqAAAgkLBGKMi+twHovABd6yOA+RNyBDjBd2iA/gJyBDjmd2mA/VBzc2AG
    1.23 +UlFTlrQCULkGAFGxBMHFBLAPIegEkCcUQCfodQDi7rAgzRBZ4rSYzRNhMfat
    1.24 +ka2SrVAoyHcCsAGYOfhyAon4UFK0As0TWpVeWHKcKfcB8cHmCQHzOMF1JojI
    1.25 +/saxATjmdRyI9P7FtgA8E3USgP1Qcg21AGC+ugHoJACYzRZhowQAUlFmjwYA
    1.26 +AAn/dZ4WB7AxLAO0DrsHAM0QPA1088OwDejv/6wIwHX4w1g6AEluc2VydCBu
    1.27 +ZXh0IGZsb3BweSBhbmQgcHJlc3MgYW55IGtleSB0byBjb250aW51ZS4HDQA=
    1.28  ====
    1.29  EOT
    1.30  

     2.1 --- a/linux/stuff/linux-header-2.6.30.6.u	Sun Nov 22 17:34:55 2009 +0100
     2.2 +++ b/linux/stuff/linux-header-2.6.30.6.u	Mon Nov 23 11:01:54 2009 +0100
     2.3 @@ -18,7 +18,7 @@
     2.4   
     2.5   #ifndef SVGA_MODE
     2.6   #define SVGA_MODE ASK_VGA
     2.7 -@@ -39,53 +41,392 @@
     2.8 +@@ -39,53 +41,391 @@
     2.9   #define ROOT_RDONLY 1
    2.10   #endif
    2.11   
    2.12 @@ -107,7 +107,6 @@
    2.13  +	xchg	%ax, %di		# sector count
    2.14  +	cbw				# limits = 0
    2.15  +	incw	%cx			# cylinder 0, sector 1
    2.16 -+	xorb	%dh, %dh		# head 0, current drive
    2.17  +	xorw	%bx, %bx
    2.18  +	call	read_first_sectors	# read setup
    2.19  +
    2.20 @@ -137,7 +136,7 @@
    2.21  +	call	puts
    2.22  +cmdlp:
    2.23  +	movb	$32, %al		# clear end of line
    2.24 -+	call	putc			#  with Space
    2.25 ++	int	$0x10			#  with Space
    2.26  +	movb	$8, %al			#   and BackSpace
    2.27   	int	$0x10
    2.28  -	jmp	msg_loop
    2.29 @@ -149,14 +148,14 @@
    2.30  +	je	cmdbs
    2.31  +	cbw
    2.32  +	movw	%ax, (%si)		# store end of string too
    2.33 -+	incw	%si
    2.34 -+	incw	%si
    2.35 ++	lodsw				# %si += 2
    2.36  +cmdbs:
    2.37  +	cmpw	(%di), %si		# lower limit is checked
    2.38  +	je	cmdget			#   but upper limit not
    2.39 -+	call	putc
    2.40 ++	call	putc			# set %ah and %bx
    2.41  +	cmpb	$10, %al		# Enter ?
    2.42  +	jne	cmdlp
    2.43 ++	movb	%bh,-2(%si)		# remove CR
    2.44  +endcmdline:
    2.45  +	
    2.46  +nocmdline:
    2.47 @@ -374,9 +373,10 @@
    2.48  +        cmpb    %cl,%dh			# reach head limit ?
    2.49  +        je	bdendlp
    2.50  +#endif
    2.51 -+        movb    $0,%dh			# first head
    2.52  +# NOTE : support 256 cylinders max
    2.53  +        incb    %ch			# next cylinder
    2.54 ++read_first_sectors:
    2.55 ++        movb    $0,%dh			# first head
    2.56  +#ifndef FLOPPY_1440K_ONLY
    2.57  +	cmpb	$FLOPPY_SECTORS+1,%al	# 1.44M floppy ?
    2.58  +        jne	bdendlp
    2.59 @@ -393,7 +393,6 @@
    2.60  -	int	$0x19
    2.61  +	popaw
    2.62  +bdendlp:
    2.63 -+read_first_sectors:
    2.64  +#ifndef FLOPPY_1440K_ONLY
    2.65  +	movw	%ax, limits
    2.66  +#endif
    2.67 @@ -405,15 +404,16 @@
    2.68  +        jne	read_sectorslp
    2.69  +	pushw	%ss
    2.70  +	popw	%es			# restore es
    2.71 -+	movb	$0x2e, %al 		# loading... message 2e = .
    2.72 ++	movb	$0x2e+3, %al 		# 2e = .
    2.73 ++putclf:
    2.74 ++	subb	$3, %al
    2.75  +putc:
    2.76  +	movb	$0xe, %ah
    2.77  +	movw	$7, %bx			#   one dot each 64k
    2.78  + 	int	$0x10
    2.79  +	cmp	$0xd, %al		# CR ?
    2.80 -+	jne	return
    2.81 -+	movb	$0xa, %al		# LF
    2.82 -+	jmp	putc
    2.83 ++	je	putclf
    2.84 ++	ret
    2.85   
    2.86  -	# int 0x19 should never return.  In case it does anyway,
    2.87  -	# invoke the BIOS reset code...
    2.88 @@ -425,7 +425,6 @@
    2.89  +	lodsb
    2.90  +	orb	%al,%al			# end of string is \0
    2.91  +	jnz	putcs
    2.92 -+return:
    2.93  +	ret
    2.94   
    2.95  -	.section ".bsdata", "a"