SliTaz Repositories

     1.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.2 +++ b/915resolution/description.txt	Thu Apr 23 16:47:39 2015 +0300
     1.3 @@ -0,0 +1,12 @@
     1.4 +915resolution is a tool to modify the video BIOS of the 800 and 900 series Intel
     1.5 +graphics chipsets. This includes the 845G, 855G, and 865G chipsets, as well as
     1.6 +915G, 915GM, and 945G chipsets. This modification is necessary to allow the
     1.7 +display of certain graphics resolutions for an Xorg or XFree86 graphics server.
     1.8 +
     1.9 +915resolution's modifications of the BIOS are transient. There is no risk of
    1.10 +permanent modification of the BIOS. This also means that 915resolution must be
    1.11 +run every time the computer boots inorder for it's changes to take effect.
    1.12 +
    1.13 +915resolution is derived from the tool 855resolution. However, the code
    1.14 +differs substantially. 915resolution's code base is much simpler. 915resolution
    1.15 +also allows the modification of bits per pixel.

     2.1 --- a/915resolution/receipt	Thu Apr 23 15:42:00 2015 +0200
     2.2 +++ b/915resolution/receipt	Thu Apr 23 16:47:39 2015 +0300
     2.3 @@ -3,7 +3,7 @@
     2.4  PACKAGE="915resolution"
     2.5  VERSION="0.5.3"
     2.6  CATEGORY="system-tools"
     2.7 -SHORT_DESC="Widescreen support; modify video BIOS of the 800 and 900 series Intel graphics chipsets"
     2.8 +SHORT_DESC="Intel video BIOS hack to support certain resolutions"
     2.9  MAINTAINER="erjo@slitaz.org"
    2.10  LICENSE="PublicDomain"
    2.11  TARBALL="$PACKAGE-$VERSION.tar.gz"
    2.12 @@ -16,7 +16,6 @@
    2.13  # Rules to configure and make the package.
    2.14  compile_rules()
    2.15  {
    2.16 -	cd $src
    2.17  	for i in widescreen-resolution cedarview ; do
    2.18  		[ -f done.$i ] && continue
    2.19  		patch -p0 < $stuff/$PACKAGE-$VERSION-$i.patch
    2.20 @@ -32,4 +31,3 @@
    2.21  	install $src/$PACKAGE $fs/usr/sbin
    2.22  	install $src/dump_bios $fs/usr/sbin
    2.23  }
    2.24 -

     3.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     3.2 +++ b/dbus/description.txt	Thu Apr 23 16:47:39 2015 +0300
     3.3 @@ -0,0 +1,11 @@
     3.4 +D-Bus is a message bus, used for sending messages between applications.
     3.5 +Conceptually, it fits somewhere in between raw sockets and CORBA in terms of
     3.6 +complexity.
     3.7 +
     3.8 +D-Bus supports broadcast messages, asynchronous messages (thus decreasing
     3.9 +latency), authentication, and more. It is designed to be low-overhead; messages
    3.10 +are sent using a binary protocol, not using XML. D-Bus also supports a method
    3.11 +call mapping for its messages, but it is not required; this makes using the
    3.12 +system quite simple.
    3.13 +
    3.14 +It comes with several bindings, including GLib, Python, Qt and Java.

     4.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     4.2 +++ b/desktop-file-utils/description.txt	Thu Apr 23 16:47:39 2015 +0300
     4.3 @@ -0,0 +1,6 @@
     4.4 +Some utilities to make dealing with .desktop files easier:
     4.5 +  * update-desktop-database -- update the desktop-MIME mapping
     4.6 +  * desktop-file-validate -- validate a desktop file
     4.7 +  * desktop-file-install -- install a desktop file, munging en route.
     4.8 +
     4.9 +This package contains update-desktop-database only.

     5.1 --- a/desktop-file-utils/receipt	Thu Apr 23 15:42:00 2015 +0200
     5.2 +++ b/desktop-file-utils/receipt	Thu Apr 23 16:47:39 2015 +0300
     5.3 @@ -3,7 +3,7 @@
     5.4  PACKAGE="desktop-file-utils"
     5.5  VERSION="0.21"
     5.6  CATEGORY="x-window"
     5.7 -SHORT_DESC="Desktop file utils from Freedesktop (update-desktop-database)."
     5.8 +SHORT_DESC="Utilities for .desktop files (update-desktop-database)"
     5.9  MAINTAINER="pankso@slitaz.org"
    5.10  LICENSE="GPL2"
    5.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
    5.12 @@ -16,7 +16,6 @@
    5.13  # Rules to configure and make the package.
    5.14  compile_rules()
    5.15  {
    5.16 -	cd $src
    5.17  	./configure \
    5.18  		--prefix=/usr \
    5.19  		$CONFIGURE_ARGS &&

     6.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     6.2 +++ b/dropbear/description.txt	Thu Apr 23 16:47:39 2015 +0300
     6.3 @@ -0,0 +1,8 @@
     6.4 +dropbear is a SSH 2 server and client designed to be small enough to be used in
     6.5 +small memory environments, while still being functional and secure enough for
     6.6 +general use.
     6.7 +
     6.8 +It implements most required features of the SSH 2 protocol, and other
     6.9 +features such as X11 and authentication agent forwarding.
    6.10 +
    6.11 +See http://matt.ucc.asn.au/dropbear/dropbear.html

     7.1 --- a/dropbear/receipt	Thu Apr 23 15:42:00 2015 +0200
     7.2 +++ b/dropbear/receipt	Thu Apr 23 16:47:39 2015 +0300
     7.3 @@ -3,7 +3,7 @@
     7.4  PACKAGE="dropbear"
     7.5  VERSION="2015.67"
     7.6  CATEGORY="security"
     7.7 -SHORT_DESC="Light SSH client and server."
     7.8 +SHORT_DESC="Lightweight SSH2 server and client"
     7.9  MAINTAINER="pascal.bellard@slitaz.org"
    7.10  LICENSE="MIT"
    7.11  TARBALL="$PACKAGE-$VERSION.tar.bz2"

     8.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     8.2 +++ b/expat/description.txt	Thu Apr 23 16:47:39 2015 +0300
     8.3 @@ -0,0 +1,3 @@
     8.4 +This package contains the runtime, shared library of expat, the C library for
     8.5 +parsing XML. Expat is a stream-oriented parser in which an application registers
     8.6 +handlers for things the parser might find in the XML document (like start tags).

     9.1 --- a/expat/receipt	Thu Apr 23 15:42:00 2015 +0200
     9.2 +++ b/expat/receipt	Thu Apr 23 16:47:39 2015 +0300
     9.3 @@ -3,7 +3,7 @@
     9.4  PACKAGE="expat"
     9.5  VERSION="2.1.0"
     9.6  CATEGORY="x-window"
     9.7 -SHORT_DESC="XML parsing library."
     9.8 +SHORT_DESC="XML parsing C library"
     9.9  MAINTAINER="pankso@slitaz.org"
    9.10  LICENSE="MIT"
    9.11  TARBALL="$PACKAGE-$VERSION.tar.gz"
    9.12 @@ -14,7 +14,6 @@
    9.13  # Rules to configure and make the package.
    9.14  compile_rules()
    9.15  {
    9.16 -	cd $src
    9.17  	./configure $CONFIGURE_ARGS &&
    9.18  	make && make DESTDIR=$DESTDIR install
    9.19  }
    9.20 @@ -23,9 +22,9 @@
    9.21  genpkg_rules()
    9.22  {
    9.23  	mkdir -p $fs/usr/lib $fs/usr/bin
    9.24 -    cp -a $install/usr/bin/* $fs/usr/bin
    9.25 -    cp -a $install/usr/lib/*.so* $fs/usr/lib
    9.26 -    # expat so.0 symbolic link.
    9.27 -    cd $fs/usr/lib
    9.28 -    ln -s libexpat.so.1.*.* libexpat.so.0
    9.29 +	cp -a $install/usr/bin/* $fs/usr/bin
    9.30 +	cp -a $install/usr/lib/*.so* $fs/usr/lib
    9.31 +	# expat so.0 symbolic link.
    9.32 +	cd $fs/usr/lib
    9.33 +	ln -s libexpat.so.1.*.* libexpat.so.0
    9.34  }

    10.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    10.2 +++ b/gpicview/description.txt	Thu Apr 23 16:47:39 2015 +0300
    10.3 @@ -0,0 +1,6 @@
    10.4 +GPicView is a lightweight GTK+ 2.x based image viewer with following features:
    10.5 +  * Extremely lightweight and fast with low memory usage
    10.6 +  * Very suitable for default image viewer of desktop system
    10.7 +  * Simple and intuitive interface
    10.8 +  * Minimal lib dependency: Only pure GTK+ is used
    10.9 +  * Desktop independent: Doesn't require any specific desktop environment

    11.1 --- a/gpicview/receipt	Thu Apr 23 15:42:00 2015 +0200
    11.2 +++ b/gpicview/receipt	Thu Apr 23 16:47:39 2015 +0300
    11.3 @@ -3,12 +3,13 @@
    11.4  PACKAGE="gpicview"
    11.5  VERSION="0.2.4"
    11.6  CATEGORY="graphics"
    11.7 -SHORT_DESC="Light pictures viewer."
    11.8 +SHORT_DESC="Lightweight image viewer"
    11.9  MAINTAINER="pankso@slitaz.org"
   11.10  LICENSE="GPL2"
   11.11  TARBALL="$PACKAGE-$VERSION.tar.gz"
   11.12  WEB_SITE="http://lxde.sourceforge.net/gpicview/"
   11.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   11.14 +TAGS="LXDE"
   11.15  HOST_ARCH="i486 arm"
   11.16  
   11.17  DEPENDS="gtk+ expat glib libgio libpng jpeg zlib"
   11.18 @@ -29,4 +30,3 @@
   11.19  	cp -a $install/usr/bin $fs/usr
   11.20  	cp -a $install/usr/share/$PACKAGE $fs/usr/share
   11.21  }
   11.22 -

    12.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    12.2 +++ b/libfm-dev/description.txt	Thu Apr 23 16:47:39 2015 +0300
    12.3 @@ -0,0 +1,4 @@
    12.4 +LibFM provides file management functions built on top of Glib/GIO giving
    12.5 +a convenient higher-level API.
    12.6 +
    12.7 +This package contains the development files for builds using GTK+ library.

    13.1 --- a/libfm-dev/receipt	Thu Apr 23 15:42:00 2015 +0200
    13.2 +++ b/libfm-dev/receipt	Thu Apr 23 16:47:39 2015 +0300
    13.3 @@ -3,7 +3,7 @@
    13.4  PACKAGE="libfm-dev"
    13.5  VERSION="1.2.3"
    13.6  CATEGORY="development"
    13.7 -SHORT_DESC="File manager library from LXDE, development files."
    13.8 +SHORT_DESC="File management support (GTK+ GUI development files)"
    13.9  MAINTAINER="pankso@slitaz.org"
   13.10  LICENSE="GPL2"
   13.11  WEB_SITE="http://pcmanfm.sourceforge.net"

    14.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    14.2 +++ b/libfm-gtk/description.txt	Thu Apr 23 16:47:39 2015 +0300
    14.3 @@ -0,0 +1,4 @@
    14.4 +LibFM provides file management functions built on top of Glib/GIO giving
    14.5 +a convenient higher-level API.
    14.6 +
    14.7 +This package contains the GTK+ version 2.0 GUI.

    15.1 --- a/libfm-gtk/receipt	Thu Apr 23 15:42:00 2015 +0200
    15.2 +++ b/libfm-gtk/receipt	Thu Apr 23 16:47:39 2015 +0300
    15.3 @@ -3,7 +3,7 @@
    15.4  PACKAGE="libfm-gtk"
    15.5  VERSION="1.2.3"
    15.6  CATEGORY="system-tools"
    15.7 -SHORT_DESC="GTK+ part of Libfm"
    15.8 +SHORT_DESC="File management support (GTK+2 GUI library)"
    15.9  MAINTAINER="al.bobylev@gmail.com"
   15.10  LICENSE="GPL2"
   15.11  WEB_SITE="http://pcmanfm.sourceforge.net"

    16.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    16.2 +++ b/libfm/description.txt	Thu Apr 23 16:47:39 2015 +0300
    16.3 @@ -0,0 +1,15 @@
    16.4 +LibFM provides file management functions built on top of Glib/GIO, giving
    16.5 +a convenient higher-level API.
    16.6 +
    16.7 +Some features:
    16.8 +  * Desktop-independent, following FreeDesktop standards;
    16.9 +  * Fast, light on memory usage, and responsive - well suited to less powerful
   16.10 +    hardware such as netbooks and thin clients;
   16.11 +  * Uses GIO/GVFS (like Nautilus) for Trash support and access to remote file
   16.12 +    systems (FTP, SFTP, WebDAV, Windows shares, etc.);
   16.13 +  * Clipboard operations are compatible with GTK+/GNOME and Qt/KDE;
   16.14 +  * Supports both Drag-and-Drop, and the X Direct Save protocol;
   16.15 +  * Reusable design with the core functions separated out to simplify porting
   16.16 +    to other GUIs.
   16.17 +
   16.18 +This package contains the core library.

    17.1 --- a/libfm/receipt	Thu Apr 23 15:42:00 2015 +0200
    17.2 +++ b/libfm/receipt	Thu Apr 23 16:47:39 2015 +0300
    17.3 @@ -3,7 +3,7 @@
    17.4  PACKAGE="libfm"
    17.5  VERSION="1.2.3"
    17.6  CATEGORY="system-tools"
    17.7 -SHORT_DESC="File manager library from LXDE."
    17.8 +SHORT_DESC="File management support (core library)"
    17.9  MAINTAINER="pankso@slitaz.org"
   17.10  LICENSE="GPL2"
   17.11  TARBALL="$PACKAGE-$VERSION.tar.xz"

    18.1 --- a/lxappearance-dev/receipt	Thu Apr 23 15:42:00 2015 +0200
    18.2 +++ b/lxappearance-dev/receipt	Thu Apr 23 16:47:39 2015 +0300
    18.3 @@ -3,11 +3,12 @@
    18.4  PACKAGE="lxappearance-dev"
    18.5  VERSION="0.5.5"
    18.6  CATEGORY="development"
    18.7 -SHORT_DESC="Devel files for LXappearance."
    18.8 +SHORT_DESC="LXDE GTK+ theme switcher (development)"
    18.9  MAINTAINER="pankso@slitaz.org"
   18.10  LICENSE="GPL2"
   18.11  WANTED="lxappearance"
   18.12  WEB_SITE="http://lxde.org/"
   18.13 +TAGS="LXDE"
   18.14  HOST_ARCH="i486 arm"
   18.15  
   18.16  DEPENDS="gtk+-dev pkg-config"

    19.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    19.2 +++ b/lxappearance-obconf/description.txt	Thu Apr 23 16:47:39 2015 +0300
    19.3 @@ -0,0 +1,9 @@
    19.4 +LXAppearance ObConf plugin.
    19.5 +
    19.6 +ObConf is a program used to configure OpenBox window manager developed by Dana
    19.7 +Jansens, Tim Riley, and Javeed Shaikh. LXAppearance is a tool used to configure
    19.8 +look and feels of the desktop written by Hong Jen Yee for LXDE project. This
    19.9 +plugin is derived from ObConf as an attempt to integrate obconf with
   19.10 +LXAppearance to provide a better user experience. Most of the source code are
   19.11 +taken from ObConf written by its authors with some modifications added by
   19.12 +LXAppearance developers to make it a plugin.

    20.1 --- a/lxappearance-obconf/receipt	Thu Apr 23 15:42:00 2015 +0200
    20.2 +++ b/lxappearance-obconf/receipt	Thu Apr 23 16:47:39 2015 +0300
    20.3 @@ -3,12 +3,13 @@
    20.4  PACKAGE="lxappearance-obconf"
    20.5  VERSION="0.2.2"
    20.6  CATEGORY="x-window"
    20.7 -SHORT_DESC="Openbox configuration plugin for LXappearance."
    20.8 +SHORT_DESC="LXDE GTK+ theme switcher (plugin)"
    20.9  MAINTAINER="pankso@slitaz.org"
   20.10  LICENSE="GPL2"
   20.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
   20.12  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   20.13  WEB_SITE="http://lxde.org/"
   20.14 +TAGS="LXDE"
   20.15  HOST_ARCH="i486 arm"
   20.16  
   20.17  DEPENDS="openbox lxappearance"

    21.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    21.2 +++ b/lxappearance/description.txt	Thu Apr 23 16:47:39 2015 +0300
    21.3 @@ -0,0 +1,14 @@
    21.4 +LXAppearance is a GUI application for the Lightweight X11 Desktop Environment
    21.5 +(LXDE).
    21.6 +
    21.7 +It is a new feature-rich GTK+ theme switcher able to change GTK+ themes, icon
    21.8 +themes, and fonts used by applications. GNOME/KDE/Xfce user may use build-in
    21.9 +theme, this works for GTK+ based lightweight desktop Environment.
   21.10 +
   21.11 +Features:
   21.12 +  * Choose GTK+ theme
   21.13 +  * Choose icon theme
   21.14 +  * Install new icon theme
   21.15 +  * Choose their favorite font
   21.16 +  * Choose toolbar style
   21.17 +  * See changes immediately in preview area

    22.1 --- a/lxappearance/receipt	Thu Apr 23 15:42:00 2015 +0200
    22.2 +++ b/lxappearance/receipt	Thu Apr 23 16:47:39 2015 +0300
    22.3 @@ -3,12 +3,13 @@
    22.4  PACKAGE="lxappearance"
    22.5  VERSION="0.5.5"
    22.6  CATEGORY="x-window"
    22.7 -SHORT_DESC="Desktop setting configuration utility from LXDE."
    22.8 +SHORT_DESC="LXDE GTK+ theme switcher"
    22.9  MAINTAINER="pankso@slitaz.org"
   22.10  LICENSE="GPL2"
   22.11  WEB_SITE="http://lxde.sourceforge.net/"
   22.12  TARBALL="$PACKAGE-$VERSION.tar.xz"
   22.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   22.14 +TAGS="LXDE"
   22.15  HOST_ARCH="i486 arm"
   22.16  
   22.17  DEPENDS="gtk+"

    23.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    23.2 +++ b/lxde-icon-theme/description.txt	Thu Apr 23 16:47:39 2015 +0300
    23.3 @@ -0,0 +1,4 @@
    23.4 +LXDE-Icon-Theme is the standard icon theme for the Lightweight X11 Desktop
    23.5 +Environment (LXDE).
    23.6 +
    23.7 +It is also known as the nuoveXT2 icon theme from which it is derived from.

    24.1 --- a/lxde-icon-theme/receipt	Thu Apr 23 15:42:00 2015 +0200
    24.2 +++ b/lxde-icon-theme/receipt	Thu Apr 23 16:47:39 2015 +0300
    24.3 @@ -3,12 +3,13 @@
    24.4  PACKAGE="lxde-icon-theme"
    24.5  VERSION="0.5.1"
    24.6  CATEGORY="misc"
    24.7 -SHORT_DESC="LXDE icon theme"
    24.8 +SHORT_DESC="LXDE standard icon theme"
    24.9  MAINTAINER="al.bobylev@gmail.com"
   24.10  LICENSE="LGPL3"
   24.11  WEB_SITE="http://www.lxde.org/"
   24.12  TARBALL="$PACKAGE-$VERSION.tar.xz"
   24.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   24.14 +TAGS="LXDE"
   24.15  
   24.16  DEPENDS=""
   24.17  BUILD_DEPENDS="coreutils"

    25.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    25.2 +++ b/lxde/description.txt	Thu Apr 23 16:47:39 2015 +0300
    25.3 @@ -0,0 +1,6 @@
    25.4 +LXDE (the Lightweight X11 Desktop Environment) is a new project aimed to provide
    25.5 +a new desktop environment which is lightweight and fast.
    25.6 +
    25.7 +This package is a metapackage depends on the core components and recommended
    25.8 +components of the LXDE. It includes lxpanel, lxtask, lxappearance, lxsession,
    25.9 +pcmanfm, lxinput, lxsession-edit, lxrandr, gpicview and leafpad.

    26.1 --- a/lxde/receipt	Thu Apr 23 15:42:00 2015 +0200
    26.2 +++ b/lxde/receipt	Thu Apr 23 16:47:39 2015 +0300
    26.3 @@ -3,14 +3,14 @@
    26.4  PACKAGE="lxde"
    26.5  VERSION="0.3.2.1"
    26.6  CATEGORY="meta"
    26.7 -SHORT_DESC="LXDE desktop environement meta package with SliTaz integration."
    26.8 +SHORT_DESC="Meta-package for the Lightweight X11 Desktop Environement"
    26.9  MAINTAINER="pankso@slitaz.org"
   26.10  LICENSE="GPL2"
   26.11  WEB_SITE="http://lxde.org/"
   26.12 -TAGS="window-manager desktop"
   26.13 +TAGS="LXDE window-manager desktop"
   26.14  HOST_ARCH="i486 arm"
   26.15  
   26.16 -SUGGESTED="lxterminal lxdm"
   26.17 +SUGGESTED="lxterminal lxdm lxshortcut xarchiver"
   26.18  DEPENDS="xorg-libX11 gtk+ lxpanel lxtask lxappearance lxsession pcmanfm \
   26.19  lxsession-edit lxrandr lxinput openbox obconf gpicview leafpad slitaz-configs
   26.20  slitaz-tools-boxes"

    27.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    27.2 +++ b/lxdm/description.txt	Thu Apr 23 16:47:39 2015 +0300
    27.3 @@ -0,0 +1,4 @@
    27.4 +lxdm is a lightweight GUI login manager which can be used as a dropped-in
    27.5 +replacement for GDM or KDM.
    27.6 +
    27.7 +Besides LXDE, lxdm can also work with KDE and others.

    28.1 --- a/lxdm/receipt	Thu Apr 23 15:42:00 2015 +0200
    28.2 +++ b/lxdm/receipt	Thu Apr 23 16:47:39 2015 +0300
    28.3 @@ -3,12 +3,13 @@
    28.4  PACKAGE="lxdm"
    28.5  VERSION="0.4.1"
    28.6  CATEGORY="x-window"
    28.7 -SHORT_DESC="Login manager from LXDE."
    28.8 +SHORT_DESC="GUI login manager for LXDE"
    28.9  MAINTAINER="pankso@slitaz.org"
   28.10  LICENSE="GPL3"
   28.11  TARBALL="$PACKAGE-$VERSION.tar.gz"
   28.12  WEB_SITE="http://lxde.org/"
   28.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   28.14 +TAGS="LXDE"
   28.15  
   28.16  DEPENDS="xorg-libX11 gtk+ slitaz-configs"
   28.17  BUILD_DEPENDS="xorg-dev gtk+-dev"
   28.18 @@ -16,7 +17,6 @@
   28.19  # Rules to configure and make the package.
   28.20  compile_rules()
   28.21  {
   28.22 -	cd $src
   28.23  	./configure \
   28.24  		--libexecdir=/usr/lib/lxdm \
   28.25  		--sysconfdir=/etc \

    29.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    29.2 +++ b/lxinput/description.txt	Thu Apr 23 16:47:39 2015 +0300
    29.3 @@ -0,0 +1,7 @@
    29.4 +LXInput is a GUI application for the Lightweight X11 Desktop Environment (LXDE).
    29.5 +
    29.6 +It configures keyboard and mouse settings:
    29.7 +  * Delay and Interval for character repeat
    29.8 +  * Enable/Disable beeps of keyboard input error
    29.9 +  * Swap left and right mouse buttons
   29.10 +  * Mouse acceleration and sensitivity

    30.1 --- a/lxinput/receipt	Thu Apr 23 15:42:00 2015 +0200
    30.2 +++ b/lxinput/receipt	Thu Apr 23 16:47:39 2015 +0300
    30.3 @@ -3,12 +3,13 @@
    30.4  PACKAGE="lxinput"
    30.5  VERSION="0.3.4"
    30.6  CATEGORY="x-window"
    30.7 -SHORT_DESC="LXDE input manager (Keyboard and mouse settings)."
    30.8 +SHORT_DESC="LXDE keyboard and mouse configuration"
    30.9  MAINTAINER="pankso@slitaz.org"
   30.10  LICENSE="GPL3"
   30.11  WEB_SITE="http://lxde.org"
   30.12  TARBALL="$PACKAGE-$VERSION.tar.xz"
   30.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   30.14 +TAGS="LXDE keyboard mouse"
   30.15  HOST_ARCH="i486 arm"
   30.16  
   30.17  DEPENDS="gtk+"

    31.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    31.2 +++ b/lxlauncher/description.txt	Thu Apr 23 16:47:39 2015 +0300
    31.3 @@ -0,0 +1,8 @@
    31.4 +LXLauncher is a GUI application for the Lightweight X11 Desktop Environment
    31.5 +(LXDE).
    31.6 +
    31.7 +It is a Easy-Mode launcher for netbooks and subnotebooks like the EeePC.
    31.8 +
    31.9 +It's standard-compliant and desktop-independent. It follows freedesktop.org
   31.10 +specs, so newly added applications will automatically show up in the launcher,
   31.11 +and vice versa for the removed ones.

    32.1 --- a/lxlauncher/receipt	Thu Apr 23 15:42:00 2015 +0200
    32.2 +++ b/lxlauncher/receipt	Thu Apr 23 16:47:39 2015 +0300
    32.3 @@ -3,12 +3,13 @@
    32.4  PACKAGE="lxlauncher"
    32.5  VERSION="0.2.4"
    32.6  CATEGORY="x-window"
    32.7 -SHORT_DESC="LXDE desktop launcher."
    32.8 +SHORT_DESC="LXDE launcher for netbooks"
    32.9  LICENSE="GPL3"
   32.10  MAINTAINER="pankso@slitaz.org"
   32.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
   32.12  WEB_SITE="http://lxde.org/"
   32.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   32.14 +TAGS="LXDE netbook"
   32.15  
   32.16  DEPENDS="xorg-libX11 gtk+ gnome-menus startup-notification menu-cache xorg-libXdamage"
   32.17  BUILD_DEPENDS="xorg-libX11-dev gtk+-dev gnome-menus gnome-menus-dev \

    33.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    33.2 +++ b/lxmenu-data/description.txt	Thu Apr 23 16:47:39 2015 +0300
    33.3 @@ -0,0 +1,4 @@
    33.4 +LXMenu-data is a component for the Lightweight X11 Desktop Environment (LXDE).
    33.5 +
    33.6 +It contains files required to build desktop menus for LXDE compling to the
    33.7 +freedesktop.org menu specificiation.

    34.1 --- a/lxmenu-data/receipt	Thu Apr 23 15:42:00 2015 +0200
    34.2 +++ b/lxmenu-data/receipt	Thu Apr 23 16:47:39 2015 +0300
    34.3 @@ -3,13 +3,14 @@
    34.4  PACKAGE="lxmenu-data"
    34.5  VERSION="0.1.4"
    34.6  CATEGORY="x-window"
    34.7 -SHORT_DESC="Freedesktop.org menu-spec-compliant desktop menus for LXDE."
    34.8 +SHORT_DESC="LXDE freedesktop.org menu specification"
    34.9  MAINTAINER="rcx@zoominternet.net"
   34.10  LICENSE="GPL2"
   34.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
   34.12  WEB_SITE="http://www.lxde.org/"
   34.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   34.14  CONFIG_FILES="/etc/xdg/menus/lxde-applications.menu"
   34.15 +TAGS="LXDE"
   34.16  HOST_ARCH="i486 arm"
   34.17  
   34.18  [ "$ARCH" == "i486" ] && BUILD_DEPENDS="gettext intltool"

    35.1 --- a/lxpanel-dev/receipt	Thu Apr 23 15:42:00 2015 +0200
    35.2 +++ b/lxpanel-dev/receipt	Thu Apr 23 16:47:39 2015 +0300
    35.3 @@ -3,10 +3,11 @@
    35.4  PACKAGE="lxpanel-dev"
    35.5  VERSION="0.6.2"
    35.6  CATEGORY="x-window"
    35.7 -SHORT_DESC="Development files for LXpanel"
    35.8 +SHORT_DESC="LXDE panel (development)"
    35.9  MAINTAINER="pankso@slitaz.org"
   35.10  LICENSE="GPL2"
   35.11  WEB_SITE="http://www.lxde.org/"
   35.12 +TAGS="LXDE"
   35.13  HOST_ARCH="i486 arm"
   35.14  
   35.15  WANTED="lxpanel"

    36.1 --- a/lxpanel-extra/receipt	Thu Apr 23 15:42:00 2015 +0200
    36.2 +++ b/lxpanel-extra/receipt	Thu Apr 23 16:47:39 2015 +0300
    36.3 @@ -3,10 +3,11 @@
    36.4  PACKAGE="lxpanel-extra"
    36.5  VERSION="0.6.2"
    36.6  CATEGORY="x-window"
    36.7 -SHORT_DESC="Extra files and plugins for LXpanel"
    36.8 +SHORT_DESC="LXDE panel (extra files and plugins)"
    36.9  MAINTAINER="pankso@slitaz.org"
   36.10  LICENSE="GPL2"
   36.11  WEB_SITE="http://www.lxde.org/"
   36.12 +TAGS="LXDE"
   36.13  
   36.14  WANTED="lxpanel"
   36.15  DEPENDS="lxpanel libwnck"

    37.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    37.2 +++ b/lxpanel/description.txt	Thu Apr 23 16:47:39 2015 +0300
    37.3 @@ -0,0 +1,19 @@
    37.4 +LXPanel is a GUI application for the Lightweight X11 Desktop Environment (LXDE).
    37.5 +
    37.6 +It is derived from fbpanel and includes the following features:
    37.7 +  * User-friendly application menu automatically generated from .desktop files
    37.8 +    on the system
    37.9 +  * Launcher bar (small icons clicked to launch apps)
   37.10 +  * Task bar supporting ICCCM/EWMH `urgency' hint (Pidgin IM windows can flash
   37.11 +    on new incoming messages)
   37.12 +  * Run dialog (type a command to run, without opening a terminal)
   37.13 +  * Net status icon plug-in (optional).
   37.14 +  * Volume control plug-in (optional).
   37.15 +  * Notification area (system tray).
   37.16 +  * Digital clock.
   37.17 +  * Keyboard LEDs plug-in (display caps/num locks).
   37.18 +  * lxpanelctl: control lxpanel from other programs.
   37.19 +
   37.20 +For example, "lxpanelctl run" will show the Run dialog in lxpanel, and
   37.21 +"lxpanelctl menu" will show the application menu. This is useful in combination
   37.22 +with window manager key bindings.

    38.1 --- a/lxpanel/receipt	Thu Apr 23 15:42:00 2015 +0200
    38.2 +++ b/lxpanel/receipt	Thu Apr 23 16:47:39 2015 +0300
    38.3 @@ -3,14 +3,14 @@
    38.4  PACKAGE="lxpanel"
    38.5  VERSION="0.6.2"
    38.6  CATEGORY="x-window"
    38.7 -SHORT_DESC="Lightweight X11 desktop panel"
    38.8 +SHORT_DESC="LXDE panel"
    38.9  MAINTAINER="pankso@slitaz.org"
   38.10  LICENSE="GPL2"
   38.11  WEB_SITE="http://www.lxde.org/"
   38.12  TARBALL="$PACKAGE-$VERSION.tar.gz"
   38.13 -WGET_URL="$SF_MIRROR/lxde/LXPanel%20%28desktop%20panel%29/LXPanel%20$VERSION/$TARBALL"
   38.14 +WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   38.15  CONFIG_FILES="/etc/lxpanel/default"
   38.16 -TAGS="gtk2 panel"
   38.17 +TAGS="LXDE gtk2 panel"
   38.18  HOST_ARCH="i486 arm"
   38.19  
   38.20  SUGGESTED="lxde lxsession slitaz-icon"

    39.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    39.2 +++ b/lxpolkit/description.txt	Thu Apr 23 16:47:39 2015 +0300
    39.3 @@ -0,0 +1,4 @@
    39.4 +LXPolkit is a GUI application for the Lightweight X11 Desktop Environment
    39.5 +(LXDE).
    39.6 +
    39.7 +It's a simple PolicyKit authentication agent.

    40.1 --- a/lxpolkit/receipt	Thu Apr 23 15:42:00 2015 +0200
    40.2 +++ b/lxpolkit/receipt	Thu Apr 23 16:47:39 2015 +0300
    40.3 @@ -3,12 +3,13 @@
    40.4  PACKAGE="lxpolkit"
    40.5  VERSION="0.1.0"
    40.6  CATEGORY="x-window"
    40.7 -SHORT_DESC="LXDE PolKit manager."
    40.8 +SHORT_DESC="LXDE PolicyKit authentication agent"
    40.9  MAINTAINER="pankso@slitaz.org"
   40.10  LICENSE="GPL3"
   40.11  TARBALL="$PACKAGE-$VERSION.tar.gz"
   40.12  WGET_URL="$SF_MIRROR/lxde/LXPolkit/$TARBALL"
   40.13  WEB_SITE="http://lxde.org"
   40.14 +TAGS="LXDE"
   40.15  
   40.16  DEPENDS="gtk+ polkit"
   40.17  BUILD_DEPENDS="gtk+-dev polkit-dev"
   40.18 @@ -16,7 +17,6 @@
   40.19  # Rules to configure and make the package.
   40.20  compile_rules()
   40.21  {
   40.22 -	cd $src
   40.23  	./configure \
   40.24  		--sysconfdir=/etc \
   40.25  		--libexecdir=/usr/lib/lxde \

    41.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    41.2 +++ b/lxrandr/description.txt	Thu Apr 23 16:47:39 2015 +0300
    41.3 @@ -0,0 +1,15 @@
    41.4 +LXRandR is a GUI application for the Lightweight X11 Desktop Environment (LXDE).
    41.5 +
    41.6 +This is a very basic monitor config tool utilizing the X extension called RandR.
    41.7 +It can let you change the screen resolution on the fly. Besides, when you run
    41.8 +lxrandr with external monitor connected, its GUI will change, and show you some
    41.9 +quick options to get your projector or external monitor working correctly.
   41.10 +
   41.11 +This tool doesn't aim to be a full randr frontend. It's a utility for grandma,
   41.12 +not for geeks. If you need the full power of RandR, get xrandr (console) or
   41.13 +grandr (GUI) and read some tutorials.
   41.14 +
   41.15 +LXRandR only gives you some easy and quick options which are intuitive. It's
   41.16 +very suitable for laptop users who frequently uses projectors or external
   41.17 +monitor and just want to get their work done without reading a lot of
   41.18 +"geek-centered" manuals or command line tutorials.

    42.1 --- a/lxrandr/receipt	Thu Apr 23 15:42:00 2015 +0200
    42.2 +++ b/lxrandr/receipt	Thu Apr 23 16:47:39 2015 +0300
    42.3 @@ -3,12 +3,13 @@
    42.4  PACKAGE="lxrandr"
    42.5  VERSION="0.3.0"
    42.6  CATEGORY="utilities"
    42.7 -SHORT_DESC="LXDE screen manager."
    42.8 +SHORT_DESC="LXDE monitor configuration tool"
    42.9  MAINTAINER="gokhlayeh@slitaz.org"
   42.10  LICENSE="GPL2"
   42.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
   42.12  WEB_SITE="http://lxde.org"
   42.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   42.14 +TAGS="LXDE"
   42.15  HOST_ARCH="i486 arm"
   42.16  
   42.17  DEPENDS="gtk+ xorg-xrandr"
   42.18 @@ -36,4 +37,3 @@
   42.19  	rm -rf $fs/usr/share/man
   42.20  	rm -rf $fs/usr/share/locale	
   42.21  }
   42.22 -

    43.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    43.2 +++ b/lxsession-edit/description.txt	Thu Apr 23 16:47:39 2015 +0300
    43.3 @@ -0,0 +1,2 @@
    43.4 +LXSession-Edit is a simple session editor GUI for lxsession-lite which follows
    43.5 +autostart specs from FreeDesktop.Org.

    44.1 --- a/lxsession-edit/receipt	Thu Apr 23 15:42:00 2015 +0200
    44.2 +++ b/lxsession-edit/receipt	Thu Apr 23 16:47:39 2015 +0300
    44.3 @@ -3,12 +3,13 @@
    44.4  PACKAGE="lxsession-edit"
    44.5  VERSION="0.2.0"
    44.6  CATEGORY="x-window"
    44.7 -SHORT_DESC="LXDE X session manager editor."
    44.8 +SHORT_DESC="Configure what application start up automatically in LXDE"
    44.9  MAINTAINER="pankso@slitaz.org"
   44.10  LICENSE="GPL2"
   44.11  WEB_SITE="http://wiki.lxde.org/en/LXSession_Edit"
   44.12  TARBALL="$PACKAGE-$VERSION.tar.gz"
   44.13 -WGET_URL="$SF_MIRROR/lxde/LXSession%20Edit/lxsession-edit%20$VERSION/$TARBALL"
   44.14 +WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   44.15 +TAGS="LXDE"
   44.16  HOST_ARCH="i486 arm"
   44.17  
   44.18  DEPENDS="gtk+ lxsession"

    45.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    45.2 +++ b/lxsession/description.txt	Thu Apr 23 16:47:39 2015 +0300
    45.3 @@ -0,0 +1,18 @@
    45.4 +LXSession is a lightweight X11 session manager with fewer dependencies, designed
    45.5 +for use with the LXDE (Lightweight X11 Desktop Environment). It derived from XSM
    45.6 +and have following differences:
    45.7 +  * Removed the session dialog from xsm.
    45.8 +  * Stripped down without session restore function.
    45.9 +  * Automaticlly restart specific program if crashes happened.
   45.10 +  * Use better configuration.
   45.11 +  * Provide a nice logout-dialog with the ability to shutdown / reboot /
   45.12 +    suspend / hibernate via HAL or gdm
   45.13 +  * Support halt/reboot LTSP thin clients, and more...
   45.14 +
   45.15 +It's desktop-independent and can be used with any window manager.
   45.16 +
   45.17 +As "session manager" lxsession used to automatically start a set of applications
   45.18 +and set up a working desktop environment
   45.19 +
   45.20 +LXSession has also a built-in lightweight Xsettings daemon, which can configure
   45.21 +GTK+ themes, keyboard, and mouse for you on session startup.

    46.1 --- a/lxsession/receipt	Thu Apr 23 15:42:00 2015 +0200
    46.2 +++ b/lxsession/receipt	Thu Apr 23 16:47:39 2015 +0300
    46.3 @@ -3,12 +3,13 @@
    46.4  PACKAGE="lxsession"
    46.5  VERSION="0.5.2"
    46.6  CATEGORY="x-window"
    46.7 -SHORT_DESC="LXDE X session manager."
    46.8 +SHORT_DESC="Default session manager for LXDE"
    46.9  MAINTAINER="pankso@slitaz.org"
   46.10  LICENSE="GPL2"
   46.11  WEB_SITE="http://wiki.lxde.org/en/LXSession"
   46.12  TARBALL="$PACKAGE-$VERSION.tar.xz"
   46.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   46.14 +TAGS="LXDE"
   46.15  HOST_ARCH="i486 arm"
   46.16  
   46.17  DEPENDS="gtk+ dbus"

    47.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    47.2 +++ b/lxshortcut/description.txt	Thu Apr 23 16:47:39 2015 +0300
    47.3 @@ -0,0 +1,5 @@
    47.4 +LXShortcut is a GUI application for the Lightweight X11 Desktop Environment
    47.5 +(LXDE).
    47.6 +
    47.7 +It allows creating and editing application shortcuts compatible with the
    47.8 +freedesktop.org Desktop Entry specification.

    48.1 --- a/lxshortcut/receipt	Thu Apr 23 15:42:00 2015 +0200
    48.2 +++ b/lxshortcut/receipt	Thu Apr 23 16:47:39 2015 +0300
    48.3 @@ -3,12 +3,13 @@
    48.4  PACKAGE="lxshortcut"
    48.5  VERSION="0.1.2"
    48.6  CATEGORY="x-window"
    48.7 -SHORT_DESC="Edit application shortcuts compliant with the freedesktop.org Desktop Entry spec."
    48.8 +SHORT_DESC="LXDE application shortcut editor"
    48.9  MAINTAINER="rcx@zoominternet.net"
   48.10  LICENSE="GPL3"
   48.11  TARBALL="$PACKAGE-$VERSION.tar.gz"
   48.12  WEB_SITE="http://www.lxde.org/"
   48.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   48.14 +TAGS="LXDE"
   48.15  
   48.16  DEPENDS="glib glibc-base libgio expat zlib \
   48.17  gtk+ atk cairo pango pixman libpng fontconfig freetype \

    49.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    49.2 +++ b/lxtask/description.txt	Thu Apr 23 16:47:39 2015 +0300
    49.3 @@ -0,0 +1,3 @@
    49.4 +LXTask is a GUI application for the Lightweight X11 Desktop Environment (LXDE).
    49.5 +
    49.6 +It allows monitoring and controlling of running processes.

    50.1 --- a/lxtask/receipt	Thu Apr 23 15:42:00 2015 +0200
    50.2 +++ b/lxtask/receipt	Thu Apr 23 16:47:39 2015 +0300
    50.3 @@ -3,12 +3,13 @@
    50.4  PACKAGE="lxtask"
    50.5  VERSION="0.1.6"
    50.6  CATEGORY="system-tools"
    50.7 -SHORT_DESC="System task manager with a nice GTK interface."
    50.8 +SHORT_DESC="LXDE task manager"
    50.9  MAINTAINER="pankso@slitaz.org"
   50.10  LICENSE="GPL2"
   50.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
   50.12  WEB_SITE="http://lxde.sourceforge.net/"
   50.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   50.14 +TAGS="LXDE"
   50.15  HOST_ARCH="i486 arm"
   50.16  
   50.17  DEPENDS="gtk+ xorg-libXdamage"

    51.1 --- a/lxterminal-locales/receipt	Thu Apr 23 15:42:00 2015 +0200
    51.2 +++ b/lxterminal-locales/receipt	Thu Apr 23 16:47:39 2015 +0300
    51.3 @@ -3,16 +3,15 @@
    51.4  PACKAGE="lxterminal-locales"
    51.5  VERSION="0.2.0"
    51.6  CATEGORY="utilities"
    51.7 -SHORT_DESC="LXDE X Terminal emulator locales."
    51.8 +SHORT_DESC="LXDE terminal emulator locale files"
    51.9  MAINTAINER="gokhlayeh@slitaz.org"
   51.10  LICENSE="GPL2"
   51.11  WANTED="lxterminal"
   51.12  WEB_SITE="http://lxde.org"
   51.13 +TAGS="LXDE locale"
   51.14  
   51.15  DEPENDS="lxterminal"
   51.16  
   51.17 -# Rules to configure and make the package.
   51.18 -
   51.19  # Rules to gen a SliTaz package suitable for Tazpkg.
   51.20  genpkg_rules()
   51.21  {

    52.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    52.2 +++ b/lxterminal/description.txt	Thu Apr 23 16:47:39 2015 +0300
    52.3 @@ -0,0 +1,6 @@
    52.4 +LXTerminal is a VTE-based terminal emulator for the Lightweight X11 Desktop
    52.5 +Environment (LXDE).
    52.6 +
    52.7 +It supports multiple tabs and has only minimal dependencies thus being
    52.8 +completely desktop-independent. In order to reduce memory usage and increase
    52.9 +the performance, all instances of the terminal are sharing a single process.

    53.1 --- a/lxterminal/receipt	Thu Apr 23 15:42:00 2015 +0200
    53.2 +++ b/lxterminal/receipt	Thu Apr 23 16:47:39 2015 +0300
    53.3 @@ -3,14 +3,14 @@
    53.4  PACKAGE="lxterminal"
    53.5  VERSION="0.2.0"
    53.6  CATEGORY="utilities"
    53.7 -SHORT_DESC="LXDE X Terminal emulator."
    53.8 +SHORT_DESC="LXDE terminal emulator"
    53.9  MAINTAINER="gokhlayeh@slitaz.org"
   53.10  LICENSE="GPL2"
   53.11  SUGGESTED="lxterminal-locales"
   53.12  TARBALL="$PACKAGE-$VERSION.tar.gz"
   53.13  WEB_SITE="http://lxde.org"
   53.14  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   53.15 -TAGS="terminal"
   53.16 +TAGS="LXDE terminal"
   53.17  
   53.18  DEPENDS="vte gtk+"
   53.19  BUILD_DEPENDS="intltool vte-dev vte-terminal gtk+-dev"

    54.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    54.2 +++ b/lzma/description.txt	Thu Apr 23 16:47:39 2015 +0300
    54.3 @@ -0,0 +1,9 @@
    54.4 +The Lempel-Ziv Markov-chain Algorithm is a compression method based on the
    54.5 +famous LZ77 algorithm, and was first introduced by 7-Zip for use in 7z archives.
    54.6 +
    54.7 +Its main characteristics are a very high compression ratio, with high RAM usage,
    54.8 +and fast decompression, with low RAM usage. These properties make it well suited
    54.9 +to embedded uses, such as for ROM (firmware) compression.
   54.10 +
   54.11 +This package provides the lzma command line utility, which has a familiar
   54.12 +gzip-like interface.

    55.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    55.2 +++ b/menu-cache-dev/description.txt	Thu Apr 23 16:47:39 2015 +0300
    55.3 @@ -0,0 +1,4 @@
    55.4 +Libmenu-cache is a library creating and utilizing caches to speed up the access
    55.5 +to freedesktop.org defined application menus.
    55.6 +
    55.7 +This package contains the development files.

    56.1 --- a/menu-cache-dev/receipt	Thu Apr 23 15:42:00 2015 +0200
    56.2 +++ b/menu-cache-dev/receipt	Thu Apr 23 16:47:39 2015 +0300
    56.3 @@ -3,12 +3,13 @@
    56.4  PACKAGE="menu-cache-dev"
    56.5  VERSION="1.0.0"
    56.6  CATEGORY="development"
    56.7 -SHORT_DESC="Library used to read freedesktop.org menus (development)"
    56.8 +SHORT_DESC="LXDE implementation of the freedesktop Menu's cache (development)"
    56.9  MAINTAINER="pankso@slitaz.org"
   56.10  LICENSE="GPL2"
   56.11  WEB_SITE="http://lxde.sourceforge.net/"
   56.12  WANTED="menu-cache"
   56.13  DEPENDS="menu-cache pkg-config"
   56.14 +TAGS="LXDE"
   56.15  HOST_ARCH="i486 arm"
   56.16  
   56.17  # Rules to gen a SliTaz package suitable for Tazpkg.

    57.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    57.2 +++ b/menu-cache/description.txt	Thu Apr 23 16:47:39 2015 +0300
    57.3 @@ -0,0 +1,10 @@
    57.4 +Libmenu-cache is a library creating and utilizing caches to speed up the access
    57.5 +to freedesktop.org defined application menus.
    57.6 +
    57.7 +It can be used as a replacement of libgnome-menu of gnome-menus:
    57.8 +  * Shorten time for loading menu entries.
    57.9 +  * Ease of use (API is very similar to that of libgnome-menu).
   57.10 +  * Lightweight runtime library (parsing of the menu definition files are done
   57.11 +    by menu-cache-gen when the menus are really changed).
   57.12 +  * Less unnecessary and complicated file monitoring.
   57.13 +  * Heavily reduced disk I/O.

    58.1 --- a/menu-cache/receipt	Thu Apr 23 15:42:00 2015 +0200
    58.2 +++ b/menu-cache/receipt	Thu Apr 23 16:47:39 2015 +0300
    58.3 @@ -3,12 +3,13 @@
    58.4  PACKAGE="menu-cache"
    58.5  VERSION="1.0.0"
    58.6  CATEGORY="x-window"
    58.7 -SHORT_DESC="Library used to read freedesktop.org menus"
    58.8 +SHORT_DESC="LXDE implementation of the freedesktop Menu's cache"
    58.9  MAINTAINER="pankso@slitaz.org"
   58.10  LICENSE="GPL2"
   58.11  WEB_SITE="https://github.com/lxde/menu-cache"
   58.12  TARBALL="$PACKAGE-$VERSION.tar.xz"
   58.13  WGET_URL="$SF_MIRROR/lxde/$TARBALL"
   58.14 +TAGS="LXDE"
   58.15  HOST_ARCH="i486 arm"
   58.16  
   58.17  DEPENDS="glib glibc-base libffi libfm libgio pcre zlib" # slitaz-menus ?

    59.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    59.2 +++ b/ntfs-3g/description.txt	Thu Apr 23 16:47:39 2015 +0300
    59.3 @@ -0,0 +1,2 @@
    59.4 +NTFS-3G uses FUSE (Filesystem in Userspace) to provide support for the NTFS
    59.5 +filesystem used by Microsoft Windows.

    60.1 --- a/ntfs-3g/receipt	Thu Apr 23 15:42:00 2015 +0200
    60.2 +++ b/ntfs-3g/receipt	Thu Apr 23 16:47:39 2015 +0300
    60.3 @@ -3,7 +3,7 @@
    60.4  PACKAGE="ntfs-3g"
    60.5  VERSION="2014.2.15"
    60.6  CATEGORY="system-tools"
    60.7 -SHORT_DESC="The free ntfs driver."
    60.8 +SHORT_DESC="Read/write NTFS driver for FUSE"
    60.9  MAINTAINER="pankso@slitaz.org"
   60.10  LICENSE="GPL2"
   60.11  SOURCE="ntfs-3g_ntfsprogs"
   60.12 @@ -19,7 +19,6 @@
   60.13  # Rules to configure and make the package.
   60.14  compile_rules()
   60.15  {
   60.16 -	cd $src
   60.17  	./configure --prefix=/usr \
   60.18  	--disable-static \
   60.19  	--with-fuse=internal \
   60.20 @@ -41,7 +40,6 @@
   60.21  	#this link allow udisks2 to use ntfs-3g
   60.22  	cd $fs/sbin
   60.23  	ln -s mount.ntfs-3g mount.ntfs
   60.24 -	
   60.25  }
   60.26  
   60.27  # Pre remove and post install commands for Tazpkg.

    61.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    61.2 +++ b/openbox/description.txt	Thu Apr 23 16:47:39 2015 +0300
    61.3 @@ -0,0 +1,22 @@
    61.4 +Openbox works with your applications, and makes your desktop easier to manage.
    61.5 +This is because the approach to its development was the opposite of what seems
    61.6 +to be the general case for window managers. Openbox was written first to comply
    61.7 +with standards and to work properly. Only when that was in place did the team
    61.8 +turn to the visual interface.
    61.9 +
   61.10 +Openbox is fully functional as a stand-alone working environment, or can be used
   61.11 +as a drop-in replacement for the default window manager in the GNOME or KDE
   61.12 +desktop environments.
   61.13 +
   61.14 +Openbox 3 is a completely new breed of window manager. It is not based upon any
   61.15 +existing code base, although the visual appearance has been based upon that of
   61.16 +Blackbox. Openbox 2 was based on the Blackbox 0.65.0 codebase.
   61.17 +
   61.18 +Some of the things to look for in Openbox are:
   61.19 +  * ICCCM and EWMH compliance!
   61.20 +  * Very fast
   61.21 +  * Chainable key bindings
   61.22 +  * Customizable mouse actions
   61.23 +  * Window resistance
   61.24 +  * Multi-head Xinerama support!
   61.25 +  * Pipe menus

    62.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    62.2 +++ b/pango/description.txt	Thu Apr 23 16:47:39 2015 +0300
    62.3 @@ -0,0 +1,11 @@
    62.4 +Pango is a library for layout and rendering of text, with an emphasis on
    62.5 +internationalization. Pango can be used anywhere that text layout is needed.
    62.6 +However, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as
    62.7 +a test platform. Pango forms the core of text and font handling for GTK+-2.0.
    62.8 +
    62.9 +Pango is designed to be modular; the core Pango layout can be used with four
   62.10 +different font backends:
   62.11 +  * Core X windowing system fonts
   62.12 +  * Client-side fonts on X using the Xft library
   62.13 +  * Direct rendering of scalable fonts using the FreeType library
   62.14 +  * Native fonts on Microsoft backends

    63.1 --- a/pango/receipt	Thu Apr 23 15:42:00 2015 +0200
    63.2 +++ b/pango/receipt	Thu Apr 23 16:47:39 2015 +0300
    63.3 @@ -3,7 +3,7 @@
    63.4  PACKAGE="pango"
    63.5  VERSION="1.36.8"
    63.6  CATEGORY="x-window"
    63.7 -SHORT_DESC="Library for layout and rendering of text."
    63.8 +SHORT_DESC="Layout and rendering of internationalized text"
    63.9  MAINTAINER="pankso@slitaz.org"
   63.10  LICENSE="GPL2"
   63.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
   63.12 @@ -41,19 +41,18 @@
   63.13  genpkg_rules()
   63.14  {
   63.15  	mkdir -p $fs/usr/bin $fs/usr/lib $fs/etc/pango
   63.16 -    cp -a $install/usr/bin/* $fs/usr/bin
   63.17 -    cp -a $install/usr/lib/*.so* $fs/usr/lib
   63.18 -    cp -a $install/usr/lib/pango $fs/usr/lib
   63.19 -    rm -rf $fs/usr/lib/pango/1.8.0/modules/*.la
   63.20 -    [ -d "$install/etc" ] && cp -a $install/etc $fs
   63.21 -    touch $fs/etc/pango/pango.modules
   63.22 +	cp -a $install/usr/bin/* $fs/usr/bin
   63.23 +	cp -a $install/usr/lib/*.so* $fs/usr/lib
   63.24 +	cp -a $install/usr/lib/pango $fs/usr/lib
   63.25 +	rm -rf $fs/usr/lib/pango/1.8.0/modules/*.la
   63.26 +	[ -d "$install/etc" ] && cp -a $install/etc $fs
   63.27 +	touch $fs/etc/pango/pango.modules
   63.28  }
   63.29  
   63.30  # Pre and post install commands for Tazpkg.
   63.31  post_install()
   63.32  {
   63.33 -    echo "Processing post-install commands..."
   63.34 -    # Rebuilds pango.modules when installed.
   63.35 -    chroot $1/ /usr/bin/pango-querymodules > $1/etc/pango/pango.modules
   63.36 +	echo "Processing post-install commands..."
   63.37 +	# Rebuilds pango.modules when installed.
   63.38 +	chroot $1/ /usr/bin/pango-querymodules > $1/etc/pango/pango.modules
   63.39  }
   63.40 -

    64.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    64.2 +++ b/pciutils/description.txt	Thu Apr 23 16:47:39 2015 +0300
    64.3 @@ -0,0 +1,2 @@
    64.4 +This package contains various utilities for inspecting and setting of devices
    64.5 +connected to the PCI bus.

    65.1 --- a/pciutils/receipt	Thu Apr 23 15:42:00 2015 +0200
    65.2 +++ b/pciutils/receipt	Thu Apr 23 16:47:39 2015 +0300
    65.3 @@ -3,7 +3,7 @@
    65.4  PACKAGE="pciutils"
    65.5  VERSION="3.2.1"
    65.6  CATEGORY="system-tools"
    65.7 -SHORT_DESC="Utilities to list PCI device by name (lspci)."
    65.8 +SHORT_DESC="Linux PCI Utilities"
    65.9  MAINTAINER="pankso@slitaz.org"
   65.10  LICENSE="GPL2"
   65.11  TARBALL="$PACKAGE-$VERSION.tar.gz"
   65.12 @@ -16,7 +16,6 @@
   65.13  # Rules to configure and make the package.
   65.14  compile_rules()
   65.15  {
   65.16 -	cd $src
   65.17  	make OPT="${CFLAGS} -fPIC -DPIC" SHARED=no PREFIX=/usr SHAREDIR=/usr/share/misc MANDIR=/usr/share/man all
   65.18  	cp -a lib/libpci.a $WOK/$PACKAGE/source
   65.19  	make clean

    66.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    66.2 +++ b/pcmciautils/description.txt	Thu Apr 23 16:47:39 2015 +0300
    66.3 @@ -0,0 +1,4 @@
    66.4 +This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or later,
    66.5 +replacing the old pcmcia-cs tools used with earlier kernel versions. PCMCIA
    66.6 +cards are commonly used in laptops to provide expanded capabilities such as
    66.7 +network connections, modems, increased memory, etc.

    67.1 --- a/pcmciautils/receipt	Thu Apr 23 15:42:00 2015 +0200
    67.2 +++ b/pcmciautils/receipt	Thu Apr 23 16:47:39 2015 +0300
    67.3 @@ -3,7 +3,7 @@
    67.4  PACKAGE="pcmciautils"
    67.5  VERSION="018"
    67.6  CATEGORY="system-tools"
    67.7 -SHORT_DESC="Utils to use with PCMCIA cards"
    67.8 +SHORT_DESC="Utilities for inserting and removing PCMCIA cards"
    67.9  MAINTAINER="pankso@slitaz.org"
   67.10  LICENSE="GPL2"
   67.11  TARBALL="$PACKAGE-$VERSION.tar.bz2"
   67.12 @@ -18,7 +18,6 @@
   67.13  compile_rules()
   67.14  {
   67.15  	# We need lex...
   67.16 -	cd $src
   67.17  	make
   67.18  }
   67.19  

    68.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    68.2 +++ b/pcre/description.txt	Thu Apr 23 16:47:39 2015 +0300
    68.3 @@ -0,0 +1,2 @@
    68.4 +This is a library of functions to support regular expressions whose syntax and
    68.5 +semantics are as close as possible to those of the Perl 5 language.

    69.1 --- a/pcre/receipt	Thu Apr 23 15:42:00 2015 +0200
    69.2 +++ b/pcre/receipt	Thu Apr 23 16:47:39 2015 +0300
    69.3 @@ -3,7 +3,7 @@
    69.4  PACKAGE="pcre"
    69.5  VERSION="8.35"
    69.6  CATEGORY="system-tools"
    69.7 -SHORT_DESC="Perl Compatible Regular Expressions."
    69.8 +SHORT_DESC="Perl 5 Compatible Regular Expression Library"
    69.9  MAINTAINER="pankso@slitaz.org"
   69.10  LICENSE="BSD"
   69.11  TARBALL="$PACKAGE-$VERSION.tar.bz2"

    70.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    70.2 +++ b/pixman/description.txt	Thu Apr 23 16:47:39 2015 +0300
    70.3 @@ -0,0 +1,3 @@
    70.4 +A library for manipulating pixel regions -- a set of Y-X banded rectangles,
    70.5 +image compositing using the Porter/Duff model and implicit mask generation for
    70.6 +geometric primitives including trapezoids, triangles, and rectangles.

    71.1 --- a/pixman/receipt	Thu Apr 23 15:42:00 2015 +0200
    71.2 +++ b/pixman/receipt	Thu Apr 23 16:47:39 2015 +0300
    71.3 @@ -3,7 +3,7 @@
    71.4  PACKAGE="pixman"
    71.5  VERSION="0.32.6"
    71.6  CATEGORY="x-window"
    71.7 -SHORT_DESC="Pixman library"
    71.8 +SHORT_DESC="Pixel-manipulation library for X and Cairo"
    71.9  MAINTAINER="pankso@slitaz.org"
   71.10  LICENSE="MIT"
   71.11  TARBALL="$PACKAGE-$VERSION.tar.gz"

    72.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    72.2 +++ b/popt/description.txt	Thu Apr 23 16:47:39 2015 +0300
    72.3 @@ -0,0 +1,6 @@
    72.4 +Popt was heavily influenced by the getopt() and getopt_long() functions, but it
    72.5 +allows more powerful argument expansion. It can parse arbitrary argv[] style
    72.6 +arrays and automatically set variables based on command line arguments. It also
    72.7 +allows command line arguments to be aliased via configuration files and includes
    72.8 +utility functions for parsing arbitrary strings into argv[] arrays using
    72.9 +shell-like rules.

    73.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    73.2 +++ b/posixovl/description.txt	Thu Apr 23 16:47:39 2015 +0300
    73.3 @@ -0,0 +1,9 @@
    73.4 +With posixovl it is possible to mount FAT, VFAT, NTFS file system so that it
    73.5 +behaves like POSIX. File permissions, symbolic links etc. are supported
    73.6 +transparently. An extra file stores the information and the file system itself
    73.7 +stays unmodified. It is a modern equivalent of the UMSDOS file system.
    73.8 +
    73.9 +Typical use: Mount an USB FAT32 drive with posixovl and your files retain their
   73.10 +permission settings.
   73.11 +
   73.12 +This package extends mount and provides option '-t posixovl'.

    74.1 --- a/posixovl/receipt	Thu Apr 23 15:42:00 2015 +0200
    74.2 +++ b/posixovl/receipt	Thu Apr 23 16:47:39 2015 +0300
    74.3 @@ -3,12 +3,13 @@
    74.4  PACKAGE="posixovl"
    74.5  VERSION="1.2"
    74.6  CATEGORY="system-tools"
    74.7 -SHORT_DESC="A modern equivalent of the UMSDOS."
    74.8 +SHORT_DESC="FUSE file system that provides POSIX functionality"
    74.9  MAINTAINER="pascal.bellard@slitaz.org"
   74.10  LICENSE="GPL2"
   74.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
   74.12  WEB_SITE="http://$PACKAGE.sourceforge.net/"
   74.13  WGET_URL="$SF_MIRROR/$PACKAGE/$TARBALL"
   74.14 +TAGS="filesystem"
   74.15  
   74.16  DEPENDS="fuse attr"
   74.17  BUILD_DEPENDS="autoconf automake fuse-dev attr-dev"
   74.18 @@ -16,7 +17,7 @@
   74.19  # Rules to configure and make the package.
   74.20  compile_rules()
   74.21  {
   74.22 -	mv $PACKAGE $src 2> /dev/null
   74.23 +	mv $PACKAGE $src 2>/dev/null
   74.24  	cd $src
   74.25  	grep -q 'else if (!S_ISREG' posixovl.c ||
   74.26  	sed -i 's/if (!S_ISREG/if (S_ISLNK(cb->ll.mode))\n\t\tcb->sb.st_size = strlen(cb->ll.target);\n\telse &/' posixovl.c
   74.27 @@ -27,8 +28,8 @@
   74.28  	make
   74.29  }
   74.30  
   74.31 -# Rules to gen a SliTaz package suitable for Tazpkg.   
   74.32 -genpkg_rules()                                      
   74.33 +# Rules to gen a SliTaz package suitable for Tazpkg.
   74.34 +genpkg_rules()
   74.35  {
   74.36  	mkdir -p $fs/usr/sbin
   74.37  	cp $src/mount.posixovl $fs/usr/sbin 

    75.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    75.2 +++ b/ppp/description.txt	Thu Apr 23 16:47:39 2015 +0300
    75.3 @@ -0,0 +1,6 @@
    75.4 +The Point-to-Point Protocol provides a standard way to transmit datagrams over a
    75.5 +serial link, as well as a standard way for the machines at either end of the
    75.6 +link to negotiate various optional characteristics of the link.
    75.7 +
    75.8 +This package is most commonly used to manage a modem for dial-up or certain
    75.9 +kinds of broadband connections.

    76.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    76.2 +++ b/rp-pppoe/description.txt	Thu Apr 23 16:47:39 2015 +0300
    76.3 @@ -0,0 +1,6 @@
    76.4 +PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by many ADSL
    76.5 +Internet Service Providers. Roaring Penguin has a free client for Linux systems
    76.6 +to connect to PPPoE service providers.
    76.7 +
    76.8 +The client is a user-mode program and does not require any kernel modifications.
    76.9 +It is fully compliant with RFC 2516, the official PPPoE specification.

    77.1 --- a/rp-pppoe/receipt	Thu Apr 23 15:42:00 2015 +0200
    77.2 +++ b/rp-pppoe/receipt	Thu Apr 23 16:47:39 2015 +0300
    77.3 @@ -3,13 +3,13 @@
    77.4  PACKAGE="rp-pppoe"
    77.5  VERSION="3.10"
    77.6  CATEGORY="network"
    77.7 -SHORT_DESC="Tools to configure a PPPOE network connection."
    77.8 +SHORT_DESC="Roaring Penguin PPPoE client"
    77.9  MAINTAINER="pankso@slitaz.org"
   77.10  LICENSE="GPL2"
   77.11  TARBALL="$PACKAGE-$VERSION.tar.gz"
   77.12  WEB_SITE="http://www.roaringpenguin.com/products/pppoe"
   77.13  WGET_URL="http://www.roaringpenguin.com/files/download/$TARBALL"
   77.14 -TAGS="network pppoe"
   77.15 +TAGS="network PPPoE"
   77.16  HOST_ARCH="i486"
   77.17  
   77.18  BUILD_DEPENDS="ppp"

    78.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    78.2 +++ b/slim/description.txt	Thu Apr 23 16:47:39 2015 +0300
    78.3 @@ -0,0 +1,3 @@
    78.4 +SLiM aims to be light, simple and independent from the various desktop
    78.5 +environments. Although completely configurable through themes and an option
    78.6 +file. It is particularly suitable for machines that don't require remote logins.

    79.1 --- a/slim/receipt	Thu Apr 23 15:42:00 2015 +0200
    79.2 +++ b/slim/receipt	Thu Apr 23 16:47:39 2015 +0300
    79.3 @@ -3,7 +3,7 @@
    79.4  PACKAGE="slim"
    79.5  VERSION="1.3.5"
    79.6  CATEGORY="x-window"
    79.7 -SHORT_DESC="Desktop-independent graphical login manager for X11."
    79.8 +SHORT_DESC="Desktop-independent graphical login manager for X11"
    79.9  MAINTAINER="pankso@slitaz.org"
   79.10  LICENSE="GPL2"
   79.11  WEB_SITE="http://slim.berlios.de/"

    80.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    80.2 +++ b/xterm/description.txt	Thu Apr 23 16:47:39 2015 +0300
    80.3 @@ -0,0 +1,8 @@
    80.4 +xterm is a terminal emulator for the X Window System. It provides DEC VT102 and
    80.5 +Tektronix 4014 compatible terminals for programs that cannot use the window
    80.6 +system directly. This version implements ISO/ANSI colors and most of the control
    80.7 +sequences used by DEC VT220 terminals.
    80.8 +
    80.9 +This package provides commands: xterm, which is the traditional terminal
   80.10 +emulator; uxterm, which is a wrapper around xterm that is intelligent about
   80.11 +locale settings (especially those which use the UTF-8 character encoding).

    81.1 --- a/xterm/receipt	Thu Apr 23 15:42:00 2015 +0200
    81.2 +++ b/xterm/receipt	Thu Apr 23 16:47:39 2015 +0300
    81.3 @@ -3,7 +3,7 @@
    81.4  PACKAGE="xterm"
    81.5  VERSION="314"
    81.6  CATEGORY="utilities"
    81.7 -SHORT_DESC="X Terminal emulator."
    81.8 +SHORT_DESC="X terminal emulator"
    81.9  MAINTAINER="pankso@slitaz.org"
   81.10  LICENSE="MIT"
   81.11  TARBALL="$PACKAGE-$VERSION.tgz"

    82.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    82.2 +++ b/zlib/description.txt	Thu Apr 23 16:47:39 2015 +0300
    82.3 @@ -0,0 +1,2 @@
    82.4 +zlib is a library implementing the deflate compression method found in gzip and
    82.5 +PKZIP. This package includes the shared library.

    83.1 --- a/zlib/receipt	Thu Apr 23 15:42:00 2015 +0200
    83.2 +++ b/zlib/receipt	Thu Apr 23 16:47:39 2015 +0300
    83.3 @@ -3,7 +3,7 @@
    83.4  PACKAGE="zlib"
    83.5  VERSION="1.2.8"
    83.6  CATEGORY="base-system"
    83.7 -SHORT_DESC="Compression library."
    83.8 +SHORT_DESC="Compression library"
    83.9  MAINTAINER="pankso@slitaz.org"
   83.10  LICENSE="zlib/libpng"
   83.11  TARBALL="$PACKAGE-$VERSION.tar.xz"
   83.12 @@ -17,7 +17,6 @@
   83.13  # Rules to configure and make the package.
   83.14  compile_rules()
   83.15  {
   83.16 -	cd $src
   83.17  	case "$ARCH" in
   83.18  		i486)
   83.19  			# work around gcc bug; see https://bugs.archlinux.org/task/20647