rev |
line source |
pankso@8
|
1 # /etc/network.conf: SliTaz system wide networking configuration.
|
pankso@8
|
2 # Config file used by: /etc/init.d/network.sh
|
pankso@8
|
3 #
|
pankso@8
|
4
|
al@393
|
5 NETWORK_CONF_VERSION="2"
|
al@393
|
6
|
pankso@8
|
7 # Set default interface.
|
pankso@8
|
8 INTERFACE="eth0"
|
pankso@8
|
9
|
pankso@8
|
10 # Dynamic IP address.
|
pankso@8
|
11 # Enable/disable DHCP client at boot time.
|
pankso@8
|
12 DHCP="yes"
|
pankso@8
|
13
|
al@393
|
14
|
al@393
|
15 #
|
al@393
|
16 # Settings only for static IP address.
|
al@393
|
17 #
|
al@393
|
18
|
pankso@8
|
19 # Enable/disable static IP at boot time.
|
pankso@8
|
20 STATIC="no"
|
pankso@8
|
21
|
paul@181
|
22 # Set IP address and netmask for a static IP.
|
pankso@8
|
23 IP="192.168.0.6"
|
pankso@8
|
24 NETMASK="255.255.255.0"
|
pankso@8
|
25
|
erjo@326
|
26 # Set broadcast address
|
erjo@326
|
27 BROADCAST="192.168.0.255"
|
erjo@326
|
28
|
pankso@8
|
29 # Set route gateway for a static IP.
|
pankso@8
|
30 GATEWAY="192.168.0.1"
|
pankso@8
|
31
|
erjo@326
|
32 # Set domain name
|
erjo@326
|
33 DOMAIN=""
|
erjo@326
|
34
|
paul@181
|
35 # Set DNS server for a static IP.
|
pankso@8
|
36 DNS_SERVER="192.168.0.1"
|
pankso@8
|
37
|
al@393
|
38
|
al@393
|
39 #
|
al@393
|
40 # Wi-Fi settings.
|
al@393
|
41 #
|
al@393
|
42
|
pankso@68
|
43 # Enable/disable wireless connection at boot time.
|
pankso@68
|
44 WIFI="no"
|
pankso@68
|
45
|
al@393
|
46 # Set "yes" if you don't want to store networks you're already connected.
|
al@393
|
47 WIFI_BLANK_NETWORKS=""
|
al@393
|
48
|
al@393
|
49
|
al@393
|
50 #
|
al@393
|
51 # Wi-Fi settings for iwconfig.
|
al@393
|
52 #
|
al@393
|
53
|
al@393
|
54 # Wi-Fi interface. It can auto-search interface if value below is fail.
|
pankso@68
|
55 WIFI_INTERFACE="wlan0"
|
al@393
|
56
|
al@393
|
57 # WPA driver; default is "wext" (Wireless Extension).
|
al@393
|
58 WIFI_WPA_DRIVER="wext"
|
al@393
|
59
|
al@393
|
60 # Set the operating mode of the device. The mode can be "Ad-Hoc", "Managed",
|
al@393
|
61 # "Master", "Repeater", "Secondary", "Monitor" or "Auto".
|
al@393
|
62 WIFI_MODE="managed"
|
al@393
|
63
|
al@393
|
64 # Set the operating channel in the device. Empty by default.
|
al@393
|
65 WIFI_CHANNEL=""
|
al@393
|
66
|
paul@395
|
67 # Force the card to register to the Access Point given by the address, if it's
|
paul@395
|
68 # possible. Empty by default to automatic mode.
|
al@393
|
69 WIFI_AP=""
|
al@393
|
70
|
al@393
|
71
|
al@393
|
72 #
|
al@393
|
73 # Wi-Fi settings for wpa_supplicant (for given network).
|
al@393
|
74 #
|
al@393
|
75
|
al@393
|
76 # SSID (network name)
|
pascal@85
|
77 WIFI_ESSID="any"
|
al@393
|
78
|
al@393
|
79 # BSSID (optional), use this block to associate with the AP
|
al@393
|
80 WIFI_BSSID=""
|
al@393
|
81
|
al@393
|
82 # Wi-Fi security. Empty ("") for open network; "ANY" for trying many methods;
|
al@393
|
83 # "WEP" for WEP; "WPA" for WPA/WPA2-PSK; "EAP" for 802.1x EAP.
|
al@393
|
84 WIFI_KEY_TYPE="any"
|
al@393
|
85
|
al@393
|
86 # Password for WEP, WPA, EAP, WAPI, and ANY; both in ASCII or HEX form.
|
pankso@346
|
87 WIFI_KEY=""
|
pankso@346
|
88
|
al@393
|
89 # Method for EAP: "PEAP", "TLS", "TTLS", "PWD".
|
al@393
|
90 WIFI_EAP_METHOD=""
|
al@393
|
91
|
al@393
|
92 # File path to CA certificate file (PEM/DER).
|
al@393
|
93 WIFI_CA_CERT=""
|
al@393
|
94
|
al@393
|
95 # File path to client certificate file (PEM/DER).
|
al@393
|
96 WIFI_CLIENT_CERT=""
|
al@393
|
97
|
al@393
|
98 # Identity string for EAP.
|
pankso@346
|
99 WIFI_IDENTITY=""
|
al@393
|
100
|
al@393
|
101 # Anonymous identity string for EAP.
|
al@393
|
102 WIFI_ANONYMOUS_IDENTITY=""
|
al@393
|
103
|
al@393
|
104 # Inner authentication parameters: "", "PAP", "MSCHAP", "MSCHAPV2", "GTC".
|
al@393
|
105 WIFI_PHASE2=""
|