wok-next annotate linux/receipt @ rev 12812

linux: up to 3.2.14 for ARM arch
author Christophe Lincoln <pankso@slitaz.org>
date Sun May 20 03:10:40 2012 +0200 (2012-05-20)
parents 2b28b3fc0a64
children e0a72cb63515
rev   line source
pankso@3 1 # SliTaz package receipt.
pankso@3 2
pankso@3 3 PACKAGE="linux"
pankso@12812 4 VERSION="3.2.14"
pankso@12812 5 KBASEVER="${VERSION:0:3}"
pankso@3 6 CATEGORY="base-system"
pankso@3 7 SHORT_DESC="The Linux kernel and modules."
pankso@3864 8 MAINTAINER="devel@slitaz.org"
pankso@12812 9 TARBALL="$PACKAGE-$KBASEVER.tar.xz"
pankso@3 10 WEB_SITE="http://www.kernel.org/"
pankso@12285 11 WGET_URL="http://www.kernel.org/pub/linux/kernel/v3.0/$TARBALL"
pankso@12803 12 HOST_ARCH="i486 arm x86_64"
pankso@12803 13
pankso@12812 14 DEPENDS="kmod"
pankso@12812 15 BUILD_DEPENDS="slitaz-toolchain perl git xz lzma patch uclibc-cross-compiler-x86_64"
pankso@12812 16 [ "$KBASEVER" != "$VERSION" ] && PATCH="http://www.kernel.org/pub/linux/kernel/v3.0/patch-$VERSION.xz"
pankso@12812 17
pankso@12803 18 # Aufs enable chroot
pascal@12625 19 AUFS_NOT_SUPPORTED="uclibc-cross-compiler-x86_64 is not compatible with aufs 8("
pankso@3 20
pankso@12803 21 # This will save/restore the modules.dep but we want to regenerate it
pankso@12803 22 # on install/upgrade.
pankso@12803 23 #CONFIG_FILES="/lib/modules/$KBASEVER-slitaz/modules.dep"
pankso@12803 24
pankso@12803 25 case "$ARCH" in
pankso@12803 26 arm)
pankso@12803 27 # Old school way :-) Until ARM was tested on real hardware and
pankso@12803 28 # we know wich modules/features we realy need for ARM machines.
pankso@12803 29 # No deps on kmod since we use Busybox modutils for ARM.
pankso@12812 30 #TARBALL="$PACKAGE-$VERSION.tar.bz2"
pankso@12812 31 DEPENDS=""
pankso@12812 32 BUILD_DEPENDS="xz" ;;
pankso@12803 33 esac
pankso@9731 34
pankso@3 35 # Rules to configure and make the package.
pankso@3 36 compile_rules()
pankso@3 37 {
pankso@9731 38 cd $src
pankso@12803 39
pankso@12803 40 case "$ARCH" in
pankso@12803 41 arm)
pankso@12803 42 echo "Compiling: ARM Kernel"
pankso@12812 43 if [ ! -f $SRC/$(basename $PATCH) ]; then
pankso@12812 44 wget $PATCH -O $SRC/$(basename $PATCH)
pankso@12812 45 fi
pankso@12803 46 make mrproper &&
pankso@12812 47 xzcat $SRC/$(basename $PATCH) | patch -Np1
pankso@12803 48 cp -f $stuff/$ARCH/linux-slitaz.config .config &&
pankso@12803 49 make ARCH=$ARCH CROSS_COMPILE=${HOST_SYSTEM}- bzImage &&
pankso@12803 50 make ARCH=$ARCH CROSS_COMPILE=${HOST_SYSTEM}- modules &&
pankso@12803 51 make ARCH=$ARCH CROSS_COMPILE=${HOST_SYSTEM}- \
pankso@12803 52 INSTALL_MOD_PATH=$DESTDIR modules_install &&
pankso@12803 53 mkdir -p $DESTDIR/boot &&
pankso@12803 54 mv arch/arm/boot/compressed/vmlinux \
pankso@12803 55 $DESTDIR/boot/linux-$VERSION-slitaz-$ARCH
pankso@12803 56 return 0 ;;
pankso@12803 57 x86_64)
pankso@12803 58 echo "TODO: Maybe use default ? But cross compile in x86_64 chroot"
pankso@12803 59 echo "so we can remove the 64 build by uclibc-cross-compiler-x86_64"
pankso@12803 60 return 0 ;;
pankso@12803 61 esac
pankso@12803 62
slaxemulator@7131 63 # this is code to help update the kernel version faster
slaxemulator@7131 64 #for i in $(grep -l 'WANTED="linux"' $WOK/*/receipt)
slaxemulator@7131 65 #do
slaxemulator@7131 66 # sed -i 's|VERSION="OLDVERSION"|VERSION="NEWVERSION"|g' $i
slaxemulator@7131 67 #done
slaxemulator@8616 68
gokhlayeh@11395 69 [ ! -x /usr/bin/cook ] && report open-bloc
pankso@9731 70
pankso@9731 71 # Check for Aufs and cook it if unbuilt.
pankso@9731 72 echo "Checking for Aufs packages..."
pankso@12285 73 _AUFSVER=`grep ^VERSION= $WOK/aufs/receipt | cut -d "=" -f2 | sed -e 's/"//g'`
pankso@12285 74 if [ -x /usr/bin/cook ]; then
gokhlayeh@11395 75 # Give info an redirect to /dev/null since aufs got it own log.
gokhlayeh@11395 76 AUFSDIR=$WOK/aufs/source/aufs-${_AUFSVER}
pankso@12285 77 [ -d "$AUFSDIR" ] && rm -rf $AUFSDIR
pankso@12285 78 #echo "Cook: aufs $_AUFSVER"
pankso@12288 79 cook aufs --getsrc
pankso@12288 80 mkdir -p $WOK/aufs/source/
pankso@12289 81 tar xjf $SRC/aufs-${_AUFSVER}.tar.bz2 -C $WOK/aufs/source/
pankso@12285 82 elif [ -x /usr/bin/tazwok ]; then
pankso@12285 83 # we just need aufs source. Also cooking now is a bad idea since it
pankso@12285 84 # needs linux-module-headers. The one your cooking not the one from the web.
gokhlayeh@11395 85 AUFSDIR=$WOK/aufs/aufs-${_AUFSVER}
gokhlayeh@11395 86 [ -d "$AUFSDIR" ] && rm -rf $AUFSDIR
gokhlayeh@11395 87 tazwok get-src aufs --target=$AUFSDIR || { report close-bloc; return 1; }
pankso@9731 88 fi
pankso@12285 89 echo "cook:linux" > $command
pankso@12285 90
pankso@9731 91 echo "Copying Aufs files and patches..."
slaxemulator@7297 92 cp -a $AUFSDIR/Documentation $AUFSDIR/fs $AUFSDIR/include $src
pankso@12285 93 cp -a $AUFSDIR/aufs3-*.patch $stuff
pankso@12285 94
pankso@4251 95 # SliTaz db
pankso@12285 96 [ -d $WOK/$PACKAGE/source/slitaz ] && rm -rf $WOK/$PACKAGE/source/slitaz 2> /dev/null
pankso@12285 97 mkdir -p $WOK/$PACKAGE/source/slitaz
pankso@12290 98 echo "$WGET_URL" > $WOK/$PACKAGE/source/slitaz/url
pankso@12285 99 cp $stuff/gztazmod.sh $stuff/list_modules.sh $WOK/$PACKAGE/source/slitaz
pankso@12285 100 cp $stuff/bootloader.sh $WOK/$PACKAGE/source/slitaz
pankso@12803 101
pankso@5640 102 # Apply patches
pankso@9731 103 echo "Applying patches..."
pascal@521 104 while read patch_file; do
pankso@12285 105 echo "$patch_file" >> $WOK/$PACKAGE/source/slitaz/patches
pankso@12285 106 cp $stuff/$patch_file $WOK/$PACKAGE/source/slitaz
pascal@1442 107 if [ -f done.$patch_file ]; then
pascal@1442 108 echo "Skipping $patch_file"
pascal@1442 109 continue
pascal@1442 110 fi
pascal@521 111 echo "Apply $patch_file"
pankso@12285 112 if [ -x /usr/bin/cook ]; then
pankso@12285 113 patch -p1 < $WOK/$PACKAGE/source/slitaz/$patch_file || return 1
pankso@12285 114 elif [ -x /usr/bin/tazwok ]; then
pankso@12285 115 patch -p1 < $WOK/$PACKAGE/source/slitaz/$patch_file || { report close-bloc; return 1; }
pankso@12285 116 fi
pascal@1442 117 touch done.$patch_file
pascal@521 118 done <<EOT
pankso@12285 119 $PACKAGE-diff.u
pankso@12285 120 $PACKAGE-header.u
pankso@12285 121 $PACKAGE-freeinitrd.u
pankso@12285 122 aufs3-base.patch
pankso@12285 123 aufs3-standalone.patch
pankso@12285 124 aufs3-loopback.patch
pankso@12285 125 aufs3-proc_map.patch
pankso@12285 126 channel-negative-one-maxim.patch
pankso@12285 127 mac80211.compat08082009.wl_frag+ack_v1.patch
pascal@521 128 EOT
pankso@9731 129
pankso@12285 130 if [ "$KBASEVER" != "$VERSION" ]; then
pankso@12285 131 if [ -f $SOURCES_REPOSITORY/$(basename $PATCH) ]; then
pankso@12285 132 xzcat $SOURCES_REPOSITORY/$(basename $PATCH) | patch -Np1
pankso@12285 133 touch done.patch-$VERSION
pankso@12285 134 else
pankso@12285 135 wget $PATCH -O $SRC/$(basename $PATCH)
pankso@12285 136 xzcat $SRC/$(basename $PATCH) | patch -Np1
pankso@12285 137 touch done.patch-$VERSION
pankso@12285 138 fi
pankso@12285 139 fi
pankso@12285 140
pankso@12285 141 sed -i 's|SUBLEVEL =.*|SUBLEVEL =|g' Makefile
pankso@12285 142
gokhlayeh@11395 143 [ ! -x /usr/bin/cook ] && report step "Make kernel proper and then build lguest"
pankso@12294 144 [ -x /usr/bin/cook ] && echo "Make kernel proper and then build lguest"
pankso@3864 145 make mrproper
pankso@12285 146 cd Documentation/virtual/lguest
pankso@12285 147 if [ -x /usr/bin/cook ]; then
pankso@12285 148 make lguest || return 1
pankso@12285 149 elif [ -x /usr/bin/tazwok ]; then
pankso@12285 150 make lguest || { report close-bloc; return 1; }
pankso@12285 151 fi
slaxemulator@8681 152 cd $src
pankso@12803 153
pascal@12570 154 case "$opt" in
pascal@12570 155 *--no64*);;
pascal@12570 156 *)
pankso@12294 157 #
pankso@12294 158 # Arch x86_64
pankso@12294 159 #
pankso@12294 160 [ ! -x /usr/bin/cook ] && report step "Make bzImage64 without modules first"
pankso@12294 161 [ -x /usr/bin/cook ] && echo "Building x86_64 Kernel"
pankso@12803 162
pankso@12285 163 # Build bzImage64 without modules first
pascal@12293 164 cp -f $stuff/$PACKAGE-slitaz.config64 .config
pankso@12285 165 sed -i 's/CONFIG_MODULES=y/# CONFIG_MODULES is not set/' .config
pankso@12803 166
pankso@12803 167 # We can't keep every driver in staging
pankso@12285 168 sed -i -e 's/^CONFIG_RTL8192/#&/' \
pankso@12285 169 -e 's/^CONFIG_R8187SE/#&/' \
pankso@12285 170 -e 's/^CONFIG_RT2870/#&/' .config
pankso@12285 171 yes '' | make ARCH=x86_64 oldconfig
pankso@12285 172 if [ -x /usr/bin/cook ]; then
pankso@12285 173 make -j 4 ARCH=x86_64 CROSS_COMPILE=uclibc-x86_64- bzImage || exit 1
pankso@12285 174 elif [ -x /usr/bin/tazwok ]; then
pankso@12285 175 make -j 4 ARCH=x86_64 CROSS_COMPILE=uclibc-x86_64- bzImage || { report close-bloc; return 1; }
pankso@12285 176 fi
pankso@12285 177 [ -d $PWD/_pkg ] || mkdir -p $DESTDIR/linux64
pankso@12285 178 mv arch/x86/boot/bzImage $DESTDIR/linux64
pankso@12285 179 mv System.map System.map-without-modules64
pankso@12285 180
pankso@12285 181 [ ! -x /usr/bin/cook ] && report step "Now build bzImage64 with modules"
pankso@12803 182
pankso@12285 183 # Build bzImage64 with modules
pascal@12293 184 cp -f $stuff/$PACKAGE-slitaz.config64 .config
pankso@12285 185 #make ARCH=x86_64 oldconfig
pankso@12285 186 ln .config $WOK/$PACKAGE/slitaz/config64
pankso@12285 187 make -j 4 ARCH=x86_64 CROSS_COMPILE=uclibc-x86_64- bzImage &&
pankso@12285 188 make -j 4 ARCH=x86_64 CROSS_COMPILE=uclibc-x86_64- modules &&
pankso@12285 189 make ARCH=x86_64 INSTALL_MOD_PATH=$DESTDIR/linux64 modules_install &&
pankso@12285 190 make ARCH=x86_64 INSTALL_HDR_PATH=$DESTDIR/linux64/usr headers_install &&
pankso@12285 191 if [ -x /usr/bin/cook ]; then
pankso@12285 192 [ -s arch/x86/boot/bzImage ] || return 1
pankso@12285 193 elif [ -x /usr/bin/tazwok ]; then
pankso@12285 194 [ -s arch/x86/boot/bzImage ] || { report close-bloc; return 1; }
pankso@12285 195 fi
pankso@12285 196 mkdir -p $DESTDIR/linux64/boot 2> /dev/null
pankso@12285 197 mv arch/x86/boot/bzImage $DESTDIR/linux64/boot/vmlinuz-$VERSION-slitaz
pankso@12285 198 ln System.map System.map-modules64
pankso@12285 199 ln Module.symvers Module.symvers-modules64
pascal@12570 200 esac
pankso@12803 201
pankso@12294 202 #
pankso@12294 203 # Standard kernel
pankso@12294 204 #
pankso@12294 205 [ ! -x /usr/bin/cook ] && report step "Make bzImage without modules first"
pankso@12294 206 [ -x /usr/bin/cook ] && echo "Building standard kernel..."
pankso@12803 207
pankso@12294 208 # Build bzImage without modules first
pankso@12294 209 cp -f $stuff/$PACKAGE-slitaz.config .config
pankso@12294 210 sed -i 's/CONFIG_MODULES=y/# CONFIG_MODULES is not set/' .config
pankso@12803 211
pankso@12803 212 # We can't keep every driver in staging
pankso@12294 213 sed -i -e 's/^CONFIG_RTL8192/#&/' \
pankso@12294 214 -e 's/^CONFIG_R8187SE/#&/' \
pankso@12294 215 -e 's/^CONFIG_RT2870/#&/' .config
pankso@12294 216 yes '' | make oldconfig
pankso@12294 217 if [ -x /usr/bin/cook ]; then
pankso@12294 218 make -j 4 bzImage || exit 1
pankso@12294 219 elif [ -x /usr/bin/tazwok ]; then
pankso@12294 220 make -j 4 bzImage || { report close-bloc; return 1; }
pankso@12294 221 fi
pankso@12294 222 [ -d $DESTDIR ] || mkdir -p $DESTDIR
pankso@12294 223 mv arch/x86/boot/bzImage $DESTDIR
pankso@12294 224 mv System.map System.map-without-modules
pankso@12294 225
pankso@12294 226 [ ! -x /usr/bin/cook ] && report step "Now build bzImage with modules"
pankso@12803 227
pankso@12294 228 # Build bzImage with modules
pankso@12294 229 cp -f $stuff/$PACKAGE-slitaz.config .config
pankso@12294 230 #make oldconfig
pankso@12294 231 ln .config $WOK/$PACKAGE/source/slitaz/config
pankso@12294 232 make -j 4 bzImage &&
pankso@12294 233 make -j 4 modules &&
pankso@12294 234 make INSTALL_MOD_PATH=$DESTDIR modules_install &&
pankso@12294 235 make INSTALL_HDR_PATH=$DESTDIR/usr headers_install &&
pankso@12294 236 if [ -x /usr/bin/cook ]; then
pankso@12294 237 [ -s arch/x86/boot/bzImage ] || return 1
pankso@12294 238 elif [ -x /usr/bin/tazwok ]; then
pankso@12294 239 [ -s arch/x86/boot/bzImage ] || { report close-bloc; return 1; }
pankso@12294 240 fi
pankso@12294 241 mkdir -p $DESTDIR/boot 2> /dev/null
pankso@12294 242 mv arch/x86/boot/bzImage $DESTDIR/boot/vmlinuz-$VERSION-slitaz
pankso@12803 243
gokhlayeh@11395 244 [ ! -x /usr/bin/cook ] && report step "Compressing all modules"
pankso@12803 245
slaxemulator@6719 246 # Compress all modules.
pankso@12285 247 $stuff/gztazmod.sh $DESTDIR/lib/modules/$KBASEVER-slitaz
pankso@12285 248 $stuff/gztazmod.sh $DESTDIR/linux64/lib/modules/$KBASEVER-slitaz
pascal@7667 249 ln System.map System.map-modules
pascal@7667 250 ln Module.symvers Module.symvers-modules
pankso@12803 251
gokhlayeh@11395 252 if [ ! -x /usr/bin/cook ]; then
gokhlayeh@11395 253 report close-bloc
gokhlayeh@11395 254 fi
pankso@3864 255 }
erjo@253 256
pankso@3 257 # Rules to gen a SliTaz package suitable for Tazpkg.
pankso@3 258 genpkg_rules()
pankso@3 259 {
pankso@12803 260 case "$ARCH" in
pankso@12803 261 arm)
pankso@12803 262 echo "Packing: ARM Kernel"
pankso@12803 263 cp -a $install/* $fs
pankso@12803 264 rm -f $fs/lib/modules/*/build $fs/lib/modules/*/source
pankso@12803 265 return 0 ;;
pankso@12803 266 x86_64)
pankso@12803 267 echo "TODO: use default or custom x86_64 packing"
pankso@12803 268 return 0 ;;
pankso@12803 269 esac
pankso@12803 270
pascal@12300 271 export PACKAGE VERSION
pascal@521 272 local path
pascal@7656 273 cp -a $_pkg/boot $fs
pankso@3 274 # Compress all modules.
pascal@12558 275 $stuff/gztazmod.sh $_pkg/lib/modules/$KBASEVER-slitaz
pankso@12285 276 path=$fs/lib/modules/$KBASEVER-slitaz/kernel
pascal@521 277 mkdir -p $path
pankso@12285 278 cp -a $_pkg/lib/modules/$KBASEVER-slitaz/mo* \
pankso@12285 279 $fs/lib/modules/$KBASEVER-slitaz
pankso@5640 280 # Get the base modules
pascal@886 281 export src
pascal@886 282 export _pkg
pankso@12285 283 mkdir -p $WOK/$PACKAGE/source/tmp
slaxemulator@9701 284 $stuff/list_modules.sh \
pankso@12285 285 $(cat $stuff/modules.list) > $WOK/$PACKAGE/source/tmp/modules.list
pankso@3864 286 while read module; do
pascal@521 287 dir=$(dirname $module)
pankso@535 288 [ -d $path/$dir ] || mkdir -p $path/$dir
pankso@12285 289 cp -a $_pkg/lib/modules/$KBASEVER-slitaz/kernel/$module $path/$dir
pankso@12285 290 done < $WOK/$PACKAGE/source/tmp/modules.list
pascal@397 291 # Remove unresolved links
pankso@12285 292 rm -f $fs/lib/modules/$KBASEVER-slitaz/build
pankso@12285 293 rm -f $fs/lib/modules/$KBASEVER-slitaz/source
pankso@12285 294 # Cook all packages with a kernel module
pankso@12285 295 for i in $(cd $WOK; grep -l 'tazwok cook linux$' */receipt)
pankso@12285 296 do
pankso@12285 297 echo tazwok cook ${i%/receipt}
pankso@12285 298 done
pankso@12285 299 # Fixed modules.dep to use right path
pankso@12285 300 # saves 100kb of space too
pankso@12285 301 sed -i "s|$_pkg||g" $fs/lib/modules/$KBASEVER-slitaz/modules.dep
pankso@12285 302 sed -i "s|99.98.$KBASEVER-slitaz|$KBASEVER-slitaz|g" $fs/lib/modules/$KBASEVER-slitaz/modules.dep
pankso@12803 303 # Check and echo any module in kernel .config that's not added to
pankso@5640 304 # one of linux-* pkgs
pankso@12803 305 $stuff/check_modules.sh
pankso@3 306 }
pankso@3 307
pankso@3 308 # Pre and post install commands for Tazpkg.
pankso@3 309 post_install()
pankso@3 310 {
pascal@521 311 echo "Processing post-install commands..."
pankso@12803 312 case "$ARCH" in
pankso@12803 313 arm)
pankso@12803 314 echo "Kernel : /boot/linux-$VERSION-slitaz-$ARCH"
pankso@12803 315 echo "Modules: /lib/modules/$VERSION-slitaz"
pankso@12803 316 return 0 ;;
pankso@12803 317 esac
pankso@12285 318 chroot "$1/" depmod -a $KBASEVER-slitaz
pankso@5640 319 # GRUB stuff.
pankso@1154 320 if [ -f "$1/boot/grub/menu.lst" ]; then
pankso@4056 321 root_dev=`cat $1/boot/grub/menu.lst | grep root= | sed 's/.*root=\([^ ]*\).*/\1/' | head -n 1`
pankso@4056 322 grub_dev=`cat $1/boot/grub/menu.lst | grep "root (" | head -n 1`
pankso@3864 323 # Add new kernel entry in case of upgrade for installed system.
pankso@12291 324 if ! grep -q vmlinuz-$VERSION-slitaz $1/boot/grub/menu.lst; then
pankso@4056 325 cat >> $1/boot/grub/menu.lst << EOT
pankso@4056 326
pankso@4056 327 title SliTaz GNU/Linux (Kernel $VERSION-slitaz)
pankso@4056 328 $grub_dev
pankso@4056 329 kernel /boot/vmlinuz-$VERSION-slitaz root=$root_dev
pankso@4056 330 EOT
pankso@4056 331 fi
pankso@4056 332 # Display information message.
pankso@4056 333 cat <<EOT
pankso@4056 334 ----
pankso@4056 335 GRUB is installed, these tree lines must be in your /boot/grub/menu.lst:
pankso@1154 336
pankso@1154 337 title SliTaz GNU/Linux (Kernel $VERSION-slitaz)
pankso@1154 338 $grub_dev
pankso@4056 339 kernel /boot/vmlinuz-$VERSION-slitaz root=$root_dev
pascal@886 340 ----
pascal@886 341 EOT
pankso@1154 342 fi
pankso@3 343 }