wok-6.x rev 19159
/etc/init.d/*: use 'action' in pair with 'status'.
'action' returns translated message, so why not to add full translatable /etc/init.d/* content
'action' returns translated message, so why not to add full translatable /etc/init.d/* content
line diff
1.1 --- a/acpid/stuff/init.d/acpid Wed May 25 23:07:05 2016 +0200 1.2 +++ b/acpid/stuff/init.d/acpid Thu May 26 20:16:45 2016 +0300 1.3 @@ -9,7 +9,7 @@ 1.4 . /etc/daemons.conf 1.5 1.6 NAME=acpid 1.7 -DESC="ACPI event deamon" 1.8 +DESC="$(_ 'ACPI event deamon')" 1.9 DAEMON=/usr/sbin/acpid 1.10 OPTIONS=$ACPID_OPTIONS 1.11 PIDFILE=/var/run/acpid.pid 1.12 @@ -17,37 +17,36 @@ 1.13 case "$1" in 1.14 start) 1.15 if active_pidfile $PIDFILE $NAME ; then 1.16 - echo "$NAME already running." 1.17 + _ '%s is already running.' $NAME 1.18 exit 1 1.19 fi 1.20 - echo -n "Starting $DESC: $NAME... " 1.21 + action 'Starting %s: %s...' "$DESC" $NAME 1.22 $DAEMON $OPTIONS 1.23 status 1.24 ;; 1.25 stop) 1.26 if ! active_pidfile $PIDFILE $NAME ; then 1.27 - echo "$NAME is not running." 1.28 + _ '%s is not running.' $NAME 1.29 exit 1 1.30 fi 1.31 - echo -n "Stopping $DESC: $NAME... " 1.32 - kill `cat $PIDFILE` 1.33 + action 'Stopping %s: %s...' "$DESC" $NAME 1.34 + kill $(cat $PIDFILE) 1.35 status 1.36 ;; 1.37 restart) 1.38 if ! active_pidfile $PIDFILE $NAME ; then 1.39 - echo "$NAME is not running." 1.40 + _ '%s is not running.' $NAME 1.41 exit 1 1.42 fi 1.43 - echo -n "Restarting $DESC: $NAME... " 1.44 - kill `cat $PIDFILE` 1.45 + action 'Restarting %s: %s...' "$DESC" $NAME 1.46 + kill $(cat $PIDFILE) 1.47 sleep 2 1.48 $DAEMON $OPTIONS 1.49 status 1.50 ;; 1.51 *) 1.52 - echo "" 1.53 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 1.54 - echo "" 1.55 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 1.56 + newline 1.57 exit 1 1.58 ;; 1.59 esac
2.1 --- a/ajaxterm/stuff/etc/init.d/ajaxterm Wed May 25 23:07:05 2016 +0200 2.2 +++ b/ajaxterm/stuff/etc/init.d/ajaxterm Thu May 26 20:16:45 2016 +0300 2.3 @@ -1,5 +1,5 @@ 2.4 #!/bin/sh 2.5 -# /etc/init.d/ajaxterm : Start, stop and restart AjaxTerm server on SliTaz, at 2.6 +# /etc/init.d/ajaxterm : Start, stop and restart AjaxTerm server on SliTaz, at 2.7 # boot time or with the command line. 2.8 # 2.9 # To start AjaxTerm server at boot time, just put ajaxterm in the $RUN_DAEMONS 2.10 @@ -9,7 +9,7 @@ 2.11 . /etc/daemons.conf 2.12 2.13 NAME=AjaxTerm 2.14 -DESC="AjaxTerm server" 2.15 +DESC="$(_ '%s server' AjaxTerm)" 2.16 DAEMON="/usr/share/ajaxterm/ajaxterm.py" 2.17 OPTIONS=$AJAXTERM_OPTIONS 2.18 PIDFILE=/var/run/ajaxterm.pid 2.19 @@ -19,32 +19,32 @@ 2.20 case "$1" in 2.21 start) 2.22 if active_pidfile $PIDFILE python ; then 2.23 - echo "$NAME already running." 2.24 + _ '%s is already running.' $NAME 2.25 exit 1 2.26 fi 2.27 - echo -n "Starting $DESC: $NAME... " 2.28 + action 'Starting %s: %s...' "$DESC" $NAME 2.29 $DAEMON $OPTIONS 2.30 status 2.31 sleep 2 2.32 ;; 2.33 stop) 2.34 if ! active_pidfile $PIDFILE python ; then 2.35 - echo "$NAME is not running." 2.36 + _ '%s is not running.' $NAME 2.37 exit 1 2.38 fi 2.39 - echo -n "Stopping $DESC: $NAME... " 2.40 - kill `cat $PIDFILE` 2.41 + action 'Stopping %s: %s...' "$DESC" $NAME 2.42 + kill $(cat $PIDFILE) 2.43 status 2.44 rm -f $PIDFILE 2.45 sleep 2 2.46 ;; 2.47 restart) 2.48 if ! active_pidfile $PIDFILE python ; then 2.49 - echo "$NAME is not running." 2.50 + _ '%s is not running.' $NAME 2.51 exit 1 2.52 fi 2.53 - echo -n "Restarting $DESC: $NAME... " 2.54 - kill `cat $PIDFILE` 2.55 + action 'Restarting %s: %s...' "$DESC" $NAME 2.56 + kill $(cat $PIDFILE) 2.57 rm -f $PIDFILE 2.58 sleep 2 2.59 $DAEMON $OPTIONS 2.60 @@ -52,9 +52,8 @@ 2.61 sleep 2 2.62 ;; 2.63 *) 2.64 - echo "" 2.65 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 2.66 - echo "" 2.67 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 2.68 + newline 2.69 exit 1 2.70 ;; 2.71 esac
3.1 --- a/apache/stuff/apache Wed May 25 23:07:05 2016 +0200 3.2 +++ b/apache/stuff/apache Thu May 26 20:16:45 2016 +0300 3.3 @@ -1,5 +1,5 @@ 3.4 #!/bin/sh 3.5 -# /etc/init.d/apache: Start, stop and restart Apache web server on SliTaz, 3.6 +# /etc/init.d/apache: Start, stop and restart Apache web server on SliTaz, 3.7 # at boot time or with the command line. Daemons options are configured 3.8 # with /etc/daemons.conf 3.9 # 3.10 @@ -7,7 +7,7 @@ 3.11 . /etc/daemons.conf 3.12 3.13 NAME=Apache 3.14 -DESC="Apache Web Server" 3.15 +DESC="$(_ 'Apache Web Server')" 3.16 DAEMON=/usr/bin/apachectl 3.17 OPTIONS=$APACHE_OPTIONS 3.18 PIDFILE=/var/run/apache/httpd.pid 3.19 @@ -15,45 +15,44 @@ 3.20 case "$1" in 3.21 start) 3.22 if active_pidfile $PIDFILE httpd ; then 3.23 - echo "$NAME already running." 3.24 + _ '%s is already running.' $NAME 3.25 exit 1 3.26 fi 3.27 - echo -n "Starting $DESC: $NAME... " 3.28 - $DAEMON $OPTIONS -k start 3.29 + action 'Starting %s: %s...' "$DESC" $NAME 3.30 + $DAEMON $OPTIONS -k start 3.31 status 3.32 ;; 3.33 stop) 3.34 if ! active_pidfile $PIDFILE httpd ; then 3.35 - echo "$NAME is not running." 3.36 + _ '%s is not running.' $NAME 3.37 exit 1 3.38 fi 3.39 - echo -n "Stopping $DESC: $NAME... " 3.40 + action 'Stopping %s: %s...' "$DESC" $NAME 3.41 $DAEMON $OPTIONS -k stop 3.42 rm $PIDFILE 3.43 status 3.44 ;; 3.45 reload) 3.46 if ! active_pidfile $PIDFILE httpd ; then 3.47 - echo "$NAME is not running." 3.48 + _ '%s is not running.' $NAME 3.49 exit 1 3.50 fi 3.51 - echo -n "Stopping $DESC: $NAME... " 3.52 + action 'Stopping %s: %s...' "$DESC" $NAME 3.53 $DAEMON $OPTIONS -k graceful 3.54 status 3.55 ;; 3.56 restart) 3.57 if ! active_pidfile $PIDFILE httpd ; then 3.58 - echo "$NAME is not running." 3.59 + _ '%s is not running.' $NAME 3.60 exit 1 3.61 fi 3.62 - echo -n "Restarting $DESC: $NAME... " 3.63 + action 'Restarting %s: %s...' "$DESC" $NAME 3.64 $DAEMON $OPTIONS -k restart 3.65 status 3.66 ;; 3.67 *) 3.68 - echo "" 3.69 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|reload|restart]" 3.70 - echo "" 3.71 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|reload|restart]" 3.72 + newline 3.73 exit 1 3.74 ;; 3.75 esac
4.1 --- a/at/stuff/atd Wed May 25 23:07:05 2016 +0200 4.2 +++ b/at/stuff/atd Thu May 26 20:16:45 2016 +0300 4.3 @@ -1,5 +1,5 @@ 4.4 #!/bin/sh 4.5 -# Start, stop and restart a atd deamon on SliTaz, at boot time or 4.6 +# Start, stop and restart a atd deamon on SliTaz, at boot time or 4.7 # with the command line. 4.8 # 4.9 # To start daemon at boot time, just put the right name in the $RUN_DAEMONS 4.10 @@ -8,7 +8,7 @@ 4.11 . /etc/init.d/rc.functions 4.12 4.13 NAME=$(basename $0) 4.14 -DESC="$NAME deamon" 4.15 +DESC="$(_ '%s daemon' $NAME)" 4.16 DAEMON=$(which $NAME) 4.17 eval $(grep -i ^${NAME}_OPTIONS /etc/daemons.conf | sed 's/.*_OPT/OPT/') 4.18 PIDFILE=/var/run/$NAME.pid 4.19 @@ -16,41 +16,40 @@ 4.20 case "$1" in 4.21 start) 4.22 if active_pidfile $PIDFILE $NAME ; then 4.23 - echo "$NAME is already running." 4.24 + _ '%s is already running.' $NAME 4.25 exit 1 4.26 fi 4.27 - echo -n "Starting $DESC: $NAME... " 4.28 - $DAEMON $OPTIONS 4.29 - [ -f $PIDFILE ] || pidof $NAME | awk '{ print $1 }' > $PIDFILE 4.30 + action 'Starting %s: %s...' "$DESC" $NAME 4.31 + $DAEMON $OPTIONS 4.32 + [ -f $PIDFILE ] || pidof $NAME | awk '{print $1}' > $PIDFILE 4.33 active_pidfile $PIDFILE $NAME 4.34 status 4.35 ;; 4.36 stop) 4.37 if ! active_pidfile $PIDFILE $NAME ; then 4.38 - echo "$NAME is not running." 4.39 + _ '%s is not running.' $NAME 4.40 exit 1 4.41 fi 4.42 - echo -n "Stopping $DESC: $NAME... " 4.43 - kill `cat $PIDFILE` 4.44 + action 'Stopping %s: %s...' "$DESC" $NAME 4.45 + kill $(cat $PIDFILE) 4.46 status 4.47 ;; 4.48 restart) 4.49 if ! active_pidfile $PIDFILE $NAME ; then 4.50 - echo "$NAME is not running." 4.51 + _ '%s is not running.' $NAME 4.52 exit 1 4.53 fi 4.54 - echo -n "Restarting $DESC: $NAME... " 4.55 - kill `cat $PIDFILE` 4.56 + action 'Restarting %s: %s...' "$DESC" $NAME 4.57 + kill $(cat $PIDFILE) 4.58 sleep 2 4.59 $DAEMON $OPTIONS 4.60 - [ -f $PIDFILE ] || pidof $NAME | awk '{ print $1 }' > $PIDFILE 4.61 + [ -f $PIDFILE ] || pidof $NAME | awk '{print $1}' > $PIDFILE 4.62 active_pidfile $PIDFILE $NAME 4.63 status 4.64 ;; 4.65 -*) 4.66 - echo "" 4.67 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 4.68 - echo "" 4.69 + *) 4.70 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 4.71 + newline 4.72 exit 1 4.73 ;; 4.74 esac
5.1 --- a/autofs/stuff/etc/init.d/autofs Wed May 25 23:07:05 2016 +0200 5.2 +++ b/autofs/stuff/etc/init.d/autofs Thu May 26 20:16:45 2016 +0300 5.3 @@ -1,5 +1,5 @@ 5.4 #!/bin/sh 5.5 -# /etc/init.d/autofs : Start, stop and restart automounter on SliTaz, at 5.6 +# /etc/init.d/autofs : Start, stop and restart automounter on SliTaz, at 5.7 # boot time or with the command line. 5.8 # 5.9 # To start automounter at boot time, just put dropbear in the $RUN_DAEMONS 5.10 @@ -9,7 +9,7 @@ 5.11 . /etc/daemons.conf 5.12 5.13 NAME=Automount 5.14 -DESC="Automount server" 5.15 +DESC="$(_ '%s server' Automount)" 5.16 DAEMON=/usr/sbin/automount 5.17 OPTIONS=$AUTOMOUNT_OPTIONS 5.18 PIDFILE=/var/run/automount.pid 5.19 @@ -17,39 +17,38 @@ 5.20 case "$1" in 5.21 start) 5.22 if active_pidfile $PIDFILE automount ; then 5.23 - echo "$NAME already running." 5.24 + _ '%s is already running.' $NAME 5.25 exit 1 5.26 fi 5.27 - echo -n "Starting $DESC: $NAME... " 5.28 + action 'Starting %s: %s...' "$DESC" $NAME 5.29 modprobe autofs4 5.30 $DAEMON $OPTIONS 5.31 status 5.32 ;; 5.33 stop) 5.34 if ! active_pidfile $PIDFILE automount ; then 5.35 - echo "$NAME is not running." 5.36 + _ '%s is not running.' $NAME 5.37 exit 1 5.38 fi 5.39 - echo -n "Stopping $DESC: $NAME... " 5.40 - kill `cat $PIDFILE` 5.41 + action 'Stopping %s: %s...' "$DESC" $NAME 5.42 + kill $(cat $PIDFILE) 5.43 rmmod autofs4 5.44 status 5.45 ;; 5.46 restart) 5.47 if ! active_pidfile $PIDFILE automount ; then 5.48 - echo "$NAME is not running." 5.49 + _ '%s is not running.' $NAME 5.50 exit 1 5.51 fi 5.52 - echo -n "Restarting $DESC: $NAME... " 5.53 - kill `cat $PIDFILE` 5.54 + action 'Restarting %s: %s...' "$DESC" $NAME 5.55 + kill $(cat $PIDFILE) 5.56 sleep 2 5.57 $DAEMON $OPTIONS 5.58 status 5.59 ;; 5.60 *) 5.61 - echo "" 5.62 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 5.63 - echo "" 5.64 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 5.65 + newline 5.66 exit 1 5.67 ;; 5.68 esac
6.1 --- a/backuppc/stuff/etc/init.d/backuppc Wed May 25 23:07:05 2016 +0200 6.2 +++ b/backuppc/stuff/etc/init.d/backuppc Thu May 26 20:16:45 2016 +0300 6.3 @@ -9,7 +9,7 @@ 6.4 . /etc/daemons.conf 6.5 6.6 NAME=BackupPC 6.7 -DESC="backuppc deamon" 6.8 +DESC="$(_ '%s daemon' backuppc)" 6.9 DAEMON=/usr/bin/BackupPC 6.10 OPTIONS=$BACKUPPC_OPTIONS 6.11 [ -n "$OPTIONS" ] || OPTIONS="-d" 6.12 @@ -18,45 +18,44 @@ 6.13 case "$1" in 6.14 start) 6.15 if active_pidfile $PIDFILE $NAME ; then 6.16 - echo "$NAME already running." 6.17 + _ '%s is already running.' $NAME 6.18 exit 1 6.19 fi 6.20 - echo -n "Starting $DESC: $NAME... " 6.21 + action 'Starting %s: %s...' "$DESC" $NAME 6.22 su -s /bin/sh -c "$DAEMON $OPTIONS" www 6.23 - pidof $NAME | awk '{ print $1 }' > $PIDFILE 6.24 + pidof $NAME | awk '{print $1}' > $PIDFILE 6.25 status 6.26 ;; 6.27 stop) 6.28 if ! active_pidfile $PIDFILE $NAME ; then 6.29 - echo "$NAME is not running." 6.30 + _ '%s is not running.' $NAME 6.31 exit 1 6.32 fi 6.33 - echo -n "Stopping $DESC: $NAME... " 6.34 - kill `cat $PIDFILE` 6.35 + action 'Stopping %s: %s...' "$DESC" $NAME 6.36 + kill $(cat $PIDFILE) 6.37 rm $PIDFILE 6.38 status 6.39 ;; 6.40 restart) 6.41 if ! active_pidfile $PIDFILE $NAME ; then 6.42 - echo "$NAME is not running." 6.43 + _ '%s is not running.' $NAME 6.44 exit 1 6.45 fi 6.46 - echo -n "Restarting $DESC: $NAME... " 6.47 - kill `cat $PIDFILE` 6.48 + action 'Restarting %s: %s...' "$DESC" $NAME 6.49 + kill $(cat $PIDFILE) 6.50 rm $PIDFILE 6.51 sleep 2 6.52 su -c "$DAEMON $OPTIONS" www 6.53 - pidof $NAME | awk '{ print $1 }' > $PIDFILE 6.54 + pidof $NAME | awk '{print $1}' > $PIDFILE 6.55 status 6.56 ;; 6.57 reload) 6.58 - kill -1 `cat $PIDFILE` 6.59 + kill -1 $(cat $PIDFILE) 6.60 status 6.61 ;; 6.62 *) 6.63 - echo "" 6.64 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 6.65 - echo "" 6.66 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload]" 6.67 + newline 6.68 exit 1 6.69 ;; 6.70 esac
7.1 --- a/bind/stuff/etc/init.d/named Wed May 25 23:07:05 2016 +0200 7.2 +++ b/bind/stuff/etc/init.d/named Thu May 26 20:16:45 2016 +0300 7.3 @@ -9,7 +9,7 @@ 7.4 . /etc/daemons.conf 7.5 7.6 NAME=Named 7.7 -DESC="Named deamon" 7.8 +DESC="$(_ '%s daemon' Named)" 7.9 DAEMON=/usr/sbin/named 7.10 OPTIONS=$NAMED_OPTIONS 7.11 PIDFILE=/var/run/named.pid 7.12 @@ -19,19 +19,19 @@ 7.13 case "$1" in 7.14 start) 7.15 if active_pidfile $PIDFILE named ; then 7.16 - echo "$NAME already running." 7.17 + _ '%s is already running.' $NAME 7.18 exit 1 7.19 fi 7.20 - echo -n "Starting $DESC: $NAME... " 7.21 - $DAEMON $OPTIONS 7.22 + action 'Starting %s: %s...' "$DESC" $NAME 7.23 + $DAEMON $OPTIONS 7.24 status 7.25 ;; 7.26 stop) 7.27 if ! active_pidfile $PIDFILE named ; then 7.28 - echo "$NAME is not running." 7.29 + _ '%s is not running.' $NAME 7.30 exit 1 7.31 fi 7.32 - echo -n "Stopping $DESC: $NAME... " 7.33 + action 'Stopping %s: %s...' "$DESC" $NAME 7.34 /usr/sbin/rndc stop 7.35 status 7.36 ;; 7.37 @@ -41,19 +41,18 @@ 7.38 ;; 7.39 restart) 7.40 if ! active_pidfile $PIDFILE named ; then 7.41 - echo "$NAME is not running." 7.42 + _ '%s is not running.' $NAME 7.43 exit 1 7.44 fi 7.45 - echo -n "Restarting $DESC: $NAME... " 7.46 + action 'Restarting %s: %s...' "$DESC" $NAME 7.47 /usr/sbin/rndc stop 7.48 sleep 2 7.49 $DAEMON $OPTIONS 7.50 status 7.51 ;; 7.52 *) 7.53 - echo "" 7.54 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|reload|restart]" 7.55 - echo "" 7.56 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload]" 7.57 + newline 7.58 exit 1 7.59 ;; 7.60 esac
8.1 --- a/boxbackup-client/stuff/bbackupd Wed May 25 23:07:05 2016 +0200 8.2 +++ b/boxbackup-client/stuff/bbackupd Thu May 26 20:16:45 2016 +0300 8.3 @@ -9,7 +9,7 @@ 8.4 . /etc/daemons.conf 8.5 8.6 NAME=BBackupd 8.7 -DESC="BoxBackup deamon" 8.8 +DESC="$(_ '%s daemon' BoxBackup)" 8.9 DAEMON=/usr/bin/bbackupd 8.10 OPTIONS=$BBSTORED_OPTIONS 8.11 PIDFILE=/var/run/bbackupd.pid 8.12 @@ -17,39 +17,38 @@ 8.13 case "$1" in 8.14 start) 8.15 if active_pidfile $PIDFILE bbackupd ; then 8.16 - echo "$NAME already running." 8.17 + _ '%s is already running.' $NAME 8.18 exit 1 8.19 fi 8.20 - echo -n "Starting $DESC: $NAME... " 8.21 - $DAEMON $OPTIONS > /dev/null 8.22 + action 'Starting %s: %s...' "$DESC" $NAME 8.23 + $DAEMON $OPTIONS >/dev/null 8.24 status 8.25 ;; 8.26 stop) 8.27 if ! active_pidfile $PIDFILE bbackupd ; then 8.28 - echo "$NAME is not running." 8.29 + _ '%s is not running.' $NAME 8.30 exit 1 8.31 fi 8.32 - echo -n "Stopping $DESC: $NAME... " 8.33 - kill `cat $PIDFILE` 8.34 - rm -f $PIDFILE 8.35 + action 'Stopping %s: %s...' "$DESC" $NAME 8.36 + kill $(cat $PIDFILE) 8.37 + rm -f $PIDFILE 8.38 status 8.39 ;; 8.40 restart) 8.41 if ! active_pidfile $PIDFILE bbackupd ; then 8.42 - echo "$NAME is not running." 8.43 + _ '%s is not running.' $NAME 8.44 exit 1 8.45 fi 8.46 - echo -n "Restarting $DESC: $NAME... " 8.47 - kill `cat $PIDFILE` 8.48 - rm -f $PIDFILE 8.49 + action 'Restarting %s: %s...' "$DESC" $NAME 8.50 + kill $(cat $PIDFILE) 8.51 + rm -f $PIDFILE 8.52 sleep 2 8.53 - $DAEMON $OPTIONS > /dev/null 8.54 + $DAEMON $OPTIONS >/dev/null 8.55 status 8.56 ;; 8.57 *) 8.58 - echo "" 8.59 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 8.60 - echo "" 8.61 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 8.62 + newline 8.63 exit 1 8.64 ;; 8.65 esac
9.1 --- a/boxbackup-server/stuff/bbstored Wed May 25 23:07:05 2016 +0200 9.2 +++ b/boxbackup-server/stuff/bbstored Thu May 26 20:16:45 2016 +0300 9.3 @@ -9,7 +9,7 @@ 9.4 . /etc/daemons.conf 9.5 9.6 NAME=BBstored 9.7 -DESC="BoxBackup server deamon" 9.8 +DESC="$(_ 'BoxBackup server deamon')" 9.9 DAEMON=/usr/bin/bbstored 9.10 OPTIONS=$BBSTORED_OPTIONS 9.11 PIDFILE=/var/run/bbstored.pid 9.12 @@ -17,39 +17,38 @@ 9.13 case "$1" in 9.14 start) 9.15 if active_pidfile $PIDFILE bbstored ; then 9.16 - echo "$NAME already running." 9.17 + _ '%s is already running.' $NAME 9.18 exit 1 9.19 fi 9.20 - echo -n "Starting $DESC: $NAME... " 9.21 - $DAEMON $OPTIONS > /dev/null 9.22 + action 'Starting %s: %s...' "$DESC" $NAME 9.23 + $DAEMON $OPTIONS >/dev/null 9.24 status 9.25 ;; 9.26 stop) 9.27 if ! active_pidfile $PIDFILE bbstored ; then 9.28 - echo "$NAME is not running." 9.29 + _ '%s is not running.' $NAME 9.30 exit 1 9.31 fi 9.32 - echo -n "Stopping $DESC: $NAME... " 9.33 - kill `cat $PIDFILE` 9.34 - rm -f $PIDFILE 9.35 + action 'Stopping %s: %s...' "$DESC" $NAME 9.36 + kill $(cat $PIDFILE) 9.37 + rm -f $PIDFILE 9.38 status 9.39 ;; 9.40 restart) 9.41 if ! active_pidfile $PIDFILE bbstored ; then 9.42 - echo "$NAME is not running." 9.43 + _ '%s is not running.' $NAME 9.44 exit 1 9.45 fi 9.46 - echo -n "Restarting $DESC: $NAME... " 9.47 - kill `cat $PIDFILE` 9.48 - rm -f $PIDFILE 9.49 + action 'Restarting %s: %s...' "$DESC" $NAME 9.50 + kill $(cat $PIDFILE) 9.51 + rm -f $PIDFILE 9.52 sleep 2 9.53 - $DAEMON $OPTIONS > /dev/null 9.54 + $DAEMON $OPTIONS >/dev/null 9.55 status 9.56 ;; 9.57 *) 9.58 - echo "" 9.59 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 9.60 - echo "" 9.61 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 9.62 + newline 9.63 exit 1 9.64 ;; 9.65 esac
10.1 --- a/busybox/receipt Wed May 25 23:07:05 2016 +0200 10.2 +++ b/busybox/receipt Thu May 26 20:16:45 2016 +0300 10.3 @@ -109,7 +109,13 @@ 10.4 cp $stuff/busybox.conf-ssfs $rootfs/etc/busybox.conf 10.5 chown -R 0.0 $rootfs/etc 10.6 chmod 0600 $rootfs/etc/busybox.conf 10.7 - chmod 4755 $rootfs/bin/busybox ;; 10.8 + chmod 4755 $rootfs/bin/busybox 10.9 + 10.10 + # Compile translations 10.11 + make -C $stuff/po install 10.12 + 10.13 + ;; 10.14 + 10.15 esac 10.16 } 10.17
11.1 --- a/busybox/stuff/daemon Wed May 25 23:07:05 2016 +0200 11.2 +++ b/busybox/stuff/daemon Thu May 26 20:16:45 2016 +0300 11.3 @@ -1,5 +1,5 @@ 11.4 #!/bin/sh 11.5 -# Start, stop and restart a busybox deamon on SliTaz, at boot time or 11.6 +# Start, stop and restart a busybox deamon on SliTaz, at boot time or 11.7 # with the command line. 11.8 # 11.9 # To start daemon at boot time, just put the right name in the $RUN_DAEMONS 11.10 @@ -8,12 +8,13 @@ 11.11 . /etc/init.d/rc.functions 11.12 11.13 NAME=$(basename $0) 11.14 -DESC="$NAME deamon" 11.15 +DESC="$(_ '%s daemon' $NAME)" 11.16 DAEMON=$(which $NAME) 11.17 for p in ${PATH//:/ }; do 11.18 [ -L $p/$NAME ] || continue 11.19 case "$(readlink $p/$NAME)" in 11.20 - *busybox) DAEMON=$p/$NAME 11.21 + *busybox) 11.22 + DAEMON=$p/$NAME 11.23 break 11.24 esac 11.25 done 11.26 @@ -24,10 +25,10 @@ 11.27 { 11.28 if grep $DAEMON /etc/inetd.conf | grep -q ^\#; then 11.29 sed -i "s,^#\(.*$DAEMON.*\)$,\1," /etc/inetd.conf 11.30 - /etc/init.d/inetd stop > /dev/null 11.31 + /etc/init.d/inetd stop >/dev/null 11.32 exec /etc/init.d/inetd start 11.33 else 11.34 - echo "$NAME is already active." 11.35 + _ '%s is already active.' $NAME 11.36 exit 1 11.37 fi 11.38 } 11.39 @@ -35,11 +36,11 @@ 11.40 inactive_inetd() 11.41 { 11.42 if grep $DAEMON /etc/inetd.conf | grep -q ^\#; then 11.43 - echo "$NAME is not active." 11.44 + _ '%s is not active.' $NAME 11.45 exit 1 11.46 else 11.47 sed -i "s,^.*$DAEMON.*$,#&," /etc/inetd.conf 11.48 - /etc/init.d/inetd stop > /dev/null 11.49 + /etc/init.d/inetd stop >/dev/null 11.50 exec /etc/init.d/inetd start 11.51 fi 11.52 } 11.53 @@ -48,43 +49,42 @@ 11.54 start) 11.55 grep -qs $DAEMON /etc/inetd.conf && active_inetd 11.56 if active_pidfile $PIDFILE $NAME ; then 11.57 - echo "$NAME is already running." 11.58 + _ '%s is already running.' $NAME 11.59 exit 1 11.60 fi 11.61 - echo -n "Starting $DESC: $NAME... " 11.62 - $DAEMON $OPTIONS 11.63 - [ -f $PIDFILE ] || pidof $NAME | awk '{ print $1 }' > $PIDFILE 11.64 + action 'Starting %s: %s...' "$DESC" $NAME 11.65 + $DAEMON $OPTIONS 11.66 + [ -f $PIDFILE ] || pidof $NAME | awk '{print $1}' > $PIDFILE 11.67 active_pidfile $PIDFILE $NAME 11.68 status 11.69 ;; 11.70 stop) 11.71 grep -qs $DAEMON /etc/inetd.conf && inactive_inetd 11.72 if ! active_pidfile $PIDFILE $NAME ; then 11.73 - echo "$NAME is not running." 11.74 + _ '%s is not running.' $NAME 11.75 exit 1 11.76 fi 11.77 - echo -n "Stopping $DESC: $NAME... " 11.78 - kill `cat $PIDFILE` 11.79 + action 'Stopping %s: %s...' "$DESC" $NAME 11.80 + kill $(cat $PIDFILE) 11.81 status 11.82 ;; 11.83 restart) 11.84 grep -qs $DAEMON /etc/inetd.conf && exit 0 11.85 if ! active_pidfile $PIDFILE $NAME ; then 11.86 - echo "$NAME is not running." 11.87 + _ '%s is not running.' $NAME 11.88 exit 1 11.89 fi 11.90 - echo -n "Restarting $DESC: $NAME... " 11.91 - kill `cat $PIDFILE` 11.92 + action 'Restarting %s: %s...' "$DESC" $NAME 11.93 + kill $(cat $PIDFILE) 11.94 sleep 2 11.95 $DAEMON $OPTIONS 11.96 - [ -f $PIDFILE ] || pidof $NAME | awk '{ print $1 }' > $PIDFILE 11.97 + [ -f $PIDFILE ] || pidof $NAME | awk '{print $1}' > $PIDFILE 11.98 active_pidfile $PIDFILE $NAME 11.99 status 11.100 ;; 11.101 -*) 11.102 - echo "" 11.103 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 11.104 - echo "" 11.105 + *) 11.106 + emsg "<n><b>$(_ 'Usage:')</b> /etc/init.d/$(basename $0) [start|stop|restart]" 11.107 + newline 11.108 exit 1 11.109 ;; 11.110 esac
12.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 12.2 +++ b/busybox/stuff/po/LINGUAS Thu May 26 20:16:45 2016 +0300 12.3 @@ -0,0 +1,1 @@ 12.4 +ru
13.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 13.2 +++ b/busybox/stuff/po/Makefile Thu May 26 20:16:45 2016 +0300 13.3 @@ -0,0 +1,51 @@ 13.4 +# Makefile for daemon. 13.5 +# 13.6 +prefix ?= /usr 13.7 +datarootdir ?= $(prefix)/share 13.8 +localedir ?= $(datarootdir)/locale 13.9 +DESTDIR ?= 13.10 +LINGUAS ?= $(shell cat LINGUAS) 13.11 +POTFILES ?= $(shell cat POTFILES) 13.12 +VERSION ?= 1.0 13.13 + 13.14 +.PHONY: all pot msgmerge msgfmt 13.15 + 13.16 +all: msgfmt 13.17 + 13.18 +pot: 13.19 + xgettext -o daemon.pot -L Shell \ 13.20 + --package-name=daemon \ 13.21 + --package-version="$(VERSION)" \ 13.22 + -kaction -k_ -k_n \ 13.23 + $(POTFILES) 13.24 + 13.25 +msgmerge: 13.26 + @for l in $(LINGUAS); do \ 13.27 + if [ -f "$$l.po" ]; then \ 13.28 + echo -n "Updating $$l po file."; \ 13.29 + msgmerge -U $$l.po daemon.pot ; \ 13.30 + fi; \ 13.31 + done 13.32 + 13.33 +msgfmt: 13.34 + @for l in $(LINGUAS); do \ 13.35 + if [ -f "$$l.po" ]; then \ 13.36 + echo -n "Compiling daemon $$l mo file... "; \ 13.37 + msgfmt -o $$l.mo $$l.po ; \ 13.38 + echo "done"; \ 13.39 + fi; \ 13.40 + done; 13.41 + 13.42 +install: msgfmt 13.43 + @for l in $(LINGUAS); do \ 13.44 + install -m 0755 -d $(DESTDIR)$(localedir)/$$l/LC_MESSAGES; \ 13.45 + install -m 0644 $$l.mo \ 13.46 + $(DESTDIR)$(localedir)/$$l/LC_MESSAGES/daemon.mo; \ 13.47 + done; 13.48 + 13.49 +clean: 13.50 + rm -f *~ 13.51 + rm -f *.mo 13.52 + 13.53 +help: 13.54 + @echo "make [ pot | msgmerge | msgfmt | all | install | clean ]"
14.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 14.2 +++ b/busybox/stuff/po/POTFILES Thu May 26 20:16:45 2016 +0300 14.3 @@ -0,0 +1,86 @@ 14.4 +../daemon 14.5 +../../../acpid/stuff/init.d/acpid 14.6 +../../../ajaxterm/stuff/etc/init.d/ajaxterm 14.7 +../../../apache/stuff/apache 14.8 +../../../at/stuff/atd 14.9 +../../../autofs/stuff/etc/init.d/autofs 14.10 +../../../backuppc/stuff/etc/init.d/backuppc 14.11 +../../../bind/stuff/etc/init.d/named 14.12 +../../../boxbackup-client/stuff/bbackupd 14.13 +../../../boxbackup-server/stuff/bbstored 14.14 +../../../cherokee/stuff/cherokee 14.15 +../../../chillispot/stuff/chilli 14.16 +../../../c_icap/stuff/c-icapd 14.17 +../../../clamav/stuff/daemon-clamd 14.18 +../../../collectd/stuff/collectd 14.19 +../../../connman/stuff/etc/init.d/connman 14.20 +../../../cups/stuff/etc/init.d/cupsd 14.21 +../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd 14.22 +../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl 14.23 +../../../dbus/stuff/etc/init.d/dbus 14.24 +../../../ddclient/stuff/ddclient 14.25 +../../../dhcp/stuff/dhcpd 14.26 +../../../dhid/stuff/init.d/dhid 14.27 +../../../distcc/stuff/distccd 14.28 +../../../dnsmasq/stuff/etc/init.d/dnsmasq 14.29 +../../../dovecot/stuff/init.d/dovecot 14.30 +../../../dropbear/stuff/init.d/dropbear 14.31 +../../../fail2ban/stuff/etc/init.d/fail2ban 14.32 +../../../fcron/stuff/fcron 14.33 +../../../git/stuff/git-daemon 14.34 +../../../gpm/stuff/etc/init.d/gpm 14.35 +../../../hal/stuff/etc/init.d/hald 14.36 +../../../hostapd/stuff/hostapd 14.37 +../../../knock/stuff/etc/init.d/knock 14.38 +../../../lighttpd/stuff/etc/init.d/lighttpd 14.39 +../../../linux64-zram/stuff/compcache 14.40 +../../../linux-zram/stuff/compcache 14.41 +../../../lxdm/stuff/init.d/lxdm 14.42 +../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon 14.43 +../../../mariadb/stuff/etc/init.d/mysql 14.44 +../../../motion/stuff/init.d/motion 14.45 +../../../mpd/stuff/etc/init.d/mpd 14.46 +../../../mysql/stuff/etc/init.d/mysql 14.47 +../../../nagios/stuff/nagios 14.48 +../../../nagios-nrpe/stuff/nrpe 14.49 +../../../netatalk/stuff/etc/init.d/netatalk 14.50 +../../../netatalk-pam/stuff/etc/init.d/netatalk 14.51 +../../../nfs-utils/stuff/etc/init.d/nfsd 14.52 +../../../nginx/stuff/etc/init.d/nginx 14.53 +../../../nginx-extras/stuff/etc/init.d/nginx 14.54 +../../../nscd/stuff/nscd 14.55 +../../../ntop/stuff/etc/init.d/ntop 14.56 +../../../ntp/stuff/ntp 14.57 +../../../ofono/stuff/etc/init.d/ofono 14.58 +../../../openerp-server/stuff/etc/init.d/openerp-server 14.59 +../../../openerp-web/stuff/etc/init.d/openerp-web 14.60 +../../../openldap/stuff/etc/init.d/openldap 14.61 +../../../openssh/stuff/openssh 14.62 +../../../open-vm-tools/stuff/vmtoolsd 14.63 +../../../openvpn/stuff/etc/init.d/openvpn-client 14.64 +../../../openvpn/stuff/etc/init.d/openvpn-server 14.65 +../../../partimage/stuff/etc/init.d/partimaged 14.66 +../../../pcsc-lite/stuff/init.d/pcscd 14.67 +../../../perdition/stuff/etc/init.d/perdition 14.68 +../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv 14.69 +../../../portmap/stuff/init.d/portmap 14.70 +../../../postfix/stuff/etc/init.d/postfix 14.71 +../../../postgresql/stuff/etc/init.d/postgresql 14.72 +../../../postgrey/stuff/etc/init.d/postgrey 14.73 +../../../privoxy/stuff/daemon-privoxy 14.74 +../../../pure-ftpd/stuff/pure-ftpd 14.75 +../../../rsync/stuff/etc/init.d/rsyncd 14.76 +../../../samba/stuff/etc/init.d/samba 14.77 +../../../slim/stuff/etc/init.d/slim 14.78 +../../../smartmontools/stuff/etc/init.d/smartd 14.79 +../../../squid/stuff/etc/init.d/squid 14.80 +../../../thttpd/stuff/etc/init.d/thttpd 14.81 +../../../tinc/stuff/etc/init.d/tinc 14.82 +../../../tinyproxy/stuff/tinyproxy 14.83 +../../../transmission-daemon/stuff/transmission-daemon 14.84 +../../../unfs3/stuff/etc/init.d/unfsd 14.85 +../../../virtualbox-ose-guestutils/stuff/VBoxService 14.86 +../../../wicd/stuff/wicd 14.87 +../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant 14.88 +../../../x11vnc/stuff/x11vnc 14.89 +../../../ypserv/stuff/ypserv
15.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 15.2 +++ b/busybox/stuff/po/daemon.pot Thu May 26 20:16:45 2016 +0300 15.3 @@ -0,0 +1,784 @@ 15.4 +# SOME DESCRIPTIVE TITLE. 15.5 +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER 15.6 +# This file is distributed under the same license as the PACKAGE package. 15.7 +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. 15.8 +# 15.9 +#, fuzzy 15.10 +msgid "" 15.11 +msgstr "" 15.12 +"Project-Id-Version: daemon 1.0\n" 15.13 +"Report-Msgid-Bugs-To: \n" 15.14 +"POT-Creation-Date: 2016-05-26 19:12+0300\n" 15.15 +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" 15.16 +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" 15.17 +"Language-Team: LANGUAGE <LL@li.org>\n" 15.18 +"Language: \n" 15.19 +"MIME-Version: 1.0\n" 15.20 +"Content-Type: text/plain; charset=CHARSET\n" 15.21 +"Content-Transfer-Encoding: 8bit\n" 15.22 + 15.23 +#: ../daemon:11 ../../../at/stuff/atd:11 15.24 +#: ../../../backuppc/stuff/etc/init.d/backuppc:12 15.25 +#: ../../../bind/stuff/etc/init.d/named:12 15.26 +#: ../../../boxbackup-client/stuff/bbackupd:12 15.27 +#: ../../../clamav/stuff/daemon-clamd:12 15.28 +#: ../../../cups/stuff/etc/init.d/cupsd:12 ../../../dhcp/stuff/dhcpd:12 15.29 +#: ../../../distcc/stuff/distccd:23 15.30 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:12 15.31 +#: ../../../dovecot/stuff/init.d/dovecot:12 ../../../fcron/stuff/fcron:12 15.32 +#: ../../../git/stuff/git-daemon:12 ../../../linux64-zram/stuff/compcache:10 15.33 +#: ../../../linux-zram/stuff/compcache:10 ../../../nagios-nrpe/stuff/nrpe:12 15.34 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:11 15.35 +#: ../../../open-vm-tools/stuff/vmtoolsd:12 15.36 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:12 15.37 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:12 15.38 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:11 15.39 +#: ../../../rsync/stuff/etc/init.d/rsyncd:12 15.40 +#: ../../../tinc/stuff/etc/init.d/tinc:12 15.41 +#: ../../../transmission-daemon/stuff/transmission-daemon:12 15.42 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:12 15.43 +msgid "%s daemon" 15.44 +msgstr "" 15.45 + 15.46 +#: ../daemon:31 15.47 +msgid "%s is already active." 15.48 +msgstr "" 15.49 + 15.50 +#: ../daemon:39 15.51 +msgid "%s is not active." 15.52 +msgstr "" 15.53 + 15.54 +#: ../daemon:52 ../../../acpid/stuff/init.d/acpid:20 15.55 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:22 15.56 +#: ../../../apache/stuff/apache:18 ../../../at/stuff/atd:19 15.57 +#: ../../../autofs/stuff/etc/init.d/autofs:20 15.58 +#: ../../../backuppc/stuff/etc/init.d/backuppc:21 15.59 +#: ../../../bind/stuff/etc/init.d/named:22 15.60 +#: ../../../boxbackup-client/stuff/bbackupd:20 15.61 +#: ../../../boxbackup-server/stuff/bbstored:20 15.62 +#: ../../../cherokee/stuff/cherokee:18 ../../../chillispot/stuff/chilli:21 15.63 +#: ../../../c_icap/stuff/c-icapd:21 ../../../clamav/stuff/daemon-clamd:20 15.64 +#: ../../../collectd/stuff/collectd:20 15.65 +#: ../../../connman/stuff/etc/init.d/connman:21 15.66 +#: ../../../cups/stuff/etc/init.d/cupsd:31 15.67 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:21 15.68 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:21 15.69 +#: ../../../dbus/stuff/etc/init.d/dbus:23 ../../../ddclient/stuff/ddclient:19 15.70 +#: ../../../dhcp/stuff/dhcpd:20 ../../../dhid/stuff/init.d/dhid:17 15.71 +#: ../../../distcc/stuff/distccd:38 15.72 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:20 15.73 +#: ../../../dovecot/stuff/init.d/dovecot:24 15.74 +#: ../../../dropbear/stuff/init.d/dropbear:35 15.75 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:19 15.76 +#: ../../../fcron/stuff/fcron:20 ../../../git/stuff/git-daemon:20 15.77 +#: ../../../gpm/stuff/etc/init.d/gpm:20 ../../../hal/stuff/etc/init.d/hald:18 15.78 +#: ../../../hostapd/stuff/hostapd:18 ../../../knock/stuff/etc/init.d/knock:22 15.79 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:18 15.80 +#: ../../../linux64-zram/stuff/compcache:16 15.81 +#: ../../../linux-zram/stuff/compcache:16 ../../../lxdm/stuff/init.d/lxdm:18 15.82 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:19 15.83 +#: ../../../mariadb/stuff/etc/init.d/mysql:25 15.84 +#: ../../../motion/stuff/init.d/motion:16 ../../../mpd/stuff/etc/init.d/mpd:19 15.85 +#: ../../../mysql/stuff/etc/init.d/mysql:25 ../../../nagios/stuff/nagios:30 15.86 +#: ../../../nagios-nrpe/stuff/nrpe:25 15.87 +#: ../../../netatalk/stuff/etc/init.d/netatalk:45 15.88 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:45 15.89 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:25 15.90 +#: ../../../nginx/stuff/etc/init.d/nginx:18 15.91 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:18 ../../../nscd/stuff/nscd:23 15.92 +#: ../../../ntop/stuff/etc/init.d/ntop:26 ../../../ntp/stuff/ntp:21 15.93 +#: ../../../ofono/stuff/etc/init.d/ofono:21 15.94 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:33 15.95 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:22 15.96 +#: ../../../openldap/stuff/etc/init.d/openldap:20 15.97 +#: ../../../openssh/stuff/openssh:35 ../../../open-vm-tools/stuff/vmtoolsd:20 15.98 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:42 15.99 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:42 15.100 +#: ../../../partimage/stuff/etc/init.d/partimaged:24 15.101 +#: ../../../pcsc-lite/stuff/init.d/pcscd:17 15.102 +#: ../../../perdition/stuff/etc/init.d/perdition:25 15.103 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:20 15.104 +#: ../../../portmap/stuff/init.d/portmap:23 15.105 +#: ../../../postfix/stuff/etc/init.d/postfix:20 15.106 +#: ../../../postgrey/stuff/etc/init.d/postgrey:21 15.107 +#: ../../../privoxy/stuff/daemon-privoxy:22 15.108 +#: ../../../pure-ftpd/stuff/pure-ftpd:27 15.109 +#: ../../../rsync/stuff/etc/init.d/rsyncd:20 15.110 +#: ../../../samba/stuff/etc/init.d/samba:23 15.111 +#: ../../../samba/stuff/etc/init.d/samba:30 15.112 +#: ../../../slim/stuff/etc/init.d/slim:19 15.113 +#: ../../../smartmontools/stuff/etc/init.d/smartd:21 15.114 +#: ../../../squid/stuff/etc/init.d/squid:23 15.115 +#: ../../../thttpd/stuff/etc/init.d/thttpd:21 15.116 +#: ../../../tinc/stuff/etc/init.d/tinc:20 15.117 +#: ../../../tinyproxy/stuff/tinyproxy:15 15.118 +#: ../../../transmission-daemon/stuff/transmission-daemon:20 15.119 +#: ../../../unfs3/stuff/etc/init.d/unfsd:23 15.120 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:18 15.121 +#: ../../../wicd/stuff/wicd:20 15.122 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:20 15.123 +#: ../../../x11vnc/stuff/x11vnc:17 ../../../ypserv/stuff/ypserv:20 15.124 +msgid "%s is already running." 15.125 +msgstr "" 15.126 + 15.127 +#: ../daemon:55 ../../../acpid/stuff/init.d/acpid:23 15.128 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:25 15.129 +#: ../../../apache/stuff/apache:21 ../../../at/stuff/atd:22 15.130 +#: ../../../autofs/stuff/etc/init.d/autofs:23 15.131 +#: ../../../backuppc/stuff/etc/init.d/backuppc:24 15.132 +#: ../../../bind/stuff/etc/init.d/named:25 15.133 +#: ../../../boxbackup-client/stuff/bbackupd:23 15.134 +#: ../../../boxbackup-server/stuff/bbstored:23 15.135 +#: ../../../cherokee/stuff/cherokee:21 ../../../chillispot/stuff/chilli:24 15.136 +#: ../../../c_icap/stuff/c-icapd:24 ../../../clamav/stuff/daemon-clamd:23 15.137 +#: ../../../collectd/stuff/collectd:23 15.138 +#: ../../../connman/stuff/etc/init.d/connman:25 15.139 +#: ../../../cups/stuff/etc/init.d/cupsd:27 15.140 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:66 15.141 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:24 15.142 +#: ../../../dbus/stuff/etc/init.d/dbus:27 ../../../ddclient/stuff/ddclient:22 15.143 +#: ../../../dhcp/stuff/dhcpd:23 ../../../dhid/stuff/init.d/dhid:20 15.144 +#: ../../../distcc/stuff/distccd:41 15.145 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:23 15.146 +#: ../../../dovecot/stuff/init.d/dovecot:27 15.147 +#: ../../../dropbear/stuff/init.d/dropbear:38 15.148 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:22 15.149 +#: ../../../fcron/stuff/fcron:23 ../../../git/stuff/git-daemon:23 15.150 +#: ../../../gpm/stuff/etc/init.d/gpm:23 ../../../hal/stuff/etc/init.d/hald:21 15.151 +#: ../../../hostapd/stuff/hostapd:21 ../../../knock/stuff/etc/init.d/knock:25 15.152 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:21 15.153 +#: ../../../linux64-zram/stuff/compcache:24 15.154 +#: ../../../linux-zram/stuff/compcache:24 ../../../lxdm/stuff/init.d/lxdm:21 15.155 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:22 15.156 +#: ../../../mariadb/stuff/etc/init.d/mysql:34 15.157 +#: ../../../motion/stuff/init.d/motion:19 ../../../mpd/stuff/etc/init.d/mpd:22 15.158 +#: ../../../mysql/stuff/etc/init.d/mysql:34 ../../../nagios/stuff/nagios:33 15.159 +#: ../../../nagios-nrpe/stuff/nrpe:28 15.160 +#: ../../../netatalk/stuff/etc/init.d/netatalk:48 15.161 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:48 15.162 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:28 15.163 +#: ../../../nginx/stuff/etc/init.d/nginx:21 15.164 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:21 ../../../nscd/stuff/nscd:26 15.165 +#: ../../../ntop/stuff/etc/init.d/ntop:33 ../../../ntp/stuff/ntp:24 15.166 +#: ../../../ofono/stuff/etc/init.d/ofono:24 15.167 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:36 15.168 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:25 15.169 +#: ../../../openldap/stuff/etc/init.d/openldap:23 15.170 +#: ../../../openssh/stuff/openssh:38 ../../../open-vm-tools/stuff/vmtoolsd:23 15.171 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:45 15.172 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:45 15.173 +#: ../../../partimage/stuff/etc/init.d/partimaged:29 15.174 +#: ../../../pcsc-lite/stuff/init.d/pcscd:20 15.175 +#: ../../../perdition/stuff/etc/init.d/perdition:28 15.176 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:23 15.177 +#: ../../../portmap/stuff/init.d/portmap:27 15.178 +#: ../../../postfix/stuff/etc/init.d/postfix:23 15.179 +#: ../../../postgresql/stuff/etc/init.d/postgresql:25 15.180 +#: ../../../postgrey/stuff/etc/init.d/postgrey:36 15.181 +#: ../../../privoxy/stuff/daemon-privoxy:25 15.182 +#: ../../../pure-ftpd/stuff/pure-ftpd:30 15.183 +#: ../../../rsync/stuff/etc/init.d/rsyncd:23 15.184 +#: ../../../samba/stuff/etc/init.d/samba:25 15.185 +#: ../../../samba/stuff/etc/init.d/samba:32 15.186 +#: ../../../slim/stuff/etc/init.d/slim:22 15.187 +#: ../../../smartmontools/stuff/etc/init.d/smartd:24 15.188 +#: ../../../squid/stuff/etc/init.d/squid:33 15.189 +#: ../../../thttpd/stuff/etc/init.d/thttpd:24 15.190 +#: ../../../tinc/stuff/etc/init.d/tinc:23 15.191 +#: ../../../tinyproxy/stuff/tinyproxy:18 15.192 +#: ../../../transmission-daemon/stuff/transmission-daemon:23 15.193 +#: ../../../unfs3/stuff/etc/init.d/unfsd:27 15.194 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:21 15.195 +#: ../../../wicd/stuff/wicd:23 15.196 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:23 15.197 +#: ../../../x11vnc/stuff/x11vnc:20 ../../../ypserv/stuff/ypserv:23 15.198 +msgid "Starting %s: %s..." 15.199 +msgstr "" 15.200 + 15.201 +#: ../daemon:64 ../daemon:74 ../../../acpid/stuff/init.d/acpid:29 15.202 +#: ../../../acpid/stuff/init.d/acpid:38 15.203 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:32 15.204 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:43 15.205 +#: ../../../apache/stuff/apache:27 ../../../apache/stuff/apache:37 15.206 +#: ../../../apache/stuff/apache:46 ../../../at/stuff/atd:30 15.207 +#: ../../../at/stuff/atd:39 ../../../autofs/stuff/etc/init.d/autofs:30 15.208 +#: ../../../autofs/stuff/etc/init.d/autofs:40 15.209 +#: ../../../backuppc/stuff/etc/init.d/backuppc:31 15.210 +#: ../../../backuppc/stuff/etc/init.d/backuppc:41 15.211 +#: ../../../bind/stuff/etc/init.d/named:31 15.212 +#: ../../../bind/stuff/etc/init.d/named:44 15.213 +#: ../../../boxbackup-client/stuff/bbackupd:29 15.214 +#: ../../../boxbackup-client/stuff/bbackupd:39 15.215 +#: ../../../boxbackup-server/stuff/bbstored:29 15.216 +#: ../../../boxbackup-server/stuff/bbstored:39 15.217 +#: ../../../cherokee/stuff/cherokee:27 ../../../cherokee/stuff/cherokee:36 15.218 +#: ../../../chillispot/stuff/chilli:30 ../../../chillispot/stuff/chilli:39 15.219 +#: ../../../c_icap/stuff/c-icapd:30 ../../../c_icap/stuff/c-icapd:39 15.220 +#: ../../../clamav/stuff/daemon-clamd:29 ../../../clamav/stuff/daemon-clamd:39 15.221 +#: ../../../collectd/stuff/collectd:29 ../../../collectd/stuff/collectd:38 15.222 +#: ../../../connman/stuff/etc/init.d/connman:31 15.223 +#: ../../../connman/stuff/etc/init.d/connman:41 15.224 +#: ../../../connman/stuff/etc/init.d/connman:55 15.225 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:73 15.226 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:83 15.227 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:30 15.228 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:39 15.229 +#: ../../../dbus/stuff/etc/init.d/dbus:33 15.230 +#: ../../../dbus/stuff/etc/init.d/dbus:43 ../../../ddclient/stuff/ddclient:28 15.231 +#: ../../../ddclient/stuff/ddclient:38 ../../../dhcp/stuff/dhcpd:29 15.232 +#: ../../../dhcp/stuff/dhcpd:38 ../../../dhid/stuff/init.d/dhid:26 15.233 +#: ../../../dhid/stuff/init.d/dhid:36 ../../../distcc/stuff/distccd:47 15.234 +#: ../../../distcc/stuff/distccd:56 15.235 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:29 15.236 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:39 15.237 +#: ../../../dovecot/stuff/init.d/dovecot:33 15.238 +#: ../../../dovecot/stuff/init.d/dovecot:42 15.239 +#: ../../../dropbear/stuff/init.d/dropbear:44 15.240 +#: ../../../dropbear/stuff/init.d/dropbear:53 15.241 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:35 15.242 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:44 15.243 +#: ../../../fcron/stuff/fcron:29 ../../../fcron/stuff/fcron:38 15.244 +#: ../../../git/stuff/git-daemon:29 ../../../git/stuff/git-daemon:38 15.245 +#: ../../../gpm/stuff/etc/init.d/gpm:29 ../../../gpm/stuff/etc/init.d/gpm:38 15.246 +#: ../../../hal/stuff/etc/init.d/hald:27 ../../../hal/stuff/etc/init.d/hald:36 15.247 +#: ../../../hostapd/stuff/hostapd:27 ../../../hostapd/stuff/hostapd:36 15.248 +#: ../../../knock/stuff/etc/init.d/knock:31 15.249 +#: ../../../knock/stuff/etc/init.d/knock:40 15.250 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:27 15.251 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:37 15.252 +#: ../../../linux64-zram/stuff/compcache:30 15.253 +#: ../../../linux-zram/stuff/compcache:30 ../../../lxdm/stuff/init.d/lxdm:26 15.254 +#: ../../../lxdm/stuff/init.d/lxdm:35 15.255 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:29 15.256 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:39 15.257 +#: ../../../mariadb/stuff/etc/init.d/mysql:47 15.258 +#: ../../../mariadb/stuff/etc/init.d/mysql:57 15.259 +#: ../../../motion/stuff/init.d/motion:26 ../../../mpd/stuff/etc/init.d/mpd:29 15.260 +#: ../../../mpd/stuff/etc/init.d/mpd:38 15.261 +#: ../../../mysql/stuff/etc/init.d/mysql:47 15.262 +#: ../../../mysql/stuff/etc/init.d/mysql:57 ../../../nagios/stuff/nagios:40 15.263 +#: ../../../nagios/stuff/nagios:49 ../../../nagios-nrpe/stuff/nrpe:34 15.264 +#: ../../../nagios-nrpe/stuff/nrpe:43 15.265 +#: ../../../netatalk/stuff/etc/init.d/netatalk:58 15.266 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:58 15.267 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:45 15.268 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:60 15.269 +#: ../../../nginx/stuff/etc/init.d/nginx:27 15.270 +#: ../../../nginx/stuff/etc/init.d/nginx:37 15.271 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:27 15.272 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:37 ../../../nscd/stuff/nscd:33 15.273 +#: ../../../nscd/stuff/nscd:43 ../../../ntop/stuff/etc/init.d/ntop:39 15.274 +#: ../../../ntop/stuff/etc/init.d/ntop:48 ../../../ntp/stuff/ntp:31 15.275 +#: ../../../ntp/stuff/ntp:41 ../../../ofono/stuff/etc/init.d/ofono:31 15.276 +#: ../../../ofono/stuff/etc/init.d/ofono:41 15.277 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:47 15.278 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:57 15.279 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:31 15.280 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:40 15.281 +#: ../../../openldap/stuff/etc/init.d/openldap:35 15.282 +#: ../../../openldap/stuff/etc/init.d/openldap:44 15.283 +#: ../../../openssh/stuff/openssh:44 ../../../openssh/stuff/openssh:53 15.284 +#: ../../../open-vm-tools/stuff/vmtoolsd:34 15.285 +#: ../../../open-vm-tools/stuff/vmtoolsd:43 15.286 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:51 15.287 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:61 15.288 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:51 15.289 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:61 15.290 +#: ../../../partimage/stuff/etc/init.d/partimaged:40 15.291 +#: ../../../pcsc-lite/stuff/init.d/pcscd:26 15.292 +#: ../../../perdition/stuff/etc/init.d/perdition:38 15.293 +#: ../../../perdition/stuff/etc/init.d/perdition:50 15.294 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:31 15.295 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:40 15.296 +#: ../../../portmap/stuff/init.d/portmap:46 15.297 +#: ../../../postfix/stuff/etc/init.d/postfix:29 15.298 +#: ../../../postfix/stuff/etc/init.d/postfix:38 15.299 +#: ../../../postfix/stuff/etc/init.d/postfix:49 15.300 +#: ../../../postgrey/stuff/etc/init.d/postgrey:42 15.301 +#: ../../../postgrey/stuff/etc/init.d/postgrey:51 15.302 +#: ../../../privoxy/stuff/daemon-privoxy:31 15.303 +#: ../../../privoxy/stuff/daemon-privoxy:41 15.304 +#: ../../../pure-ftpd/stuff/pure-ftpd:36 ../../../pure-ftpd/stuff/pure-ftpd:45 15.305 +#: ../../../rsync/stuff/etc/init.d/rsyncd:29 15.306 +#: ../../../rsync/stuff/etc/init.d/rsyncd:39 15.307 +#: ../../../samba/stuff/etc/init.d/samba:39 15.308 +#: ../../../samba/stuff/etc/init.d/samba:46 15.309 +#: ../../../samba/stuff/etc/init.d/samba:59 15.310 +#: ../../../slim/stuff/etc/init.d/slim:28 15.311 +#: ../../../slim/stuff/etc/init.d/slim:38 15.312 +#: ../../../smartmontools/stuff/etc/init.d/smartd:30 15.313 +#: ../../../smartmontools/stuff/etc/init.d/smartd:39 15.314 +#: ../../../squid/stuff/etc/init.d/squid:40 15.315 +#: ../../../squid/stuff/etc/init.d/squid:51 15.316 +#: ../../../squid/stuff/etc/init.d/squid:60 15.317 +#: ../../../thttpd/stuff/etc/init.d/thttpd:30 15.318 +#: ../../../thttpd/stuff/etc/init.d/thttpd:39 15.319 +#: ../../../tinc/stuff/etc/init.d/tinc:29 15.320 +#: ../../../tinc/stuff/etc/init.d/tinc:38 15.321 +#: ../../../tinyproxy/stuff/tinyproxy:24 ../../../tinyproxy/stuff/tinyproxy:34 15.322 +#: ../../../transmission-daemon/stuff/transmission-daemon:29 15.323 +#: ../../../transmission-daemon/stuff/transmission-daemon:39 15.324 +#: ../../../unfs3/stuff/etc/init.d/unfsd:38 15.325 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:27 15.326 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:36 15.327 +#: ../../../wicd/stuff/wicd:29 ../../../wicd/stuff/wicd:39 15.328 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:29 15.329 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:38 15.330 +#: ../../../x11vnc/stuff/x11vnc:26 ../../../x11vnc/stuff/x11vnc:35 15.331 +#: ../../../ypserv/stuff/ypserv:30 ../../../ypserv/stuff/ypserv:39 15.332 +msgid "%s is not running." 15.333 +msgstr "" 15.334 + 15.335 +#: ../daemon:67 ../../../acpid/stuff/init.d/acpid:32 15.336 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:35 15.337 +#: ../../../apache/stuff/apache:30 ../../../apache/stuff/apache:40 15.338 +#: ../../../at/stuff/atd:33 ../../../autofs/stuff/etc/init.d/autofs:33 15.339 +#: ../../../backuppc/stuff/etc/init.d/backuppc:34 15.340 +#: ../../../bind/stuff/etc/init.d/named:34 15.341 +#: ../../../boxbackup-client/stuff/bbackupd:32 15.342 +#: ../../../boxbackup-server/stuff/bbstored:32 15.343 +#: ../../../cherokee/stuff/cherokee:30 ../../../chillispot/stuff/chilli:33 15.344 +#: ../../../c_icap/stuff/c-icapd:33 ../../../clamav/stuff/daemon-clamd:32 15.345 +#: ../../../collectd/stuff/collectd:32 15.346 +#: ../../../connman/stuff/etc/init.d/connman:34 15.347 +#: ../../../cups/stuff/etc/init.d/cupsd:19 15.348 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:76 15.349 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:33 15.350 +#: ../../../dbus/stuff/etc/init.d/dbus:36 ../../../ddclient/stuff/ddclient:31 15.351 +#: ../../../dhcp/stuff/dhcpd:32 ../../../dhid/stuff/init.d/dhid:29 15.352 +#: ../../../distcc/stuff/distccd:50 15.353 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:32 15.354 +#: ../../../dovecot/stuff/init.d/dovecot:36 15.355 +#: ../../../dropbear/stuff/init.d/dropbear:47 15.356 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:28 15.357 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:38 15.358 +#: ../../../fcron/stuff/fcron:32 ../../../git/stuff/git-daemon:32 15.359 +#: ../../../gpm/stuff/etc/init.d/gpm:32 ../../../hal/stuff/etc/init.d/hald:30 15.360 +#: ../../../hostapd/stuff/hostapd:30 ../../../knock/stuff/etc/init.d/knock:34 15.361 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:30 15.362 +#: ../../../linux64-zram/stuff/compcache:33 15.363 +#: ../../../linux-zram/stuff/compcache:33 ../../../lxdm/stuff/init.d/lxdm:29 15.364 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:32 15.365 +#: ../../../mariadb/stuff/etc/init.d/mysql:50 15.366 +#: ../../../motion/stuff/init.d/motion:29 ../../../mpd/stuff/etc/init.d/mpd:32 15.367 +#: ../../../mysql/stuff/etc/init.d/mysql:50 ../../../nagios-nrpe/stuff/nrpe:37 15.368 +#: ../../../netatalk/stuff/etc/init.d/netatalk:61 15.369 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:61 15.370 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:48 15.371 +#: ../../../nginx/stuff/etc/init.d/nginx:30 15.372 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:30 ../../../nscd/stuff/nscd:36 15.373 +#: ../../../ntop/stuff/etc/init.d/ntop:42 ../../../ntp/stuff/ntp:34 15.374 +#: ../../../ofono/stuff/etc/init.d/ofono:34 15.375 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:50 15.376 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:34 15.377 +#: ../../../openldap/stuff/etc/init.d/openldap:38 15.378 +#: ../../../openssh/stuff/openssh:47 ../../../open-vm-tools/stuff/vmtoolsd:37 15.379 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:54 15.380 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:54 15.381 +#: ../../../partimage/stuff/etc/init.d/partimaged:43 15.382 +#: ../../../pcsc-lite/stuff/init.d/pcscd:29 15.383 +#: ../../../perdition/stuff/etc/init.d/perdition:41 15.384 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:34 15.385 +#: ../../../portmap/stuff/init.d/portmap:49 15.386 +#: ../../../postfix/stuff/etc/init.d/postfix:32 15.387 +#: ../../../postgresql/stuff/etc/init.d/postgresql:39 15.388 +#: ../../../postgrey/stuff/etc/init.d/postgrey:45 15.389 +#: ../../../privoxy/stuff/daemon-privoxy:34 15.390 +#: ../../../pure-ftpd/stuff/pure-ftpd:39 15.391 +#: ../../../rsync/stuff/etc/init.d/rsyncd:32 15.392 +#: ../../../samba/stuff/etc/init.d/samba:41 15.393 +#: ../../../samba/stuff/etc/init.d/samba:48 15.394 +#: ../../../slim/stuff/etc/init.d/slim:31 15.395 +#: ../../../smartmontools/stuff/etc/init.d/smartd:33 15.396 +#: ../../../squid/stuff/etc/init.d/squid:43 15.397 +#: ../../../thttpd/stuff/etc/init.d/thttpd:33 15.398 +#: ../../../tinc/stuff/etc/init.d/tinc:32 15.399 +#: ../../../tinyproxy/stuff/tinyproxy:27 15.400 +#: ../../../transmission-daemon/stuff/transmission-daemon:32 15.401 +#: ../../../unfs3/stuff/etc/init.d/unfsd:41 15.402 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:30 15.403 +#: ../../../wicd/stuff/wicd:32 15.404 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:32 15.405 +#: ../../../x11vnc/stuff/x11vnc:29 ../../../ypserv/stuff/ypserv:33 15.406 +msgid "Stopping %s: %s..." 15.407 +msgstr "" 15.408 + 15.409 +#: ../daemon:77 ../../../acpid/stuff/init.d/acpid:41 15.410 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:46 15.411 +#: ../../../apache/stuff/apache:49 ../../../at/stuff/atd:42 15.412 +#: ../../../autofs/stuff/etc/init.d/autofs:43 15.413 +#: ../../../backuppc/stuff/etc/init.d/backuppc:44 15.414 +#: ../../../bind/stuff/etc/init.d/named:47 15.415 +#: ../../../boxbackup-client/stuff/bbackupd:42 15.416 +#: ../../../boxbackup-server/stuff/bbstored:42 15.417 +#: ../../../cherokee/stuff/cherokee:39 ../../../chillispot/stuff/chilli:42 15.418 +#: ../../../c_icap/stuff/c-icapd:42 ../../../clamav/stuff/daemon-clamd:42 15.419 +#: ../../../collectd/stuff/collectd:41 15.420 +#: ../../../connman/stuff/etc/init.d/connman:44 15.421 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:86 15.422 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:42 15.423 +#: ../../../dbus/stuff/etc/init.d/dbus:47 ../../../ddclient/stuff/ddclient:41 15.424 +#: ../../../dhcp/stuff/dhcpd:41 ../../../dhid/stuff/init.d/dhid:39 15.425 +#: ../../../distcc/stuff/distccd:59 15.426 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:42 15.427 +#: ../../../dovecot/stuff/init.d/dovecot:45 15.428 +#: ../../../dropbear/stuff/init.d/dropbear:56 15.429 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:47 15.430 +#: ../../../fcron/stuff/fcron:41 ../../../git/stuff/git-daemon:41 15.431 +#: ../../../gpm/stuff/etc/init.d/gpm:41 ../../../hal/stuff/etc/init.d/hald:39 15.432 +#: ../../../hostapd/stuff/hostapd:39 ../../../knock/stuff/etc/init.d/knock:43 15.433 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:40 15.434 +#: ../../../lxdm/stuff/init.d/lxdm:38 15.435 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:42 15.436 +#: ../../../mariadb/stuff/etc/init.d/mysql:60 15.437 +#: ../../../motion/stuff/init.d/motion:39 ../../../mpd/stuff/etc/init.d/mpd:41 15.438 +#: ../../../mysql/stuff/etc/init.d/mysql:60 ../../../nagios/stuff/nagios:52 15.439 +#: ../../../nagios-nrpe/stuff/nrpe:46 15.440 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:63 15.441 +#: ../../../nginx/stuff/etc/init.d/nginx:40 15.442 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:40 ../../../nscd/stuff/nscd:46 15.443 +#: ../../../ntop/stuff/etc/init.d/ntop:51 ../../../ntp/stuff/ntp:44 15.444 +#: ../../../ofono/stuff/etc/init.d/ofono:44 15.445 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:60 15.446 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:43 15.447 +#: ../../../openldap/stuff/etc/init.d/openldap:47 15.448 +#: ../../../openssh/stuff/openssh:56 ../../../open-vm-tools/stuff/vmtoolsd:46 15.449 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:64 15.450 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:64 15.451 +#: ../../../perdition/stuff/etc/init.d/perdition:53 15.452 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:43 15.453 +#: ../../../postfix/stuff/etc/init.d/postfix:41 15.454 +#: ../../../postgresql/stuff/etc/init.d/postgresql:44 15.455 +#: ../../../postgrey/stuff/etc/init.d/postgrey:54 15.456 +#: ../../../privoxy/stuff/daemon-privoxy:47 15.457 +#: ../../../pure-ftpd/stuff/pure-ftpd:48 15.458 +#: ../../../rsync/stuff/etc/init.d/rsyncd:42 15.459 +#: ../../../slim/stuff/etc/init.d/slim:41 15.460 +#: ../../../smartmontools/stuff/etc/init.d/smartd:42 15.461 +#: ../../../squid/stuff/etc/init.d/squid:63 15.462 +#: ../../../thttpd/stuff/etc/init.d/thttpd:42 15.463 +#: ../../../tinc/stuff/etc/init.d/tinc:41 15.464 +#: ../../../tinyproxy/stuff/tinyproxy:37 15.465 +#: ../../../transmission-daemon/stuff/transmission-daemon:42 15.466 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:39 15.467 +#: ../../../wicd/stuff/wicd:42 15.468 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:41 15.469 +#: ../../../x11vnc/stuff/x11vnc:38 ../../../ypserv/stuff/ypserv:42 15.470 +msgid "Restarting %s: %s..." 15.471 +msgstr "" 15.472 + 15.473 +#: ../daemon:86 ../../../acpid/stuff/init.d/acpid:48 15.474 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:55 15.475 +#: ../../../apache/stuff/apache:54 ../../../at/stuff/atd:51 15.476 +#: ../../../autofs/stuff/etc/init.d/autofs:50 15.477 +#: ../../../backuppc/stuff/etc/init.d/backuppc:57 15.478 +#: ../../../bind/stuff/etc/init.d/named:54 15.479 +#: ../../../boxbackup-client/stuff/bbackupd:50 15.480 +#: ../../../boxbackup-server/stuff/bbstored:50 15.481 +#: ../../../cherokee/stuff/cherokee:47 ../../../chillispot/stuff/chilli:49 15.482 +#: ../../../c_icap/stuff/c-icapd:51 ../../../clamav/stuff/daemon-clamd:50 15.483 +#: ../../../collectd/stuff/collectd:48 15.484 +#: ../../../connman/stuff/etc/init.d/connman:59 15.485 +#: ../../../cups/stuff/etc/init.d/cupsd:35 15.486 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:98 15.487 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:49 15.488 +#: ../../../dbus/stuff/etc/init.d/dbus:55 ../../../ddclient/stuff/ddclient:49 15.489 +#: ../../../dhcp/stuff/dhcpd:48 ../../../dhid/stuff/init.d/dhid:47 15.490 +#: ../../../distcc/stuff/distccd:64 15.491 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:50 15.492 +#: ../../../dovecot/stuff/init.d/dovecot:52 15.493 +#: ../../../dropbear/stuff/init.d/dropbear:63 15.494 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:53 15.495 +#: ../../../fcron/stuff/fcron:48 ../../../git/stuff/git-daemon:48 15.496 +#: ../../../gpm/stuff/etc/init.d/gpm:48 ../../../hal/stuff/etc/init.d/hald:46 15.497 +#: ../../../hostapd/stuff/hostapd:46 ../../../knock/stuff/etc/init.d/knock:50 15.498 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:48 15.499 +#: ../../../linux64-zram/stuff/compcache:41 15.500 +#: ../../../linux-zram/stuff/compcache:41 ../../../lxdm/stuff/init.d/lxdm:45 15.501 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:51 15.502 +#: ../../../mariadb/stuff/etc/init.d/mysql:68 15.503 +#: ../../../motion/stuff/init.d/motion:47 ../../../mpd/stuff/etc/init.d/mpd:48 15.504 +#: ../../../mysql/stuff/etc/init.d/mysql:68 ../../../nagios/stuff/nagios:62 15.505 +#: ../../../nagios-nrpe/stuff/nrpe:53 15.506 +#: ../../../netatalk/stuff/etc/init.d/netatalk:74 15.507 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:74 15.508 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:77 15.509 +#: ../../../nginx/stuff/etc/init.d/nginx:48 15.510 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:48 ../../../nscd/stuff/nscd:54 15.511 +#: ../../../ntop/stuff/etc/init.d/ntop:58 ../../../ntp/stuff/ntp:51 15.512 +#: ../../../ofono/stuff/etc/init.d/ofono:52 15.513 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:68 15.514 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:50 15.515 +#: ../../../openldap/stuff/etc/init.d/openldap:54 15.516 +#: ../../../openssh/stuff/openssh:63 ../../../open-vm-tools/stuff/vmtoolsd:53 15.517 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:72 15.518 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:72 15.519 +#: ../../../partimage/stuff/etc/init.d/partimaged:53 15.520 +#: ../../../pcsc-lite/stuff/init.d/pcscd:38 15.521 +#: ../../../perdition/stuff/etc/init.d/perdition:70 15.522 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:52 15.523 +#: ../../../portmap/stuff/init.d/portmap:65 15.524 +#: ../../../postfix/stuff/etc/init.d/postfix:58 15.525 +#: ../../../postgresql/stuff/etc/init.d/postgresql:54 15.526 +#: ../../../postgrey/stuff/etc/init.d/postgrey:61 15.527 +#: ../../../privoxy/stuff/daemon-privoxy:52 15.528 +#: ../../../pure-ftpd/stuff/pure-ftpd:55 15.529 +#: ../../../rsync/stuff/etc/init.d/rsyncd:50 15.530 +#: ../../../samba/stuff/etc/init.d/samba:67 15.531 +#: ../../../slim/stuff/etc/init.d/slim:49 15.532 +#: ../../../smartmontools/stuff/etc/init.d/smartd:49 15.533 +#: ../../../squid/stuff/etc/init.d/squid:69 15.534 +#: ../../../thttpd/stuff/etc/init.d/thttpd:49 15.535 +#: ../../../tinc/stuff/etc/init.d/tinc:48 15.536 +#: ../../../tinyproxy/stuff/tinyproxy:45 15.537 +#: ../../../transmission-daemon/stuff/transmission-daemon:50 15.538 +#: ../../../unfs3/stuff/etc/init.d/unfsd:51 15.539 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:46 15.540 +#: ../../../wicd/stuff/wicd:50 15.541 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:48 15.542 +#: ../../../x11vnc/stuff/x11vnc:45 ../../../ypserv/stuff/ypserv:49 15.543 +msgid "Usage:" 15.544 +msgstr "" 15.545 + 15.546 +#: ../../../acpid/stuff/init.d/acpid:12 15.547 +msgid "ACPI event deamon" 15.548 +msgstr "" 15.549 + 15.550 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:12 15.551 +#: ../../../autofs/stuff/etc/init.d/autofs:12 15.552 +#: ../../../chillispot/stuff/chilli:12 ../../../c_icap/stuff/c-icapd:12 15.553 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:12 15.554 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:12 15.555 +#: ../../../dropbear/stuff/init.d/dropbear:12 15.556 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:10 15.557 +#: ../../../gpm/stuff/etc/init.d/gpm:12 15.558 +#: ../../../knock/stuff/etc/init.d/knock:12 15.559 +#: ../../../mariadb/stuff/etc/init.d/mysql:12 15.560 +#: ../../../mysql/stuff/etc/init.d/mysql:12 15.561 +#: ../../../ntop/stuff/etc/init.d/ntop:12 ../../../ntp/stuff/ntp:12 15.562 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:12 15.563 +#: ../../../openldap/stuff/etc/init.d/openldap:12 15.564 +#: ../../../openssh/stuff/openssh:12 15.565 +#: ../../../partimage/stuff/etc/init.d/partimaged:12 15.566 +#: ../../../postfix/stuff/etc/init.d/postfix:12 15.567 +#: ../../../postgresql/stuff/etc/init.d/postgresql:12 15.568 +#: ../../../samba/stuff/etc/init.d/samba:12 15.569 +#: ../../../thttpd/stuff/etc/init.d/thttpd:12 15.570 +#: ../../../unfs3/stuff/etc/init.d/unfsd:12 ../../../x11vnc/stuff/x11vnc:10 15.571 +#: ../../../ypserv/stuff/ypserv:12 15.572 +msgid "%s server" 15.573 +msgstr "" 15.574 + 15.575 +#: ../../../apache/stuff/apache:10 15.576 +msgid "Apache Web Server" 15.577 +msgstr "" 15.578 + 15.579 +#: ../../../boxbackup-server/stuff/bbstored:12 15.580 +msgid "BoxBackup server deamon" 15.581 +msgstr "" 15.582 + 15.583 +#: ../../../cherokee/stuff/cherokee:10 15.584 +msgid "Cherokee Web Server" 15.585 +msgstr "" 15.586 + 15.587 +#: ../../../collectd/stuff/collectd:12 15.588 +msgid "Statistics collection daemon" 15.589 +msgstr "" 15.590 + 15.591 +#: ../../../connman/stuff/etc/init.d/connman:13 15.592 +msgid "Connection Manager" 15.593 +msgstr "" 15.594 + 15.595 +#: ../../../connman/stuff/etc/init.d/connman:53 15.596 +msgid "%s is running." 15.597 +msgstr "" 15.598 + 15.599 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:26 15.600 +msgid "Initialize %s..." 15.601 +msgstr "" 15.602 + 15.603 +#: ../../../dbus/stuff/etc/init.d/dbus:10 15.604 +msgid "message bus daemon" 15.605 +msgstr "" 15.606 + 15.607 +#: ../../../ddclient/stuff/ddclient:11 15.608 +msgid "dynamic IP manager" 15.609 +msgstr "" 15.610 + 15.611 +#: ../../../dhid/stuff/init.d/dhid:9 15.612 +msgid "DHIS client daemon" 15.613 +msgstr "" 15.614 + 15.615 +#: ../../../dropbear/stuff/init.d/dropbear:21 15.616 +#: ../../../dropbear/stuff/init.d/dropbear:28 15.617 +msgid "Generating Dropbear %s key..." 15.618 +msgstr "" 15.619 + 15.620 +#: ../../../hal/stuff/etc/init.d/hald:10 15.621 +msgid "Hardware Abstraction Layer" 15.622 +msgstr "" 15.623 + 15.624 +#: ../../../hostapd/stuff/hostapd:10 15.625 +msgid "daemon for wireless software access points" 15.626 +msgstr "" 15.627 + 15.628 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:10 15.629 +#: ../../../nginx/stuff/etc/init.d/nginx:10 15.630 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:10 15.631 +msgid "web server" 15.632 +msgstr "" 15.633 + 15.634 +#: ../../../linux64-zram/stuff/compcache:19 15.635 +#: ../../../linux-zram/stuff/compcache:19 15.636 +msgid "Loading module..." 15.637 +msgstr "" 15.638 + 15.639 +#: ../../../linux64-zram/stuff/compcache:36 15.640 +#: ../../../linux-zram/stuff/compcache:36 15.641 +msgid "Unloading module..." 15.642 +msgstr "" 15.643 + 15.644 +#: ../../../lxdm/stuff/init.d/lxdm:11 15.645 +msgid "LXDE login manager" 15.646 +msgstr "" 15.647 + 15.648 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:12 15.649 +msgid "Network daemon" 15.650 +msgstr "" 15.651 + 15.652 +#: ../../../mariadb/stuff/etc/init.d/mysql:29 15.653 +#: ../../../mysql/stuff/etc/init.d/mysql:29 15.654 +msgid "Initializing %s..." 15.655 +msgstr "" 15.656 + 15.657 +#: ../../../mariadb/stuff/etc/init.d/mysql:40 15.658 +#: ../../../mysql/stuff/etc/init.d/mysql:40 15.659 +#: ../../../openldap/stuff/etc/init.d/openldap:28 15.660 +#: ../../../postgresql/stuff/etc/init.d/postgresql:31 15.661 +msgid "Running %s..." 15.662 +msgstr "" 15.663 + 15.664 +#: ../../../motion/stuff/init.d/motion:9 15.665 +msgid "Video detection daemon" 15.666 +msgstr "" 15.667 + 15.668 +#: ../../../mpd/stuff/etc/init.d/mpd:11 15.669 +msgid "Music Player Daemon" 15.670 +msgstr "" 15.671 + 15.672 +#: ../../../nagios/stuff/nagios:12 15.673 +msgid "Network Monitoring Server" 15.674 +msgstr "" 15.675 + 15.676 +#: ../../../netatalk/stuff/etc/init.d/netatalk:11 15.677 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:11 15.678 +msgid "Netatalk daemons" 15.679 +msgstr "" 15.680 + 15.681 +#: ../../../nscd/stuff/nscd:12 15.682 +msgid "name-server caching daemon" 15.683 +msgstr "" 15.684 + 15.685 +#: ../../../ofono/stuff/etc/init.d/ofono:13 15.686 +msgid "Mobile telephony Manager" 15.687 +msgstr "" 15.688 + 15.689 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:12 15.690 +msgid "openerp-web server" 15.691 +msgstr "" 15.692 + 15.693 +#: ../../../openssh/stuff/openssh:23 ../../../openssh/stuff/openssh:27 15.694 +#: ../../../openssh/stuff/openssh:31 15.695 +msgid "Generating OpenSSH %s key... " 15.696 +msgstr "" 15.697 + 15.698 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:20 15.699 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:20 15.700 +msgid "TUN/TAP support is not available in this Kernel" 15.701 +msgstr "" 15.702 + 15.703 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:25 15.704 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:25 15.705 +msgid "Detected broken %s symlink, fixing..." 15.706 +msgstr "" 15.707 + 15.708 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:38 15.709 +msgid "Missing OpenVPN client config." 15.710 +msgstr "" 15.711 + 15.712 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:38 15.713 +msgid "Missing OpenVPN server config." 15.714 +msgstr "" 15.715 + 15.716 +#: ../../../pcsc-lite/stuff/init.d/pcscd:10 15.717 +msgid "PC/SC smart card daemon" 15.718 +msgstr "" 15.719 + 15.720 +#: ../../../perdition/stuff/etc/init.d/perdition:13 15.721 +msgid "IMAP/POP3 proxy server" 15.722 +msgstr "" 15.723 + 15.724 +#: ../../../portmap/stuff/init.d/portmap:12 15.725 +msgid "RPC portmapper" 15.726 +msgstr "" 15.727 + 15.728 +#: ../../../portmap/stuff/init.d/portmap:37 15.729 +msgid "Restoring old RPC service information..." 15.730 +msgstr "" 15.731 + 15.732 +#: ../../../postgresql/stuff/etc/init.d/postgresql:21 15.733 +msgid "Initializing PostgreSQL server database" 15.734 +msgstr "" 15.735 + 15.736 +#: ../../../postgresql/stuff/etc/init.d/postgresql:49 15.737 +#: ../../../samba/stuff/etc/init.d/samba:62 15.738 +msgid "Reloading %s: %s..." 15.739 +msgstr "" 15.740 + 15.741 +#: ../../../postgrey/stuff/etc/init.d/postgrey:12 15.742 +msgid "Postfix Greylisting Policy Server" 15.743 +msgstr "" 15.744 + 15.745 +#: ../../../postgrey/stuff/etc/init.d/postgrey:25 15.746 +msgid "Updating %s" 15.747 +msgstr "" 15.748 + 15.749 +#: ../../../privoxy/stuff/daemon-privoxy:12 15.750 +msgid "Web proxy daemon" 15.751 +msgstr "" 15.752 + 15.753 +#: ../../../pure-ftpd/stuff/pure-ftpd:12 15.754 +msgid "pure-FTPd Server Daemon" 15.755 +msgstr "" 15.756 + 15.757 +#: ../../../slim/stuff/etc/init.d/slim:11 15.758 +msgid "Simple login manager" 15.759 +msgstr "" 15.760 + 15.761 +#: ../../../smartmontools/stuff/etc/init.d/smartd:12 15.762 +msgid "Smartmontools (SMART) Daemon" 15.763 +msgstr "" 15.764 + 15.765 +#: ../../../squid/stuff/etc/init.d/squid:12 15.766 +msgid "Squid proxy server" 15.767 +msgstr "" 15.768 + 15.769 +#: ../../../squid/stuff/etc/init.d/squid:29 15.770 +msgid "Creating squid spool directory structure" 15.771 +msgstr "" 15.772 + 15.773 +#: ../../../squid/stuff/etc/init.d/squid:54 15.774 +msgid "Reloading %s configuration..." 15.775 +msgstr "" 15.776 + 15.777 +#: ../../../tinyproxy/stuff/tinyproxy:7 15.778 +msgid "Tiny Proxy" 15.779 +msgstr "" 15.780 + 15.781 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:10 15.782 +msgid "VirtualBox Guest Service" 15.783 +msgstr "" 15.784 + 15.785 +#: ../../../wicd/stuff/wicd:12 15.786 +msgid "Network connection manager" 15.787 +msgstr ""
16.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 16.2 +++ b/busybox/stuff/po/ru.po Thu May 26 20:16:45 2016 +0300 16.3 @@ -0,0 +1,795 @@ 16.4 +# Russian translations for /etc/init.d/* daemons 16.5 +# Copyright (C) 2016 SliTaz 16.6 +# This file is distributed under the same license as the PACKAGE package. 16.7 +# Aleksej Bobylev <al.bobylev@gmail.com>, 2016. 16.8 +# 16.9 +msgid "" 16.10 +msgstr "" 16.11 +"Project-Id-Version: daemon\n" 16.12 +"Report-Msgid-Bugs-To: \n" 16.13 +"POT-Creation-Date: 2016-05-26 18:37+0300\n" 16.14 +"PO-Revision-Date: 2016-05-26 19:11+0300\n" 16.15 +"Last-Translator: Aleksej Bobylev <al.bobylev@gmail.com>\n" 16.16 +"Language-Team: \n" 16.17 +"Language: ru\n" 16.18 +"MIME-Version: 1.0\n" 16.19 +"Content-Type: text/plain; charset=UTF-8\n" 16.20 +"Content-Transfer-Encoding: 8bit\n" 16.21 +"X-Generator: Poedit 1.8.6\n" 16.22 +"X-Poedit-SourceCharset: UTF-8\n" 16.23 + 16.24 +#: ../daemon:11 ../../../at/stuff/atd:11 16.25 +#: ../../../backuppc/stuff/etc/init.d/backuppc:12 16.26 +#: ../../../bind/stuff/etc/init.d/named:12 16.27 +#: ../../../boxbackup-client/stuff/bbackupd:12 16.28 +#: ../../../clamav/stuff/daemon-clamd:12 16.29 +#: ../../../cups/stuff/etc/init.d/cupsd:12 ../../../dhcp/stuff/dhcpd:12 16.30 +#: ../../../distcc/stuff/distccd:23 16.31 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:12 16.32 +#: ../../../dovecot/stuff/init.d/dovecot:12 ../../../fcron/stuff/fcron:12 16.33 +#: ../../../git/stuff/git-daemon:12 ../../../linux64-zram/stuff/compcache:10 16.34 +#: ../../../linux-zram/stuff/compcache:10 ../../../nagios-nrpe/stuff/nrpe:12 16.35 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:11 16.36 +#: ../../../open-vm-tools/stuff/vmtoolsd:12 16.37 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:12 16.38 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:12 16.39 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:11 16.40 +#: ../../../rsync/stuff/etc/init.d/rsyncd:12 16.41 +#: ../../../tinc/stuff/etc/init.d/tinc:12 16.42 +#: ../../../transmission-daemon/stuff/transmission-daemon:12 16.43 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:12 16.44 +msgid "%s daemon" 16.45 +msgstr "служба %s" 16.46 + 16.47 +#: ../daemon:31 16.48 +msgid "%s is already active." 16.49 +msgstr "%s уже активен." 16.50 + 16.51 +#: ../daemon:39 16.52 +msgid "%s is not active." 16.53 +msgstr "%s неактивен." 16.54 + 16.55 +#: ../daemon:52 ../../../acpid/stuff/init.d/acpid:20 16.56 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:22 16.57 +#: ../../../apache/stuff/apache:18 ../../../at/stuff/atd:19 16.58 +#: ../../../autofs/stuff/etc/init.d/autofs:20 16.59 +#: ../../../backuppc/stuff/etc/init.d/backuppc:21 16.60 +#: ../../../bind/stuff/etc/init.d/named:22 16.61 +#: ../../../boxbackup-client/stuff/bbackupd:20 16.62 +#: ../../../boxbackup-server/stuff/bbstored:20 16.63 +#: ../../../cherokee/stuff/cherokee:18 ../../../chillispot/stuff/chilli:21 16.64 +#: ../../../c_icap/stuff/c-icapd:21 ../../../clamav/stuff/daemon-clamd:20 16.65 +#: ../../../collectd/stuff/collectd:20 16.66 +#: ../../../connman/stuff/etc/init.d/connman:21 16.67 +#: ../../../cups/stuff/etc/init.d/cupsd:31 16.68 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:21 16.69 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:21 16.70 +#: ../../../dbus/stuff/etc/init.d/dbus:23 ../../../ddclient/stuff/ddclient:19 16.71 +#: ../../../dhcp/stuff/dhcpd:20 ../../../dhid/stuff/init.d/dhid:17 16.72 +#: ../../../distcc/stuff/distccd:38 16.73 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:20 16.74 +#: ../../../dovecot/stuff/init.d/dovecot:24 16.75 +#: ../../../dropbear/stuff/init.d/dropbear:35 16.76 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:19 16.77 +#: ../../../fcron/stuff/fcron:20 ../../../git/stuff/git-daemon:20 16.78 +#: ../../../gpm/stuff/etc/init.d/gpm:20 ../../../hal/stuff/etc/init.d/hald:18 16.79 +#: ../../../hostapd/stuff/hostapd:18 ../../../knock/stuff/etc/init.d/knock:22 16.80 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:18 16.81 +#: ../../../linux64-zram/stuff/compcache:16 16.82 +#: ../../../linux-zram/stuff/compcache:16 ../../../lxdm/stuff/init.d/lxdm:18 16.83 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:19 16.84 +#: ../../../mariadb/stuff/etc/init.d/mysql:25 16.85 +#: ../../../motion/stuff/init.d/motion:16 16.86 +#: ../../../mpd/stuff/etc/init.d/mpd:19 16.87 +#: ../../../mysql/stuff/etc/init.d/mysql:25 ../../../nagios/stuff/nagios:30 16.88 +#: ../../../nagios-nrpe/stuff/nrpe:25 16.89 +#: ../../../netatalk/stuff/etc/init.d/netatalk:45 16.90 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:45 16.91 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:25 16.92 +#: ../../../nginx/stuff/etc/init.d/nginx:18 16.93 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:18 16.94 +#: ../../../nscd/stuff/nscd:23 ../../../ntop/stuff/etc/init.d/ntop:26 16.95 +#: ../../../ntp/stuff/ntp:21 ../../../ofono/stuff/etc/init.d/ofono:21 16.96 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:33 16.97 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:22 16.98 +#: ../../../openldap/stuff/etc/init.d/openldap:20 16.99 +#: ../../../openssh/stuff/openssh:35 ../../../open-vm-tools/stuff/vmtoolsd:20 16.100 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:42 16.101 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:42 16.102 +#: ../../../partimage/stuff/etc/init.d/partimaged:24 16.103 +#: ../../../pcsc-lite/stuff/init.d/pcscd:17 16.104 +#: ../../../perdition/stuff/etc/init.d/perdition:25 16.105 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:20 16.106 +#: ../../../portmap/stuff/init.d/portmap:23 16.107 +#: ../../../postfix/stuff/etc/init.d/postfix:20 16.108 +#: ../../../postgrey/stuff/etc/init.d/postgrey:21 16.109 +#: ../../../privoxy/stuff/daemon-privoxy:22 16.110 +#: ../../../pure-ftpd/stuff/pure-ftpd:27 16.111 +#: ../../../rsync/stuff/etc/init.d/rsyncd:20 16.112 +#: ../../../samba/stuff/etc/init.d/samba:23 16.113 +#: ../../../samba/stuff/etc/init.d/samba:30 16.114 +#: ../../../slim/stuff/etc/init.d/slim:19 16.115 +#: ../../../smartmontools/stuff/etc/init.d/smartd:21 16.116 +#: ../../../squid/stuff/etc/init.d/squid:23 16.117 +#: ../../../thttpd/stuff/etc/init.d/thttpd:21 16.118 +#: ../../../tinc/stuff/etc/init.d/tinc:20 16.119 +#: ../../../tinyproxy/stuff/tinyproxy:15 16.120 +#: ../../../transmission-daemon/stuff/transmission-daemon:20 16.121 +#: ../../../unfs3/stuff/etc/init.d/unfsd:23 16.122 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:18 16.123 +#: ../../../wicd/stuff/wicd:20 16.124 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:20 16.125 +#: ../../../x11vnc/stuff/x11vnc:17 ../../../ypserv/stuff/ypserv:20 16.126 +msgid "%s is already running." 16.127 +msgstr "%s уже запущен." 16.128 + 16.129 +#: ../daemon:55 ../../../acpid/stuff/init.d/acpid:23 16.130 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:25 16.131 +#: ../../../apache/stuff/apache:21 ../../../at/stuff/atd:22 16.132 +#: ../../../autofs/stuff/etc/init.d/autofs:23 16.133 +#: ../../../backuppc/stuff/etc/init.d/backuppc:24 16.134 +#: ../../../bind/stuff/etc/init.d/named:25 16.135 +#: ../../../boxbackup-client/stuff/bbackupd:23 16.136 +#: ../../../boxbackup-server/stuff/bbstored:23 16.137 +#: ../../../cherokee/stuff/cherokee:21 ../../../chillispot/stuff/chilli:24 16.138 +#: ../../../c_icap/stuff/c-icapd:24 ../../../clamav/stuff/daemon-clamd:23 16.139 +#: ../../../collectd/stuff/collectd:23 16.140 +#: ../../../connman/stuff/etc/init.d/connman:25 16.141 +#: ../../../cups/stuff/etc/init.d/cupsd:27 16.142 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:66 16.143 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:24 16.144 +#: ../../../dbus/stuff/etc/init.d/dbus:27 ../../../ddclient/stuff/ddclient:22 16.145 +#: ../../../dhcp/stuff/dhcpd:23 ../../../dhid/stuff/init.d/dhid:20 16.146 +#: ../../../distcc/stuff/distccd:41 16.147 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:23 16.148 +#: ../../../dovecot/stuff/init.d/dovecot:27 16.149 +#: ../../../dropbear/stuff/init.d/dropbear:38 16.150 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:22 16.151 +#: ../../../fcron/stuff/fcron:23 ../../../git/stuff/git-daemon:23 16.152 +#: ../../../gpm/stuff/etc/init.d/gpm:23 ../../../hal/stuff/etc/init.d/hald:21 16.153 +#: ../../../hostapd/stuff/hostapd:21 ../../../knock/stuff/etc/init.d/knock:25 16.154 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:21 16.155 +#: ../../../linux64-zram/stuff/compcache:24 16.156 +#: ../../../linux-zram/stuff/compcache:24 ../../../lxdm/stuff/init.d/lxdm:21 16.157 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:22 16.158 +#: ../../../mariadb/stuff/etc/init.d/mysql:34 16.159 +#: ../../../motion/stuff/init.d/motion:19 16.160 +#: ../../../mpd/stuff/etc/init.d/mpd:22 16.161 +#: ../../../mysql/stuff/etc/init.d/mysql:34 ../../../nagios/stuff/nagios:33 16.162 +#: ../../../nagios-nrpe/stuff/nrpe:28 16.163 +#: ../../../netatalk/stuff/etc/init.d/netatalk:48 16.164 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:48 16.165 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:28 16.166 +#: ../../../nginx/stuff/etc/init.d/nginx:21 16.167 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:21 16.168 +#: ../../../nscd/stuff/nscd:26 ../../../ntop/stuff/etc/init.d/ntop:33 16.169 +#: ../../../ntp/stuff/ntp:24 ../../../ofono/stuff/etc/init.d/ofono:24 16.170 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:36 16.171 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:25 16.172 +#: ../../../openldap/stuff/etc/init.d/openldap:23 16.173 +#: ../../../openssh/stuff/openssh:38 ../../../open-vm-tools/stuff/vmtoolsd:23 16.174 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:45 16.175 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:45 16.176 +#: ../../../partimage/stuff/etc/init.d/partimaged:29 16.177 +#: ../../../pcsc-lite/stuff/init.d/pcscd:20 16.178 +#: ../../../perdition/stuff/etc/init.d/perdition:28 16.179 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:23 16.180 +#: ../../../portmap/stuff/init.d/portmap:27 16.181 +#: ../../../postfix/stuff/etc/init.d/postfix:23 16.182 +#: ../../../postgresql/stuff/etc/init.d/postgresql:25 16.183 +#: ../../../postgrey/stuff/etc/init.d/postgrey:36 16.184 +#: ../../../privoxy/stuff/daemon-privoxy:25 16.185 +#: ../../../pure-ftpd/stuff/pure-ftpd:30 16.186 +#: ../../../rsync/stuff/etc/init.d/rsyncd:23 16.187 +#: ../../../samba/stuff/etc/init.d/samba:25 16.188 +#: ../../../samba/stuff/etc/init.d/samba:32 16.189 +#: ../../../slim/stuff/etc/init.d/slim:22 16.190 +#: ../../../smartmontools/stuff/etc/init.d/smartd:24 16.191 +#: ../../../squid/stuff/etc/init.d/squid:33 16.192 +#: ../../../thttpd/stuff/etc/init.d/thttpd:24 16.193 +#: ../../../tinc/stuff/etc/init.d/tinc:23 16.194 +#: ../../../tinyproxy/stuff/tinyproxy:18 16.195 +#: ../../../transmission-daemon/stuff/transmission-daemon:23 16.196 +#: ../../../unfs3/stuff/etc/init.d/unfsd:27 16.197 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:21 16.198 +#: ../../../wicd/stuff/wicd:23 16.199 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:23 16.200 +#: ../../../x11vnc/stuff/x11vnc:20 ../../../ypserv/stuff/ypserv:23 16.201 +msgid "Starting %s: %s..." 16.202 +msgstr "Запускается %s: %s…" 16.203 + 16.204 +#: ../daemon:64 ../daemon:74 ../../../acpid/stuff/init.d/acpid:29 16.205 +#: ../../../acpid/stuff/init.d/acpid:38 16.206 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:32 16.207 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:43 16.208 +#: ../../../apache/stuff/apache:27 ../../../apache/stuff/apache:37 16.209 +#: ../../../apache/stuff/apache:46 ../../../at/stuff/atd:30 16.210 +#: ../../../at/stuff/atd:39 ../../../autofs/stuff/etc/init.d/autofs:30 16.211 +#: ../../../autofs/stuff/etc/init.d/autofs:40 16.212 +#: ../../../backuppc/stuff/etc/init.d/backuppc:31 16.213 +#: ../../../backuppc/stuff/etc/init.d/backuppc:41 16.214 +#: ../../../bind/stuff/etc/init.d/named:31 16.215 +#: ../../../bind/stuff/etc/init.d/named:44 16.216 +#: ../../../boxbackup-client/stuff/bbackupd:29 16.217 +#: ../../../boxbackup-client/stuff/bbackupd:39 16.218 +#: ../../../boxbackup-server/stuff/bbstored:29 16.219 +#: ../../../boxbackup-server/stuff/bbstored:39 16.220 +#: ../../../cherokee/stuff/cherokee:27 ../../../cherokee/stuff/cherokee:36 16.221 +#: ../../../chillispot/stuff/chilli:30 ../../../chillispot/stuff/chilli:39 16.222 +#: ../../../c_icap/stuff/c-icapd:30 ../../../c_icap/stuff/c-icapd:39 16.223 +#: ../../../clamav/stuff/daemon-clamd:29 16.224 +#: ../../../clamav/stuff/daemon-clamd:39 ../../../collectd/stuff/collectd:29 16.225 +#: ../../../collectd/stuff/collectd:38 16.226 +#: ../../../connman/stuff/etc/init.d/connman:31 16.227 +#: ../../../connman/stuff/etc/init.d/connman:41 16.228 +#: ../../../connman/stuff/etc/init.d/connman:55 16.229 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:73 16.230 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:83 16.231 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:30 16.232 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:39 16.233 +#: ../../../dbus/stuff/etc/init.d/dbus:33 16.234 +#: ../../../dbus/stuff/etc/init.d/dbus:43 ../../../ddclient/stuff/ddclient:28 16.235 +#: ../../../ddclient/stuff/ddclient:38 ../../../dhcp/stuff/dhcpd:29 16.236 +#: ../../../dhcp/stuff/dhcpd:38 ../../../dhid/stuff/init.d/dhid:26 16.237 +#: ../../../dhid/stuff/init.d/dhid:36 ../../../distcc/stuff/distccd:47 16.238 +#: ../../../distcc/stuff/distccd:56 16.239 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:29 16.240 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:39 16.241 +#: ../../../dovecot/stuff/init.d/dovecot:33 16.242 +#: ../../../dovecot/stuff/init.d/dovecot:42 16.243 +#: ../../../dropbear/stuff/init.d/dropbear:44 16.244 +#: ../../../dropbear/stuff/init.d/dropbear:53 16.245 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:35 16.246 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:44 16.247 +#: ../../../fcron/stuff/fcron:29 ../../../fcron/stuff/fcron:38 16.248 +#: ../../../git/stuff/git-daemon:29 ../../../git/stuff/git-daemon:38 16.249 +#: ../../../gpm/stuff/etc/init.d/gpm:29 ../../../gpm/stuff/etc/init.d/gpm:38 16.250 +#: ../../../hal/stuff/etc/init.d/hald:27 16.251 +#: ../../../hal/stuff/etc/init.d/hald:36 ../../../hostapd/stuff/hostapd:27 16.252 +#: ../../../hostapd/stuff/hostapd:36 ../../../knock/stuff/etc/init.d/knock:31 16.253 +#: ../../../knock/stuff/etc/init.d/knock:40 16.254 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:27 16.255 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:37 16.256 +#: ../../../linux64-zram/stuff/compcache:30 16.257 +#: ../../../linux-zram/stuff/compcache:30 ../../../lxdm/stuff/init.d/lxdm:26 16.258 +#: ../../../lxdm/stuff/init.d/lxdm:35 16.259 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:29 16.260 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:39 16.261 +#: ../../../mariadb/stuff/etc/init.d/mysql:47 16.262 +#: ../../../mariadb/stuff/etc/init.d/mysql:57 16.263 +#: ../../../motion/stuff/init.d/motion:26 16.264 +#: ../../../mpd/stuff/etc/init.d/mpd:29 ../../../mpd/stuff/etc/init.d/mpd:38 16.265 +#: ../../../mysql/stuff/etc/init.d/mysql:47 16.266 +#: ../../../mysql/stuff/etc/init.d/mysql:57 ../../../nagios/stuff/nagios:40 16.267 +#: ../../../nagios/stuff/nagios:49 ../../../nagios-nrpe/stuff/nrpe:34 16.268 +#: ../../../nagios-nrpe/stuff/nrpe:43 16.269 +#: ../../../netatalk/stuff/etc/init.d/netatalk:58 16.270 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:58 16.271 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:45 16.272 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:60 16.273 +#: ../../../nginx/stuff/etc/init.d/nginx:27 16.274 +#: ../../../nginx/stuff/etc/init.d/nginx:37 16.275 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:27 16.276 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:37 16.277 +#: ../../../nscd/stuff/nscd:33 ../../../nscd/stuff/nscd:43 16.278 +#: ../../../ntop/stuff/etc/init.d/ntop:39 16.279 +#: ../../../ntop/stuff/etc/init.d/ntop:48 ../../../ntp/stuff/ntp:31 16.280 +#: ../../../ntp/stuff/ntp:41 ../../../ofono/stuff/etc/init.d/ofono:31 16.281 +#: ../../../ofono/stuff/etc/init.d/ofono:41 16.282 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:47 16.283 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:57 16.284 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:31 16.285 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:40 16.286 +#: ../../../openldap/stuff/etc/init.d/openldap:35 16.287 +#: ../../../openldap/stuff/etc/init.d/openldap:44 16.288 +#: ../../../openssh/stuff/openssh:44 ../../../openssh/stuff/openssh:53 16.289 +#: ../../../open-vm-tools/stuff/vmtoolsd:34 16.290 +#: ../../../open-vm-tools/stuff/vmtoolsd:43 16.291 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:51 16.292 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:61 16.293 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:51 16.294 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:61 16.295 +#: ../../../partimage/stuff/etc/init.d/partimaged:40 16.296 +#: ../../../pcsc-lite/stuff/init.d/pcscd:26 16.297 +#: ../../../perdition/stuff/etc/init.d/perdition:38 16.298 +#: ../../../perdition/stuff/etc/init.d/perdition:50 16.299 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:31 16.300 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:40 16.301 +#: ../../../portmap/stuff/init.d/portmap:46 16.302 +#: ../../../postfix/stuff/etc/init.d/postfix:29 16.303 +#: ../../../postfix/stuff/etc/init.d/postfix:38 16.304 +#: ../../../postfix/stuff/etc/init.d/postfix:49 16.305 +#: ../../../postgrey/stuff/etc/init.d/postgrey:42 16.306 +#: ../../../postgrey/stuff/etc/init.d/postgrey:51 16.307 +#: ../../../privoxy/stuff/daemon-privoxy:31 16.308 +#: ../../../privoxy/stuff/daemon-privoxy:41 16.309 +#: ../../../pure-ftpd/stuff/pure-ftpd:36 16.310 +#: ../../../pure-ftpd/stuff/pure-ftpd:45 16.311 +#: ../../../rsync/stuff/etc/init.d/rsyncd:29 16.312 +#: ../../../rsync/stuff/etc/init.d/rsyncd:39 16.313 +#: ../../../samba/stuff/etc/init.d/samba:39 16.314 +#: ../../../samba/stuff/etc/init.d/samba:46 16.315 +#: ../../../samba/stuff/etc/init.d/samba:59 16.316 +#: ../../../slim/stuff/etc/init.d/slim:28 16.317 +#: ../../../slim/stuff/etc/init.d/slim:38 16.318 +#: ../../../smartmontools/stuff/etc/init.d/smartd:30 16.319 +#: ../../../smartmontools/stuff/etc/init.d/smartd:39 16.320 +#: ../../../squid/stuff/etc/init.d/squid:40 16.321 +#: ../../../squid/stuff/etc/init.d/squid:51 16.322 +#: ../../../squid/stuff/etc/init.d/squid:60 16.323 +#: ../../../thttpd/stuff/etc/init.d/thttpd:30 16.324 +#: ../../../thttpd/stuff/etc/init.d/thttpd:39 16.325 +#: ../../../tinc/stuff/etc/init.d/tinc:29 16.326 +#: ../../../tinc/stuff/etc/init.d/tinc:38 16.327 +#: ../../../tinyproxy/stuff/tinyproxy:24 16.328 +#: ../../../tinyproxy/stuff/tinyproxy:34 16.329 +#: ../../../transmission-daemon/stuff/transmission-daemon:29 16.330 +#: ../../../transmission-daemon/stuff/transmission-daemon:39 16.331 +#: ../../../unfs3/stuff/etc/init.d/unfsd:38 16.332 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:27 16.333 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:36 16.334 +#: ../../../wicd/stuff/wicd:29 ../../../wicd/stuff/wicd:39 16.335 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:29 16.336 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:38 16.337 +#: ../../../x11vnc/stuff/x11vnc:26 ../../../x11vnc/stuff/x11vnc:35 16.338 +#: ../../../ypserv/stuff/ypserv:30 ../../../ypserv/stuff/ypserv:39 16.339 +msgid "%s is not running." 16.340 +msgstr "%s не запущен." 16.341 + 16.342 +#: ../daemon:67 ../../../acpid/stuff/init.d/acpid:32 16.343 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:35 16.344 +#: ../../../apache/stuff/apache:30 ../../../apache/stuff/apache:40 16.345 +#: ../../../at/stuff/atd:33 ../../../autofs/stuff/etc/init.d/autofs:33 16.346 +#: ../../../backuppc/stuff/etc/init.d/backuppc:34 16.347 +#: ../../../bind/stuff/etc/init.d/named:34 16.348 +#: ../../../boxbackup-client/stuff/bbackupd:32 16.349 +#: ../../../boxbackup-server/stuff/bbstored:32 16.350 +#: ../../../cherokee/stuff/cherokee:30 ../../../chillispot/stuff/chilli:33 16.351 +#: ../../../c_icap/stuff/c-icapd:33 ../../../clamav/stuff/daemon-clamd:32 16.352 +#: ../../../collectd/stuff/collectd:32 16.353 +#: ../../../connman/stuff/etc/init.d/connman:34 16.354 +#: ../../../cups/stuff/etc/init.d/cupsd:19 16.355 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:76 16.356 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:33 16.357 +#: ../../../dbus/stuff/etc/init.d/dbus:36 ../../../ddclient/stuff/ddclient:31 16.358 +#: ../../../dhcp/stuff/dhcpd:32 ../../../dhid/stuff/init.d/dhid:29 16.359 +#: ../../../distcc/stuff/distccd:50 16.360 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:32 16.361 +#: ../../../dovecot/stuff/init.d/dovecot:36 16.362 +#: ../../../dropbear/stuff/init.d/dropbear:47 16.363 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:28 16.364 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:38 16.365 +#: ../../../fcron/stuff/fcron:32 ../../../git/stuff/git-daemon:32 16.366 +#: ../../../gpm/stuff/etc/init.d/gpm:32 ../../../hal/stuff/etc/init.d/hald:30 16.367 +#: ../../../hostapd/stuff/hostapd:30 ../../../knock/stuff/etc/init.d/knock:34 16.368 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:30 16.369 +#: ../../../linux64-zram/stuff/compcache:33 16.370 +#: ../../../linux-zram/stuff/compcache:33 ../../../lxdm/stuff/init.d/lxdm:29 16.371 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:32 16.372 +#: ../../../mariadb/stuff/etc/init.d/mysql:50 16.373 +#: ../../../motion/stuff/init.d/motion:29 16.374 +#: ../../../mpd/stuff/etc/init.d/mpd:32 16.375 +#: ../../../mysql/stuff/etc/init.d/mysql:50 16.376 +#: ../../../nagios-nrpe/stuff/nrpe:37 16.377 +#: ../../../netatalk/stuff/etc/init.d/netatalk:61 16.378 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:61 16.379 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:48 16.380 +#: ../../../nginx/stuff/etc/init.d/nginx:30 16.381 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:30 16.382 +#: ../../../nscd/stuff/nscd:36 ../../../ntop/stuff/etc/init.d/ntop:42 16.383 +#: ../../../ntp/stuff/ntp:34 ../../../ofono/stuff/etc/init.d/ofono:34 16.384 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:50 16.385 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:34 16.386 +#: ../../../openldap/stuff/etc/init.d/openldap:38 16.387 +#: ../../../openssh/stuff/openssh:47 ../../../open-vm-tools/stuff/vmtoolsd:37 16.388 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:54 16.389 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:54 16.390 +#: ../../../partimage/stuff/etc/init.d/partimaged:43 16.391 +#: ../../../pcsc-lite/stuff/init.d/pcscd:29 16.392 +#: ../../../perdition/stuff/etc/init.d/perdition:41 16.393 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:34 16.394 +#: ../../../portmap/stuff/init.d/portmap:49 16.395 +#: ../../../postfix/stuff/etc/init.d/postfix:32 16.396 +#: ../../../postgresql/stuff/etc/init.d/postgresql:39 16.397 +#: ../../../postgrey/stuff/etc/init.d/postgrey:45 16.398 +#: ../../../privoxy/stuff/daemon-privoxy:34 16.399 +#: ../../../pure-ftpd/stuff/pure-ftpd:39 16.400 +#: ../../../rsync/stuff/etc/init.d/rsyncd:32 16.401 +#: ../../../samba/stuff/etc/init.d/samba:41 16.402 +#: ../../../samba/stuff/etc/init.d/samba:48 16.403 +#: ../../../slim/stuff/etc/init.d/slim:31 16.404 +#: ../../../smartmontools/stuff/etc/init.d/smartd:33 16.405 +#: ../../../squid/stuff/etc/init.d/squid:43 16.406 +#: ../../../thttpd/stuff/etc/init.d/thttpd:33 16.407 +#: ../../../tinc/stuff/etc/init.d/tinc:32 16.408 +#: ../../../tinyproxy/stuff/tinyproxy:27 16.409 +#: ../../../transmission-daemon/stuff/transmission-daemon:32 16.410 +#: ../../../unfs3/stuff/etc/init.d/unfsd:41 16.411 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:30 16.412 +#: ../../../wicd/stuff/wicd:32 16.413 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:32 16.414 +#: ../../../x11vnc/stuff/x11vnc:29 ../../../ypserv/stuff/ypserv:33 16.415 +msgid "Stopping %s: %s..." 16.416 +msgstr "Останавливается %s: %s…" 16.417 + 16.418 +#: ../daemon:77 ../../../acpid/stuff/init.d/acpid:41 16.419 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:46 16.420 +#: ../../../apache/stuff/apache:49 ../../../at/stuff/atd:42 16.421 +#: ../../../autofs/stuff/etc/init.d/autofs:43 16.422 +#: ../../../backuppc/stuff/etc/init.d/backuppc:44 16.423 +#: ../../../bind/stuff/etc/init.d/named:47 16.424 +#: ../../../boxbackup-client/stuff/bbackupd:42 16.425 +#: ../../../boxbackup-server/stuff/bbstored:42 16.426 +#: ../../../cherokee/stuff/cherokee:39 ../../../chillispot/stuff/chilli:42 16.427 +#: ../../../c_icap/stuff/c-icapd:42 ../../../clamav/stuff/daemon-clamd:42 16.428 +#: ../../../collectd/stuff/collectd:41 16.429 +#: ../../../connman/stuff/etc/init.d/connman:44 16.430 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:86 16.431 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:42 16.432 +#: ../../../dbus/stuff/etc/init.d/dbus:47 ../../../ddclient/stuff/ddclient:41 16.433 +#: ../../../dhcp/stuff/dhcpd:41 ../../../dhid/stuff/init.d/dhid:39 16.434 +#: ../../../distcc/stuff/distccd:59 16.435 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:42 16.436 +#: ../../../dovecot/stuff/init.d/dovecot:45 16.437 +#: ../../../dropbear/stuff/init.d/dropbear:56 16.438 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:47 16.439 +#: ../../../fcron/stuff/fcron:41 ../../../git/stuff/git-daemon:41 16.440 +#: ../../../gpm/stuff/etc/init.d/gpm:41 ../../../hal/stuff/etc/init.d/hald:39 16.441 +#: ../../../hostapd/stuff/hostapd:39 ../../../knock/stuff/etc/init.d/knock:43 16.442 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:40 16.443 +#: ../../../lxdm/stuff/init.d/lxdm:38 16.444 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:42 16.445 +#: ../../../mariadb/stuff/etc/init.d/mysql:60 16.446 +#: ../../../motion/stuff/init.d/motion:39 16.447 +#: ../../../mpd/stuff/etc/init.d/mpd:41 16.448 +#: ../../../mysql/stuff/etc/init.d/mysql:60 ../../../nagios/stuff/nagios:52 16.449 +#: ../../../nagios-nrpe/stuff/nrpe:46 16.450 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:63 16.451 +#: ../../../nginx/stuff/etc/init.d/nginx:40 16.452 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:40 16.453 +#: ../../../nscd/stuff/nscd:46 ../../../ntop/stuff/etc/init.d/ntop:51 16.454 +#: ../../../ntp/stuff/ntp:44 ../../../ofono/stuff/etc/init.d/ofono:44 16.455 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:60 16.456 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:43 16.457 +#: ../../../openldap/stuff/etc/init.d/openldap:47 16.458 +#: ../../../openssh/stuff/openssh:56 ../../../open-vm-tools/stuff/vmtoolsd:46 16.459 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:64 16.460 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:64 16.461 +#: ../../../perdition/stuff/etc/init.d/perdition:53 16.462 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:43 16.463 +#: ../../../postfix/stuff/etc/init.d/postfix:41 16.464 +#: ../../../postgresql/stuff/etc/init.d/postgresql:44 16.465 +#: ../../../postgrey/stuff/etc/init.d/postgrey:54 16.466 +#: ../../../privoxy/stuff/daemon-privoxy:47 16.467 +#: ../../../pure-ftpd/stuff/pure-ftpd:48 16.468 +#: ../../../rsync/stuff/etc/init.d/rsyncd:42 16.469 +#: ../../../slim/stuff/etc/init.d/slim:41 16.470 +#: ../../../smartmontools/stuff/etc/init.d/smartd:42 16.471 +#: ../../../squid/stuff/etc/init.d/squid:63 16.472 +#: ../../../thttpd/stuff/etc/init.d/thttpd:42 16.473 +#: ../../../tinc/stuff/etc/init.d/tinc:41 16.474 +#: ../../../tinyproxy/stuff/tinyproxy:37 16.475 +#: ../../../transmission-daemon/stuff/transmission-daemon:42 16.476 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:39 16.477 +#: ../../../wicd/stuff/wicd:42 16.478 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:41 16.479 +#: ../../../x11vnc/stuff/x11vnc:38 ../../../ypserv/stuff/ypserv:42 16.480 +msgid "Restarting %s: %s..." 16.481 +msgstr "Перезапускается %s: %s…" 16.482 + 16.483 +#: ../daemon:86 ../../../acpid/stuff/init.d/acpid:48 16.484 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:55 16.485 +#: ../../../apache/stuff/apache:54 ../../../at/stuff/atd:51 16.486 +#: ../../../autofs/stuff/etc/init.d/autofs:50 16.487 +#: ../../../backuppc/stuff/etc/init.d/backuppc:57 16.488 +#: ../../../bind/stuff/etc/init.d/named:54 16.489 +#: ../../../boxbackup-client/stuff/bbackupd:50 16.490 +#: ../../../boxbackup-server/stuff/bbstored:50 16.491 +#: ../../../cherokee/stuff/cherokee:47 ../../../chillispot/stuff/chilli:49 16.492 +#: ../../../c_icap/stuff/c-icapd:51 ../../../clamav/stuff/daemon-clamd:50 16.493 +#: ../../../collectd/stuff/collectd:48 16.494 +#: ../../../connman/stuff/etc/init.d/connman:59 16.495 +#: ../../../cups/stuff/etc/init.d/cupsd:35 16.496 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:98 16.497 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:49 16.498 +#: ../../../dbus/stuff/etc/init.d/dbus:55 ../../../ddclient/stuff/ddclient:49 16.499 +#: ../../../dhcp/stuff/dhcpd:48 ../../../dhid/stuff/init.d/dhid:47 16.500 +#: ../../../distcc/stuff/distccd:64 16.501 +#: ../../../dnsmasq/stuff/etc/init.d/dnsmasq:50 16.502 +#: ../../../dovecot/stuff/init.d/dovecot:52 16.503 +#: ../../../dropbear/stuff/init.d/dropbear:63 16.504 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:53 16.505 +#: ../../../fcron/stuff/fcron:48 ../../../git/stuff/git-daemon:48 16.506 +#: ../../../gpm/stuff/etc/init.d/gpm:48 ../../../hal/stuff/etc/init.d/hald:46 16.507 +#: ../../../hostapd/stuff/hostapd:46 ../../../knock/stuff/etc/init.d/knock:50 16.508 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:48 16.509 +#: ../../../linux64-zram/stuff/compcache:41 16.510 +#: ../../../linux-zram/stuff/compcache:41 ../../../lxdm/stuff/init.d/lxdm:45 16.511 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:51 16.512 +#: ../../../mariadb/stuff/etc/init.d/mysql:68 16.513 +#: ../../../motion/stuff/init.d/motion:47 16.514 +#: ../../../mpd/stuff/etc/init.d/mpd:48 16.515 +#: ../../../mysql/stuff/etc/init.d/mysql:68 ../../../nagios/stuff/nagios:62 16.516 +#: ../../../nagios-nrpe/stuff/nrpe:53 16.517 +#: ../../../netatalk/stuff/etc/init.d/netatalk:74 16.518 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:74 16.519 +#: ../../../nfs-utils/stuff/etc/init.d/nfsd:77 16.520 +#: ../../../nginx/stuff/etc/init.d/nginx:48 16.521 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:48 16.522 +#: ../../../nscd/stuff/nscd:54 ../../../ntop/stuff/etc/init.d/ntop:58 16.523 +#: ../../../ntp/stuff/ntp:51 ../../../ofono/stuff/etc/init.d/ofono:52 16.524 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:68 16.525 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:50 16.526 +#: ../../../openldap/stuff/etc/init.d/openldap:54 16.527 +#: ../../../openssh/stuff/openssh:63 ../../../open-vm-tools/stuff/vmtoolsd:53 16.528 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:72 16.529 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:72 16.530 +#: ../../../partimage/stuff/etc/init.d/partimaged:53 16.531 +#: ../../../pcsc-lite/stuff/init.d/pcscd:38 16.532 +#: ../../../perdition/stuff/etc/init.d/perdition:70 16.533 +#: ../../../phpvirtualbox/stuff/etc/init.d/vboxwebsrv:52 16.534 +#: ../../../portmap/stuff/init.d/portmap:65 16.535 +#: ../../../postfix/stuff/etc/init.d/postfix:58 16.536 +#: ../../../postgresql/stuff/etc/init.d/postgresql:54 16.537 +#: ../../../postgrey/stuff/etc/init.d/postgrey:61 16.538 +#: ../../../privoxy/stuff/daemon-privoxy:52 16.539 +#: ../../../pure-ftpd/stuff/pure-ftpd:55 16.540 +#: ../../../rsync/stuff/etc/init.d/rsyncd:50 16.541 +#: ../../../samba/stuff/etc/init.d/samba:67 16.542 +#: ../../../slim/stuff/etc/init.d/slim:49 16.543 +#: ../../../smartmontools/stuff/etc/init.d/smartd:49 16.544 +#: ../../../squid/stuff/etc/init.d/squid:69 16.545 +#: ../../../thttpd/stuff/etc/init.d/thttpd:49 16.546 +#: ../../../tinc/stuff/etc/init.d/tinc:48 16.547 +#: ../../../tinyproxy/stuff/tinyproxy:45 16.548 +#: ../../../transmission-daemon/stuff/transmission-daemon:50 16.549 +#: ../../../unfs3/stuff/etc/init.d/unfsd:51 16.550 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:46 16.551 +#: ../../../wicd/stuff/wicd:50 16.552 +#: ../../../wpa_supplicant/stuff/etc/init.d/wpa_supplicant:48 16.553 +#: ../../../x11vnc/stuff/x11vnc:45 ../../../ypserv/stuff/ypserv:49 16.554 +msgid "Usage:" 16.555 +msgstr "Использование:" 16.556 + 16.557 +#: ../../../acpid/stuff/init.d/acpid:12 16.558 +msgid "ACPI event deamon" 16.559 +msgstr "служба событий ACPI" 16.560 + 16.561 +#: ../../../ajaxterm/stuff/etc/init.d/ajaxterm:12 16.562 +#: ../../../autofs/stuff/etc/init.d/autofs:12 16.563 +#: ../../../chillispot/stuff/chilli:12 ../../../c_icap/stuff/c-icapd:12 16.564 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:12 16.565 +#: ../../../cyrus-sasl/stuff/etc/init.d/cyrus-sasl:12 16.566 +#: ../../../dropbear/stuff/init.d/dropbear:12 16.567 +#: ../../../fail2ban/stuff/etc/init.d/fail2ban:10 16.568 +#: ../../../gpm/stuff/etc/init.d/gpm:12 16.569 +#: ../../../knock/stuff/etc/init.d/knock:12 16.570 +#: ../../../mariadb/stuff/etc/init.d/mysql:12 16.571 +#: ../../../mysql/stuff/etc/init.d/mysql:12 16.572 +#: ../../../ntop/stuff/etc/init.d/ntop:12 ../../../ntp/stuff/ntp:12 16.573 +#: ../../../openerp-server/stuff/etc/init.d/openerp-server:12 16.574 +#: ../../../openldap/stuff/etc/init.d/openldap:12 16.575 +#: ../../../openssh/stuff/openssh:12 16.576 +#: ../../../partimage/stuff/etc/init.d/partimaged:12 16.577 +#: ../../../postfix/stuff/etc/init.d/postfix:12 16.578 +#: ../../../postgresql/stuff/etc/init.d/postgresql:12 16.579 +#: ../../../samba/stuff/etc/init.d/samba:12 16.580 +#: ../../../thttpd/stuff/etc/init.d/thttpd:12 16.581 +#: ../../../unfs3/stuff/etc/init.d/unfsd:12 ../../../x11vnc/stuff/x11vnc:10 16.582 +#: ../../../ypserv/stuff/ypserv:12 16.583 +msgid "%s server" 16.584 +msgstr "сервер %s" 16.585 + 16.586 +#: ../../../apache/stuff/apache:10 16.587 +msgid "Apache Web Server" 16.588 +msgstr "веб-сервер Apache" 16.589 + 16.590 +#: ../../../boxbackup-server/stuff/bbstored:12 16.591 +msgid "BoxBackup server deamon" 16.592 +msgstr "служба сервера BoxBackup" 16.593 + 16.594 +#: ../../../cherokee/stuff/cherokee:10 16.595 +msgid "Cherokee Web Server" 16.596 +msgstr "веб-сервер Cherokee" 16.597 + 16.598 +#: ../../../collectd/stuff/collectd:12 16.599 +msgid "Statistics collection daemon" 16.600 +msgstr "служба сбора статистики" 16.601 + 16.602 +#: ../../../connman/stuff/etc/init.d/connman:13 16.603 +msgid "Connection Manager" 16.604 +msgstr "диспетчер подключений" 16.605 + 16.606 +#: ../../../connman/stuff/etc/init.d/connman:53 16.607 +msgid "%s is running." 16.608 +msgstr "%s запущен." 16.609 + 16.610 +#: ../../../cyrus-imapd/stuff/etc/init.d/cyrus-imapd:26 16.611 +msgid "Initialize %s..." 16.612 +msgstr "Инициализация %s…" 16.613 + 16.614 +#: ../../../dbus/stuff/etc/init.d/dbus:10 16.615 +msgid "message bus daemon" 16.616 +msgstr "служба шины сообщений" 16.617 + 16.618 +#: ../../../ddclient/stuff/ddclient:11 16.619 +msgid "dynamic IP manager" 16.620 +msgstr "диспетчер динамического IP" 16.621 + 16.622 +#: ../../../dhid/stuff/init.d/dhid:9 16.623 +msgid "DHIS client daemon" 16.624 +msgstr "служба клиента DHIS" 16.625 + 16.626 +#: ../../../dropbear/stuff/init.d/dropbear:21 16.627 +#: ../../../dropbear/stuff/init.d/dropbear:28 16.628 +msgid "Generating Dropbear %s key..." 16.629 +msgstr "Создание %s-ключа Dropbear…" 16.630 + 16.631 +#: ../../../hal/stuff/etc/init.d/hald:10 16.632 +msgid "Hardware Abstraction Layer" 16.633 +msgstr "слой аппаратных абстракций (HAL)" 16.634 + 16.635 +#: ../../../hostapd/stuff/hostapd:10 16.636 +msgid "daemon for wireless software access points" 16.637 +msgstr "служба программных беспроводных точек доступа" 16.638 + 16.639 +#: ../../../lighttpd/stuff/etc/init.d/lighttpd:10 16.640 +#: ../../../nginx/stuff/etc/init.d/nginx:10 16.641 +#: ../../../nginx-extras/stuff/etc/init.d/nginx:10 16.642 +msgid "web server" 16.643 +msgstr "веб-сервер" 16.644 + 16.645 +#: ../../../linux64-zram/stuff/compcache:19 16.646 +#: ../../../linux-zram/stuff/compcache:19 16.647 +msgid "Loading module..." 16.648 +msgstr "Загрузка модуля…" 16.649 + 16.650 +#: ../../../linux64-zram/stuff/compcache:36 16.651 +#: ../../../linux-zram/stuff/compcache:36 16.652 +msgid "Unloading module..." 16.653 +msgstr "Выгрузка модуля…" 16.654 + 16.655 +#: ../../../lxdm/stuff/init.d/lxdm:11 16.656 +msgid "LXDE login manager" 16.657 +msgstr "диспетчер входа LXDE" 16.658 + 16.659 +#: ../../../lxnetdaemon/stuff/etc/init.d/lxnetdaemon:12 16.660 +msgid "Network daemon" 16.661 +msgstr "сетевая служба" 16.662 + 16.663 +#: ../../../mariadb/stuff/etc/init.d/mysql:29 16.664 +#: ../../../mysql/stuff/etc/init.d/mysql:29 16.665 +msgid "Initializing %s..." 16.666 +msgstr "Инициализация %s…" 16.667 + 16.668 +#: ../../../mariadb/stuff/etc/init.d/mysql:40 16.669 +#: ../../../mysql/stuff/etc/init.d/mysql:40 16.670 +#: ../../../openldap/stuff/etc/init.d/openldap:28 16.671 +#: ../../../postgresql/stuff/etc/init.d/postgresql:31 16.672 +msgid "Running %s..." 16.673 +msgstr "Запуск %s…" 16.674 + 16.675 +#: ../../../motion/stuff/init.d/motion:9 16.676 +msgid "Video detection daemon" 16.677 +msgstr "служба видео-детектирования" 16.678 + 16.679 +#: ../../../mpd/stuff/etc/init.d/mpd:11 16.680 +msgid "Music Player Daemon" 16.681 +msgstr "служба MPD" 16.682 + 16.683 +#: ../../../nagios/stuff/nagios:12 16.684 +msgid "Network Monitoring Server" 16.685 +msgstr "сервер мониторинга сети" 16.686 + 16.687 +#: ../../../netatalk/stuff/etc/init.d/netatalk:11 16.688 +#: ../../../netatalk-pam/stuff/etc/init.d/netatalk:11 16.689 +msgid "Netatalk daemons" 16.690 +msgstr "службы Netatalk" 16.691 + 16.692 +#: ../../../nscd/stuff/nscd:12 16.693 +msgid "name-server caching daemon" 16.694 +msgstr "служба кеширования сервиса имен" 16.695 + 16.696 +#: ../../../ofono/stuff/etc/init.d/ofono:13 16.697 +msgid "Mobile telephony Manager" 16.698 +msgstr "диспетчер мобильной связи" 16.699 + 16.700 +#: ../../../openerp-web/stuff/etc/init.d/openerp-web:12 16.701 +msgid "openerp-web server" 16.702 +msgstr "веб-сервер OpenERP" 16.703 + 16.704 +#: ../../../openssh/stuff/openssh:23 ../../../openssh/stuff/openssh:27 16.705 +#: ../../../openssh/stuff/openssh:31 16.706 +msgid "Generating OpenSSH %s key... " 16.707 +msgstr "Создание %s-ключа OpenSSH… " 16.708 + 16.709 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:20 16.710 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:20 16.711 +msgid "TUN/TAP support is not available in this Kernel" 16.712 +msgstr "Поддержка TUN/TAP недоступна в этом ядре" 16.713 + 16.714 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:25 16.715 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:25 16.716 +msgid "Detected broken %s symlink, fixing..." 16.717 +msgstr "Обнаружена битая ссылка на %s. Исправление…" 16.718 + 16.719 +#: ../../../openvpn/stuff/etc/init.d/openvpn-client:38 16.720 +msgid "Missing OpenVPN client config." 16.721 +msgstr "Отсутствует файл настроек клиента OpenVPN." 16.722 + 16.723 +#: ../../../openvpn/stuff/etc/init.d/openvpn-server:38 16.724 +msgid "Missing OpenVPN server config." 16.725 +msgstr "Отсутствует файл настроек сервера OpenVPN." 16.726 + 16.727 +#: ../../../pcsc-lite/stuff/init.d/pcscd:10 16.728 +msgid "PC/SC smart card daemon" 16.729 +msgstr "служба смарт-карт PC/SC" 16.730 + 16.731 +#: ../../../perdition/stuff/etc/init.d/perdition:13 16.732 +msgid "IMAP/POP3 proxy server" 16.733 +msgstr "прокси-сервер IMAP/POP3" 16.734 + 16.735 +#: ../../../portmap/stuff/init.d/portmap:12 16.736 +msgid "RPC portmapper" 16.737 +msgstr "RPC portmapper" 16.738 + 16.739 +#: ../../../portmap/stuff/init.d/portmap:37 16.740 +msgid "Restoring old RPC service information..." 16.741 +msgstr "Восстановление старой информации службы RPC…" 16.742 + 16.743 +#: ../../../postgresql/stuff/etc/init.d/postgresql:21 16.744 +msgid "Initializing PostgreSQL server database" 16.745 +msgstr "Инициализация базы данных сервера PostgreSQL" 16.746 + 16.747 +#: ../../../postgresql/stuff/etc/init.d/postgresql:49 16.748 +#: ../../../samba/stuff/etc/init.d/samba:62 16.749 +msgid "Reloading %s: %s..." 16.750 +msgstr "Перезагружается %s: %s…" 16.751 + 16.752 +#: ../../../postgrey/stuff/etc/init.d/postgrey:12 16.753 +msgid "Postfix Greylisting Policy Server" 16.754 +msgstr "сервер политики серых списков Postfix" 16.755 + 16.756 +#: ../../../postgrey/stuff/etc/init.d/postgrey:25 16.757 +msgid "Updating %s" 16.758 +msgstr "Обновление %s" 16.759 + 16.760 +#: ../../../privoxy/stuff/daemon-privoxy:12 16.761 +msgid "Web proxy daemon" 16.762 +msgstr "служба веб-прокси" 16.763 + 16.764 +#: ../../../pure-ftpd/stuff/pure-ftpd:12 16.765 +msgid "pure-FTPd Server Daemon" 16.766 +msgstr "служба сервера pure-FTPd" 16.767 + 16.768 +#: ../../../slim/stuff/etc/init.d/slim:11 16.769 +msgid "Simple login manager" 16.770 +msgstr "простой диспетчер входа" 16.771 + 16.772 +#: ../../../smartmontools/stuff/etc/init.d/smartd:12 16.773 +msgid "Smartmontools (SMART) Daemon" 16.774 +msgstr "служба Smartmontools (SMART)" 16.775 + 16.776 +#: ../../../squid/stuff/etc/init.d/squid:12 16.777 +msgid "Squid proxy server" 16.778 +msgstr "прокси-сервер Squid" 16.779 + 16.780 +#: ../../../squid/stuff/etc/init.d/squid:29 16.781 +msgid "Creating squid spool directory structure" 16.782 +msgstr "Создание структуры спул-папки Squid" 16.783 + 16.784 +#: ../../../squid/stuff/etc/init.d/squid:54 16.785 +msgid "Reloading %s configuration..." 16.786 +msgstr "Перезагружаются параметры %s…" 16.787 + 16.788 +#: ../../../tinyproxy/stuff/tinyproxy:7 16.789 +msgid "Tiny Proxy" 16.790 +msgstr "крошечный прокси" 16.791 + 16.792 +#: ../../../virtualbox-ose-guestutils/stuff/VBoxService:10 16.793 +msgid "VirtualBox Guest Service" 16.794 +msgstr "гостевые службы VirtualBox" 16.795 + 16.796 +#: ../../../wicd/stuff/wicd:12 16.797 +msgid "Network connection manager" 16.798 +msgstr "диспетчер сетевых подключений"
17.1 --- a/c_icap/stuff/c-icapd Wed May 25 23:07:05 2016 +0200 17.2 +++ b/c_icap/stuff/c-icapd Thu May 26 20:16:45 2016 +0300 17.3 @@ -1,5 +1,5 @@ 17.4 #!/bin/sh 17.5 -# /etc/init.d/nagios : Start, stop and restart ICAP server on SliTaz, at 17.6 +# /etc/init.d/nagios : Start, stop and restart ICAP server on SliTaz, at 17.7 # boot time or with the command line. 17.8 # 17.9 # To start ICAP server at boot time, just put c-icapd in the $RUN_DAEMONS 17.10 @@ -9,7 +9,7 @@ 17.11 . /etc/daemons.conf 17.12 17.13 NAME=c-icap 17.14 -DESC="ICAP Server" 17.15 +DESC="$(_ '%s server' ICAP)" 17.16 DAEMON=/usr/bin/c-icap 17.17 OPTIONS="" 17.18 PIDFILE=/var/run/c-icap/c-icap.pid 17.19 @@ -18,39 +18,38 @@ 17.20 case "$1" in 17.21 start) 17.22 if active_pidfile $PIDFILE $NAME ; then 17.23 - echo "$NAME already running." 17.24 + _ '%s is already running.' $NAME 17.25 exit 1 17.26 fi 17.27 - echo -n "Starting $DESC: $NAME... " 17.28 - $DAEMON $OPTIONS 17.29 + action 'Starting %s: %s...' "$DESC" $NAME 17.30 + $DAEMON $OPTIONS 17.31 status 17.32 ;; 17.33 stop) 17.34 if ! active_pidfile $PIDFILE $NAME ; then 17.35 - echo "$NAME is not running." 17.36 + _ '%s is not running.' $NAME 17.37 exit 1 17.38 fi 17.39 - echo -n "Stopping $DESC: $NAME... " 17.40 - kill `cat $PIDFILE` 17.41 + action 'Stopping %s: %s...' "$DESC" $NAME 17.42 + kill $(cat $PIDFILE) 17.43 status 17.44 ;; 17.45 restart|reload) 17.46 if ! active_pidfile $PIDFILE $NAME ; then 17.47 - echo "$NAME is not running." 17.48 + _ '%s is not running.' $NAME 17.49 exit 1 17.50 fi 17.51 - echo -n "Restarting $DESC: $NAME... " 17.52 - kill `cat $PIDFILE` 17.53 + action 'Restarting %s: %s...' "$DESC" $NAME 17.54 + kill $(cat $PIDFILE) 17.55 sleep 2 17.56 $DAEMON $OPTIONS 17.57 status 17.58 ;; 17.59 test) 17.60 - configtest ;; 17.61 + configtest ;; 17.62 *) 17.63 - echo "" 17.64 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart|reload]" 17.65 - echo "" 17.66 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload|test]" 17.67 + newline 17.68 exit 1 17.69 ;; 17.70 esac
18.1 --- a/cherokee/stuff/cherokee Wed May 25 23:07:05 2016 +0200 18.2 +++ b/cherokee/stuff/cherokee Thu May 26 20:16:45 2016 +0300 18.3 @@ -1,5 +1,5 @@ 18.4 #!/bin/sh 18.5 -# /etc/init.d/cherokee: Start, stop and restart Cherokee web server on SliTaz, 18.6 +# /etc/init.d/cherokee: Start, stop and restart Cherokee web server on SliTaz, 18.7 # at boot time or with the command line. Daemons options are configured 18.8 # with /etc/daemons.conf 18.9 # 18.10 @@ -7,7 +7,7 @@ 18.11 . /etc/daemons.conf 18.12 18.13 NAME=Cherokee 18.14 -DESC="Cherokee Web Server" 18.15 +DESC="$(_ 'Cherokee Web Server')" 18.16 DAEMON=/usr/sbin/cherokee 18.17 OPTIONS= 18.18 PIDFILE=/var/run/cherokee.pid 18.19 @@ -15,28 +15,28 @@ 18.20 case "$1" in 18.21 start) 18.22 if active_pidfile $PIDFILE cherokee ; then 18.23 - echo "$NAME already running." 18.24 + _ '%s is already running.' $NAME 18.25 exit 1 18.26 fi 18.27 - echo -n "Starting $DESC: $NAME... " 18.28 - $DAEMON $OPTIONS -d &>/dev/null 18.29 + action 'Starting %s: %s...' "$DESC" $NAME 18.30 + $DAEMON $OPTIONS -d &>/dev/null 18.31 status 18.32 ;; 18.33 stop) 18.34 if ! active_pidfile $PIDFILE cherokee ; then 18.35 - echo "$NAME is not running." 18.36 + _ '%s is not running.' $NAME 18.37 exit 1 18.38 fi 18.39 - echo -n "Stopping $DESC: $NAME... " 18.40 + action 'Stopping %s: %s...' "$DESC" $NAME 18.41 kill $(cat $PIDFILE) 18.42 status 18.43 ;; 18.44 restart) 18.45 if ! active_pidfile $PIDFILE cherokee ; then 18.46 - echo "$NAME is not running." 18.47 + _ '%s is not running.' $NAME 18.48 exit 1 18.49 fi 18.50 - echo -n "Restarting $DESC: $NAME... " 18.51 + action 'Restarting %s: %s...' "$DESC" $NAME 18.52 kill $(cat $PIDFILE) 18.53 rm $PIDFILE 18.54 sleep 2 18.55 @@ -44,9 +44,8 @@ 18.56 status 18.57 ;; 18.58 *) 18.59 - echo "" 18.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 18.61 - echo "" 18.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 18.63 + newline 18.64 exit 1 18.65 ;; 18.66 esac
19.1 --- a/chillispot/stuff/chilli Wed May 25 23:07:05 2016 +0200 19.2 +++ b/chillispot/stuff/chilli Thu May 26 20:16:45 2016 +0300 19.3 @@ -1,5 +1,5 @@ 19.4 #!/bin/sh 19.5 -# /etc/init.d/chilli : Start, stop and restart ChilliSpot server on SliTaz, at 19.6 +# /etc/init.d/chilli : Start, stop and restart ChilliSpot server on SliTaz, at 19.7 # boot time or with the command line. 19.8 # 19.9 # To start ChilliSpot server at boot time, just put chilli in the $RUN_DAEMONS 19.10 @@ -9,7 +9,7 @@ 19.11 . /etc/daemons.conf 19.12 19.13 NAME=ChilliSpot 19.14 -DESC="ChilliSpot server" 19.15 +DESC="$(_ '%s server' ChilliSpot)" 19.16 DAEMON=/usr/sbin/chilli 19.17 OPTIONS=$CHILLI_OPTIONS 19.18 PIDFILE=/var/run/chilli.pid 19.19 @@ -18,36 +18,36 @@ 19.20 case "$1" in 19.21 start) 19.22 if active_pidfile $PIDFILE chilli ; then 19.23 - echo "$NAME already running." 19.24 + _ '%s is already running.' $NAME 19.25 exit 1 19.26 fi 19.27 + action 'Starting %s: %s...' "$DESC" $NAME 19.28 $DAEMON $OPTIONS 19.29 status 19.30 ;; 19.31 stop) 19.32 if ! active_pidfile $PIDFILE chilli ; then 19.33 - echo "$NAME is not running." 19.34 + _ '%s is not running.' $NAME 19.35 exit 1 19.36 fi 19.37 - echo -n "Stopping $DESC: $NAME... " 19.38 - kill `cat $PIDFILE` 19.39 + action 'Stopping %s: %s...' "$DESC" $NAME 19.40 + kill $(cat $PIDFILE) 19.41 status 19.42 ;; 19.43 restart) 19.44 if ! active_pidfile $PIDFILE chilli ; then 19.45 - echo "$NAME is not running." 19.46 + _ '%s is not running.' $NAME 19.47 exit 1 19.48 fi 19.49 - echo -n "Restarting $DESC: $NAME... " 19.50 - kill `cat $PIDFILE` 19.51 + action 'Restarting %s: %s...' "$DESC" $NAME 19.52 + kill $(cat $PIDFILE) 19.53 sleep 2 19.54 $DAEMON $OPTIONS 19.55 status 19.56 ;; 19.57 *) 19.58 - echo "" 19.59 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 19.60 - echo "" 19.61 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 19.62 + newline 19.63 exit 1 19.64 ;; 19.65 esac
20.1 --- a/clamav/stuff/daemon-clamd Wed May 25 23:07:05 2016 +0200 20.2 +++ b/clamav/stuff/daemon-clamd Thu May 26 20:16:45 2016 +0300 20.3 @@ -1,5 +1,5 @@ 20.4 #!/bin/sh 20.5 -# /etc/init.d/daemon-name: Start, stop and restart daemon 20.6 +# /etc/init.d/daemon-name: Start, stop and restart daemon 20.7 # on SliTaz, at boot time or with the command line. 20.8 # 20.9 # To start daemon at boot time, just put the right name in the $RUN_DAEMONS 20.10 @@ -9,7 +9,7 @@ 20.11 . /etc/daemons.conf 20.12 20.13 NAME=Clamd 20.14 -DESC="clamav daemon" 20.15 +DESC="$(_ '%s daemon' clamav)" 20.16 DAEMON=/usr/sbin/clamd 20.17 OPTIONS=$CLAMD_OPTIONS 20.18 PIDFILE=/run/clamav/clamd.pid 20.19 @@ -17,39 +17,38 @@ 20.20 case "$1" in 20.21 start) 20.22 if active_pidfile $PIDFILE clamd ; then 20.23 - echo "$NAME already running." 20.24 + _ '%s is already running.' $NAME 20.25 exit 1 20.26 fi 20.27 - echo -n "Starting $DESC: $NAME... " 20.28 - $DAEMON $OPTIONS 20.29 + action 'Starting %s: %s...' "$DESC" $NAME 20.30 + $DAEMON $OPTIONS 20.31 status 20.32 ;; 20.33 stop) 20.34 if ! active_pidfile $PIDFILE clamd ; then 20.35 - echo "$NAME is not running." 20.36 + _ '%s is not running.' $NAME 20.37 exit 1 20.38 fi 20.39 - echo -n "Stopping $DESC: $NAME... " 20.40 - kill `cat $PIDFILE` 20.41 + action 'Stopping %s: %s...' "$DESC" $NAME 20.42 + kill $(cat $PIDFILE) 20.43 rm $PIDFILE 20.44 status 20.45 ;; 20.46 restart) 20.47 if ! active_pidfile $PIDFILE clamd ; then 20.48 - echo "$NAME is not running." 20.49 + _ '%s is not running.' $NAME 20.50 exit 1 20.51 fi 20.52 - echo -n "Restarting $DESC: $NAME... " 20.53 - kill `cat $PIDFILE` 20.54 + action 'Restarting %s: %s...' "$DESC" $NAME 20.55 + kill $(cat $PIDFILE) 20.56 rm $PIDFILE 20.57 sleep 2 20.58 $DAEMON $OPTIONS 20.59 status 20.60 ;; 20.61 *) 20.62 - echo "" 20.63 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 20.64 - echo "" 20.65 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 20.66 + newline 20.67 exit 1 20.68 ;; 20.69 esac
21.1 --- a/collectd/stuff/collectd Wed May 25 23:07:05 2016 +0200 21.2 +++ b/collectd/stuff/collectd Thu May 26 20:16:45 2016 +0300 21.3 @@ -1,5 +1,5 @@ 21.4 #!/bin/sh 21.5 -# /etc/init.d/collectd : Start, stop and restart Collectd server on SliTaz, at 21.6 +# /etc/init.d/collectd : Start, stop and restart Collectd server on SliTaz, at 21.7 # boot time or with the command line. 21.8 # 21.9 # To start Collectd server at boot time, just put collectd in the $RUN_DAEMONS 21.10 @@ -9,7 +9,7 @@ 21.11 . /etc/daemons.conf 21.12 21.13 NAME=collectd 21.14 -DESC="Statistics collection daemon" 21.15 +DESC="$(_ 'Statistics collection daemon')" 21.16 DAEMON=/usr/sbin/collectd 21.17 OPTIONS="" 21.18 PIDFILE=/var/run/collectd.pid 21.19 @@ -17,37 +17,36 @@ 21.20 case "$1" in 21.21 start) 21.22 if active_pidfile $PIDFILE collectd ; then 21.23 - echo "$NAME already running." 21.24 + _ '%s is already running.' $NAME 21.25 exit 1 21.26 fi 21.27 - echo -n "Starting $DESC: $NAME... " 21.28 + action 'Starting %s: %s...' "$DESC" $NAME 21.29 $DAEMON $OPTIONS 21.30 status 21.31 ;; 21.32 stop) 21.33 if ! active_pidfile $PIDFILE collectd ; then 21.34 - echo "$NAME is not running." 21.35 + _ '%s is not running.' $NAME 21.36 exit 1 21.37 fi 21.38 - echo -n "Stopping $DESC: $NAME... " 21.39 - kill `cat $PIDFILE` 21.40 + action 'Stopping %s: %s...' "$DESC" $NAME 21.41 + kill $(cat $PIDFILE) 21.42 status 21.43 ;; 21.44 restart) 21.45 if ! active_pidfile $PIDFILE collectd ; then 21.46 - echo "$NAME is not running." 21.47 + _ '%s is not running.' $NAME 21.48 exit 1 21.49 fi 21.50 - echo -n "Restarting $DESC: $NAME... " 21.51 - kill `cat $PIDFILE` 21.52 + action 'Restarting %s: %s...' "$DESC" $NAME 21.53 + kill $(cat $PIDFILE) 21.54 sleep 2 21.55 $DAEMON $OPTIONS 21.56 status 21.57 ;; 21.58 *) 21.59 - echo "" 21.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 21.61 - echo "" 21.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 21.63 + newline 21.64 exit 1 21.65 ;; 21.66 esac
22.1 --- a/connman/stuff/etc/init.d/connman Wed May 25 23:07:05 2016 +0200 22.2 +++ b/connman/stuff/etc/init.d/connman Thu May 26 20:16:45 2016 +0300 22.3 @@ -10,7 +10,7 @@ 22.4 . /etc/daemons.conf 22.5 22.6 NAME=Connman 22.7 -DESC="Connection Manager" 22.8 +DESC="$(_ 'Connection Manager')" 22.9 DAEMON=connmand 22.10 OPTIONS=$CONNMAN_OPTIONS 22.11 PIDFILE="$(pidof $DAEMON)" 22.12 @@ -18,30 +18,30 @@ 22.13 case "$1" in 22.14 start) 22.15 if [ -n "$PIDFILE" ] ; then 22.16 - echo "$NAME is already running." 22.17 + _ '%s is already running.' $NAME 22.18 exit 1 22.19 fi 22.20 pkill udhcpc 2>/dev/null 22.21 - echo -n "Starting $DESC: $NAME... " 22.22 + action 'Starting %s: %s...' "$DESC" $NAME 22.23 $DAEMON $OPTIONS 22.24 status 22.25 ;; 22.26 stop) 22.27 if [ -z "$PIDFILE" ] ; then 22.28 - echo "$NAME is not running." 22.29 + _ '%s is not running.' $NAME 22.30 exit 1 22.31 fi 22.32 - echo -n "Stopping $DESC: $NAME... " 22.33 + action 'Stopping %s: %s...' "$DESC" $NAME 22.34 pkill $DAEMON 22.35 pkill wpa_supplicant 22.36 status 22.37 ;; 22.38 restart) 22.39 if [ -z "$PIDFILE" ] ; then 22.40 - echo "$NAME is not running." 22.41 + _ '%s is not running.' $NAME 22.42 exit 1 22.43 fi 22.44 - echo -n "Restarting $DESC: $NAME... " 22.45 + action 'Restarting %s: %s...' "$DESC" $NAME 22.46 pkill $DAEMON && 22.47 pkill wpa_supplicant && 22.48 sleep 2 && 22.49 @@ -50,15 +50,14 @@ 22.50 ;; 22.51 status) 22.52 if [ -n "$PIDFILE" ] ; then 22.53 - echo "$NAME is running." 22.54 + _ '%s is running.' $NAME 22.55 else 22.56 - echo "$NAME is not running." 22.57 - fi 22.58 + _ '%s is not running.' $NAME 22.59 + fi 22.60 ;; 22.61 *) 22.62 - printf "\n\033[1mUsage:\033[0m /etc/init.d/%b [start|stop|restart|status]\n" \ 22.63 - "$(basename $0)" 22.64 - exit 1 22.65 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|status]" 22.66 + newline 22.67 ;; 22.68 esac 22.69
23.1 --- a/cups/stuff/etc/init.d/cupsd Wed May 25 23:07:05 2016 +0200 23.2 +++ b/cups/stuff/etc/init.d/cupsd Thu May 26 20:16:45 2016 +0300 23.3 @@ -9,14 +9,14 @@ 23.4 . /etc/daemons.conf 23.5 23.6 NAME=Cupsd 23.7 -DESC="cups deamon" 23.8 +DESC="$(_ '%s daemon' CUPS)" 23.9 DAEMON=/usr/sbin/cupsd 23.10 OPTIONS=$CUPSD_OPTIONS 23.11 PIDFILE=/var/run/cups/cups.sock 23.12 23.13 case "$1" in 23.14 stop) 23.15 - action 'Stopping $DESC: $NAME... ' 23.16 + action 'Stopping %s: %s...' "$DESC" $NAME 23.17 kill $(pgrep -f cupsd) 23.18 sleep 2 23.19 [ -e /var/run/cups/cups.sock ] && rm -f $PIDFILE 23.20 @@ -24,16 +24,15 @@ 23.21 ;; 23.22 start) 23.23 if ! active_pidfile $PIDFILE cupsd 2>/dev/null; then 23.24 - action 'Starting $DESC: $NAME... ' 23.25 + action 'Starting %s: %s...' "$DESC" $NAME 23.26 $DAEMON $OPTIONS 23.27 status 23.28 else 23.29 - action 'Not starting $DESC: $DESC is already running' 23.30 - false; status 23.31 + _ '%s is already running.' $NAME 23.32 fi 23.33 ;; 23.34 *) 23.35 - emsg "<n><b>Usage:</b> /etc/init.d/$(basename $0) [start|stop]" 23.36 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop]" 23.37 newline 23.38 exit 1 23.39 ;;
24.1 --- a/cyrus-imapd/stuff/etc/init.d/cyrus-imapd Wed May 25 23:07:05 2016 +0200 24.2 +++ b/cyrus-imapd/stuff/etc/init.d/cyrus-imapd Thu May 26 20:16:45 2016 +0300 24.3 @@ -1,5 +1,5 @@ 24.4 #!/bin/sh 24.5 -# /etc/init.d/cyrus-imapd : Start, stop and restart IMAP server on SliTaz, at 24.6 +# /etc/init.d/cyrus-imapd : Start, stop and restart IMAP server on SliTaz, at 24.7 # boot time or with the command line. 24.8 # 24.9 # To start IMAP server at boot time, just put cyrus-imapd in the $RUN_DAEMONS 24.10 @@ -9,7 +9,7 @@ 24.11 . /etc/daemons.conf 24.12 24.13 NAME=cyrus-imapd 24.14 -DESC="IMAP server" 24.15 +DESC="$(_ '%s server' IMAP)" 24.16 DAEMON=/usr/lib/cyrus/master 24.17 OPTIONS=$CYRUS_OPTIONS 24.18 PIDFILE=/var/run/cyrus.master.pid 24.19 @@ -18,12 +18,12 @@ 24.20 case "$1" in 24.21 start) 24.22 if active_pidfile $PIDFILE master ; then 24.23 - echo "$NAME already running." 24.24 + _ '%s is already running.' $NAME 24.25 exit 1 24.26 fi 24.27 - dir=$(grep ^configdirectory /etc/imapd.conf | awk '{ print $2 }') 24.28 + dir=$(grep ^configdirectory /etc/imapd.conf | awk '{print $2}') 24.29 if [ ! -f $dir/mailboxes.db ]; then 24.30 - echo -n "Initialize $DESC: " 24.31 + action 'Initialize %s...' "$DESC" 24.32 #/usr/cyrus/bin/mkimap 24.33 for i in db proc socket log msg user quota; do 24.34 [ -d $dir/$i ] || mkdir -p -m 700 $dir/$i 24.35 @@ -43,7 +43,7 @@ 24.36 [ -d $i/$j ] || mkdir -p $i/$j 24.37 done ;; 24.38 esac 24.39 - [ -d $i/stage. ] || mkdir $i/stage. 24.40 + [ -d $i/stage. ] || mkdir $i/stage. 24.41 chown -R cyrus:mail $i 24.42 done 24.43 case "$(grep ^sieveusehomedir /etc/imapd.conf | awk '{ print $2 }')" in 24.44 @@ -60,44 +60,43 @@ 24.45 su cyrus -c "/usr/cyrus/bin/reconstruct" 24.46 status 24.47 fi 24.48 - if ! pidof saslauthd > /dev/null; then 24.49 + if ! pidof saslauthd >/dev/null; then 24.50 /etc/init.d/cyrus-sasl start 24.51 fi 24.52 - echo -n "Starting $DESC: $NAME... " 24.53 + action 'Starting %s: %s...' "$DESC" $NAME 24.54 $DAEMON $OPTIONS 24.55 status 24.56 sleep 2 24.57 ;; 24.58 stop) 24.59 if ! active_pidfile $PIDFILE master ; then 24.60 - echo "$NAME is not running." 24.61 + _ '%s is not running.' $NAME 24.62 exit 1 24.63 fi 24.64 - echo -n "Stopping $DESC: $NAME... " 24.65 - kill `cat $PIDFILE` 24.66 - ps x | grep -q `cat $PIDFILE` || rm -f $PIDFILE 24.67 + action 'Stopping %s: %s...' "$DESC" $NAME 24.68 + kill $(cat $PIDFILE) 24.69 + ps x | grep -q $(cat $PIDFILE) || rm -f $PIDFILE 24.70 status 24.71 ;; 24.72 restart) 24.73 if ! active_pidfile $PIDFILE master ; then 24.74 - echo "$NAME is not running." 24.75 + _ '%s is not running.' $NAME 24.76 exit 1 24.77 fi 24.78 - echo -n "Restarting $DESC: $NAME... " 24.79 - kill `cat $PIDFILE` 24.80 - if ps x | grep -q `cat $PIDFILE`; then 24.81 - false 24.82 + action 'Restarting %s: %s...' "$DESC" $NAME 24.83 + kill $(cat $PIDFILE) 24.84 + if ps x | grep -q $(cat $PIDFILE); then 24.85 + false 24.86 else 24.87 - rm -f $PIDFILE 24.88 - sleep 2 24.89 - $DAEMON $OPTIONS 24.90 + rm -f $PIDFILE 24.91 + sleep 2 24.92 + $DAEMON $OPTIONS 24.93 fi 24.94 status 24.95 ;; 24.96 *) 24.97 - echo "" 24.98 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 24.99 - echo "" 24.100 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 24.101 + newline 24.102 exit 1 24.103 ;; 24.104 esac
25.1 --- a/cyrus-sasl/stuff/etc/init.d/cyrus-sasl Wed May 25 23:07:05 2016 +0200 25.2 +++ b/cyrus-sasl/stuff/etc/init.d/cyrus-sasl Thu May 26 20:16:45 2016 +0300 25.3 @@ -1,5 +1,5 @@ 25.4 #!/bin/sh 25.5 -# /etc/init.d/cyrus-sasl : Start, stop and restart SASL server on SliTaz, at 25.6 +# /etc/init.d/cyrus-sasl : Start, stop and restart SASL server on SliTaz, at 25.7 # boot time or with the command line. 25.8 # 25.9 # To start SASL server at boot time, just put cyrus-sasl in the $RUN_DAEMONS 25.10 @@ -9,7 +9,7 @@ 25.11 . /etc/daemons.conf 25.12 25.13 NAME=cyrus-sasl 25.14 -DESC="SASL server" 25.15 +DESC="$(_ '%s server' SASL)" 25.16 DAEMON=/usr/sbin/saslauthd 25.17 OPTIONS=$CYRUS_OPTIONS 25.18 PIDFILE=/var/state/saslauthd/saslauthd.pid 25.19 @@ -18,37 +18,36 @@ 25.20 case "$1" in 25.21 start) 25.22 if active_pidfile $PIDFILE saslauthd ; then 25.23 - echo "$NAME already running." 25.24 + _ '%s is already running.' $NAME 25.25 exit 1 25.26 fi 25.27 - echo -n "Starting $DESC: $NAME... " 25.28 + action 'Starting %s: %s...' "$DESC" $NAME 25.29 $DAEMON $OPTIONS 25.30 status 25.31 ;; 25.32 stop) 25.33 if ! active_pidfile $PIDFILE saslauthd ; then 25.34 - echo "$NAME is not running." 25.35 + _ '%s is not running.' $NAME 25.36 exit 1 25.37 fi 25.38 - echo -n "Stopping $DESC: $NAME... " 25.39 - kill `cat $PIDFILE` 25.40 + action 'Stopping %s: %s...' "$DESC" $NAME 25.41 + kill $(cat $PIDFILE) 25.42 status 25.43 ;; 25.44 restart) 25.45 if ! active_pidfile $PIDFILE saslauthd ; then 25.46 - echo "$NAME is not running." 25.47 + _ '%s is not running.' $NAME 25.48 exit 1 25.49 fi 25.50 - echo -n "Restarting $DESC: $NAME... " 25.51 - kill `cat $PIDFILE` 25.52 + action 'Restarting %s: %s...' "$DESC" $NAME 25.53 + kill $(cat $PIDFILE) 25.54 sleep 2 25.55 $DAEMON $OPTIONS 25.56 status 25.57 ;; 25.58 *) 25.59 - echo "" 25.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 25.61 - echo "" 25.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 25.63 + newline 25.64 exit 1 25.65 ;; 25.66 esac
26.1 --- a/dbus/stuff/etc/init.d/dbus Wed May 25 23:07:05 2016 +0200 26.2 +++ b/dbus/stuff/etc/init.d/dbus Thu May 26 20:16:45 2016 +0300 26.3 @@ -7,7 +7,7 @@ 26.4 . /etc/daemons.conf 26.5 26.6 NAME=DBUS 26.7 -DESC="message bus daemon" 26.8 +DESC="$(_ 'message bus daemon')" 26.9 DAEMON=/usr/bin/dbus-daemon 26.10 OPTIONS=$DBUS_OPTIONS 26.11 PIDFILE=/run/dbus/pid 26.12 @@ -20,41 +20,40 @@ 26.13 case "$1" in 26.14 start) 26.15 if active_pidfile $PIDFILE dbus-daemon ; then 26.16 - echo "$NAME already running." 26.17 + _ '%s is already running.' $NAME 26.18 exit 1 26.19 fi 26.20 mkdir -p /run/dbus 26.21 - echo -n "Starting $DESC: $NAME... " 26.22 + action 'Starting %s: %s...' "$DESC" $NAME 26.23 $DAEMON $OPTIONS 26.24 status 26.25 ;; 26.26 stop) 26.27 if ! active_pidfile $PIDFILE dbus-daemon ; then 26.28 - echo "$NAME is not running." 26.29 + _ '%s is not running.' $NAME 26.30 exit 1 26.31 fi 26.32 - echo -n "Stopping $DESC: $NAME... " 26.33 - kill `cat $PIDFILE` 26.34 + action 'Stopping %s: %s...' "$DESC" $NAME 26.35 + kill $(cat $PIDFILE) 26.36 rm $PIDFILE 26.37 status 26.38 ;; 26.39 restart) 26.40 if ! active_pidfile $PIDFILE dbus-daemon ; then 26.41 - echo "$NAME is not running." 26.42 + _ '%s is not running.' $NAME 26.43 exit 1 26.44 fi 26.45 mkdir -p /run/dbus 26.46 - echo -n "Restarting $DESC: $NAME... " 26.47 - kill `cat $PIDFILE` 26.48 + action 'Restarting %s: %s...' "$DESC" $NAME 26.49 + kill $(cat $PIDFILE) 26.50 rm $PIDFILE 26.51 sleep 2 26.52 $DAEMON $OPTIONS 26.53 status 26.54 ;; 26.55 *) 26.56 - echo "" 26.57 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 26.58 - echo "" 26.59 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 26.60 + newline 26.61 exit 1 26.62 ;; 26.63 esac
27.1 --- a/ddclient/stuff/ddclient Wed May 25 23:07:05 2016 +0200 27.2 +++ b/ddclient/stuff/ddclient Thu May 26 20:16:45 2016 +0300 27.3 @@ -8,7 +8,7 @@ 27.4 . /etc/init.d/rc.functions 27.5 27.6 NAME=DDclient 27.7 -DESC="ddclient dynamic IP manager" 27.8 +DESC="$(_ 'dynamic IP manager')" 27.9 DAEMON=/usr/sbin/ddclient 27.10 PID_FILE=/var/run/ddclient.pid 27.11 OPTION="-pid $PID_FILE" 27.12 @@ -16,29 +16,29 @@ 27.13 case "$1" in 27.14 start) 27.15 if active_pidfile $PID_FILE ddclient ; then 27.16 - echo "$NAME already running." 27.17 + _ '%s is already running.' $NAME 27.18 exit 1 27.19 fi 27.20 - echo -n "Starting $DESC: $NAME... " 27.21 + action 'Starting %s: %s...' "$DESC" $NAME 27.22 $DAEMON $OPTION 27.23 status 27.24 ;; 27.25 stop) 27.26 if ! active_pidfile $PID_FILE ddclient ; then 27.27 - echo "$NAME is not running." 27.28 + _ '%s is not running.' $NAME 27.29 exit 1 27.30 fi 27.31 - echo -n "Stopping $DESC: $NAME... " 27.32 + action 'Stopping %s: %s...' "$DESC" $NAME 27.33 killall ddclient 27.34 rm $PID_FILE 27.35 status 27.36 ;; 27.37 restart) 27.38 if ! active_pidfile $PID_FILE ddclient ; then 27.39 - echo "$NAME is not running." 27.40 + _ '%s is not running.' $NAME 27.41 exit 1 27.42 fi 27.43 - echo -n "Restarting $DESC: $NAME... " 27.44 + action 'Restarting %s: %s...' "$DESC" $NAME 27.45 killall ddclient 27.46 rm $PID_FILE 27.47 sleep 2 27.48 @@ -46,9 +46,8 @@ 27.49 status 27.50 ;; 27.51 *) 27.52 - echo "" 27.53 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 27.54 - echo "" 27.55 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 27.56 + newline 27.57 exit 1 27.58 ;; 27.59 esac
28.1 --- a/dhcp/stuff/dhcpd Wed May 25 23:07:05 2016 +0200 28.2 +++ b/dhcp/stuff/dhcpd Thu May 26 20:16:45 2016 +0300 28.3 @@ -9,7 +9,7 @@ 28.4 . /etc/daemons.conf 28.5 28.6 NAME=Dhcpd 28.7 -DESC="dhcp deamon" 28.8 +DESC="$(_ '%s daemon' DHCP)" 28.9 DAEMON=/usr/sbin/dhcpd 28.10 OPTIONS=$DHCPD_OPTIONS 28.11 PIDFILE=/var/run/dhcpd.pid 28.12 @@ -17,37 +17,36 @@ 28.13 case "$1" in 28.14 start) 28.15 if active_pidfile $PIDFILE dhcpd ; then 28.16 - echo "$NAME already running." 28.17 + _ '%s is already running.' $NAME 28.18 exit 1 28.19 fi 28.20 - echo -n "Starting $DESC: $NAME... " 28.21 - $DAEMON $OPTIONS 28.22 + action 'Starting %s: %s...' "$DESC" $NAME 28.23 + $DAEMON $OPTIONS 28.24 status 28.25 ;; 28.26 stop) 28.27 if ! active_pidfile $PIDFILE dhcpd ; then 28.28 - echo "$NAME is not running." 28.29 + _ '%s is not running.' $NAME 28.30 exit 1 28.31 fi 28.32 - echo -n "Stopping $DESC: $NAME... " 28.33 - kill `cat $PIDFILE` 28.34 + action 'Stopping %s: %s...' "$DESC" $NAME 28.35 + kill $(cat $PIDFILE) 28.36 status 28.37 ;; 28.38 restart) 28.39 if ! active_pidfile $PIDFILE dhcpd ; then 28.40 - echo "$NAME is not running." 28.41 + _ '%s is not running.' $NAME 28.42 exit 1 28.43 fi 28.44 - echo -n "Restarting $DESC: $NAME... " 28.45 - kill `cat $PIDFILE` 28.46 + action 'Restarting %s: %s...' "$DESC" $NAME 28.47 + kill $(cat $PIDFILE) 28.48 sleep 2 28.49 $DAEMON $OPTIONS 28.50 status 28.51 ;; 28.52 *) 28.53 - echo "" 28.54 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 28.55 - echo "" 28.56 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 28.57 + newline 28.58 exit 1 28.59 ;; 28.60 esac
29.1 --- a/dhid/stuff/init.d/dhid Wed May 25 23:07:05 2016 +0200 29.2 +++ b/dhid/stuff/init.d/dhid Thu May 26 20:16:45 2016 +0300 29.3 @@ -2,47 +2,52 @@ 29.4 # 29.5 # /etc/init.d/dhid: Start, stop and restart dhis daemon on SliTaz 29.6 # 29.7 -. /lib/libtaz.sh 29.8 +. /etc/init.d/rc.functions 29.9 #. /etc/daemons.conf 29.10 29.11 NAME=DHID 29.12 -DESC="dyn ip" 29.13 +DESC="$(_ 'DHIS client daemon')" 29.14 DAEMON=/usr/sbin/dhid 29.15 PIDFILE=/run/dhid.pid 29.16 OPTIONS="-P $PIDFILE" 29.17 29.18 case "$1" in 29.19 - start) 29.20 + start) 29.21 if active_pidfile $PIDFILE dhid; then 29.22 - echo "$NAME already running."; §exit 1 29.23 + _ '%s is already running.' $NAME 29.24 + exit 1 29.25 fi 29.26 - echo -n "Starting $DESC: $NAME... " 29.27 - $DAEMON $OPTIONS 29.28 - status ;; 29.29 - 29.30 + action 'Starting %s: %s...' "$DESC" $NAME 29.31 + $DAEMON $OPTIONS 29.32 + status 29.33 + ;; 29.34 stop) 29.35 if ! active_pidfile $PIDFILE dhid; then 29.36 - echo "$NAME is not running."; exit 1 29.37 + _ '%s is not running.' $NAME 29.38 + exit 1 29.39 fi 29.40 - echo -n "Stopping $DESC: $NAME... " 29.41 + action 'Stopping %s: %s...' "$DESC" $NAME 29.42 kill $(cat $PIDFILE) 29.43 rm $PIDFILE 29.44 - status ;; 29.45 - 29.46 + status 29.47 + ;; 29.48 restart) 29.49 if ! active_pidfile $PIDFILE dhid; then 29.50 - echo "$NAME is not running."; exit 1 29.51 + _ '%s is not running.' $NAME 29.52 + exit 1 29.53 fi 29.54 - echo -n "Restarting $DESC: $NAME... " 29.55 + action 'Restarting %s: %s...' "$DESC" $NAME 29.56 kill $(cat $PIDFILE) 29.57 rm $PIDFILE 29.58 sleep 2 29.59 $DAEMON $OPTIONS 29.60 - status ;; 29.61 - 29.62 - *) 29.63 - echo "Usage: /etc/init.d/$(basename $0) [start|stop|restart]" 29.64 - exit 1 ;; 29.65 + status 29.66 + ;; 29.67 + *) 29.68 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 29.69 + newline 29.70 + exit 1 29.71 + ;; 29.72 esac 29.73 29.74 exit 0
30.1 --- a/distcc/stuff/distccd Wed May 25 23:07:05 2016 +0200 30.2 +++ b/distcc/stuff/distccd Thu May 26 20:16:45 2016 +0300 30.3 @@ -1,5 +1,5 @@ 30.4 #!/bin/sh 30.5 -# /etc/init.d/distccd: Start, stop and restart Distcc daemon on SliTaz, 30.6 +# /etc/init.d/distccd: Start, stop and restart Distcc daemon on SliTaz, 30.7 # at boot time or with the command line. Daemons options are configured 30.8 # with /etc/daemons.conf 30.9 # 30.10 @@ -10,7 +10,7 @@ 30.11 { 30.12 if [ -s /etc/distcc/hosts.allow ]; then 30.13 for i in $(cat /etc/distcc/clients.allow); do 30.14 - ( echo $i | grep -q '^#' ) && continue 30.15 + ( echo $i | grep -q '^#' ) && continue 30.16 ALLOW_HOST="$ALLOW_HOST --allow $i" 30.17 done 30.18 else 30.19 @@ -20,7 +20,7 @@ 30.20 } 30.21 30.22 NAME=Distccd 30.23 -DESC="Distcc daemon" 30.24 +DESC="$(_ '%s daemon' Distcc)" 30.25 DAEMON="/usr/bin/distccd" 30.26 LOGFILE="/var/log/distccd/distccd.log" 30.27 PIDFILE="/var/run/distccd/distccd.pid" 30.28 @@ -35,35 +35,34 @@ 30.29 case "$1" in 30.30 start) 30.31 if active_pidfile $PIDFILE distccd ; then 30.32 - echo "$NAME already running." 30.33 + _ '%s is already running.' $NAME 30.34 exit 1 30.35 fi 30.36 - echo -n "Starting $DESC: $NAME... " 30.37 - $DAEMON $OPTIONS 30.38 + action 'Starting %s: %s...' "$DESC" $NAME 30.39 + $DAEMON $OPTIONS 30.40 status 30.41 ;; 30.42 stop) 30.43 if ! active_pidfile $PIDFILE distccd ; then 30.44 - echo "$NAME is not running." 30.45 + _ '%s is not running.' $NAME 30.46 exit 1 30.47 fi 30.48 - echo -n "Stopping $DESC: $NAME... " 30.49 + action 'Stopping %s: %s...' "$DESC" $NAME 30.50 kill -15 $(cat $PIDFILE) 30.51 status 30.52 ;; 30.53 restart) 30.54 if ! active_pidfile $PIDFILE distccd ; then 30.55 - echo "$NAME is not running." 30.56 + _ '%s is not running.' $NAME 30.57 exit 1 30.58 fi 30.59 - echo -n "Restarting $DESC: $NAME... " 30.60 + action 'Restarting %s: %s...' "$DESC" $NAME 30.61 $DAEMON $OPTIONS -k restart 30.62 status 30.63 ;; 30.64 *) 30.65 - echo "" 30.66 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 30.67 - echo "" 30.68 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 30.69 + newline 30.70 exit 1 30.71 ;; 30.72 esac
31.1 --- a/dnsmasq/stuff/etc/init.d/dnsmasq Wed May 25 23:07:05 2016 +0200 31.2 +++ b/dnsmasq/stuff/etc/init.d/dnsmasq Thu May 26 20:16:45 2016 +0300 31.3 @@ -9,7 +9,7 @@ 31.4 . /etc/daemons.conf 31.5 31.6 NAME=DNSmasq 31.7 -DESC="dnsmasq deamon" 31.8 +DESC="$(_ '%s daemon' dnsmasq)" 31.9 DAEMON=/usr/sbin/dnsmasq 31.10 OPTIONS=$DNSMASQ_OPTIONS 31.11 PIDFILE=/var/run/dnsmasq.pid 31.12 @@ -17,39 +17,38 @@ 31.13 case "$1" in 31.14 start) 31.15 if active_pidfile $PIDFILE dnsmasq ; then 31.16 - echo "$NAME already running." 31.17 + _ '%s is already running.' $NAME 31.18 exit 1 31.19 fi 31.20 - echo -n "Starting $DESC: $NAME... " 31.21 - $DAEMON $OPTIONS 31.22 + action 'Starting %s: %s...' "$DESC" $NAME 31.23 + $DAEMON $OPTIONS 31.24 status 31.25 ;; 31.26 stop) 31.27 if ! active_pidfile $PIDFILE dnsmasq ; then 31.28 - echo "$NAME is not running." 31.29 + _ '%s is not running.' $NAME 31.30 exit 1 31.31 fi 31.32 - echo -n "Stopping $DESC: $NAME... " 31.33 - kill `cat $PIDFILE` 31.34 + action 'Stopping %s: %s...' "$DESC" $NAME 31.35 + kill $(cat $PIDFILE) 31.36 rm $PIDFILE 31.37 status 31.38 ;; 31.39 restart) 31.40 if ! active_pidfile $PIDFILE dnsmasq ; then 31.41 - echo "$NAME is not running." 31.42 + _ '%s is not running.' $NAME 31.43 exit 1 31.44 fi 31.45 - echo -n "Restarting $DESC: $NAME... " 31.46 - kill `cat $PIDFILE` 31.47 + action 'Restarting %s: %s...' "$DESC" $NAME 31.48 + kill $(cat $PIDFILE) 31.49 rm $PIDFILE 31.50 sleep 2 31.51 $DAEMON $OPTIONS 31.52 status 31.53 ;; 31.54 *) 31.55 - echo "" 31.56 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 31.57 - echo "" 31.58 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 31.59 + newline 31.60 exit 1 31.61 ;; 31.62 esac
32.1 --- a/dovecot/stuff/init.d/dovecot Wed May 25 23:07:05 2016 +0200 32.2 +++ b/dovecot/stuff/init.d/dovecot Thu May 26 20:16:45 2016 +0300 32.3 @@ -1,5 +1,5 @@ 32.4 #!/bin/sh 32.5 -# /etc/init.d/dovecot : Start, stop and restart Dovecotserver on SliTaz, at 32.6 +# /etc/init.d/dovecot : Start, stop and restart Dovecotserver on SliTaz, at 32.7 # boot time or with the command line. 32.8 # 32.9 # To start SSH server at boot time, just put dovecot in the $RUN_DAEMONS 32.10 @@ -9,7 +9,7 @@ 32.11 . /etc/daemons.conf 32.12 32.13 NAME=dovecot 32.14 -DESC="Dovecot daemon" 32.15 +DESC="$(_ '%s daemon' Dovecot)" 32.16 DAEMON=/usr/sbin/dovecot 32.17 OPTIONS=$dovecot_OPTIONS 32.18 PIDFILE=/var/run/dovecot/master.pid 32.19 @@ -21,37 +21,36 @@ 32.20 case "$1" in 32.21 start) 32.22 if active_pidfile $PIDFILE dovecot ; then 32.23 - echo "$NAME already running." 32.24 + _ '%s is already running.' $NAME 32.25 exit 1 32.26 fi 32.27 - echo -n "Starting $DESC: $NAME... " 32.28 + action 'Starting %s: %s...' "$DESC" $NAME 32.29 $DAEMON $OPTIONS 32.30 status 32.31 ;; 32.32 stop) 32.33 if ! active_pidfile $PIDFILE dovecot ; then 32.34 - echo "$NAME is not running." 32.35 + _ '%s is not running.' $NAME 32.36 exit 1 32.37 fi 32.38 - echo -n "Stopping $DESC: $NAME... " 32.39 - kill `cat $PIDFILE` 32.40 + action 'Stopping %s: %s...' "$DESC" $NAME 32.41 + kill $(cat $PIDFILE) 32.42 status 32.43 ;; 32.44 restart) 32.45 if ! active_pidfile $PIDFILE dovecot ; then 32.46 - echo "$NAME is not running." 32.47 + _ '%s is not running.' $NAME 32.48 exit 1 32.49 fi 32.50 - echo -n "Restarting $DESC: $NAME... " 32.51 - kill `cat $PIDFILE` 32.52 + action 'Restarting %s: %s...' "$DESC" $NAME 32.53 + kill $(cat $PIDFILE) 32.54 sleep 2 32.55 $DAEMON $OPTIONS 32.56 status 32.57 ;; 32.58 *) 32.59 - echo "" 32.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 32.61 - echo "" 32.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 32.63 + newline 32.64 exit 1 32.65 ;; 32.66 esac
33.1 --- a/dropbear/stuff/init.d/dropbear Wed May 25 23:07:05 2016 +0200 33.2 +++ b/dropbear/stuff/init.d/dropbear Thu May 26 20:16:45 2016 +0300 33.3 @@ -1,5 +1,5 @@ 33.4 #!/bin/sh 33.5 -# /etc/init.d/dropbear : Start, stop and restart SSH server on SliTaz, at 33.6 +# /etc/init.d/dropbear : Start, stop and restart SSH server on SliTaz, at 33.7 # boot time or with the command line. 33.8 # 33.9 # To start SSH server at boot time, just put dropbear in the $RUN_DAEMONS 33.10 @@ -9,7 +9,7 @@ 33.11 . /etc/daemons.conf 33.12 33.13 NAME=Dropbear 33.14 -DESC="SSH server" 33.15 +DESC="$(_ '%s server' SSH)" 33.16 DAEMON=/usr/sbin/dropbear 33.17 OPTIONS=$DROPBEAR_OPTIONS 33.18 PIDFILE=/var/run/dropbear.pid 33.19 @@ -18,51 +18,50 @@ 33.20 start) 33.21 # We need rsa and dss host key file to start dropbear. 33.22 if [ ! -s /etc/dropbear/dropbear_rsa_host_key ] ; then 33.23 - echo -n "Generating $NAME rsa key... " 33.24 + action 'Generating Dropbear %s key...' RSA 33.25 # Need to delete key before creating it. 33.26 rm -f /etc/dropbear/dropbear_rsa_host_key 33.27 - dropbearkey -t rsa -f /etc/dropbear/dropbear_rsa_host_key > /dev/null 2>&1 33.28 + dropbearkey -t rsa -f /etc/dropbear/dropbear_rsa_host_key >/dev/null 2>&1 33.29 status 33.30 fi 33.31 if [ ! -s /etc/dropbear/dropbear_dss_host_key ] ; then 33.32 - echo -n "Generating $NAME dss key... " 33.33 + action 'Generating Dropbear %s key...' DSS 33.34 # Need to delete key before creating it. 33.35 rm -f /etc/dropbear/dropbear_dss_host_key 33.36 - dropbearkey -t dss -f /etc/dropbear/dropbear_dss_host_key > /dev/null 2>&1 33.37 + dropbearkey -t dss -f /etc/dropbear/dropbear_dss_host_key >/dev/null 2>&1 33.38 status 33.39 fi 33.40 if active_pidfile $PIDFILE dropbear ; then 33.41 - echo "$NAME already running." 33.42 + _ '%s is already running.' $NAME 33.43 exit 1 33.44 fi 33.45 - echo -n "Starting $DESC: $NAME... " 33.46 + action 'Starting %s: %s...' "$DESC" $NAME 33.47 $DAEMON $OPTIONS 33.48 status 33.49 ;; 33.50 stop) 33.51 if ! active_pidfile $PIDFILE dropbear ; then 33.52 - echo "$NAME is not running." 33.53 + _ '%s is not running.' $NAME 33.54 exit 1 33.55 fi 33.56 - echo -n "Stopping $DESC: $NAME... " 33.57 - kill `cat $PIDFILE` 33.58 + action 'Stopping %s: %s...' "$DESC" $NAME 33.59 + kill $(cat $PIDFILE) 33.60 status 33.61 ;; 33.62 restart) 33.63 if ! active_pidfile $PIDFILE dropbear ; then 33.64 - echo "$NAME is not running." 33.65 + _ '%s is not running.' $NAME 33.66 exit 1 33.67 fi 33.68 - echo -n "Restarting $DESC: $NAME... " 33.69 - kill `cat $PIDFILE` 33.70 + action 'Restarting %s: %s...' "$DESC" $NAME 33.71 + kill $(cat $PIDFILE) 33.72 sleep 2 33.73 $DAEMON $OPTIONS 33.74 status 33.75 ;; 33.76 *) 33.77 - echo "" 33.78 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 33.79 - echo "" 33.80 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 33.81 + newline 33.82 exit 1 33.83 ;; 33.84 esac
34.1 --- a/fail2ban/stuff/etc/init.d/fail2ban Wed May 25 23:07:05 2016 +0200 34.2 +++ b/fail2ban/stuff/etc/init.d/fail2ban Thu May 26 20:16:45 2016 +0300 34.3 @@ -1,5 +1,5 @@ 34.4 #!/bin/sh 34.5 -# /etc/init.d/fail2ban: Start, stop and restart Apache web server on SliTaz, 34.6 +# /etc/init.d/fail2ban: Start, stop and restart Apache web server on SliTaz, 34.7 # at boot time or with the command line. Daemons options are configured 34.8 # with /etc/daemons.conf 34.9 # 34.10 @@ -7,7 +7,7 @@ 34.11 . /etc/daemons.conf 34.12 34.13 NAME=Fail2ban 34.14 -DESC="Fail2ban Server" 34.15 +DESC="$(_ '%s server' Fail2ban)" 34.16 DAEMON=/usr/bin/fail2ban-client 34.17 OPTIONS= 34.18 PIDFILE=/var/run/fail2ban/fail2ban.pid 34.19 @@ -16,43 +16,42 @@ 34.20 case "$1" in 34.21 start) 34.22 if active_pidfile $PIDFILE fail2ban-server ; then 34.23 - echo "$NAME already running." 34.24 + _ '%s is already running.' $NAME 34.25 exit 1 34.26 fi 34.27 - echo -n "Starting $DESC: $NAME... " 34.28 + action 'Starting %s: %s...' "$DESC" $NAME 34.29 rm -f $SOCKET 34.30 - $DAEMON start > /dev/null 34.31 + $DAEMON start >/dev/null 34.32 status 34.33 ;; 34.34 stop) 34.35 - echo -n "Stopping $DESC: $NAME... " 34.36 + action 'Stopping %s: %s...' "$DESC" $NAME 34.37 $DAEMON stop 34.38 rm -f $PIDFILE 34.39 status 34.40 ;; 34.41 reload) 34.42 if ! active_pidfile $PIDFILE fail2ban-server ; then 34.43 - echo "$NAME is not running." 34.44 + _ '%s is not running.' $NAME 34.45 exit 1 34.46 fi 34.47 - echo -n "Stopping $DESC: $NAME... " 34.48 + action 'Stopping %s: %s...' "$DESC" $NAME 34.49 $DAEMON stop 34.50 status 34.51 ;; 34.52 restart) 34.53 if ! active_pidfile $PIDFILE fail2ban-server ; then 34.54 - echo "$NAME is not running." 34.55 + _ '%s is not running.' $NAME 34.56 exit 1 34.57 fi 34.58 - echo -n "Restarting $DESC: $NAME... " 34.59 + action 'Restarting %s: %s...' "$DESC" $NAME 34.60 $0 stop 34.61 $0 start 34.62 status 34.63 ;; 34.64 *) 34.65 - echo "" 34.66 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|reload|restart]" 34.67 - echo "" 34.68 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload]" 34.69 + newline 34.70 exit 1 34.71 ;; 34.72 esac
35.1 --- a/fcron/receipt Wed May 25 23:07:05 2016 +0200 35.2 +++ b/fcron/receipt Thu May 26 20:16:45 2016 +0300 35.3 @@ -17,7 +17,6 @@ 35.4 # Rules to configure and make the package. 35.5 compile_rules() 35.6 { 35.7 - cd $src 35.8 ./configure \ 35.9 --prefix=/usr \ 35.10 --sysconfdir=/etc \ 35.11 @@ -38,11 +37,12 @@ 35.12 # Rules to gen a SliTaz package suitable for Tazpkg. 35.13 genpkg_rules() 35.14 { 35.15 - mkdir -p $fs/usr/ 35.16 + mkdir -p $fs/usr/ $fs/etc/init.d 35.17 + 35.18 cp -a $install/usr/bin $fs/usr 35.19 cp -a $install/usr/sbin/fcron $fs/usr/bin 35.20 - cp -a $install/var $fs/ 35.21 - cp -a $install/etc $fs/ 35.22 - 35.23 + cp -a $install/var $fs 35.24 + cp -a $install/etc $fs 35.25 + 35.26 cp -a stuff/fcron $fs/etc/init.d 35.27 }
36.1 --- a/fcron/stuff/fcron Wed May 25 23:07:05 2016 +0200 36.2 +++ b/fcron/stuff/fcron Thu May 26 20:16:45 2016 +0300 36.3 @@ -1,5 +1,5 @@ 36.4 #!/bin/sh 36.5 -# /etc/init.d/fcron : Start, stop and fcron on SliTaz, at 36.6 +# /etc/init.d/fcron : Start, stop and fcron on SliTaz, at 36.7 # boot time or with the command line. 36.8 # 36.9 # To start SSH server at boot time, just put fcron in the $RUN_DAEMONS 36.10 @@ -9,7 +9,7 @@ 36.11 . /etc/daemons.conf 36.12 36.13 NAME=fcron 36.14 -DESC="Cron daemon" 36.15 +DESC="$(_ '%s daemon' Cron)" 36.16 DAEMON=/usr/bin/fcron 36.17 OPTIONS=-b 36.18 PIDFILE=/var/run/fcron.pid 36.19 @@ -17,37 +17,36 @@ 36.20 case "$1" in 36.21 start) 36.22 if active_pidfile $PIDFILE fcron ; then 36.23 - echo "$NAME already running." 36.24 + _ '%s is already running.' $NAME 36.25 exit 1 36.26 fi 36.27 - echo -n "Starting $DESC: $NAME... " 36.28 + action 'Starting %s: %s...' "$DESC" $NAME 36.29 $DAEMON $OPTIONS 36.30 status 36.31 ;; 36.32 stop) 36.33 if ! active_pidfile $PIDFILE fcron ; then 36.34 - echo "$NAME is not running." 36.35 + _ '%s is not running.' $NAME 36.36 exit 1 36.37 fi 36.38 - echo -n "Stopping $DESC: $NAME... " 36.39 - kill `cat $PIDFILE` 36.40 + action 'Stopping %s: %s...' "$DESC" $NAME 36.41 + kill $(cat $PIDFILE) 36.42 status 36.43 ;; 36.44 restart) 36.45 if ! active_pidfile $PIDFILE fcron ; then 36.46 - echo "$NAME is not running." 36.47 + _ '%s is not running.' $NAME 36.48 exit 1 36.49 fi 36.50 - echo -n "Restarting $DESC: $NAME... " 36.51 - kill `cat $PIDFILE` 36.52 + action 'Restarting %s: %s...' "$DESC" $NAME 36.53 + kill $(cat $PIDFILE) 36.54 sleep 2 36.55 $DAEMON $OPTIONS 36.56 status 36.57 ;; 36.58 *) 36.59 - echo "" 36.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 36.61 - echo "" 36.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 36.63 + newline 36.64 exit 1 36.65 ;; 36.66 esac
37.1 --- a/git/stuff/git-daemon Wed May 25 23:07:05 2016 +0200 37.2 +++ b/git/stuff/git-daemon Thu May 26 20:16:45 2016 +0300 37.3 @@ -9,7 +9,7 @@ 37.4 . /etc/daemons.conf 37.5 37.6 NAME=git-daemon 37.7 -DESC="git-daemon daemon" 37.8 +DESC="$(_ '%s daemon' Git)" 37.9 DAEMON=/usr/lib/git-core/git-daemon 37.10 OPTIONS=$GIT_OPTIONS 37.11 PIDFILE=/var/run/git-daemon.pid 37.12 @@ -17,37 +17,36 @@ 37.13 case "$1" in 37.14 start) 37.15 if active_pidfile $PIDFILE git-daemon ; then 37.16 - echo "$NAME already running." 37.17 + _ '%s is already running.' $NAME 37.18 exit 1 37.19 fi 37.20 - echo -n "Starting $DESC: $NAME... " 37.21 + action 'Starting %s: %s...' "$DESC" $NAME 37.22 $DAEMON --pid-file=$PIDFILE $OPTIONS 37.23 status 37.24 ;; 37.25 stop) 37.26 if ! active_pidfile $PIDFILE git-daemon ; then 37.27 - echo "$NAME is not running." 37.28 + _ '%s is not running.' $NAME 37.29 exit 1 37.30 fi 37.31 - echo -n "Stopping $DESC: $NAME... " 37.32 - kill `cat $PIDFILE` 37.33 + action 'Stopping %s: %s...' "$DESC" $NAME 37.34 + kill $(cat $PIDFILE) 37.35 status 37.36 ;; 37.37 restart) 37.38 if ! active_pidfile $PIDFILE git-daemon ; then 37.39 - echo "$NAME is not running." 37.40 + _ '%s is not running.' $NAME 37.41 exit 1 37.42 fi 37.43 - echo -n "Restarting $DESC: $NAME... " 37.44 - kill `cat $PIDFILE` 37.45 + action 'Restarting %s: %s...' "$DESC" $NAME 37.46 + kill $(cat $PIDFILE) 37.47 sleep 2 37.48 $DAEMON $OPTIONS 37.49 status 37.50 ;; 37.51 *) 37.52 - echo "" 37.53 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 37.54 - echo "" 37.55 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 37.56 + newline 37.57 exit 1 37.58 ;; 37.59 esac
38.1 --- a/gpm/stuff/etc/init.d/gpm Wed May 25 23:07:05 2016 +0200 38.2 +++ b/gpm/stuff/etc/init.d/gpm Thu May 26 20:16:45 2016 +0300 38.3 @@ -1,5 +1,5 @@ 38.4 #!/bin/sh 38.5 -# /etc/init.d/gpm : Start, stop and restart gpm server on SliTaz, at 38.6 +# /etc/init.d/gpm : Start, stop and restart gpm server on SliTaz, at 38.7 # boot time or with the command line. 38.8 # 38.9 # To start gpm server at boot time, just put mysql in the $RUN_DAEMONS 38.10 @@ -9,7 +9,7 @@ 38.11 . /etc/daemons.conf 38.12 38.13 NAME=gpm 38.14 -DESC="gpm server" 38.15 +DESC="$(_ '%s server' GPM)" 38.16 DAEMON=/usr/sbin/gpm 38.17 OPTIONS=$GPM_OPTIONS 38.18 [ -n "$OPTIONS" ] || OPTIONS="-m /dev/psaux -t ps2" 38.19 @@ -17,34 +17,36 @@ 38.20 case "$1" in 38.21 start) 38.22 if active_pidfile $PIDFILE gpm ; then 38.23 - echo "$NAME already running." 38.24 + _ '%s is already running.' $NAME 38.25 exit 1 38.26 fi 38.27 + action 'Starting %s: %s...' "$DESC" $NAME 38.28 $DAEMON $OPTIONS 38.29 status 38.30 ;; 38.31 stop) 38.32 if ! active_pidfile $PIDFILE gpm ; then 38.33 - echo "$NAME is not running." 38.34 + _ '%s is not running.' $NAME 38.35 exit 1 38.36 fi 38.37 + action 'Stopping %s: %s...' "$DESC" $NAME 38.38 $DAEMON -k 38.39 status 38.40 ;; 38.41 restart) 38.42 if ! active_pidfile $PIDFILE gpm ; then 38.43 - echo "$NAME is not running." 38.44 + _ '%s is not running.' $NAME 38.45 exit 1 38.46 fi 38.47 + action 'Restarting %s: %s...' "$DESC" $NAME 38.48 $DAEMON -k 38.49 status 38.50 $DAEMON $OPTIONS 38.51 status 38.52 ;; 38.53 *) 38.54 - echo "" 38.55 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 38.56 - echo "" 38.57 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 38.58 + newline 38.59 exit 1 38.60 ;; 38.61 esac
39.1 --- a/hal/stuff/etc/init.d/hald Wed May 25 23:07:05 2016 +0200 39.2 +++ b/hal/stuff/etc/init.d/hald Thu May 26 20:16:45 2016 +0300 39.3 @@ -7,7 +7,7 @@ 39.4 . /etc/daemons.conf 39.5 39.6 NAME=HAL 39.7 -DESC="Hardware Abstraction Layer" 39.8 +DESC="$(_ 'Hardware Abstraction Layer')" 39.9 DAEMON=/usr/sbin/hald 39.10 OPTIONS=$HALD_OPTIONS 39.11 PIDFILE=/run/hald/pid 39.12 @@ -15,37 +15,36 @@ 39.13 case "$1" in 39.14 start) 39.15 if active_pidfile $PIDFILE hald ; then 39.16 - echo "$NAME already running." 39.17 + _ '%s is already running.' $NAME 39.18 exit 1 39.19 fi 39.20 - echo -n "Starting $DESC: $NAME... " 39.21 + action 'Starting %s: %s...' "$DESC" $NAME 39.22 mkdir -p $(dirname $PIDFILE) 39.23 $DAEMON $OPTIONS 39.24 status ;; 39.25 stop) 39.26 if ! active_pidfile $PIDFILE hald ; then 39.27 - echo "$NAME is not running." 39.28 + _ '%s is not running.' $NAME 39.29 exit 1 39.30 fi 39.31 - echo -n "Stopping $DESC: $NAME... " 39.32 + action 'Stopping %s: %s...' "$DESC" $NAME 39.33 kill $(cat $PIDFILE) 39.34 rm $PIDFILE 39.35 status ;; 39.36 restart) 39.37 if ! active_pidfile $PIDFILE hald ; then 39.38 - echo "$NAME is not running." 39.39 + _ '%s is not running.' $NAME 39.40 exit 1 39.41 fi 39.42 - echo -n "Restarting $DESC: $NAME... " 39.43 + action 'Restarting %s: %s...' "$DESC" $NAME 39.44 kill $(cat $PIDFILE) 39.45 rm $PIDFILE 39.46 sleep 2 39.47 $DAEMON $OPTIONS 39.48 status ;; 39.49 *) 39.50 - echo "" 39.51 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 39.52 - echo "" 39.53 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 39.54 + newline 39.55 exit 1 ;; 39.56 esac 39.57
40.1 --- a/hostapd/stuff/hostapd Wed May 25 23:07:05 2016 +0200 40.2 +++ b/hostapd/stuff/hostapd Thu May 26 20:16:45 2016 +0300 40.3 @@ -7,7 +7,7 @@ 40.4 . /etc/daemons.conf 40.5 40.6 NAME=hostapd 40.7 -DESC="daemon for wireless software access points" 40.8 +DESC="$(_ 'daemon for wireless software access points')" 40.9 DAEMON=/usr/bin/hostapd 40.10 PIDFILE=/var/run/hostapd.pid 40.11 OPTIONS="-B -P $PIDFILE /etc/hostapd/hostapd.conf" 40.12 @@ -15,39 +15,38 @@ 40.13 case "$1" in 40.14 start) 40.15 if active_pidfile $PIDFILE hostapd ; then 40.16 - echo "$NAME already running." 40.17 + _ '%s is already running.' $NAME 40.18 exit 1 40.19 fi 40.20 - echo -n "Starting $DESC: $NAME... " 40.21 + action 'Starting %s: %s...' "$DESC" $NAME 40.22 $DAEMON $OPTIONS 40.23 status 40.24 ;; 40.25 stop) 40.26 if ! active_pidfile $PIDFILE hostapd ; then 40.27 - echo "$NAME is not running." 40.28 + _ '%s is not running.' $NAME 40.29 exit 1 40.30 fi 40.31 - echo -n "Stopping $DESC: $NAME... " 40.32 - kill `cat $PIDFILE` 40.33 + action 'Stopping %s: %s...' "$DESC" $NAME 40.34 + kill $(cat $PIDFILE) 40.35 status 40.36 ;; 40.37 restart) 40.38 if ! active_pidfile $PIDFILE hostapd ; then 40.39 - echo "$NAME is not running." 40.40 + _ '%s is not running.' $NAME 40.41 exit 1 40.42 fi 40.43 - echo -n "Restarting $DESC: $NAME... " 40.44 - kill `cat $PIDFILE` 40.45 + action 'Restarting %s: %s...' "$DESC" $NAME 40.46 + kill $(cat $PIDFILE) 40.47 sleep 2 40.48 $DAEMON $OPTIONS 40.49 status 40.50 ;; 40.51 *) 40.52 - echo "" 40.53 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 40.54 - echo "" 40.55 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 40.56 + newline 40.57 exit 1 40.58 ;; 40.59 esac 40.60 40.61 -exit 0 40.62 \ No newline at end of file 40.63 +exit 0
41.1 --- a/knock/stuff/etc/init.d/knock Wed May 25 23:07:05 2016 +0200 41.2 +++ b/knock/stuff/etc/init.d/knock Thu May 26 20:16:45 2016 +0300 41.3 @@ -1,5 +1,5 @@ 41.4 #!/bin/sh 41.5 -# /etc/init.d/knock : Start, stop and restart knockd server on SliTaz, at 41.6 +# /etc/init.d/knock : Start, stop and restart knockd server on SliTaz, at 41.7 # boot time or with the command line. 41.8 # 41.9 # To start Knock server at boot time, just put knock in the $RUN_DAEMONS 41.10 @@ -9,7 +9,7 @@ 41.11 . /etc/daemons.conf 41.12 41.13 NAME=Knock 41.14 -DESC="Knock server" 41.15 +DESC="$(_ '%s server' knock)" 41.16 DAEMON=/usr/sbin/knockd 41.17 OPTIONS=$KNOCK_OPTIONS 41.18 PIDFILE=/var/run/knockd.pid 41.19 @@ -19,37 +19,36 @@ 41.20 case "$1" in 41.21 start) 41.22 if active_pidfile $PIDFILE knockd ; then 41.23 - echo "$NAME already running." 41.24 + _ '%s is already running.' $NAME 41.25 exit 1 41.26 fi 41.27 - echo -n "Starting $DESC: $NAME... " 41.28 + action 'Starting %s: %s...' "$DESC" $NAME 41.29 $DAEMON $OPTIONS 41.30 status 41.31 ;; 41.32 stop) 41.33 if ! active_pidfile $PIDFILE knockd ; then 41.34 - echo "$NAME is not running." 41.35 + _ '%s is not running.' $NAME 41.36 exit 1 41.37 fi 41.38 - echo -n "Stopping $DESC: $NAME... " 41.39 - kill `cat $PIDFILE` 41.40 + action 'Stopping %s: %s...' "$DESC" $NAME 41.41 + kill $(cat $PIDFILE) 41.42 status 41.43 ;; 41.44 restart) 41.45 if ! active_pidfile $PIDFILE knockd ; then 41.46 - echo "$NAME is not running." 41.47 + _ '%s is not running.' $NAME 41.48 exit 1 41.49 fi 41.50 - echo -n "Restarting $DESC: $NAME... " 41.51 - kill `cat $PIDFILE` 41.52 + action 'Restarting %s: %s...' "$DESC" $NAME 41.53 + kill $(cat $PIDFILE) 41.54 sleep 2 41.55 $DAEMON $OPTIONS 41.56 status 41.57 ;; 41.58 *) 41.59 - echo "" 41.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 41.61 - echo "" 41.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 41.63 + newline 41.64 exit 1 41.65 ;; 41.66 esac
42.1 --- a/lighttpd/stuff/applications/lighttpd-status.desktop Wed May 25 23:07:05 2016 +0200 42.2 +++ b/lighttpd/stuff/applications/lighttpd-status.desktop Thu May 26 20:16:45 2016 +0300 42.3 @@ -1,10 +1,10 @@ 42.4 [Desktop Entry] 42.5 -Encoding=UTF-8 42.6 +Type=Application 42.7 Name=LightTPD server status 42.8 Name[fr]=Status du serveur LightTPD 42.9 Name[pt]=Status do servidor LightTPD 42.10 Name[pt_BR]=Status do servidor LightTPD 42.11 +Name[ru]=Состояние сервера LightTPD 42.12 Exec=browser http://localhost/server-status 42.13 -Icon=text-html 42.14 -Type=Application 42.15 -Categories=System; 42.16 +Icon=network-server 42.17 +Categories=System;Monitor;
43.1 --- a/lighttpd/stuff/etc/init.d/lighttpd Wed May 25 23:07:05 2016 +0200 43.2 +++ b/lighttpd/stuff/etc/init.d/lighttpd Thu May 26 20:16:45 2016 +0300 43.3 @@ -1,5 +1,5 @@ 43.4 #!/bin/sh 43.5 -# /etc/init.d/lighttpd: Start, stop and restart web server on SliTaz, 43.6 +# /etc/init.d/lighttpd: Start, stop and restart web server on SliTaz, 43.7 # at boot time or with the command line. Daemons options are configured 43.8 # with /etc/daemons.conf 43.9 # 43.10 @@ -7,7 +7,7 @@ 43.11 . /etc/daemons.conf 43.12 43.13 NAME=LightTPD 43.14 -DESC="web server" 43.15 +DESC="$(_ 'web server')" 43.16 DAEMON=/usr/sbin/lighttpd 43.17 OPTIONS=$LIGHTTPD_OPTIONS 43.18 PIDFILE=/var/run/lighttpd.pid 43.19 @@ -15,39 +15,38 @@ 43.20 case "$1" in 43.21 start) 43.22 if active_pidfile $PIDFILE lighttpd ; then 43.23 - echo "$NAME already running." 43.24 + _ '%s is already running.' $NAME 43.25 exit 1 43.26 fi 43.27 - echo -n "Starting $DESC: $NAME... " 43.28 - $DAEMON $OPTIONS 43.29 + action 'Starting %s: %s...' "$DESC" $NAME 43.30 + $DAEMON $OPTIONS 43.31 status 43.32 ;; 43.33 stop) 43.34 if ! active_pidfile $PIDFILE lighttpd ; then 43.35 - echo "$NAME is not running." 43.36 + _ '%s is not running.' $NAME 43.37 exit 1 43.38 fi 43.39 - echo -n "Stopping $DESC: $NAME... " 43.40 - kill `cat $PIDFILE` 43.41 + action 'Stopping %s: %s...' "$DESC" $NAME 43.42 + kill $(cat $PIDFILE) 43.43 rm $PIDFILE 43.44 status 43.45 ;; 43.46 restart) 43.47 if ! active_pidfile $PIDFILE lighttpd ; then 43.48 - echo "$NAME is not running." 43.49 + _ '%s is not running.' $NAME 43.50 exit 1 43.51 fi 43.52 - echo -n "Restarting $DESC: $NAME... " 43.53 - kill `cat $PIDFILE` 43.54 + action 'Restarting %s: %s...' "$DESC" $NAME 43.55 + kill $(cat $PIDFILE) 43.56 rm $PIDFILE 43.57 sleep 2 43.58 $DAEMON $OPTIONS 43.59 status 43.60 ;; 43.61 *) 43.62 - echo "" 43.63 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 43.64 - echo "" 43.65 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 43.66 + newline 43.67 exit 1 43.68 ;; 43.69 esac
44.1 --- a/linux-zram/stuff/compcache Wed May 25 23:07:05 2016 +0200 44.2 +++ b/linux-zram/stuff/compcache Thu May 26 20:16:45 2016 +0300 44.3 @@ -7,39 +7,39 @@ 44.4 source /etc/compcache.conf 44.5 44.6 NAME="compcache" 44.7 -EXIST=`cat /proc/swaps | grep zram0` 44.8 +DESC="$(_ '%s daemon' compcache)" 44.9 +EXIST=$(cat /proc/swaps | grep zram0) 44.10 44.11 case "$1" in 44.12 start) 44.13 - if [ ! "$EXIST" = "" ] ; then 44.14 - echo "$NAME already running." 44.15 + if [ -n "$EXIST" ] ; then 44.16 + _ '%s is already running.' $NAME 44.17 exit 1 44.18 fi 44.19 - echo -n "Loading module" 44.20 + action 'Loading module...' 44.21 modprobe zram zram_num_devices=1 && 44.22 [ -n "$SIZE_KB" ] && echo $(($SIZE_KB * 1024)) > /sys/block/zram0/disksize 44.23 status 44.24 44.25 - echo -n "Starting $NAME..." 44.26 + action 'Starting %s: %s...' "$DESC" $NAME 44.27 mkswap /dev/zram0 && swapon /dev/zram0 -p 100 44.28 status 44.29 ;; 44.30 stop) 44.31 - if [ "$EXIST" = "" ] ; then 44.32 - echo "$NAME is not running." 44.33 + if [ -z "$EXIST" ] ; then 44.34 + _ '%s is not running.' $NAME 44.35 exit 1 44.36 fi 44.37 - echo -n "Stopping $NAME... " 44.38 + action 'Stopping %s: %s...' "$DESC" $NAME 44.39 swapoff /dev/zram0 && echo 1 > /sys/block/zram0/reset 44.40 status 44.41 - echo -n "Unloading module" 44.42 + action 'Unloading module...' 44.43 rmmod zram 44.44 status 44.45 ;; 44.46 *) 44.47 - echo "" 44.48 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop]" 44.49 - echo "" 44.50 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop]" 44.51 + newline 44.52 exit 1 44.53 ;; 44.54 esac
45.1 --- a/linux64-zram/stuff/compcache Wed May 25 23:07:05 2016 +0200 45.2 +++ b/linux64-zram/stuff/compcache Thu May 26 20:16:45 2016 +0300 45.3 @@ -7,39 +7,39 @@ 45.4 source /etc/compcache.conf 45.5 45.6 NAME="compcache" 45.7 -EXIST=`cat /proc/swaps | grep zram0` 45.8 +DESC="$(_ '%s daemon' compcache)" 45.9 +EXIST=$(cat /proc/swaps | grep zram0) 45.10 45.11 case "$1" in 45.12 start) 45.13 - if [ ! "$EXIST" = "" ] ; then 45.14 - echo "$NAME already running." 45.15 + if [ -n "$EXIST" ] ; then 45.16 + _ '%s is already running.' $NAME 45.17 exit 1 45.18 fi 45.19 - echo -n "Loading module" 45.20 + action 'Loading module...' 45.21 modprobe zram zram_num_devices=1 && 45.22 [ -n "$SIZE_KB" ] && echo $(($SIZE_KB * 1024)) > /sys/block/zram0/disksize 45.23 status 45.24 45.25 - echo -n "Starting $NAME..." 45.26 + action 'Starting %s: %s...' "$DESC" $NAME 45.27 mkswap /dev/zram0 && swapon /dev/zram0 -p 100 45.28 status 45.29 ;; 45.30 stop) 45.31 - if [ "$EXIST" = "" ] ; then 45.32 - echo "$NAME is not running." 45.33 + if [ -z "$EXIST" ] ; then 45.34 + _ '%s is not running.' $NAME 45.35 exit 1 45.36 fi 45.37 - echo -n "Stopping $NAME... " 45.38 + action 'Stopping %s: %s...' "$DESC" $NAME 45.39 swapoff /dev/zram0 && echo 1 > /sys/block/zram0/reset 45.40 status 45.41 - echo -n "Unloading module" 45.42 + action 'Unloading module...' 45.43 rmmod zram 45.44 status 45.45 ;; 45.46 *) 45.47 - echo "" 45.48 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop]" 45.49 - echo "" 45.50 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop]" 45.51 + newline 45.52 exit 1 45.53 ;; 45.54 esac
46.1 --- a/lxdm/stuff/init.d/lxdm Wed May 25 23:07:05 2016 +0200 46.2 +++ b/lxdm/stuff/init.d/lxdm Thu May 26 20:16:45 2016 +0300 46.3 @@ -8,43 +8,43 @@ 46.4 . /etc/init.d/rc.functions 46.5 46.6 NAME=LXDM 46.7 -DESC="LXDE login manager" 46.8 +DESC="$(_ 'LXDE login manager')" 46.9 DAEMON=/usr/sbin/lxdm 46.10 PIDFILE=/var/run/lxdm.pid 46.11 46.12 case "$1" in 46.13 start) 46.14 if active_pidfile $PIDFILE lxdm ; then 46.15 - echo "$NAME already running." 46.16 + _ '%s is already running.' $NAME 46.17 exit 1 46.18 fi 46.19 - echo -n "Starting $DESC: $NAME... " 46.20 + action 'Starting %s: %s...' "$DESC" $NAME 46.21 $DAEMON $OPTION 46.22 status ;; 46.23 stop) 46.24 if ! active_pidfile $PIDFILE lxdm ; then 46.25 - echo "$NAME is not running." 46.26 + _ '%s is not running.' $NAME 46.27 exit 1 46.28 fi 46.29 - echo -n "Stopping $DESC: $NAME... " 46.30 + action 'Stopping %s: %s...' "$DESC" $NAME 46.31 killall lxdm 46.32 rm $PIDFILE 46.33 status ;; 46.34 restart) 46.35 if ! active_pidfile $PIDFILE lxdm ; then 46.36 - echo "$NAME is not running." 46.37 + _ '%s is not running.' 46.38 exit 1 46.39 fi 46.40 - echo -n "Restarting $DESC: $NAME... " 46.41 + action 'Restarting %s: %s...' "$DESC" $NAME 46.42 killall lxdm 46.43 rm $PIDFILE 46.44 sleep 2 46.45 $DAEMON $OPTION 46.46 status ;; 46.47 *) 46.48 - echo "" 46.49 - echo -e "\033[1mUsage:\033[0m /etc/init.d/$(basename $0) [start|stop|restart]" 46.50 - echo "" && exit 1 ;; 46.51 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 46.52 + newline 46.53 + exit 1 ;; 46.54 esac 46.55 46.56 exit 0
47.1 --- a/lxnetdaemon/stuff/etc/init.d/lxnetdaemon Wed May 25 23:07:05 2016 +0200 47.2 +++ b/lxnetdaemon/stuff/etc/init.d/lxnetdaemon Thu May 26 20:16:45 2016 +0300 47.3 @@ -1,5 +1,5 @@ 47.4 #!/bin/sh 47.5 -# /etc/init.d/lxnetdaemon: Start, stop and restart LXnetdaemon deamon on 47.6 +# /etc/init.d/lxnetdaemon: Start, stop and restart LXnetdaemon deamon on 47.7 # SliTaz, at boot time or with the command line. 47.8 # 47.9 # To start daemon at boot time, just put the right name in the $RUN_DAEMONS 47.10 @@ -9,38 +9,38 @@ 47.11 . /etc/daemons.conf 47.12 47.13 NAME=LXnetdaemon 47.14 -DESC="Network daemon" 47.15 +DESC="$(_ 'Network daemon')" 47.16 DAEMON=/usr/bin/lxnetdaemon 47.17 PIDFILE=/var/run/lxnetdaemon.pid 47.18 47.19 case "$1" in 47.20 start) 47.21 if active_pidfile $PIDFILE lxnetdaemon ; then 47.22 - echo "$NAME already running." 47.23 + _ '%s is already running.' $NAME 47.24 exit 1 47.25 fi 47.26 - echo -n "Starting $DESC: $NAME... " 47.27 - $DAEMON $OPTIONS 47.28 + action 'Starting %s: %s...' "$DESC" $NAME 47.29 + $DAEMON $OPTIONS 47.30 status 47.31 pidof lxnetdaemon > $PIDFILE 47.32 ;; 47.33 stop) 47.34 if ! active_pidfile $PIDFILE lxnetdaemon ; then 47.35 - echo "$NAME is not running." 47.36 + _ '%s is not running.' $NAME 47.37 exit 1 47.38 fi 47.39 - echo -n "Stopping $DESC: $NAME... " 47.40 - kill `cat $PIDFILE` 47.41 + action 'Stopping %s: %s...' "$DESC" $NAME 47.42 + kill $(cat $PIDFILE) 47.43 rm $PIDFILE 47.44 status 47.45 ;; 47.46 restart) 47.47 if ! active_pidfile $PIDFILE lxnetdaemon ; then 47.48 - echo "$NAME is not running." 47.49 + _ '%s is not running.' $NAME 47.50 exit 1 47.51 fi 47.52 - echo -n "Restarting $DESC: $NAME... " 47.53 - kill `cat $PIDFILE` 47.54 + action 'Restarting %s: %s...' "$DESC" $NAME 47.55 + kill $(cat $PIDFILE) 47.56 rm $PIDFILE 47.57 sleep 2 47.58 $DAEMON $OPTIONS 47.59 @@ -48,9 +48,8 @@ 47.60 pidof lxnetdaemon > $PIDFILE 47.61 ;; 47.62 *) 47.63 - echo "" 47.64 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 47.65 - echo "" 47.66 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 47.67 + newline 47.68 exit 1 47.69 ;; 47.70 esac
48.1 --- a/mariadb/stuff/etc/init.d/mysql Wed May 25 23:07:05 2016 +0200 48.2 +++ b/mariadb/stuff/etc/init.d/mysql Thu May 26 20:16:45 2016 +0300 48.3 @@ -1,5 +1,5 @@ 48.4 #!/bin/sh 48.5 -# /etc/init.d/mysql : Start, stop and restart MySQL server on SliTaz, at 48.6 +# /etc/init.d/mysql : Start, stop and restart MySQL server on SliTaz, at 48.7 # boot time or with the command line. 48.8 # 48.9 # To start MySQL server at boot time, just put mysql in the $RUN_DAEMONS 48.10 @@ -9,7 +9,7 @@ 48.11 . /etc/daemons.conf 48.12 48.13 NAME=Mysql 48.14 -DESC="MySQL server" 48.15 +DESC="$(_ '%s server' MySQL)" 48.16 DAEMON=/usr/bin/mysqld_safe 48.17 OPTIONS=$MYSQL_OPTIONS 48.18 PIDFILE=/var/run/mysqld/mysql.pid 48.19 @@ -22,51 +22,51 @@ 48.20 case "$1" in 48.21 start) 48.22 if active_pidfile $PIDFILE mysqld ; then 48.23 - echo "$NAME already running." 48.24 + _ '%s is already running.' $NAME 48.25 exit 1 48.26 fi 48.27 if [ ! -d /var/lib/mysql/mysql ]; then 48.28 - echo "Initializing $DESC: " 48.29 - rm -rf /var/lib/mysql/* 2> /dev/null 48.30 + action 'Initializing %s...' "$DESC" 48.31 + rm -rf /var/lib/mysql/* 2>/dev/null 48.32 mysql_install_db --user=mysql --datadir=/var/lib/mysql 48.33 + status 48.34 fi 48.35 - echo -n "Starting $DESC: $NAME... " 48.36 - $DAEMON $OPTIONS > /dev/null & 48.37 + action 'Starting %s: %s...' "$DESC" $NAME 48.38 + $DAEMON $OPTIONS >/dev/null & 48.39 status 48.40 sleep 2 48.41 for i in /etc/mysql.d/* ; do 48.42 - [ -x $i ] || continue 48.43 - echo -n "Running $i..." 48.44 - $i 48.45 - status 48.46 + [ -x $i ] || continue 48.47 + action 'Running %s...' $i 48.48 + $i 48.49 + status 48.50 done 48.51 ;; 48.52 stop) 48.53 if ! active_pidfile $PIDFILE mysqld ; then 48.54 - echo "$NAME is not running." 48.55 + _ '%s is not running.' $NAME 48.56 exit 1 48.57 fi 48.58 - echo -n "Stopping $DESC: $NAME... " 48.59 - kill `cat $PIDFILE`> /dev/null 48.60 + action 'Stopping %s: %s...' "$DESC" $NAME 48.61 + kill $(cat $PIDFILE) >/dev/null 48.62 status 48.63 sleep 2 48.64 ;; 48.65 restart) 48.66 if ! active_pidfile $PIDFILE mysqld ; then 48.67 - echo "$NAME is not running." 48.68 + _ '%s is not running.' $NAME 48.69 exit 1 48.70 fi 48.71 - echo -n "Restarting $DESC: $NAME... " 48.72 - kill `cat $PIDFILE` 48.73 + action 'Restarting %s: %s...' "$DESC" $NAME 48.74 + kill $(cat $PIDFILE) 48.75 sleep 2 48.76 $DAEMON $OPTIONS & 48.77 status 48.78 sleep 2 48.79 ;; 48.80 *) 48.81 - echo "" 48.82 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 48.83 - echo "" 48.84 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 48.85 + newline 48.86 exit 1 48.87 ;; 48.88 esac
49.1 --- a/motion/stuff/init.d/motion Wed May 25 23:07:05 2016 +0200 49.2 +++ b/motion/stuff/init.d/motion Thu May 26 20:16:45 2016 +0300 49.3 @@ -6,42 +6,46 @@ 49.4 . /etc/init.d/rc.functions 49.5 49.6 NAME=Motion 49.7 -DESC="Video detection" 49.8 +DESC="$(_ 'Video detection daemon')" 49.9 DAEMON=/usr/bin/motion 49.10 PIDFILE=/run/motion/motion.pid 49.11 49.12 case "$1" in 49.13 start) 49.14 if active_pidfile $PIDFILE motion ; then 49.15 - echo "$NAME already running." 49.16 + _ '%s is already running.' $NAME 49.17 exit 1 49.18 fi 49.19 - echo "Starting $DESC: $NAME... " 49.20 + action 'Starting %s: %s...' "$DESC" $NAME 49.21 mkdir -p $(dirname $PIDFILE) 49.22 - $DAEMON -p $PIDFILE ;; 49.23 + $DAEMON -p $PIDFILE 49.24 + status 49.25 + ;; 49.26 stop) 49.27 if ! active_pidfile $PIDFILE motion ; then 49.28 - echo "$NAME is not running." 49.29 + _ '%s is not running.' $NAME 49.30 exit 1 49.31 fi 49.32 - echo -n "Stopping $DESC: $NAME... " 49.33 + action 'Stopping %s: %s...' "$DESC" $NAME 49.34 kill $(cat $PIDFILE) 49.35 rm $PIDFILE 49.36 - status ;; 49.37 + status 49.38 + ;; 49.39 restart) 49.40 if ! active_pidfile $PIDFILE motion ; then 49.41 echo "$NAME is not running." 49.42 exit 1 49.43 fi 49.44 - echo "Restarting $DESC: $NAME... " 49.45 + _ 'Restarting %s: %s...' "$DESC" $NAME 49.46 kill $(cat $PIDFILE) 49.47 rm $PIDFILE 49.48 sleep 2 49.49 - $DAEMON -p $PIDFILE ;; 49.50 + $DAEMON -p $PIDFILE 49.51 + status 49.52 + ;; 49.53 *) 49.54 - echo "" 49.55 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 49.56 - echo "" 49.57 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 49.58 + newline 49.59 exit 1 ;; 49.60 esac 49.61
50.1 --- a/mpd/stuff/etc/init.d/mpd Wed May 25 23:07:05 2016 +0200 50.2 +++ b/mpd/stuff/etc/init.d/mpd Thu May 26 20:16:45 2016 +0300 50.3 @@ -8,48 +8,47 @@ 50.4 . /etc/init.d/rc.functions 50.5 50.6 NAME=mpd 50.7 -DESC="Music Player Daemon" 50.8 +DESC="$(_ 'Music Player Daemon')" 50.9 DAEMON=/usr/sbin/mpd 50.10 OPTION="/etc/mpd.conf" 50.11 PIDFILE="/var/run/mpd.pid" 50.12 50.13 case "$1" in 50.14 -start) 50.15 - if active_pidfile $PIDFILE mpd ; then 50.16 - echo "$NAME already running." 50.17 + start) 50.18 + if active_pidfile $PIDFILE mpd ; then 50.19 + _ '%s is already running.' $NAME 50.20 + exit 1 50.21 + fi 50.22 + action 'Starting %s: %s...' "$DESC" $NAME 50.23 + $DAEMON $OPTION 2>/dev/null 50.24 + status 50.25 + pidof $NAME > $PIDFILE 50.26 + ;; 50.27 + stop) 50.28 + if ! active_pidfile $PIDFILE mpd ; then 50.29 + _ '%s is not running.' $NAME 50.30 + exit 1 50.31 + fi 50.32 + action 'Stopping %s: %s...' "$DESC" $NAME 50.33 + kill $(pidof $NAME) 50.34 + status 50.35 + ;; 50.36 + restart) 50.37 + if ! active_pidfile $PIDFILE mpd ; then 50.38 + _ '%s is not running.' $NAME 50.39 + exit 1 50.40 + fi 50.41 + action 'Restarting %s: %s...' "$DESC" $NAME 50.42 + kill $(pidof $NAME) 50.43 + sleep 2 50.44 + $DAEMON $OPTION 2>/dev/null 50.45 + status 50.46 + ;; 50.47 + *) 50.48 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 50.49 + newline 50.50 exit 1 50.51 - fi 50.52 - echo -n "Starting $DESC: $NAME... " 50.53 - $DAEMON $OPTION 2> /dev/null 50.54 - status 50.55 - pidof $NAME > $PIDFILE 50.56 - ;; 50.57 -stop) 50.58 - if ! active_pidfile $PIDFILE mpd ; then 50.59 - echo "$NAME is not running." 50.60 - exit 1 50.61 - fi 50.62 - echo -n "Stopping $DESC: $NAME... " 50.63 - kill $(pidof $NAME) 50.64 - status 50.65 - ;; 50.66 -restart) 50.67 - if ! active_pidfile $PIDFILE mpd ; then 50.68 - echo "$NAME is not running." 50.69 - exit 1 50.70 - fi 50.71 - echo -n "Restarting $DESC: $NAME... " 50.72 - kill $(pidof $NAME) 50.73 - sleep 2 50.74 - $DAEMON $OPTION 2> /dev/null 50.75 - status 50.76 - ;; 50.77 -*) 50.78 - echo "" 50.79 - echo -e "\033[1mUsage:\033[0m /etc/init.d/$(basename $0) [start|stop|restart]" 50.80 - echo "" 50.81 - exit 1 50.82 - ;; 50.83 + ;; 50.84 esac 50.85 50.86 exit 0
51.1 --- a/mysql/stuff/etc/init.d/mysql Wed May 25 23:07:05 2016 +0200 51.2 +++ b/mysql/stuff/etc/init.d/mysql Thu May 26 20:16:45 2016 +0300 51.3 @@ -1,5 +1,5 @@ 51.4 #!/bin/sh 51.5 -# /etc/init.d/mysql : Start, stop and restart MySQL server on SliTaz, at 51.6 +# /etc/init.d/mysql : Start, stop and restart MySQL server on SliTaz, at 51.7 # boot time or with the command line. 51.8 # 51.9 # To start MySQL server at boot time, just put mysql in the $RUN_DAEMONS 51.10 @@ -9,7 +9,7 @@ 51.11 . /etc/daemons.conf 51.12 51.13 NAME=Mysql 51.14 -DESC="MySQL server" 51.15 +DESC="$(_ '%s server' MySQL)" 51.16 DAEMON=/usr/bin/mysqld_safe 51.17 OPTIONS=$MYSQL_OPTIONS 51.18 PIDFILE=/var/run/mysqld/mysql.pid 51.19 @@ -22,51 +22,51 @@ 51.20 case "$1" in 51.21 start) 51.22 if active_pidfile $PIDFILE mysqld ; then 51.23 - echo "$NAME already running." 51.24 + _ '%s is already running.' $NAME 51.25 exit 1 51.26 fi 51.27 if [ ! -d /var/lib/mysql/mysql ]; then 51.28 - echo "Initializing $DESC: " 51.29 - rm -rf /var/lib/mysql/* 2> /dev/null 51.30 + action 'Initializing %s...' "$DESC" 51.31 + rm -rf /var/lib/mysql/* 2>/dev/null 51.32 mysql_install_db --user=mysql --datadir=/var/lib/mysql 51.33 + status 51.34 fi 51.35 - echo -n "Starting $DESC: $NAME... " 51.36 - $DAEMON $OPTIONS > /dev/null & 51.37 + action 'Starting %s: %s...' "$DESC" $NAME 51.38 + $DAEMON $OPTIONS >/dev/null & 51.39 status 51.40 sleep 2 51.41 for i in /etc/mysql.d/* ; do 51.42 - [ -x $i ] || continue 51.43 - echo -n "Running $i..." 51.44 - $i 51.45 - status 51.46 + [ -x $i ] || continue 51.47 + action 'Running %s...' $i 51.48 + $i 51.49 + status 51.50 done 51.51 ;; 51.52 stop) 51.53 if ! active_pidfile $PIDFILE mysqld ; then 51.54 - echo "$NAME is not running." 51.55 + _ '%s is not running.' $NAME 51.56 exit 1 51.57 fi 51.58 - echo -n "Stopping $DESC: $NAME... " 51.59 - kill `cat $PIDFILE`> /dev/null 51.60 + action 'Stopping %s: %s...' "$DESC" $NAME 51.61 + kill $(cat $PIDFILE) >/dev/null 51.62 status 51.63 sleep 2 51.64 ;; 51.65 restart) 51.66 if ! active_pidfile $PIDFILE mysqld ; then 51.67 - echo "$NAME is not running." 51.68 + _ '%s is not running.' $NAME 51.69 exit 1 51.70 fi 51.71 - echo -n "Restarting $DESC: $NAME... " 51.72 - kill `cat $PIDFILE` 51.73 + action 'Restarting %s: %s...' "$DESC" $NAME 51.74 + kill $(cat $PIDFILE) 51.75 sleep 2 51.76 $DAEMON $OPTIONS & 51.77 status 51.78 sleep 2 51.79 ;; 51.80 *) 51.81 - echo "" 51.82 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 51.83 - echo "" 51.84 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 51.85 + newline 51.86 exit 1 51.87 ;; 51.88 esac
52.1 --- a/nagios-nrpe/stuff/nrpe Wed May 25 23:07:05 2016 +0200 52.2 +++ b/nagios-nrpe/stuff/nrpe Thu May 26 20:16:45 2016 +0300 52.3 @@ -1,5 +1,5 @@ 52.4 #!/bin/sh 52.5 -# /etc/init.d/nrpe : Start, stop and restart NRPE Server on SliTaz, at 52.6 +# /etc/init.d/nrpe : Start, stop and restart NRPE Server on SliTaz, at 52.7 # boot time or with the command line. 52.8 # 52.9 # To start SSH server at boot time, just put nagios in the $RUN_DAEMONS 52.10 @@ -9,50 +9,49 @@ 52.11 . /etc/daemons.conf 52.12 52.13 NAME=NRPE 52.14 -DESC="NRPE daemon" 52.15 +DESC="$(_ '%s daemon' NRPE)" 52.16 DAEMON=/usr/bin/nrpe 52.17 CONFIG_FILE="/etc/nagios/nrpe.cfg" 52.18 OPTIONS="-n -c $CONFIG_FILE -d" 52.19 PIDFILE=/var/run/nagios/nrpe.pid 52.20 52.21 if [ ! -d /var/run/nagios ]; then 52.22 - mkdir -p /var/run/nagios 52.23 - chown nagios.nagios /var/run/nagios 52.24 + mkdir -p /var/run/nagios 52.25 + chown nagios.nagios /var/run/nagios 52.26 fi 52.27 case "$1" in 52.28 start) 52.29 if active_pidfile $PIDFILE nrpe ; then 52.30 - echo "$NAME already running." 52.31 + _ '%s is already running.' $NAME 52.32 exit 1 52.33 fi 52.34 - echo -n "Starting $DESC: $NAME... " 52.35 - $DAEMON $OPTIONS 52.36 + action 'Starting %s: %s...' "$DESC" $NAME 52.37 + $DAEMON $OPTIONS 52.38 status 52.39 ;; 52.40 stop) 52.41 if ! active_pidfile $PIDFILE nrpe ; then 52.42 - echo "$NAME is not running." 52.43 + _ '%s is not running.' $NAME 52.44 exit 1 52.45 fi 52.46 - echo -n "Stopping $DESC: $NAME... " 52.47 - kill `cat $PIDFILE` 52.48 + action 'Stopping %s: %s...' "$DESC" $NAME 52.49 + kill $(cat $PIDFILE) 52.50 status 52.51 ;; 52.52 restart|reload) 52.53 if ! active_pidfile $PIDFILE nrpe ; then 52.54 - echo "$NAME is not running." 52.55 + _ '%s is not running.' $NAME 52.56 exit 1 52.57 fi 52.58 - echo -n "Restarting $DESC: $NAME... " 52.59 - kill `cat $PIDFILE` 52.60 + action 'Restarting %s: %s...' "$DESC" $NAME 52.61 + kill $(cat $PIDFILE) 52.62 sleep 2 52.63 $DAEMON $OPTIONS 52.64 status 52.65 ;; 52.66 *) 52.67 - echo "" 52.68 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart|reload]" 52.69 - echo "" 52.70 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload]" 52.71 + newline 52.72 exit 1 52.73 ;; 52.74 esac
53.1 --- a/nagios/stuff/nagios Wed May 25 23:07:05 2016 +0200 53.2 +++ b/nagios/stuff/nagios Thu May 26 20:16:45 2016 +0300 53.3 @@ -1,5 +1,5 @@ 53.4 #!/bin/sh 53.5 -# /etc/init.d/nagios : Start, stop and restart Nagios server on SliTaz, at 53.6 +# /etc/init.d/nagios : Start, stop and restart Nagios server on SliTaz, at 53.7 # boot time or with the command line. 53.8 # 53.9 # To start Nagios at boot time, just put nagios in the $RUN_DAEMONS 53.10 @@ -9,7 +9,7 @@ 53.11 . /etc/daemons.conf 53.12 53.13 NAME=Nagios 53.14 -DESC="Network Monitoring Server" 53.15 +DESC="$(_ 'Network Monitoring Server')" 53.16 DAEMON=/usr/bin/nagios 53.17 CONFIG_FILE="/etc/nagios/nagios.cfg" 53.18 OPTIONS="-d $CONFIG_FILE" 53.19 @@ -17,50 +17,50 @@ 53.20 53.21 configtest() 53.22 { 53.23 - $DAEMON -v $CONFIG_FILE 53.24 + $DAEMON -v $CONFIG_FILE 53.25 } 53.26 53.27 if [ ! -d /var/run/nagios ]; then 53.28 - mkdir -p /var/run/nagios 53.29 - chown nagios.nagios /var/run/nagios 53.30 + mkdir -p /var/run/nagios 53.31 + chown nagios.nagios /var/run/nagios 53.32 fi 53.33 case "$1" in 53.34 start) 53.35 if active_pidfile $PIDFILE nagios ; then 53.36 - echo "$NAME already running." 53.37 + _ '%s is already running.' $NAME 53.38 exit 1 53.39 fi 53.40 - echo -n "Starting $DESC: $NAME... " 53.41 - $DAEMON $OPTIONS 53.42 - #/usr/bin/nagios -d /etc/nagios/nagios.cfg 53.43 + action 'Starting %s: %s...' "$DESC" $NAME 53.44 + $DAEMON $OPTIONS 53.45 + #/usr/bin/nagios -d /etc/nagios/nagios.cfg 53.46 status 53.47 ;; 53.48 stop) 53.49 if ! active_pidfile $PIDFILE nagios ; then 53.50 - echo "$NAME is not running." 53.51 + _ '%s is not running.' $NAME 53.52 exit 1 53.53 fi 53.54 - echo -n "Stopping $DESC: $NAME... " 53.55 - kill `cat $PIDFILE` 53.56 + status 'Stopping %s: %s...' "$DESC" $NAME 53.57 + kill $(cat $PIDFILE) 53.58 status 53.59 ;; 53.60 restart|reload) 53.61 if ! active_pidfile $PIDFILE nagios ; then 53.62 - echo "$NAME is not running." 53.63 + _ '%s is not running.' $NAME 53.64 exit 1 53.65 fi 53.66 - echo -n "Restarting $DESC: $NAME... " 53.67 - kill `cat $PIDFILE` 53.68 + action 'Restarting %s: %s...' "$DESC" $NAME 53.69 + kill $(cat $PIDFILE) 53.70 sleep 2 53.71 $DAEMON $OPTIONS 53.72 status 53.73 ;; 53.74 test) 53.75 - configtest ;; 53.76 + configtest 53.77 + ;; 53.78 *) 53.79 - echo "" 53.80 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart|reload]" 53.81 - echo "" 53.82 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload|test]" 53.83 + newline 53.84 exit 1 53.85 ;; 53.86 esac
54.1 --- a/netatalk-pam/stuff/etc/init.d/netatalk Wed May 25 23:07:05 2016 +0200 54.2 +++ b/netatalk-pam/stuff/etc/init.d/netatalk Thu May 26 20:16:45 2016 +0300 54.3 @@ -1,5 +1,5 @@ 54.4 #!/bin/sh 54.5 -# Start, stop and restart the netatalk deamons on SliTaz, at boot time or 54.6 +# Start, stop and restart the netatalk deamons on SliTaz, at boot time or 54.7 # with the command line. 54.8 # 54.9 # To start netatalk at boot time, just put the right name in the $RUN_DAEMONS 54.10 @@ -8,7 +8,7 @@ 54.11 . /etc/init.d/rc.functions 54.12 54.13 NAME=atalkd 54.14 -DESC="netatalk deamons" 54.15 +DESC="$(_ 'Netatalk daemons')" 54.16 PIDFILE=/var/run/$NAME.pid 54.17 AFPD_UAMLIST="-U uams_dhx.so,uams_clrtxt.so,uams_randnum.so" 54.18 AFPD_GUEST=nobody 54.19 @@ -22,7 +22,7 @@ 54.20 # Start Netatalk servers. 54.21 atalk_startup() 54.22 { 54.23 - if [ "$ATALKD_RUN" = "yes" ]; then 54.24 + if [ "$ATALKD_RUN" == "yes" ]; then 54.25 modprobe appletalk 54.26 atalkd 54.27 pidof atalkd > $PIDFILE 54.28 @@ -31,51 +31,50 @@ 54.29 nbprgstr -p 4 "$ATALK_NAME:Workstation$ATALK_ZONE" 54.30 nbprgstr -p 4 "$ATALK_NAME:netatalk$ATALK_ZONE" 54.31 54.32 - [ "$PAPD_RUN" = "yes" ] && papd 54.33 - [ "$TIMELORD_RUN" = "yes" ] && timelord 54.34 + [ "$PAPD_RUN" == "yes" ] && papd 54.35 + [ "$TIMELORD_RUN" == "yes" ] && timelord 54.36 fi 54.37 54.38 - [ "$AFPD_RUN" = "yes" ] && afpd $AFPD_UAMLIST -g $AFPD_GUEST \ 54.39 + [ "$AFPD_RUN" == "yes" ] && afpd $AFPD_UAMLIST -g $AFPD_GUEST \ 54.40 -c $AFPD_MAX_CLIENTS -n "$ATALK_NAME$ATALK_ZONE" 54.41 } 54.42 54.43 case "$1" in 54.44 -start) 54.45 - if active_pidfile $PIDFILE $NAME ; then 54.46 - echo "$NAME is already running." 54.47 + start) 54.48 + if active_pidfile $PIDFILE $NAME ; then 54.49 + _ '%s is already running.' $NAME 54.50 + exit 1 54.51 + fi 54.52 + action 'Starting %s: %s...' "$DESC" $NAME 54.53 + if [ "$ATALK_BGROUND" == "yes" ]; then 54.54 + atalk_startup >/dev/null & 54.55 + else 54.56 + atalk_startup 54.57 + fi 54.58 + status 54.59 + ;; 54.60 + stop) 54.61 + if ! active_pidfile $PIDFILE $NAME ; then 54.62 + _ '%s is not running.' $NAME 54.63 + exit 1 54.64 + fi 54.65 + action 'Stopping %s: %s...' "$DESC" $NAME 54.66 + killall afpd 54.67 + killall papd 54.68 + killall timelord 54.69 + killall atalkd 54.70 + status 54.71 + ;; 54.72 + restart) 54.73 + $0 start 54.74 + sleep 2 54.75 + $0 stop 54.76 + ;; 54.77 + *) 54.78 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 54.79 + newline 54.80 exit 1 54.81 - fi 54.82 - echo -n "Starting $DESC: $NAME... " 54.83 - if [ "$ATALK_BGROUND" == "yes" ]; then 54.84 - atalk_startup >/dev/null & 54.85 - else 54.86 - atalk_startup 54.87 - fi 54.88 - status 54.89 - ;; 54.90 -stop) 54.91 - if ! active_pidfile $PIDFILE $NAME ; then 54.92 - echo "$NAME is not running." 54.93 - exit 1 54.94 - fi 54.95 - echo -n "Stopping $DESC: $NAME... " 54.96 - killall afpd 54.97 - killall papd 54.98 - killall timelord 54.99 - killall atalkd 54.100 - status 54.101 - ;; 54.102 -restart) 54.103 - $0 start 54.104 - sleep 2 54.105 - $0 stop 54.106 - ;; 54.107 -*) 54.108 - echo "" 54.109 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 54.110 - echo "" 54.111 - exit 1 54.112 - ;; 54.113 + ;; 54.114 esac 54.115 54.116 exit 0
55.1 --- a/netatalk/stuff/etc/init.d/netatalk Wed May 25 23:07:05 2016 +0200 55.2 +++ b/netatalk/stuff/etc/init.d/netatalk Thu May 26 20:16:45 2016 +0300 55.3 @@ -1,5 +1,5 @@ 55.4 #!/bin/sh 55.5 -# Start, stop and restart the netatalk deamons on SliTaz, at boot time or 55.6 +# Start, stop and restart the netatalk deamons on SliTaz, at boot time or 55.7 # with the command line. 55.8 # 55.9 # To start netatalk at boot time, just put the right name in the $RUN_DAEMONS 55.10 @@ -8,7 +8,7 @@ 55.11 . /etc/init.d/rc.functions 55.12 55.13 NAME=atalkd 55.14 -DESC="netatalk deamons" 55.15 +DESC="$(_ 'Netatalk daemons')" 55.16 PIDFILE=/var/run/$NAME.pid 55.17 AFPD_UAMLIST="-U uams_dhx.so,uams_clrtxt.so,uams_randnum.so" 55.18 AFPD_GUEST=nobody 55.19 @@ -22,7 +22,7 @@ 55.20 # Start Netatalk servers. 55.21 atalk_startup() 55.22 { 55.23 - if [ "$ATALKD_RUN" = "yes" ]; then 55.24 + if [ "$ATALKD_RUN" == "yes" ]; then 55.25 modprobe appletalk 55.26 atalkd 55.27 pidof atalkd > $PIDFILE 55.28 @@ -31,8 +31,8 @@ 55.29 nbprgstr -p 4 "$ATALK_NAME:Workstation$ATALK_ZONE" 55.30 nbprgstr -p 4 "$ATALK_NAME:netatalk$ATALK_ZONE" 55.31 55.32 - [ "$PAPD_RUN" = "yes" ] && papd 55.33 - [ "$TIMELORD_RUN" = "yes" ] && timelord 55.34 + [ "$PAPD_RUN" == "yes" ] && papd 55.35 + [ "$TIMELORD_RUN" == "yes" ] && timelord 55.36 fi 55.37 55.38 [ "$AFPD_RUN" = "yes" ] && afpd $AFPD_UAMLIST -g $AFPD_GUEST \ 55.39 @@ -40,42 +40,41 @@ 55.40 } 55.41 55.42 case "$1" in 55.43 -start) 55.44 - if active_pidfile $PIDFILE $NAME ; then 55.45 - echo "$NAME is already running." 55.46 + start) 55.47 + if active_pidfile $PIDFILE $NAME ; then 55.48 + _ '%s is already running.' $NAME 55.49 + exit 1 55.50 + fi 55.51 + action 'Starting %s: %s...' "$DESC" $NAME 55.52 + if [ "$ATALK_BGROUND" == "yes" ]; then 55.53 + atalk_startup >/dev/null & 55.54 + else 55.55 + atalk_startup 55.56 + fi 55.57 + status 55.58 + ;; 55.59 + stop) 55.60 + if ! active_pidfile $PIDFILE $NAME ; then 55.61 + _ '%s is not running.' $NAME 55.62 + exit 1 55.63 + fi 55.64 + action 'Stopping %s: %s...' "$DESC" $NAME 55.65 + killall afpd 55.66 + killall papd 55.67 + killall timelord 55.68 + killall atalkd 55.69 + status 55.70 + ;; 55.71 + restart) 55.72 + $0 start 55.73 + sleep 2 55.74 + $0 stop 55.75 + ;; 55.76 + *) 55.77 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 55.78 + newline 55.79 exit 1 55.80 - fi 55.81 - echo -n "Starting $DESC: $NAME... " 55.82 - if [ "$ATALK_BGROUND" == "yes" ]; then 55.83 - atalk_startup >/dev/null & 55.84 - else 55.85 - atalk_startup 55.86 - fi 55.87 - status 55.88 - ;; 55.89 -stop) 55.90 - if ! active_pidfile $PIDFILE $NAME ; then 55.91 - echo "$NAME is not running." 55.92 - exit 1 55.93 - fi 55.94 - echo -n "Stopping $DESC: $NAME... " 55.95 - killall afpd 55.96 - killall papd 55.97 - killall timelord 55.98 - killall atalkd 55.99 - status 55.100 - ;; 55.101 -restart) 55.102 - $0 start 55.103 - sleep 2 55.104 - $0 stop 55.105 - ;; 55.106 -*) 55.107 - echo "" 55.108 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 55.109 - echo "" 55.110 - exit 1 55.111 - ;; 55.112 + ;; 55.113 esac 55.114 55.115 exit 0
56.1 --- a/nfs-utils/stuff/etc/init.d/nfsd Wed May 25 23:07:05 2016 +0200 56.2 +++ b/nfs-utils/stuff/etc/init.d/nfsd Thu May 26 20:16:45 2016 +0300 56.3 @@ -8,7 +8,7 @@ 56.4 . /etc/init.d/rc.functions 56.5 56.6 NAME=NFSd 56.7 -DESC="NFS Daemon" 56.8 +DESC="$(_ '%s daemon' NFS)" 56.9 DAEMON=/usr/sbin/rpc.nfsd 56.10 PID_FILE=/var/run/nfsd.pid 56.11 OPTION="8" 56.12 @@ -16,24 +16,24 @@ 56.13 56.14 stop_warning() 56.15 { 56.16 -echo "Warning: filesystems are unexported but nfsd and lockd processes are still alive..." 56.17 + echo "Warning: filesystems are unexported but nfsd and lockd processes are still alive..." 56.18 } 56.19 56.20 case "$1" in 56.21 start) 56.22 if active_pidfile $PID_FILE nfsd ; then 56.23 - echo "$NAME already running." 56.24 + _ '%s is already running.' $NAME 56.25 exit 1 56.26 fi 56.27 - echo -n "Starting $DESC: $NAME... " 56.28 + action 'Starting %s: %s...' "$DESC" $NAME 56.29 portmap="$(pidof portmap)" 56.30 if [ -n "$portmap" ]; then 56.31 - kill $portmap 56.32 - sleep 2 56.33 + kill $portmap 56.34 + sleep 2 56.35 fi 56.36 [ -n "$(pidof rpcbind)" ] || rpcbind 56.37 modprobe nfsd 56.38 - mount -t nfsd nfsd /proc/fs/nfsd 2> /dev/null 56.39 + mount -t nfsd nfsd /proc/fs/nfsd 2>/dev/null 56.40 /usr/sbin/exportfs -r 56.41 $DAEMON $OPTION 56.42 pidof nfsd | awk '{print $1}' > $PID_FILE 56.43 @@ -42,10 +42,10 @@ 56.44 ;; 56.45 stop) 56.46 if ! active_pidfile $PID_FILE nfsd ; then 56.47 - echo "$NAME is not running." 56.48 + _ '%s is not running.' $NAME 56.49 exit 1 56.50 fi 56.51 - echo -n "Stopping $DESC: $NAME... " 56.52 + action 'Stopping %s: %s...' "$DESC" $NAME 56.53 killall rpc.mountd 56.54 killall nfsd 56.55 killall lockd 56.56 @@ -57,10 +57,10 @@ 56.57 ;; 56.58 restart) 56.59 if ! active_pidfile $PID_FILE nfsd ; then 56.60 - echo "$NAME is not running." 56.61 + _ '%s is not running.' $NAME 56.62 exit 1 56.63 fi 56.64 - echo -n "Restarting $DESC: $NAME... " 56.65 + action 'Restarting %s: %s...' "$DESC" $NAME 56.66 killall rpc.mountd 56.67 killall nfsd 56.68 killall lockd 56.69 @@ -74,9 +74,8 @@ 56.70 status 56.71 ;; 56.72 *) 56.73 - echo "" 56.74 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 56.75 - echo "" 56.76 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 56.77 + newline 56.78 exit 1 56.79 ;; 56.80 esac
57.1 --- a/nginx-extras/stuff/etc/init.d/nginx Wed May 25 23:07:05 2016 +0200 57.2 +++ b/nginx-extras/stuff/etc/init.d/nginx Thu May 26 20:16:45 2016 +0300 57.3 @@ -1,5 +1,5 @@ 57.4 #!/bin/sh 57.5 -# /etc/init.d/nginx: Start, stop and restart web server on SliTaz, 57.6 +# /etc/init.d/nginx: Start, stop and restart web server on SliTaz, 57.7 # at boot time or with the command line. Daemons options are configured 57.8 # with /etc/daemons.conf 57.9 # 57.10 @@ -7,7 +7,7 @@ 57.11 . /etc/daemons.conf 57.12 57.13 NAME=Nginx 57.14 -DESC="web server" 57.15 +DESC="$(_ 'web server')" 57.16 DAEMON=/usr/sbin/nginx 57.17 OPTIONS=$NGINX_OPTIONS 57.18 PIDFILE=/var/run/nginx.pid 57.19 @@ -15,39 +15,38 @@ 57.20 case "$1" in 57.21 start) 57.22 if active_pidfile $PIDFILE nginx ; then 57.23 - echo "$NAME already running." 57.24 + _ '%s is already running.' $NAME 57.25 exit 1 57.26 fi 57.27 - echo -n "Starting $DESC: $NAME... " 57.28 - $DAEMON $OPTIONS 57.29 + action 'Starting %s: %s...' "$DESC" $NAME 57.30 + $DAEMON $OPTIONS 57.31 status 57.32 ;; 57.33 stop) 57.34 if ! active_pidfile $PIDFILE nginx ; then 57.35 - echo "$NAME is not running." 57.36 + _ '%s is not running.' $NAME 57.37 exit 1 57.38 fi 57.39 - echo -n "Stopping $DESC: $NAME... " 57.40 - kill `cat $PIDFILE` 57.41 + action 'Stopping %s: %s...' "$DESC" $NAME 57.42 + kill $(cat $PIDFILE) 57.43 rm $PIDFILE 57.44 status 57.45 ;; 57.46 restart) 57.47 if ! active_pidfile $PIDFILE nginx ; then 57.48 - echo "$NAME is not running." 57.49 + _ '%s is not running.' $NAME 57.50 exit 1 57.51 fi 57.52 - echo -n "Restarting $DESC: $NAME... " 57.53 - kill `cat $PIDFILE` 57.54 + action 'Restarting %s: %s...' "$DESC" $NAME 57.55 + kill $(cat $PIDFILE) 57.56 rm $PIDFILE 57.57 sleep 2 57.58 $DAEMON $OPTIONS 57.59 status 57.60 ;; 57.61 *) 57.62 - echo "" 57.63 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 57.64 - echo "" 57.65 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 57.66 + newline 57.67 exit 1 57.68 ;; 57.69 esac
58.1 --- a/nginx/stuff/etc/init.d/nginx Wed May 25 23:07:05 2016 +0200 58.2 +++ b/nginx/stuff/etc/init.d/nginx Thu May 26 20:16:45 2016 +0300 58.3 @@ -1,5 +1,5 @@ 58.4 #!/bin/sh 58.5 -# /etc/init.d/nginx: Start, stop and restart web server on SliTaz, 58.6 +# /etc/init.d/nginx: Start, stop and restart web server on SliTaz, 58.7 # at boot time or with the command line. Daemons options are configured 58.8 # with /etc/daemons.conf 58.9 # 58.10 @@ -7,7 +7,7 @@ 58.11 . /etc/daemons.conf 58.12 58.13 NAME=Nginx 58.14 -DESC="web server" 58.15 +DESC="$(_ 'web server')" 58.16 DAEMON=/usr/sbin/nginx 58.17 OPTIONS=$NGINX_OPTIONS 58.18 PIDFILE=/var/run/nginx.pid 58.19 @@ -15,39 +15,38 @@ 58.20 case "$1" in 58.21 start) 58.22 if active_pidfile $PIDFILE nginx ; then 58.23 - echo "$NAME already running." 58.24 + _ '%s is already running.' $NAME 58.25 exit 1 58.26 fi 58.27 - echo -n "Starting $DESC: $NAME... " 58.28 - $DAEMON $OPTIONS 58.29 + action 'Starting %s: %s...' "$DESC" $NAME 58.30 + $DAEMON $OPTIONS 58.31 status 58.32 ;; 58.33 stop) 58.34 if ! active_pidfile $PIDFILE nginx ; then 58.35 - echo "$NAME is not running." 58.36 + _ '%s is not running.' $NAME 58.37 exit 1 58.38 fi 58.39 - echo -n "Stopping $DESC: $NAME... " 58.40 - kill `cat $PIDFILE` 58.41 + action 'Stopping %s: %s...' "$DESC" $NAME 58.42 + kill $(cat $PIDFILE) 58.43 rm $PIDFILE 58.44 status 58.45 ;; 58.46 restart) 58.47 if ! active_pidfile $PIDFILE nginx ; then 58.48 - echo "$NAME is not running." 58.49 + _ '%s is not running.' $NAME 58.50 exit 1 58.51 fi 58.52 - echo -n "Restarting $DESC: $NAME... " 58.53 - kill `cat $PIDFILE` 58.54 + action 'Restarting %s: %s...' "$DESC" $NAME 58.55 + kill $(cat $PIDFILE) 58.56 rm $PIDFILE 58.57 sleep 2 58.58 $DAEMON $OPTIONS 58.59 status 58.60 ;; 58.61 *) 58.62 - echo "" 58.63 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 58.64 - echo "" 58.65 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 58.66 + newline 58.67 exit 1 58.68 ;; 58.69 esac
59.1 --- a/nscd/stuff/nscd Wed May 25 23:07:05 2016 +0200 59.2 +++ b/nscd/stuff/nscd Thu May 26 20:16:45 2016 +0300 59.3 @@ -9,7 +9,7 @@ 59.4 . /etc/daemons.conf 59.5 59.6 NAME=nscd 59.7 -DESC="Name Switch Cache Daemon" 59.8 +DESC="$(_ 'name-server caching daemon')" 59.9 DAEMON=/usr/sbin/nscd 59.10 OPTIONS=$NSCD_OPTIONS 59.11 PIDFILE=/var/run/nscd/nscd.pid 59.12 @@ -20,41 +20,39 @@ 59.13 case "$1" in 59.14 start) 59.15 if active_pidfile $PIDFILE nscd ; then 59.16 - echo "$NAME already running." 59.17 + _ '%s is already running.' $NAME 59.18 exit 1 59.19 fi 59.20 - echo -n "Starting $DESC: $NAME... " 59.21 + action 'Starting %s: %s...' "$DESC" $NAME 59.22 $DAEMON $OPTIONS 59.23 status 59.24 sleep 2 59.25 ;; 59.26 stop) 59.27 if ! active_pidfile $PIDFILE nscd ; then 59.28 - echo "$NAME is not running." 59.29 + _ '%s is not running.' $NAME 59.30 exit 1 59.31 fi 59.32 - echo -n "Stopping $DESC: $NAME... " 59.33 - kill `cat $PIDFILE` 59.34 + action 'Stopping %s: %s...' "$DESC" $NAME 59.35 + kill $(cat $PIDFILE) 59.36 status 59.37 sleep 2 59.38 ;; 59.39 restart) 59.40 if ! active_pidfile $PIDFILE nscd ; then 59.41 - echo "$NAME is not running." 59.42 + _ '%s is not running.' $NAME 59.43 exit 1 59.44 fi 59.45 - echo -n "Restarting $DESC: $NAME... " 59.46 - kill `cat $PIDFILE` 59.47 + action 'Restarting %s: %s...' "$DESC" $NAME 59.48 + kill $(cat $PIDFILE) 59.49 sleep 2 59.50 $DAEMON $OPTIONS 59.51 status 59.52 sleep 2 59.53 ;; 59.54 *) 59.55 - echo "" 59.56 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart 59.57 -]" 59.58 - echo "" 59.59 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 59.60 + newline 59.61 exit 1 59.62 ;; 59.63 esac
60.1 --- a/ntop/stuff/etc/init.d/ntop Wed May 25 23:07:05 2016 +0200 60.2 +++ b/ntop/stuff/etc/init.d/ntop Thu May 26 20:16:45 2016 +0300 60.3 @@ -1,5 +1,5 @@ 60.4 #!/bin/sh 60.5 -# /etc/init.d/ntop : Start, stop and restart ntop daemon on SliTaz, at 60.6 +# /etc/init.d/ntop : Start, stop and restart ntop daemon on SliTaz, at 60.7 # boot time or with the command line. 60.8 # 60.9 # To start SSH server at boot time, just put ntop in the $RUN_DAEMONS 60.10 @@ -9,7 +9,7 @@ 60.11 60.12 60.13 NAME=ntop 60.14 -DESC="ntop server" 60.15 +DESC="$(_ '%s server' ntop)" 60.16 DAEMON=/usr/bin/ntop 60.17 60.18 HTTP_PORT="3000" 60.19 @@ -23,41 +23,40 @@ 60.20 case "$1" in 60.21 start) 60.22 if active_pidfile $PIDFILE $NAME ; then 60.23 - echo "$NAME already running." 60.24 + _ '%s is already running.' $NAME 60.25 exit 1 60.26 fi 60.27 # We need to set ntop admin password. 60.28 if [ ! -f /var/ntop/ntop_pw.db ] ; then 60.29 - ntop -A || exit 60.30 + ntop -A || exit 60.31 fi 60.32 - echo -n "Starting $DESC: $NAME... " 60.33 + action 'Starting %s: %s...' "$DESC" $NAME 60.34 $DAEMON $OPTIONS >> $LOGFILE 60.35 status 60.36 ;; 60.37 stop) 60.38 if ! active_pidfile $PIDFILE $NAME ; then 60.39 - echo "$NAME is not running." 60.40 + _ '%s is not running.' $NAME 60.41 exit 1 60.42 fi 60.43 - echo -n "Stopping $DESC: $NAME... " 60.44 - kill `cat $PIDFILE` && rm -f $PIDFILE 60.45 + action 'Stopping %s: %s...' "$DESC" $NAME 60.46 + kill $(cat $PIDFILE) && rm -f $PIDFILE 60.47 status 60.48 ;; 60.49 restart) 60.50 if ! active_pidfile $PIDFILE $NAME ; then 60.51 - echo "$NAME is not running." 60.52 + _ '%s is not running.' $NAME 60.53 exit 1 60.54 fi 60.55 - echo -n "Restarting $DESC: $NAME... " 60.56 - kill `cat $PIDFILE` && rm -f $PIDFILE 60.57 + action 'Restarting %s: %s...' "$DESC" $NAME 60.58 + kill $(cat $PIDFILE) && rm -f $PIDFILE 60.59 sleep 2 60.60 $DAEMON $OPTIONS 60.61 status 60.62 ;; 60.63 *) 60.64 - echo "" 60.65 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 60.66 - echo "" 60.67 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 60.68 + newline 60.69 exit 1 60.70 ;; 60.71 esac
61.1 --- a/ntp/stuff/ntp Wed May 25 23:07:05 2016 +0200 61.2 +++ b/ntp/stuff/ntp Thu May 26 20:16:45 2016 +0300 61.3 @@ -1,5 +1,5 @@ 61.4 #!/bin/sh 61.5 -# /etc/init.d/ntp : Start, stop and restart ntp server on SliTaz, at 61.6 +# /etc/init.d/ntp : Start, stop and restart ntp server on SliTaz, at 61.7 # boot time or with the command line. 61.8 # 61.9 # To start ntp server at boot time, just put ntp in the $RUN_DAEMONS 61.10 @@ -9,49 +9,47 @@ 61.11 . /etc/daemons.conf 61.12 61.13 NAME=ntp 61.14 -DESC="ntp server" 61.15 +DESC="$(_ '%s server' NTP)" 61.16 DAEMON=/usr/bin/ntpd 61.17 OPTIONS=$NTP_OPTIONS 61.18 PIDFILE=/var/run/ntpd.pid 61.19 [ -n "$OPTIONS" ] || OPTIONS="-p $PIDFILE -c /etc/ntp.conf" 61.20 - 61.21 61.22 case "$1" in 61.23 start) 61.24 if active_pidfile $PIDFILE ntpd ; then 61.25 - echo "$NAME already running." 61.26 + _ '%s is already running.' $NAME 61.27 exit 1 61.28 fi 61.29 - echo -n "Starting $DESC: $NAME... " 61.30 + action 'Starting %s: %s...' "$DESC" $NAME 61.31 $DAEMON $OPTIONS 61.32 status 61.33 pgrep $DAEMON > $PIDFILE # it seems that -p doesn't work ? 61.34 ;; 61.35 stop) 61.36 if ! active_pidfile $PIDFILE ntpd ; then 61.37 - echo "$NAME is not running." 61.38 + _ '%s is not running.' $NAME 61.39 exit 1 61.40 fi 61.41 - echo -n "Stopping $DESC: $NAME... " 61.42 - kill `cat $PIDFILE` 61.43 + action 'Stopping %s: %s...' "$DESC" $NAME 61.44 + kill $(cat $PIDFILE) 61.45 rm $PIDFILE 61.46 status 61.47 ;; 61.48 restart) 61.49 if ! active_pidfile $PIDFILE ntpd ; then 61.50 - echo "$NAME is not running." 61.51 + _ '%s is not running.' $NAME 61.52 exit 1 61.53 fi 61.54 - echo -n "Restarting $DESC: $NAME... " 61.55 - kill `cat $PIDFILE` 61.56 + action 'Restarting %s: %s...' "$DESC" $NAME 61.57 + kill $(cat $PIDFILE) 61.58 $DAEMON $OPTIONS 61.59 status 61.60 pgrep $DAEMON > $PIDFILE # it seems that -p doesn't work ? 61.61 ;; 61.62 *) 61.63 - echo "" 61.64 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 61.65 - echo "" 61.66 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 61.67 + newline 61.68 exit 1 61.69 ;; 61.70 esac
62.1 --- a/ofono/stuff/etc/init.d/ofono Wed May 25 23:07:05 2016 +0200 62.2 +++ b/ofono/stuff/etc/init.d/ofono Thu May 26 20:16:45 2016 +0300 62.3 @@ -10,7 +10,7 @@ 62.4 . /etc/daemons.conf 62.5 62.6 NAME=Ofono 62.7 -DESC="Mobile telephony Manager" 62.8 +DESC="$(_ 'Mobile telephony Manager')" 62.9 DAEMON=/usr/sbin/ofonod 62.10 OPTIONS=$OFONO_OPTIONS 62.11 PIDFILE=/var/run/ofono.pid 62.12 @@ -18,30 +18,30 @@ 62.13 case "$1" in 62.14 start) 62.15 if active_pidfile $PIDFILE ofonod ; then 62.16 - echo "$NAME already running." 62.17 + _ '%s is already running.' $NAME 62.18 exit 1 62.19 fi 62.20 - echo -n "Starting $DESC: $NAME... " 62.21 + action 'Starting %s: %s...' "$DESC" $NAME 62.22 $DAEMON $OPTIONS 62.23 status 62.24 pidof ofonod > $PIDFILE 62.25 ;; 62.26 stop) 62.27 if ! active_pidfile $PIDFILE ofonod ; then 62.28 - echo "$NAME is not running." 62.29 + _ '%s is not running.' $NAME 62.30 exit 1 62.31 fi 62.32 - echo -n "Stopping $DESC: $NAME... " 62.33 + action 'Stopping %s: %s...' "$DESC" $NAME 62.34 rm -rf $PIDFILE 62.35 kill $(pidof ofonod) 62.36 status 62.37 ;; 62.38 restart) 62.39 if ! active_pidfile $PIDFILE ofonod ; then 62.40 - echo "$NAME is not running." 62.41 + _ '%s is not running.' $NAME 62.42 exit 1 62.43 fi 62.44 - echo -n "Restarting $DESC: $NAME... " 62.45 + action 'Restarting %s: %s...' "$DESC" $NAME 62.46 rm -rf $PIDFILE 62.47 kill $(pidof ofonod) && 62.48 sleep 2 && 62.49 @@ -49,9 +49,8 @@ 62.50 status 62.51 ;; 62.52 *) 62.53 - printf "\n\033[1mUsage:\033[0m /etc/init.d/%b [start|stop|restart]\n" \ 62.54 - "$(basename $0)" 62.55 - exit 1 62.56 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 62.57 + newline 62.58 ;; 62.59 esac 62.60
63.1 --- a/open-vm-tools/stuff/vmtoolsd Wed May 25 23:07:05 2016 +0200 63.2 +++ b/open-vm-tools/stuff/vmtoolsd Thu May 26 20:16:45 2016 +0300 63.3 @@ -1,5 +1,5 @@ 63.4 #!/bin/sh 63.5 -# /etc/init.d/vmtoolsd : Start, stop and restart Open VM Tools daemon on SliTaz, at 63.6 +# /etc/init.d/vmtoolsd : Start, stop and restart Open VM Tools daemon on SliTaz, at 63.7 # boot time or with the command line. 63.8 # 63.9 # To start VMTools daemon at boot time, just put vmtoolsd in the $RUN_DAEMONS 63.10 @@ -9,7 +9,7 @@ 63.11 . /etc/daemons.conf 63.12 63.13 NAME=VMTools 63.14 -DESC="VMTools" 63.15 +DESC="$(_ '%s daemon' VMTools)" 63.16 DAEMON=/usr/bin/vmtoolsd 63.17 PIDFILE=/var/run/vmtoolsd.pid 63.18 OPTIONS="-b $PIDFILE" 63.19 @@ -17,10 +17,10 @@ 63.20 case "$1" in 63.21 start) 63.22 if active_pidfile $PIDFILE vmtoolsd ; then 63.23 - echo "$NAME already running." 63.24 + _ '%s is already running.' $NAME 63.25 exit 1 63.26 fi 63.27 - echo -n "Starting $DESC: $NAME... " 63.28 + action 'Starting %s: %s...' "$DESC" $NAME 63.29 modprobe vmblock 63.30 modprobe vmhgfs 63.31 modprobe vmci 63.32 @@ -31,28 +31,27 @@ 63.33 ;; 63.34 stop) 63.35 if ! active_pidfile $PIDFILE vmtoolsd ; then 63.36 - echo "$NAME is not running." 63.37 + _ '%s is not running.' $NAME 63.38 exit 1 63.39 fi 63.40 - echo -n "Stopping $DESC: $NAME... " 63.41 + action 'Stopping %s: %s...' "$DESC" $NAME 63.42 kill `cat $PIDFILE` 63.43 status 63.44 ;; 63.45 restart) 63.46 if ! active_pidfile $PIDFILE vmtoolsd ; then 63.47 - echo "$NAME is not running." 63.48 + _ '%s is not running.' $NAME 63.49 exit 1 63.50 fi 63.51 - echo -n "Restarting $DESC: $NAME... " 63.52 - kill `cat $PIDFILE` 63.53 + action 'Restarting %s: %s...' "$DESC" $NAME 63.54 + kill $(cat $PIDFILE) 63.55 sleep 2 63.56 $DAEMON $OPTIONS 63.57 status 63.58 ;; 63.59 *) 63.60 - echo "" 63.61 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 63.62 - echo "" 63.63 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 63.64 + newline 63.65 exit 1 63.66 ;; 63.67 esac
64.1 --- a/openerp-server/stuff/etc/init.d/openerp-server Wed May 25 23:07:05 2016 +0200 64.2 +++ b/openerp-server/stuff/etc/init.d/openerp-server Thu May 26 20:16:45 2016 +0300 64.3 @@ -1,5 +1,5 @@ 64.4 #!/bin/sh 64.5 -# /etc/init.d/openerp-server : Start, stop and restart OpenERP server on SliTaz, at 64.6 +# /etc/init.d/openerp-server : Start, stop and restart OpenERP server on SliTaz, at 64.7 # boot time or with the command line. 64.8 # 64.9 # To start OpenERP server at boot time, just put openerp-server in the $RUN_DAEMONS 64.10 @@ -9,7 +9,7 @@ 64.11 . /etc/daemons.conf 64.12 64.13 NAME=OpenERP 64.14 -DESC="OpenERP server" 64.15 +DESC="$(_ '%s server' OpenERP)" 64.16 DAEMON=/usr/bin/openerp-server 64.17 OPTIONS=$OPENERP_OPTIONS 64.18 PIDFILE=/var/run/openerp/openerp-server.pid 64.19 @@ -30,44 +30,43 @@ 64.20 case "$1" in 64.21 start) 64.22 if active_pidfile $PIDFILE python ; then 64.23 - echo "$NAME already running (PID: `cat $PIDFILE`)." 64.24 + _ '%s is already running.' $NAME 64.25 exit 1 64.26 fi 64.27 - echo -n "Starting $DESC: $NAME... " 64.28 + action 'Starting %s: %s...' "$DESC" $NAME 64.29 $DAEMON $OPTIONS & 64.30 status 64.31 sleep 4 64.32 - # At boot OpenERP dont start correctly if we start it in background. 64.33 + # At boot OpenERP don't start correctly if we start it in background. 64.34 if ! active_pidfile $PIDFILE python ; then 64.35 sleep 6 64.36 $DAEMON $OPTIONS > $LOGFILE 64.37 fi ;; 64.38 stop) 64.39 if ! active_pidfile $PIDFILE python ; then 64.40 - echo "$NAME is not running." 64.41 + _ '%s is not running.' $NAME 64.42 exit 1 64.43 fi 64.44 - echo -n "Stopping $DESC: $NAME... " 64.45 - kill `cat $PIDFILE` 64.46 + action 'Stopping %s: %s...' "$DESC" $NAME 64.47 + kill $(cat $PIDFILE) 64.48 rm -f $PIDFILE 64.49 status 64.50 sleep 2 ;; 64.51 restart) 64.52 if ! active_pidfile $PIDFILE python ; then 64.53 - echo "$NAME is not running." 64.54 + _ '%s is not running.' $NAME 64.55 exit 1 64.56 fi 64.57 - echo -n "Restarting $DESC: $NAME... " 64.58 - kill `cat $PIDFILE` 64.59 - rm -f $PIDFILE 2> /dev/null 64.60 + action 'Restarting %s: %s...' "$DESC" $NAME 64.61 + kill $(cat $PIDFILE) 64.62 + rm -f $PIDFILE 2>/dev/null 64.63 sleep 2 64.64 $DAEMON $OPTIONS & 64.65 status 64.66 sleep 2 ;; 64.67 *) 64.68 - echo "" 64.69 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 64.70 - echo "" 64.71 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 64.72 + newline 64.73 exit 1 ;; 64.74 esac 64.75
65.1 --- a/openerp-web/stuff/etc/init.d/openerp-web Wed May 25 23:07:05 2016 +0200 65.2 +++ b/openerp-web/stuff/etc/init.d/openerp-web Thu May 26 20:16:45 2016 +0300 65.3 @@ -1,5 +1,5 @@ 65.4 #!/bin/sh 65.5 -# /etc/init.d/openerp-web : Start, stop and restart openerp-web server on SliTaz, at 65.6 +# /etc/init.d/openerp-web : Start, stop and restart openerp-web server on SliTaz, at 65.7 # boot time or with the command line. 65.8 # 65.9 # To start openerp-web server at boot time, just put etiny in the $RUN_DAEMONS 65.10 @@ -9,7 +9,7 @@ 65.11 . /etc/daemons.conf 65.12 65.13 NAME=openerp-web 65.14 -DESC="openerp-web server" 65.15 +DESC="$(_ 'openerp-web server')" 65.16 DAEMON=/usr/bin/openerp-web 65.17 OPTIONS=$OPENERP_WEB_OPTIONS 65.18 PIDFILE=/var/run/openerp-web.pid 65.19 @@ -19,37 +19,36 @@ 65.20 case "$1" in 65.21 start) 65.22 if active_pidfile $PIDFILE $NAME ; then 65.23 - echo "$NAME already running." 65.24 + _ '%s is already running.' $NAME 65.25 exit 1 65.26 fi 65.27 - echo -n "Starting $DESC: $NAME... " 65.28 + action 'Starting %s: %s...' "$DESC" $NAME 65.29 $DAEMON $OPTIONS & 65.30 status 65.31 sleep 2 ;; 65.32 stop) 65.33 if ! active_pidfile $PIDFILE $NAME ; then 65.34 - echo "$NAME is not running." 65.35 + _ '%s is not running.' $NAME 65.36 exit 1 65.37 fi 65.38 - echo -n "Stopping $DESC: $NAME... " 65.39 - kill `cat $PIDFILE` 65.40 + action 'Stopping %s: %s...' "$DESC" $NAME 65.41 + kill $(cat $PIDFILE) 65.42 status 65.43 sleep 2 ;; 65.44 restart) 65.45 if ! active_pidfile $PIDFILE $NAME ; then 65.46 - echo "$NAME is not running." 65.47 + _ '%s is not running.' $NAME 65.48 exit 1 65.49 fi 65.50 - echo -n "Restarting $DESC: $NAME... " 65.51 - kill `cat $PIDFILE` 65.52 + action 'Restarting %s: %s...' "$DESC" $NAME 65.53 + kill $(cat $PIDFILE) 65.54 sleep 2 65.55 $DAEMON $OPTIONS & 65.56 status 65.57 sleep 2 ;; 65.58 *) 65.59 - echo "" 65.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 65.61 - echo "" 65.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 65.63 + newline 65.64 exit 1 ;; 65.65 esac 65.66
66.1 --- a/openldap/stuff/etc/init.d/openldap Wed May 25 23:07:05 2016 +0200 66.2 +++ b/openldap/stuff/etc/init.d/openldap Thu May 26 20:16:45 2016 +0300 66.3 @@ -1,5 +1,5 @@ 66.4 #!/bin/sh 66.5 -# /etc/init.d/openldap : Start, stop and restart LDAP server on SliTaz, at 66.6 +# /etc/init.d/openldap : Start, stop and restart LDAP server on SliTaz, at 66.7 # boot time or with the command line. 66.8 # 66.9 # To start LDAP server at boot time, just put openldap in the $RUN_DAEMONS 66.10 @@ -9,7 +9,7 @@ 66.11 . /etc/daemons.conf 66.12 66.13 NAME=Openldap 66.14 -DESC="LDAP server" 66.15 +DESC="$(_ '%s server' LDAP)" 66.16 DAEMON=/usr/lib/openldap/slapd 66.17 OPTIONS=$LDAP_OPTIONS 66.18 PIDFILE=/var/lib/openldap/run/slapd.pid 66.19 @@ -17,43 +17,42 @@ 66.20 case "$1" in 66.21 start) 66.22 if active_pidfile $PIDFILE slapd ; then 66.23 - echo "$NAME already running." 66.24 + _ '%s is already running.' $NAME 66.25 exit 1 66.26 fi 66.27 - echo -n "Starting $DESC: $NAME... " 66.28 + action 'Starting %s: %s...' "$DESC" $NAME 66.29 $DAEMON $OPTIONS && sleep 2 66.30 status 66.31 for i in /etc/ldap.d/* ; do 66.32 - [ -x $i ] || continue 66.33 - echo -n "Running $i..." 66.34 - $i 66.35 - status 66.36 + [ -x $i ] || continue 66.37 + action 'Running %s...' $i 66.38 + $i 66.39 + status 66.40 done 66.41 ;; 66.42 stop) 66.43 if ! active_pidfile $PIDFILE slapd ; then 66.44 - echo "$NAME is not running." 66.45 + _ '%s is not running.' $NAME 66.46 exit 1 66.47 fi 66.48 - echo -n "Stopping $DESC: $NAME... " 66.49 - kill `cat $PIDFILE` 66.50 + action 'Stopping %s: %s...' "$DESC" $NAME 66.51 + kill $(cat $PIDFILE) 66.52 status 66.53 ;; 66.54 restart) 66.55 if ! active_pidfile $PIDFILE slapd ; then 66.56 - echo "$NAME is not running." 66.57 + _ '%s is not running.' $NAME 66.58 exit 1 66.59 fi 66.60 - echo -n "Restarting $DESC: $NAME... " 66.61 - kill `cat $PIDFILE` 66.62 + action 'Restarting %s: %s...' "$DESC" $NAME 66.63 + kill $(cat $PIDFILE) 66.64 sleep 2 66.65 $DAEMON $OPTIONS && sleep 2 66.66 status 66.67 ;; 66.68 *) 66.69 - echo "" 66.70 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 66.71 - echo "" 66.72 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 66.73 + newline 66.74 exit 1 66.75 ;; 66.76 esac
67.1 --- a/openssh/stuff/openssh Wed May 25 23:07:05 2016 +0200 67.2 +++ b/openssh/stuff/openssh Thu May 26 20:16:45 2016 +0300 67.3 @@ -9,7 +9,7 @@ 67.4 . /etc/daemons.conf 67.5 67.6 NAME=OpenSSH 67.7 -DESC="OpenSSH server" 67.8 +DESC="$(_ '%s server' OpenSSH)" 67.9 DAEMON=/usr/sbin/sshd 67.10 OPTIONS=$OPENSSH_OPTIONS 67.11 PIDFILE=/var/run/sshd.pid 67.12 @@ -20,47 +20,47 @@ 67.13 start) 67.14 # We need rsa and dsa host key file to start dropbear. 67.15 if [ ! -f /etc/ssh/ssh_host_rsa_key ] ; then 67.16 - echo "Generating $NAME rsa key... " 67.17 + _ 'Generating OpenSSH %s key... ' rsa 67.18 ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -C '' -N '' 67.19 fi 67.20 if [ ! -f /etc/ssh/ssh_host_dsa_key ] ; then 67.21 - echo "Generating $NAME dsa key... " 67.22 + _ 'Generating OpenSSH %s key... ' dsa 67.23 ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -C '' -N '' 67.24 fi 67.25 if [ ! -f /etc/ssh/ssh_host_ecdsa_key ] ; then 67.26 - echo "Generating $NAME ecdsa key... " 67.27 + _ 'Generating OpenSSH %s key... ' ecdsa 67.28 ssh-keygen -t ecdsa -f /etc/ssh/ssh_host_ecdsa_key -C '' -N '' 67.29 fi 67.30 if active_pidfile $PIDFILE sshd ; then 67.31 - echo "$NAME already running." 67.32 + _ '%s is already running.' $NAME 67.33 exit 1 67.34 fi 67.35 - action "Starting $DESC: $NAME... " 67.36 + action 'Starting %s: %s...' "$DESC" $NAME 67.37 $DAEMON $OPTIONS 67.38 status 67.39 ;; 67.40 stop) 67.41 if ! active_pidfile $PIDFILE sshd ; then 67.42 - echo "$NAME is not running." 67.43 + _ '%s is not running.' $NAME 67.44 exit 1 67.45 fi 67.46 - action "Stopping $DESC: $NAME... " 67.47 + action 'Stopping %s: %s...' "$DESC" $NAME 67.48 kill $(cat $PIDFILE) 67.49 status 67.50 ;; 67.51 restart) 67.52 if ! active_pidfile $PIDFILE sshd ; then 67.53 - echo "$NAME is not running." 67.54 + _ '%s is not running.' $NAME 67.55 exit 1 67.56 fi 67.57 - action "Restarting $DESC: $NAME... " 67.58 + action 'Restarting %s: %s...' "$DESC" $NAME 67.59 kill $(cat $PIDFILE) 67.60 sleep 2 67.61 $DAEMON $OPTIONS 67.62 status 67.63 ;; 67.64 *) 67.65 - emsg "<n><b>Usage:</b> /etc/init.d/$(basename $0) [start|stop|restart]" 67.66 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 67.67 newline 67.68 exit 1 67.69 ;;
68.1 --- a/openvpn/stuff/etc/init.d/openvpn-client Wed May 25 23:07:05 2016 +0200 68.2 +++ b/openvpn/stuff/etc/init.d/openvpn-client Thu May 26 20:16:45 2016 +0300 68.3 @@ -9,7 +9,7 @@ 68.4 . /etc/daemons.conf 68.5 68.6 NAME=OpenVPN 68.7 -DESC="VPN daemon" 68.8 +DESC="$(_ '%s daemon' VPN)" 68.9 DAEMON=/usr/sbin/openvpn 68.10 OPTIONS=$OPENVPN_OPTIONS 68.11 PIDFILE=/var/run/openvpni-client.pid 68.12 @@ -17,60 +17,60 @@ 68.13 checktundevice() { 68.14 if [ ! -e /dev/net/tun ]; then 68.15 if ! modprobe tun ; then 68.16 - echo -n "TUN/TAP support is not available in this kernel" 68.17 + _ 'TUN/TAP support is not available in this Kernel' 68.18 return 1 68.19 fi 68.20 fi 68.21 - if [ -h /dev/net/tun ] && [ -c /dev/misc/net/tun ]; then 68.22 - echo -n "Detected broken /dev/net/tun symlink, fixing..." 68.23 + if [ -h /dev/net/tun -a -c /dev/misc/net/tun ]; then 68.24 + _ 'Detected broken %s symlink, fixing...' '/dev/net/tun' 68.25 rm -f /dev/net/tun 68.26 ln -s /dev/misc/net/tun /dev/net/tun 68.27 fi 68.28 } 68.29 68.30 [ -d /var/run/openvpn ] || mkdir -p /var/run/openvpn 68.31 + 68.32 case "$1" in 68.33 start) 68.34 checktundevice 68.35 68.36 if [ ! -e /etc/openvpn/client.conf ]; then 68.37 - echo "Missing OpenVPN client config." 68.38 + _ 'Missing OpenVPN client config.' 68.39 exit 1 68.40 fi 68.41 if active_pidfile $PIDFILE openvpn ; then 68.42 - echo "$NAME already running." 68.43 + _ '%s is already running.' $NAME 68.44 exit 1 68.45 fi 68.46 - echo -n "Starting $DESC: $NAME... " 68.47 + action 'Starting %s: %s...' "$DESC" $NAME 68.48 $DAEMON --client $OPTIONS 68.49 status 68.50 ;; 68.51 stop) 68.52 if ! active_pidfile $PIDFILE openvpn ; then 68.53 - echo "$NAME is not running." 68.54 + _ '%s is not running.' $NAME 68.55 exit 1 68.56 fi 68.57 - echo -n "Stopping $DESC: $NAME... " 68.58 - kill `cat $PIDFILE` 68.59 + action 'Stopping %s: %s...' "$DESC" $NAME 68.60 + kill $(cat $PIDFILE) 68.61 rm $PIDFILE 68.62 status 68.63 ;; 68.64 restart) 68.65 if ! active_pidfile $PIDFILE openvpn ; then 68.66 - echo "$NAME is not running." 68.67 + _ '%s is not running.' $NAME 68.68 exit 1 68.69 fi 68.70 - echo -n "Restarting $DESC: $NAME... " 68.71 - kill `cat $PIDFILE` 68.72 + action 'Restarting %s: %s...' "$DESC" $NAME 68.73 + kill $(cat $PIDFILE) 68.74 rm $PIDFILE 68.75 sleep 2 68.76 $DAEMON --client $OPTIONS 68.77 status 68.78 ;; 68.79 *) 68.80 - echo "" 68.81 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 68.82 - echo "" 68.83 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 68.84 + newline 68.85 exit 1 68.86 ;; 68.87 esac
69.1 --- a/openvpn/stuff/etc/init.d/openvpn-server Wed May 25 23:07:05 2016 +0200 69.2 +++ b/openvpn/stuff/etc/init.d/openvpn-server Thu May 26 20:16:45 2016 +0300 69.3 @@ -9,7 +9,7 @@ 69.4 . /etc/daemons.conf 69.5 69.6 NAME=OpenVPN 69.7 -DESC="VPN daemon" 69.8 +DESC="$(_ '%s daemon' VPN)" 69.9 DAEMON=/usr/sbin/openvpn 69.10 OPTIONS=$OPENVPN_OPTIONS 69.11 PIDFILE=/var/run/openvpn-server.pid 69.12 @@ -17,60 +17,60 @@ 69.13 checktundevice() { 69.14 if [ ! -e /dev/net/tun ]; then 69.15 if ! modprobe tun ; then 69.16 - echo -n "TUN/TAP support is not available in this kernel" 69.17 + _ 'TUN/TAP support is not available in this Kernel' 69.18 return 1 69.19 fi 69.20 fi 69.21 - if [ -h /dev/net/tun ] && [ -c /dev/misc/net/tun ]; then 69.22 - echo -n "Detected broken /dev/net/tun symlink, fixing..." 69.23 + if [ -h /dev/net/tun -a -c /dev/misc/net/tun ]; then 69.24 + _ 'Detected broken %s symlink, fixing...' '/dev/net/tun' 69.25 rm -f /dev/net/tun 69.26 ln -s /dev/misc/net/tun /dev/net/tun 69.27 fi 69.28 } 69.29 69.30 [ -d /var/run/openvpn ] || mkdir -p /var/run/openvpn 69.31 + 69.32 case "$1" in 69.33 start) 69.34 checktundevice 69.35 69.36 if [ ! -e /etc/openvpn/server.conf ]; then 69.37 - echo "Missing OpenVPN server config." 69.38 - exit 1 69.39 + _ 'Missing OpenVPN server config.' 69.40 + exit 1 69.41 fi 69.42 if active_pidfile $PIDFILE openvpn ; then 69.43 - echo "$NAME already running." 69.44 + _ '%s is already running.' $NAME 69.45 exit 1 69.46 fi 69.47 - echo -n "Starting $DESC: $NAME... " 69.48 + action 'Starting %s: %s...' "$DESC" $NAME 69.49 $DAEMON $OPTIONS 69.50 status 69.51 ;; 69.52 stop) 69.53 if ! active_pidfile $PIDFILE openvpn ; then 69.54 - echo "$NAME is not running." 69.55 + _ '%s is not running.' $NAME 69.56 exit 1 69.57 fi 69.58 - echo -n "Stopping $DESC: $NAME... " 69.59 - kill `cat $PIDFILE` 69.60 + action 'Stopping %s: %s...' "$DESC" $NAME 69.61 + kill $(cat $PIDFILE) 69.62 rm $PIDFILE 69.63 status 69.64 ;; 69.65 restart) 69.66 if ! active_pidfile $PIDFILE openvpn ; then 69.67 - echo "$NAME is not running." 69.68 + _ '%s is not running.' $NAME 69.69 exit 1 69.70 fi 69.71 - echo -n "Restarting $DESC: $NAME... " 69.72 - kill `cat $PIDFILE` 69.73 + action 'Restarting %s: %s...' "$DESC" $NAME 69.74 + kill $(cat $PIDFILE) 69.75 rm $PIDFILE 69.76 sleep 2 69.77 $DAEMON $OPTIONS 69.78 status 69.79 ;; 69.80 *) 69.81 - echo "" 69.82 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 69.83 - echo "" 69.84 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 69.85 + newline 69.86 exit 1 69.87 ;; 69.88 esac
70.1 --- a/partimage/stuff/etc/init.d/partimaged Wed May 25 23:07:05 2016 +0200 70.2 +++ b/partimage/stuff/etc/init.d/partimaged Thu May 26 20:16:45 2016 +0300 70.3 @@ -9,7 +9,7 @@ 70.4 . /etc/daemons.conf 70.5 70.6 NAME=partimaged 70.7 -DESC="Partimage Server" 70.8 +DESC="$(_ '%s server' Partimage)" 70.9 DAEMON=/usr/sbin/partimaged 70.10 IMAGES_DIR=/var/lib/partimaged 70.11 OPTIONS="-D -d ${IMAGES_DIR}" 70.12 @@ -17,45 +17,43 @@ 70.13 70.14 70.15 test -f $DAEMON || exit 0 70.16 - 70.17 - 70.18 - 70.19 + 70.20 case "$1" in 70.21 - start) 70.22 - if active_pidfile $PIDFILE $NAME ; then 70.23 - echo "$NAME already running." 70.24 - exit 1 70.25 - fi 70.26 - 70.27 - check_conf 70.28 - echo -n "Starting $DESC: $NAME... " 70.29 - $DAEMON $OPTIONS 70.30 - status 70.31 - 70.32 - # registering PID 70.33 - if [ $? -eq 0 ]; then 70.34 - pidof -s $NAME > $PIDFILE 70.35 - fi 70.36 - ;; 70.37 - stop) 70.38 - if ! active_pidfile $PIDFILE $NAME ; then 70.39 - echo "$NAME is not running." 70.40 - exit 1 70.41 - fi 70.42 - echo -n "Stopping $DESC: $NAME... " 70.43 - kill `cat $PIDFILE` 70.44 - rm -f $PIDFILE 70.45 - status 70.46 - ;; 70.47 - restart) 70.48 - $0 stop 70.49 - $0 start 70.50 - ;; 70.51 - *) 70.52 - echo "Usage: $DAEMON {start|stop|reload|restart}" 70.53 - exit 1 70.54 - ;; 70.55 + start) 70.56 + if active_pidfile $PIDFILE $NAME ; then 70.57 + _ '%s is already running.' $NAME 70.58 + exit 1 70.59 + fi 70.60 + 70.61 + check_conf 70.62 + action 'Starting %s: %s...' "$DESC" $NAME 70.63 + $DAEMON $OPTIONS 70.64 + status 70.65 + 70.66 + # registering PID 70.67 + if [ $? -eq 0 ]; then 70.68 + pidof -s $NAME > $PIDFILE 70.69 + fi 70.70 + ;; 70.71 + stop) 70.72 + if ! active_pidfile $PIDFILE $NAME ; then 70.73 + _ '%s is not running.' $NAME 70.74 + exit 1 70.75 + fi 70.76 + action 'Stopping %s: %s...' "$DESC" $NAME 70.77 + kill $(cat $PIDFILE) 70.78 + rm -f $PIDFILE 70.79 + status 70.80 + ;; 70.81 + restart) 70.82 + $0 stop 70.83 + $0 start 70.84 + ;; 70.85 + *) 70.86 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 70.87 + newline 70.88 + exit 1 70.89 + ;; 70.90 esac 70.91 70.92 exit 0 70.93 -
71.1 --- a/pcsc-lite/stuff/init.d/pcscd Wed May 25 23:07:05 2016 +0200 71.2 +++ b/pcsc-lite/stuff/init.d/pcscd Thu May 26 20:16:45 2016 +0300 71.3 @@ -7,25 +7,26 @@ 71.4 . /etc/daemons.conf 71.5 71.6 NAME=Pcscd 71.7 -DESC="PC/SC smart card daemon" 71.8 +DESC="$(_ 'PC/SC smart card daemon')" 71.9 DAEMON=/usr/sbin/pcscd 71.10 PIDFILE=/run/pcscd/pcscd.pid 71.11 71.12 case "$1" in 71.13 start) 71.14 if active_pidfile $PIDFILE pcscd ; then 71.15 - echo "$NAME already running." 71.16 + _ '%s is already running.' $NAME 71.17 exit 1 71.18 fi 71.19 - echo "Starting $DESC: $NAME... " 71.20 + action 'Starting %s: %s...' "$DESC" $NAME 71.21 mkdir -p $(dirname $PIDFILE) 71.22 - $DAEMON $PCSCD_OPTIONS ;; 71.23 + $DAEMON $PCSCD_OPTIONS 71.24 + status ;; 71.25 stop) 71.26 if ! active_pidfile $PIDFILE pcscd ; then 71.27 - echo "$NAME is not running." 71.28 + _ '%s is not running.' $NAME 71.29 exit 1 71.30 fi 71.31 - echo -n "Stopping $DESC: $NAME... " 71.32 + action 'Stopping %s: %s...' "$DESC" $NAME 71.33 kill $(cat $PIDFILE) 71.34 [ -e $PIDFILE ] && rm -f $PIDFILE 71.35 status ;; 71.36 @@ -34,9 +35,8 @@ 71.37 sleep 2 71.38 $0 start ;; 71.39 *) 71.40 - echo "" 71.41 - echo -e "\033[1mUsage:\033[0m /etc/init.d/$(basename $0) [start|stop|restart]" 71.42 - echo "" 71.43 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 71.44 + newline 71.45 exit 1 ;; 71.46 esac 71.47
72.1 --- a/perdition/stuff/etc/init.d/perdition Wed May 25 23:07:05 2016 +0200 72.2 +++ b/perdition/stuff/etc/init.d/perdition Thu May 26 20:16:45 2016 +0300 72.3 @@ -10,7 +10,7 @@ 72.4 . /etc/daemons.conf 72.5 72.6 NAME=Perdition 72.7 -DESC="IMAP/POP3 proxy server" 72.8 +DESC="$(_ 'IMAP/POP3 proxy server')" 72.9 DAEMON=/usr/sbin/perdition 72.10 OPTIONS=$PERDITION_OPTIONS 72.11 PIDFILE=/var/run/perdition 72.12 @@ -22,12 +22,12 @@ 72.13 for i in $PROTOCOLS; do 72.14 [ -s /etc/perdition/perdition.$i.conf ] || continue 72.15 if active_pidfile $PIDFILE.$i/perdition.$i.pid perdition.$i ; then 72.16 - echo "$NAME ($i) already running." 72.17 - continue 72.18 + _ '%s is already running.' "$NAME ($i)" 72.19 + continue 72.20 fi 72.21 - echo -n "Starting $DESC: $NAME ($i)... " 72.22 + action 'Starting %s: %s...' "$DESC" "$NAME ($i)" 72.23 $DAEMON.$i -f /etc/perdition/perdition.$i.conf $OPTIONS \ 72.24 - --pid_file $PIDFILE.$i/perdition.$i.pid 72.25 + --pid_file $PIDFILE.$i/perdition.$i.pid 72.26 status 72.27 done 72.28 ;; 72.29 @@ -35,11 +35,11 @@ 72.30 for i in $PROTOCOLS; do 72.31 [ -s /etc/perdition/perdition.$i.conf ] || continue 72.32 if ! active_pidfile $PIDFILE.$i/perdition.$i.pid perdition.$i ; then 72.33 - echo "$NAME ($i) is not running." 72.34 - continue 72.35 + _ '%s is not running.' "$NAME ($i)" 72.36 + continue 72.37 fi 72.38 - echo -n "Stopping $DESC: $NAME ($i)... " 72.39 - kill `cat $PIDFILE.$i/perdition.$i.pid` 72.40 + action 'Stopping %s: %s...' "$DESC" "$NAME ($i)" 72.41 + kill $(cat $PIDFILE.$i/perdition.$i.pid) 72.42 status 72.43 done 72.44 ;; 72.45 @@ -47,14 +47,14 @@ 72.46 for i in $PROTOCOLS; do 72.47 [ -s /etc/perdition/perdition.$i.conf ] || continue 72.48 if ! active_pidfile $PIDFILE.$i/perdition.$i.pid perdition.$i ; then 72.49 - echo "$NAME ($i) is not running." 72.50 - continue 72.51 + _ '%s is not running.' "$NAME ($i)" 72.52 + continue 72.53 fi 72.54 - echo -n "Restarting $DESC: $NAME ($i)... " 72.55 - kill `cat $PIDFILE.$i/perdition.$i.pid` 72.56 + action 'Restarting %s: %s...' "$DESC" "$NAME ($i)" 72.57 + kill $(cat $PIDFILE.$i/perdition.$i.pid) 72.58 sleep 2 72.59 $DAEMON.$i -f /etc/perdition/perdition.$i.conf $OPTIONS \ 72.60 - --pid_file $PIDFILE.$i/perdition.$i.pid 72.61 + --pid_file $PIDFILE.$i/perdition.$i.pid 72.62 status 72.63 done 72.64 ;; 72.65 @@ -62,14 +62,13 @@ 72.66 for i in $PROTOCOLS; do 72.67 [ -s /etc/perdition/perdition.$i.conf ] || continue 72.68 active_pidfile $PIDFILE.$i/perdition.$i.pid perdition.$i && \ 72.69 - kill -1 `cat $PIDFILE.$i/perdition.$i.pid` 72.70 + kill -1 $(cat $PIDFILE.$i/perdition.$i.pid) 72.71 status 72.72 done 72.73 ;; 72.74 *) 72.75 - echo "" 72.76 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart|reload]" 72.77 - echo "" 72.78 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload]" 72.79 + newline 72.80 exit 1 72.81 ;; 72.82 esac
73.1 --- a/phpvirtualbox/stuff/etc/init.d/vboxwebsrv Wed May 25 23:07:05 2016 +0200 73.2 +++ b/phpvirtualbox/stuff/etc/init.d/vboxwebsrv Thu May 26 20:16:45 2016 +0300 73.3 @@ -1,5 +1,5 @@ 73.4 #!/bin/sh 73.5 -# Start, stop and restart vboxwebsrv deamon on SliTaz, at boot time or 73.6 +# Start, stop and restart vboxwebsrv deamon on SliTaz, at boot time or 73.7 # with the command line. 73.8 # 73.9 # To start daemon at boot time, just put vboxwebsrv in the $RUN_DAEMONS 73.10 @@ -8,7 +8,7 @@ 73.11 . /etc/init.d/rc.functions 73.12 73.13 NAME=$(basename $0) 73.14 -DESC="$NAME deamon" 73.15 +DESC="$(_ '%s daemon' $NAME)" 73.16 DAEMON=$(which $NAME) 73.17 OPTIONS="-b --logfile /dev/null" 73.18 eval $(grep -i ^${NAME}_OPTIONS /etc/daemons.conf | sed 's/.*_OPT/OPT/') 73.19 @@ -17,41 +17,40 @@ 73.20 case "$1" in 73.21 start) 73.22 if active_pidfile $PIDFILE $NAME ; then 73.23 - echo "$NAME is already running." 73.24 + _ '%s is already running.' $NAME 73.25 exit 1 73.26 fi 73.27 - echo -n "Starting $DESC: $NAME... " 73.28 - $DAEMON $OPTIONS > /dev/null 2>&1 73.29 - [ -f $PIDFILE ] || pidof $NAME | awk '{ print $1 }' > $PIDFILE 73.30 + action 'Starting %s: %s...' "$DESC" $NAME 73.31 + $DAEMON $OPTIONS >/dev/null 2>&1 73.32 + [ -f $PIDFILE ] || pidof $NAME | awk '{print $1}' > $PIDFILE 73.33 active_pidfile $PIDFILE $NAME 73.34 status 73.35 ;; 73.36 stop) 73.37 if ! active_pidfile $PIDFILE $NAME ; then 73.38 - echo "$NAME is not running." 73.39 + _ '%s is not running.' $NAME 73.40 exit 1 73.41 fi 73.42 - echo -n "Stopping $DESC: $NAME... " 73.43 - kill `cat $PIDFILE` 73.44 + action 'Stopping %s: %s...' "$DESC" $NAME 73.45 + kill $(cat $PIDFILE) 73.46 status 73.47 ;; 73.48 restart) 73.49 if ! active_pidfile $PIDFILE $NAME ; then 73.50 - echo "$NAME is not running." 73.51 + _ '%s is not running.' $NAME 73.52 exit 1 73.53 fi 73.54 - echo -n "Restarting $DESC: $NAME... " 73.55 - kill `cat $PIDFILE` 73.56 + action 'Restarting %s: %s...' "$DESC" $NAME 73.57 + kill $(cat $PIDFILE) 73.58 sleep 2 73.59 - $DAEMON $OPTIONS > /dev/null 2>&1 73.60 - [ -f $PIDFILE ] || pidof $NAME | awk '{ print $1 }' > $PIDFILE 73.61 + $DAEMON $OPTIONS >/dev/null 2>&1 73.62 + [ -f $PIDFILE ] || pidof $NAME | awk '{print $1}' > $PIDFILE 73.63 active_pidfile $PIDFILE $NAME 73.64 status 73.65 ;; 73.66 -*) 73.67 - echo "" 73.68 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 73.69 - echo "" 73.70 + *) 73.71 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 73.72 + newline 73.73 exit 1 73.74 ;; 73.75 esac
74.1 --- a/portmap/stuff/init.d/portmap Wed May 25 23:07:05 2016 +0200 74.2 +++ b/portmap/stuff/init.d/portmap Thu May 26 20:16:45 2016 +0300 74.3 @@ -9,7 +9,7 @@ 74.4 . /etc/daemons.conf 74.5 74.6 NAME=portmap 74.7 -DESC="RPC portmapper" 74.8 +DESC="$(_ 'RPC portmapper')" 74.9 DAEMON=/usr/sbin/portmap 74.10 OPTIONS= 74.11 PIDFILE=/var/run/$NAME.pid 74.12 @@ -18,55 +18,54 @@ 74.13 test -f $DAEMON || exit 0 74.14 74.15 case "$1" in 74.16 - start) 74.17 - if active_pidfile $PIDFILE portmap ; then 74.18 - echo "$NAME already running." 74.19 - exit 1 74.20 - fi 74.21 + start) 74.22 + if active_pidfile $PIDFILE portmap ; then 74.23 + _ '%s is already running.' $NAME 74.24 + exit 1 74.25 + fi 74.26 74.27 - echo -n "Starting $DESC: $NAME... " 74.28 - $DAEMON $OPTIONS 74.29 - 74.30 - # registering PID 74.31 - if [ $? -eq 0 ]; then 74.32 - pidof -s $NAME > $PIDFILE 74.33 - fi 74.34 - status 74.35 - 74.36 - if [ -f /var/run/portmap.upgrade-state ]; then 74.37 - echo -n "Restoring old RPC service information..." 74.38 - sleep 1 # needs a short pause or pmap_set won't work. :( 74.39 - pmap_set </var/run/portmap.upgrade-state 74.40 - rm -f /var/run/portmap.upgrade-state 74.41 - echo "done." 74.42 - fi 74.43 + action 'Starting %s: %s...' "$DESC" $NAME 74.44 + $DAEMON $OPTIONS 74.45 74.46 - ;; 74.47 - stop) 74.48 - if ! active_pidfile $PIDFILE portmap ; then 74.49 - echo "$NAME is not running." 74.50 - exit 1 74.51 - fi 74.52 - echo -n "Stopping $DESC: $NAME... " 74.53 - kill `cat $PIDFILE` 74.54 - rm -f $PIDFILE 74.55 - status 74.56 - ;; 74.57 - restart) 74.58 - pmap_dump >/var/run/portmap.state 74.59 - $0 stop 74.60 - $0 start 74.61 - if [ ! -f /var/run/portmap.upgrade-state ]; then 74.62 - sleep 1 74.63 - pmap_set </var/run/portmap.state 74.64 - fi 74.65 - rm -f /var/run/portmap.state 74.66 - ;; 74.67 - *) 74.68 - echo "Usage: $DAEMON {start|stop|reload|restart}" 74.69 - exit 1 74.70 - ;; 74.71 + # registering PID 74.72 + if [ $? -eq 0 ]; then 74.73 + pidof -s $NAME > $PIDFILE 74.74 + fi 74.75 + status 74.76 + 74.77 + if [ -f /var/run/portmap.upgrade-state ]; then 74.78 + action 'Restoring old RPC service information...' 74.79 + sleep 1 # needs a short pause or pmap_set won't work. :( 74.80 + pmap_set </var/run/portmap.upgrade-state 74.81 + rm -f /var/run/portmap.upgrade-state 74.82 + status 74.83 + fi 74.84 + ;; 74.85 + stop) 74.86 + if ! active_pidfile $PIDFILE portmap ; then 74.87 + _ '%s is not running.' $NAME 74.88 + exit 1 74.89 + fi 74.90 + action 'Stopping %s: %s...' "$DESC" $NAME 74.91 + kill $(cat $PIDFILE) 74.92 + rm -f $PIDFILE 74.93 + status 74.94 + ;; 74.95 + restart) 74.96 + pmap_dump >/var/run/portmap.state 74.97 + $0 stop 74.98 + $0 start 74.99 + if [ ! -f /var/run/portmap.upgrade-state ]; then 74.100 + sleep 1 74.101 + pmap_set </var/run/portmap.state 74.102 + fi 74.103 + rm -f /var/run/portmap.state 74.104 + ;; 74.105 + *) 74.106 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 74.107 + newline 74.108 + exit 1 74.109 + ;; 74.110 esac 74.111 74.112 exit 0 74.113 -
75.1 --- a/postfix/stuff/etc/init.d/postfix Wed May 25 23:07:05 2016 +0200 75.2 +++ b/postfix/stuff/etc/init.d/postfix Thu May 26 20:16:45 2016 +0300 75.3 @@ -9,7 +9,7 @@ 75.4 . /etc/daemons.conf 75.5 75.6 NAME=Postfix 75.7 -DESC="SMTP server" 75.8 +DESC="$(_ '%s server' SMTP)" 75.9 DAEMON=/usr/lib/postfix/master 75.10 OPTIONS=$POSTFIX_OPTIONS 75.11 PIDFILE=/var/spool/postfix/pid/master.pid 75.12 @@ -17,47 +17,46 @@ 75.13 case "$1" in 75.14 start) 75.15 if active_pidfile $PIDFILE master ; then 75.16 - echo "$NAME already running." 75.17 + _ '%s is already running.' $NAME 75.18 exit 1 75.19 fi 75.20 - echo -n "Starting $DESC: $NAME... " 75.21 + action 'Starting %s: %s...' "$DESC" $NAME 75.22 $DAEMON $OPTIONS & 75.23 status 75.24 ;; 75.25 stop) 75.26 if ! active_pidfile $PIDFILE master ; then 75.27 - echo "$NAME is not running." 75.28 + _ '%s is not running.' $NAME 75.29 exit 1 75.30 fi 75.31 - echo -n "Stopping $DESC: $NAME... " 75.32 - kill `cat $PIDFILE` && rm -f $PIDFILE 75.33 + action 'Stopping %s: %s...' "$DESC" $NAME 75.34 + kill $(cat $PIDFILE) && rm -f $PIDFILE 75.35 status 75.36 ;; 75.37 restart) 75.38 if ! active_pidfile $PIDFILE master ; then 75.39 - echo "$NAME is not running." 75.40 + _ '%s is not running.' $NAME 75.41 exit 1 75.42 fi 75.43 - echo -n "Restarting $DESC: $NAME... " 75.44 - kill `cat $PIDFILE` && rm -f $PIDFILE 75.45 + action 'Restarting %s: %s...' "$DESC" $NAME 75.46 + kill $(cat $PIDFILE) && rm -f $PIDFILE 75.47 sleep 2 75.48 $DAEMON $OPTIONS & 75.49 status 75.50 ;; 75.51 reload) 75.52 if ! active_pidfile $PIDFILE master ; then 75.53 - echo "$NAME is not running." 75.54 + _ '%s is not running.' $NAME 75.55 exit 1 75.56 fi 75.57 postsuper active || exit 1 75.58 - kill -HUP `cat $PIDFILE` 75.59 + kill -HUP $(cat $PIDFILE) 75.60 postsuper & 75.61 status 75.62 ;; 75.63 *) 75.64 - echo "" 75.65 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart|reload]" 75.66 - echo "" 75.67 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload]" 75.68 + newline 75.69 exit 1 75.70 ;; 75.71 esac
76.1 --- a/postgresql/stuff/etc/init.d/postgresql Wed May 25 23:07:05 2016 +0200 76.2 +++ b/postgresql/stuff/etc/init.d/postgresql Thu May 26 20:16:45 2016 +0300 76.3 @@ -9,7 +9,7 @@ 76.4 . /etc/daemons.conf 76.5 76.6 NAME=Postgresql 76.7 -DESC="PostgreSQL server" 76.8 +DESC="$(_ '%s server' PostgreSQL)" 76.9 OPTIONS=$PGSQL_OPTIONS 76.10 INIT_OPTIONS=$PGSQLINIT_OPTIONS 76.11 [ -n "$OPTIONS" ] || OPTIONS="-D /var/lib/pgsql -s" 76.12 @@ -18,42 +18,41 @@ 76.13 case "$1" in 76.14 start) 76.15 if [ ! -f /var/lib/pgsql/PG_VERSION ]; then 76.16 - echo "Initializing $DESC database" 76.17 - rm -rf /var/lib/pgsql/* 2> /dev/null 76.18 - su -c "initdb $INIT_OPTIONS" - postgres 76.19 + _ 'Initializing PostgreSQL server database' 76.20 + rm -rf /var/lib/pgsql/* 2>/dev/null 76.21 + su -c "initdb $INIT_OPTIONS" - postgres 76.22 fi 76.23 - echo -n "Starting $DESC: $NAME... " 76.24 + action 'Starting %s: %s...' "$DESC" $NAME 76.25 su -c "pg_ctl start -w $OPTIONS -l /var/log/postgresql/postgresql.log" - postgres 76.26 status 76.27 sleep 2 76.28 for i in /etc/pgsql.d/* ; do 76.29 - [ -x $i ] || continue 76.30 - echo -n "Running $i..." 76.31 - $i 76.32 - status 76.33 + [ -x $i ] || continue 76.34 + action 'Running %s...' $i 76.35 + $i 76.36 + status 76.37 done 76.38 -# su -c "createdb test" - postgres 76.39 -# su -c "psql test" - postgres 76.40 + # su -c "createdb test" - postgres 76.41 + # su -c "psql test" - postgres 76.42 ;; 76.43 stop) 76.44 - echo -n "Stopping $DESC: $NAME... " 76.45 + action 'Stopping %s: %s...' "$DESC" $NAME 76.46 su -c "pg_ctl stop $OPTIONS -m smart" - postgres 76.47 status 76.48 ;; 76.49 restart) 76.50 - echo -n "Restarting $DESC: $NAME... " 76.51 + action 'Restarting %s: %s...' "$DESC" $NAME 76.52 su -c "pg_ctl restart $OPTIONS -m smart" - postgres 76.53 status 76.54 ;; 76.55 reload) 76.56 - echo -n "Reloading $DESC: $NAME... " 76.57 + action 'Reloading %s: %s...' "$DESC" $NAME 76.58 su -c "pg_ctl reload $OPTIONS" - postgres 76.59 status 76.60 ;; 76.61 *) 76.62 - echo "" 76.63 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart|reload]" 76.64 - echo "" 76.65 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload]" 76.66 + newline 76.67 exit 1 76.68 ;; 76.69 esac
77.1 --- a/postgrey/stuff/etc/init.d/postgrey Wed May 25 23:07:05 2016 +0200 77.2 +++ b/postgrey/stuff/etc/init.d/postgrey Thu May 26 20:16:45 2016 +0300 77.3 @@ -1,5 +1,5 @@ 77.4 #!/bin/sh 77.5 -# /etc/init.d/postgrey : Start, stop and restart Grey list server on SliTaz, at 77.6 +# /etc/init.d/postgrey : Start, stop and restart Grey list server on SliTaz, at 77.7 # boot time or with the command line. 77.8 # 77.9 # To start Grey list server at boot time, just put postgrey in the $RUN_DAEMONS 77.10 @@ -9,7 +9,7 @@ 77.11 . /etc/daemons.conf 77.12 77.13 NAME=Postgrey 77.14 -DESC="Grey list server" 77.15 +DESC="$(_ 'Postfix Greylisting Policy Server')" 77.16 DAEMON=/usr/bin/postgrey 77.17 OPTIONS=$POSTGREY_OPTIONS 77.18 PIDFILE=/var/run/postgrey.pid 77.19 @@ -18,11 +18,11 @@ 77.20 case "$1" in 77.21 start) 77.22 if active_pidfile $PIDFILE postgrey ; then 77.23 - echo "$NAME already running." 77.24 + _ '%s is already running.' $NAME 77.25 exit 1 77.26 fi 77.27 if ! grep -q ^smtpd_recipient_restrictions /etc/postfix/main.cf; then 77.28 - echo -n "Updating /etc/postfix/main.cf" 77.29 + _ 'Updating %s' '/etc/postfix/main.cf' 77.30 cat >> /etc/postfix/main.cf <<EOF 77.31 77.32 # Add by $0 77.33 @@ -33,34 +33,33 @@ 77.34 EOF 77.35 /etc/init.d/postfix reload 77.36 fi 77.37 - echo -n "Starting $DESC: $NAME... " 77.38 + action 'Starting %s: %s...' "$DESC" $NAME 77.39 $DAEMON $OPTIONS 77.40 status 77.41 ;; 77.42 stop) 77.43 if ! active_pidfile $PIDFILE postgrey ; then 77.44 - echo "$NAME is not running." 77.45 + _ '%s is not running.' $NAME 77.46 exit 1 77.47 fi 77.48 - echo -n "Stopping $DESC: $NAME... " 77.49 - kill `cat $PIDFILE` 77.50 + action 'Stopping %s: %s...' "$DESC" $NAME 77.51 + kill $(cat $PIDFILE) 77.52 status 77.53 ;; 77.54 restart) 77.55 if ! active_pidfile $PIDFILE postgrey ; then 77.56 - echo "$NAME is not running." 77.57 + _ '%s is not running.' $NAME 77.58 exit 1 77.59 fi 77.60 - echo -n "Restarting $DESC: $NAME... " 77.61 - kill `cat $PIDFILE` 77.62 + action 'Restarting %s: %s...' "$DESC" $NAME 77.63 + kill $(cat $PIDFILE) 77.64 sleep 2 77.65 $DAEMON $OPTIONS 77.66 status 77.67 ;; 77.68 *) 77.69 - echo "" 77.70 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart|reload]" 77.71 - echo "" 77.72 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 77.73 + newline 77.74 exit 1 77.75 ;; 77.76 esac
78.1 --- a/privoxy/stuff/daemon-privoxy Wed May 25 23:07:05 2016 +0200 78.2 +++ b/privoxy/stuff/daemon-privoxy Thu May 26 20:16:45 2016 +0300 78.3 @@ -1,5 +1,5 @@ 78.4 #!/bin/sh 78.5 -# /etc/init.d/daemon-name: Start, stop and restart daemon 78.6 +# /etc/init.d/daemon-name: Start, stop and restart daemon 78.7 # on SliTaz, at boot time or with the command line. 78.8 # 78.9 # To start daemon at boot time, just put the right name in the $RUN_DAEMONS 78.10 @@ -9,7 +9,7 @@ 78.11 . /etc/daemons.conf 78.12 78.13 NAME=Privoxy 78.14 -DESC="Web proxy daemon" 78.15 +DESC="$(_ 'Web proxy daemon')" 78.16 DAEMON=/usr/sbin/privoxy 78.17 OPTIONS="--pidfile /var/run/privoxy.pid" 78.18 USER="--user privoxy" 78.19 @@ -19,39 +19,38 @@ 78.20 case "$1" in 78.21 start) 78.22 if active_pidfile $PIDFILE privoxy ; then 78.23 - echo "$NAME already running." 78.24 + _ '%s is already running.' $NAME 78.25 exit 1 78.26 fi 78.27 - echo -n "Starting $DESC: $NAME... " 78.28 - $DAEMON $OPTIONS $USER $CONFIG 2> /dev/null 78.29 + action 'Starting %s: %s...' "$DESC" $NAME 78.30 + $DAEMON $OPTIONS $USER $CONFIG 2>/dev/null 78.31 status 78.32 ;; 78.33 stop) 78.34 if ! active_pidfile $PIDFILE privoxy ; then 78.35 - echo "$NAME is not running." 78.36 + _ '%s is not running.' $NAME 78.37 exit 1 78.38 fi 78.39 - echo -n "Stopping $DESC: $NAME... " 78.40 - kill `cat $PIDFILE` 78.41 + action 'Stopping %s: %s...' "$DESC" $NAME 78.42 + kill $(cat $PIDFILE) 78.43 rm $PIDFILE 78.44 status 78.45 ;; 78.46 restart) 78.47 if ! active_pidfile $PIDFILE privoxy ; then 78.48 - echo "$NAME is not running." 78.49 + _ '%s is not running.' $NAME 78.50 exit 1 78.51 fi 78.52 - kill `cat $PIDFILE` 78.53 + kill $(cat $PIDFILE) 78.54 rm $PIDFILE 78.55 sleep 2 78.56 - echo -n "Restarting $DESC: $NAME... " 78.57 - $DAEMON $OPTIONS $USER $CONFIG 2> /dev/null 78.58 + action 'Restarting %s: %s...' "$DESC" $NAME 78.59 + $DAEMON $OPTIONS $USER $CONFIG 2>/dev/null 78.60 status 78.61 ;; 78.62 *) 78.63 - echo "" 78.64 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 78.65 - echo "" 78.66 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 78.67 + newline 78.68 exit 1 78.69 ;; 78.70 esac
79.1 --- a/pure-ftpd/stuff/pure-ftpd Wed May 25 23:07:05 2016 +0200 79.2 +++ b/pure-ftpd/stuff/pure-ftpd Thu May 26 20:16:45 2016 +0300 79.3 @@ -1,5 +1,5 @@ 79.4 #!/bin/sh 79.5 -# /etc/init.d/pure-ftpd : Start, stop and restart pure-FTPd daemon on SliTaz, at 79.6 +# /etc/init.d/pure-ftpd : Start, stop and restart pure-FTPd daemon on SliTaz, at 79.7 # boot time or with the command line. 79.8 # 79.9 # To start pure-FTPd server at boot time, just put pure-ftpd in the $RUN_DAEMONS 79.10 @@ -9,7 +9,7 @@ 79.11 . /etc/daemons.conf 79.12 79.13 NAME=pure-ftpd 79.14 -DESC="pure-FTPd Server Daemon" 79.15 +DESC="$(_ 'pure-FTPd Server Daemon')" 79.16 DAEMON=/usr/sbin/$NAME 79.17 79.18 PIDFILE=/var/run/$NAME.pid 79.19 @@ -24,37 +24,36 @@ 79.20 case "$1" in 79.21 start) 79.22 if active_pidfile $PIDFILE $NAME ; then 79.23 - echo "$NAME already running." 79.24 + _ '%s is already running.' 79.25 exit 1 79.26 fi 79.27 - echo -n "Starting $DESC: $NAME... " 79.28 + action 'Starting %s: %s...' "$DESC" $NAME 79.29 $DAEMON $OPTIONS 79.30 status 79.31 ;; 79.32 stop) 79.33 if ! active_pidfile $PIDFILE $NAME ; then 79.34 - echo "$NAME is not running." 79.35 + _ '%s is not running.' $NAME 79.36 exit 1 79.37 fi 79.38 - echo -n "Stopping $DESC: $NAME... " 79.39 - kill `cat $PIDFILE` 79.40 + action 'Stopping %s: %s...' "$DESC" $NAME 79.41 + kill $(cat $PIDFILE) 79.42 status 79.43 ;; 79.44 restart) 79.45 if ! active_pidfile $PIDFILE $NAME ; then 79.46 - echo "$NAME is not running." 79.47 + _ '%s is not running.' 79.48 exit 1 79.49 fi 79.50 - echo -n "Restarting $DESC: $NAME... " 79.51 - kill `cat $PIDFILE` 79.52 + action 'Restarting %s: %s...' "$DESC" $NAME 79.53 + kill $(cat $PIDFILE) 79.54 sleep 2 79.55 $DAEMON $OPTIONS 79.56 status 79.57 ;; 79.58 *) 79.59 - echo "" 79.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 79.61 - echo "" 79.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 79.63 + newline 79.64 exit 1 79.65 ;; 79.66 esac
80.1 --- a/rsync/stuff/etc/init.d/rsyncd Wed May 25 23:07:05 2016 +0200 80.2 +++ b/rsync/stuff/etc/init.d/rsyncd Thu May 26 20:16:45 2016 +0300 80.3 @@ -9,7 +9,7 @@ 80.4 . /etc/daemons.conf 80.5 80.6 NAME=Rsyncd 80.7 -DESC="rsync deamon" 80.8 +DESC="$(_ '%s daemon' rsync)" 80.9 DAEMON=/usr/bin/rsync 80.10 OPTIONS=$RSYNCD_OPTIONS 80.11 PIDFILE=/var/run/rsyncd.pid 80.12 @@ -17,39 +17,38 @@ 80.13 case "$1" in 80.14 start) 80.15 if active_pidfile $PIDFILE rsync ; then 80.16 - echo "$NAME already running." 80.17 + _ '%s is already running.' $NAME 80.18 exit 1 80.19 fi 80.20 - echo -n "Starting $DESC: $NAME... " 80.21 - $DAEMON $OPTIONS 80.22 + action 'Starting %s: %s...' "$DESC" $NAME 80.23 + $DAEMON $OPTIONS 80.24 status 80.25 ;; 80.26 stop) 80.27 if ! active_pidfile $PIDFILE rsync ; then 80.28 - echo "$NAME is not running." 80.29 + _ '%s is not running.' $NAME 80.30 exit 1 80.31 fi 80.32 - echo -n "Stopping $DESC: $NAME... " 80.33 - kill `cat $PIDFILE` 80.34 + action 'Stopping %s: %s...' "$DESC" $NAME 80.35 + kill $(cat $PIDFILE) 80.36 rm $PIDFILE 80.37 status 80.38 ;; 80.39 restart) 80.40 if ! active_pidfile $PIDFILE rsync ; then 80.41 - echo "$NAME is not running." 80.42 + _ '%s is not running.' $NAME 80.43 exit 1 80.44 fi 80.45 - echo -n "Restarting $DESC: $NAME... " 80.46 - kill `cat $PIDFILE` 80.47 + action 'Restarting %s: %s...' "$DESC" $NAME 80.48 + kill $(cat $PIDFILE) 80.49 rm $PIDFILE 80.50 sleep 2 80.51 $DAEMON $OPTIONS 80.52 status 80.53 ;; 80.54 *) 80.55 - echo "" 80.56 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 80.57 - echo "" 80.58 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 80.59 + newline 80.60 exit 1 80.61 ;; 80.62 esac
81.1 --- a/samba/stuff/etc/init.d/samba Wed May 25 23:07:05 2016 +0200 81.2 +++ b/samba/stuff/etc/init.d/samba Thu May 26 20:16:45 2016 +0300 81.3 @@ -1,5 +1,5 @@ 81.4 #!/bin/sh 81.5 -# /etc/init.d/samba : Start, stop and restart Samba server on SliTaz, at 81.6 +# /etc/init.d/samba : Start, stop and restart Samba server on SliTaz, at 81.7 # boot time or with the command line. 81.8 # 81.9 # To start Samba server at boot time, just put samba in the $RUN_DAEMONS 81.10 @@ -9,43 +9,44 @@ 81.11 . /etc/daemons.conf 81.12 81.13 NAME=Samba 81.14 -DESC="Samba server" 81.15 +DESC="$(_ '%s server' Samba)" 81.16 SMBD=/usr/sbin/smbd 81.17 NMBD=/usr/sbin/nmbd 81.18 NMBPIDFILE=/var/run/samba/nmbd.pid 81.19 SMBPIDFILE=/var/run/samba/smbd.pid 81.20 81.21 [ -d /var/run/samba ] || mkdir -p /var/run/samba 81.22 + 81.23 case "$1" in 81.24 start) 81.25 if active_pidfile $SMBPIDFILE smbd ; then 81.26 - echo "$NAME: $SMBD already running." 81.27 + _ '%s is already running.' "$NAME ($SMBD)" 81.28 else 81.29 - echo -n "Starting $DESC: $SMBD... " 81.30 + action 'Starting %s: %s...' "$DESC" $SMBD 81.31 $SMBD -D 81.32 status 81.33 fi 81.34 if active_pidfile $NMBPIDFILE nmbd ; then 81.35 - echo "$NAME: $NMBD already running." 81.36 + _ '%s is already running.' "$NAME ($NMBD)" 81.37 else 81.38 - echo -n "Starting $DESC: $NMBD... " 81.39 + action 'Starting %s: %s...' "$DESC" $NMBD 81.40 $NMBD -D 81.41 status 81.42 fi 81.43 ;; 81.44 stop) 81.45 if ! active_pidfile $SMBPIDFILE smbd ; then 81.46 - echo "$NAME: $SMBD is not running." 81.47 + _ '%s is not running.' "$NAME ($SMBD)" 81.48 else 81.49 - echo -n "Stopping $DESC: $SMBD... " 81.50 - kill `cat $SMBPIDFILE` 81.51 + action 'Stopping %s: %s...' "$DESC" $SMBD 81.52 + kill $(cat $SMBPIDFILE) 81.53 status 81.54 fi 81.55 if ! active_pidfile $NMBPIDFILE nmbd ; then 81.56 - echo "$NAME: $NMBD is not running." 81.57 + _ '%s is not running.' "$NAME ($NMBD)" 81.58 else 81.59 - echo -n "Stopping $DESC: $NMBD... " 81.60 - kill `cat $NMBPIDFILE` 81.61 + action 'Stopping %s: %s...' "$DESC" $NMBD 81.62 + kill $(cat $NMBPIDFILE) 81.63 status 81.64 fi 81.65 ;; 81.66 @@ -55,17 +56,16 @@ 81.67 ;; 81.68 reload) 81.69 if ! active_pidfile $SMBPIDFILE smbd ; then 81.70 - echo "$NAME is not running." 81.71 + _ '%s is not running.' $NAME 81.72 exit 1 81.73 fi 81.74 - echo -n "Reloading $DESC: $SMBD... " 81.75 - kill -HUP `cat $SMBPIDFILE` 81.76 + action 'Reloading %s: %s...' "$DESC" $SMBD 81.77 + kill -HUP $(cat $SMBPIDFILE) 81.78 status 81.79 ;; 81.80 *) 81.81 - echo "" 81.82 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart!reload]" 81.83 - echo "" 81.84 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart!reload]" 81.85 + newline 81.86 exit 1 81.87 ;; 81.88 esac
82.1 --- a/slim/stuff/etc/init.d/slim Wed May 25 23:07:05 2016 +0200 82.2 +++ b/slim/stuff/etc/init.d/slim Thu May 26 20:16:45 2016 +0300 82.3 @@ -8,7 +8,7 @@ 82.4 . /etc/init.d/rc.functions 82.5 82.6 NAME=SLiM 82.7 -DESC="Simple login manager" 82.8 +DESC="$(_ 'Simple login manager')" 82.9 DAEMON=/usr/bin/slim 82.10 OPTION="-d" 82.11 LOCK_FILE=/var/lock/slim.lock 82.12 @@ -16,29 +16,29 @@ 82.13 case "$1" in 82.14 start) 82.15 if active_pidfile $LOCK_FILE slim ; then 82.16 - echo "$NAME already running." 82.17 + _ '%s is already running.' $NAME 82.18 exit 1 82.19 fi 82.20 - echo -n "Starting $DESC: $NAME... " 82.21 + action 'Starting %s: %s...' "$DESC" $NAME 82.22 $DAEMON $OPTION 82.23 status 82.24 ;; 82.25 stop) 82.26 if ! active_pidfile $LOCK_FILE slim ; then 82.27 - echo "$NAME is not running." 82.28 + _ '%s is not running.' $NAME 82.29 exit 1 82.30 fi 82.31 - echo -n "Stopping $DESC: $NAME... " 82.32 + action 'Stopping %s: %s...' "$DESC" $NAME 82.33 killall slim 82.34 rm $LOCK_FILE 82.35 status 82.36 ;; 82.37 restart) 82.38 if ! active_pidfile $LOCK_FILE slim ; then 82.39 - echo "$NAME is not running." 82.40 + _ '%s is not running.' $NAME 82.41 exit 1 82.42 fi 82.43 - echo -n "Restarting $DESC: $NAME... " 82.44 + action 'Restarting %s: %s...' "$DESC" $NAME 82.45 killall slim 82.46 rm $LOCK_FILE 82.47 sleep 2 82.48 @@ -46,9 +46,8 @@ 82.49 status 82.50 ;; 82.51 *) 82.52 - echo "" 82.53 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 82.54 - echo "" 82.55 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 82.56 + newline 82.57 exit 1 82.58 ;; 82.59 esac
83.1 --- a/slitaz-i18n/stuff/locale-pack.conf Wed May 25 23:07:05 2016 +0200 83.2 +++ b/slitaz-i18n/stuff/locale-pack.conf Thu May 26 20:16:45 2016 +0300 83.3 @@ -1,6 +1,6 @@ 83.4 83.5 # Packages LC_MESSAGES included in the locale pack. 83.6 -CORE_PKGS="acl alsaplayer alsa-utils asunder atk attr dialog e2fsprogs \ 83.7 +CORE_PKGS="acl alsaplayer alsa-utils asunder atk attr busybox dialog e2fsprogs \ 83.8 elfutils epdfview galculator gdk-pixbuf glib glibc glib-networking gparted \ 83.9 gpicview gtk+ gvfs kbd leafpad libfm gnutls libgpg-error libidn xz libwebkit \ 83.10 lxappearance lxinput lxpanel lxrandr lxsession lxsession-edit lxtask \
84.1 --- a/smartmontools/stuff/etc/init.d/smartd Wed May 25 23:07:05 2016 +0200 84.2 +++ b/smartmontools/stuff/etc/init.d/smartd Thu May 26 20:16:45 2016 +0300 84.3 @@ -1,5 +1,5 @@ 84.4 #!/bin/sh 84.5 -# /etc/init.d/smartd : Start, stop and restart Smartmontools (SMART) daemon on SliTaz, at 84.6 +# /etc/init.d/smartd : Start, stop and restart Smartmontools (SMART) daemon on SliTaz, at 84.7 # boot time or with the command line. 84.8 # 84.9 # To start SMART monitoring at boot time, just put smartd in the $RUN_DAEMONS 84.10 @@ -9,7 +9,7 @@ 84.11 . /etc/daemons.conf 84.12 84.13 NAME=smartd 84.14 -DESC="Smartmontools (SMART) Daemon" 84.15 +DESC="$(_ 'Smartmontools (SMART) Daemon')" 84.16 DAEMON=/usr/sbin/smartd 84.17 84.18 PIDFILE=/var/run/smartd.pid 84.19 @@ -18,37 +18,36 @@ 84.20 case "$1" in 84.21 start) 84.22 if active_pidfile $PIDFILE smartd ; then 84.23 - echo "$NAME already running." 84.24 + _ '%s is already running.' $NAME 84.25 exit 1 84.26 fi 84.27 - echo -n "Starting $DESC: $NAME... " 84.28 + action 'Starting %s: %s...' "$DESC" $NAME 84.29 $DAEMON $OPTIONS 84.30 status 84.31 ;; 84.32 stop) 84.33 if ! active_pidfile $PIDFILE smartd ; then 84.34 - echo "$NAME is not running." 84.35 + _ '%s is not running.' $NAME 84.36 exit 1 84.37 fi 84.38 - echo -n "Stopping $DESC: $NAME... " 84.39 - kill `cat $PIDFILE` 84.40 + action 'Stopping %s: %s...' "$DESC" $NAME 84.41 + kill $(cat $PIDFILE) 84.42 status 84.43 ;; 84.44 restart) 84.45 if ! active_pidfile $PIDFILE smartd ; then 84.46 - echo "$NAME is not running." 84.47 + _ '%s is not running.' $NAME 84.48 exit 1 84.49 fi 84.50 - echo -n "Restarting $DESC: $NAME... " 84.51 - kill `cat $PIDFILE` 84.52 + action 'Restarting %s: %s...' "$DESC" $NAME 84.53 + kill $(cat $PIDFILE) 84.54 sleep 2 84.55 $DAEMON $OPTIONS 84.56 status 84.57 ;; 84.58 *) 84.59 - echo "" 84.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 84.61 - echo "" 84.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 84.63 + newline 84.64 exit 1 84.65 ;; 84.66 esac
85.1 --- a/squid/stuff/etc/init.d/squid Wed May 25 23:07:05 2016 +0200 85.2 +++ b/squid/stuff/etc/init.d/squid Thu May 26 20:16:45 2016 +0300 85.3 @@ -1,5 +1,5 @@ 85.4 #!/bin/sh 85.5 -# /etc/init.d/squid : Start, stop and restart Squid proxy server on SliTaz, at 85.6 +# /etc/init.d/squid : Start, stop and restart Squid proxy server on SliTaz, at 85.7 # boot time or with the command line. 85.8 # 85.9 # To start Squid proxy server at boot time, just put squid in the $RUN_DAEMONS 85.10 @@ -9,38 +9,38 @@ 85.11 . /etc/daemons.conf 85.12 85.13 NAME=Squid 85.14 -DESC="Squid proxy server" 85.15 +DESC="$(_ 'Squid proxy server')" 85.16 DAEMON=/usr/sbin/squid 85.17 OPTIONS=$SQUID_OPTIONS 85.18 PIDFILE=/var/run/squid.pid 85.19 -http_port=$(grep ^http_port /etc/squid/squid.conf | awk '{ print $2 }') 85.20 +http_port=$(grep ^http_port /etc/squid/squid.conf | awk '{print $2}') 85.21 [ -n "$http_port" ] || http_port=3128 85.22 [ -n "$OPTIONS" ] || OPTIONS="-a $http_port" 85.23 85.24 case "$1" in 85.25 start) 85.26 if active_pidfile $PIDFILE squid ; then 85.27 - echo "$NAME already running." 85.28 + _ '%s is already running.' $NAME 85.29 exit 1 85.30 fi 85.31 - cache_dir=$(grep ^cache_dir /etc/squid/squid.conf | awk '{ print $3 }') 85.32 + cache_dir=$(grep ^cache_dir /etc/squid/squid.conf | awk '{print $3}') 85.33 [ -n "$cache_dir" ] || cache_dir=/var/cache 85.34 if [ -d "$cache_dir" -a ! -d "$cache_dir/00" ]; then 85.35 - echo -n "Creating squid spool directory structure" 85.36 - $DAEMON -z > /dev/null 2>&1 85.37 + action 'Creating squid spool directory structure' 85.38 + $DAEMON -z >/dev/null 2>&1 85.39 status 85.40 fi 85.41 - echo -n "Starting $DESC: $NAME... " 85.42 + action 'Starting %s: %s...' "$DESC" $NAME 85.43 $DAEMON $OPTIONS 85.44 status 85.45 sleep 2 85.46 ;; 85.47 stop) 85.48 if ! active_pidfile $PIDFILE squid ; then 85.49 - echo "$NAME is not running." 85.50 + _ '%s is not running.' $NAME 85.51 exit 1 85.52 fi 85.53 - echo -n "Stopping $DESC: $NAME... " 85.54 + action 'Stopping %s: %s...' "$DESC" $NAME 85.55 $DAEMON -k kill 85.56 status 85.57 rm -f $PIDFILE 85.58 @@ -48,27 +48,26 @@ 85.59 ;; 85.60 reload) 85.61 if ! active_pidfile $PIDFILE squid ; then 85.62 - echo "$NAME is not running." 85.63 + _ '%s is not running.' $NAME 85.64 exit 1 85.65 fi 85.66 - echo -n "Reloading $DESC configuration... " 85.67 + action 'Reloading %s configuration...' $NAME 85.68 $DAEMON -k reconfigure 85.69 status 85.70 ;; 85.71 restart) 85.72 if ! active_pidfile $PIDFILE squid ; then 85.73 - echo "$NAME is not running." 85.74 + _ '%s is not running.' $NAME 85.75 exit 1 85.76 fi 85.77 - echo -n "Restarting $DESC: $NAME... " 85.78 - $DAEMON -k kill && $DAEMON $OPTIONS 85.79 + action 'Restarting %s: %s...' "$DESC" $NAME 85.80 + $DAEMON -k kill && $DAEMON $OPTIONS 85.81 status 85.82 sleep 2 85.83 ;; 85.84 *) 85.85 - echo "" 85.86 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|reload|restart]" 85.87 - echo "" 85.88 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart|reload]" 85.89 + newline 85.90 exit 1 85.91 ;; 85.92 esac
86.1 --- a/thttpd/stuff/etc/init.d/thttpd Wed May 25 23:07:05 2016 +0200 86.2 +++ b/thttpd/stuff/etc/init.d/thttpd Thu May 26 20:16:45 2016 +0300 86.3 @@ -1,5 +1,5 @@ 86.4 #!/bin/sh 86.5 -# /etc/init.d/thttpd : Start, stop and restart SSH server on SliTaz, at 86.6 +# /etc/init.d/thttpd : Start, stop and restart SSH server on SliTaz, at 86.7 # boot time or with the command line. 86.8 # 86.9 # To start SSH server at boot time, just put thttpd in the $RUN_DAEMONS 86.10 @@ -9,7 +9,7 @@ 86.11 . /etc/daemons.conf 86.12 86.13 NAME=thttpd 86.14 -DESC="Thttpd server" 86.15 +DESC="$(_ '%s server' thttpd)" 86.16 DAEMON=/usr/sbin/thttpd 86.17 CONFIG_FILE=/etc/thttpd/thttpd.conf 86.18 OPTIONS="-C $CONFIG_FILE -D" 86.19 @@ -18,37 +18,36 @@ 86.20 case "$1" in 86.21 start) 86.22 if active_pidfile $PIDFILE thttpd ; then 86.23 - echo "$NAME already running." 86.24 + _ '%s is already running.' $NAME 86.25 exit 1 86.26 fi 86.27 - echo -n "Starting $DESC: $NAME... " 86.28 + action 'Starting %s: %s...' "$DESC" $NAME 86.29 $DAEMON $OPTIONS 86.30 status 86.31 ;; 86.32 stop) 86.33 if ! active_pidfile $PIDFILE thttpd ; then 86.34 - echo "$NAME is not running." 86.35 + _ '%s is not running.' $NAME 86.36 exit 1 86.37 fi 86.38 - echo -n "Stopping $DESC: $NAME... " 86.39 - kill `cat $PIDFILE` 86.40 + action 'Stopping %s: %s...' "$DESC" $NAME 86.41 + kill $(cat $PIDFILE) 86.42 status 86.43 ;; 86.44 restart) 86.45 if ! active_pidfile $PIDFILE thttpd ; then 86.46 - echo "$NAME is not running." 86.47 + _ '%s is not running.' $NAME 86.48 exit 1 86.49 fi 86.50 - echo -n "Restarting $DESC: $NAME... " 86.51 - kill `cat $PIDFILE` 86.52 + action 'Restarting %s: %s...' "$DESC" $NAME 86.53 + kill $(cat $PIDFILE) 86.54 sleep 2 86.55 $DAEMON $OPTIONS 86.56 status 86.57 ;; 86.58 *) 86.59 - echo "" 86.60 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 86.61 - echo "" 86.62 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 86.63 + newline 86.64 exit 1 86.65 ;; 86.66 esac
87.1 --- a/tinc/stuff/etc/init.d/tinc Wed May 25 23:07:05 2016 +0200 87.2 +++ b/tinc/stuff/etc/init.d/tinc Thu May 26 20:16:45 2016 +0300 87.3 @@ -9,7 +9,7 @@ 87.4 . /etc/daemons.conf 87.5 87.6 NAME=tinc 87.7 -DESC="tinc deamon" 87.8 +DESC="$(_ '%s daemon' tinc)" 87.9 DAEMON=/usr/sbin/tincd 87.10 OPTIONS=$TINC_OPTIONS 87.11 PIDFILE=/var/run/tinc.pid 87.12 @@ -17,37 +17,36 @@ 87.13 case "$1" in 87.14 start) 87.15 if active_pidfile $PIDFILE tincd ; then 87.16 - echo "$NAME already running." 87.17 + _ '%s is already running.' $NAME 87.18 exit 1 87.19 fi 87.20 - echo -n "Starting $DESC: $NAME... " 87.21 - $DAEMON $OPTIONS 87.22 + action 'Starting %s: %s...' "$DESC" $NAME 87.23 + $DAEMON $OPTIONS 87.24 status 87.25 ;; 87.26 stop) 87.27 if ! active_pidfile $PIDFILE tincd ; then 87.28 - echo "$NAME is not running." 87.29 + _ '%s is not running.' $NAME 87.30 exit 1 87.31 fi 87.32 - echo -n "Stopping $DESC: $NAME... " 87.33 - $DAEMON -k 87.34 + action 'Stopping %s: %s...' "$DESC" $NAME 87.35 + $DAEMON -k 87.36 status 87.37 ;; 87.38 restart) 87.39 if ! active_pidfile $PIDFILE tincd ; then 87.40 - echo "$NAME is not running." 87.41 + _ '%s is not running.' 87.42 exit 1 87.43 fi 87.44 - echo -n "Restarting $DESC: $NAME... " 87.45 - $DAEMON -k 87.46 + action 'Restarting %s: %s...' "$DESC" $NAME 87.47 + $DAEMON -k 87.48 sleep 2 87.49 $DAEMON $OPTIONS 87.50 status 87.51 ;; 87.52 *) 87.53 - echo "" 87.54 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|reload|restart]" 87.55 - echo "" 87.56 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|reload|restart]" 87.57 + newline 87.58 exit 1 87.59 ;; 87.60 esac
88.1 --- a/tinyproxy/stuff/tinyproxy Wed May 25 23:07:05 2016 +0200 88.2 +++ b/tinyproxy/stuff/tinyproxy Thu May 26 20:16:45 2016 +0300 88.3 @@ -4,7 +4,7 @@ 88.4 . /etc/init.d/rc.functions 88.5 88.6 NAME=Tinyproxy 88.7 -DESC="Tiny Proxy" 88.8 +DESC="$(_ 'Tiny Proxy')" 88.9 DAEMON=/usr/sbin/tinyproxy 88.10 OPTION="-c" 88.11 PIDFILE=/var/run/tinyproxy.pid 88.12 @@ -12,29 +12,29 @@ 88.13 case "$1" in 88.14 start) 88.15 if active_pidfile $PIDFILE tinyproxy ; then 88.16 - echo "$NAME already running." 88.17 + _ '%s is already running.' $NAME 88.18 exit 1 88.19 fi 88.20 - echo -n "Starting $DESC: $NAME... " 88.21 + action 'Starting %s: %s...' "$DESC" $NAME 88.22 $DAEMON $OPTION /etc/tinyproxy/tinyproxy.conf 88.23 status 88.24 ;; 88.25 stop) 88.26 if ! active_pidfile $PIDFILE tinyproxy ; then 88.27 - echo "$NAME is not running." 88.28 + _ '%s is not running.' $NAME 88.29 exit 1 88.30 fi 88.31 - echo -n "Stopping $DESC: $NAME... " 88.32 + action 'Stopping %s: %s...' "$DESC" $NAME 88.33 killall tinyproxy 88.34 rm $PIDFILE 88.35 status 88.36 ;; 88.37 restart) 88.38 if ! active_pidfile $PIDFILE tinyproxy ; then 88.39 - echo "$NAME is not running." 88.40 + _ '%s is not running.' $NAME 88.41 exit 1 88.42 fi 88.43 - echo -n "Restarting $DESC: $NAME... " 88.44 + action 'Restarting %s: %s...' "$DESC" $NAME 88.45 killall tinyproxy 88.46 rm $PIDFILE 88.47 sleep 2 88.48 @@ -42,11 +42,10 @@ 88.49 status 88.50 ;; 88.51 *) 88.52 - echo "" 88.53 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 88.54 - echo "" 88.55 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 88.56 + newline 88.57 exit 1 88.58 ;; 88.59 esac 88.60 88.61 -exit 0 88.62 \ No newline at end of file 88.63 +exit 0
89.1 --- a/transmission-daemon/stuff/transmission-daemon Wed May 25 23:07:05 2016 +0200 89.2 +++ b/transmission-daemon/stuff/transmission-daemon Thu May 26 20:16:45 2016 +0300 89.3 @@ -9,7 +9,7 @@ 89.4 . /etc/daemons.conf 89.5 89.6 NAME=Transmission 89.7 -DESC="transmission daemon" 89.8 +DESC="$(_ '%s daemon' Transmission)" 89.9 DAEMON=/usr/bin/transmission-daemon 89.10 OPTIONS="-g /var/transmission-daemon/ -x /var/run/transmission-daemon.pid" 89.11 PIDFILE=/var/run/transmission-daemon.pid 89.12 @@ -17,29 +17,29 @@ 89.13 case "$1" in 89.14 start) 89.15 if active_pidfile $PIDFILE transmission-daemon ; then 89.16 - echo "$NAME already running." 89.17 + _ '%s is already running.' $NAME 89.18 exit 1 89.19 fi 89.20 - echo -n "Starting $DESC: $NAME... " 89.21 - $DAEMON $OPTIONS 89.22 + action 'Starting %s: %s...' "$DESC" $NAME 89.23 + $DAEMON $OPTIONS 89.24 status 89.25 ;; 89.26 stop) 89.27 if ! active_pidfile $PIDFILE transmission-daemon ; then 89.28 - echo "$NAME is not running." 89.29 + _ '%s is not running.' $NAME 89.30 exit 1 89.31 fi 89.32 - echo -n "Stopping $DESC: $NAME... " 89.33 + action 'Stopping %s: %s...' "$DESC" $NAME 89.34 killall transmission-daemon 89.35 rm $PIDFILE 89.36 status 89.37 ;; 89.38 restart) 89.39 if ! active_pidfile $PIDFILE transmission-daemon ; then 89.40 - echo "$NAME is not running." 89.41 + _ '%s is not running.' $NAME 89.42 exit 1 89.43 fi 89.44 - echo -n "Restarting $DESC: $NAME... " 89.45 + action 'Restarting %s: %s...' "$DESC" $NAME 89.46 killall transmission-daemon 89.47 rm $PIDFILE 89.48 sleep 2 89.49 @@ -47,9 +47,8 @@ 89.50 status 89.51 ;; 89.52 *) 89.53 - echo "" 89.54 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 89.55 - echo "" 89.56 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 89.57 + newline 89.58 exit 1 89.59 ;; 89.60 esac
90.1 --- a/unfs3/stuff/etc/init.d/unfsd Wed May 25 23:07:05 2016 +0200 90.2 +++ b/unfs3/stuff/etc/init.d/unfsd Thu May 26 20:16:45 2016 +0300 90.3 @@ -9,7 +9,7 @@ 90.4 . /etc/daemons.conf 90.5 90.6 NAME=unfsd 90.7 -DESC="NFSv3 Server" 90.8 +DESC="$(_ '%s server' NFSv3)" 90.9 DAEMON=/usr/bin/unfsd 90.10 OPTIONS= 90.11 PIDFILE=/var/run/$NAME.pid 90.12 @@ -18,40 +18,40 @@ 90.13 test -f $DAEMON || exit 0 90.14 90.15 case "$1" in 90.16 - start) 90.17 - if active_pidfile $PIDFILE unfsd ; then 90.18 - echo "$NAME already running." 90.19 - exit 1 90.20 - fi 90.21 + start) 90.22 + if active_pidfile $PIDFILE unfsd ; then 90.23 + _ '%s is already running.' $NAME 90.24 + exit 1 90.25 + fi 90.26 90.27 - echo -n "Starting $DESC: $NAME... " 90.28 - $DAEMON $OPTIONS 90.29 - status 90.30 - 90.31 - # registering PID 90.32 - if [ $? -eq 0 ]; then 90.33 - pidof -s $NAME > $PIDFILE 90.34 - fi 90.35 - ;; 90.36 - stop) 90.37 - if ! active_pidfile $PIDFILE unfsd ; then 90.38 - echo "$NAME is not running." 90.39 - exit 1 90.40 - fi 90.41 - echo -n "Stopping $DESC: $NAME... " 90.42 - kill `cat $PIDFILE` 90.43 - rm -f $PIDFILE 90.44 - status 90.45 - ;; 90.46 - restart) 90.47 - $0 stop 90.48 - $0 start 90.49 - ;; 90.50 - *) 90.51 - echo "Usage: $DAEMON {start|stop|reload|restart}" 90.52 - exit 1 90.53 - ;; 90.54 + action 'Starting %s: %s...' "$DESC" $NAME 90.55 + $DAEMON $OPTIONS 90.56 + status 90.57 + 90.58 + # registering PID 90.59 + if [ $? -eq 0 ]; then 90.60 + pidof -s $NAME > $PIDFILE 90.61 + fi 90.62 + ;; 90.63 + stop) 90.64 + if ! active_pidfile $PIDFILE unfsd ; then 90.65 + _ '%s is not running.' $NAME 90.66 + exit 1 90.67 + fi 90.68 + action 'Stopping %s: %s...' "$DESC" $NAME 90.69 + kill $(cat $PIDFILE) 90.70 + rm -f $PIDFILE 90.71 + status 90.72 + ;; 90.73 + restart) 90.74 + $0 stop 90.75 + $0 start 90.76 + ;; 90.77 + *) 90.78 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 90.79 + newline 90.80 + exit 1 90.81 + ;; 90.82 esac 90.83 90.84 exit 0 90.85 -
91.1 --- a/virtualbox-ose-guestutils/stuff/VBoxService Wed May 25 23:07:05 2016 +0200 91.2 +++ b/virtualbox-ose-guestutils/stuff/VBoxService Thu May 26 20:16:45 2016 +0300 91.3 @@ -7,7 +7,7 @@ 91.4 . /etc/daemons.conf 91.5 91.6 NAME=VBoxService 91.7 -DESC="VirtualBox Guest Service" 91.8 +DESC="$(_ 'VirtualBox Guest Service')" 91.9 DAEMON=/usr/bin/VBoxService 91.10 OPTIONS=$VBOXSERVICE_OPTIONS 91.11 PIDFILE=/var/run/VBoxService.pid 91.12 @@ -15,37 +15,36 @@ 91.13 case "$1" in 91.14 start) 91.15 if active_pidfile $PIDFILE VBoxService ; then 91.16 - echo "$NAME already running." 91.17 + _ '%s is already running.' $NAME 91.18 exit 1 91.19 fi 91.20 - echo -n "Starting $DESC: $NAME... " 91.21 + action 'Starting %s: %s...' "$DESC" $NAME 91.22 mkdir -p $(dirname $PIDFILE) 91.23 $DAEMON $OPTIONS 91.24 status ;; 91.25 stop) 91.26 if ! active_pidfile $PIDFILE VBoxService ; then 91.27 - echo "$NAME is not running." 91.28 + _ '%s is not running.' 91.29 exit 1 91.30 fi 91.31 - echo -n "Stopping $DESC: $NAME... " 91.32 + action 'Stopping %s: %s...' "$DESC" $NAME 91.33 kill $(cat $PIDFILE) 91.34 rm $PIDFILE 91.35 status ;; 91.36 restart) 91.37 if ! active_pidfile $PIDFILE VBoxService ; then 91.38 - echo "$NAME is not running." 91.39 + _ '%s is not running.' $NAME 91.40 exit 1 91.41 fi 91.42 - echo -n "Restarting $DESC: $NAME... " 91.43 + action 'Restarting %s: %s...' "$DESC" $NAME 91.44 kill $(cat $PIDFILE) 91.45 rm $PIDFILE 91.46 sleep 2 91.47 $DAEMON $OPTIONS 91.48 status ;; 91.49 *) 91.50 - echo "" 91.51 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 91.52 - echo "" 91.53 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 91.54 + newline 91.55 exit 1 ;; 91.56 esac 91.57
92.1 --- a/wicd/stuff/wicd Wed May 25 23:07:05 2016 +0200 92.2 +++ b/wicd/stuff/wicd Thu May 26 20:16:45 2016 +0300 92.3 @@ -9,7 +9,7 @@ 92.4 . /etc/daemons.conf 92.5 92.6 NAME=Wicd 92.7 -DESC="Network connection manager" 92.8 +DESC="$(_ 'Network connection manager')" 92.9 DAEMON=/usr/sbin/wicd 92.10 OPTIONS=$WICD_OPTIONS 92.11 PIDFILE=/var/run/wicd/wicd.pid 92.12 @@ -17,39 +17,38 @@ 92.13 case "$1" in 92.14 start) 92.15 if active_pidfile $PIDFILE wicd ; then 92.16 - echo "$NAME already running." 92.17 + _ '%s is already running.' $NAME 92.18 exit 1 92.19 fi 92.20 - echo -n "Starting $DESC: $NAME... " 92.21 - $DAEMON $OPTIONS 92.22 + action 'Starting %s: %s...' "$DESC" $NAME 92.23 + $DAEMON $OPTIONS 92.24 status 92.25 ;; 92.26 stop) 92.27 if ! active_pidfile $PIDFILE wicd ; then 92.28 - echo "$NAME is not running." 92.29 + _ '%s is not running.' $NAME 92.30 exit 1 92.31 fi 92.32 - echo -n "Stopping $DESC: $NAME... " 92.33 - kill `cat $PIDFILE` 92.34 + action 'Stopping %s: %s...' "$DESC" $NAME 92.35 + kill $(cat $PIDFILE) 92.36 rm -f $PIDFILE 92.37 status 92.38 ;; 92.39 restart) 92.40 if ! active_pidfile $PIDFILE wicd ; then 92.41 - echo "$NAME is not running." 92.42 + _ '%s is not running.' $NAME 92.43 exit 1 92.44 fi 92.45 - echo -n "Restarting $DESC: $NAME... " 92.46 - kill `cat $PIDFILE` 92.47 + action 'Restarting %s: %s...' "$DESC" $NAME 92.48 + kill $(cat $PIDFILE) 92.49 rm -f $PIDFILE 92.50 sleep 2 92.51 $DAEMON $OPTIONS 92.52 status 92.53 ;; 92.54 *) 92.55 - echo "" 92.56 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 92.57 - echo "" 92.58 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 92.59 + newline 92.60 exit 1 92.61 ;; 92.62 esac
93.1 --- a/wpa_supplicant/stuff/etc/init.d/wpa_supplicant Wed May 25 23:07:05 2016 +0200 93.2 +++ b/wpa_supplicant/stuff/etc/init.d/wpa_supplicant Thu May 26 20:16:45 2016 +0300 93.3 @@ -9,7 +9,7 @@ 93.4 . /etc/daemons.conf 93.5 93.6 NAME=wpa_supplicant 93.7 -DESC="wpa_supplicant deamon" 93.8 +DESC="$(_ '%s daemon' wpa_supplicant)" 93.9 DAEMON=/usr/bin/wpa_supplicant 93.10 OPTIONS=$WPA_OPTIONS 93.11 PIDFILE=/var/run/wpa_supplicant.pid 93.12 @@ -17,37 +17,36 @@ 93.13 case "$1" in 93.14 start) 93.15 if active_pidfile $PIDFILE $NAME ; then 93.16 - echo "$NAME already running." 93.17 + _ '%s is already running.' $NAME 93.18 exit 1 93.19 fi 93.20 - echo -n "Starting $DESC: $NAME... " 93.21 - $DAEMON $OPTIONS 93.22 + action 'Starting %s: %s...' "$DESC" $NAME 93.23 + $DAEMON $OPTIONS 93.24 status 93.25 ;; 93.26 stop) 93.27 if ! active_pidfile $PIDFILE $NAME ; then 93.28 - echo "$NAME is not running." 93.29 + _ '%s is not running.' $NAME 93.30 exit 1 93.31 fi 93.32 - echo -n "Stopping $DESC: $NAME... " 93.33 - kill `cat $PIDFILE` 93.34 + action 'Stopping %s: %s...' "$DESC" $NAME 93.35 + kill $(cat $PIDFILE) 93.36 status 93.37 ;; 93.38 restart) 93.39 if ! active_pidfile $PIDFILE $NAME ; then 93.40 - echo "$NAME is not running." 93.41 + _ '%s is not running.' $NAME 93.42 exit 1 93.43 fi 93.44 - echo -n "Restarting $DESC: $NAME... " 93.45 - kill `cat $PIDFILE` 93.46 + action 'Restarting %s: %s...' "$DESC" $NAME 93.47 + kill $(cat $PIDFILE) 93.48 sleep 2 93.49 $DAEMON $OPTIONS 93.50 status 93.51 ;; 93.52 *) 93.53 - echo "" 93.54 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 93.55 - echo "" 93.56 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 93.57 + newline 93.58 exit 1 93.59 ;; 93.60 esac
94.1 --- a/x11vnc/stuff/x11vnc Wed May 25 23:07:05 2016 +0200 94.2 +++ b/x11vnc/stuff/x11vnc Thu May 26 20:16:45 2016 +0300 94.3 @@ -1,5 +1,5 @@ 94.4 #!/bin/sh 94.5 -# /etc/init.d/x11vnc: Start, stop and restart web server on SliTaz, 94.6 +# /etc/init.d/x11vnc: Start, stop and restart web server on SliTaz, 94.7 # at boot time or with the command line. Daemons options are configured 94.8 # with /etc/daemons.conf 94.9 # 94.10 @@ -7,44 +7,43 @@ 94.11 . /etc/daemons.conf 94.12 94.13 NAME=x11vnc 94.14 -DESC="VNC server" 94.15 +DESC="$(_ '%s server' VNC)" 94.16 DAEMON=/usr/bin/x11vnc 94.17 OPTIONS=$X11VNC_OPTIONS 94.18 94.19 case "$1" in 94.20 start) 94.21 if ps x | grep -v grep | grep -q $DAEMON; then 94.22 - echo "$NAME already running." 94.23 + _ '%s is already running.' $NAME 94.24 exit 1 94.25 fi 94.26 - echo -n "Starting $DESC: $NAME... " 94.27 + action 'Starting %s: %s...' "$DESC" $NAME 94.28 $DAEMON $OPTIONS & 94.29 status 94.30 ;; 94.31 stop) 94.32 if ! ps x | grep -v grep | grep -q $DAEMON; then 94.33 - echo "$NAME is not running." 94.34 + _ '%s is not running.' $NAME 94.35 exit 1 94.36 fi 94.37 - echo -n "Stopping $DESC: $NAME... " 94.38 + action 'Stopping %s: %s...' "$DESC" $NAME 94.39 killall $(basename $DAEMON) 94.40 status 94.41 ;; 94.42 restart) 94.43 if ! ps x | grep -v grep | grep -q $DAEMON; then 94.44 - echo "$NAME is not running." 94.45 + _ '%s is not running.' $NAME 94.46 exit 1 94.47 fi 94.48 - echo -n "Restarting $DESC: $NAME... " 94.49 + action 'Restarting %s: %s...' "$DESC" $NAME 94.50 killall $(basename $DAEMON) 94.51 sleep 2 94.52 $DAEMON $OPTIONS & 94.53 status 94.54 ;; 94.55 *) 94.56 - echo "" 94.57 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 94.58 - echo "" 94.59 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 94.60 + newline 94.61 exit 1 94.62 ;; 94.63 esac
95.1 --- a/ypserv/stuff/ypserv Wed May 25 23:07:05 2016 +0200 95.2 +++ b/ypserv/stuff/ypserv Thu May 26 20:16:45 2016 +0300 95.3 @@ -1,5 +1,5 @@ 95.4 #!/bin/sh 95.5 -# /etc/init.d/ypserv: Start, stop and restart YP (NIS) Server on SliTaz, at 95.6 +# /etc/init.d/ypserv: Start, stop and restart YP (NIS) Server on SliTaz, at 95.7 # boot time or with the command line. 95.8 # 95.9 # To start YP (NIS) Server at boot time, just put ypserver in the $RUN_DAEMONS 95.10 @@ -9,7 +9,7 @@ 95.11 . /etc/daemons.conf 95.12 95.13 NAME=ypserv 95.14 -DESC="YP (NIS) Server" 95.15 +DESC="$(_ '%s server' 'YP (NIS)')" 95.16 DAEMON=/usr/sbin/ypserv 95.17 OPTIONS=$YPSERV_OPTIONS 95.18 PIDFILE=/var/run/ypserv.pid 95.19 @@ -17,38 +17,37 @@ 95.20 case "$1" in 95.21 start) 95.22 if active_pidfile $PIDFILE ypserv ; then 95.23 - echo "$NAME already running." 95.24 + _ '%s is already running.' $NAME 95.25 exit 1 95.26 fi 95.27 - echo -n "Starting $DESC: $NAME... " 95.28 + action 'Starting %s: %s...' "$DESC" $NAME 95.29 $DAEMON $OPTIONS 95.30 - echo "$(pidof ypserv)" > $PIDFILE 95.31 + pidof ypserv > $PIDFILE 95.32 status 95.33 ;; 95.34 stop) 95.35 if ! active_pidfile $PIDFILE ypserv ; then 95.36 - echo "$NAME is not running." 95.37 + _ '%s is not running.' $NAME 95.38 exit 1 95.39 fi 95.40 - echo -n "Stopping $DESC: $NAME... " 95.41 - kill `cat $PIDFILE` 95.42 + action 'Stopping %s: %s...' "$DESC" $NAME 95.43 + kill $(cat $PIDFILE) 95.44 status 95.45 ;; 95.46 restart) 95.47 if ! active_pidfile $PIDFILE ypserv ; then 95.48 - echo "$NAME is not running." 95.49 + _ '%s is not running.' 95.50 exit 1 95.51 fi 95.52 - echo -n "Restarting $DESC: $NAME... " 95.53 - kill `cat $PIDFILE` 95.54 + action 'Restarting %s: %s...' "$DESC" $NAME 95.55 + kill $(cat $PIDFILE) 95.56 sleep 2 95.57 $DAEMON $OPTIONS 95.58 status 95.59 ;; 95.60 *) 95.61 - echo "" 95.62 - echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 95.63 - echo "" 95.64 + emsg "<n><b>$(_ 'Usage:')</b> $0 [start|stop|restart]" 95.65 + newline 95.66 exit 1 95.67 ;; 95.68 esac