SliTaz Repositories

     1.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.2 +++ b/hostapd/receipt	Thu Jul 15 22:52:54 2010 +0200
     1.3 @@ -0,0 +1,42 @@
     1.4 +# SliTaz package receipt.
     1.5 +
     1.6 +PACKAGE="hostapd"
     1.7 +VERSION="0.6.10"
     1.8 +CATEGORY="network"
     1.9 +SHORT_DESC="Daemon for wireless software access points."
    1.10 +MAINTAINER="gokhlayeh@mailoo.org"
    1.11 +DEPENDS="openssl libnl"
    1.12 +BUILD_DEPENDS="openssl-dev libnl-dev"
    1.13 +TARBALL="$PACKAGE-$VERSION.tar.gz"
    1.14 +WEB_SITE="http://hostap.epitest.fi/hostapd/"
    1.15 +WGET_URL="http://hostap.epitest.fi/releases/$TARBALL"
    1.16 +
    1.17 +# Rules to configure and make the package.
    1.18 +compile_rules()
    1.19 +{
    1.20 +	cp -a stuff/config $src/hostapd/.config
    1.21 +	mkdir -p $src/_pkg/usr/bin
    1.22 +
    1.23 +	cd $src/hostapd
    1.24 +
    1.25 +	sed -i "s|/usr/local/bin|$src/_pkg/usr/bin|" Makefile
    1.26 +	
    1.27 +	make && make DESTDIR=$PWD/_pkg install
    1.28 +}
    1.29 +
    1.30 +# Rules to gen a SliTaz package suitable for Tazpkg.
    1.31 +genpkg_rules()
    1.32 +{
    1.33 +	mkdir -p $fs/usr $fs/etc/hostapd $fs/etc/init.d
    1.34 +
    1.35 +	cp -a $_pkg/usr/bin $fs/usr
    1.36 +
    1.37 +	cp -a $src/hostapd/hostapd.accept $src/hostapd/hostapd.conf \
    1.38 +		$src/hostapd/hostapd.deny $src/hostapd/hostapd.eap_user \
    1.39 +		$src/hostapd/hostapd.radius_clients $src/hostapd/hostapd.sim_db \
    1.40 +		$src/hostapd/hostapd.vlan $src/hostapd/hostapd.wpa_psk \
    1.41 +		$src/hostapd/wired.conf $src/src/hlr_auc_gw/hlr_auc_gw.milenage_db \
    1.42 +		$fs/etc/hostapd
    1.43 +
    1.44 +	cp -a stuff/hostapd $fs/etc/init.d
    1.45 +}

     2.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     2.2 +++ b/hostapd/stuff/config	Thu Jul 15 22:52:54 2010 +0200
     2.3 @@ -0,0 +1,92 @@
     2.4 +# Example hostapd build time configuration
     2.5 +#
     2.6 +# This file lists the configuration options that are used when building the
     2.7 +# hostapd binary. All lines starting with # are ignored. Configuration option
     2.8 +# lines must be commented out complete, if they are not to be included, i.e.,
     2.9 +# just setting VARIABLE=n is not disabling that variable.
    2.10 +#
    2.11 +# This file is included in Makefile, so variables like CFLAGS and LIBS can also
    2.12 +# be modified from here. In most cass, these lines should use += in order not
    2.13 +# to override previous values of the variables.
    2.14 +
    2.15 +# Driver interface for Host AP driver
    2.16 +CONFIG_DRIVER_HOSTAP=y
    2.17 +
    2.18 +# Driver interface for wired authenticator
    2.19 +CONFIG_DRIVER_WIRED=y
    2.20 +
    2.21 +# Driver interface for madwifi driver
    2.22 +#CONFIG_DRIVER_MADWIFI=y
    2.23 +#CFLAGS += -I/usr  # change to reflect local setup; directory for madwifi src
    2.24 +
    2.25 +# Driver interface for Prism54 driver
    2.26 +CONFIG_DRIVER_PRISM54=y
    2.27 +
    2.28 +# IEEE 802.11F/IAPP
    2.29 +CONFIG_IAPP=y
    2.30 +
    2.31 +# WPA2/IEEE 802.11i RSN pre-authentication
    2.32 +CONFIG_RSN_PREAUTH=y
    2.33 +
    2.34 +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
    2.35 +CONFIG_PEERKEY=y
    2.36 +
    2.37 +# IEEE 802.11w (management frame protection)
    2.38 +# This version is an experimental implementation based on IEEE 802.11w/D1.0
    2.39 +# draft and is subject to change since the standard has not yet been finalized.
    2.40 +# Driver support is also needed for IEEE 802.11w.
    2.41 +CONFIG_IEEE80211W=y
    2.42 +
    2.43 +# Integrated EAP server
    2.44 +CONFIG_EAP=y
    2.45 +
    2.46 +# EAP-MD5 for the integrated EAP server
    2.47 +CONFIG_EAP_MD5=y
    2.48 +
    2.49 +# EAP-TLS for the integrated EAP server
    2.50 +CONFIG_EAP_TLS=y
    2.51 +
    2.52 +# EAP-MSCHAPv2 for the integrated EAP server
    2.53 +CONFIG_EAP_MSCHAPV2=y
    2.54 +
    2.55 +# EAP-PEAP for the integrated EAP server
    2.56 +CONFIG_EAP_PEAP=y
    2.57 +
    2.58 +# EAP-GTC for the integrated EAP server
    2.59 +CONFIG_EAP_GTC=y
    2.60 +
    2.61 +# EAP-TTLS for the integrated EAP server
    2.62 +CONFIG_EAP_TTLS=y
    2.63 +
    2.64 +# EAP-SIM for the integrated EAP server
    2.65 +CONFIG_EAP_SIM=y
    2.66 +
    2.67 +# EAP-AKA for the integrated EAP server
    2.68 +CONFIG_EAP_AKA=y
    2.69 +
    2.70 +# EAP-PAX for the integrated EAP server
    2.71 +CONFIG_EAP_PAX=y
    2.72 +
    2.73 +# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
    2.74 +CONFIG_EAP_PSK=y
    2.75 +
    2.76 +# EAP-SAKE for the integrated EAP server
    2.77 +CONFIG_EAP_SAKE=y
    2.78 +
    2.79 +# EAP-GPSK for the integrated EAP server
    2.80 +CONFIG_EAP_GPSK=y
    2.81 +# Include support for optional SHA256 cipher suite in EAP-GPSK
    2.82 +CONFIG_EAP_GPSK_SHA256=y
    2.83 +
    2.84 +# PKCS#12 (PFX) support (used to read private key and certificate file from
    2.85 +# a file that usually has extension .p12 or .pfx)
    2.86 +CONFIG_PKCS12=y
    2.87 +
    2.88 +# RADIUS authentication server. This provides access to the integrated EAP
    2.89 +# server from external hosts using RADIUS.
    2.90 +CONFIG_RADIUS_SERVER=y
    2.91 +
    2.92 +# Build IPv6 support for RADIUS operations
    2.93 +CONFIG_IPV6=y
    2.94 +
    2.95 +CONFIG_DRIVER_NL80211=y

     3.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     3.2 +++ b/hostapd/stuff/hostapd	Thu Jul 15 22:52:54 2010 +0200
     3.3 @@ -0,0 +1,53 @@
     3.4 +#!/bin/sh
     3.5 +# /etc/init.d/dbus: Start, stop and restart DBUS daemon on SliTaz,
     3.6 +# at boot time or with the command line. Daemons options are configured
     3.7 +# with /etc/daemons.conf
     3.8 +#
     3.9 +. /etc/init.d/rc.functions
    3.10 +. /etc/daemons.conf
    3.11 +
    3.12 +NAME=hostapd
    3.13 +DESC="daemon for wireless software access points"
    3.14 +DAEMON=/usr/bin/hostapd
    3.15 +PIDFILE=/var/run/hostapd.pid
    3.16 +OPTIONS="-B -P $PIDFILE /etc/hostapd/hostapd.conf"
    3.17 +
    3.18 +case "$1" in
    3.19 +  start)
    3.20 +    if [ -f $PIDFILE ] ; then
    3.21 +      echo "$NAME already running."
    3.22 +      exit 1
    3.23 +    fi
    3.24 +    echo -n "Starting $DESC: $NAME... "
    3.25 +    $DAEMON $OPTIONS
    3.26 +    status
    3.27 +    ;;
    3.28 +  stop)
    3.29 +    if [ ! -f $PIDFILE ] ; then
    3.30 +      echo "$NAME is not running."
    3.31 +      exit 1
    3.32 +    fi
    3.33 +    echo -n "Stopping $DESC: $NAME... "
    3.34 +    kill `cat $PIDFILE`
    3.35 +    status
    3.36 +    ;;
    3.37 +  restart)
    3.38 +    if [ ! -f $PIDFILE ] ; then
    3.39 +      echo "$NAME is not running."
    3.40 +      exit 1
    3.41 +    fi
    3.42 +    echo -n "Restarting $DESC: $NAME... "
    3.43 +    kill `cat $PIDFILE`
    3.44 +    sleep 2
    3.45 +    $DAEMON $OPTIONS
    3.46 +    status
    3.47 +    ;;
    3.48 +  *)
    3.49 +    echo ""
    3.50 +    echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]"
    3.51 +    echo ""
    3.52 +    exit 1
    3.53 +    ;;
    3.54 +esac
    3.55 +
    3.56 +exit 0
    3.57 \ No newline at end of file