SliTaz Repositories

     1.1 --- a/BootProg/stuff/boot32.asm	Wed Feb 23 11:28:45 2022 +0100
     1.2 +++ b/BootProg/stuff/boot32.asm	Wed Feb 23 11:49:52 2022 +0000
     1.3 @@ -11,7 +11,8 @@
     1.4  ;;                                                                          ;;
     1.5  ;;                                 Features:                                ;;
     1.6  ;;                                 ~~~~~~~~~                                ;;
     1.7 -;; - FAT32 supported using BIOS int 13h function 42h or 02h.                ;;
     1.8 +;; - FAT32 supported using BIOS int 13h function 42h (IOW, it will only     ;;
     1.9 +;;   work with modern BIOSes supporting HDDs bigger than 8 GB)              ;;
    1.10  ;;                                                                          ;;
    1.11  ;; - Loads a 16-bit executable file in the MS-DOS .COM or .EXE format       ;;
    1.12  ;;   from the root directory of a disk and transfers control to it          ;;
    1.13 @@ -262,30 +263,33 @@
    1.14  ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    1.15  
    1.16          mov     ds, bp                  ; bp=ds=seg the file is loaded to
    1.17 +
    1.18          add     bp, [bx+08h]            ; bp = image base
    1.19          mov     ax, [bx+06h]            ; ax = reloc items
    1.20          mov     di, [bx+18h]            ; di = reloc table pointer
    1.21  
    1.22          cmp     word [bx], 5A4Dh        ; "MZ" signature?
    1.23 -
    1.24          je      RelocateEXE             ; yes, it's an EXE program
    1.25  
    1.26  ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    1.27  ;; Setup and run a .COM program ;;
    1.28 -;; Set CS=DS=ES=SP SP=0 IP=100h ;;
    1.29 +;; Set CS=DS=ES=SS SP=0 IP=100h ;;
    1.30 +;; AX=0ffffh BX=0 CX=0 DX=drive ;;
    1.31  ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    1.32  
    1.33 +        mov     ax, 0ffffh              ; both FCB in the PSP don't have a valid drive identifier
    1.34 +        mov     di, 100h                ; ip
    1.35          mov     bp, ImageLoadSeg-10h    ; "org 100h" stuff :)
    1.36          mov     ss, bp
    1.37          xor     sp, sp
    1.38          push    bp                      ; cs, ds and es
    1.39 -        mov     bh, 1                   ; ip
    1.40          jmp     short Run
    1.41  
    1.42  ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    1.43  ;; Relocate, setup and run a .EXE program     ;;
    1.44  ;; Set CS:IP, SS:SP, DS, ES and AX according  ;;
    1.45  ;; to wiki.osdev.org/MZ#Initial_Program_State ;;
    1.46 +;; AX=0ffffh BX=0 CX=0 DX=drive               ;;
    1.47  ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    1.48  
    1.49  ReloCycle:
    1.50 @@ -308,11 +312,11 @@
    1.51          push    si                      ; containing the PSP structure
    1.52  
    1.53          add     bp, [bx+16h]            ; cs for EXE
    1.54 -        mov     bx, [bx+14h]            ; ip for EXE
    1.55 +        mov     di, [bx+14h]            ; ip for EXE
    1.56  Run:
    1.57          pop     ds
    1.58          push    bp
    1.59 -        push    bx
    1.60 +        push    di
    1.61          push    ds
    1.62          pop     es
    1.63  
    1.64 @@ -332,6 +336,7 @@
    1.65  ReadCluster:
    1.66          mov     bp, [bx(bpbBytesPerSector)]
    1.67          shr     bp, 4                           ; bp = paragraphs per sector
    1.68 +        add     eax, byte 1             ; adjust LBA for next sector
    1.69          inc     cx
    1.70          loop    ReadSectorLBA
    1.71  
    1.72 @@ -374,7 +379,6 @@
    1.73          add     eax, edx
    1.74          adc     word [bx(HiLBA)], bx
    1.75          add     eax, [bx(bpbHiddenSectors)]
    1.76 -        adc     word [bx(HiLBA)], bx
    1.77  
    1.78  ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    1.79  ;; Reads a sector using BIOS Int 13h fn 42h ;;
    1.80 @@ -386,6 +390,8 @@
    1.81  ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
    1.82  
    1.83  ReadSectorLBA:
    1.84 +        adc     word [bx(HiLBA)], bx
    1.85 +        mov     dx, [bx(bsDriveNumber)] ; restore BIOS boot drive number
    1.86          pusha
    1.87  
    1.88          push    bx
    1.89 @@ -395,43 +401,13 @@
    1.90          push    bx
    1.91          push    byte 1 ; sector count word = 1
    1.92          push    byte 16 ; packet size byte = 16, reserved byte = 0
    1.93 -        push    eax
    1.94 -        pop     cx                      ; low LBA
    1.95 -        pop     ax                      ; high LBA
    1.96 -        cwd                             ; clear dx (CHS disk <2TB)
    1.97 -        div     word [bx(bpbSectorsPerTrack)] ; up to 8GB CHS disks
    1.98 -
    1.99 -        xchg    ax, cx                  ; restore low LBA, save high LBA / SPT
   1.100 -        div     word [bx(bpbSectorsPerTrack)]
   1.101 -                                        ; ax = LBA / SPT
   1.102 -                                        ; dx = LBA % SPT         = sector - 1
   1.103 -        inc     dx
   1.104 -
   1.105 -        xchg    cx, dx                  ; restore high LBA / SPT, save sector no.
   1.106 -        div     word [bx(bpbHeadsPerCylinder)]
   1.107 -                                        ; ax = (LBA / SPT) / HPC = cylinder
   1.108 -                                        ; dx = (LBA / SPT) % HPC = head
   1.109 -        shl     ah, 6
   1.110 -        mov     ch, al
   1.111 -                                        ; ch = LSB 0...7 of cylinder no.
   1.112 -        or      cl, ah
   1.113 -                                        ; cl = MSB 8...9 of cylinder no. + sector no.
   1.114 -        mov     dh, dl
   1.115 -                                        ; dh = head no.
   1.116  
   1.117  ReadSectorLBARetry:
   1.118 -        mov     dl, [bx(bsDriveNumber)] ; restore BIOS boot drive number
   1.119          mov     si, sp
   1.120          mov     ah, 42h                 ; ah = 42h = extended read function no.
   1.121          int     13h                     ; extended read sectors (DL, DS:SI)
   1.122          jnc     ReadSuccess             ; CF = 0 if no error
   1.123  
   1.124 -ReadSectorCHSRetry:
   1.125 -        mov     ax, 201h                ; al = sector count = 1
   1.126 -                                        ; ah = 2 = read function no.
   1.127 -        int     13h                     ; read sectors (AL, CX, DX, ES:BX)
   1.128 -        jnc     ReadSuccess             ; CF = 0 if no error
   1.129 -
   1.130          cbw                             ; ah = 0 = reset function
   1.131          int     13h                     ; reset drive (DL)
   1.132  
   1.133 @@ -447,16 +423,12 @@
   1.134  
   1.135          popa
   1.136  
   1.137 -        add     eax, byte 1             ; adjust LBA for next sector
   1.138 -        adc     word [bx(HiLBA)], bx
   1.139 -
   1.140          stc
   1.141          loop    ReadSectorNext
   1.142  
   1.143          cmp     esi, 0FFFFFF8h          ; carry=0 if last cluster, and carry=1 otherwise
   1.144  
   1.145  ReadSectorNext:
   1.146 -        mov     dx, [bx(bsDriveNumber)] ; restore BIOS boot drive number
   1.147          ret
   1.148  
   1.149  ;;;;;;;;;;;;;;;;;;;;;;;;;;
   1.150 @@ -473,8 +445,8 @@
   1.151          cmp     al, '.'
   1.152          jne     puts
   1.153          cbw
   1.154 -;        int     16h                     ; wait for a key...
   1.155 -;        int     19h                     ; bootstrap
   1.156 +        int     16h                     ; wait for a key...
   1.157 +        int     19h                     ; bootstrap
   1.158  
   1.159  Stop:
   1.160          hlt

     2.1 --- a/alsaequal/receipt	Wed Feb 23 11:28:45 2022 +0100
     2.2 +++ b/alsaequal/receipt	Wed Feb 23 11:49:52 2022 +0000
     2.3 @@ -13,6 +13,13 @@
     2.4  DEPENDS="alsa-utils caps"
     2.5  BUILD_DEPENDS="caps alsa-lib-dev"
     2.6  
     2.7 +# What is the latest version available today?
     2.8 +current_version()
     2.9 +{
    2.10 +	wget -O - https://github.com/bassdr/alsaequal/releases 2> /dev/null | \
    2.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
    2.12 +}
    2.13 +
    2.14  # Rules to configure and make the package.
    2.15  compile_rules()
    2.16  {

     3.1 --- a/attica/receipt	Wed Feb 23 11:28:45 2022 +0100
     3.2 +++ b/attica/receipt	Wed Feb 23 11:49:52 2022 +0000
     3.3 @@ -13,6 +13,13 @@
     3.4  DEPENDS="libQtCore libQtNetwork"
     3.5  BUILD_DEPENDS="cmake qmake Qt4-dev"
     3.6  
     3.7 +# What is the latest version available today?
     3.8 +current_version()
     3.9 +{
    3.10 +	wget -O - 'https://invent.kde.org/frameworks/attica/-/tags?sort=updated_desc' 2>/dev/null | \
    3.11 +	sed '/item-title/!d;s|.*>v||;s|<.*||;q'
    3.12 +}
    3.13 +
    3.14  # Rules to configure and make the package.
    3.15  compile_rules()
    3.16  {

     4.1 --- a/exempi/receipt	Wed Feb 23 11:28:45 2022 +0100
     4.2 +++ b/exempi/receipt	Wed Feb 23 11:49:52 2022 +0000
     4.3 @@ -14,6 +14,13 @@
     4.4  DEPENDS="expat gcc83-lib-base"
     4.5  BUILD_DEPENDS="expat-dev gcc83 libboost-dev libboost-test-dev"
     4.6  
     4.7 +# What is the latest version available today?
     4.8 +current_version()
     4.9 +{
    4.10 +	wget -O - https://libopenraw.freedesktop.org/exempi/ 2>/dev/null | \
    4.11 +	sed "/latest/d;/$PACKAGE-[0-9]/!d;/tar/!d;s|.*$PACKAGE-\\(.*\\).tar.*|\\1|" | sort -Vr | sed q
    4.12 +}
    4.13 +
    4.14  # Rules to configure and make the package.
    4.15  compile_rules()
    4.16  {

     5.1 --- a/newsbeuter/receipt	Wed Feb 23 11:28:45 2022 +0100
     5.2 +++ b/newsbeuter/receipt	Wed Feb 23 11:49:52 2022 +0000
     5.3 @@ -14,6 +14,13 @@
     5.4  BUILD_DEPENDS="pkg-config gettext libxml2-dev libjson-c-dev curl-dev \
     5.5  sqlite-dev stfl-dev ncursesw-dev gcc83 gcc83-lib-base"
     5.6  
     5.7 +# What is the latest version available today?
     5.8 +current_version()
     5.9 +{
    5.10 +	wget -O - https://github.com/newsboat/newsboat/tags 2>/dev/null | \
    5.11 +	sed '/archive.*tar/!d;s|.*/r*\(.*\).tar.*|\1|;q'
    5.12 +}
    5.13 +
    5.14  # Rules to configure and make the package.
    5.15  compile_rules()
    5.16  {

     6.1 --- a/nss_ldap/receipt	Wed Feb 23 11:28:45 2022 +0100
     6.2 +++ b/nss_ldap/receipt	Wed Feb 23 11:49:52 2022 +0000
     6.3 @@ -13,6 +13,13 @@
     6.4  DEPENDS="cyrus-sasl libkrb5 libldap openssl libcomerr libcomerr3"
     6.5  BUILD_DEPENDS="openldap-dev perl"
     6.6  
     6.7 +# What is the latest version available today?
     6.8 +current_version()
     6.9 +{
    6.10 +	wget -O - https://raw.githubusercontent.com/PADL/nss_ldap/master/ChangeLog 2>/dev/null | \
    6.11 +	sed '/^[0-9]/!d;s|[\t ].*||;q'
    6.12 +}
    6.13 +
    6.14  # Rules to configure and make the package.
    6.15  compile_rules()
    6.16  {

     7.1 --- a/okular/receipt	Wed Feb 23 11:28:45 2022 +0100
     7.2 +++ b/okular/receipt	Wed Feb 23 11:49:52 2022 +0000
     7.3 @@ -21,6 +21,13 @@
     7.4  polkit-qt-dev libdbusmenu-qt-dev libQtDeclarative alsa-lib-dev exiv2-dev \
     7.5  attica-dev libboost libboost-dev kdelibs kdelibs-dev kactivities kfilemetadata"
     7.6  
     7.7 +# What is the latest version available today?
     7.8 +current_version()
     7.9 +{
    7.10 +	wget -O - https://okular.kde.org/ 2>/dev/null | \
    7.11 +	sed 's|>|>\n|g' | sed '/been released/!d;s|The ||;s| .*||;q'
    7.12 +}
    7.13 +
    7.14  # Rules to configure and make the package.
    7.15  compile_rules()
    7.16  {

     8.1 --- a/open-iscsi/receipt	Wed Feb 23 11:28:45 2022 +0100
     8.2 +++ b/open-iscsi/receipt	Wed Feb 23 11:49:52 2022 +0000
     8.3 @@ -13,6 +13,13 @@
     8.4  DEPENDS="linux-scsi"
     8.5  BUILD_DEPENDS="linux-module-headers"
     8.6  
     8.7 +# What is the latest version available today?
     8.8 +current_version()
     8.9 +{
    8.10 +	wget -O - https://github.com/open-iscsi/open-iscsi/releases 2>/dev/null | \
    8.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
    8.12 +}
    8.13 +
    8.14  # Rules to configure and make the package.
    8.15  compile_rules()
    8.16  {

     9.1 --- a/owncloud-client/receipt	Wed Feb 23 11:28:45 2022 +0100
     9.2 +++ b/owncloud-client/receipt	Wed Feb 23 11:49:52 2022 +0000
     9.3 @@ -13,6 +13,14 @@
     9.4  
     9.5  DEPENDS="csync libQtTest libQtNetwork libQtCore libQtXml libQtGui"
     9.6  BUILD_DEPENDS="csync-dev Qt4-dev cmake qmake"
     9.7 +
     9.8 +# What is the latest version available today?
     9.9 +current_version()
    9.10 +{
    9.11 +	wget -O - https://github.com/owncloud/client/releases 2>/dev/null | \
    9.12 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
    9.13 +}
    9.14 +
    9.15  # Rules to configure and make the package.
    9.16  compile_rules()
    9.17  {

    10.1 --- a/oxygen-icons/receipt	Wed Feb 23 11:28:45 2022 +0100
    10.2 +++ b/oxygen-icons/receipt	Wed Feb 23 11:49:52 2022 +0000
    10.3 @@ -11,6 +11,13 @@
    10.4  TARBALL="${PACKAGE}-${VERSION}.tar.xz"
    10.5  WGET_URL="https://download.kde.org/stable/frameworks/${VERSION%.*}/${PACKAGE}${VERSION%.*.*}-$VERSION.tar.xz"
    10.6  
    10.7 +# What is the latest version available today?
    10.8 +current_version()
    10.9 +{
   10.10 +	wget -O - https://invent.kde.org/frameworks/oxygen-icons5/-/tags 2>/dev/null | \
   10.11 +	sed '/item-title/!d;s|.*">v||;s|<.*||;q'
   10.12 +}
   10.13 +
   10.14  # Rules to gen a SliTaz package suitable for Tazpkg.
   10.15  genpkg_rules()
   10.16  {

    11.1 --- a/powermanga/receipt	Wed Feb 23 11:28:45 2022 +0100
    11.2 +++ b/powermanga/receipt	Wed Feb 23 11:49:52 2022 +0000
    11.3 @@ -14,6 +14,13 @@
    11.4  DEPENDS="libsdl-mixer zlib libogg"
    11.5  BUILD_DEPENDS="automake libsdl-dev libsdl-mixer-dev zlib-dev libogg-dev"
    11.6  
    11.7 +# What is the latest version available today?
    11.8 +current_version()
    11.9 +{
   11.10 +	wget -O - https://raw.githubusercontent.com/brunonymous/Powermanga/master/CHANGES 2>/dev/null | \
   11.11 +	sed '/owermanga/!d;s|.*ga ||;q'
   11.12 +}
   11.13 +
   11.14  # Rules to configure and make the package.
   11.15  compile_rules()
   11.16  {

    12.1 --- a/procmail/receipt	Wed Feb 23 11:28:45 2022 +0100
    12.2 +++ b/procmail/receipt	Wed Feb 23 11:49:52 2022 +0000
    12.3 @@ -11,6 +11,13 @@
    12.4  WGET_URL="${WEB_SITE}$TARBALL"
    12.5  CONFIG_FILES="/etc/procmail*"
    12.6  
    12.7 +# What is the latest version available today?
    12.8 +current_version()
    12.9 +{
   12.10 +	wget -O - https://en.wikipedia.org/wiki/Procmail 2>/dev/null | \
   12.11 +	sed '/Final release/!d;s|.*release.*">||'
   12.12 +}
   12.13 +
   12.14  # Rules to configure and make the package.
   12.15  compile_rules()
   12.16  {

    13.1 --- a/psycopg/receipt	Wed Feb 23 11:28:45 2022 +0100
    13.2 +++ b/psycopg/receipt	Wed Feb 23 11:49:52 2022 +0000
    13.3 @@ -13,6 +13,13 @@
    13.4  DEPENDS="python egenix-mx-base libpostgresqlclient"
    13.5  BUILD_DEPENDS="python-dev egenix-mx-base postgresql-dev libpostgresqlclient"
    13.6  
    13.7 +# What is the latest version available today?
    13.8 +current_version()
    13.9 +{
   13.10 +	wget -O - https://pypi.org/project/psycopg2/ 2>/dev/null | \
   13.11 +	sed '/psycopg2 [0-9]/!d;s|.*g2.||'
   13.12 +}
   13.13 +
   13.14  # Rules to configure and make the package.
   13.15  compile_rules()
   13.16  {

    14.1 --- a/puzzles/receipt	Wed Feb 23 11:28:45 2022 +0100
    14.2 +++ b/puzzles/receipt	Wed Feb 23 11:49:52 2022 +0000
    14.3 @@ -14,6 +14,13 @@
    14.4  DEPENDS="cairo gtk+ libxcb xorg-libXrandr"
    14.5  BUILD_DEPENDS="file gtk+-dev"
    14.6  
    14.7 +# What is the latest version available today?
    14.8 +current_version()
    14.9 +{
   14.10 +	wget -O - 'https://git.tartarus.org/?p=simon/puzzles.git' 2>/dev/null | \
   14.11 +	sed '/<i>[0-9-]*<.i>/!d;s|.*<i>||;s|<.*||;s|-||g;q'
   14.12 +}
   14.13 +
   14.14  # Rules to configure and make the package.
   14.15  compile_rules()
   14.16  {

    15.1 --- a/pv/receipt	Wed Feb 23 11:28:45 2022 +0100
    15.2 +++ b/pv/receipt	Wed Feb 23 11:49:52 2022 +0000
    15.3 @@ -14,6 +14,13 @@
    15.4  DEPENDS=""
    15.5  BUILD_DEPENDS="gettext"
    15.6  
    15.7 +# What is the latest version available today?
    15.8 +current_version()
    15.9 +{
   15.10 +	wget -O - https://github.com/a-j-wood/pv/releases 2>/dev/null | \
   15.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
   15.12 +}
   15.13 +
   15.14  # Rules to configure and make the package.
   15.15  compile_rules()
   15.16  {

    16.1 --- a/python-enum34/receipt	Wed Feb 23 11:28:45 2022 +0100
    16.2 +++ b/python-enum34/receipt	Wed Feb 23 11:49:52 2022 +0000
    16.3 @@ -13,6 +13,13 @@
    16.4  DEPENDS="python"
    16.5  BUILD_DEPENDS="python-setuptools"
    16.6  
    16.7 +# What is the latest version available today?
    16.8 +current_version()
    16.9 +{
   16.10 +	wget -O - https://pypi.org/project/enum34/ 2>/dev/null | \
   16.11 +	sed '/enum34 [0-9]/!d;s|.*m34.||;q'
   16.12 +}
   16.13 +
   16.14  # Rules to configure and make the package.
   16.15  compile_rules()
   16.16  {

    17.1 --- a/qca/receipt	Wed Feb 23 11:28:45 2022 +0100
    17.2 +++ b/qca/receipt	Wed Feb 23 11:49:52 2022 +0000
    17.3 @@ -13,6 +13,13 @@
    17.4  DEPENDS="libQtCore"
    17.5  BUILD_DEPENDS="Qt4-dev qmake"
    17.6  
    17.7 +# What is the latest version available today?
    17.8 +current_version()
    17.9 +{
   17.10 +	wget -O - https://raw.githubusercontent.com/highfidelity/qca/master/README 2>/dev/null | \
   17.11 +	sed '/^  New/!d;s|.*in ||;q'
   17.12 +}
   17.13 +
   17.14  # Rules to configure and make the package.
   17.15  compile_rules()
   17.16  {

    18.1 --- a/qt5/receipt	Wed Feb 23 11:28:45 2022 +0100
    18.2 +++ b/qt5/receipt	Wed Feb 23 11:49:52 2022 +0000
    18.3 @@ -11,7 +11,7 @@
    18.4  WEB_SITE="https://www.qt.io/"
    18.5  
    18.6  TARBALL="$SOURCE-$VERSION.tar.xz"
    18.7 -WGET_URL="http://download.qt.io/archive/qt/${VERSION%.*}/$VERS[BION/single/$TARBALL"
    18.8 +WGET_URL="http://download.qt.io/archive/qt/${VERSION%.*}/$VERSION/single/$TARBALL"
    18.9  PROVIDE="qt-x11-opensource-src Qt5"
   18.10  
   18.11  DEPENDS="gcc83-lib-base glibc-locale libQt3Support libQt5Core libQt5DBus 

    19.1 --- a/qtfm/receipt	Wed Feb 23 11:28:45 2022 +0100
    19.2 +++ b/qtfm/receipt	Wed Feb 23 11:49:52 2022 +0000
    19.3 @@ -15,6 +15,13 @@
    19.4  DEPENDS="libQtGui libQtNetwork libmagic"
    19.5  BUILD_DEPENDS="cmake Qt4-dev qmake libmagic-dev"
    19.6  
    19.7 +# What is the latest version available today?
    19.8 +current_version()
    19.9 +{
   19.10 +	wget -O - https://github.com/rodlie/qtfm/releases 2>/dev/null | \
   19.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
   19.12 +}
   19.13 +
   19.14  # Rules to configure and make the package.
   19.15  compile_rules()
   19.16  {

    20.1 --- a/qtgain/receipt	Wed Feb 23 11:28:45 2022 +0100
    20.2 +++ b/qtgain/receipt	Wed Feb 23 11:49:52 2022 +0000
    20.3 @@ -13,6 +13,14 @@
    20.4  DEPENDS="libQtCore libQtGui libQtNetwork"
    20.5  BUILD_DEPENDS="Qt4-dev qmake"
    20.6  
    20.7 +# What is the latest version available today?
    20.8 +current_version()
    20.9 +{
   20.10 +	wget -O - https://sourceforge.net/projects/qtgain/files/QtGain/ 2>/dev/null | \
   20.11 +	sed '/scope="row/!d;s|.*href="|"https://sourceforge.net|;q' | xargs wget -O - 2>/dev/null | \
   20.12 +	sed '/scope="row/!d;s|.*/QtGain/||;s|/.*||;q'
   20.13 +}
   20.14 +
   20.15  # Rules to configure and make the package.
   20.16  compile_rules()
   20.17  {

    21.1 --- a/qtwebkit/receipt	Wed Feb 23 11:28:45 2022 +0100
    21.2 +++ b/qtwebkit/receipt	Wed Feb 23 11:49:52 2022 +0000
    21.3 @@ -18,6 +18,13 @@
    21.4  BUILD_DEPENDS="Qt4-dev libQtDeclarative qmake bison flex gperf ruby-dev mesa-dev \
    21.5  sqlite-dev libpng-dev jpeg-dev gstreamer-dev gst-plugins-base-dev gst-plugins-base"
    21.6  
    21.7 +# What is the latest version available today?
    21.8 +current_version()
    21.9 +{
   21.10 +	wget -O - https://github.com/qtwebkit/qtwebkit/tags 2>/dev/null | \
   21.11 +	sed '/archive.*tar/!d;s|.*/[a-z-]*\(.*\).tar.*|\1|;q'
   21.12 +}
   21.13 +
   21.14  compile_rules()
   21.15  {
   21.16  	sed 's|FixedFont, default.*$|FixedFont, QLatin1String("monospace"));|' -i \

    22.1 --- a/quarry/receipt	Wed Feb 23 11:28:45 2022 +0100
    22.2 +++ b/quarry/receipt	Wed Feb 23 11:49:52 2022 +0000
    22.3 @@ -14,6 +14,13 @@
    22.4  DEPENDS="gtk+ librsvg libgsf xcb-util"
    22.5  BUILD_DEPENDS="gtk+-dev librsvg-dev libgsf"
    22.6  
    22.7 +# What is the latest version available today?
    22.8 +current_version()
    22.9 +{
   22.10 +	wget -O - https://github.com/ejona86/quarry/tags 2>/dev/null | \
   22.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
   22.12 +}
   22.13 +
   22.14  # Rules to configure and make the package.
   22.15  compile_rules()
   22.16  {

    23.1 --- a/raine/receipt	Wed Feb 23 11:28:45 2022 +0100
    23.2 +++ b/raine/receipt	Wed Feb 23 11:49:52 2022 +0000
    23.3 @@ -14,6 +14,13 @@
    23.4  DEPENDS="libsdl zlib libpng libsdl-image liblzma libsdl-ttf muparser mesa"
    23.5  BUILD_DEPENDS="libsdl-dev zlib-dev libpng-dev nasm libsdl-image-dev liblzma-dev libsdl-ttf-dev muparser-dev mesa-dev"
    23.6  
    23.7 +# What is the latest version available today?
    23.8 +current_version()
    23.9 +{
   23.10 +	wget -O - https://github.com/zelurker/raine/tags 2>/dev/null | \
   23.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
   23.12 +}
   23.13 +
   23.14  # Rules to configure and make the package.
   23.15  compile_rules()
   23.16  {

    24.1 --- a/rhino/receipt	Wed Feb 23 11:28:45 2022 +0100
    24.2 +++ b/rhino/receipt	Wed Feb 23 11:49:52 2022 +0000
    24.3 @@ -16,6 +16,13 @@
    24.4  
    24.5  SUGGESTED="java-jre"
    24.6  
    24.7 +# What is the latest version available today?
    24.8 +current_version()
    24.9 +{
   24.10 +	wget -O - https://github.com/mozilla/rhino/releases 2>/dev/null | \
   24.11 +	sed '/archive.*tar/!d;s|.*/Rhino\(.*\)_Release.tar.*|\1|;s|_|.|g;q'
   24.12 +}
   24.13 +
   24.14  # Rules to configure and make the package.
   24.15  compile_rules()
   24.16  {

    25.1 --- a/rlog/receipt	Wed Feb 23 11:28:45 2022 +0100
    25.2 +++ b/rlog/receipt	Wed Feb 23 11:49:52 2022 +0000
    25.3 @@ -13,6 +13,13 @@
    25.4  
    25.5  DEPENDS="gcc-lib-base"
    25.6  
    25.7 +# What is the latest version available today?
    25.8 +current_version()
    25.9 +{
   25.10 +	wget -O - https://raw.githubusercontent.com/vgough/rlog/master/ChangeLog 2>/dev/null | \
   25.11 +	sed '/version to/!d;s|.*bump version to ||;s|,.*||;q'
   25.12 +}
   25.13 +
   25.14  # Rules to configure and make the package.
   25.15  compile_rules()
   25.16  {

    26.1 --- a/rogue/receipt	Wed Feb 23 11:28:45 2022 +0100
    26.2 +++ b/rogue/receipt	Wed Feb 23 11:49:52 2022 +0000
    26.3 @@ -13,6 +13,13 @@
    26.4  DEPENDS="ncurses"
    26.5  BUILD_DEPENDS="ncurses-dev"
    26.6  
    26.7 +# What is the latest version available today?
    26.8 +current_version()
    26.9 +{
   26.10 +	wget -O - https://github.com/Davidslv/rogue/releases 2>/dev/null | \
   26.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
   26.12 +}
   26.13 +
   26.14  # Rules to configure and make the package.
   26.15  compile_rules()
   26.16  {

    27.1 --- a/scalpel/receipt	Wed Feb 23 11:28:45 2022 +0100
    27.2 +++ b/scalpel/receipt	Wed Feb 23 11:49:52 2022 +0000
    27.3 @@ -10,6 +10,13 @@
    27.4  WEB_SITE="http://www.digitalforensicssolutions.com/Scalpel"
    27.5  WGET_URL="$WEB_SITE/$TARBALL"
    27.6  
    27.7 +# What is the latest version available today?
    27.8 +current_version()
    27.9 +{
   27.10 +	wget -O - https://raw.githubusercontent.com/sleuthkit/scalpel/master/Changelog 2>/dev/null | \
   27.11 +	sed '/^[0-9]/!d;s|[^0-9\.].*||' | sort -Vr | sed q
   27.12 +}
   27.13 +
   27.14  # Rules to configure and make the package.
   27.15  compile_rules()
   27.16  {

    28.1 --- a/schroedinger/receipt	Wed Feb 23 11:28:45 2022 +0100
    28.2 +++ b/schroedinger/receipt	Wed Feb 23 11:49:52 2022 +0000
    28.3 @@ -13,6 +13,13 @@
    28.4  DEPENDS="orc"
    28.5  BUILD_DEPENDS="orc-dev"
    28.6  
    28.7 +# What is the latest version available today?
    28.8 +current_version()
    28.9 +{
   28.10 +	wget -O - https://github.com/Distrotech/dirac/tags 2>/dev/null | \
   28.11 +	sed '/schroedinger/!d;/archive.*tar/!d;s|.*/[a-z-]*\(.*\).tar.*|\1|;q'
   28.12 +}
   28.13 +
   28.14  # Rules to configure and make the package.
   28.15  compile_rules()
   28.16  {

    29.1 --- a/scrot/receipt	Wed Feb 23 11:28:45 2022 +0100
    29.2 +++ b/scrot/receipt	Wed Feb 23 11:49:52 2022 +0000
    29.3 @@ -14,6 +14,14 @@
    29.4  xorg-libXau xorg-libXdmcp xorg-libXext zlib"
    29.5  BUILD_DEPENDS="patch giblib-dev imlib2-dev xorg-libX11-dev"
    29.6  
    29.7 +# What is the latest version available today?
    29.8 +current_version()
    29.9 +{
   29.10 +	# https://github.com/resurrecting-open-source-projects/scrot/releases
   29.11 +	wget -O - https://github.com/dreamer/scrot/releases 2>/dev/null | \
   29.12 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
   29.13 +}
   29.14 +
   29.15  # Rules to configure and make the package.
   29.16  compile_rules()
   29.17  {

    30.1 --- a/sloccount/receipt	Wed Feb 23 11:28:45 2022 +0100
    30.2 +++ b/sloccount/receipt	Wed Feb 23 11:49:52 2022 +0000
    30.3 @@ -7,11 +7,18 @@
    30.4  MAINTAINER="pascal.bellard@slitaz.org"
    30.5  LICENSE="GPL2"
    30.6  TARBALL="$PACKAGE-$VERSION.tar.gz"
    30.7 -WEB_SITE="https://www.dwheeler.com/sloccount/"
    30.8 +WEB_SITE="https://dwheeler.com/sloccount/"
    30.9  WGET_URL="${WEB_SITE}$TARBALL"
   30.10  
   30.11  DEPENDS="perl"
   30.12  
   30.13 +# What is the latest version available today?
   30.14 +current_version()
   30.15 +{
   30.16 +	wget -O - $WEB_SITE 2>/dev/null | \
   30.17 +	sed '/latest/!d;s|.*version ||;s| .*||;q'
   30.18 +}
   30.19 +
   30.20  # Rules to configure and make the package.
   30.21  compile_rules()
   30.22  {

    31.1 --- a/synergy/receipt	Wed Feb 23 11:28:45 2022 +0100
    31.2 +++ b/synergy/receipt	Wed Feb 23 11:49:52 2022 +0000
    31.3 @@ -13,6 +13,13 @@
    31.4  DEPENDS="xorg-libX11 xorg-libXtst xorg-libSM xorg-libICE xorg-libXinerama gcc-lib-base"
    31.5  BUILD_DEPENDS="xorg-dev-proto xorg-libXt-dev xorg-libXtst-dev cmake"
    31.6  
    31.7 +# What is the latest version available today?
    31.8 +current_version()
    31.9 +{
   31.10 +	wget -O - https://github.com/symless/synergy-core/releases 2>/dev/null | \
   31.11 +	sed '/stable/!d;/archive.*tar/!d;s|.*/v*\(.*\)-stable.tar.*|\1|;q'
   31.12 +}
   31.13 +
   31.14  # Rules to configure and make the package.
   31.15  compile_rules()
   31.16  {		

    32.1 --- a/tokyocabinet/receipt	Wed Feb 23 11:28:45 2022 +0100
    32.2 +++ b/tokyocabinet/receipt	Wed Feb 23 11:49:52 2022 +0000
    32.3 @@ -14,6 +14,13 @@
    32.4  DEPENDS="bzlib zlib"
    32.5  BUILD_DEPENDS="bzip2-dev zlib-dev"
    32.6  
    32.7 +# What is the latest version available today?
    32.8 +current_version()
    32.9 +{
   32.10 +	wget -O - https://dbmx.net/tokyocabinet/index.html 2>/dev/null | \
   32.11 +	sed '/Latest Source/!d;s|.*tokyocabinet-||;s|.tar.*||;q'
   32.12 +}
   32.13 +
   32.14  # Rules to configure and make the package.
   32.15  compile_rules()
   32.16  {

    33.1 --- a/truecrypt/receipt	Wed Feb 23 11:28:45 2022 +0100
    33.2 +++ b/truecrypt/receipt	Wed Feb 23 11:49:52 2022 +0000
    33.3 @@ -13,6 +13,13 @@
    33.4  DEPENDS="fuse wxWidgets28 xorg-libSM dmsetup linux-md"
    33.5  BUILD_DEPENDS="pkcs nasm fuse-dev wxWidgets28-dev xorg-libSM-dev"
    33.6  
    33.7 +# What is the latest version available today?
    33.8 +current_version()
    33.9 +{
   33.10 +	wget -O - https://sourceforge.net/projects/truecrypt/files/TrueCrypt/Other/ 2>/dev/null | \
   33.11 +	sed '/source-unix.tar/!d;s|.source-unix.tar.*||;s|.*TrueCrypt-||;q'
   33.12 +}
   33.13 +
   33.14  # Rules to configure and make the package.
   33.15  compile_rules()
   33.16  {

    34.1 --- a/tupi/receipt	Wed Feb 23 11:28:45 2022 +0100
    34.2 +++ b/tupi/receipt	Wed Feb 23 11:49:52 2022 +0000
    34.3 @@ -14,6 +14,13 @@
    34.4  BUILD_DEPENDS="ruby-dev Qt4-dev qmake ffmpeg-dev zlib-dev quazip-dev mesa-dev \
    34.5  libogg-dev libtheora-dev libgnutls"
    34.6  
    34.7 +# What is the latest version available today?
    34.8 +current_version()
    34.9 +{
   34.10 +	wget -O - https://sourceforge.net/projects/tupi2d/files/Source%20Code/ 2>/dev/null | \
   34.11 +	sed '/tupi-/!d;/tar.gz/!d;s|.tar.gz.*||;s|.*tupi-||;q'
   34.12 +}
   34.13 +
   34.14  # Rules to configure and make the package.
   34.15  compile_rules()
   34.16  {

    35.1 --- a/tuxtype/receipt	Wed Feb 23 11:28:45 2022 +0100
    35.2 +++ b/tuxtype/receipt	Wed Feb 23 11:49:52 2022 +0000
    35.3 @@ -17,6 +17,13 @@
    35.4  libsdl-mixer-dev libsdl-ttf-dev libsdl-net-dev libsdl-pango-dev wget"
    35.5  TAGS="education"
    35.6  
    35.7 +# What is the latest version available today?
    35.8 +current_version()
    35.9 +{
   35.10 +	wget -O - https://github.com/tux4kids/tuxtype/tags 2>/dev/null | \
   35.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
   35.12 +}
   35.13 +
   35.14  # Rules to configure and make the package.
   35.15  compile_rules()
   35.16  {

    36.1 --- a/unrar/receipt	Wed Feb 23 11:28:45 2022 +0100
    36.2 +++ b/unrar/receipt	Wed Feb 23 11:49:52 2022 +0000
    36.3 @@ -13,6 +13,13 @@
    36.4  
    36.5  DEPENDS="gcc-lib-base"
    36.6  
    36.7 +# What is the latest version available today?
    36.8 +current_version()
    36.9 +{
   36.10 +	wget -O - https://github.com/baulk/unrar/releases 2>/dev/null | \
   36.11 +	sed '/archive.*tar/!d;s|.*/v*\(.*\).tar.*|\1|;q'
   36.12 +}
   36.13 +
   36.14  # Rules to configure and make the package.
   36.15  compile_rules()
   36.16  {

    37.1 --- a/vkeybd/receipt	Wed Feb 23 11:28:45 2022 +0100
    37.2 +++ b/vkeybd/receipt	Wed Feb 23 11:49:52 2022 +0000
    37.3 @@ -13,6 +13,13 @@
    37.4  DEPENDS="tk tcl alsa-lib xorg-libX11"
    37.5  BUILD_DEPENDS="tk-dev tcl-dev alsa-lib-dev xorg-libX11-dev"
    37.6  
    37.7 +# What is the latest version available today?
    37.8 +current_version()
    37.9 +{
   37.10 +	wget -O - https://raw.githubusercontent.com/tiwai/vkeybd/master/README 2>/dev/null | \
   37.11 +	sed '/VIRTUAL/!d;s|.*ver.||;q'
   37.12 +}
   37.13 +
   37.14  # Rules to configure and make the package.
   37.15  compile_rules()
   37.16  {

    38.1 --- a/wayland/receipt	Wed Feb 23 11:28:45 2022 +0100
    38.2 +++ b/wayland/receipt	Wed Feb 23 11:49:52 2022 +0000
    38.3 @@ -21,6 +21,13 @@
    38.4  	arm*) ARCH_ARGS="--disable-scanner" ;;
    38.5  esac
    38.6  
    38.7 +# What is the latest version available today?
    38.8 +current_version()
    38.9 +{
   38.10 +	wget -O - 'https://gitlab.freedesktop.org/wayland/wayland/-/tags?sort=updated_desc' 2>/dev/null | \
   38.11 +	sed '/item-title/!d;s|.*">||;s|<.*||;q'
   38.12 +}
   38.13 +
   38.14  # Rules to configure and make the package.
   38.15  compile_rules()
   38.16  {

    39.1 --- a/weston/receipt	Wed Feb 23 11:28:45 2022 +0100
    39.2 +++ b/weston/receipt	Wed Feb 23 11:49:52 2022 +0000
    39.3 @@ -16,6 +16,13 @@
    39.4  libunwind-dev mtdev-dev xorg-libXcursor-dev pam-dev liblzma-dev \
    39.5  gegl-dev libdrm-dev xorg-libXxf86vm-dev udev-dev pkg-config jpeg-dev file"
    39.6  
    39.7 +# What is the latest version available today?
    39.8 +current_version()
    39.9 +{
   39.10 +	wget -O - 'https://gitlab.freedesktop.org/wayland/weston/-/tags?sort=updated_desc' 2>/dev/null | \
   39.11 +	sed '/item-title/!d;s|.*">||;s|<.*||;q'
   39.12 +}
   39.13 +
   39.14  # Rules to configure and make the package.
   39.15  compile_rules()
   39.16  {

    40.1 --- a/xscavenger/receipt	Wed Feb 23 11:28:45 2022 +0100
    40.2 +++ b/xscavenger/receipt	Wed Feb 23 11:49:52 2022 +0000
    40.3 @@ -16,6 +16,13 @@
    40.4  DEPENDS="alsa-lib xorg"
    40.5  BUILD_DEPENDS="alsa-lib-dev xorg-imake xorg-dev"
    40.6  
    40.7 +# What is the latest version available today?
    40.8 +current_version()
    40.9 +{
   40.10 +	wget -O - https://www.linuxmotors.com/linux/scavenger/index.html 2>/dev/null | \
   40.11 +	sed "/latest/d;/$PACKAGE-[0-9]/!d;/tgz/!d;s|.*$PACKAGE-\\(.*\\).tgz.*|\\1|" | sort -Vr | sed q
   40.12 +}
   40.13 +
   40.14  # Rules to configure and make the package.
   40.15  compile_rules()
   40.16  {