wok-current annotate syslinux/stuff/iso2exe/taziso @ rev 21553

syslinux/iso2exe,taziso: add slitaz.pif
author Pascal Bellard <pascal.bellard@slitaz.org>
date Fri May 10 19:27:17 2019 +0200 (2019-05-10)
parents 95dd63067f99
children e93e6b4d565f
rev   line source
pascal@17635 1 #!/bin/sh
pascal@17635 2
pascal@17635 3 [ $(id -u) -eq 0 ] || exec su -c "$0 $@"
pascal@17635 4
pascal@17635 5 DIALOG=dialog
pascal@17635 6
pascal@17635 7 ddq()
pascal@17635 8 {
pascal@17635 9 dd $@ 2> /dev/null
pascal@17635 10 }
pascal@17635 11
pascal@17635 12 get()
pascal@17635 13 {
pascal@18670 14 od -v -j $1 -N ${4:-${3:-2}} -t u${3:-2} -w${3:-2} -An "$2" 2>/dev/null ||
pascal@21542 15 hexdump -v -s $1 -n ${4:-${3:-2}} -e "\"\" 1/${3:-2} \" %u\n\"" "$2"
pascal@17635 16 }
pascal@17635 17
pascal@17635 18 bytes2bin()
pascal@17635 19 {
pascal@17635 20 for i in $@ ; do
pascal@17635 21 printf '\\\\x%02X' $(($i&255))
pascal@17635 22 done | xargs echo -en
pascal@17635 23 }
pascal@17635 24
pascal@17635 25 words2bin()
pascal@17635 26 {
pascal@17635 27 for i in $@ ; do
pascal@17635 28 printf '\\\\x%02X\\\\x%02X' $(($i&255)) $((($i>>8)&255))
pascal@17635 29 done | xargs echo -en
pascal@17635 30 }
pascal@17635 31
pascal@17635 32 gettazboot()
pascal@17635 33 {
pascal@21542 34 echo -e "\nCreating $(basename $1) ..."
pascal@21542 35 X=$(($(get 20 /mnt/$ISO) - 0xC0))
pascal@21542 36 [ $X -lt 30000 ] && X=$((0x7FF0))
pascal@18670 37 O=$(($(get 64 "$ISO") - 0xC0))
pascal@21542 38 L=$(($X - $(get 24 "$ISO") - $O))
pascal@18140 39 S=$((32+$L))
pascal@18140 40 P=$((($S+511)/512))
pascal@18140 41 E=$((4096-(32*$P)))
pascal@18140 42 words2bin 0x5A4D $(($S%512)) $P 0 2 $E -1 $((${2:-0}-16)) \
pascal@18140 43 -2 0 256 -16 28 0x6C53 0x5469 0x7A61 > $1
pascal@21542 44 ddq bs=1 count=$(echo $L) skip=$(echo $O) if="$ISO" >> $1
pascal@17635 45 }
pascal@17635 46
pascal@17635 47 uncpio()
pascal@17635 48 {
pascal@17635 49 [ -s "$1" ] || return
pascal@17635 50 echo -en "\n Extracting $(basename $1) ..."
pascal@17635 51 case $(get 0 $1) in
pascal@17635 52 *35615) ( zcat || gunzip ) ;;
pascal@17635 53 *14333) unxz ;;
pascal@17635 54 *\ 93) unlzma ;;
pascal@17635 55 *) cat ;;
pascal@17635 56 esac < $1 | ( cd ${2:-/} ; cpio -idmu > /dev/null 2>&1 )
pascal@17635 57 }
pascal@17635 58
pascal@17635 59 dotwait()
pascal@17635 60 {
pascal@17635 61 echo -n "${1:-Install filesystem}.."
pascal@17635 62 touch /tmp/wait
pascal@17930 63 [ "$REQUEST_URI" ] && return
pascal@17635 64 while [ -e /tmp/wait ]; do
pascal@17635 65 echo -n "." > /dev/tty
pascal@17635 66 sleep 1
pascal@17635 67 done &
pascal@17635 68 }
pascal@17635 69
pascal@17635 70 getuuid()
pascal@17635 71 {
pascal@17635 72 dev=$(mount | sed "/ $(echo $mnt | sed 's|/|\\/|g') /!d;s/ .*//;s|/dev/||;q")
pascal@17635 73 [ "$dev" ] &&
pascal@17635 74 blkid | sed "/$dev:/!d;s/.* UUID=.\\([^ ]*\\)\".*/\\1/" ||
pascal@17635 75 echo "/dev/hda1"
pascal@17635 76 }
pascal@17635 77
pascal@17635 78 tazusbinitfs()
pascal@17635 79 {
pascal@17635 80 PAD=$(($(stat -c %s $1) % 4))
pascal@17635 81 [ $PAD -ne 0 ] && ddq if=/dev/zero bs=1 count=$((4 - $PAD)) >> $1
pascal@17635 82 mkdir -p /tmp/fs$$/etc /tmp/fs$$/lib /tmp/fs$$/home
pascal@21542 83 cp -a /etc/locale.conf /etc/locale.conf /tmp/fs$$/etc 2> /dev/null
pascal@17635 84 cat > /tmp/fs$$/init1 <<EOT
pascal@17635 85 #!/bin/sh
pascal@17635 86 sed -i 's|sbin/init|init2|' /init
pascal@17635 87 exec /init
pascal@17635 88 EOT
pascal@17635 89 cat > /tmp/fs$$/init2 <<EOT
pascal@17635 90 #!/bin/sh
pascal@17635 91
pascal@17635 92 mount -t proc /proc /proc
pascal@21542 93 for i in /lib/modules/*.ko* ; do insmod \$i 2> /dev/null ; done; sleep 2
pascal@17635 94 v=\$(sed '/\\/home=/!d;s|.*/home=\\([^ ]*\\).*|\\1|' /proc/cmdline /cmdline 2> /dev/null)
pascal@17635 95 mount / -o remount,rw
pascal@17635 96 mkdir /mnt/dos
pascal@17635 97 rm -f /cmdline 2> /dev/null
pascal@17635 98 mount / -o remount,ro
pascal@17635 99 mnt=/mnt/dos/\${v#*/}
pascal@17635 100 dev=\$( (blkid /dev/[sh]d* || blkid) | grep \${v%%/*} | sed 's/:.*//;q')
pascal@17635 101 echo "Mount \$dev in /mnt/dos for \$v..." | tee -a /run/boot.log
pascal@17635 102 mount \$dev /mnt/dos
pascal@17635 103 if [ ! -d /mnt/dos/slitaz ]; then
pascal@17635 104 umount /mnt/dos 2> /dev/null
pascal@17635 105 (blkid /dev/[sh]d* || blkid) | while read dev line; do
pascal@17635 106 case "\$line" in
pascal@17635 107 *ntfs*|*vfat*|*msdos*) ;;
pascal@17635 108 *) continue ;;
pascal@17635 109 esac
pascal@17635 110 mount \${dev%:} /mnt/dos
pascal@17635 111 [ -d /mnt/dos/slitaz ] && break
pascal@17635 112 umount /mnt/dos
pascal@17635 113 done
pascal@17635 114 fi
pascal@17932 115 $([ "$2" ] || echo '# ')mount.posixovl -F \$mnt -- -oallow_other -odefault_permissions -osuid
pascal@17635 116 mount --bind \$mnt /home
pascal@21542 117 mount -o size=0,ro -t tmpfs tmpfs \$mnt
pascal@17635 118 umount /proc
pascal@17635 119 exec /sbin/init
pascal@17635 120 EOT
pascal@17635 121 chmod 755 /tmp/fs$$/init?
pascal@21542 122 ln -s /sqfs/bin/gzip /bin 2> /dev/null
pascal@17635 123 ( cd /tmp/fs$$ ; find * | cpio -o -H newc ) | gzip -9 >> $1
pascal@17635 124 rm -rf /tmp/fs$$
pascal@17635 125 }
pascal@17635 126
pascal@17635 127 mkinitrd()
pascal@17635 128 {
pascal@17635 129 echo -en "\nCreating $(basename $1) "
pascal@17635 130 fs=/tmp/fs$$
pascal@17635 131 for i in bin lib dev proc tmp mnt etc ; do
pascal@17635 132 mkdir -p $fs/$i
pascal@17635 133 done
pascal@21542 134 for i in /dev/null /dev/tty /dev/tty[012] /dev/fuse /dev/[hs]d* \
pascal@21542 135 /dev/console ; do
pascal@17635 136 cp -a $2$i $fs/dev/
pascal@17635 137 done
pascal@17635 138 for i in /bin/busybox $(which mount.posixovl) $(which blkid); do
pascal@17635 139 cp $(LD_TRACE_LOADED_OBJECTS=1 /lib/ld*.so $i | \
pascal@17635 140 sed 's|.*=> \(.*/lib/l[^ ]*\).*|\1|;/^\//!d') $fs/lib
pascal@17635 141 cp $i $fs/bin
pascal@17635 142 done
pascal@21542 143 cp -a /sqfs/lib/ld-* /tmp/fs/lib 2> /dev/null ||
pascal@17635 144 cp -a /lib/ld-* $fs/lib
pascal@17635 145 for i in $(busybox | sed '/Current/,$!d'); do
pascal@17635 146 [ -e $fs/bin/${i%,} ] || ln -s busybox $fs/bin/${i%,}
pascal@17635 147 done
pascal@17635 148 ln -s /proc/mounts $fs/etc/mtab
pascal@17635 149 sed 's/ .*//' /proc/modules | while read mod ; do
pascal@17635 150 find /lib/modules/ | grep $mod.ko | \
pascal@17635 151 sed 's|.*|cp & $fs/lib|' | sh
pascal@17635 152 done
pascal@17635 153 cat > $fs/init <<EOT
pascal@17635 154 #!/bin/sh
pascal@17635 155
pascal@17635 156 arg()
pascal@17635 157 {
pascal@17635 158 grep -q \$1 /proc/cmdline &&
pascal@17635 159 val="\$(sed "s/.*\$1=\\([^ ]*\\).*/\\1/" < /proc/cmdline)" &&
pascal@17635 160 echo "\$2 \$val"
pascal@17635 161 }
pascal@17635 162
pascal@17635 163 mount -t proc /proc /proc
pascal@17635 164 arg debug "shell" && debug=true && set -x
pascal@17635 165 for i in /lib/*.ko* ; do insmod \$i 2> /dev/null ; done; sleep 2
pascal@17635 166 arg mount "Mount device"
pascal@17635 167 mount \$( (blkid /dev/[sh]d* || blkid) | grep \$val | sed 's/:.*//;q') /mnt
pascal@17635 168 arg subroot "Change root to directory"
pascal@17635 169 if [ -d /mnt/\$val ]; then
pascal@17635 170 umount /mnt 2> /dev/null
pascal@17635 171 (blkid /dev/[sh]d* || blkid) | while read dev line; do
pascal@17635 172 case "\$line" in
pascal@17635 173 *ntfs*|*vfat*|*msdos*) ;;
pascal@17635 174 *) continue ;;
pascal@17635 175 esac
pascal@17635 176 mount \${dev%:} /mnt
pascal@17635 177 [ -d /mnt/\$val ] && break
pascal@17635 178 umount /mnt
pascal@17635 179 done
pascal@17635 180 fi
pascal@17932 181 $([ "$3" ] || echo '# ')mount.posixovl -F /mnt/\$val -- -oallow_other -odefault_permissions -osuid
pascal@17635 182 mount --bind /mnt /mnt/\$val/mnt/dos
pascal@21542 183 mount -o size=0,ro -t tmpfs tmpfs /mnt/\$val/mnt/dos/\$val
pascal@17635 184 LDSO=\$(ls /mnt/\$val/lib/ld-* | sed q)
pascal@17635 185 export LD_LIBRARY_PATH=\$val/lib:\$val/usr/lib:/lib
pascal@17635 186 [ "$debug" = "true" ] && sh
pascal@17635 187 umount /proc
pascal@17635 188 exec /bin/switch_root /mnt \${LDSO#/mnt/} \$val/usr/sbin/chroot \$val /sbin/init
pascal@17635 189 EOT
pascal@17635 190 chmod +x $fs/init
pascal@17635 191 ( cd $fs ; find * | cpio -o -H newc ) | lzma e $1 -si 2> /dev/null
pascal@17635 192 rm -rf $fs /tmp/wait
pascal@17635 193 }
pascal@17635 194
pascal@17635 195 ls_r()
pascal@17635 196 {
pascal@17635 197 ls -r $@ 2> /dev/null || ls $@
pascal@17635 198 }
pascal@17635 199
pascal@17635 200 doinstall()
pascal@17635 201 {
pascal@17932 202 unset useposixovl
pascal@17934 203 blkid | grep $(df $mnt | sed '$!d;s/ .*/:/') | \
pascal@17932 204 grep -qiE "(msdos|vfat|ntfs)" && useposixovl=YES
pascal@19029 205 case "$mnt" in
pascal@19029 206 *mkzip*) useposixovl=YES
pascal@19029 207 esac
pascal@17635 208 mkdir -p $mnt/slitaz/boot $mnt/slitaz/mnt/dos
pascal@17932 209 [ "$useposixovl" ] &&
pascal@17635 210 if ! mount.posixovl -F $mnt/slitaz -- \
pascal@17635 211 -oallow_other -odefault_permissions -osuid; then
pascal@17635 212 echo "Can't install SliTaz. Abort."
pascal@17635 213 sleep 5
pascal@17635 214 return 1
pascal@17635 215 fi
pascal@17635 216 dotwait "Install root filesystem in /slitaz.."
pascal@17635 217 if [ "$1" ]; then
pascal@18240 218 ls_r $media/boot/rootfs*gz | \
pascal@17635 219 xargs cat > $mnt/slitaz/boot/rootfs.gz
pascal@17932 220 tazusbinitfs $mnt/slitaz/boot/rootfs.gz $useposixovl
pascal@17635 221 initrd=rootfs.gz
pascal@17635 222 extraargs="/home=$(getuuid)/slitaz rdinit=/init1"
pascal@17635 223 else
pascal@18240 224 for i in $(ls_r $media/boot/rootfs*gz); do
pascal@17635 225 uncpio $i $mnt/slitaz
pascal@17635 226 done
pascal@17635 227 for i in $packages_list; do
pascal@17635 228 tazpkg get-install $i --root=$mnt/slitaz
pascal@17635 229 done
pascal@17635 230 for i in $packages_dir/*.tazpkg; do
pascal@17635 231 [ -s "$i" ] &&
pascal@17635 232 tazpkg install $i --root=$mnt/slitaz
pascal@17635 233 done
pascal@17635 234 cp -a /etc/locale.conf $mnt/slitaz/etc 2> /dev/null
pascal@17635 235 cp -a /etc/keymap.conf $mnt/slitaz/etc 2> /dev/null
pascal@17932 236 mkinitrd $mnt/slitaz/boot/initrd $mnt/slitaz $useposixovl
pascal@17635 237 initrd=initrd
pascal@17635 238 extraargs="mount=$(getuuid) subroot=slitaz"
pascal@17635 239 fi
pascal@17635 240 echo -en "\nInstall boot files..."
pascal@20158 241 for i in $media/boot/bzImage* $media/boot/*pxe* \
pascal@18240 242 $media/boot/isolinux/he* $media/boot/isolinux/opt* \
pascal@18240 243 $media/README $media/boot/memtest* ; do
pascal@17635 244 [ -s $i ] && cp $i $mnt/slitaz/boot
pascal@17635 245 done
pascal@21542 246 for i in $mnt/slitaz/boot/memtest $mnt/slitaz/boot/*pxe ; do
pascal@17635 247 [ $(get 0 $i 2> /dev/null || echo 0) -eq 23117 ] &&
pascal@17635 248 mv $i $i.exe
pascal@17635 249 done
pascal@20158 250 bzimage=$(cd $mnt/slitaz/boot ; ls bzimage*)
pascal@21542 251 cp /etc/keymap.conf /etc/locale.conf $mnt/slitaz/etc 2> /dev/null
pascal@20158 252 gettazboot $mnt/slitaz/boot/tazboot.exe # autoappend 64 suffix
pascal@17635 253 unix2dos > $mnt/slitaz/boot/tazboot.cmd <<EOT
pascal@17635 254 kernel=/slitaz/boot/bzimage
pascal@17635 255 initrd=/slitaz/boot/$initrd
pascal@17635 256 rw root=/dev/null $extraargs autologin
pascal@17635 257 EOT
pascal@21553 258 uudecode - <<EOT | gunzip > $mnt/slitaz/boot/slitaz.pif
pascal@21553 259 begin-base64 644 -
pascal@21553 260 H4sIAAAAAAACA8XPxUHGMBTA8X9ecb/glgFwv+FO23zeI+7ucMFhCjZgEEZh
pascal@21553 261 Ctzd4Rf3PFbtQHGLG9BmfmZqdlE/tSmw2LfePzOzWDK0OsQXpPHvFGfZBmL5
pascal@21553 262 f3Zns98NuG1BbTrbWj0OFMypSKfT4kYCurKuRleWlBEth2qUTYFBKjg746pI
pascal@21553 263 2nZaIT/v9vWwbeuqi9fPznLlSPFLLuK22/0lLT09/BDhXgWKO1f9aLKxOObE
pascal@21553 264 EhLuVvO4FksSwaH5qbHpvkle0TyzND82NK+doRVeZgGGbIw0XD2QwV9SnAN/
pascal@21553 265 ACxDxwMAAA==
pascal@21553 266 ====
pascal@21553 267 EOT
pascal@17635 268 unix2dos $mnt/slitaz/boot/he* $mnt/slitaz/boot/opt* \
pascal@17635 269 $mnt/slitaz/boot/README
pascal@17635 270 [ -d $mnt/slitaz/usr/sbin -a ! -x $mnt/slitaz/usr/sbin/mount.posixovl ] &&
pascal@17635 271 cp $(which mount.posixovl) $mnt/slitaz/usr/sbin
pascal@19033 272 if [ "$useposixovl" ] && grep -qs " $mnt " /proc/mounts &&
pascal@17932 273 [ ! -d $mnt/boot/grub ]; then
pascal@17929 274 mkdir -p $mnt/boot/grub
pascal@17930 275 echo -en "\nInstall grub in /boot/grub..."
pascal@17929 276 cp -a /usr/lib/grub/*/* $mnt/boot/grub
pascal@17929 277 cat > $mnt/boot/grub/menu.lst <<EOT
pascal@17929 278 # /boot/grub/menu.lst: GRUB boot loader configuration.
pascal@17929 279
pascal@17929 280 # By default, boot the first entry.
pascal@17929 281 default 0
pascal@17929 282
pascal@17929 283 # Boot automatically after 8 secs.
pascal@17929 284 timeout 8
pascal@17929 285
pascal@17929 286 title Microsoft Windows
pascal@17929 287 chainloader +1
pascal@17929 288
pascal@17929 289 EOT
pascal@17929 290 dev=$(grep " $mnt " /proc/mounts | awk '{ print $1 }')
pascal@17929 291 base=${dev//[0-9]/}
pascal@17929 292 dd if=$base bs=32k count=1 of=$mnt/boot/grub/$(basename $base)
pascal@17929 293 cat > $mnt/boot/grub/uninstall-grub.sh <<EOT
pascal@17929 294 #!/bin/sh
pascal@17929 295
pascal@17929 296 [ -s /boot/grub/$(basename $base) ] &&
pascal@17929 297 dd if=/boot/grub/$(basename $base) of=$base
pascal@17929 298 EOT
pascal@17929 299 grub-install --no-floppy --root-directory=$mnt $base
pascal@17929 300 fi
pascal@17932 301 if [ -s $mnt/boot/grub/menu.lst ] &&
pascal@20158 302 ! grep -q /slitaz/boot/$bzimage $mnt/boot/grub/menu.lst; then
pascal@20158 303 echo -en "\nUpdate /boot/grub/menu.lst..."
pascal@17932 304 cat >> $mnt/boot/grub/menu.lst <<EOT
pascal@17932 305 title SliTaz GNU/Linux $(cat $mnt/slitaz/etc/slitaz-release)
pascal@20158 306 kernel /slitaz/boot/$bzimage rw root=/dev/null $extraargs autologin
pascal@17932 307 initrd /slitaz/boot/$initrd
pascal@17932 308
pascal@17932 309 EOT
pascal@17932 310 fi
pascal@17635 311 rm -f /tmp/wait
pascal@17932 312 [ "$useposixovl" ] && umount $mnt/slitaz
pascal@17635 313 return 0
pascal@17635 314 }
pascal@17635 315
pascal@17635 316 windev()
pascal@17635 317 {
pascal@17924 318 if [ -b "$1" ]; then
pascal@17924 319 device=$1
pascal@17928 320 elif [ "$1" ]; then
pascal@17932 321 echo "Invalid Linux/Windows partition"
pascal@17928 322 return 1
pascal@17924 323 else
pascal@17932 324 DEV="$(blkid | grep -iE "(msdos|vfat|ntfs|ext[234]|xfs|btrfs)" | sed 's/:.*//;s|/dev/||')"
pascal@17924 325 [ "$DEV" ] || return
pascal@17635 326 cat > /tmp/dialog$$ <<EOT
pascal@20771 327 $DIALOG --clear --title " Select your Linux/Windows partition " \
pascal@17932 328 --menu "\nPlease select the Linux/Windows partition according to its known size.
pascal@20771 329 The data will be kept untouched.\n" 17 70 8 \
pascal@17635 330 $(for i in $DEV ; do
pascal@17635 331 label="$(blkid | sed "/$i:/!d;s/.*://;s/[^ ]*UUID=[^ ]* //g;s/LABEL=//")"
pascal@17635 332 echo -n "/dev/$i \"$(($(cat /sys/block/*/$i/size)/2048))MB $label\" "
pascal@17635 333 done)
pascal@17635 334 EOT
pascal@17924 335 exec 3>&1
pascal@17924 336 [ $? -eq 0 ] || return
pascal@17924 337 device=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17924 338 exec 3>&-
pascal@17924 339 rm -f /tmp/dialog$$
pascal@17924 340 fi
pascal@17635 341 mnt=/tmp/mnt$$
pascal@17635 342 mkdir -p $mnt && mount $device $mnt
pascal@17635 343 }
pascal@17635 344
pascal@17635 345 extra_packages()
pascal@17635 346 {
pascal@17635 347 packages_list=
pascal@17635 348 packages_dir=
pascal@20771 349 $DIALOG --clear --title " Extra packages " \
pascal@17635 350 --defaultno --yesno \
pascal@20771 351 "Do you want to add extra packages ?" 7 70
pascal@17635 352 [ $? -eq 0 ] || return
pascal@17635 353 [ -s /var/lib/tazpkg/packages.txt ] || tazpkg recharge
pascal@18240 354 if [ -s $media/boot/vmlinuz-$(uname -r) ]; then
pascal@17635 355 cat > /tmp/dialog$$ <<EOT
pascal@20771 356 $DIALOG --clear --title " Select the packages " \
pascal@17635 357 --separate-output \
pascal@17635 358 --cancel-label "Skip" \
pascal@17635 359 --checklist "Please select the packages you want to install. Try with the first letter." \
pascal@18240 360 0 0 0 \\
pascal@17635 361 EOT
pascal@17635 362 awk -F\| '{ printf "%s \"%s\" off ",$1,$3 }' \
pascal@17635 363 /var/lib/tazpkg/packages.desc >> /tmp/dialog$$
pascal@17635 364 sh /tmp/dialog$$ 2> /tmp/dialog.out$$
pascal@17635 365 [ $? -eq 0 ] && packages_list="$(cat /tmp/dialog.out$$)"
pascal@17635 366 fi
pascal@17635 367 cat > /tmp/dialog$$ <<EOT
pascal@17635 368 $DIALOG --clear \
paul@17671 369 --title "Please select the directory with every custom package to install." \
pascal@20771 370 --cancel-label "Skip" --dselect $PWD 13 78
pascal@17635 371 EOT
pascal@17635 372 sh /tmp/dialog$$ 2> /tmp/dialog.out$$
pascal@17635 373 [ $? -eq 0 ] && packages_dir="$(cat /tmp/dialog.out$$)"
pascal@17635 374 rm -f /tmp/dialog$$ /tmp/dialog.out$$
pascal@17635 375 }
pascal@17635 376
pascal@17635 377 _install()
pascal@17635 378 {
pascal@17635 379 extra_packages
pascal@20771 380 $DIALOG --clear --title " SliTaz UMSDOS way installation " \
pascal@17635 381 --yes-label "Install" --yesno \
pascal@17635 382 "\nSliTaz will be installed in the subdirectory \\slitaz of the current
paul@17935 383 Linux/DOS/Windows partition. You can see your files from /mnt/dos.\n\n
pascal@17635 384 You can start SliTaz with \\slitaz\\boot\\tazboot.exe\n\n
pascal@17635 385 To uninstall SliTaz, you have only to remove this directory.
pascal@17635 386 The file \\boot.ini or \\config.sys may be modified too.\n\n
pascal@20771 387 SliTaz may run slowly on the 'UMSDOS way' installation due to the
pascal@17635 388 posixovl filesystem. The 'TAZUSB way' installation runs faster.\n\n
pascal@17635 389 To do a traditional installation with disk partitioning,
pascal@20771 390 start SliTaz Live with the 'SliTaz RAM boot' menu.\n" 19 70
pascal@17635 391 [ $? -eq 0 ] || return
pascal@17635 392 doinstall
pascal@17635 393 }
pascal@17635 394
pascal@17635 395 readtazbootconf()
pascal@17635 396 {
pascal@17635 397 kernel="$(sed '/^kernel=/!d;s/.*=//' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 398 initrd="$(sed '/^initrd=/!d;s/.*=//' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 399 cmdline="$(sed '/^kernel=/d;/^initrd=/d' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 400 }
pascal@17635 401
pascal@17635 402 bootinstalled()
pascal@17635 403 {
pascal@17635 404 [ "$(which kexec)" ] || return
pascal@17635 405 [ -x $mnt/slitaz$1 ] || return
pascal@17635 406 [ -s $mnt/slitaz/boot/tazboot.cmd ] || return
pascal@17635 407 readtazbootconf
pascal@17659 408 kexec -l $kernel --initrd $initrd --command-line "$cmdline" || return
pascal@17635 409 umount $mnt
pascal@17635 410 rm -rf $mnt
pascal@18240 411 quit "kexec -e"
pascal@17635 412 }
pascal@17635 413
pascal@17635 414 mkzip()
pascal@17635 415 {
pascal@17635 416 device=
pascal@17635 417 packages_list=
pascal@17635 418 packages_dir=
pascal@19029 419 mnt=/tmp/mkzipmnt$$
pascal@17635 420 mkdir -p $mnt
pascal@17930 421 $1 $2 || return
pascal@18140 422 for i in bootlace.com grubinst.exe grldr ; do
pascal@18140 423 wget -O $mnt/slitaz/boot/$i http://mirror.slitaz.org/boot/$i
pascal@18140 424 done
pascal@17635 425 readtazbootconf
pascal@17636 426 cat > $mnt/slitaz/boot/menu.lst <<EOT
pascal@17635 427 title SliTaz
pascal@17635 428 kernel $kernel $cmdline
pascal@17635 429 initrd $initrd
pascal@17635 430
pascal@17635 431 EOT
pascal@17635 432 while read file title; do
pascal@17637 433 file=$(ls $mnt/slitaz/boot/*$file* 2> /dev/null)
pascal@17637 434 [ -s "$file" ] && cat >> $mnt/slitaz/boot/menu.lst <<EOT
pascal@17635 435 title $title
pascal@17637 436 kernel ${file#$mnt}
pascal@17635 437
pascal@17635 438 EOT
pascal@17635 439 done <<EOT
pascal@17635 440 memtest MemTest
pascal@17635 441 pxe Web boot
pascal@17635 442 EOT
pascal@17636 443 unix2dos $mnt/slitaz/boot/menu.lst
pascal@17636 444 unix2dos > $mnt/slitaz/boot/install.txt <<EOT
pascal@17659 445 For DOS users (real mode only):
pascal@17659 446
pascal@17659 447 Start SliTaz with \\slitaz\\boot\\tazboot.exe
pascal@17659 448
pascal@17659 449
pascal@17635 450 For NT/2000/XP users:
pascal@17635 451
pascal@17635 452 1- Move the files grldr and menu.lst into the root directory
pascal@17635 453
pascal@17635 454 C:\\> copy \\slitaz\\boot\\grldr \\
pascal@17635 455 C:\\> copy \\slitaz\\boot\\menu.lst \\
pascal@17635 456
pascal@17635 457 2- Remove boot.ini attributes
pascal@17635 458
pascal@17635 459 C:\\> attrib -r -h -s boot.ini
pascal@17635 460
pascal@17635 461 3- Append the following line to boot.init
pascal@17635 462
pascal@17635 463 C:\\grldr="slitaz"
pascal@17635 464
pascal@17635 465 4- Restore boot.ini attributes
pascal@17635 466
pascal@17635 467 C:\\> attrib +r +h +s boot.ini
pascal@17635 468
pascal@17635 469 See http://diddy.boot-land.net/grub4dos/files/README_GRUB4DOS.txt
pascal@18140 470 and http://xpt.sourceforge.net/techdocs/nix/disk/boot/boot07-GrubForDosInfo/ar01s03.html
pascal@17635 471 EOT
pascal@18140 472 ( cd $mnt ; echo 'See \slitaz\boot\install.txt to launch SliTaz.' | \
pascal@18670 473 zip -zr9 $(basename "$ISO" .iso).zip slitaz )
pascal@19033 474 [ "$(which advzip)" ] &&
pascal@19033 475 echo "Recompressing $(basename "$ISO" .iso).zip ..." &&
pascal@19033 476 advzip -z4 $mnt/*.zip
pascal@17635 477 mv $mnt/*.zip .
pascal@19029 478 du -h $PWD/$(basename "$ISO" .iso).zip
pascal@17636 479 umount $mnt
pascal@17636 480 rm -rf $mnt
pascal@17635 481 }
pascal@17635 482
pascal@17635 483 install()
pascal@17635 484 {
pascal@17924 485 windev $1 || return
pascal@17635 486 packages_list=
pascal@17635 487 packages_dir=
pascal@17924 488 if [ "$1" ]; then
pascal@17924 489 doinstall
pascal@17924 490 else
pascal@17924 491 _install && bootinstalled /sbin/init
pascal@17924 492 fi
pascal@17635 493 umount $mnt
pascal@17635 494 rm -rf $mnt
pascal@17635 495 }
pascal@17635 496
pascal@17635 497 inst2zip()
pascal@17635 498 {
pascal@17924 499 if [ "$1" ]; then
pascal@17930 500 mkzip doinstall
pascal@17924 501 else
pascal@17924 502 mkzip _install
pascal@17924 503 fi
pascal@17635 504 }
pascal@17635 505
pascal@17635 506 _installtaz()
pascal@17635 507 {
pascal@20771 508 $DIALOG --clear --title " SliTaz TAZUSB way installation " \
pascal@17635 509 --yes-label "Install" --yesno \
pascal@17635 510 "\nSliTaz will be installed in the subdirectory \\slitaz of the current
paul@17935 511 Linux/DOS/Windows partition. You can see your files from /mnt/dos.\n\n
pascal@17635 512 You can start SliTaz with \\slitaz\\boot\\tazboot.exe\n\n
pascal@17635 513 To uninstall SliTaz, you have only to remove this directory.
pascal@17635 514 The file \\boot.ini or \\config.sys may be modified too.\n\n
pascal@17635 515 The filesystem is loaded entirely into memory upon boot to
paul@19451 516 increase responsiveness. Only /home lands on the hard disk.\n\n
pascal@17635 517 To do a traditional installation with disk partitioning,
pascal@20771 518 start SliTaz Live with the 'SliTaz RAM boot' menu.\n" 19 70
pascal@17635 519 [ $? -eq 0 ] || return
pascal@17635 520 doinstall tazusblike
pascal@17635 521 }
pascal@17635 522
pascal@17635 523 installtaz()
pascal@17635 524 {
pascal@17924 525 windev $1 || return
pascal@17635 526 packages_list=
pascal@17635 527 packages_dir=
pascal@17924 528 if [ "$1" ]; then
pascal@17924 529 doinstall tazusblike
pascal@17924 530 else
pascal@17924 531 _installtaz && bootinstalled /boot/bzimage
pascal@17924 532 fi
pascal@17635 533 umount $mnt
pascal@17635 534 rm -rf $mnt
pascal@17635 535 }
pascal@17635 536
pascal@17635 537 insttaz2zip()
pascal@17635 538 {
pascal@17924 539 if [ "$1" ]; then
pascal@17930 540 mkzip doinstall tazusblike
pascal@17924 541 else
pascal@17924 542 mkzip _installtaz
pascal@17924 543 fi
pascal@17635 544 }
pascal@17635 545
pascal@17635 546 bootiso()
pascal@17635 547 {
pascal@18799 548 cd /tmp
pascal@18240 549 for i in $(ls_r $media/boot/rootfs*gz); do
pascal@17635 550 grep -q ' lm ' /proc/cpuinfo && [ -s ${i}64 ] && i=${i}64
pascal@17635 551 cat $i
pascal@17635 552 n=$((4 - ($(stat -c %s $i) % 4)))
pascal@17635 553 [ $n -eq 4 ] || dd if=/dev/zero bs=1 count=$n
pascal@18799 554 done > initrd$$
pascal@18799 555 cmdline="root=/dev/null autologin lang=$LANG"
pascal@18799 556 [ -s /etc/keymap.conf ] && cmdline="$cmdline kmap=$(cat /etc/keymap.conf)"
pascal@18799 557 [ -s /etc/TZ ] && cmdline="$cmdline tz=$(cat /etc/TZ)"
pascal@18799 558 rm -f cmdline initrd 2> /dev/null
pascal@18799 559 getcustomconf kexec >/dev/null
pascal@18799 560 [ -s cmdline ] && cmdline="$cmdline $(cat cmdline)" && rm cmdline
pascal@18799 561 [ -s initrd ] && cat initrd >> initrd$$ && rm initrd
pascal@18240 562 kernel=$media/boot/bzImage
pascal@17635 563 grep -q ' lm ' /proc/cpuinfo && [ -s ${kernel}64 ] && kernel=${kernel}64
pascal@17635 564 . /etc/locale.conf
pascal@18799 565 kexec -l $kernel --initrd initrd$$ --command-line "$cmdline" &&
pascal@18799 566 rm -f initrd$$
pascal@18240 567 quit "kexec -e"
pascal@17635 568 }
pascal@17635 569
pascal@17635 570 tazboot()
pascal@17635 571 {
pascal@17928 572 if [ -z "$1" ]; then
pascal@20771 573 $DIALOG --clear --title " SliTaz bootloader for DOS " \
pascal@17928 574 --yes-label "Install" --yesno \
pascal@17635 575 "\nThe file TAZBOOT.EXE will be created in the top directory. It supports
pascal@17635 576 any linux kernel, multiple initramfs, a kernel command line and
pascal@17635 577 an ISO image file loopback (retrieves files from an ISO file).\n\n
pascal@20771 578 Usage: tazboot.exe [[@commands]|[kernel=<bzimage>]
pascal@17635 579 [initrd=<rootfs>[,<rootfs2>...]] [bootfrom=<isofile>] cmdline args ...]\n\n
pascal@17635 580 Defaults: tazboot @tazboot.cmd or tazboot kernel=bzImage auto\n\n\
pascal@17635 581 Examples for tazboot.cmd:\n\n\
pascal@17635 582 bootfrom=\\isos\\slitaz-4.0.iso\n\
pascal@17635 583 kernel=boot/bzImage\n\
pascal@17635 584 initrd=boot/rootfs4.gz,boot/rootfs3.gz,boot/rootfs2.gz,boot/rootfs1.gz\n\
pascal@17635 585 rw root=/dev/null autologin\n\n\
pascal@17635 586 kernel=\\slitaz\\vmlinuz root=/dev/sda5 ro\n\n
pascal@20771 587 Unlike GRUB4DOS, it doesn't require unfragmented ISO image files.\n" 0 0
pascal@17928 588 [ $? -eq 0 ] || return
pascal@17928 589 fi
pascal@17635 590 gettazboot tazboot.exe
pascal@19029 591 du -h $PWD/tazboot.exe
pascal@17635 592 }
pascal@17635 593
pascal@17635 594 md5()
pascal@17635 595 {
pascal@17635 596 dotwait "Checking files"
pascal@19432 597 ( cd $media ; ${md5sum:-md5sum -c md5sum*} 2>&1 | sort ) > /tmp/data
pascal@17928 598 unset md5sum
pascal@17635 599 rm -f /tmp/wait
pascal@17928 600 if [ "$1" ]; then
pascal@17924 601 cat /tmp/data
pascal@17924 602 else
pascal@20771 603 $DIALOG --clear --title " Checked files " \
pascal@18240 604 --textbox /tmp/data 0 0
pascal@17924 605 fi
pascal@17635 606 rm -f /tmp/data
pascal@17635 607 }
pascal@17635 608
pascal@17635 609 gotcdfile()
pascal@17635 610 {
pascal@18240 611 for i in "$media/$1" "$media/*/$1" "$media/*/isolinux/$1" ; do
pascal@17635 612 file=$(ls $i 2> /dev/null | sed q)
pascal@17635 613 [ -s "$file" ] && break
pascal@17635 614 done
pascal@17635 615 }
pascal@17635 616
pascal@17635 617 sha()
pascal@17635 618 {
pascal@17635 619 gotcdfile 'sha*sum*'
pascal@17635 620 sha=$(basename $file)
pascal@18240 621 md5sum="${sha%sum*}sum -c ${file#$media/}"
pascal@17928 622 md5 $@
pascal@17635 623 }
pascal@17635 624
pascal@17635 625 readme()
pascal@17635 626 {
pascal@17635 627 gotcdfile 'README*'
pascal@17924 628 if [ "$1" ]; then
pascal@17924 629 cat $file
pascal@17924 630 else
pascal@20771 631 $DIALOG --clear --title " Readme " --textbox $file 0 0
pascal@17924 632 fi
pascal@17635 633 }
pascal@17635 634
pascal@17635 635 bzimage()
pascal@17635 636 {
pascal@17928 637 if [ -z "$1" ]; then
pascal@20771 638 $DIALOG --clear --title " Create linux.exe ? " \
pascal@17924 639 --yes-label "Install" --yesno \
pascal@17635 640 "\nLinux.exe launches the linux kernel under DOS (in real mode only).
pascal@17635 641 The cmdline arguments are supported except initrd=,
pascal@17635 642 vga= (you can try 'rdev -v') and mem= (partially).
pascal@20771 643 \nExample:\nC:\\> linux.exe root=/dev/hda2 ro panic=60\n" 12 70
pascal@17924 644 [ $? -eq 0 ] || return
pascal@17924 645 fi
pascal@18240 646 cp $media/boot/bzImage linux.exe
pascal@19029 647 du -h $PWD/linux.exe
pascal@17635 648 }
pascal@17635 649
pascal@17635 650 memtest()
pascal@17635 651 {
pascal@17924 652 if [ -z "$1" ]; then
pascal@20771 653 $DIALOG --clear --title " Create memtest.exe ? " \
pascal@17924 654 --yes-label "Install" --yesno \
pascal@17635 655 "\nMemtest86 is a thorough, stand alone memory test for x86 architecture
pascal@17635 656 computers. BIOS based memory tests are a quick, cursory check and often
pascal@20771 657 miss many of the failures that are detected by Memtest86.\n" 0 0
pascal@17924 658 [ $? -eq 0 ] || return
pascal@17924 659 fi
pascal@17924 660 gotcdfile 'memtest*' && cp $file memtest.exe
pascal@19029 661 du -h $PWD/memtest.exe
pascal@17635 662 }
pascal@17635 663
pascal@17635 664 mkfat12()
pascal@17635 665 {
pascal@17635 666 [ $(($(get 0 $1) - 0x5A4D)) -eq 0 ] || return
pascal@17635 667 J=$(($(get 3 $1 1) + 0x02))
pascal@17635 668 R=$((1 + $(get 497 $1 1) + 1 + ($(get 500 $1)-1)/32))
pascal@17635 669 [ $R -lt 2500 ] || return
pascal@17635 670 [ $((($(get 500 $1)-1) & 31)) -lt 30 ] &&
pascal@17635 671 ddq if=$file bs=32 count=1 seek=$(($R*16 - 1)) of=/dev/fd0
pascal@17635 672 G="18 0 2 0 0 0 0 0"
pascal@17635 673 [ $J -gt 25 ] || G=""
pascal@17635 674 F=0
pascal@17635 675 for i in 1 2 3; do
pascal@17635 676 F=$((((2880-$R-$F-$F)*3+1023)/1024))
pascal@17635 677 done
pascal@17635 678 bytes2bin 0xEB $J 0x90 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 \
pascal@17635 679 0 2 2 $(($R%256)) $(($R/256)) 2 64 0 64 11 0xF0 $F 0 \
pascal@17635 680 $G | ddq bs=1 of=/dev/fd0
pascal@17635 681 ddq if=/dev/zero bs=512 count=$((4+$F+$F)) seek=$R of=/dev/fd0
pascal@17635 682 for i in $R $(($R+$F)) ; do
pascal@17635 683 bytes2bin 0xF0 0xFF 0xFF | ddq bs=512 seek=$i of=/dev/fd0
pascal@17635 684 done
pascal@17635 685 echo -n $(basename $1) | ddq bs=1 seek=3 count=8 of=/dev/fd0
pascal@17635 686 }
pascal@17635 687
pascal@17635 688 mkfloppy()
pascal@17635 689 {
pascal@21542 690 dotwait "Create a $(basename $1 .exe) boot floppy"
pascal@17635 691 ddq if=$1 of=/dev/fd0
pascal@17635 692 mkfat12 $1
pascal@17635 693 rm -f /tmp/wait
pascal@17635 694 }
pascal@17635 695
pascal@17635 696 fdmemtest()
pascal@17635 697 {
pascal@17924 698 if [ -z "$1" ]; then
pascal@20771 699 $DIALOG --clear --title " Create a Memtest86 boot floppy " \
pascal@17924 700 --yes-label "Create floppy" --yesno \
pascal@17635 701 "\nMemtest86 is a thorough, stand alone memory test for x86 architecture
pascal@17635 702 computers. BIOS based memory tests are a quick, cursory check and often
pascal@17635 703 miss many of the failures that are detected by Memtest86.\n\n
pascal@20771 704 Please insert a blank disk in floppy drive.\n" 0 0
pascal@17924 705 [ $? -eq 0 ] || return
pascal@17924 706 fi
pascal@17924 707 gotcdfile 'memtest*' && mkfloppy $file
pascal@17635 708 }
pascal@17635 709
pascal@17635 710 pxe()
pascal@17635 711 {
pascal@20762 712 gotcdfile '?pxe*'
pascal@17928 713 if [ -z "$1" ]; then
pascal@21542 714 $DIALOG --clear --title " Create $(basename $file .exe).exe ? " \
pascal@17928 715 --yes-label "Install" --yesno \
pascal@17635 716 "\nBoot your operating system from the internet and enjoy a full system
pascal@17635 717 working entirely in RAM with speed and stability in mind. The Linux Kernel
pascal@17635 718 and the complete SliTaz compressed root filesystem will be loaded into RAM
pascal@20771 719 from the Web using PXE and HTTP protocols.\n" 0 0
pascal@17928 720 [ $? -eq 0 ] || return
pascal@17928 721 fi
pascal@21542 722 cp $file $(basename $file .exe).exe
pascal@21542 723 du -h $PWD/$(basename $file .exe).exe
pascal@17635 724 }
pascal@17635 725
pascal@17635 726 fdpxe()
pascal@17635 727 {
pascal@17924 728 if [ -z "$1" ]; then
pascal@20771 729 $DIALOG --clear --title " Create a SliTaz Web boot floppy " \
pascal@17924 730 --yes-label "Create floppy" --yesno \
pascal@17635 731 "\nBoot your operating system from the internet and enjoy a full system
pascal@17635 732 working entirely in RAM with speed and stability in mind. The Linux Kernel
pascal@17635 733 and the complete SliTaz compressed root filesystem will be loaded into RAM
pascal@17635 734 from the Web using PXE and HTTP protocols.\n\n
pascal@20771 735 Please insert a blank disk in floppy drive.\n" 0 0
pascal@17924 736 [ $? -eq 0 ] || return
pascal@17924 737 fi
pascal@20762 738 gotcdfile '?pxe*' && mkfloppy $file
pascal@17924 739 }
pascal@17924 740
pascal@17924 741 menuitem()
pascal@17924 742 {
pascal@17924 743 [ "$3" ] && shift
pascal@17924 744 echo -en "\"$1\" \"$2\""
pascal@17635 745 }
pascal@17635 746
pascal@17635 747 gotposixovl()
pascal@17635 748 {
pascal@19425 749 mount.posixovl 2>&1 | grep -qi usage && gotcdfile 'rootfs*.gz' &&
pascal@19425 750 menuitem "$@"
pascal@17635 751 }
pascal@17635 752
pascal@17635 753 gotposixovlzip()
pascal@17635 754 {
pascal@17635 755 [ "$(which zip)" ] && gotposixovl "$1" "$2"
pascal@17635 756 }
pascal@17635 757
pascal@17635 758 xfile()
pascal@17635 759 {
pascal@17924 760 [ "$(which $1)" ] && menuitem "$@"
pascal@17635 761 }
pascal@17635 762
pascal@17635 763 cdfile()
pascal@17635 764 {
pascal@17924 765 gotcdfile "$1" && menuitem "$@"
pascal@17635 766 }
pascal@17635 767
pascal@19425 768 gottazusb()
pascal@19425 769 {
pascal@19425 770 gotcdfile 'rootfs*.gz' && xfile tazusb "$@"
pascal@19425 771 }
pascal@19425 772
pascal@17659 773 isbzImage()
pascal@17659 774 {
pascal@17659 775 [ $(get 514 $file 4) -eq 1400005704 ] &&
pascal@17659 776 [ $(($(get 529 $file 1) & 1)) -eq 1 ]
pascal@17659 777 }
pascal@17659 778
pascal@17635 779 cdfilex()
pascal@17635 780 {
pascal@17924 781 gotcdfile "$1" && [ "$(which kexec)" ] && isbzImage && menuitem "$@"
pascal@17635 782 }
pascal@17635 783
pascal@17635 784 cdfilef()
pascal@17635 785 {
pascal@17635 786 [ -e /sys/block/fd0 ] && cdfile "$@"
pascal@17635 787 }
pascal@17635 788
pascal@17635 789 cdexe()
pascal@17635 790 {
pascal@17635 791 gotcdfile "$1" &&
pascal@17635 792 [ $(get 0 $file 2>/dev/null || echo 0) -eq 23117 ] &&
pascal@17924 793 menuitem "$@"
pascal@17635 794 }
pascal@17635 795
pascal@17635 796 misspkg()
pascal@17635 797 {
pascal@19029 798 for i in zip kexec-tools posixovl cdrkit cdrkit-isoinfo ; do
pascal@17635 799 [ -d /var/lib/tazpkg/installed/$i/ ] && continue
pascal@17924 800 [ "$1" != "install" ] && menuitem "$@" && return
pascal@17635 801 tazpkg get-install $i
pascal@17635 802 done
pascal@17635 803 }
pascal@17635 804
pascal@17635 805 missing()
pascal@17635 806 {
pascal@17635 807 misspkg install
pascal@17635 808 }
pascal@17635 809
pascal@17635 810 ishybrid()
pascal@17635 811 {
pascal@18670 812 [ $(get 510 "$ISO") -eq 43605 ] || return
pascal@18670 813 C=$((2048*$(get $(((17*2048) + 71)) "$ISO" 4)))
pascal@18670 814 [ $(get $C "$ISO" 4) -eq 1 ] || return
pascal@18670 815 [ $(get $(($C+30)) "$ISO" 4) -eq $((0x88AA55)) ] || return
pascal@18670 816 C=$((2048*$(get $(($C+40)) "$ISO" 4)))
pascal@18670 817 [ $(get $(($C+64)) "$ISO" 4) -eq 1886961915 ] && menuitem "$@"
pascal@17635 818 }
pascal@17635 819
pascal@17635 820 isiso()
pascal@17635 821 {
pascal@18670 822 [ $(get 32769 "$ISO" 4) -eq 808469571 ] && menuitem "$@"
pascal@18140 823 }
pascal@18140 824
pascal@18140 825 hastazboot()
pascal@18140 826 {
pascal@18670 827 [ $(get 0 "$ISO") -eq 23117 ] && menuitem "$@"
pascal@18034 828 }
pascal@18034 829
pascal@18034 830 burnable()
pascal@18034 831 {
pascal@19510 832 [ "$(sed '/Can wr.*1$/!d' /proc/sys/dev/cdrom/info 2> /dev/null)" ] &&
pascal@19510 833 menuitem "$@"
pascal@18034 834 }
pascal@18034 835
pascal@18034 836 blankable()
pascal@18034 837 {
pascal@19510 838 [ "$(sed '/Can wr.*RW.*1$/!d' /proc/sys/dev/cdrom/info 2> /dev/null)" ] &&
pascal@19510 839 menuitem "$@"
pascal@18034 840 }
pascal@18034 841
pascal@18034 842 burniso()
pascal@18034 843 {
pascal@18034 844 wodim -v speed=$(fgrep "drive speed" /proc/sys/dev/cdrom/info | cut -f3) \
pascal@18034 845 -eject -multi "$ISO"
pascal@18034 846 }
pascal@18034 847
pascal@18034 848 blankcd()
pascal@18034 849 {
pascal@18034 850 wodim -v -blank=fast
pascal@17635 851 }
pascal@17635 852
pascal@18675 853 customsector()
pascal@18675 854 {
pascal@19324 855 local c=$(echo $(get 32848 "$ISO" 4))
pascal@19324 856 hascustomconf $(($c+16)) && echo $(($c+16)) || echo $c
pascal@18675 857 }
pascal@18675 858
pascal@18675 859 hascustomconf()
pascal@18675 860 {
pascal@19324 861 [ "$(ddq bs=2k skip=${1:-$(customsector)} if="$ISO" | ddq bs=1 count=6)" \
pascal@20892 862 = "#!boot" ]
pascal@18675 863 }
pascal@18675 864
pascal@18675 865 gotcustomconf()
pascal@18675 866 {
pascal@18675 867 hascustomconf && menuitem "$@"
pascal@18675 868 }
pascal@18675 869
pascal@19425 870 hasflavor()
pascal@19425 871 {
pascal@19425 872 [ -x /usr/bin/tazlito ] && [ -s $media/boot/bzImage ] && menuitem "$@"
pascal@19425 873 }
pascal@19425 874
pascal@17635 875 gotisomd5()
pascal@17635 876 {
pascal@17635 877 [ "$(which md5sum 2> /dev/null)" ] &&
pascal@18670 878 [ $(get 0 "$ISO") -eq 23117 ] &&
pascal@18670 879 [ $(get 18 "$ISO") -ne 0 ] && menuitem "$@"
pascal@17635 880 }
pascal@17635 881
pascal@18675 882 getcustomconf()
pascal@18675 883 {
pascal@18675 884 ddq bs=2k skip=$(customsector) if="$ISO" | while read line; do
pascal@18675 885 case "$line" in
pascal@18675 886 \#!boot*) ;;
pascal@18675 887 append=*) echo ${line#append=} > cmdline && ls -l $PWD/cmdline ;;
pascal@18675 888 initrd:*) cnt=${line#initrd:}
pascal@18675 889 { ddq bs=512 count=$(($cnt / 512));
pascal@18675 890 ddq bs=1 count=$(($cnt % 512)); } > initrd &&
pascal@18675 891 ls -l $PWD/initrd
pascal@18675 892 break ;;
pascal@20771 893 *) break ;;
pascal@18675 894 esac
pascal@18675 895 done
pascal@18675 896 [ "$1" ] && return 0
pascal@18675 897 echo -e "\rPress RETURN to continue."
pascal@18675 898 read n
pascal@18675 899 }
pascal@18675 900
pascal@17635 901 isomd5()
pascal@17635 902 {
pascal@17635 903 dotwait "Checking iso image"
pascal@18670 904 [ "$(ddq if="$ISO" bs=2k skip=16 \
pascal@20892 905 count=$(($(get 32848 "$ISO" 4)-16)) | md5sum)" = \
pascal@18670 906 "$(ddq if="$ISO" bs=16 count=1 skip=2047 | od -N 16 -t x1 -An | \
pascal@17635 907 sed 's/ //g') -" ] && echo "OK" || echo "ERROR"
pascal@17635 908 echo -en "\rChecking iso hybrid boot..."
pascal@18671 909 n=$(($(get 2 "$ISO")-1+($(get 4 "$ISO")-1)*512))
pascal@17635 910 if [ $n -lt 40000 -a $n -gt 32768 ]; then
pascal@18670 911 s=$(get 0 "$ISO" 2 $n | awk '{ i+= $0 } END { print i }')
pascal@18670 912 [ $(((1+$s+$(get $(($n+1)) "$ISO" 1)) % 65536)) -eq 0 ] &&
pascal@17635 913 echo "OK" || echo "ERROR"
pascal@17635 914 fi
pascal@18675 915 if hascustomconf; then
pascal@18672 916 echo -en "\rChecking iso custom config..."
pascal@18672 917 TMP=/tmp/$(basename $0)$$md5
pascal@18675 918 md5="$(ddq bs=2k skip=$(customsector) if="$ISO" | while read line; do
pascal@18670 919 case "$line" in
pascal@18672 920 \#!boot*) echo ${line#*boot } > $TMP ;;
pascal@18670 921 append=*) echo $line ;;
pascal@18670 922 initrd:*) echo $line
pascal@18675 923 cnt=${line#initrd:}
pascal@18675 924 ddq bs=512 count=$((cnt / 512))
pascal@18675 925 ddq bs=1 count=$((cnt % 512))
pascal@18670 926 break ;;
pascal@20771 927 *) break ;;
pascal@18670 928 esac
pascal@18670 929 done | md5sum | cut -c1-32)"
pascal@20892 930 [ "$md5" = "$(cat $TMP)" ] && echo "OK" || echo "ERROR"
pascal@18672 931 rm -f $TMP
pascal@18670 932 fi
pascal@17635 933 rm -f /tmp/wait
pascal@17928 934 [ "$1" ] && return 0
pascal@17635 935 echo -e "\rPress RETURN to continue."
pascal@17635 936 read n
pascal@17635 937 }
pascal@17635 938
pascal@17635 939 usbdev()
pascal@17635 940 {
pascal@17635 941 dotwait "Wait 5 seconds for USB devices"
pascal@17635 942 sleep 5
pascal@17635 943 rm -f /tmp/wait
pascal@17635 944 DEV="$(grep -l 1 /sys/block/*/removable | \
pascal@17635 945 sed 's|/sys/block/\(.*\)/removable|\1|')"
pascal@17635 946 grep -qs 1 /sys/block/$DEV/ro && return
pascal@17635 947 [ "$DEV" ] || return
pascal@17635 948 cat > /tmp/dialog$$ <<EOT
pascal@20771 949 $DIALOG --clear --title " Select your USB key " \
pascal@17635 950 --menu "\nPlease select the USB key according to its known size.\n\n" \
pascal@18240 951 0 0 0 \
pascal@17635 952 $(for i in $DEV ; do
pascal@17635 953 echo -n "/dev/$i \"$(($(cat /sys/block/$i/size)/2048))MB $(cat /sys/block/$i/device/model 2> /dev/null)\" "
pascal@17635 954 done) \
pascal@17635 955
pascal@17635 956 EOT
pascal@17635 957 exec 3>&1
pascal@17635 958 device=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17635 959 rm -f /tmp/dialog$$
pascal@17635 960 retval=$?
pascal@17635 961 exec 3>&-
pascal@17635 962 rm -f /tmp/dialog$$
pascal@17635 963 [ $retval -eq 0 ]
pascal@17635 964 }
pascal@17635 965
pascal@17635 966 tazusbmsg()
pascal@17635 967 {
pascal@17635 968 [ "$(which tazusb 2> /dev/null)" ] || return
pascal@17635 969 echo "You should choose 'USB key read/write installation' to be
pascal@17635 970 able to save the package updates or your own configuration and data files.\n\n"
pascal@17635 971 }
pascal@17635 972
pascal@17635 973 usbbootkey()
pascal@17635 974 {
pascal@17924 975 if [ -b "$1" ]; then
pascal@17924 976 device=$1
pascal@17928 977 elif [ "$1" ]; then
pascal@17928 978 echo "Invalid USB key device"
pascal@20771 979 return 1
pascal@17924 980 else
pascal@20771 981 $DIALOG --clear --title " Create a USB boot key " \
pascal@17924 982 --yes-label "Continue" --yesno \
pascal@17635 983 "\nThe USB key will be used like a CD-ROM. You will not be able to write
pascal@17635 984 any data on the boot partition.\n\n
pascal@17635 985 An extra FAT32 partition will be created with the remaining free space.\n\n
pascal@20771 986 $(tazusbmsg)Please plug your USB stick in now.\n" 16 70
pascal@17924 987 [ $? -eq 0 ] || return
pascal@17924 988 usbdev || return
pascal@17635 989
pascal@17924 990 # perform dd in progress bar
pascal@18670 991 max=$(($(stat -c %s "$ISO")/2048))
pascal@20771 992 i=0; ddq if="$ISO" bs=1024k | (
pascal@20771 993 while ddq bs=1024k count=1 ; do
pascal@17924 994 i=$(($i + 1))
pascal@17924 995 [ $i -gt $max ] && break
pascal@17924 996 echo $((($i*100)/$max)) | dialog --gauge \
pascal@17924 997 " The ISO image transfer can be long. Please wait..." \
pascal@17924 998 6 70 0 > /dev/tty 2>&1
pascal@17924 999 done ) > $device
pascal@17924 1000 fi
pascal@17635 1001
paul@17671 1002 # partition + fat32 format for the remaining space
pascal@17860 1003 for p in 0 16; do
pascal@17860 1004 get $((450+$p)) $device 2 12 | xargs echo | {
pascal@17860 1005 read dx cx ol oh ll lh
pascal@17860 1006 [ $dx -eq $((0x3F17)) ] || continue
pascal@17635 1007 cx=$(($cx & 0xFF00))
pascal@17635 1008 ofs=$(($ll+($lh<<16)))
pascal@17635 1009 n=$(($(cat /sys/block/${device#/dev/}/size)-$ofs))
pascal@17635 1010 m=$(($cx+($n/8)))
pascal@17635 1011 [ $m -gt $((0x3FF00)) ] && m=$((0x3FF00))
pascal@17635 1012 m=$((($m & 0xFF00)+(($m>>16)<<6)))
pascal@17635 1013 words2bin 0 $((0x101+$cx)) 0x3F0B $((32+$m)) \
pascal@17635 1014 $ll $lh $(($n & 0xFFFF)) $(($n >> 16)) | \
pascal@17860 1015 ddq bs=1 seek=$((462-$p)) of=$device
pascal@17635 1016 if [ "$(which mkdosfs 2> /dev/null)" ]; then
pascal@17635 1017 losetup -o $((512*$ofs)) /dev/loop2 $device
pascal@17635 1018 mkdosfs -n "SLITAZ BOOT" /dev/loop2
pascal@17635 1019 words2bin $(($ofs & 0xFFFF)) $(($ofs >> 16)) | \
pascal@17635 1020 ddq bs=1 seek=28 of=/dev/loop2
pascal@17860 1021 sync
pascal@17635 1022 losetup -d /dev/loop2
pascal@17635 1023 fi
pascal@17860 1024 }
pascal@17860 1025 done
pascal@17635 1026 }
pascal@17635 1027
pascal@17635 1028 usbkey()
pascal@17635 1029 {
pascal@20771 1030 $DIALOG --clear --title " Create a SliTaz USB key " \
pascal@17635 1031 --yes-label "Continue" --yesno \
pascal@17635 1032 "\nUnlike a hard drive install, the filesystem is kept in a compressed
pascal@17635 1033 rootfs.gz. The filesystem is loaded entirely into memory upon boot.
pascal@17635 1034 This should increase responsiveness, protect the filesystem against
pascal@17635 1035 accidental corruption and reduce read/writes to the USB drive.
pascal@17635 1036 Once setup, the tazusb utility can rewrite the root filesystem
pascal@20771 1037 with any changes you have made since booting up,
pascal@17635 1038 giving the effective benefits of a hard drive install.\n\n
pascal@17635 1039 /home is mounted on boot using the UUID of your particular flash drive.
pascal@17635 1040 Unlike a device name, the UUID has the benefit of never changing from machine
pascal@17635 1041 to machine.\n\n
pascal@20771 1042 Please plug your USB stick in now.\n" 19 70
pascal@17635 1043 [ $? -eq 0 ] || return
pascal@17635 1044 usbdev || return
pascal@17635 1045 exec 3>&1
pascal@17635 1046 format=`$DIALOG --clear \
pascal@17635 1047 --title " Select the filesystem " \
pascal@17635 1048 --radiolist "\nPlease select the filesystem type to create.\n\n\
pascal@20771 1049 The filesystem creation will erase all the data in the USB key." 14 70 4 \
pascal@17635 1050 "none" "Do not erase the USB key" on \
pascal@17635 1051 "ext3" "Ext3 journaling filesystem" off \
pascal@17635 1052 "ext2" "Ext2 filesystem" off \
pascal@17635 1053 "fat32" "Windows FAT32 filesystem" off \
pascal@17635 1054 2>&1 1>&3`
pascal@17635 1055 retval=$?
pascal@17635 1056 exec 3>&-
pascal@17635 1057 [ $retval -eq 0 ] || return
pascal@17635 1058 [ "$format" != "none" ] && tazusb format $device "SliTaz" $format
pascal@18670 1059 tazusb gen-iso2usb "$ISO" $device
pascal@17635 1060 }
pascal@17635 1061
pascal@17635 1062 dokexec()
pascal@17635 1063 {
pascal@17659 1064 kexec -l $file || return
pascal@18240 1065 quit "kexec -e"
pascal@17635 1066 }
pascal@17635 1067
pascal@17635 1068 runmemtest()
pascal@17635 1069 {
pascal@17635 1070 gotcdfile 'memtest*' && dokexec
pascal@17635 1071 }
pascal@17635 1072
pascal@17635 1073 runpxe()
pascal@17635 1074 {
pascal@20762 1075 gotcdfile '?pxe*' && dokexec
pascal@17635 1076 }
pascal@17635 1077
pascal@17931 1078 flavdata()
pascal@17931 1079 {
pascal@18670 1080 [ $(get 1024 "$ISO") -eq 35615 ] && n=2 || n=$((1+$(get 417 "$ISO" 1)))
pascal@19425 1081 [ $n -eq 4 ] && n=20
pascal@20724 1082 [ $(get $(($n*512)) "$ISO") -eq 35615 ] || n=13
pascal@19510 1083 ddq if="$ISO" bs=512 skip=$n count=20 | zcat 2>/dev/null
pascal@17931 1084 }
pascal@17931 1085
pascal@17931 1086 hasflavinfo()
pascal@17931 1087 {
pascal@20892 1088 [ "$(flavdata | ddq bs=1 count=7 | strings)" = \
pascal@20724 1089 "0707010" ] && menuitem "$@"
pascal@17931 1090 }
pascal@17931 1091
pascal@17931 1092 showfavinfo()
pascal@17931 1093 {
pascal@17931 1094 mkdir -p /tmp/data
pascal@17931 1095 flavdata | ( cd /tmp/data ; cpio -i )
pascal@17931 1096 file=/tmp/data/info
pascal@17931 1097 cat /tmp/data/*desc > $file
pascal@18627 1098 if [ -s /tmp/data/*receipt ]; then
pascal@18627 1099 echo "=== receipt ==="
pascal@18627 1100 cat /tmp/data/*receipt
pascal@18627 1101 fi >> $file
pascal@17931 1102 for i in /tmp/data/*list* ; do
pascal@17931 1103 echo "=== extra ${i#*list} files"
pascal@17931 1104 cat $i
pascal@17931 1105 done >> $file
pascal@17931 1106 if [ "$1" ]; then
pascal@17931 1107 cat $file
pascal@17931 1108 else
pascal@20771 1109 $DIALOG --clear --title " Flavor info " \
pascal@18240 1110 --textbox $file 0 0
pascal@17931 1111 fi
pascal@17931 1112 rm -rf /tmp/data
pascal@17931 1113 }
pascal@17931 1114
pascal@18626 1115 flavor()
pascal@18626 1116 {
pascal@18626 1117 name="$(flavdata | cpio -t 2> /dev/null | sed 's/.[a-z]*$//;q')"
pascal@18626 1118 echo "Create ${name:=flavor}.flavor..."
pascal@18670 1119 tazlito iso2flavor "$ISO" $name
pascal@18771 1120 ls -l $name.flavor 2> /dev/null && return
pascal@18771 1121 sleep 5
pascal@18771 1122 [ "$1" ] && return
pascal@18771 1123 echo -e "\rPress RETURN to continue."
pascal@18771 1124 read n
pascal@18626 1125 }
pascal@18626 1126
pascal@20892 1127 if [ "$1" = "--build" ]; then #install-begin
pascal@18151 1128 uuencode -m - < ifmem.bin | sed -e '/^ifmemcode$/r/dev/stdin' \
pascal@18151 1129 -e '/^ifmemcode$/d' -i $0
pascal@18140 1130 uuencode -m - < bootloader.bin | sed -e '/^bootloader$/r/dev/stdin' \
pascal@18140 1131 -e '/^bootloader$/d' -e '/install-begin$/,/install-end$/d' -i $0
pascal@18140 1132 exit
pascal@18140 1133 fi #install-end
pascal@18140 1134 parse_isolinux()
pascal@18140 1135 {
pascal@18140 1136 awk 'BEGIN { IGNORECASE=1 }
pascal@18145 1137 function multi(n)
pascal@18145 1138 {
pascal@18145 1139 auto=$n
pascal@18145 1140 for (--n; n < NF; n+=2) {
pascal@18145 1141 s=$n
pascal@18145 1142 if (s ~ /M$/) s = substr(s,0,length(s)-1)
pascal@18145 1143 else s /= 1024
pascal@18145 1144 sizes=int(s) " " sizes
pascal@18145 1145 }
pascal@18145 1146 next
pascal@18145 1147 }
pascal@18140 1148 {
pascal@18140 1149 if ($1 == "LABEL") {
pascal@18140 1150 label=$2
pascal@18140 1151 if (auto == "") auto=label
pascal@18140 1152 }
pascal@18140 1153 if ($1 == "KERNEL" || $1 == "COM32") kernel[label]=$2
pascal@18140 1154 if ($1 == "INITRD") initrd[label]=$2
pascal@18140 1155 if ($1 == "APPEND") {
pascal@18140 1156 i=2
pascal@18145 1157 if (kernel[label] ~ "ifmem.c32") multi(3)
pascal@18140 1158 if (kernel[label] ~ "c32box.c32") {
pascal@18140 1159 if ($2 == "linux") { kernel[label]=$3; i=4 }
pascal@18145 1160 if ($2 == "ifmem") multi(4)
pascal@18140 1161 }
pascal@18140 1162 if (kernel[label] ~ "ifcpu64.c32") { auto=$4; next }
pascal@18140 1163 while (i <= NF) {
pascal@18140 1164 if ($i ~ "^initrd=") initrd[label]=substr($i,8)
pascal@18140 1165 else cmdline[label]=cmdline[label] " " $i
pascal@18140 1166 i++
pascal@18140 1167 }
pascal@18140 1168 }
pascal@18140 1169 }
pascal@18140 1170 END {
pascal@18140 1171 print "KERNEL=\"" kernel[auto] "\""
pascal@18140 1172 print "INITRD=\"" initrd[auto] "\""
pascal@18140 1173 print "CMDLINE=\"" substr(cmdline[auto],2) "\""
pascal@18145 1174 print "SIZES=\"" sizes "\""
pascal@18140 1175 }'
pascal@18140 1176 }
pascal@18140 1177
pascal@18140 1178 locase()
pascal@18140 1179 {
pascal@18140 1180 echo "$1" | tr [A-Z] [a-z]
pascal@18140 1181 }
pascal@18140 1182
pascal@18151 1183 ifmemcode()
pascal@18151 1184 {
pascal@18151 1185 uudecode <<EOT
pascal@18151 1186 ifmemcode
pascal@18151 1187 EOT
pascal@18151 1188 }
pascal@18151 1189
pascal@18140 1190 floppyset()
pascal@18140 1191 {
pascal@19425 1192 gotcdfile 'isolinux.cfg'
pascal@19432 1193 $0 include $file | parse_isolinux > /tmp/var$$
pascal@18140 1194 . /tmp/var$$
pascal@19425 1195 [ -z "$KERNEL" ] && echo "Can't parse isolinux.cfg" && return
pascal@18240 1196 for i in $media/$KERNEL $(dirname $file)/$KERNEL $media/$(locase $KERNEL) \
pascal@18240 1197 $(dirname $file)/$(locase $KERNEL); do
pascal@19433 1198 i="$(ls $i* | sed q)"
pascal@19433 1199 [ -n "$i" ] && KERNEL=$i && break
pascal@18240 1200 done
pascal@20771 1201 rm -f /tmp/var$$
pascal@18240 1202 [ $(get 514 $KERNEL 4) -eq 1400005704 ] || return
pascal@18240 1203 n=$(($(get 497 $KERNEL 1)+1))
pascal@18240 1204 ddq bs=512 count=$n if=$KERNEL of=/tmp/fd$$
pascal@18140 1205 uudecode <<EOT | ddq of=/tmp/fd$$ conv=notrunc
pascal@18140 1206 bootloader
pascal@18140 1207 EOT
pascal@18140 1208 pos=$(($n*512))
pascal@18140 1209 if [ -n "$CMDLINE" ]; then
pascal@18140 1210 echo -n "$CMDLINE" | ddq bs=512 count=1 conv=sync >> /tmp/fd$$
pascal@18140 1211 bytes2bin $n | ddq conv=notrunc \
pascal@18140 1212 bs=1 seek=497 count=1 of=/tmp/fd$$
pascal@18140 1213 words2bin $pos | ddq conv=notrunc \
pascal@18140 1214 bs=1 seek=34 count=2 of=/tmp/fd$$
pascal@18240 1215 [ $(get 518 $KERNEL 4) -ge 514 ] &&
pascal@18155 1216 words2bin 32768 9 | ddq conv=notrunc \
pascal@18140 1217 bs=1 seek=552 count=4 of=/tmp/fd$$
pascal@18140 1218 fi
pascal@18140 1219 syssize=$(echo $(get 500 /tmp/fd$$ 4))
pascal@18240 1220 ddq bs=512 skip=$n if=$KERNEL | cat - /dev/zero | \
pascal@18155 1221 ddq bs=512 count=$((($syssize+31)/32)) conv=sync >> /tmp/fd$$
pascal@18140 1222 base=$(stat -c %s /tmp/fd$$)
pascal@18140 1223 len=
pascal@18140 1224 if [ "$INITRD" ]; then
pascal@18140 1225 l=0
pascal@18140 1226 for i in ${INITRD//,/ }; do
pascal@18240 1227 for j in $media/$i $(dirname $KERNEL)/$i $media/$(locase $i) \
pascal@18240 1228 $(dirname $KERNEL)/$(locase $i); do
pascal@19433 1229 j="$(ls $j* | sed q)"
pascal@19433 1230 [ -n "$j" ] && i=$j && break
pascal@18240 1231 done
pascal@18240 1232 ddq if=$i >> /tmp/fd$$
pascal@18240 1233 l=$(($l+$(stat -c %s $i)))
pascal@18140 1234 r=$((4 - ($l % 4)))
pascal@18140 1235 if [ $r -ne 4 ]; then
pascal@18140 1236 ddq if=/dev/zero bs=1 count=$r >> /tmp/fd$$
pascal@18140 1237 l=$(($l + $r))
pascal@18140 1238 fi
pascal@18143 1239 case "$i:$INITRD" in
pascal@18143 1240 *rootfs.gz:*rootfs.gz,*) continue # loram
pascal@18140 1241 esac
pascal@18140 1242 len="$len $l"; l=0
pascal@18140 1243 done
pascal@18143 1244 rdadrs=${RDADRS:-$(((($syssize*16)+0x1F0000) & -4096))}
pascal@18140 1245 words2bin $(($rdadrs & 0xFFFF)) $(($rdadrs >> 16)) | ddq \
pascal@18140 1246 conv=notrunc bs=1 seek=536 count=4 of=/tmp/fd$$
pascal@18140 1247 fi
pascal@18140 1248 n=$(echo $len | wc -w)
pascal@18140 1249 if [ $((494 - $(get 494 /tmp/fd$$))) -ge $(($n * 4)) ]; then
pascal@18140 1250 i=$(($(get 494 /tmp/fd$$)))
pascal@18140 1251 bytes2bin $(($i + ($n*4) - 256)) | ddq bs=1 conv=notrunc \
pascal@18140 1252 seek=496 count=1 of=/tmp/fd$$
pascal@18140 1253 else
pascal@18140 1254 i=$(($pos + 0x1FC - ($n*4)))
pascal@18140 1255 bytes2bin $(($i % 256)) $((i / 256)) 252 | ddq bs=1 \
pascal@18140 1256 conv=notrunc seek=494 count=3 of=/tmp/fd$$
pascal@18151 1257 s=$(($i - 2*$(echo "$SIZES" | wc -w)))
pascal@18151 1258 p=$(($s - $(ifmemcode | wc -c)))
pascal@18151 1259 ifmemcode | ddq bs=1 conv=notrunc seek=$p of=/tmp/fd$$
pascal@18151 1260 words2bin $SIZES | ddq bs=1 conv=notrunc seek=$s of=/tmp/fd$$
pascal@18151 1261 bytes2bin 154 $(($p%256)) $(($p/256)) 0 144 | \
pascal@18151 1262 ddq bs=1 conv=notrunc seek=60 of=/tmp/fd$$
pascal@18140 1263 fi
pascal@18140 1264 for r in $len ; do
pascal@18140 1265 words2bin $(($r & 0xFFFF)) $(($r >> 16)) | ddq conv=notrunc \
pascal@18140 1266 bs=1 seek=$i count=4 of=/tmp/fd$$
pascal@18140 1267 i=$(($i + 4))
pascal@18140 1268 done
pascal@18140 1269 split -b 1440k /tmp/fd$$ fd$$
pascal@18140 1270 rm -f /tmp/fd$$
pascal@18140 1271 n=1; i=0; r=0
pascal@18140 1272 set -- $len
pascal@18140 1273 ls fd$$* | while read file ; do
pascal@18140 1274 if [ $i -gt $(($1+$base)) ]; then
pascal@18140 1275 shift
pascal@18140 1276 r=$(($r+100)); n=0; i=0; base=0
pascal@18140 1277 fi
pascal@18140 1278 ddq of=$file bs=18k seek=80 count=0
pascal@18140 1279 i=$(($i+1474560))
pascal@18140 1280 printf "mv %s fd%03d.img\n" $file $(($r+$n))
pascal@18140 1281 n=$(($n+1))
pascal@18140 1282 done | sh
pascal@19029 1283 du -ch $PWD/fd???.img
pascal@18140 1284 }
pascal@18140 1285
pascal@17635 1286 quit()
pascal@17635 1287 {
pascal@18240 1288 umount -d $media
pascal@18240 1289 rmdir $media
pascal@18240 1290 ${1:-exit}
pascal@17635 1291 }
pascal@17635 1292
pascal@19008 1293 infoiso()
pascal@19008 1294 {
pascal@19008 1295 isoinfo -d -i "$ISO" > /tmp/isoinfo$$
pascal@19008 1296 if [ -x "$(which iso2exe)" ]; then
pascal@19008 1297 echo "----"
pascal@20159 1298 blkid "$ISO" | while read args; do
pascal@20159 1299 set -- $args
pascal@20159 1300 while [ -n "$2" ]; do
pascal@20159 1301 case "$2" in
pascal@20159 1302 *UUID*|PT*) echo $2;;
pascal@20159 1303 esac
pascal@20159 1304 shift
pascal@20159 1305 done
pascal@20159 1306 done
pascal@20159 1307 if ! fdisk -l "$ISO" | grep -q 'valid partition'; then
pascal@20159 1308 fdisk -l "$ISO" | grep heads
pascal@20159 1309 fdisk -l "$ISO" | sed 's/^ *[^ ]* *//;s/ */ /g;$!d'
pascal@20159 1310 fi
pascal@20159 1311 echo "----"
pascal@19008 1312 iso2exe -l "$ISO"
pascal@19008 1313 fi >> /tmp/isoinfo$$
pascal@19008 1314 if [ "$1" ]; then
pascal@19008 1315 cat /tmp/isoinfo$$
pascal@19008 1316 else
pascal@20771 1317 $DIALOG --clear --title " Info ISO " \
pascal@19008 1318 --textbox /tmp/isoinfo$$ 0 0
pascal@19008 1319 fi
pascal@19008 1320 rm -f /tmp/isoinfo$$
pascal@19008 1321 }
pascal@19008 1322
pascal@18289 1323 isotitle()
pascal@18289 1324 {
pascal@18778 1325 echo "$(blkid "$ISO" | sed 's/.*LABEL="\([^"]*\).*/\1/') $(stat \
pascal@18778 1326 -c %y $media/.|sed 's/ .*//') $(basename "$ISO")"
pascal@18289 1327 }
pascal@18289 1328
pascal@20892 1329 if [ "$1" = "include" ]; then
pascal@19432 1330 [ -s "$2" ] && cd $(dirname "$2") && awk -v exe=$0 \
pascal@19432 1331 '{ if ($1 == "include") system(exe " include " $2); else print }' <"$2"
pascal@19432 1332 exit
pascal@19432 1333 fi
pascal@18034 1334 ISO="${1:-/dev/null}"
pascal@20620 1335 [ ${ISO:0:1} != "/" ] && ISO=$(cd $(dirname $ISO); echo $PWD/$(basename $ISO))
pascal@17635 1336 [ -z "$(isiso 2> /dev/null)" ] && echo "Usage : $0 file.iso" && exit 1
pascal@18666 1337 media=/tmp/media$$
pascal@18240 1338 mkdir -p $media
pascal@18670 1339 mount -o loop,ro "$ISO" $media
pascal@17635 1340
pascal@20892 1341 if [ "$2" = "list" ]; then
pascal@17928 1342 sed '/^\$(.*") \\/!d;s/^\$(\(.*\)").*/\1"/' $0 | while read line; do
pascal@17928 1343 eval $line
pascal@17928 1344 echo
pascal@17928 1345 done | sed '/^$/d;/"usbkey"/d'
pascal@17928 1346 quit
pascal@17928 1347 fi
pascal@17924 1348 if grep -q "^$2()" $0; then
pascal@17924 1349 exe=$2
pascal@17924 1350 shift 2
pascal@18140 1351 if [ -n "$(eval $(grep "\"$exe\"" $0 | sed \
pascal@18140 1352 '/^\$/!d;s/.(\(.*\)[\t ]*".*"[\t ]*".*/\1/'))" ]; then
pascal@18289 1353 isotitle
pascal@17924 1354 grep "\"$exe\"" $0 | sed '/^\$/!d;s/.*"[\t ]*"\(.*\)".*/\1/'
pascal@18140 1355 echo ----
pascal@17924 1356 $exe "$@"
pascal@17924 1357 fi
pascal@17924 1358 quit
pascal@17924 1359 fi
pascal@17924 1360
pascal@17635 1361 while true; do
pascal@17635 1362 cat > /tmp/dialog$$ <<EOT
pascal@21092 1363 $DIALOG --clear --title " $(isotitle) " --menu "" 28 70 30 \
pascal@17635 1364 $(cdfile 'README*' "readme" "Show the README file") \
pascal@18675 1365 $(gotcustomconf "getcustomconf" "Get custom config") \
pascal@17635 1366 $(gotisomd5 "isomd5" "Check the ISO image") \
pascal@17635 1367 $(cdfile 'md5sum*' "md5" "Check the ISO files") \
pascal@17635 1368 $(cdfile 'sha*sum*' "sha" "Check the ISO files") \
pascal@19008 1369 $(xfile isoinfo "infoiso" "ISO image info") \
pascal@17635 1370 $(cdfilex boot/bzImage "bootiso" "Boot the ISO image") \
pascal@18034 1371 $(burnable "burniso" "Burn the ISO image") \
pascal@18034 1372 $(blankable "blankcd" "Blank the CD/DVD") \
pascal@17635 1373 $(gotposixovl "install" "Hard disk installation (UMSDOS way)") \
pascal@17635 1374 $(gotposixovl "installtaz" "Hard disk installation (TAZUSB way)") \
pascal@17635 1375 $(gotposixovlzip "inst2zip" "ZIP installation archive (UMSDOS way)") \
pascal@17635 1376 $(gotposixovlzip "insttaz2zip" "ZIP installation archive (TAZUSB way)") \
pascal@19425 1377 $(gottazusb "usbkey" "USB key read/write installation") \
pascal@17635 1378 $(ishybrid "usbbootkey" "USB boot key (read only)") \
paul@17935 1379 $(hasflavinfo "showfavinfo" "Show flavor extra info") \
pascal@19425 1380 $(hasflavor "flavor" "Get flavor file") \
pascal@18140 1381 $(cdfile isolinux.cfg "floppyset" "Boot floppy set") \
pascal@18140 1382 $(hastazboot "tazboot" "Get tazboot.exe Linux loader") \
pascal@17635 1383 $(cdexe boot/bzImage "bzimage" "Get linux DOS/EXE file") \
pascal@17635 1384 $(cdexe 'memtest*' "memtest" "Get Memtest86 DOS/EXE file") \
pascal@17635 1385 $(cdfilef 'memtest*' "fdmemtest" "Create a Memtest86 boot floppy") \
pascal@17635 1386 $(cdfilex 'memtest*' "runmemtest" "Start Memtest86") \
pascal@20724 1387 $(cdexe '?pxe*' "pxe" "Get SliTaz Web boot DOS/EXE utility") \
pascal@20724 1388 $(cdfilef '?pxe*' "fdpxe" "Create a SliTaz Web boot floppy") \
pascal@20724 1389 $(cdfilex '?pxe*' "runpxe" "Start the SliTaz Web boot utility") \
pascal@17635 1390 $(misspkg "missing" "Install packages to get more options") \
pascal@17924 1391 $(menuitem "quit" "Quit this utility")
pascal@17635 1392 EOT
pascal@17635 1393 exec 3>&1
pascal@17635 1394 value=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17635 1395 retval=$?
pascal@17635 1396 exec 3>&-
pascal@17635 1397 rm -f /tmp/dialog$$
pascal@18771 1398 [ $retval -eq 0 ] || quit
pascal@17635 1399 $value
pascal@17635 1400 done