flavors-stable rev 115
core: remove all rootfs addfiles ther are now packaged
| author | Christophe Lincoln <pankso@slitaz.org> |
|---|---|
| date | Sat Jun 18 11:37:16 2011 +0200 (2011-06-18) |
| parents | 6892605beb55 |
| children | b2d79d7113d2 |
| files | core/rootfs/etc/lxpanel/slitaz/panels/bottom core/rootfs/etc/lxpanel/slitaz/panels/panel core/rootfs/etc/slitaz/tazpanel.conf core/rootfs/usr/bin/tazinst core/rootfs/usr/share/doc/slitaz/tazinst.fr.html core/rootfs/usr/share/images/panel-background.png core/rootfs/usr/share/slim/themes/slitaz/panel.png core/rootfs/usr/share/slim/themes/slitaz/slim.theme |
line diff
1.1 --- a/core/rootfs/etc/lxpanel/slitaz/panels/bottom Wed Jun 01 12:07:12 2011 +0200 1.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 1.3 @@ -1,70 +0,0 @@ 1.4 -# lxpanel <profile> config file. Manually editing is not recommended. 1.5 -# Use preference dialog in lxpanel to adjust config when you can. 1.6 - 1.7 -Global { 1.8 - edge=bottom 1.9 - allign=center 1.10 - margin=0 1.11 - widthtype=percent 1.12 - width=100 1.13 - height=24 1.14 - transparent=0 1.15 - tintcolor=#ffffff 1.16 - alpha=20 1.17 - autohide=0 1.18 - heightwhenhidden=2 1.19 - setdocktype=0 1.20 - setpartialstrut=1 1.21 - usefontcolor=1 1.22 - fontcolor=#ffffff 1.23 - background=1 1.24 - backgroundfile=/usr/share/images/panel-background.png 1.25 - iconsize=24 1.26 -} 1.27 - 1.28 -Plugin { 1.29 - type = pager 1.30 -} 1.31 - 1.32 -Plugin { 1.33 - type = space 1.34 - Config { 1.35 - Size=4 1.36 - } 1.37 -} 1.38 - 1.39 -Plugin { 1.40 - type = taskbar 1.41 - expand=1 1.42 - Config { 1.43 - tooltips=1 1.44 - IconsOnly=0 1.45 - ShowAllDesks=0 1.46 - UseMouseWheel=1 1.47 - UseUrgencyHint=1 1.48 - FlatButton=1 1.49 - MaxTaskWidth=200 1.50 - spacing=2 1.51 - GroupedTasks=1 1.52 - } 1.53 -} 1.54 - 1.55 -Plugin { 1.56 - type = dclock 1.57 - Config { 1.58 - ClockFmt=%R 1.59 - TooltipFmt=%A %x - %R 1.60 - BoldFont=1 1.61 - IconOnly=0 1.62 - } 1.63 -} 1.64 - 1.65 -Plugin { 1.66 - type = launchbar 1.67 - Config { 1.68 - Button { 1.69 - id=/usr/share/applications/slitaz-logout.desktop 1.70 - } 1.71 - } 1.72 -} 1.73 -
2.1 --- a/core/rootfs/etc/lxpanel/slitaz/panels/panel Wed Jun 01 12:07:12 2011 +0200 2.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 2.3 @@ -1,146 +0,0 @@ 2.4 -# lxpanel <profile> config file. Manually editing is not recommended. 2.5 -# Use preference dialog in lxpanel to adjust config when you can. 2.6 - 2.7 -Global { 2.8 - edge=top 2.9 - allign=center 2.10 - margin=0 2.11 - widthtype=percent 2.12 - width=100 2.13 - height=24 2.14 - transparent=0 2.15 - tintcolor=#ffffff 2.16 - alpha=20 2.17 - autohide=0 2.18 - heightwhenhidden=2 2.19 - setdocktype=0 2.20 - setpartialstrut=1 2.21 - usefontcolor=1 2.22 - fontcolor=#ffffff 2.23 - background=1 2.24 - backgroundfile=/usr/share/images/panel-background.png 2.25 - iconsize=22 2.26 -} 2.27 - 2.28 -Plugin { 2.29 - type = space 2.30 - Config { 2.31 - Size=4 2.32 - } 2.33 -} 2.34 - 2.35 -Plugin { 2.36 - type = menu 2.37 - Config { 2.38 - name=SliTazMenu.directory 2.39 - image=/usr/share/pixmaps/slitaz-menu.png 2.40 - system { 2.41 - } 2.42 - separator { 2.43 - } 2.44 - item { 2.45 - image=exec 2.46 - command=run 2.47 - } 2.48 - separator { 2.49 - } 2.50 - item { 2.51 - image=logout 2.52 - command=logout 2.53 - } 2.54 - } 2.55 -} 2.56 - 2.57 -Plugin { 2.58 - type = space 2.59 - Config { 2.60 - Size=2 2.61 - } 2.62 -} 2.63 - 2.64 -Plugin { 2.65 - type = launchbar 2.66 - Config { 2.67 - Button { 2.68 - id=/usr/share/applications/xterm.desktop 2.69 - } 2.70 - Button { 2.71 - id=/usr/share/applications/leafpad.desktop 2.72 - } 2.73 - Button { 2.74 - id=/usr/share/applications/tazweb.desktop 2.75 - } 2.76 - } 2.77 -} 2.78 - 2.79 -Plugin { 2.80 - type = space 2.81 - expand=1 2.82 - Config { 2.83 - Size=2 2.84 - } 2.85 -} 2.86 - 2.87 -Plugin { 2.88 - type = tray 2.89 -} 2.90 - 2.91 -Plugin { 2.92 - type = space 2.93 - Config { 2.94 - Size=4 2.95 - } 2.96 -} 2.97 - 2.98 -Plugin { 2.99 - type = volumealsa 2.100 -} 2.101 - 2.102 -Plugin { 2.103 - type = space 2.104 - Config { 2.105 - Size=8 2.106 - } 2.107 -} 2.108 - 2.109 -Plugin { 2.110 - type = netstatus 2.111 - Config { 2.112 - iface=wlan0 2.113 - configtool=subox netbox %i 2.114 - } 2.115 -} 2.116 - 2.117 -Plugin { 2.118 - type = space 2.119 - Config { 2.120 - Size=4 2.121 - } 2.122 -} 2.123 - 2.124 -Plugin { 2.125 - type = batt 2.126 - Config { 2.127 - HideIfNoBattery=0 2.128 - AlarmCommand=xmessage Battery low 2.129 - AlarmTime=5 2.130 - BackgroundColor=black 2.131 - BorderWidth=1 2.132 - ChargingColor1=#28f200 2.133 - ChargingColor2=#22cc00 2.134 - DischargingColor1=#ffee00 2.135 - DischargingColor2=#d9ca00 2.136 - Size=8 2.137 - } 2.138 -} 2.139 - 2.140 -Plugin { 2.141 - type = cpu 2.142 -} 2.143 - 2.144 -Plugin { 2.145 - type = space 2.146 - Config { 2.147 - Size=2 2.148 - } 2.149 -}
3.1 --- a/core/rootfs/etc/slitaz/tazpanel.conf Wed Jun 01 12:07:12 2011 +0200 3.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 3.3 @@ -1,34 +0,0 @@ 3.4 -# tazpanel.conf: SliTaz Web Control Panel configuration 3.5 -# 3.6 -# Copyright (C) 2011 SliTaz GNU/Linux - BSD License 3.7 -# 3.8 - 3.9 -# Panel location and theme 3.10 -PANEL="/var/www/tazpanel" 3.11 -STYLE="default" 3.12 - 3.13 -# Absolute path to images and xHTML skel from $PANEL 3.14 -IMAGES="/styles/$STYLE/images" 3.15 -HEADER="/styles/$STYLE/header.html" 3.16 -FOOTER="/styles/$STYLE/footer.html" 3.17 - 3.18 -# Display some debug messages 3.19 -DEBUG="0" 3.20 - 3.21 -# Activity log file 3.22 -LOG_FILE="/var/log/slitaz/tazpanel.log" 3.23 - 3.24 -# Terminal settings 3.25 -TERMINAL="xterm" 3.26 -TERM_OPTS="-geometry 80x16-0+24 -bg black -fg white" 3.27 - 3.28 -# Generic page loading message 3.29 -LOADING_MSG="Loading..." 3.30 - 3.31 -# Busybox HTTP daemon config 3.32 -HTTPD_CONF="/etc/slitaz/httpd.conf" 3.33 -HTTPD_PORT="82" 3.34 - 3.35 -# Shared Tazpkg paths 3.36 -LOCALSTATE="/var/lib/tazpkg" 3.37 -INSTALLED="$LOCALSTATE/installed"
4.1 --- a/core/rootfs/usr/bin/tazinst Wed Jun 01 12:07:12 2011 +0200 4.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 4.3 @@ -1,1248 +0,0 @@ 4.4 -#!/bin/sh 4.5 -# slitaz-installer - SliTaz GNU/Linux installer. 4.6 -# 4.7 -# So this is the SliTaz installer. The script starts with a 4.8 -# few main variables, then all the functions and then the 4.9 -# full sequence of functions. 4.10 -# 4.11 -# (C) 2007-2011 SliTaz - GNU General Public License v3. 4.12 -# 4.13 -# Authors : Christophe Lincoln <pankso@slitaz.org> 4.14 -# 4.15 - 4.16 -VERSION=2.99 4.17 - 4.18 -# 4.19 -SOURCE_ROOT=/media/source 4.20 -TARGET_ROOT=/mnt/target 4.21 -LOG=/var/log/tazinst.log 4.22 -BACKLIST="SliTaz GNU/Linux installer" 4.23 - 4.24 -# Default debug 4.25 -DEBUG=0 4.26 - 4.27 -# Mirror urls 4.28 -URL_STABLE="http://mirror.slitaz.org/iso/stable/slitaz-3.0.iso" 4.29 -URL_COOKING="http://mirror.slitaz.org/iso/cooking/slitaz-cooking.iso" 4.30 -URL_ROLLING="http://mirror.slitaz.org/iso/rolling/slitaz-core.iso" 4.31 - 4.32 -# Print a short help 4.33 -usage() 4.34 -{ 4.35 - echo -e "\n`gettext \"Tazinst - SliTaz installer - Version\"`: $VERSION\n" 4.36 - echo -e "\033[1m`gettext \"Usage\"`:" 4.37 - echo -e "\033[0m `gettext \"tazinst [command] [config-file|options]\n\"`" 4.38 - echo -e "\033[1m`gettext \"Commands\"`: \033[0m" 4.39 - echo -e "usage Print this short usage." 4.40 - echo -e "install Install SliTaz on HDD using a configuration file." 4.41 - echo -e "upgrade Upgrade SLiTaz on HDD using a configuration file." 4.42 - echo -e "config Generate a configuration file." 4.43 - echo -e "cli Install or upgrade using command line options:" 4.44 - echo -e " -i `gettext \"Full Install (not upgrading, all present data will be lost).\"`" 4.45 - echo -e " -u `gettext \"Upgrade (Needs an active internet connection).\"`" 4.46 - echo -e " -t <type> `gettext \"Install type (cdrom|usb|iso|web|weboot).\"`" 4.47 - echo -e " -m <source> `gettext \"Source media (ex: file.iso|usb partition|web url)\"`" 4.48 - echo -e " -p <partition> `gettext \"Partition where SliTaz will be installed (ex:/dev/hda3).\"`" 4.49 - echo -e " -f <fs> `gettext \"Partition will be formatted (fs=ext2|ext3|ext4|etc..).\"`" 4.50 - echo -e " -g `gettext \"Install Grub.\"`" 4.51 - echo -e " -w `gettext \"Dual-boot a Windows partition (auto|hd<disk>,<part> ex:hd0,0).\"`" 4.52 - echo -e " -d `gettext \"Debug mode.\"`" 4.53 - exit 0 4.54 -} 4.55 - 4.56 -# Print an error msg & exit 4.57 -# $1: exit code 4.58 -# $@: err msg 4.59 -abort() 4.60 -{ 4.61 - # unmouting source & target 4.62 - if mount | grep -q $SOURCE_ROOT; then 4.63 - umount $SOURCE_ROOT 2>>$LOG 4.64 - fi 4.65 - if mount | grep -q $TARGET_ROOT; then 4.66 - umount $TARGET_ROOT 2>>$LOG 4.67 - fi 4.68 - echo "Error $@" 4.69 - echo "Installation canceled" 4.70 - test $(id -u) = 0 && echo "Installation canceled on error $@" >> $LOG 4.71 - exit $1 4.72 -} 4.73 - 4.74 -# Print a warning msg 4.75 -warning() 4.76 -{ 4.77 - echo "Warning: $@" | tee -a $LOG 4.78 -} 4.79 - 4.80 -# Print a debug msg 4.81 -debug() 4.82 -{ 4.83 - [ $DEBUG -gt 0 ] && echo -e "\033[1mDEBUG: \033[0m$1" 4.84 - echo "DEBUG: $1" >>$LOG 4.85 -} 4.86 - 4.87 -# print a msg 4.88 -msg() 4.89 -{ 4.90 - STEP=$(($STEP+1)) 4.91 - echo "$STEP. $@" | tee -a $LOG 4.92 -} 4.93 - 4.94 -######################## 4.95 -# Gen-config functions # 4.96 -######################## 4.97 - 4.98 -# Generate a config file 4.99 -# $1: Configuration file 4.100 -gen_config() 4.101 -{ 4.102 - CONFILE=$1 4.103 - touch $CONFILE || error 1 "Unable to write $CONFILE" 4.104 - if [ -r "$CONFILE" ]; then 4.105 - cat > $CONFILE << _EOF_ 4.106 -# tazinst.conf: SliTaz Installer configuration file. 4.107 -# 4.108 - 4.109 -# Install type : [cdrom|usb|iso|web|weboot] 4.110 -INST_TYPE="cdrom" 4.111 - 4.112 -# Install source 4.113 -# usb:/dev/xxx, ex: SRC_FILE=/dev/sdb1 4.114 -# iso:file.iso, ex: SRC_FILE=~/slitaz.3.0.iso 4.115 -# web: url, ex: SRC_FILE=http://mirror.slitaz.org/iso/cooking/slitaz-cooking.iso 4.116 -# web: predefinites (stable|cooking|rolling), ex: SRC_FILE=cooking 4.117 -SRC_FILE="" 4.118 - 4.119 -# Install Target (Root Partition). 4.120 -TGT_PARTITION="/dev/hda5" 4.121 - 4.122 -# Target File system. 4.123 -# SliTaz uses ext3 by default but another filesystem can be used if wanted, 4.124 -# for this please adjust your /etc/fstab after installation. Valid options are: 4.125 -# (btrfs|ext2|ext3|ext4|fat16|fat32|hfs|hfs+|jfs|ntfs|reiser4|reiserfs|ufs|xfs) 4.126 -TGT_FS="ext3" 4.127 - 4.128 -# Home partition. 4.129 -# On most GNU/Linux systems users personal files are stored in the directory 4.130 -# /home. Home can be on a separate partition or another hard disk. 4.131 -TGT_HOME="" 4.132 -# Home File system (if /home is on a separate partition) 4.133 -TGT_HOME_FS="" 4.134 - 4.135 -# Hostname 4.136 -TGT_HOSTNAME="slitaz" 4.137 - 4.138 -# roor password 4.139 -# The root administrator privilege lets you manage and configure the full 4.140 -# system. A root user can damage your system so you should always setup a 4.141 -# strong password with special characters and/or numbers. 4.142 -TGT_ROOT_PWD="root" 4.143 - 4.144 -# The default user for the system will have his personal files stored 4.145 -# in /home/*user* (and will be automatically added to the audio group). 4.146 -TGT_USER="tux" 4.147 -TGT_USER_PWD="" 4.148 - 4.149 -# Grub bootloader 4.150 -# install grub [yes|no] 4.151 -TGT_GRUB="no" 4.152 -# Where to find menu.lst (dedicated grub part. or multi-os install) 4.153 -# If you don't know what to do, it's safe to leave it blank 4.154 -TGT_MENU_PARTITION="" 4.155 - 4.156 -# Windows dual-boot 4.157 -# Dual boot is disabled if WINBOOT is empty: TGT_WINBOOT="" 4.158 -# You may let tazinst find your win partition, mode=auto: TGT_WINBOOT="auto" 4.159 -# or set manual setting: "hd[disk],[partition]" ex:TGT_WINBOOT=hd0,0 4.160 -TGT_WINBOOT="" 4.161 - 4.162 -_EOF_ 4.163 - 4.164 - else 4.165 - abort 2 "Configuration file $CONFILE not found" 4.166 - fi 4.167 - 4.168 -} 4.169 - 4.170 -###################### 4.171 -# Checking functions # 4.172 -###################### 4.173 - 4.174 - 4.175 -# def values and start log 4.176 -# $@ : 4.177 -init() 4.178 -{ 4.179 - echo "=== Tazinst start at `date` ===" >$LOG 4.180 - echo "Command: $0 $@" >>$LOG 4.181 - 4.182 - # Default Type 4.183 - INST_TYPE=cdrom 4.184 - # Default Hostname. 4.185 - TGT_HOSTNAME=slitaz 4.186 - # Default root passwd 4.187 - TGT_ROOT_PWD=root 4.188 - # Default user 4.189 - TGT_USER=tux 4.190 - # Default Grub Install 4.191 - TGT_GRUB=no 4.192 -} 4.193 - 4.194 -# Read Conf 4.195 -# $1: conf file 4.196 -read_configuration_file() 4.197 -{ 4.198 - CONFILE=$1 4.199 - if [ -n "$CONFILE" ]; then 4.200 - if [ -r "$CONFILE" ]; then 4.201 - debug "Using config-file=$CONFILE" 4.202 - # source doesn't like file without a path 4.203 - [ $(echo "$CONFILE" | grep -c "/") == "0" ] && CONFILE="./$CONFILE" 4.204 - source $CONFILE || abort 2 "Unable to read $CONFILE" 4.205 - else 4.206 - abort 2 "Configuration file not found" 4.207 - fi 4.208 - else 4.209 - abort 2 "No configuration file provided" 4.210 - fi 4.211 -} 4.212 - 4.213 -# Cli options 4.214 -# $@: tazinst parms 4.215 -check_cli_options() 4.216 -{ 4.217 - shift 4.218 - while getopts "c:df:ghip:s:t:uw:" opt ; do 4.219 - case $opt in 4.220 - d) DEBUG=1 ;; 4.221 - f) TGT_FS=$OPTARG ;; 4.222 - g) TGT_GRUB="yes" ;; 4.223 - h) usage ;; 4.224 - i) INSTALL="install" ;; 4.225 - p) TGT_PARTITION=$OPTARG ;; 4.226 - s) SRC_FILE=$OPTARG ;; 4.227 - t) INST_TYPE=$OPTARG ;; 4.228 - u) UPGRADE="upgrade" ;; 4.229 - w) TGT_WINBOOT=$OPTARG ;; 4.230 - [?]) abort 1 ;; 4.231 - esac 4.232 - done 4.233 - 4.234 - # Duplicate install modes are forbidden 4.235 - [ -n "$INSTALL" ] && [ -n "$UPGRADE" ] && abort 1 "Mismatched parameters" 4.236 - INST_ACTION="$INSTALL$UPGRADE" 4.237 - # Don't allow formatting on upgrades 4.238 - [ "$INST_ACTION" == "upgrade" ] && [ -n "$TGT_FS" ] && \ 4.239 - warning "Partition $TGT_PARTITION will not be formatted during upgrade" 4.240 -} 4.241 - 4.242 -# check main vars 4.243 -check_vars() 4.244 -{ 4.245 - # error handling 4.246 - local error=no 4.247 - local found=no 4.248 - local partition="" 4.249 - 4.250 - debug "--- Tazinst main options ---" 4.251 - debug "action=$INST_ACTION" 4.252 - debug "type=$INST_TYPE" 4.253 - debug "source=$SRC_FILE" 4.254 - debug "/ partition=$TGT_PARTITION" 4.255 - debug "/ filesystem=$TGT_FS" 4.256 - debug "/home partition=$TGT_HOME" 4.257 - debug "/home filesystem=$TGT_HOME_FS" 4.258 - debug "hostname=$TGT_HOSTNAME" 4.259 - debug "root-pwd=$TGT_ROOT_PWD" 4.260 - debug "user=$TGT_USER" 4.261 - debug "user-pwd=$TGT_USER_PWD" 4.262 - debug "grub=$TGT_GRUB" 4.263 - debug "winboot=$TGT_WINBOOT" 4.264 - debug "--------------------------------------" 4.265 - 4.266 - # Check Action 4.267 - case $INST_ACTION in 4.268 - install|upgrade) ;; 4.269 - *) msg "INST_ACTION=$INST_ACTION: Invalid setting"; error=yes ;; 4.270 - esac 4.271 - 4.272 - # Check Type 4.273 - case $INST_TYPE in 4.274 - cdrom|weboot) ;; 4.275 - usb|iso|web) 4.276 - # We need a valid source 4.277 - if [ -z "$SRC_FILE" ]; then 4.278 - echo "Type is $INST_TYPE, but INST_SOURCE is not set"; error=yes 4.279 - fi ;; 4.280 - *) msg "INST_TYPE=$INST_TYPE: Invalid setting"; error=yes ;; 4.281 - esac 4.282 - 4.283 - # Check Source file 4.284 - # 1. assign predefs 4.285 - if [ "$INST_TYPE" == "web" ]; then 4.286 - [ "$SRC_FILE" == "stable" ] && SRC_FILE=$URL_STABLE 4.287 - [ "$SRC_FILE" == "cooking" ] && SRC_FILE=$URL_COOKING 4.288 - [ "$SRC_FILE" == "rolling" ] && SRC_FILE=$URL_ROLLING 4.289 - fi 4.290 - # 2. check avail. 4.291 - case $INST_TYPE in 4.292 - iso) 4.293 - if [ ! -r "$SRC_FILE" ]; then 4.294 - msg "SRC_FILE=$SRC_FILE: file not found" ; error=yes 4.295 - fi ;; 4.296 - web) 4.297 - if [ $(wget -sq "$SRC_FILE") ]; then 4.298 - msg "SRC_FILE=$SRC_FILE: file not found" ; error=yes 4.299 - fi ;; 4.300 - esac 4.301 - 4.302 - # Check Target Partition 4.303 - found=no 4.304 - LIST_PARTITION=$(fdisk -l | awk '/^\/dev/{printf "%s ",$1}') 4.305 - for partition in $LIST_PARTITION; do 4.306 - [ "$partition" == "$TGT_PARTITION" ] && found="yes" 4.307 - done 4.308 - if [ "$found" != "yes" ]; then 4.309 - msg "TGT_PARTITION=$TGT_PARTITION Partition not found"; error=yes 4.310 - fi 4.311 - 4.312 - # Check Filesystem 4.313 - case $TGT_FS in 4.314 - "") ;; 4.315 - btrfs|ext2|ext3|ext4|fat16|fat32|hfs|hfs+|jfs|ntfs|reiser4|reiserfs|ufs|xfs) 4.316 - found=no 4.317 - for xdir in /sbin /usr/sbin /usr/bin; do 4.318 - [ -x "$xdir/mkfs.$TGT_FS" ] && found=yes 4.319 - done 4.320 - if [ "$found" == "no" ]; then 4.321 - msg "$TGT_FS: mkfs.$TGT_FS is not installed."; error=yes 4.322 - fi ;; 4.323 - *) msg "TGT_FS=$TGT_FS: Invalid setting"; error=yes ;; 4.324 - esac 4.325 - 4.326 - # Check Home partition 4.327 - if [ -n "$TGT_HOME" ]; then 4.328 - found=no 4.329 - for partition in $LIST_PARTITION; do 4.330 - [ "$partition" == "$TGT_HOME" ] && found=yes 4.331 - done 4.332 - if [ "$found" != "yes" ]; then 4.333 - msg "TGT_HOME=$TGT_HOME: Not found"; error=yes 4.334 - fi 4.335 - fi 4.336 - 4.337 - # Check Home Filesystem 4.338 - case $TGT_HOME_FS in 4.339 - "") ;; 4.340 - btrfs|ext2|ext3|ext4|fat16|fat32|hfs|hfs+|jfs|ntfs|reiser4|reiserfs|ufs|xfs) 4.341 - found=no 4.342 - for xdir in /sbin /usr/sbin /usr/bin; do 4.343 - [ -x "$xdir/mkfs.$TGT_FS" ] && found=yes 4.344 - done 4.345 - if [ "$found" == "no" ]; then 4.346 - msg "$TGT_FS: mkfs.$TGT_FS is not installed."; error=yes 4.347 - fi ;; 4.348 - *) msg "TGT_HOME_FS=$TGT_HOME_FS: Invalid setting"; error=yes ;; 4.349 - esac 4.350 - 4.351 - # Check Grub 4.352 - case $TGT_GRUB in 4.353 - yes|no) ;; 4.354 - *) msg "TGT_GRUB=$TGT_GRUB: Invalid setting"; error=yes ;; 4.355 - esac 4.356 - 4.357 - # Check Winboot 4.358 - case $TGT_WINBOOT in 4.359 - "") ;; 4.360 - auto) ;; 4.361 - hd[[:digit:]],[[:digit:]]) ;; 4.362 - *) msg "TGT_WINBOOT=$TGT_WINBOOT: Invalid format"; error=yes ;; 4.363 - esac 4.364 - 4.365 - # Stop on error 4.366 - [ "$error" == "yes" ] && abort 1 4.367 -} 4.368 - 4.369 -# Exit install if user is not root. 4.370 -check_root() 4.371 -{ 4.372 - if test $(id -u) != 0 ; then 4.373 - echo "You must be the root user (system administrator) to install SliTaz, \ 4.374 -please use 'su' to get a root SHell and restart installation." 4.375 - exit 0 4.376 - fi 4.377 -} 4.378 - 4.379 -# Mount cdrom 4.380 -check_cdrom() 4.381 -{ 4.382 - # Set device name 4.383 - DRIVE_NAME=`cat /proc/sys/dev/cdrom/info | grep "drive name" | cut -f 3` [ -n "$DRIVE_NAME" ] || DRIVE_NAME=cdrom 4.384 - CDROM=/dev/$DRIVE_NAME 4.385 - # Try to mount a cdrom 4.386 - if mount -t iso9660 $CDROM $SOURCE_ROOT 2>>$LOG; then 4.387 - debug "Using files from cdrom ($CDROM)..." 4.388 - sleep 2 4.389 - else 4.390 - warning "Failed to mount $CDROM" 4.391 - fi 4.392 -} 4.393 - 4.394 -# Link LiveUSB 4.395 -check_usb() 4.396 -{ 4.397 - # /home is on USB dev 4.398 - if [ -d /home/boot ]; then 4.399 - debug "Using files from USB device..." 4.400 - ln -s /home/boot $SOURCE_ROOT/boot 4.401 - SOURCE_STATUS="link" 4.402 - sleep 2 4.403 - else 4.404 - # Try to mount LiveUSB 4.405 - if mount $SRC_FILE $SOURCE_ROOT 2>>$LOG; then 4.406 - debug "Using files from USB device ($SRC_FILE)..." 4.407 - SOURCE_STATUS="mount" 4.408 - else 4.409 - warning "Failed to mount USB device $SRC_FILE" 4.410 - fi 4.411 - fi 4.412 -} 4.413 - 4.414 -# Mount ISO file 4.415 -check_iso() 4.416 -{ 4.417 - local src_md5 4.418 - # Integrity check 4.419 - src_md5=$(echo $SRC_FILE | sed 's/.iso$/.md5/') 4.420 - if [ -r "$src_md5" ]; then 4.421 - [ $(md5sum $SRC_FILE | cut -d' ' -f1) == $(cat "$src_md5" | cut -d' ' -f1) ] || \ 4.422 - abort 3 "$SRC-FILE corrupted" 4.423 - else 4.424 - warning "$src_md5 not found, unable to check integrity of $SRC_FILE" 4.425 - fi 4.426 - # Try to mount ISO 4.427 - if mount -o loop -t iso9660 $SRC_FILE $SOURCE_ROOT 2>>$LOG; then 4.428 - debug "Using files from ISO ($SRC_FILE)..." 4.429 - sleep 2 4.430 - else 4.431 - warning "Failed to mount ISO '$SRC_FILE'" 4.432 - fi 4.433 -} 4.434 - 4.435 -# Source is on the web 4.436 -check_web() 4.437 -{ 4.438 - local src_md5 4.439 - debug "Downloading $SRC_FILE" 4.440 - if wget $SRC_FILE -P /tmp; then 4.441 - debug "Download completed." 4.442 - else 4.443 - warning "Failed to download '$SRC_FILE'" 4.444 - fi 4.445 - src_md5=$(echo $SRC_FILE | sed 's/.iso$/.md5/') 4.446 - debug "Downloading $src_md5" 4.447 - wget $src_md5 -P /tmp || warning "Failed to download '$src_md5'" 4.448 - tmpfile=$(echo $SRC_FILE | awk 'BEGIN{RS="/"}{out=$1}END{printf"%s",out}') 4.449 - SRC_FILE="/tmp/$tmpfile" 4.450 - check_iso 4.451 -} 4.452 - 4.453 -# We may be in Tiny Web boot mode 4.454 -check_weboot() 4.455 -{ 4.456 - if [ -d $SRC_FILE/boot ]; then 4.457 - debug "Using files from HTTP device..." 4.458 - ln -s $SRC_FILE/boot $SOURCE_ROOT/boot 4.459 - sleep 2 4.460 - else 4.461 - abort 3 "Error: Web boot files not found" 4.462 - fi 4.463 -} 4.464 - 4.465 -# set up source and check Slitaz' content 4.466 -check_source() 4.467 -{ 4.468 - debug "Creating mount point ($SOURCE_ROOT)..." 4.469 - mkdir -p $SOURCE_ROOT 4.470 - sleep 1 4.471 - case $INST_TYPE in 4.472 - cdrom) 4.473 - check_cdrom ;; 4.474 - usb) 4.475 - check_usb ;; 4.476 - iso) 4.477 - check_iso ;; 4.478 - web) 4.479 - check_web ;; 4.480 - weboot) 4.481 - check_cdrom 4.482 - check_web ;; 4.483 - *) 4.484 - abort 8 "Internal" ;; 4.485 - esac 4.486 - 4.487 - # Exit with error msg if no rootfs.gz found. 4.488 - debug "Checking installation media..." 4.489 - if [ ! -f $SOURCE_ROOT/boot/rootfs.gz -a \ 4.490 - ! -f $SOURCE_ROOT/boot/rootfs1.gz ]; then 4.491 - abort 3 "Invalid source" 4.492 - else 4.493 - debug "Installation media checked ok" 4.494 - fi 4.495 -} 4.496 - 4.497 -# Tiny summary 4.498 -summary() 4.499 -{ 4.500 - echo "Installation settings summary:" 4.501 - STEP=0 4.502 - 4.503 - if [ "$INST_ACTION" == "install" ]; then 4.504 - if [ -n "$TGT_FS" ]; then 4.505 - msg "Format root partition '$TGT_PARTITION' ($TGT_FS)" 4.506 - fi 4.507 - if [ -n "$TGT_HOME_FS" ]; then 4.508 - msg "Format /home partition '$TGT_HOME' ($TGT_HOME_FS)" 4.509 - fi 4.510 - msg "Install SliTaz on '$TGT_PARTITION' from $INST_TYPE" 4.511 - [ -n "$TGT_HOME" ] && msg "Set Home partition to '$TGT_HOME'" 4.512 - msg "Set Hostname as '$TGT_HOSTNAME'" 4.513 - msg "Set Default user as '$TGT_USER'" 4.514 - else 4.515 - msg "Check '$TGT_PARTITION'" 4.516 - msg "Backup /etc, /home and the packages list" 4.517 - msg "Upgrade SliTaz on '$TGT_PARTITION' from $INST_TYPE" 4.518 - msg "Restore /etc, /home" 4.519 - msg "Upgrade additional packages." 4.520 - fi 4.521 - if [ -n "$TGT_WINBOOT" ]; then 4.522 - msg "Enable Windows dual-boot ($TGT_WINBOOT)" 4.523 - fi 4.524 - if [ "$TGT_GRUB" == "yes" ]; then 4.525 - msg "Install Grub" 4.526 - fi 4.527 - 4.528 - echo -n "Continue:(y/n)" 4.529 - read answer 4.530 - case $answer in 4.531 - [yY]) echo "Running $BACKLIST.." ;; 4.532 - *) abort 4 "Cancelled by user" ;; 4.533 - esac 4.534 - STEP=0 4.535 -} 4.536 - 4.537 -####################### 4.538 -# Installer functions # 4.539 -####################### 4.540 - 4.541 -# Mount and mkfs with progress. 4.542 -prepare_install() 4.543 -{ 4.544 - debug "Preparing target partition..." 4.545 - # Mount point can be already used. 4.546 - if mount | grep -q $TARGET_ROOT; then 4.547 - umount $TARGET_ROOT 2>>$LOG 4.548 - fi 4.549 - sleep 2 4.550 - 4.551 - # Formatting root partition 4.552 - case $TGT_FS in 4.553 - "") 4.554 - debug "The partition ($TGT_PARTITION) will be cleaned..." 4.555 -# ROOT_FS=$(parted /dev/hda5 print -m | grep "^1:" | cut -d':' -f5) ;; 4.556 - ROOT_FS=auto ;; 4.557 - *) 4.558 - msg "Formatting $TGT_PARTITION ($TGT_FS)" 4.559 - mkfs.$TGT_FS $TGT_PARTITION >>$LOG 2>>$LOG 4.560 - ROOT_FS=$TGT_FS ;; 4.561 - esac 4.562 - sleep 2 4.563 - 4.564 - # Formatting /home 4.565 - if [ -n "$TGT_HOME" ]; then 4.566 - case $TGT_HOME_FS in 4.567 - "") 4.568 - debug "The partition ($TGT_HOME) will be kept..." ;; 4.569 - *) 4.570 - msg "Formatting /home on $TGT_HOME ($TGT_HOME_FS)" 4.571 - mkfs.$TGT_HOME_FS -L "Home" $TGT_HOME >>$LOG 2>>$LOG ;; 4.572 - esac 4.573 - sleep 2 4.574 - fi 4.575 - 4.576 - # Mount target. 4.577 - debug "Creating mount point: $TARGET_ROOT" 4.578 - mkdir -p $TARGET_ROOT >>$LOG 4.579 - sleep 2 4.580 - 4.581 - mount -t $ROOT_FS $TGT_PARTITION $TARGET_ROOT >>$LOG 2>>$LOG 4.582 - if [ $(mount | grep -c "mnt/target") == "0" ]; then 4.583 - abort 5 "Can't mount $TGT_PARTITION" 4.584 - fi 4.585 -} 4.586 - 4.587 -# Get a clean target device (15%). 4.588 -clean_target() 4.589 -{ 4.590 - if [ -z "$TGT_FS" ]; then 4.591 - # partition was not formatted 4.592 - debug "Cleaning the root partition ($TGT_PARTITION)..." 4.593 - # Keep /home in case of reinstall. 4.594 - cd $TARGET_ROOT || abort 8 "Internal" 4.595 - for dir in * 4.596 - do 4.597 - case "$dir" in 4.598 - home) 4.599 - debug "keeping /home found on: $TGT_PARTITION" 4.600 - mv home home.bak ;; 4.601 - lost+found) 4.602 - continue ;; 4.603 - *) 4.604 - debug "removing target: $dir" 4.605 - rm -rf $dir 2>>$LOG ;; 4.606 - esac 4.607 - done 4.608 - if [ -d mklost+found ]; then 4.609 - mklost+found 2>>$LOG 4.610 - fi 4.611 - fi 4.612 - sleep 2 4.613 -} 4.614 - 4.615 -# Kernel is renamed to standard vmlinuz-$VERSION. 4.616 -install_kernel() 4.617 -{ 4.618 - if [ -d /$TARGET_ROOT/lib/modules ]; then 4.619 - KERNEL=$(ls /$TARGET_ROOT/lib/modules | tail -1) 4.620 - KERNEL="vmlinuz-$KERNEL" 4.621 - else 4.622 - warning "Falling back to running kernel name.." 4.623 - KERNEL=vmlinuz-`uname -r` 4.624 - fi 4.625 - mkdir -p $TARGET_ROOT/boot 4.626 - cp $SOURCE_ROOT/boot/bzImage $TARGET_ROOT/boot/$KERNEL 4.627 - debug "install_kernel: $KERNEL" 4.628 - sleep 2 4.629 -} 4.630 - 4.631 -# Copy isolinux r/w files (not syslinux, some files are read only). 4.632 -copy_bootloaders() 4.633 -{ 4.634 - if [ -d "$SOURCE/ROOT/boot/isolinux" ]; then 4.635 - debug "Copy isolinux r/w files" 4.636 - mkdir -p $TARGET_ROOT/boot/isolinux 4.637 - cp -a $SOURCE_ROOT/boot/isolinux/*.cfg $TARGET_ROOT/boot/isolinux 4.638 - cp -a $SOURCE_ROOT/boot/isolinux/*.kbd $TARGET_ROOT/boot/isolinux 4.639 - cp -a $SOURCE_ROOT/boot/isolinux/*.txt $TARGET_ROOT/boot/isolinux 4.640 - cp -a $SOURCE_ROOT/boot/isolinux/*.bin $TARGET_ROOT/boot/isolinux 4.641 - cp -a $SOURCE_ROOT/boot/isolinux/*.msg $TARGET_ROOT/boot/isolinux 4.642 - cp -a $SOURCE_ROOT/boot/isolinux/*.lss $TARGET_ROOT/boot/isolinux 4.643 - cp -a $SOURCE_ROOT/boot/isolinux/*.c32 $TARGET_ROOT/boot/isolinux 4.644 - fi 4.645 -} 4.646 - 4.647 -need_package() 4.648 -{ 4.649 - [ -d /var/lib/tazpkg/installed/$1 ] || tazpkg get-install $1 4.650 -} 4.651 - 4.652 -# extract packed rootfs: squashfs or cromfs 4.653 -extract_loramfs() 4.654 -{ 4.655 - local i 4.656 - for i in $(cpio -idvum 2> /dev/null); do 4.657 - case "$i" in 4.658 - rootfs*) 4.659 - need_package squashfs 4.660 - if ! unsquashfs $i ; then 4.661 - need_package cromfs 4.662 - unmkcromfs $i squashfs-root 4.663 - fi 4.664 - mv -f squashfs-root/* . 4.665 - rmdir squashfs-root 4.666 - rm -f $i 4.667 - esac 4.668 - done 4.669 -} 4.670 - 4.671 -# This is a loram rootfs.gz, skip loram bootstrap and extract 4.672 -extract_first_loramfs() 4.673 -{ 4.674 - (zcat $1 || unlzma -c $1) | cpio -i extractfs.cpio 2> /dev/null && 4.675 - ( cd / ; cpio -id ) < extractfs.cpio && rm -f extractfs.cpio 4.676 - ofs=$(awk '/07070100/ { o+=index($0,"07070100"); printf "%d\n",o/4 ; exit } { o+=1+length() }' < $1) 4.677 - dd if=$1 skip=$(($ofs / 1024)) bs=4k count=1 2> /dev/null | \ 4.678 - ( dd skip=$(($ofs % 1024)) bs=4 2> /dev/null ; \ 4.679 - dd if=$1 skip=$((1 + ($ofs / 1024) )) bs=4k ) | extract_loramfs 4.680 -} 4.681 - 4.682 -# Extract lzma'ed or gziped rootfs. 4.683 -extract_rootfs() 4.684 -{ 4.685 - local isloramfs 4.686 - isloramfs= 4.687 - cd $TARGET_ROOT || abort 8 "Internal" 4.688 - if [ -d $1/../fs/etc ]; then 4.689 - # This is a tazlitobox loram (cdrom) 4.690 - cp -a $1/../fs/. . 4.691 - else 4.692 - for i in $(ls $1/rootfs* | sort -r); do 4.693 - if [ ! -d etc ]; then 4.694 - if [ $( (zcat $i 2>/dev/null || lzma d $i -so) | wc -c) \ 4.695 - -lt $(stat -c %s $i) ]; then 4.696 - # This is a tazlitobox loram (ram) 4.697 - isloramfs=$i 4.698 - extract_first_loramfs $i 4.699 - continue 4.700 - fi 4.701 - fi 4.702 - if [ -n "$isloramfs" ]; then 4.703 - extract_loramfs < $i 4.704 - continue 4.705 - fi 4.706 - ( zcat $i 2>/dev/null || lzma d $i -so || \ 4.707 - cat $i ) 2>>$LOG | cpio -idu 4.708 - done 2>>$LOG > /dev/null 4.709 - fi 4.710 - cp /etc/keymap.conf etc 4.711 - # unpack /usr (double check...) 4.712 - if ls etc/tazlito | grep -q ".extract"; then 4.713 - for i in etc/tazlito/*.extract; do 4.714 - [ -f "$i" ] && . $i /media/cdrom 4.715 - done 4.716 - fi 4.717 -} 4.718 - 4.719 -# Pre configure freshly installed system (60 - 80%). 4.720 -pre_config_system() 4.721 -{ 4.722 - cd $TARGET_ROOT || abort 8 "Internal" 4.723 - # Restore backup of existing /home if exists. 4.724 - # (created by prepare_target_dev) 4.725 - if [ -d home.bak ]; then 4.726 - debug "Restoring directory: /home..." 4.727 - rm -rf home 4.728 - mv home.bak home 4.729 - sleep 1 4.730 - fi 4.731 - # Add root device to CHECK_FS in rcS.conf to check filesystem 4.732 - # on each boot. 4.733 - debug "Adding $TGT_PARTITION and CHECK_FS to file /etc/rcS.conf..." 4.734 - sed -i s#'CHECK_FS=\"\"'#"CHECK_FS=\"$TGT_PARTITION\""# etc/rcS.conf 4.735 - sleep 2 4.736 - # Set hostname. 4.737 - msg "Configuring host name: $TGT_HOSTNAME" 4.738 - echo $TGT_HOSTNAME > etc/hostname 4.739 -} 4.740 - 4.741 -# Set root passwd and create user after rootfs extraction. 4.742 -users_settings() 4.743 -{ 4.744 - cat > $TARGET_ROOT/users.sh << _EOF_ 4.745 -#!/bin/sh 4.746 -echo "root:$TGT_ROOT_PWD" | chpasswd 4.747 -adduser -D -H $TGT_USER 4.748 - 4.749 -for grp in audio cdrom floppy dialout disk kmem tape tty video; do 4.750 - if ! grep \$grp /etc/group | grep -q $TGT_USER ; then 4.751 - grep -q \$grp /etc/group && addgroup $TGT_USER \$grp 4.752 - fi 4.753 -done 4.754 - 4.755 -echo "$TGT_USER:$TGT_USER_PWD" | chpasswd 4.756 -if [ ! -d /home/$TGT_USER ]; then 4.757 - cp -a /etc/skel /home/$TGT_USER 4.758 - cp /root/.xinitrc /home/$TGT_USER 4.759 - mkdir -p /home/$TGT_USER/.config/slitaz 4.760 - cp -a /etc/slitaz/applications.conf /home/$TGT_USER/.config/slitaz 4.761 - chown -R $TGT_USER.users /home/$TGT_USER 4.762 - # Path for user desktop files. 4.763 - for i in /home/$TGT_USER/.local/share/applications/*.desktop 4.764 - do 4.765 - [ -e "$i" ] && sed -i s/"user_name"/"$TGT_USER"/g \$i 4.766 - done 4.767 -fi 4.768 -# Slim default user. 4.769 -if [ -f /etc/slim.conf ]; then 4.770 - sed -i s/"default_user .*"/"default_user $TGT_USER"/ \ 4.771 - /etc/slim.conf 4.772 -fi 4.773 -_EOF_ 4.774 - chmod +x $TARGET_ROOT/users.sh 4.775 - chroot $TARGET_ROOT ./users.sh 4.776 - rm $TARGET_ROOT/users.sh 4.777 - sleep 2 4.778 -} 4.779 - 4.780 -# /home can be on a separate partition. If default user exist in /home 4.781 -# we remove default file crated by users_settings(). 4.782 -home_config() 4.783 -{ 4.784 - debug "home_config: $TGT_HOME" 4.785 - cd $TARGET_ROOT || abort 8 "Internal" 4.786 - mv home/$TGT_USER tmp 4.787 - mount $TGT_HOME home 4.788 - if [ -d $TARGET_ROOT/home/$TGTUSER ]; then 4.789 - rm -rf tmp/$TGT_USER 4.790 - else 4.791 - mv tmp/$TGT_USER home 4.792 - fi 4.793 - echo "$TGT_HOME /home ext3 defaults 0 2" \ 4.794 - >> etc/fstab 4.795 - umount home 4.796 -} 4.797 - 4.798 -# Search for a Windows partition 4.799 -win_partition() 4.800 -{ 4.801 - msg "Enabling Windows dual-boot" 4.802 - if [ "$TGT_WINBOOT" == "auto" ];then 4.803 - WINBOOT=$(fdisk -l | awk ' 4.804 -BEGIN{disk=-1, found=-1, winboot=""} 4.805 -{ 4.806 - # Counting disk 4.807 - if ($1=="Disk"){disk++, part=-1} 4.808 - # Counting partition 4.809 - if (substr($1,1,4)=="/dev"){part++} 4.810 - # Read partition Id 4.811 - if ($2=="*"){Id=$6} else {Id=$5} 4.812 - # Detect Windows type 4.813 - if (Id=="7" || Id=="b"){ 4.814 - if (found){ 4.815 - # record 1st Windows partition found 4.816 - winboot=sprintf("hd%d,%d",disk,part),found++} 4.817 - } 4.818 -} 4.819 -END{printf "%s", winboot}') 4.820 - if [ -z "$WINBOOT" ]; then 4.821 - warning "No windows partition found. Dual-boot disabled" 4.822 - TGT_WINBOOT="" 4.823 - fi 4.824 - fi 4.825 -} 4.826 - 4.827 -# Determine GRUB partition number and GRUB disk number. 4.828 -grub_partition() 4.829 -{ 4.830 - DISK_LETTER=${TGT_PARTITION#/dev/[h-s]d} 4.831 - DISK_LETTER=${DISK_LETTER%[0-9]} 4.832 - GRUB_PARTITION=$((${TGT_PARTITION#/dev/[h-s]d[a-z]}-1)) 4.833 - for disk in a b c d e f g h 4.834 - do 4.835 - nb=$(($nb+1)) 4.836 - if [ "$disk" = "$DISK_LETTER" ]; then 4.837 - GRUB_DISK=$(($nb-1)) 4.838 - break 4.839 - fi 4.840 - done 4.841 - GRUB_ROOT="(hd${GRUB_DISK},${GRUB_PARTITION})" 4.842 -} 4.843 - 4.844 -# Create grub conf 4.845 -grub_config() 4.846 -{ 4.847 - grub_partition 4.848 - win_partition 4.849 - # Create the target GRUB configuration. 4.850 - mkdir -p $TARGET_ROOT/boot/grub 4.851 - . /etc/locale.conf 4.852 - cat > $TARGET_ROOT/boot/grub/menu.lst << _EOF_ 4.853 -# /boot/grub/menu.lst: GRUB boot loader configuration. 4.854 -# 4.855 - 4.856 -# By default, boot the first entry. 4.857 -default 0 4.858 - 4.859 -# Boot automatically after 8 secs. 4.860 -timeout 8 4.861 - 4.862 -# Graphical splash image. 4.863 -splashimage=/boot/grub/splash.xpm.gz 4.864 - 4.865 -# Change the colors. 4.866 -#color yellow/brown light-green/black 4.867 - 4.868 -# For booting SliTaz from : $TGT_PARTITION 4.869 -# 4.870 -title SliTaz GNU/Linux (cooking) (Kernel $KERNEL) 4.871 -root $GRUB_ROOT 4.872 -kernel /boot/$KERNEL root=$TGT_PARTITION lang=$LANG 4.873 - 4.874 -_EOF_ 4.875 - if [ -n "$TGT_WINBOOT" ]; then 4.876 - cat >> $TARGET_ROOT/boot/grub/menu.lst << _EOF_ 4.877 -# For booting Windows : 4.878 -# 4.879 -title Microsoft Windows 4.880 - rootnoverify ($WINBOOT) 4.881 - chainloader +1 4.882 - 4.883 -_EOF_ 4.884 - fi 4.885 - # log 4.886 - debug "grub_config: $TARGET_ROOT/boot/grub/menu.lst" 4.887 - echo "--- menu.lst -------------" >>$LOG 4.888 - cat $TARGET_ROOT/boot/grub/menu.lst >>$LOG 4.889 - echo "--- menu.lst -------------" >>$LOG 4.890 - sleep 2 4.891 -} 4.892 - 4.893 -# Files install, calling for functions or with cmds. 4.894 -install_files() 4.895 -{ 4.896 - msg "Installing SliTaz on $TGT_PARTITION" 4.897 - # saving pwd 4.898 - local save_pwd=$(pwd) 4.899 - 4.900 - debug "Cleaning the root partition if necessary..." 4.901 - clean_target 4.902 - 4.903 - debug "Extracting the root system..." 4.904 - extract_rootfs $SOURCE_ROOT/boot 4.905 - 4.906 - debug "Installing the kernel..." 4.907 - install_kernel 4.908 - 4.909 - debug "Copying the bootloader syslinux/isolinux..." 4.910 - copy_bootloaders 4.911 - 4.912 - debug "Preconfiguring the system..." 4.913 - pre_config_system 4.914 - 4.915 - msg "Configuring root and default $USER account..." 4.916 - users_settings 4.917 - 4.918 - if [ "$TGT_HOME" != "" ]; then 4.919 - msg "Configuring $TGT_HOME to be used as /home..." 4.920 - home_config 4.921 - sleep 2 4.922 - fi 4.923 - 4.924 - debug "Creating configuration file for GRUB (menu.lst)..." 4.925 - grub_config 4.926 - 4.927 - debug "Files installation completed" 4.928 - sleep 2 4.929 - # restoring pwd 4.930 - cd $save_pwd 4.931 -} 4.932 - 4.933 -# GRUB info with disk name used for grub-install. 4.934 -grub_install() 4.935 -{ 4.936 - if [ "$TGT_GRUB" == "yes" ]; then 4.937 - TARGET_DISK=`echo $TGT_PARTITION | sed s/"[0-9]"/''/` 4.938 - msg "Running grub-install on : $TARGET_DISK" 4.939 - grub-install --no-floppy \ 4.940 - --root-directory=$TARGET_ROOT $TARGET_DISK 2>>$LOG 4.941 - debug "Grub installation done..." 4.942 - else 4.943 - debug "Grub not installed" 4.944 - fi 4.945 -} 4.946 - 4.947 -# Copy log file, umount target and eject cdrom. 4.948 -umount_devices() 4.949 -{ 4.950 - # Log files 4.951 - debug "Copying log files ($LOG)..." 4.952 - cp -a $LOG $TARGET_ROOT/var/log 4.953 - sleep 2 4.954 - 4.955 - # Umount target 4.956 - if mount | grep -q $TARGET_ROOT; then 4.957 - echo "Unmounting target ($TGT_PARTITION)..." 4.958 - umount $TARGET_ROOT 2>>$LOG 4.959 - fi 4.960 - 4.961 - # Umount source 4.962 - if mount | grep -q $SOURCE_ROOT; then 4.963 - echo "Unmounting $SOURCE_ROOT" 4.964 - umount $SOURCE_ROOT 4.965 - fi 4.966 - 4.967 - # Eject cd 4.968 - if [ "$INST_TYPE" == "cdrom" ]; then 4.969 - echo "Ejecting cdrom..." 4.970 - eject 4.971 - fi 4.972 - sleep 2 4.973 -} 4.974 - 4.975 -# End of installation. 4.976 -end_of_install() 4.977 -{ 4.978 - echo "Installation complete. You can now restart (reboot) \ 4.979 -from your SliTaz GNU/Linux system." 4.980 - echo "=== Tazinst end at `date` ===" >>$LOG 4.981 - umount_devices 4.982 -} 4.983 - 4.984 -##################### 4.985 -# Upgrade functions # 4.986 -##################### 4.987 - 4.988 -# Mount. 4.989 -prepare_upgrade() 4.990 -{ 4.991 - debug "Preparing the target partition..." 4.992 - # Mount point can be already used. 4.993 - if mount | grep -q $TARGET_ROOT; then 4.994 - umount $TARGET_ROOT 2>>$LOG 4.995 - fi 4.996 - mkdir -p $TARGET_ROOT && sleep 2 4.997 - # Mount target. 4.998 - mount $TGT_PARTITION $TARGET_ROOT >>$LOG 2>>$LOG 4.999 - if [ $(mount | grep -c "mnt/target") == "0" ]; then 4.1000 - abort 5 "Can't mount $TGT_PARTITION" 4.1001 - fi 4.1002 -} 4.1003 - 4.1004 -# Check for a valid SliTaz 4.1005 -check_release() 4.1006 -{ 4.1007 - if [ -f $TARGET_ROOT/etc/slitaz-release ]; then 4.1008 - release=`cat $TARGET_ROOT/etc/slitaz-release` 4.1009 - msg "Preparing upgrade of SliTaz release: $release" 4.1010 - else 4.1011 - abort 6 "The partition '$TGT_PARTITION' doesn't appear to contain \ 4.1012 -a SliTaz system, the file: /etc/slitaz-release doesn't exist." 4.1013 - fi && sleep 2 4.1014 -} 4.1015 - 4.1016 -# Backup target packages list. 4.1017 -backup_files() 4.1018 -{ 4.1019 - cd $TARGET_ROOT || abort 8 "Internal" 4.1020 - ls -1 var/lib/tazpkg/installed > home/packages-selection.list 4.1021 - for dir in * 4.1022 - do 4.1023 - case "$dir" in 4.1024 - boot) 4.1025 - rm -rf boot/vmlinuz-* ;; 4.1026 - home) 4.1027 - mv home home.bak 4.1028 - debug "keeping /home found on: $TGT_PARTITION" ;; 4.1029 - etc) 4.1030 - tar czf etc.tar.gz etc 4.1031 - mv etc etc.bak 4.1032 - debug "keeping /etc found on: $TGT_PARTITION" ;; 4.1033 - var) 4.1034 - if [ -d var/www ]; then 4.1035 - mv var/www www.bak 4.1036 - debug "keeping /var/www found on: $TGT_PARTITION" 4.1037 - fi 4.1038 - rm -rf var 2>>$LOG ;; 4.1039 - lost+found) 4.1040 - continue ;; 4.1041 - *) 4.1042 - debug "removing target: $dir" 4.1043 - rm -rf $dir 2>>$LOG ;; 4.1044 - esac 4.1045 - done 4.1046 - if [ -d mklost+found ]; then 4.1047 - mklost+found 2>>$LOG 4.1048 - fi 4.1049 - sleep 2 4.1050 -} 4.1051 - 4.1052 -# Restore backups. 4.1053 -restore_files() 4.1054 -{ 4.1055 - rm -rf $TARGET_ROOT/home 4.1056 - mv $TARGET_ROOT/home.bak $TARGET_ROOT/home 4.1057 - rm -rf $TARGET_ROOT/etc 4.1058 - mv $TARGET_ROOT/etc.bak $TARGET_ROOT/etc 4.1059 - if [ -d $TARGET_ROOT/www.bak ]; then 4.1060 - rm -rf $TARGET_ROOT/var/www 4.1061 - mv $TARGET_ROOT/www.bak $TARGET_ROOT/var/www 4.1062 - fi 4.1063 - debug "backups restored: `date`" 4.1064 - 4.1065 - # /var/lib/slitaz-installer 4.1066 - mkdir -p $TARGET_ROOT/var/lib/tazinst 4.1067 - mv $TARGET_ROOT/etc.tar.gz $TARGET_ROOT/var/lib/tazinst 4.1068 - mv $TARGET_ROOT/home/packages-selection.list $TARGET_ROOT/var/lib/tazinst 4.1069 -} 4.1070 - 4.1071 -# Added pkgs 4.1072 -install_pkgs() 4.1073 -{ 4.1074 - # Check if the pkg is on the mirror. 4.1075 - debug "Checking the availability of packages..." 4.1076 - touch packages-to-install.list 4.1077 - packages=0 4.1078 - diff=`cat packages-selection.diff | sort` 4.1079 - for pkg in $diff 4.1080 - do 4.1081 - if grep -q ^$pkg-[0-9] /var/lib/tazpkg/packages.list; then 4.1082 - packages=$(($packages+1)) 4.1083 - echo "$pkg" >> packages-to-install.list 4.1084 - fi 4.1085 - done 4.1086 - 4.1087 - # Calculate the percent for one package and install. 4.1088 - debug "Installing any packages..." 4.1089 - sleep 2 4.1090 - if [ "$packages" == "0" ]; then 4.1091 - debug "packages to install: 0" 4.1092 - else 4.1093 - onepkg=$((48/$packages)) 4.1094 - pct=50 4.1095 - # Get-install all missing pkgs. 4.1096 - for pkg in `cat packages-to-install.list` 4.1097 - do 4.1098 - pct=$(($pct+$onepkg)) 4.1099 - echo $pct 4.1100 - debug "Installing: $pkg..." 4.1101 - # Get install package and answer yes in case of dependencies. 4.1102 - pkgname=`grep ^$pkg /var/lib/tazpkg/packages.list` 4.1103 - tazpkg get $pkg >/dev/null 2>/dev/null 4.1104 - yes "" | tazpkg install $pkgname.tazpkg --root=$TARGET_ROOT >/dev/null 2>/dev/null 4.1105 - rm -f $pkgname.tazpkg 4.1106 - done 4.1107 - fi 4.1108 - echo 100 4.1109 - debug "Installation of packages complete..." 4.1110 - sleep 2 4.1111 -} 4.1112 - 4.1113 -# Search for added pkgs 4.1114 -update_pkgs() 4.1115 -{ 4.1116 - cd $TARGET_ROOT/var/lib/tazinst || abort 8 "Internal" 4.1117 - # LiveCD packages list. 4.1118 - debug "Creating package lists..." 4.1119 - ls -1 $TARGET_ROOT/var/lib/tazpkg/installed > packages-source.list || exit 1 4.1120 - debug "packages-source.list: done" 4.1121 - # Diff 4.1122 - diff packages-source.list packages-selection.list | \ 4.1123 - grep ^+[a-z] | sed s/^+// > packages-selection.diff 4.1124 - debug "packages-selection.diff: done" 4.1125 - # Get mirror list. 4.1126 - tazpkg recharge >>$LOG 2>>$LOG 4.1127 - if [ -f /var/lib/tazpkg/packages.list ]; then 4.1128 - install_pkgs 4.1129 - else 4.1130 - touch packages-to-install.list 4.1131 - warning "The list of available packages on the mirror could not be \ 4.1132 -downloaded. No missing packages will be reinstalled now, but \ 4.1133 -you can do so later by looking at the following list: \ 4.1134 -/var/lib/tazinst/packages-selection.diff" 4.1135 - fi 4.1136 - sleep 2 4.1137 -} 4.1138 - 4.1139 -# Update grub conf 4.1140 -grub_update() 4.1141 -{ 4.1142 - # Backup and create a new grub menu.lst. 4.1143 - if [ "$TGT_GRUB" == "yes" ]; then 4.1144 - msg "Grub update" 4.1145 - mv $TARGET_ROOT/boot/grub/menu.lst \ 4.1146 - $TARGET_ROOT/boot/grub/menu.lst.bak 2>/dev/null 4.1147 - grub_config 4.1148 - fi 4.1149 -} 4.1150 - 4.1151 -# Prepare the partition to upgrade, backup, install, restore configs 4.1152 -# and reinstall pkgs. 4.1153 -upgrade_files() 4.1154 -{ 4.1155 - # saving pwd 4.1156 - local save_pwd=$(pwd) 4.1157 - cd $TARGET_ROOT || abort 8 "Internal" 4.1158 - 4.1159 - debug "Searching for /etc/slitaz-release" 4.1160 - check_release 4.1161 - 4.1162 - msg "Backup /etc, /home and the packages list..." 4.1163 - backup_files 4.1164 - 4.1165 - msg "Upgrading SliTaz on $TGT_PARTITION" 4.1166 - 4.1167 - debug "Copying the bootloader syslinux/isolinux..." 4.1168 - copy_bootloaders 4.1169 - 4.1170 - debug "Extracting the root system..." 4.1171 - extract_rootfs $SOURCE_ROOT/boot 4.1172 - 4.1173 - msg "Restoring configuration files..." 4.1174 - restore_files 4.1175 - 4.1176 - debug "Installing the kernel..." 4.1177 - install_kernel 4.1178 - 4.1179 - msg "Upgrading added packages..." 4.1180 - update_pkgs 4.1181 - 4.1182 - # restoring pwd 4.1183 - cd $save_pwd 4.1184 -} 4.1185 - 4.1186 -# End of system upgrade. 4.1187 -end_of_upgrade() 4.1188 -{ 4.1189 - pkgscd=`cat $TARGET_ROOT/var/lib/tazinst/packages-source.list | wc -l` 4.1190 - pkginst=`cat $TARGET_ROOT/var/lib/tazinst/packages-to-install.list | wc -l` 4.1191 - echo -e "Upgrade finished. You can now restart (reboot) \ 4.1192 -from your SliTaz GNU/Linux system. 4.1193 -Packages on the cdrom : $pkgscd 4.1194 -Packages installed from the mirror : $pkginst" 4.1195 - echo "=== Tazinst end at `date` ===" >>$LOG 4.1196 - umount_devices 4.1197 -} 4.1198 - 4.1199 -###################### 4.1200 -# Installer sequence # 4.1201 -###################### 4.1202 - 4.1203 -case $1 in 4.1204 - install) 4.1205 - INST_ACTION=install 4.1206 - check_root 4.1207 - init $@ 4.1208 - read_configuration_file $2 4.1209 - check_vars 4.1210 - check_source 4.1211 - prepare_install 4.1212 - install_files 4.1213 - grub_install 4.1214 - end_of_install ;; 4.1215 - upgrade) 4.1216 - INST_ACTION=upgrade 4.1217 - check_root 4.1218 - init $@ 4.1219 - read_configuration_file $2 4.1220 - check_vars 4.1221 - check_source 4.1222 - prepare_upgrade 4.1223 - upgrade_files 4.1224 - grub_update 4.1225 - end_of_upgrade ;; 4.1226 - config) 4.1227 - gen_config $2 ;; 4.1228 - cli) 4.1229 - check_root 4.1230 - init $@ 4.1231 - check_cli_options $@ 4.1232 - check_vars 4.1233 - check_source 4.1234 - summary 4.1235 - case $INST_ACTION in 4.1236 - upgrade) 4.1237 - prepare_upgrade 4.1238 - upgrade_files 4.1239 - grub_update 4.1240 - end_of_upgrade ;; 4.1241 - install) 4.1242 - prepare_install 4.1243 - install_files 4.1244 - grub_install 4.1245 - end_of_install ;; 4.1246 - esac ;; 4.1247 - usage|*) 4.1248 - usage ;; 4.1249 -esac 4.1250 - 4.1251 -exit 0
5.1 --- a/core/rootfs/usr/share/doc/slitaz/tazinst.fr.html Wed Jun 01 12:07:12 2011 +0200 5.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 5.3 @@ -1,223 +0,0 @@ 5.4 -<!DOCTYPE html> 5.5 -<html xmlns="http://www.w3.org/1999/xhtml"> 5.6 -<head> 5.7 - <title>Tazinst Manual - Manuel de l'installeur 'tazinst'</title> 5.8 - <meta charset="utf-8" /> 5.9 - <link rel="shortcut icon" href="favicon.ico" /> 5.10 - <link rel="stylesheet" type="text/css" href="style.css" /> 5.11 -</head> 5.12 -<body> 5.13 - 5.14 -<!-- Header --> 5.15 -<div id="header"> 5.16 - <h1>Tazinst Manual</h1> 5.17 -</div> 5.18 - 5.19 -<!-- Start content --> 5.20 -<div id="content"> 5.21 - 5.22 -<h2>NOM</h2> 5.23 -<p> 5.24 - Tazinst - Tiny autonomous zone installer manager 5.25 -</p> 5.26 - 5.27 -<h2>SYNTAXE</h2> 5.28 -<pre> 5.29 -tazinst [commande] [fichier de configuration] 5.30 -</pre> 5.31 - 5.32 -<h2>DESCRIPTION</h2> 5.33 -<p> 5.34 - Tazinst est l'installateur ultra léger (~29 Ko) de SliTaz sur disque dur. 5.35 - Il permet d'installer SliTaz au choix à partir du Live-CD, d'une clé 5.36 - LiveUSB, d'une image ISO de SliTaz, ou depuis le web en téléchargeant la 5.37 - version stable, la version cooking ou en donnant le lien http d'une autre 5.38 - iso (ex: iso de developpement). 5.39 -</p> 5.40 -<p> 5.41 - Tazinst permet de formatter la partition cible aux formats de base ext2, 5.42 - ext3, ext4 ou d'autres formats si les paquets correspondants ont été 5.43 - installés. La partition /home peut être installée sur une autre partition, 5.44 - et si besoin être formattée avant l'installation dans un des formats 5.45 - disponibles. Tazinst peut, à la demande, installer le chargeur de démarrage 5.46 - Grub dans le mbr du disque cible. Un dual-boot avec une partition Windows© 5.47 - existante est possible, la recherche de la partition Windows© étant soit 5.48 - automatique, soit précisée manuellement. 5.49 -</p> 5.50 -<p> 5.51 - Tazinst permet également la mise à jour de SliTaz déjà installé sur une 5.52 - partition du disque dur, ce qui est pratique en cas de changement de 5.53 - version. Dans ce cas, Slitaz est mis à jour, les données présentes dans 5.54 - /home sont préservées, et les paquets supplémentaires sont réinstallés 5.55 - dans la nouvelle version. 5.56 -</p> 5.57 -<p> 5.58 - Tazinst a été créé pour les besoins de SliTaz GNU/Linux, mini distribution 5.59 - autonome. 5.60 -</p> 5.61 -<p> 5.62 - Tazinst, écrit en script shell à partir de zéro est compatible Bash, et 5.63 - fonctionne avec Ash du projet Busybox. Tazinst est distribué sous license 5.64 - libre GNU gpl v3. 5.65 -</p> 5.66 - 5.67 -<h2>COMMANDES</h2> 5.68 -<a name="config"></a> 5.69 -<h3>config</h3> 5.70 -<p> 5.71 - Génère un fichier de configuration autodocumenté, qui une fois édité suivant 5.72 - les besoins de l'utilisateur, permettra d'installer ou mettre à jour SliTaz 5.73 - sur disque dur, en utilisant <code>tazinst install [nom du fichier]</code>. 5.74 -</p> 5.75 -<pre> 5.76 -tazinst config /var/lib/tazinst.conf 5.77 -</pre> 5.78 - 5.79 -<p> 5.80 - Le fichier de configuration contient les variables suivantes : 5.81 -</p> 5.82 -<ul> 5.83 - <li>Les variables décrivant la source d'installation :</li> 5.84 -</ul> 5.85 - 5.86 -<ol> 5.87 -<li class="level1"><div class="li"> * INST_TYPE : le type du support contenant les 5.88 -fichiers sources de SliTaz, au choix : cdrom (LiveCD de SliTaz), usb (LiveUSB de SliTaz), 5.89 -iso (Image ISO de SliTaz), web (Image ISO sur le Web), weboot, ex : <code>INST_TYPE=web 5.90 -</code></div> 5.91 -</li> 5.92 -<li class="level1"><div class="li"> * SRC_FILE : le nom de la source contenant SliTaz. 5.93 -Il dépend du type de support : 5.94 - <ul> 5.95 - <li class="level2"><div class="li">cdrom (LiveCD de SliTaz) : <i>inutilisé</i> 5.96 - </div></li> 5.97 - <li class="level2"><div class="li">usb (LiveUSB de SliTaz) : Nom de la partition 5.98 - hôte de périphérique USB, ex : <code>SRC_FILE=/dev/sdb1</code> 5.99 - </div></li> 5.100 - <li class="level2"><div class="li">iso (Image ISO de SliTaz) : Nom du fichier ISO, 5.101 - ex : <code>SRC_FILE=~/slitaz.3.0.iso</code> 5.102 - </div></li> 5.103 - <li class="level2"><div class="li">web (Image ISO sur le Web) : Nom de l'URL, 5.104 - ex : <code>SRC_FILE=http://mirror.slitaz.org/iso/cooking/slitaz-cooking.iso 5.105 - </code>. À noter que 3 URL sont prédéfinies : 'stable', 'cooking, 'rolling', 5.106 - ex : <code>SRC_FILE=cooking</code> téléchargera la dernière cooking disponible 5.107 - sur le web 5.108 - </div></li> 5.109 - <li class="level2"><div class="li">weboot : <i>inutilisé</i></div></li> 5.110 - </ul></div> 5.111 -</li> 5.112 -</ol> 5.113 - 5.114 -<ul> 5.115 -<li class="level1"><div class="li"> Les variables décrivant la partition cible : </div> 5.116 -</li> 5.117 -</ul> 5.118 - 5.119 -<ol> 5.120 -<li class="level1"><div class="li"> * TGT_PARTITION : Le nom de la partition cible sur 5.121 -laquelle SliTaz sera insallé ou mis à jour, ex : <code>TGT_PARTITION=/dev/hda3</code></div> 5.122 -</li> 5.123 -<li class="level1"><div class="li">TGT_FS : Si cette variable est renseignée, la partition 5.124 -cible sera formatée dans le système de fichiers indiqué, sinon, la partition sera nettoyée 5.125 -et le répertoire /home sera conservé, ex : <code>TGT_FS=ext3</code></div> 5.126 -</li> 5.127 -<li class="level1"><div class="li">TGT_HOME : Cette variable indique, si besoin est, le nom 5.128 -de la partition recevant le répertoire /home, ex : <code>TGT_HOME=/dev/hda5</code></div> 5.129 -</li> 5.130 -<li class="level1"><div class="li">TGT_HOME_FS : Si cette variable est renseignée, la 5.131 -partition/home sera formatée dans le système de fichiers indiqué, ex : 5.132 -<code>TGT_HOME_FS=ext2</code></div> 5.133 -</li> 5.134 -</ol> 5.135 - 5.136 -<ul> 5.137 -<li class="level1"><div class="li"> Les variables de configuration de Slitaz : </div> 5.138 -</li> 5.139 -</ul> 5.140 - 5.141 -<ol> 5.142 -<li class="level1"><div class="li">TGT_HOSTNAME : Nom du système, ex : <code>TGT_HOSTNAME=hd-slitaz 5.143 -</code>, par défaut <code>TGT_HOSTNAME=slitaz</code></div> 5.144 -</li> 5.145 -<li class="level1"><div class="li">TGT_ROOT_PWD : Mot de passe du super-utilisateur, ex : 5.146 -<code>TGT_ROOT_PWD=toor</code>, par défaut <code>TGT_ROOT_PWD=root</code></div> 5.147 -</li> 5.148 -<li class="level1"><div class="li">TGT_USER : Nom de l'utitisateur par défaut, ex : 5.149 -<code>TGT_USER=toto</code>, par défaut <code>TGT_USER=tux</code></div> 5.150 -</li> 5.151 -<li class="level1"><div class="li">TGT_USER_PWD : Mot de passe de l'utitisateur par 5.152 -défaut, ex : <code>TGT_USER_PWD=titi</code>, par défaut <code>TGT_USER_PWD=tux</code></div> 5.153 -</li> 5.154 -</ol> 5.155 - 5.156 -<ul> 5.157 -<li class="level1"><div class="li"> Les variables de configuration du chargeur de démarrage 5.158 -(bootloader) : </div> 5.159 -</li> 5.160 -</ul> 5.161 - 5.162 -<ol> 5.163 - <li>TGT_GRUB : Installation de GRUB (yes ou no), ex : 5.164 - <code>TGT_GRUB=yes</code>, par défaut <code>TGT_GRUB=no</code> 5.165 - </li> 5.166 - <li class="level1"><div class="li">TGT_MENU_PARTITION: Nom de la partition où le fichier de 5.167 - configuration de GRUB est installé. Normalement, cette variable n'est pas renseignée, elle peut 5.168 - servir dans le cas où GRUB est installé dans une partition dédiée, ou dans une configuration 5.169 - multi-os, ex : <code>TGT_MENU_PARTITION=/dev/hda4</code></div> 5.170 - </li> 5.171 - <li class="level1"><div class="li">TGT_WINBOOT : Si cette variable est renseignée, elle 5.172 - indique la partition contenant Windows© pour mettre en place un Dual-boot. Elle peut être 5.173 - aussi positionnée à 'auto', dans ce cas le dual-boot se fera sur la première partition 5.174 - Windows© détectée, ex : <code>TGT_WINBOOT=auto</code></div> 5.175 - </li> 5.176 -</ol> 5.177 - 5.178 -<p> 5.179 - À noter que seules les variables précédées d'une atérisque sont obligatoires, 5.180 - les autres sont optionnelles. Ainsi un fichier de configuration minimaliste 5.181 - peut être le suivant: 5.182 -</p> 5.183 -<pre> 5.184 -INST_TYPE=cdrom 5.185 -TGT_PARTITION=/dev/hda3 5.186 -</pre> 5.187 -<p> 5.188 - Ce fichier permettra une installation de SliTaz sur /dev/hda3, sans 5.189 - formatter la partition, à partir d'un LiveCD. 5.190 -</p> 5.191 - 5.192 -<a name="install"></a> 5.193 -<h3>install</h3> 5.194 -<p> 5.195 - Lance l'installation de SliTaz en fonction des données présentes dans le 5.196 - fichier de configuration. 5.197 -</p> 5.198 -<pre> 5.199 -tazinst install /var/lib/tazinst.conf 5.200 -</pre> 5.201 - 5.202 -<a name="upgrade"></a> 5.203 -<h3>upgrade</h3> 5.204 -<p> 5.205 - Lance la mise à jour de SliTaz en fonction des données présentes dans le 5.206 - fichier de configuration. 5.207 -</p> 5.208 -<pre> 5.209 -tazinst upgrade /var/lib/tazinst.conf 5.210 -</pre> 5.211 - 5.212 -<h2>MAINTENEUR</h2> 5.213 -<p> 5.214 - Christophe Lincoln <pankso at slitaz.org> 5.215 - Dominique Corbex <domcox at slitaz.org> 5.216 -</p> 5.217 - 5.218 -<!-- End of content --> 5.219 -</div> 5.220 - 5.221 -<div id="footer"> 5.222 - Copyright © 2011 <a href="http://www.slitaz.org/">SliTaz GNU/Linux</a> 5.223 -</div> 5.224 - 5.225 -</body> 5.226 -</html>
6.1 Binary file core/rootfs/usr/share/images/panel-background.png has changed
7.1 Binary file core/rootfs/usr/share/slim/themes/slitaz/panel.png has changed
8.1 --- a/core/rootfs/usr/share/slim/themes/slitaz/slim.theme Wed Jun 01 12:07:12 2011 +0200 8.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 8.3 @@ -1,37 +0,0 @@ 8.4 -# SliTaz theme for SLiM 8.5 -# 8.6 - 8.7 -# Messages 8.8 -msg_color #000000 8.9 -msg_font Vera:size=18:bold:dpi=75 8.10 -msg_x 50% 8.11 -msg_y 35% 8.12 -msg_shadow_color #FFFFFF 8.13 -msg_shadow_xoffset 1 8.14 -msg_shadow_yoffset 1 8.15 - 8.16 -# valid values: stretch, tile 8.17 -#background_style stretch 8.18 -background_color #351a0a 8.19 - 8.20 -# Input controls 8.21 -input_panel_x 50% 8.22 -input_panel_y 50% 8.23 -input_name_x 105 8.24 -input_name_y 214 8.25 -input_font Sans:size=12:dpi=75 8.26 -input_fgcolor #3c3c3c 8.27 - 8.28 -# Username / password request 8.29 -# username_font Sans:size=12:bold:dpi=75 8.30 -username_font Sans:size=12:bold:dpi=75 8.31 -username_color #6a6a6a 8.32 -username_x 16% 8.33 -username_y 214 8.34 -password_x 17% 8.35 -password_y 214 8.36 -username_shadow_xoffset 1 8.37 -username_shadow_yoffset 1 8.38 - 8.39 -username_msg Username: 8.40 -password_msg Password: