wok-tiny rev 94
Refresh, remove kernel*, add linux
line diff
1.1 --- a/base-tiny/receipt Thu Jul 18 13:24:21 2013 +0000 1.2 +++ b/base-tiny/receipt Fri Oct 02 21:45:05 2015 +0200 1.3 @@ -2,49 +2,19 @@ 1.4 1.5 PACKAGE="base-tiny" 1.6 VERSION="1.0" 1.7 -CATEGORY="configuration" 1.8 +CATEGORY="misc" 1.9 SHORT_DESC="Tiny SliTaz base configuration files" 1.10 MAINTAINER="pascal.bellard@slitaz.org" 1.11 LICENSE="BSD" 1.12 WEB_SITE="http://tiny.slitaz.org/" 1.13 AUTO_SELECTION="always" 1.14 -CONFIG_FILES="/etc/network.conf /etc/passwd /etc/shadow \ 1.15 +CONFIG_FILES="/etc/network.conf /etc/rcS.conf /etc/passwd /etc/shadow \ 1.16 /root/.profile /etc/fstab /etc/init.d/local.sh" 1.17 1.18 -# Rules to configure and make the package. 1.19 -compile_rules() 1.20 -{ 1.21 - mkdir -p fs/var/lib fs/etc 1.22 - echo "none" > fs/var/lib/detected-modules 1.23 - echo "LANG=C" > fs/etc/locale.conf 1.24 - while read pkg file ; do 1.25 - if [ ! -s $pkg*/fs$file ]; then 1.26 - tazpkg get $pkg 1.27 - tazpkg extract $pkg*.tazpkg 1.28 - fi 1.29 - mkdir -p fs$(dirname $file) 1.30 - mv $pkg*/fs$file fs$(dirname $file) || return 1 1.31 - done << EOT 1.32 -busybox /etc/udhcpd.conf 1.33 -busybox /etc/inetd.conf 1.34 -slitaz-base-files /etc/fstab 1.35 -slitaz-base-files /etc/group 1.36 -slitaz-base-files /etc/passwd 1.37 -slitaz-base-files /etc/gshadow 1.38 -slitaz-base-files /etc/shadow 1.39 -slitaz-boot-scripts /etc/inittab 1.40 -slitaz-boot-scripts /etc/network.conf 1.41 -slitaz-boot-scripts /etc/init.d/local.sh 1.42 -slitaz-boot-scripts /etc/rcS.conf 1.43 -EOT 1.44 - sed -i 's/:x:/:!:/' fs/etc/passwd 1.45 - sed -i 's/UDEV=.*/UDEV="no"/;s/hwconf.sh l/l/' fs/etc/rcS.conf 1.46 -} 1.47 - 1.48 # Rules to gen a SliTaz package suitable for Tazpkg. 1.49 genpkg_rules() 1.50 { 1.51 - cp -a fs/. $fs 1.52 + cp -a $stuff/. $fs 1.53 } 1.54 1.55 config_form() 1.56 @@ -155,4 +125,7 @@ 1.57 [ -n "$RC_LOCAL" ] && dos2unix >> $1/etc/init.d/local.sh <<EOT 1.58 $RC_LOCAL 1.59 EOT 1.60 + [ -s $1/modules ] && for i in $(cat $1/modules ; rm -f $1/modules); do 1.61 + sed -i "s/LOAD_MODULES=./&$i /" $1/etc/rcS.conf 1.62 + done 1.63 }
2.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 2.2 +++ b/base-tiny/stuff/dev/core Fri Oct 02 21:45:05 2015 +0200 2.3 @@ -0,0 +1,1 @@ 2.4 +/proc/kcore 2.5 \ No newline at end of file
3.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 3.2 +++ b/base-tiny/stuff/dev/fd Fri Oct 02 21:45:05 2015 +0200 3.3 @@ -0,0 +1,1 @@ 3.4 +/proc/self/fd 3.5 \ No newline at end of file
4.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 4.2 +++ b/base-tiny/stuff/dev/ram Fri Oct 02 21:45:05 2015 +0200 4.3 @@ -0,0 +1,1 @@ 4.4 +ram1 4.5 \ No newline at end of file
5.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 5.2 +++ b/base-tiny/stuff/dev/stderr Fri Oct 02 21:45:05 2015 +0200 5.3 @@ -0,0 +1,1 @@ 5.4 +/proc/self/fd/2 5.5 \ No newline at end of file
6.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 6.2 +++ b/base-tiny/stuff/dev/stdin Fri Oct 02 21:45:05 2015 +0200 6.3 @@ -0,0 +1,1 @@ 6.4 +/proc/self/fd/0 6.5 \ No newline at end of file
7.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 7.2 +++ b/base-tiny/stuff/dev/stdout Fri Oct 02 21:45:05 2015 +0200 7.3 @@ -0,0 +1,1 @@ 7.4 +/proc/self/fd/1 7.5 \ No newline at end of file
8.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 8.2 +++ b/base-tiny/stuff/dev/vcs Fri Oct 02 21:45:05 2015 +0200 8.3 @@ -0,0 +1,1 @@ 8.4 +vcs0 8.5 \ No newline at end of file
9.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 9.2 +++ b/base-tiny/stuff/dev/vcsa Fri Oct 02 21:45:05 2015 +0200 9.3 @@ -0,0 +1,1 @@ 9.4 +vcsa0 9.5 \ No newline at end of file
10.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 10.2 +++ b/base-tiny/stuff/etc/busybox.conf Fri Oct 02 21:45:05 2015 +0200 10.3 @@ -0,0 +1,12 @@ 10.4 +# /etc/busybox.conf: SliTaz GNU/linux Busybox configuration. 10.5 +# 10.6 + 10.7 +[SUID] 10.8 +# Allow command to be run by anyone. 10.9 +su = ssx root.root 10.10 +passwd = ssx root.root 10.11 +loadkmap = ssx root.root 10.12 +mount = ssx root.root 10.13 +reboot = ssx root.root 10.14 +halt = ssx root.root 10.15 +poweroff = ssx root.root
11.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 11.2 +++ b/base-tiny/stuff/etc/daemons.conf Fri Oct 02 21:45:05 2015 +0200 11.3 @@ -0,0 +1,24 @@ 11.4 +# /etc/daemons.conf - Daemons options configuration file. 11.5 +# 11.6 +# This file is used for setting options to start daemons at boot time or from 11.7 +# the command line (/etc/init.d/daemon-name start). Please check /etc/rcS.conf 11.8 +# to automatically start a daemon at boot. 11.9 +# 11.10 + 11.11 +# Dropbear SSH server options. 11.12 +DROPBEAR_OPTIONS="-b /etc/dropbear/banner" 11.13 + 11.14 +# Cron daemon options. 11.15 +CROND_OPTIONS="-b" 11.16 + 11.17 +# Domain Name Server options. 11.18 +DNSD_OPTIONS="-d" 11.19 + 11.20 +# Super server options. 11.21 +INETD_OPTIONS="" 11.22 + 11.23 +# Tftp daemon options. 11.24 +TFTPD_OPTIONS="-r /boot" 11.25 + 11.26 +# Busybox HTTP web server options. 11.27 +HTTPD_OPTIONS="-u www"
12.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 12.2 +++ b/base-tiny/stuff/etc/fstab Fri Oct 02 21:45:05 2015 +0200 12.3 @@ -0,0 +1,6 @@ 12.4 +# /etc/fstab: Information about static filesystems. 12.5 +# 12.6 +proc /proc proc defaults 0 0 12.7 +sysfs /sys sysfs defaults 0 0 12.8 +devpts /dev/pts devpts rw,gid=5,mode=0620 0 0 12.9 +tmpfs /dev/shm tmpfs defaults 0 0
13.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 13.2 +++ b/base-tiny/stuff/etc/group Fri Oct 02 21:45:05 2015 +0200 13.3 @@ -0,0 +1,20 @@ 13.4 +root:x:0: 13.5 +daemon:x:1: 13.6 +bin:x:2: 13.7 +sys:x:3: 13.8 +adm:x:4: 13.9 +tty:x:5: 13.10 +disk:x:6:root 13.11 +lp:x:7: 13.12 +kmem:x:9: 13.13 +wheel:x:10:root 13.14 +floppy:x:11: 13.15 +video:x:18: 13.16 +cdrom:x:19: 13.17 +audio:x:20: 13.18 +tape:x:26: 13.19 +www:x:80: 13.20 +plugdev:x:83: 13.21 +dialout:x:95: 13.22 +nogroup:x:99: 13.23 +users:x:100:
14.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 14.2 +++ b/base-tiny/stuff/etc/gshadow Fri Oct 02 21:45:05 2015 +0200 14.3 @@ -0,0 +1,20 @@ 14.4 +root:*:: 14.5 +daemon:!:: 14.6 +bin:!:: 14.7 +sys:!:: 14.8 +adm:!:: 14.9 +tty:!:: 14.10 +disk:!::root 14.11 +lp:!:: 14.12 +kmem:!:: 14.13 +wheel:!::root 14.14 +floppy:!:: 14.15 +video:!:: 14.16 +cdrom:!:: 14.17 +audio:!:: 14.18 +tape:!:: 14.19 +www:!:: 14.20 +plugdev:!:: 14.21 +dialout:!:: 14.22 +nogroup:!:: 14.23 +users:!::
15.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 15.2 +++ b/base-tiny/stuff/etc/host.conf Fri Oct 02 21:45:05 2015 +0200 15.3 @@ -0,0 +1,2 @@ 15.4 +order hosts,bind 15.5 +multi on
16.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 16.2 +++ b/base-tiny/stuff/etc/hostname Fri Oct 02 21:45:05 2015 +0200 16.3 @@ -0,0 +1,1 @@ 16.4 +slitaz
17.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 17.2 +++ b/base-tiny/stuff/etc/hosts Fri Oct 02 21:45:05 2015 +0200 17.3 @@ -0,0 +1,1 @@ 17.4 +127.0.0.1 localhost slitaz tazpanel
18.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 18.2 +++ b/base-tiny/stuff/etc/inetd.conf Fri Oct 02 21:45:05 2015 +0200 18.3 @@ -0,0 +1,34 @@ 18.4 +# Internet server configuration database 18.5 +# 18.6 +# 18.7 +# If you want to disable an entry so it isn't touched during 18.8 +# package updates just comment it out with a single '#' character. 18.9 +# 18.10 +# If you make changes to this file, either reboot your machine or 18.11 +# send the inetd process a HUP signal: 18.12 +# Do a "ps x" as root and look up the pid of inetd. Then do a 18.13 +# kill -HUP <pid of inetd> 18.14 +# inetd will re-read this file whenever it gets that signal. 18.15 +# <service_name> <sock_type> <proto> <flags> <user> <server_path> <args> 18.16 +# 18.17 +#:INTERNAL: Internal services 18.18 +# It is generally considered safer to keep these off. 18.19 +echo stream tcp nowait root internal 18.20 +echo dgram udp wait root internal 18.21 +#discard stream tcp nowait root internal 18.22 +#discard dgram udp wait root internal 18.23 +daytime stream tcp nowait root internal 18.24 +daytime dgram udp wait root internal 18.25 +#chargen stream tcp nowait root internal 18.26 +#chargen dgram udp wait root internal 18.27 +time stream tcp nowait root internal 18.28 +time dgram udp wait root internal 18.29 + 18.30 +# These are standard services. 18.31 +# 18.32 +#tftp dgram udp wait root tftpd tftpd -r /boot 18.33 +#systat stream tcp nowait nobody ps 18.34 +#netstat stream tcp nowait root netstat netstat -a 18.35 +#http stream tcp nowait root httpd httpd -i -u 80:80 18.36 +#ftp stream tcp nowait root ftpd ftpd -w /home/ftp 18.37 +#telnet stream tcp nowait root telnetd telnetd -i
19.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 19.2 +++ b/base-tiny/stuff/etc/init.d/local.sh Fri Oct 02 21:45:05 2015 +0200 19.3 @@ -0,0 +1,9 @@ 19.4 +#!/bin/sh 19.5 +# /etc/init.d/local.sh - Local startup commands. 19.6 +# 19.7 +# All commands here will be executed at boot time. 19.8 +# 19.9 +. /etc/init.d/rc.functions 19.10 + 19.11 +echo "Starting local startup commands... " 19.12 +
20.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 20.2 +++ b/base-tiny/stuff/etc/init.d/network.sh Fri Oct 02 21:45:05 2015 +0200 20.3 @@ -0,0 +1,95 @@ 20.4 +#!/bin/sh 20.5 +# /etc/init.d/network.sh - Network initialization boot script. 20.6 +# Config file is: /etc/network.conf 20.7 +# 20.8 +. /etc/init.d/rc.functions 20.9 + 20.10 +if [ -z "$2" ]; then 20.11 + . /etc/network.conf 20.12 +else 20.13 + . $2 20.14 +fi 20.15 + 20.16 +boot() { 20.17 + # Set hostname. 20.18 + echo -n "Setting hostname..." 20.19 + hostname -F /etc/hostname 20.20 + status 20.21 + 20.22 + # Configure loopback interface. 20.23 + echo -n "Configuring loopback..." 20.24 + ifconfig lo 127.0.0.1 up 20.25 + route add 127.0.0.1 lo 20.26 + status 20.27 +} 20.28 + 20.29 +# Use ethernet 20.30 +eth() { 20.31 + ifconfig $INTERFACE up 20.32 +} 20.33 + 20.34 +# For a dynamic IP with DHCP. 20.35 +dhcp() { 20.36 + if [ "$DHCP" = "yes" ] ; then 20.37 + echo "Starting udhcpc client on: $INTERFACE..." 20.38 + udhcpc -b -T 1 -A 12 -i $INTERFACE -p \ 20.39 + /var/run/udhcpc.$INTERFACE.pid 20.40 + fi 20.41 +} 20.42 + 20.43 +# For a static IP. 20.44 +static_ip() { 20.45 + if [ "$STATIC" = "yes" ] ; then 20.46 + echo "Configuring static IP on $INTERFACE: $IP..." 20.47 + ifconfig $INTERFACE $IP netmask $NETMASK up 20.48 + route add default gateway $GATEWAY 20.49 + # Multi-DNS server in $DNS_SERVER. 20.50 + mv /etc/resolv.conf /tmp/resolv.conf.$$ 20.51 + for NS in $DNS_SERVER 20.52 + do 20.53 + echo "nameserver $NS" >> /etc/resolv.conf 20.54 + done 20.55 + for HELPER in /etc/ipup.d/*; do 20.56 + [ -x $HELPER ] && $HELPER $INTERFACE $DNS_SERVER 20.57 + done 20.58 + fi 20.59 +} 20.60 + 20.61 +# Stopping everything 20.62 +Stop() { 20.63 + echo "Stopping all interfaces" 20.64 + ifconfig $INTERFACE down 20.65 + 20.66 + echo "Killing all daemons" 20.67 + killall udhcpc 20.68 +} 20.69 + 20.70 +Start() { 20.71 + eth 20.72 + dhcp 20.73 + static_ip 20.74 +} 20.75 + 20.76 +# looking for arguments: 20.77 +if [ -z "$1" ]; then 20.78 + boot 20.79 + Start 20.80 +else 20.81 + case $1 in 20.82 + start) 20.83 + Start ;; 20.84 + stop) 20.85 + Stop ;; 20.86 + restart) 20.87 + Stop 20.88 + Start ;; 20.89 + *) 20.90 + echo "" 20.91 + echo -e "\033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart]" 20.92 + echo "" 20.93 + echo -e " Default configuration file is \033[1m/etc/network.conf\033[0m" 20.94 + echo -e " You can specify another configuration file in the second argument:" 20.95 + echo -e " \033[1mUsage:\033[0m /etc/init.d/`basename $0` [start|stop|restart] file.conf" 20.96 + echo "" ;; 20.97 + esac 20.98 +fi
21.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 21.2 +++ b/base-tiny/stuff/etc/init.d/rc.functions Fri Oct 02 21:45:05 2015 +0200 21.3 @@ -0,0 +1,28 @@ 21.4 +#!/bin/sh 21.5 +# /etc/init.d/rc.functions: SliTaz boot scripts functions. 21.6 +# 21.7 + 21.8 +# Status functions. 21.9 +status() { 21.10 + echo -en "\\033[70G[ " 21.11 + if [ $? = 0 ]; then 21.12 + echo -en "\\033[1;32mOK" 21.13 + else 21.14 + echo -en "\\033[1;31mFailed" 21.15 + fi 21.16 + echo -e "\\033[0;39m ]" 21.17 +} 21.18 + 21.19 +# Check daemon with pidfile: usage check_pidfile $PIDFILE $DAEMON 21.20 +active_pidfile() 21.21 +{ 21.22 + if [ ! -e $1 ]; then 21.23 + return 1 21.24 + elif grep -qs "Name:.$(basename $2)$" \ 21.25 + /proc/$(sed 's/[^0-9]//g' < $1 | head -n 1)/status ; then 21.26 + return 0 21.27 + else 21.28 + rm -f $1 21.29 + return 2 21.30 + fi 21.31 +}
22.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 22.2 +++ b/base-tiny/stuff/etc/init.d/rc.shutdown Fri Oct 02 21:45:05 2015 +0200 22.3 @@ -0,0 +1,32 @@ 22.4 +#!/bin/sh 22.5 +# /etc/init.d/rc.shutdown - This script is used by /etc/inittab to stop 22.6 +# all daemons and shutdown the system. 22.7 +# 22.8 +. /etc/init.d/rc.functions 22.9 +. /etc/rcS.conf 22.10 + 22.11 +log=/var/lib/shutdown.log 22.12 + 22.13 +# Bold info message with uptime 22.14 +clear && echo "System is going down for reboot or halt." > $log 22.15 +uptime >> $log 22.16 + 22.17 +# Stop all daemons started at boot time. 22.18 +for daemon in $RUN_DAEMONS 22.19 +do 22.20 + if [ -x /etc/init.d/$daemon ]; then 22.21 + /etc/init.d/$daemon stop >> $log 22.22 + fi 22.23 +done 22.24 + 22.25 +# Sync all filesystems. 22.26 +sync 22.27 + 22.28 +# Swap off. 22.29 +swapoff -a 22.30 + 22.31 +# Kill all processes. 22.32 +killall5 22.33 + 22.34 +# Umount filesystems. 22.35 +umount -a -r 2>/dev/null
23.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 23.2 +++ b/base-tiny/stuff/etc/init.d/rcS Fri Oct 02 21:45:05 2015 +0200 23.3 @@ -0,0 +1,249 @@ 23.4 +#!/bin/sh 23.5 +# /etc/init.d/rcS - Initial boot script for SliTaz GNU/Linux. 23.6 +# Config file is : /etc/rcS.conf 23.7 +# 23.8 +# rcS is the main initialization script used to check fs, mount, clean, 23.9 +# run scripts and start daemons. 23.10 +# 23.11 +. /etc/init.d/rc.functions 23.12 +. /etc/rcS.conf 23.13 + 23.14 +# Set TZ and boot time. 23.15 +[ -s /etc/TZ ] && export TZ="$(cat /etc/TZ)" 23.16 +[ "$bootdate" ] || bootdate=$(date +%s) 23.17 + 23.18 +case "$1" in 23.19 + 23.20 +readonly) 23.21 + 23.22 +echo "Processing /etc/init.d/rcS..." 23.23 + 23.24 +# Mount /proc. 23.25 +echo -n "Mounting proc filesystem..." 23.26 +mount proc 23.27 +status 23.28 + 23.29 +if [ "$EARLY_RUN_SCRIPTS" ]; then 23.30 + echo "Executing early initialization scripts..." 23.31 + for script in $EARLY_RUN_SCRIPTS 23.32 + do 23.33 + [ -x /etc/init.d/$script ] && /etc/init.d/$script 23.34 + done 23.35 +fi 23.36 + 23.37 +# Load all modules listed in config file. 23.38 +if [ "$LOAD_MODULES" ]; then 23.39 + echo -n "Loading modules..." 23.40 + for mod in $LOAD_MODULES 23.41 + do 23.42 + echo -n " ${mod%%|*}" 23.43 + modprobe ${mod//|/ } 23.44 + done 23.45 + status 23.46 + [ "$KEEP_MODULES" ] || rm -rf /lib/modules 23.47 +fi 23.48 + 23.49 +# Mount /sys. 23.50 +echo -n "Mounting sys filesystem..." 23.51 +mount sysfs 23.52 +status 23.53 + 23.54 +echo -n "Updating /dev..." 23.55 +for i in /sys/block/*/dev /sys/block/*/*/dev ; do 23.56 + [ -s "$i" ] || continue 23.57 + n=${i%/dev} 23.58 + n=/dev/${n##*/} 23.59 + [ -e $n ] && continue 23.60 + echo -n " ${n##*/}" 23.61 + mknod $n b $(sed 's/:/ /' < $i) 23.62 +done 23.63 +status 23.64 + 23.65 +# Before mounting filesystems we check fs specified in the file 23.66 +# /etc/rcS.conf and variable $CHECK_FS. 23.67 +if [ "$CHECK_FS" ]; then 23.68 + mount -o remount,ro / 23.69 + for i in $CHECK_FS 23.70 + do 23.71 + echo "Checking filesystem on : $i" 23.72 + e2fsck -p $i 23.73 + done 23.74 +fi 23.75 + 23.76 +# Remount rootfs rw. 23.77 +echo "Remounting rootfs read/write..." 23.78 +mount -o remount,rw / 23.79 +;; 23.80 + 23.81 +readwrite) 23.82 + 23.83 +# Mount filesystems in /etc/fstab. 23.84 +echo "Mounting filesystems in fstab..." 23.85 +mount -a 23.86 +;; 23.87 + 23.88 +logged) 23.89 + 23.90 +# Store boot messages to log files. 23.91 +dmesg > /var/log/dmesg.log & 23.92 + 23.93 +# Parse cmdline args for earlier boot options. All other boot options 23.94 +# are in /etc/init./bootopts.sh. 23.95 +echo -n "Searching for early boot options..." 23.96 +for opt in $(cat /proc/cmdline) 23.97 +do 23.98 + case $opt in 23.99 + cdrom=*) 23.100 + export CDROM=${opt#cdrom=} ;; 23.101 + modprobe=*) 23.102 + export MODPROBE="yes" ;; 23.103 + config=*) 23.104 + export CONFIG=${opt#config=} ;; 23.105 + *) 23.106 + continue ;; 23.107 + esac 23.108 +done 23.109 +status 23.110 + 23.111 +# Clean up the system. 23.112 +if [ "$CLEAN_UP_SYSTEM" = "yes" ]; then 23.113 + echo -n "Cleaning up the system..." 23.114 + find /var/run -name "*.pid" -type f | xargs rm -f 23.115 + rm -rf /tmp /var/lock/* 23.116 + mkdir -p /tmp && chmod 1777 /tmp 23.117 + status 23.118 +else 23.119 + echo "System clean up is disabled in /etc/rcS.conf..." 23.120 + echo -n "Keeping all tmp and pid files..." 23.121 + status 23.122 +fi 23.123 + 23.124 +# Create /dev/cdrom if needed (symlink does not exist on LiveCD). 23.125 +# Also add /dev/cdrom to fstab if entry does not exist. 23.126 +if [ "$CDROM" ]; then 23.127 + DRIVE_NAME=${CDROM#/dev/} 23.128 +else 23.129 + DRIVE_NAME=$(fgrep -s "drive name" /proc/sys/dev/cdrom/info | cut -f 3) 23.130 +fi 23.131 +if [ -n "$DRIVE_NAME" -a ! "$(readlink /dev/cdrom)" ]; then 23.132 + echo -n "Creating symlink : /dev/cdrom..." 23.133 + ln -s /dev/$DRIVE_NAME /dev/cdrom 23.134 + ln -s /dev/$DRIVE_NAME /dev/dvd 23.135 + chmod 0666 /dev/cdrom /dev/dvd /dev/$DRIVE_NAME 23.136 + status 23.137 +fi 23.138 +if ! fgrep -q "/dev/cdrom" /etc/fstab; then 23.139 + echo -n "Adding /dev/cdrom to fstab..." 23.140 + echo '/dev/cdrom /media/cdrom iso9660 user,ro,noauto 0 0' \ 23.141 + >> /etc/fstab 23.142 + status 23.143 +fi 23.144 + 23.145 +# Handle kernel cmdline parameter modprobe=<module_list> 23.146 +if [ "$MODPROBE" ]; then 23.147 + MODULES=$(sed -e 's/.* modprobe=\([^ ]*\).*/\1/' -e 's/,/\n/g' < /proc/cmdline) 23.148 + for i in $MODULES; do 23.149 + echo -n "Loading kernel module $i" 23.150 + modprobe $i 23.151 + status 23.152 + done 23.153 +fi 23.154 + 23.155 +# Handle kernel cmdline parameter config=<device>,<path> to source a 23.156 +# disk init script 23.157 +if [ "$CONFIG" ]; then 23.158 + DEVICE=${CONFIG%,*} 23.159 + SCRIPT=${CONFIG#*,} 23.160 + echo "Probing $DEVICE... " 23.161 + if ! mount -r $DEVICE /mnt; then 23.162 + if echo $DEVICE | grep -Eq "/dev/sd|UUID=|LABEL="; then 23.163 + USBDELAY=$(cat /sys/module/usb_storage/parameters/delay_use) 23.164 + USBDELAY=$((1+$USBDELAY)) 23.165 + echo "$DEVICE is potentially a USB device: sleep for $USBDELAY seconds" 23.166 + sleep $USBDELAY 23.167 + fi 23.168 + if ! mount -r $DEVICE /mnt; then 23.169 + CONFIG="" 23.170 + fi 23.171 + fi 23.172 + echo -n "Source $SCRIPT from $DEVICE..." 23.173 + if [ "$CONFIG" ]; then 23.174 + . /mnt/$SCRIPT 23.175 + umount /mnt 2> /dev/null || true 23.176 + fi 23.177 + status 23.178 +fi 23.179 + 23.180 +# Mount /proc/bus/usb. 23.181 +if [ -d /proc/bus/usb ]; then 23.182 + echo -n "Mounting /proc/bus/usb filesystem..." 23.183 + mount -t usbfs usbfs /proc/bus/usb 23.184 + status 23.185 +fi 23.186 + 23.187 +# Start syslogd and klogd. 23.188 +if [ "$KERNEL_LOG_DAEMONS" = "yes" ]; then 23.189 + echo -n "Starting system log deamon: syslogd..." 23.190 + syslogd -s $SYSLOGD_ROTATED_SIZE && status 23.191 + echo -n "Starting kernel log daemon: klogd..." 23.192 + klogd && status 23.193 +else 23.194 + echo "Kernel log daemons are disabled in /etc/rc.conf..." 23.195 +fi 23.196 + 23.197 +[ -d /usr/share/kmap ] && 23.198 +echo "Load keymap $(basename /usr/share/kmap/* .kmap)" && 23.199 +cat /usr/share/kmap/* | loadkmap && 23.200 +rm -rf /usr/share/kmap 23.201 + 23.202 +# Start all scripts specified with $RUN_SCRIPTS. 23.203 +echo "Executing all initialization scripts..." 23.204 +for script in $RUN_SCRIPTS 23.205 +do 23.206 + [ -x /etc/init.d/$script ] && /etc/init.d/$script 23.207 +done 23.208 + 23.209 +# Re-source main config file. In Live mode, daemons list can be modified 23.210 +# by boot options (screen=text will remove slim). 23.211 +. /etc/rcS.conf 23.212 + 23.213 +# Start all daemons specified with $RUN_DAEMONS. 23.214 +echo "Starting all daemons specified in /etc/rcS.conf..." 23.215 +for daemon in $RUN_DAEMONS 23.216 +do 23.217 + if [ -x /etc/init.d/$daemon ]; then 23.218 + /etc/init.d/$daemon start 23.219 + fi 23.220 +done 23.221 + 23.222 +# Reset screen and display a bold message. 23.223 +if [ "$MESSAGE" ]; then 23.224 + reset 23.225 + echo -e "\033[1m$MESSAGE\033[0m" 23.226 +fi 23.227 + 23.228 +# Display and log boot time. 23.229 +time=$(($(date +%s) - $bootdate)) 23.230 +echo $time > /var/log/boot-time 23.231 +echo "SliTaz boot time: ${time}s" 23.232 +;; 23.233 + 23.234 +*) 23.235 +if [ ! -s /dev/shm/boot.log ]; then 23.236 + mount -t devpts devpts /dev/pts 23.237 + mount -t tmpfs tmpfs /dev/shm 23.238 +fi 23.239 +script -aqc '/etc/init.d/rcS readonly' /dev/shm/boot.log 23.240 +mv -f /dev/shm/boot.log /boot.log 23.241 +umount /dev/shm 23.242 +script -aqc '/etc/init.d/rcS readwrite' /boot.log 23.243 +last=.9 23.244 +for i in .8 .7 .6 .5 .4 .3 .2 .1 .0 '' ; do 23.245 + mv -f /var/log/boot.log$i /var/log/boot.log$last 2>/dev/null 23.246 + last=$i 23.247 +done 23.248 +mv -f /boot.log /var/log/boot.log 23.249 +script -aqc '/etc/init.d/rcS logged' /var/log/boot.log 23.250 +;; 23.251 + 23.252 +esac
24.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 24.2 +++ b/base-tiny/stuff/etc/inittab Fri Oct 02 21:45:05 2015 +0200 24.3 @@ -0,0 +1,16 @@ 24.4 +# /etc/inittab: init configuration for SliTaz GNU/Linux. 24.5 +# Boot-time system configuration/initialization script. 24.6 +# 24.7 +::sysinit:/etc/init.d/rcS 24.8 + 24.9 +# /sbin/getty respawn shell invocations for selected ttys. 24.10 +tty1::askfirst:/sbin/getty 38400 tty1 24.11 +tty2::askfirst:/sbin/getty 38400 tty2 24.12 + 24.13 +# Stuff to do when restarting the init 24.14 +# process, or before rebooting. 24.15 +::restart:/etc/init.d/rc.shutdown 24.16 +::restart:/init 24.17 +::ctrlaltdel:/sbin/reboot 24.18 +::shutdown:/etc/init.d/rc.shutdown 24.19 +
25.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 25.2 +++ b/base-tiny/stuff/etc/issue Fri Oct 02 21:45:05 2015 +0200 25.3 @@ -0,0 +1,2 @@ 25.4 +SliTaz GNU/Linux Kernel \r \l 25.5 +
26.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 26.2 +++ b/base-tiny/stuff/etc/motd Fri Oct 02 21:45:05 2015 +0200 26.3 @@ -0,0 +1,6 @@ 26.4 + 26.5 + Welcome to the Open Source World! 26.6 + 26.7 + SliTaz GNU/Linux is distributed in the hope that it will be useful, 26.8 + but with ABSOLUTELY NO WARRANTY. 26.9 +
27.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 27.2 +++ b/base-tiny/stuff/etc/mtab Fri Oct 02 21:45:05 2015 +0200 27.3 @@ -0,0 +1,1 @@ 27.4 +/proc/mounts 27.5 \ No newline at end of file
28.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 28.2 +++ b/base-tiny/stuff/etc/network.conf Fri Oct 02 21:45:05 2015 +0200 28.3 @@ -0,0 +1,24 @@ 28.4 +# /etc/network.conf: SliTaz system wide networking configuration. 28.5 +# Config file used by: /etc/init.d/network.sh 28.6 +# 28.7 + 28.8 +# Set default interface. 28.9 +INTERFACE="eth0" 28.10 + 28.11 +# Dynamic IP address. 28.12 +# Enable/disable DHCP client at boot time. 28.13 +DHCP="no" 28.14 + 28.15 +# Static IP address. 28.16 +# Enable/disable static IP at boot time. 28.17 +STATIC="no" 28.18 + 28.19 +# Set IP address and netmask for a static IP. 28.20 +IP="" 28.21 +NETMASK="" 28.22 + 28.23 +# Set route gateway for a static IP. 28.24 +GATEWAY="" 28.25 + 28.26 +# Set DNS server for a static IP. 28.27 +DNS_SERVER=""
29.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 29.2 +++ b/base-tiny/stuff/etc/networks Fri Oct 02 21:45:05 2015 +0200 29.3 @@ -0,0 +1,1 @@ 29.4 +localnet 127.0.0.1
30.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 30.2 +++ b/base-tiny/stuff/etc/passwd Fri Oct 02 21:45:05 2015 +0200 30.3 @@ -0,0 +1,3 @@ 30.4 +root:x:0:0:Root Administrator:/root:/bin/sh 30.5 +nobody:x:99:99:Unprivileged User:/dev/null:/bin/false 30.6 +www:x:80:80:Web Server User:/var/www:/bin/false
31.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 31.2 +++ b/base-tiny/stuff/etc/profile Fri Oct 02 21:45:05 2015 +0200 31.3 @@ -0,0 +1,36 @@ 31.4 +# /etc/profile: System-wide .profile file for the Bourne shells 31.5 + 31.6 +PATH="/usr/sbin:/usr/bin:/sbin:/bin" 31.7 +LD_LIBRARY_PATH="/usr/lib:/lib" 31.8 + 31.9 +# Prompt format for Ash 31.10 +# Light green and blue colored prompt. 31.11 +PS1='\u@\h:\w\$ ' 31.12 + 31.13 +# Max 64M for programs (prevent memory leak crashes) 31.14 +ulimit -d 65536 31.15 +ulimit -m 65536 31.16 + 31.17 +# Screen display for X and encoding for GTK+ apps. 31.18 +[ -n "$DISPLAY" ] || DISPLAY=:0.0 31.19 +G_FILENAME_ENCODING=UTF-8 31.20 + 31.21 +# Export all variables defined above and set mask. 31.22 +# 31.23 +export PATH LD_LIBRARY_PATH PS1 DISPLAY G_FILENAME_ENCODING 31.24 +umask 022 31.25 + 31.26 +# Locale and timezone settings. 31.27 +# 31.28 +if [ -s "/etc/locale.conf" ]; then 31.29 + . /etc/locale.conf 31.30 + export LANG LC_ALL 31.31 +fi 31.32 +if [ -s "/etc/TZ" ]; then 31.33 + TZ=`cat /etc/TZ` 31.34 + export TZ 31.35 +fi 31.36 +ip=$(ifconfig eth0 2> /dev/null | awk '/inet addr/ { print substr($2,6) }') 31.37 +case "$TERM" in 31.38 +xterm*|rxvt*) echo -ne "\033]0;$(hostname) $(cat /etc/slitaz-release) $ip\007";; 31.39 +esac
32.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 32.2 +++ b/base-tiny/stuff/etc/rcS.conf Fri Oct 02 21:45:05 2015 +0200 32.3 @@ -0,0 +1,32 @@ 32.4 +# /etc/rcS.conf - Initial boot script configuration for SliTaz GNU/Linux. 32.5 +# Config file used by /etc/init.d/rcS 32.6 +# 32.7 + 32.8 +# Clean up the system removing all tmp and pid files. 32.9 +CLEAN_UP_SYSTEM="yes" 32.10 + 32.11 +# Filesystems to check integrity of at boot time. You should check the 32.12 +# rootfs (where SliTaz is installed) and all partitions listed in 32.13 +# /etc/fstab. Example: CHECK_FS="/dev/hda5 /dev/hdb1" 32.14 +CHECK_FS="" 32.15 + 32.16 +# Start Kernel log daemons (syslogd and klogd). 32.17 +KERNEL_LOG_DAEMONS="yes" 32.18 +SYSLOGD_ROTATED_SIZE="60" 32.19 + 32.20 +# Kernel modules to automatically load at boot time 32.21 +LOAD_MODULES="" 32.22 +KEEP_MODULES="" 32.23 + 32.24 +# Initialization scripts to run at boot time. Boot order is important. 32.25 +# Note that the local.sh script exists to let you quickly add 32.26 +# some local startup commands. 32.27 +RUN_SCRIPTS="network.sh local.sh" 32.28 +EARLY_RUN_SCRIPTS="" 32.29 + 32.30 +# Daemons to start at boot time. 32.31 +# Boot order is not really important. 32.32 +RUN_DAEMONS="" 32.33 + 32.34 +# Pre login bold message. 32.35 +MESSAGE="Welcome to your box."
33.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 33.2 +++ b/base-tiny/stuff/etc/securetty Fri Oct 02 21:45:05 2015 +0200 33.3 @@ -0,0 +1,11 @@ 33.4 +# /etc/securetty: List of terminals on which root is allowed to login. 33.5 +# 33.6 +console 33.7 + 33.8 +# For people with serial port consoles 33.9 +ttyS0 33.10 + 33.11 +# Standard consoles 33.12 +tty1 33.13 +tty2 33.14 +tty3
34.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 34.2 +++ b/base-tiny/stuff/etc/services Fri Oct 02 21:45:05 2015 +0200 34.3 @@ -0,0 +1,317 @@ 34.4 +# /etc/services: 34.5 +# $Id: services,v 1.4 2000/01/23 21:03:36 notting Exp $ 34.6 +# 34.7 +# Network services, Internet style 34.8 +# 34.9 +# Note that it is presently the policy of IANA to assign a single well-known 34.10 +# port number for both TCP and UDP; hence, most entries here have two entries 34.11 +# even if the protocol doesn't support UDP operations. 34.12 +# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports 34.13 +# are included, only the more common ones. 34.14 + 34.15 +tcpmux 1/tcp # TCP port service multiplexer 34.16 +echo 7/tcp 34.17 +echo 7/udp 34.18 +discard 9/tcp sink null 34.19 +discard 9/udp sink null 34.20 +systat 11/tcp users 34.21 +daytime 13/tcp 34.22 +daytime 13/udp 34.23 +netstat 15/tcp 34.24 +qotd 17/tcp quote 34.25 +msp 18/tcp # message send protocol 34.26 +msp 18/udp # message send protocol 34.27 +chargen 19/tcp ttytst source 34.28 +chargen 19/udp ttytst source 34.29 +ftp-data 20/tcp 34.30 +ftp 21/tcp 34.31 +fsp 21/udp fspd 34.32 +ssh 22/tcp # SSH Remote Login Protocol 34.33 +ssh 22/udp # SSH Remote Login Protocol 34.34 +telnet 23/tcp 34.35 +# 24 - private 34.36 +smtp 25/tcp mail 34.37 +# 26 - unassigned 34.38 +time 37/tcp timserver 34.39 +time 37/udp timserver 34.40 +rlp 39/udp resource # resource location 34.41 +nameserver 42/tcp name # IEN 116 34.42 +whois 43/tcp nicname 34.43 +re-mail-ck 50/tcp # Remote Mail Checking Protocol 34.44 +re-mail-ck 50/udp # Remote Mail Checking Protocol 34.45 +domain 53/tcp nameserver # name-domain server 34.46 +domain 53/udp nameserver 34.47 +mtp 57/tcp # deprecated 34.48 +bootps 67/tcp # BOOTP server 34.49 +bootps 67/udp 34.50 +bootpc 68/tcp # BOOTP client 34.51 +bootpc 68/udp 34.52 +tftp 69/udp 34.53 +gopher 70/tcp # Internet Gopher 34.54 +gopher 70/udp 34.55 +rje 77/tcp netrjs 34.56 +finger 79/tcp 34.57 +www 80/tcp http # WorldWideWeb HTTP 34.58 +www 80/udp # HyperText Transfer Protocol 34.59 +link 87/tcp ttylink 34.60 +kerberos 88/tcp kerberos5 krb5 # Kerberos v5 34.61 +kerberos 88/udp kerberos5 krb5 # Kerberos v5 34.62 +supdup 95/tcp 34.63 +# 100 - reserved 34.64 +hostnames 101/tcp hostname # usually from sri-nic 34.65 +iso-tsap 102/tcp tsap # part of ISODE. 34.66 +csnet-ns 105/tcp cso-ns # also used by CSO name server 34.67 +csnet-ns 105/udp cso-ns 34.68 +# unfortunately the poppassd (Eudora) uses a port which has already 34.69 +# been assigned to a different service. We list the poppassd as an 34.70 +# alias here. This should work for programs asking for this service. 34.71 +# (due to a bug in inetd the 3com-tsmux line is disabled) 34.72 +#3com-tsmux 106/tcp poppassd 34.73 +#3com-tsmux 106/udp poppassd 34.74 +rtelnet 107/tcp # Remote Telnet 34.75 +rtelnet 107/udp 34.76 +pop2 109/tcp pop-2 postoffice # POP version 2 34.77 +pop2 109/udp pop-2 34.78 +pop3 110/tcp pop-3 # POP version 3 34.79 +pop3 110/udp pop-3 34.80 +sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP 34.81 +sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP 34.82 +auth 113/tcp authentication tap ident 34.83 +sftp 115/tcp 34.84 +uucp-path 117/tcp 34.85 +nntp 119/tcp readnews untp # USENET News Transfer Protocol 34.86 +ntp 123/tcp 34.87 +ntp 123/udp # Network Time Protocol 34.88 +netbios-ns 137/tcp # NETBIOS Name Service 34.89 +netbios-ns 137/udp 34.90 +netbios-dgm 138/tcp # NETBIOS Datagram Service 34.91 +netbios-dgm 138/udp 34.92 +netbios-ssn 139/tcp # NETBIOS session service 34.93 +netbios-ssn 139/udp 34.94 +imap2 143/tcp imap # Interim Mail Access Proto v2 34.95 +imap2 143/udp imap 34.96 +snmp 161/udp # Simple Net Mgmt Proto 34.97 +snmp-trap 162/udp snmptrap # Traps for SNMP 34.98 +cmip-man 163/tcp # ISO mgmt over IP (CMOT) 34.99 +cmip-man 163/udp 34.100 +cmip-agent 164/tcp 34.101 +cmip-agent 164/udp 34.102 +xdmcp 177/tcp # X Display Mgr. Control Proto 34.103 +xdmcp 177/udp 34.104 +nextstep 178/tcp NeXTStep NextStep # NeXTStep window 34.105 +nextstep 178/udp NeXTStep NextStep # server 34.106 +bgp 179/tcp # Border Gateway Proto. 34.107 +bgp 179/udp 34.108 +prospero 191/tcp # Cliff Neuman's Prospero 34.109 +prospero 191/udp 34.110 +irc 194/tcp # Internet Relay Chat 34.111 +irc 194/udp 34.112 +smux 199/tcp # SNMP Unix Multiplexer 34.113 +smux 199/udp 34.114 +at-rtmp 201/tcp # AppleTalk routing 34.115 +at-rtmp 201/udp 34.116 +at-nbp 202/tcp # AppleTalk name binding 34.117 +at-nbp 202/udp 34.118 +at-echo 204/tcp # AppleTalk echo 34.119 +at-echo 204/udp 34.120 +at-zis 206/tcp # AppleTalk zone information 34.121 +at-zis 206/udp 34.122 +qmtp 209/tcp # The Quick Mail Transfer Protocol 34.123 +qmtp 209/udp # The Quick Mail Transfer Protocol 34.124 +z3950 210/tcp wais # NISO Z39.50 database 34.125 +z3950 210/udp wais 34.126 +ipx 213/tcp # IPX 34.127 +ipx 213/udp 34.128 +imap3 220/tcp # Interactive Mail Access 34.129 +imap3 220/udp # Protocol v3 34.130 +rpc2portmap 369/tcp 34.131 +rpc2portmap 369/udp # Coda portmapper 34.132 +codaauth2 370/tcp 34.133 +codaauth2 370/udp # Coda authentication server 34.134 +ulistserv 372/tcp # UNIX Listserv 34.135 +ulistserv 372/udp 34.136 +ldap 389/tcp # Lightweight Directory Access Protocol 34.137 +ldap 389/udp # Lightweight Directory Access Protocol 34.138 +https 443/tcp # MCom 34.139 +https 443/udp # MCom 34.140 +snpp 444/tcp # Simple Network Paging Protocol 34.141 +snpp 444/udp # Simple Network Paging Protocol 34.142 +saft 487/tcp # Simple Asynchronous File Transfer 34.143 +saft 487/udp # Simple Asynchronous File Transfer 34.144 +npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS 34.145 +npmp-local 610/udp dqs313_qmaster # npmp-local / DQS 34.146 +npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS 34.147 +npmp-gui 611/udp dqs313_execd # npmp-gui / DQS 34.148 +hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS 34.149 +hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS 34.150 +# 34.151 +# UNIX specific services 34.152 +# 34.153 +exec 512/tcp 34.154 +biff 512/udp comsat 34.155 +login 513/tcp 34.156 +who 513/udp whod 34.157 +shell 514/tcp cmd # no passwords used 34.158 +syslog 514/udp 34.159 +printer 515/tcp spooler # line printer spooler 34.160 +talk 517/udp 34.161 +ntalk 518/udp 34.162 +route 520/udp router routed # RIP 34.163 +timed 525/udp timeserver 34.164 +tempo 526/tcp newdate 34.165 +courier 530/tcp rpc 34.166 +conference 531/tcp chat 34.167 +netnews 532/tcp readnews 34.168 +netwall 533/udp # -for emergency broadcasts 34.169 +uucp 540/tcp uucpd # uucp daemon 34.170 +afpovertcp 548/tcp # AFP over TCP 34.171 +afpovertcp 548/udp # AFP over TCP 34.172 +remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem 34.173 +klogin 543/tcp # Kerberized `rlogin' (v5) 34.174 +kshell 544/tcp krcmd # Kerberized `rsh' (v5) 34.175 +kerberos-adm 749/tcp # Kerberos `kadmin' (v5) 34.176 +# 34.177 +webster 765/tcp # Network dictionary 34.178 +webster 765/udp 34.179 +swat 901/tcp # Samba Web Administration Tool 34.180 +# 34.181 +# From ``Assigned Numbers'': 34.182 +# 34.183 +#> The Registered Ports are not controlled by the IANA and on most systems 34.184 +#> can be used by ordinary user processes or programs executed by ordinary 34.185 +#> users. 34.186 +# 34.187 +#> Ports are used in the TCP [45,106] to name the ends of logical 34.188 +#> connections which carry long term conversations. For the purpose of 34.189 +#> providing services to unknown callers, a service contact port is 34.190 +#> defined. This list specifies the port used by the server process as its 34.191 +#> contact port. While the IANA can not control uses of these ports it 34.192 +#> does register or list uses of these ports as a convienence to the 34.193 +#> community. 34.194 +# 34.195 +ingreslock 1524/tcp 34.196 +ingreslock 1524/udp 34.197 +prospero-np 1525/tcp # Prospero non-privileged 34.198 +prospero-np 1525/udp 34.199 +datametrics 1645/tcp old-radius # datametrics / old radius entry 34.200 +datametrics 1645/udp old-radius # datametrics / old radius entry 34.201 +sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry 34.202 +sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry 34.203 +radius 1812/tcp # Radius 34.204 +radius 1812/udp # Radius 34.205 +radacct 1813/tcp # Radius Accounting 34.206 +radacct 1813/udp # Radius Accounting 34.207 +cvspserver 2401/tcp # CVS client/server operations 34.208 +cvspserver 2401/udp # CVS client/server operations 34.209 +venus 2430/tcp # codacon port 34.210 +venus 2430/udp # Venus callback/wbc interface 34.211 +venus-se 2431/tcp # tcp side effects 34.212 +venus-se 2431/udp # udp sftp side effect 34.213 +codasrv 2432/tcp # not used 34.214 +codasrv 2432/udp # server port 34.215 +codasrv-se 2433/tcp # tcp side effects 34.216 +codasrv-se 2433/udp # udp sftp side effect 34.217 +mysql 3306/tcp # MySQL 34.218 +mysql 3306/udp # MySQL 34.219 +rfe 5002/tcp # Radio Free Ethernet 34.220 +rfe 5002/udp # Actually uses UDP only 34.221 +cfengine 5308/tcp # CFengine 34.222 +cfengine 5308/udp # CFengine 34.223 +bbs 7000/tcp # BBS service 34.224 +# 34.225 +# 34.226 +# Kerberos (Project Athena/MIT) services 34.227 +# Note that these are for Kerberos v4, and are unofficial. Sites running 34.228 +# v4 should uncomment these and comment out the v5 entries above. 34.229 +# 34.230 +kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp 34.231 +kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp 34.232 +kerberos_master 751/udp # Kerberos authentication 34.233 +kerberos_master 751/tcp # Kerberos authentication 34.234 +passwd_server 752/udp # Kerberos passwd server 34.235 +krb_prop 754/tcp # Kerberos slave propagation 34.236 +krbupdate 760/tcp kreg # Kerberos registration 34.237 +kpasswd 761/tcp kpwd # Kerberos "passwd" 34.238 +kpop 1109/tcp # Pop with Kerberos 34.239 +knetd 2053/tcp # Kerberos de-multiplexor 34.240 +zephyr-srv 2102/udp # Zephyr server 34.241 +zephyr-clt 2103/udp # Zephyr serv-hm connection 34.242 +zephyr-hm 2104/udp # Zephyr hostmanager 34.243 +eklogin 2105/tcp # Kerberos encrypted rlogin 34.244 +# 34.245 +# Unofficial but necessary (for NetBSD) services 34.246 +# 34.247 +supfilesrv 871/tcp # SUP server 34.248 +supfiledbg 1127/tcp # SUP debugging 34.249 +# 34.250 +# Datagram Delivery Protocol services 34.251 +# 34.252 +rtmp 1/ddp # Routing Table Maintenance Protocol 34.253 +nbp 2/ddp # Name Binding Protocol 34.254 +echo 4/ddp # AppleTalk Echo Protocol 34.255 +zip 6/ddp # Zone Information Protocol 34.256 +# 34.257 +# Services added for the Debian GNU/Linux distribution 34.258 +poppassd 106/tcp # Eudora 34.259 +poppassd 106/udp # Eudora 34.260 +mailq 174/tcp # Mailer transport queue for Zmailer 34.261 +mailq 174/udp # Mailer transport queue for Zmailer 34.262 +ssmtp 465/tcp # SMTP over SSL 34.263 +gdomap 538/tcp # GNUstep distributed objects 34.264 +gdomap 538/udp # GNUstep distributed objects 34.265 +snews 563/tcp # NNTP over SSL 34.266 +ssl-ldap 636/tcp # LDAP over SSL 34.267 +omirr 808/tcp omirrd # online mirror 34.268 +omirr 808/udp omirrd # online mirror 34.269 +rsync 873/tcp # rsync 34.270 +rsync 873/udp # rsync 34.271 +simap 993/tcp # IMAP over SSL 34.272 +spop3 995/tcp # POP-3 over SSL 34.273 +socks 1080/tcp # socks proxy server 34.274 +socks 1080/udp # socks proxy server 34.275 +rmtcfg 1236/tcp # Gracilis Packeten remote config server 34.276 +xtel 1313/tcp # french minitel 34.277 +support 1529/tcp # GNATS 34.278 +cfinger 2003/tcp # GNU Finger 34.279 +ninstall 2150/tcp # ninstall service 34.280 +ninstall 2150/udp # ninstall service 34.281 +afbackup 2988/tcp # Afbackup system 34.282 +afbackup 2988/udp # Afbackup system 34.283 +icp 3130/tcp # Internet Cache Protocol (Squid) 34.284 +icp 3130/udp # Internet Cache Protocol (Squid) 34.285 +postgres 5432/tcp # POSTGRES 34.286 +postgres 5432/udp # POSTGRES 34.287 +fax 4557/tcp # FAX transmission service (old) 34.288 +hylafax 4559/tcp # HylaFAX client-server protocol (new) 34.289 +noclog 5354/tcp # noclogd with TCP (nocol) 34.290 +noclog 5354/udp # noclogd with UDP (nocol) 34.291 +hostmon 5355/tcp # hostmon uses TCP (nocol) 34.292 +hostmon 5355/udp # hostmon uses TCP (nocol) 34.293 +ircd 6667/tcp # Internet Relay Chat 34.294 +ircd 6667/udp # Internet Relay Chat 34.295 +webcache 8080/tcp # WWW caching service 34.296 +webcache 8080/udp # WWW caching service 34.297 +tproxy 8081/tcp # Transparent Proxy 34.298 +tproxy 8081/udp # Transparent Proxy 34.299 +mandelspawn 9359/udp mandelbrot # network mandelbrot 34.300 +amanda 10080/udp # amanda backup services 34.301 +kamanda 10081/tcp # amanda backup services (Kerberos) 34.302 +kamanda 10081/udp # amanda backup services (Kerberos) 34.303 +amandaidx 10082/tcp # amanda backup services 34.304 +amidxtape 10083/tcp # amanda backup services 34.305 +isdnlog 20011/tcp # isdn logging system 34.306 +isdnlog 20011/udp # isdn logging system 34.307 +vboxd 20012/tcp # voice box system 34.308 +vboxd 20012/udp # voice box system 34.309 +binkp 24554/tcp # Binkley 34.310 +binkp 24554/udp # Binkley 34.311 +asp 27374/tcp # Address Search Protocol 34.312 +asp 27374/udp # Address Search Protocol 34.313 +tfido 60177/tcp # Ifmail 34.314 +tfido 60177/udp # Ifmail 34.315 +fido 60179/tcp # Ifmail 34.316 +fido 60179/udp # Ifmail 34.317 + 34.318 +# Local services 34.319 + 34.320 +linuxconf 98/tcp
35.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 35.2 +++ b/base-tiny/stuff/etc/shadow Fri Oct 02 21:45:05 2015 +0200 35.3 @@ -0,0 +1,3 @@ 35.4 +root:$1$EbR327ag$7NFmnOi7JQc5/lG0JLiU8/:13525:0:99999:7::: 35.5 +nobody:*:13509:0:99999:7::: 35.6 +www:*:13509:0:99999:7:::
36.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 36.2 +++ b/base-tiny/stuff/etc/shells Fri Oct 02 21:45:05 2015 +0200 36.3 @@ -0,0 +1,5 @@ 36.4 +# /etc/shells: Valid login shells. 36.5 +/bin/sh 36.6 +/bin/ash 36.7 +/bin/bash 36.8 +/bin/hush
37.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 37.2 +++ b/base-tiny/stuff/etc/slitaz-release Fri Oct 02 21:45:05 2015 +0200 37.3 @@ -0,0 +1,1 @@ 37.4 +4.0-tiny
38.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 38.2 +++ b/base-tiny/stuff/tmp Fri Oct 02 21:45:05 2015 +0200 38.3 @@ -0,0 +1,1 @@ 38.4 +var/tmp 38.5 \ No newline at end of file
39.1 --- a/bootloader/receipt Thu Jul 18 13:24:21 2013 +0000 39.2 +++ b/bootloader/receipt Fri Oct 02 21:45:05 2015 +0200 39.3 @@ -12,5 +12,5 @@ 39.4 # Rules to gen a SliTaz package suitable for Tazpkg. 39.5 genpkg_rules() 39.6 { 39.7 - cp -a stuff/. $fs 39.8 + cp -a $stuff/. $fs 39.9 }
40.1 --- a/busybox/receipt Thu Jul 18 13:24:21 2013 +0000 40.2 +++ b/busybox/receipt Fri Oct 02 21:45:05 2015 +0200 40.3 @@ -13,6 +13,7 @@ 40.4 WEB_SITE="http://www.busybox.net/" 40.5 WGET_URL="http://www.busybox.net/downloads/$TARBALL" 40.6 CONFIG_FILES="/etc/dnsd.conf /etc/inetd.conf /etc/udhcpd.conf /etc/resolv.conf" 40.7 +AUTO_SELECTION="never" 40.8 40.9 apply_bb_patchs() 40.10 { 40.11 @@ -20,7 +21,7 @@ 40.12 while read file; do 40.13 [ -f done.$file ] && continue 40.14 echo "Apply $file..." 40.15 - patch -p1 < ../stuff/$PACKAGE-${VERSION%.*}-$file || return 1 40.16 + patch -p1 < $stuff/$PACKAGE-${VERSION%.*}-$file || return 1 40.17 touch done.$file 40.18 done <<EOT 40.19 tar.u 40.20 @@ -31,23 +32,11 @@ 40.21 cmdline.u 40.22 conspy.u 40.23 EOT 40.24 - cp ../stuff/$PACKAGE-${VERSION%.*}.config .config 40.25 + cp $stuff/$PACKAGE-${VERSION%.*}.config .config 40.26 var="CONFIG_CROSS_COMPILER_PREFIX" 40.27 sed -i "s/.*$var.*/$var=\"uclibc-$TARGET-\"/" .config 40.28 } 40.29 40.30 -# Rules to compile & install the temporary toolchain. 40.31 -cook_tmp_toolchain() 40.32 -{ 40.33 - { apply_bb_patchs && 40.34 - make oldconfig && 40.35 - make && 40.36 - make CONFIG_PREFIX=/tools install 40.37 - } || return 1 40.38 - echo "Chmod 4755 on busybox binary..." 40.39 - chmod 4755 /tools/bin/busybox 40.40 -} 40.41 - 40.42 # Rules to configure and make the package. 40.43 compile_rules() 40.44 { 40.45 @@ -58,53 +47,7 @@ 40.46 } || return 1 40.47 echo "Chmod 4755 on busybox binary..." 40.48 chmod 4755 _install/bin/busybox 40.49 -} 40.50 - 40.51 -# Rules to gen a SliTaz package suitable for Tazpkg. 40.52 -genpkg_rules() 40.53 -{ 40.54 - cp -a $src/_install/* $fs 40.55 - rm -f $fs/bin/bbconfig $fs/usr/bin/ar 40.56 - mkdir -p $fs/etc/init.d 40.57 - # Busybox config files. 40.58 - cp stuff/busybox.conf $fs/etc 40.59 - chmod 600 $fs/etc/busybox.conf 40.60 - cp stuff/dnsd.conf $fs/etc 40.61 - cp stuff/udhcpd.conf $fs/etc 40.62 - touch $fs/etc/resolv.conf 40.63 - cp stuff/inetd.conf $fs/etc 40.64 - cp stuff/daemon $fs/etc/init.d 40.65 - for i in crond dnsd ftpd httpd inetd klogd ntpd syslogd telnetd tftpd \ 40.66 - udhcpd zcip ; do 40.67 - grep -qi config_$i=y $src/.config && 40.68 - ln -s daemon $fs/etc/init.d/$i 40.69 - done 40.70 - ln -s bin/busybox $fs/init 40.71 - rm $fs/linuxrc 40.72 - mkdir -p $fs/etc/modprobe.d 40.73 - # Udhcpc stuff. 40.74 - mkdir -p $fs/usr/share/udhcpc 40.75 - cp stuff/udhcp.script $fs/usr/share/udhcpc/default.script 40.76 - chmod +x $fs/usr/share/udhcpc/default.script 40.77 - # ZeroConf stuff. 40.78 - cp stuff/zcip.script $fs/etc 40.79 - # Httpd stuff. 40.80 - cp stuff/httpd_helper.sh $fs/usr/bin 40.81 - chmod +x $fs/usr/bin/httpd_helper.sh 40.82 - # .desktop stuff 40.83 - mkdir -p $fs/usr/share 40.84 - cp -a stuff/applications $fs/usr/share 40.85 - # prepare rootfs.cpio for kernel-* packages 40.86 - mkdir -p $src/rootfs/lib 40.87 - cp -a $fs/. $src/rootfs/. 40.88 - cd $src 40.89 - for i in slitaz-base-files slitaz-boot-scripts ; do 40.90 - tazpkg get $i 40.91 - tazpkg extract $i*.tazpkg 40.92 - cp -a $i*/fs/. rootfs/. 40.93 - grep -qs ^post_install $i*/receipt || continue 40.94 - ( . $i*/receipt ; post_install rootfs ) 40.95 - done 40.96 + mkdir -p rootfs/lib 40.97 LD_LIBRARY_PATH=/usr/share/uclibc-cross-compiler-$TARGET/lib \ 40.98 uclibc-$TARGET-ldd busybox 2> /dev/null | \ 40.99 awk '/=>/ { print $3 }' | while read file ; do 40.100 @@ -120,17 +63,60 @@ 40.101 done 40.102 done 40.103 chown 0.0 rootfs/lib/* 40.104 - sed -i 's/UDEV=.*/UDEV="no"/;s/hwconf.sh l/l/' rootfs/etc/rcS.conf 40.105 - rm -rf rootfs/tmp rootfs/var/games rootfs/var/cache \ 40.106 - rootfs/bin/bootlog rootfs/etc/modprobe.d rootfs/home \ 40.107 - rootfs/sbin/mktazdevs.sh rootfs/usr/bin/man \ 40.108 - rootfs/usr/share/applications rootfs/sys rootfs/usr/bin/ldd \ 40.109 - rootfs/etc/nsswitch.conf rootfs/etc/zcip.script \ 40.110 - rootfs/etc/udhcpd.conf rootfs/etc/inetd.conf \ 40.111 - rootfs/usr/lib rootfs/usr/games rootfs/usr/share/doc \ 40.112 - rootfs/usr/local rootfs/var/lock rootfs/var/spool rootfs/media 40.113 +} 40.114 + 40.115 +# Rules to gen a SliTaz package suitable for Tazpkg. 40.116 +genpkg_rules() 40.117 +{ 40.118 + cp -a $WOK/base-tiny/stuff/. $fs/ 40.119 + cp -a $src/_install/bin/busybox $fs/bin 40.120 + for i in /bin/sh /bin/login /bin/getty /bin/false \ 40.121 + /sbin/getty /sbin/reboot; do 40.122 + ln $fs/bin/busybox $fs$i 40.123 + done 40.124 + mkdir -p $fs/etc/init.d 40.125 + # Busybox config files. 40.126 + cp $stuff/busybox.conf $fs/etc 40.127 + chmod 600 $fs/etc/busybox.conf 40.128 + #cp $stuff/dnsd.conf $fs/etc 40.129 + #cp $stuff/udhcpd.conf $fs/etc 40.130 + touch $fs/etc/resolv.conf 40.131 + cp $stuff/inetd.conf $fs/etc 40.132 + cp $stuff/daemon $fs/etc/init.d 40.133 + for i in crond dnsd ftpd httpd inetd klogd ntpd syslogd telnetd tftpd \ 40.134 + udhcpd zcip ; do 40.135 + grep -qi config_$i=y $src/.config && 40.136 + ln -s daemon $fs/etc/init.d/$i 40.137 + done 40.138 + #rm $fs/linuxrc 40.139 + #mkdir -p $fs/etc/modprobe.d 40.140 + # Udhcpc stuff. 40.141 + mkdir -p $fs/usr/share/udhcpc 40.142 + cp $stuff/udhcp.script $fs/usr/share/udhcpc/default.script 40.143 + chmod +x $fs/usr/share/udhcpc/default.script 40.144 + # ZeroConf stuff. 40.145 + #cp $stuff/zcip.script $fs/etc 40.146 + # Httpd stuff. 40.147 + #cp $stuff/httpd_helper.sh $fs/usr/bin 40.148 + #chmod +x $fs/usr/bin/httpd_helper.sh 40.149 + # .desktop stuff 40.150 + mkdir -p $fs/usr/share 40.151 + #cp -a $stuff/applications $fs/usr/share 40.152 + # prepare rootfs.cpio for kernel-* packages 40.153 + mkdir -p $src/rootfs/lib 40.154 + cp -a $fs/. $src/rootfs/. 40.155 + cd $src 40.156 + false && 40.157 + for i in slitaz-base-files slitaz-boot-scripts ; do 40.158 + tazpkg get $i 40.159 + tazpkg extract $i*.tazpkg 40.160 + cp -a $i*/fs/. rootfs/. 40.161 + grep -qs ^post_install $i*/receipt || continue 40.162 + ( . $i*/receipt ; post_install rootfs ) 40.163 + done 40.164 40.165 - ln -s var/tmp rootfs/tmp 40.166 + ln rootfs/bin/busybox rootfs/init 40.167 + #ln -s var/tmp rootfs/tmp 40.168 40.169 ( cd rootfs ; find | cpio -o -H newc ) > rootfs.cpio 40.170 du -h rootfs.cpio
41.1 --- a/busybox/stuff/applications/pcan.desktop Thu Jul 18 13:24:21 2013 +0000 41.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 41.3 @@ -1,8 +0,0 @@ 41.4 -[Desktop Entry] 41.5 -Encoding=UTF-8 41.6 -Name=Local ports scan 41.7 -Name[zh_CN]=本地端口扫描 41.8 -Exec=xterm -hold -e 'pscan localhost' 41.9 -Icon=other.png 41.10 -Type=Application 41.11 -Categories=Network;
42.1 --- a/busybox/stuff/applications/top.desktop Thu Jul 18 13:24:21 2013 +0000 42.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 42.3 @@ -1,10 +0,0 @@ 42.4 -[Desktop Entry] 42.5 -Encoding=UTF-8 42.6 -Name=Top Processes Viewer 42.7 -Name[zh_CN]=进程管理器 42.8 -Type=Application 42.9 -Comment=Show System Processes 42.10 -Exec=xterm -e top 42.11 -Icon=other.png 42.12 -Categories=ConsoleOnly;System;Application; 42.13 -GenericName=Process Viewer
43.1 --- a/busybox/stuff/busybox-1.18.config Thu Jul 18 13:24:21 2013 +0000 43.2 +++ b/busybox/stuff/busybox-1.18.config Fri Oct 02 21:45:05 2015 +0200 43.3 @@ -46,8 +46,8 @@ 43.4 # CONFIG_FEATURE_SUID_CONFIG is not set 43.5 # CONFIG_FEATURE_SUID_CONFIG_QUIET is not set 43.6 # CONFIG_SELINUX is not set 43.7 -# CONFIG_FEATURE_PREFER_APPLETS is not set 43.8 -CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" 43.9 +CONFIG_FEATURE_PREFER_APPLETS=y 43.10 +CONFIG_BUSYBOX_EXEC_PATH="/bin/busybox" 43.11 CONFIG_FEATURE_SYSLOG=y 43.12 # CONFIG_FEATURE_HAVE_RPC is not set 43.13 43.14 @@ -77,8 +77,8 @@ 43.15 # 43.16 # Installation Options ("make install" behavior) 43.17 # 43.18 -CONFIG_INSTALL_APPLET_SYMLINKS=y 43.19 -# CONFIG_INSTALL_APPLET_HARDLINKS is not set 43.20 +# CONFIG_INSTALL_APPLET_SYMLINKS is not set 43.21 +CONFIG_INSTALL_APPLET_HARDLINKS=y 43.22 # CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set 43.23 # CONFIG_INSTALL_APPLET_DONT is not set 43.24 # CONFIG_INSTALL_SH_APPLET_SYMLINK is not set 43.25 @@ -967,7 +967,7 @@ 43.26 CONFIG_SH_MATH_SUPPORT=y 43.27 # CONFIG_SH_MATH_SUPPORT_64 is not set 43.28 CONFIG_FEATURE_SH_EXTRA_QUIET=y 43.29 -# CONFIG_FEATURE_SH_STANDALONE is not set 43.30 +CONFIG_FEATURE_SH_STANDALONE=y 43.31 # CONFIG_FEATURE_SH_NOFORK is not set 43.32 43.33 #
44.1 --- a/busybox/stuff/udhcp.script Thu Jul 18 13:24:21 2013 +0000 44.2 +++ b/busybox/stuff/udhcp.script Fri Oct 02 21:45:05 2015 +0200 44.3 @@ -1,7 +1,5 @@ 44.4 #!/bin/sh 44.5 44.6 -# udhcpc script edited by Tim Riker <Tim@Rikers.org> 44.7 - 44.8 [ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1 44.9 44.10 [ "$subnet" == "255.255.255.255" ] && subnet="255.255.0.0" # qemu weirdness 44.11 @@ -14,14 +12,12 @@ 44.12 /sbin/ifconfig $interface 0.0.0.0 44.13 for i in /etc/ipdown.d/*; do 44.14 [ -x $i ] && $i $interface 44.15 - done 44.16 - ;; 44.17 + done ;; 44.18 44.19 renew|bound) 44.20 /sbin/ifconfig $interface $ip $BROADCAST $NETMASK 44.21 44.22 - if [ -n "$router" ] ; then 44.23 - echo "deleting routers" 44.24 + if [ "$router" ] ; then 44.25 while route del default gw 0.0.0.0 dev $interface ; do 44.26 : 44.27 done 44.28 @@ -32,16 +28,14 @@ 44.29 done 44.30 fi 44.31 44.32 - echo -n > $RESOLV_CONF 44.33 - [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF 44.34 + rm -f $RESOLV_CONF 44.35 + [ "$domain" ] && echo search $domain >> $RESOLV_CONF 44.36 for i in $dns ; do 44.37 - echo adding dns $i 44.38 - echo nameserver $i >> $RESOLV_CONF 44.39 - done 44.40 + echo nameserver $i 44.41 + done >> $RESOLV_CONF 44.42 [ "$1" == "bound" ] && for i in /etc/ipup.d/*; do 44.43 [ -x $i ] && $i $interface $ip $dns 44.44 - done 44.45 - ;; 44.46 + done ;; 44.47 esac 44.48 44.49 exit 0
45.1 --- a/ctorrent-dnh/receipt Thu Jul 18 13:24:21 2013 +0000 45.2 +++ b/ctorrent-dnh/receipt Fri Oct 02 21:45:05 2015 +0200 45.3 @@ -15,20 +15,18 @@ 45.4 # Rules to configure and make the package. 45.5 compile_rules() 45.6 { 45.7 - mv ${PACKAGE}$VERSION $PACKAGE-$VERSION 2>/dev/null 45.8 - cd $src 45.9 ./configure \ 45.10 --prefix=/usr \ 45.11 --with-ssl=no \ 45.12 --host=$TARGET-pc-linux-gnu \ 45.13 CC=uclibc-$TARGET-cc && 45.14 - make 45.15 - make DESTDIR=$PWD/_pkg install 45.16 + make && 45.17 + make DESTDIR=$DESTDIR install 45.18 } 45.19 45.20 # Rules to gen a SliTaz package suitable for Tazpkg. 45.21 genpkg_rules() 45.22 { 45.23 mkdir -p $fs/usr 45.24 - cp -a $_pkg/usr/bin $fs/usr 45.25 + cp -a $install/usr/bin $fs/usr 45.26 }
46.1 --- a/custom-console/receipt Thu Jul 18 13:24:21 2013 +0000 46.2 +++ b/custom-console/receipt Fri Oct 02 21:45:05 2015 +0200 46.3 @@ -2,7 +2,7 @@ 46.4 46.5 PACKAGE="custom-console" 46.6 VERSION="1.0" 46.7 -CATEGORY="configuration" 46.8 +CATEGORY="meta" 46.9 SHORT_DESC="Configure a custom console" 46.10 MAINTAINER="pascal.bellard@slitaz.org" 46.11 LICENSE="BSD"
47.1 --- a/dropbear-without-zlib/receipt Thu Jul 18 13:24:21 2013 +0000 47.2 +++ b/dropbear-without-zlib/receipt Fri Oct 02 21:45:05 2015 +0200 47.3 @@ -24,20 +24,19 @@ 47.4 local i 47.5 local DROPBEARS 47.6 DROPBEARS="dbclient scp" 47.7 - cd $src 47.8 sed -i -e 's|/usr/X11R6/bin/xauth|/usr/bin/xauth|' \ 47.9 -e 's|/usr/libexec/sftp-server|/usr/sbin/sftp-server|' \ 47.10 options.h 47.11 ./configure --prefix=/usr --without-pam --host=$TARGET-pc-linux-gnu \ 47.12 --disable-zlib CC=uclibc-$TARGET-cc && 47.13 make PROGRAMS="dropbear $DROPBEARS" MULTI=1 && 47.14 - install -d -m 755 $PWD/_pkg/usr/sbin && 47.15 - install -m 755 dropbearmulti $PWD/_pkg/usr/sbin/dropbear && 47.16 - chown root $PWD/_pkg/usr/sbin/dropbear && 47.17 - chgrp 0 $PWD/_pkg/usr/sbin/dropbear && 47.18 - install -d -m 755 $PWD/_pkg/usr/bin && 47.19 + install -d -m 755 $DESTDIR/usr/sbin && 47.20 + install -m 755 dropbearmulti $DESTDIR/usr/sbin/dropbear && 47.21 + chown root $DESTDIR/usr/sbin/dropbear && 47.22 + chgrp 0 $DESTDIR/usr/sbin/dropbear && 47.23 + install -d -m 755 $DESTDIR/usr/bin && 47.24 for i in $DROPBEARS ssh; do 47.25 - ln -s ../sbin/dropbear $PWD/_pkg/usr/bin/$i 47.26 + ln -s ../sbin/dropbear $DESTDIR/usr/bin/$i 47.27 done 47.28 } 47.29 47.30 @@ -45,8 +44,8 @@ 47.31 genpkg_rules() 47.32 { 47.33 mkdir -p $fs/usr $fs/etc/init.d $fs/etc/dropbear 47.34 - cp -a $_pkg/usr/bin $fs/usr 47.35 - cp -a $_pkg/usr/sbin $fs/usr 47.36 + cp -a $install/usr/bin $fs/usr 47.37 + cp -a $install/usr/sbin $fs/usr 47.38 ln -s daemon $fs/etc/init.d/dropbear 47.39 cat > $fs/etc/dropbear/banner <<EOT 47.40
48.1 --- a/dropbear/receipt Thu Jul 18 13:24:21 2013 +0000 48.2 +++ b/dropbear/receipt Fri Oct 02 21:45:05 2015 +0200 48.3 @@ -9,7 +9,7 @@ 48.4 TARBALL="$PACKAGE-$VERSION.tar.gz" 48.5 DEPENDS="libutil zlib" 48.6 [ -n "$TARGET" ] || TARGET="i486" 48.7 -BUILD_DEPENDS="uclibc-cross-compiler-$TARGET" 48.8 +BUILD_DEPENDS="uclibc-cross-compiler-$TARGET zlib-dev" 48.9 SUGGESTED="sftp-server" 48.10 WEB_SITE="http://matt.ucc.asn.au/dropbear/dropbear.html" 48.11 WGET_URL="http://matt.ucc.asn.au/dropbear/releases/$TARBALL" 48.12 @@ -23,20 +23,22 @@ 48.13 local i 48.14 local DROPBEARS 48.15 DROPBEARS="dbclient scp" 48.16 - cd $src 48.17 sed -i -e 's|/usr/X11R6/bin/xauth|/usr/bin/xauth|' \ 48.18 -e 's|/usr/libexec/sftp-server|/usr/sbin/sftp-server|' \ 48.19 options.h 48.20 + [ -d $WOK/zlib/taz ] || cook zlib 48.21 + ln -s $WOK/zlib/taz/*/fs/usr/lib/* /usr/share/uclibc-cross-compiler-$TARGET/lib/ 2> /dev/null 48.22 + ln -s /usr/include/z*.h /usr/share/uclibc-cross-compiler-$TARGET/include/ 2> /dev/null 48.23 ./configure --prefix=/usr --without-pam --host=$TARGET-pc-linux-gnu \ 48.24 CC=uclibc-$TARGET-cc && 48.25 make PROGRAMS="dropbear $DROPBEARS" MULTI=1 && 48.26 - install -d -m 755 $PWD/_pkg/usr/sbin && 48.27 - install -m 755 dropbearmulti $PWD/_pkg/usr/sbin/dropbear && 48.28 - chown root $PWD/_pkg/usr/sbin/dropbear && 48.29 - chgrp 0 $PWD/_pkg/usr/sbin/dropbear && 48.30 - install -d -m 755 $PWD/_pkg/usr/bin && 48.31 + install -d -m 755 $DESTDIR/usr/sbin && 48.32 + install -m 755 dropbearmulti $DESTDIR/usr/sbin/dropbear && 48.33 + chown root $DESTDIR/usr/sbin/dropbear && 48.34 + chgrp 0 $DESTDIR/usr/sbin/dropbear && 48.35 + install -d -m 755 $DESTDIR/usr/bin && 48.36 for i in $DROPBEARS ssh; do 48.37 - ln -s ../sbin/dropbear $PWD/_pkg/usr/bin/$i 48.38 + ln -s ../sbin/dropbear $DESTDIR/usr/bin/$i 48.39 done 48.40 } 48.41 48.42 @@ -44,8 +46,8 @@ 48.43 genpkg_rules() 48.44 { 48.45 mkdir -p $fs/usr $fs/etc/init.d $fs/etc/dropbear 48.46 - cp -a $_pkg/usr/bin $fs/usr 48.47 - cp -a $_pkg/usr/sbin $fs/usr 48.48 + cp -a $install/usr/bin $fs/usr 48.49 + cp -a $install/usr/sbin $fs/usr 48.50 ln -s daemon $fs/etc/init.d/dropbear 48.51 cat > $fs/etc/dropbear/banner <<EOT 48.52
49.1 --- a/fbvnc-ssh/receipt Thu Jul 18 13:24:21 2013 +0000 49.2 +++ b/fbvnc-ssh/receipt Fri Oct 02 21:45:05 2015 +0200 49.3 @@ -2,7 +2,7 @@ 49.4 49.5 PACKAGE="fbvnc-ssh" 49.6 VERSION="1.0" 49.7 -CATEGORY="network" 49.8 +CATEGORY="meta" 49.9 SHORT_DESC="VNC client in frame buffer within a SSH tunnel." 49.10 MAINTAINER="pascal.bellard@slitaz.org" 49.11 LICENSE="BSD"
50.1 --- a/fbvnc/receipt Thu Jul 18 13:24:21 2013 +0000 50.2 +++ b/fbvnc/receipt Fri Oct 02 21:45:05 2015 +0200 50.3 @@ -1,28 +1,22 @@ 50.4 # SliTaz package receipt. 50.5 50.6 PACKAGE="fbvnc" 50.7 -VERSION="20110416" 50.8 +VERSION="20130314" 50.9 CATEGORY="network" 50.10 SHORT_DESC="VNC client in frame buffer." 50.11 MAINTAINER="pascal.bellard@slitaz.org" 50.12 LICENSE="GPL2" 50.13 WEB_SITE="http://repo.or.cz/w/fbvnc.git" 50.14 -TARBALL="$PACKAGE-$VERSION.tar.gz" 50.15 +TARBALL="$PACKAGE-$VERSION.tar.bz2" 50.16 +WGET_URL="git|git://repo.or.cz/fbvnc.git" 50.17 [ -n "$TARGET" ] || TARGET="i486" 50.18 -BUILD_DEPENDS="uclibc-cross-compiler-$TARGET" 50.19 +BUILD_DEPENDS="uclibc-cross-compiler-$TARGET git bzip2" 50.20 DEPENDS="base-tiny" 50.21 50.22 # Rules to configure and make the package. 50.23 compile_rules() 50.24 { 50.25 - [ -s $SOURCES_REPOSITORY/$TARBALL ] || 50.26 - wget -O $SOURCES_REPOSITORY/$TARBALL \ 50.27 - $WEB_SITE/snapshot/e42bc02b14b3331e7c7f45c6b42179d0af99ed7b.tar.gz 50.28 - tar xzf $SOURCES_REPOSITORY/$TARBALL 50.29 - mv $PACKAGE $src 50.30 - cd $src 50.31 sed -i "s/^CC.*/CC = uclibc-$TARGET-gcc/;s/^LDFLAGS.*/& -s/" Makefile 50.32 - patch -p0 < ../stuff/fbvnc.u && 50.33 make 50.34 } 50.35
51.1 --- a/fbvnc/stuff/fbvnc.u Thu Jul 18 13:24:21 2013 +0000 51.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 51.3 @@ -1,612 +0,0 @@ 51.4 ---- draw.h 51.5 -+++ draw.h 51.6 -@@ -15,5 +15,11 @@ 51.7 - void fb_cmap(void); 51.8 - 51.9 - /* helper functions */ 51.10 -+struct rgb_conv { 51.11 -+ int rshl, gshl; 51.12 -+ int rskp, gskp, bskp; 51.13 -+ int rmax, gmax, bmax; 51.14 -+}; 51.15 -+void fill_rgb_conv(int mode, struct rgb_conv *s); 51.16 - void fb_set(int r, int c, void *mem, int len); 51.17 - unsigned fb_val(int r, int g, int b); 51.18 ---- draw.c 51.19 -+++ draw.c 51.20 -@@ -10,14 +10,13 @@ 51.21 - 51.22 - #define MIN(a, b) ((a) < (b) ? (a) : (b)) 51.23 - #define MAX(a, b) ((a) > (b) ? (a) : (b)) 51.24 --#define NLEVELS (1 << 8) 51.25 -+#define NLEVELS (1 << 16) 51.26 - 51.27 - static int fd; 51.28 - static void *fb; 51.29 - static struct fb_var_screeninfo vinfo; 51.30 - static struct fb_fix_screeninfo finfo; 51.31 --static int bpp; 51.32 --static int nr, ng, nb; 51.33 -+static int bytes_per_pixel; 51.34 - 51.35 - static int fb_len(void) 51.36 - { 51.37 -@@ -28,10 +27,12 @@ 51.38 - { 51.39 - static unsigned short red[NLEVELS], green[NLEVELS], blue[NLEVELS]; 51.40 - struct fb_cmap cmap; 51.41 -+ 51.42 - if (finfo.visual == FB_VISUAL_TRUECOLOR) 51.43 - return; 51.44 -+ 51.45 - cmap.start = 0; 51.46 -- cmap.len = MAX(nr, MAX(ng, nb)); 51.47 -+ cmap.len = NLEVELS; 51.48 - cmap.red = red; 51.49 - cmap.green = green; 51.50 - cmap.blue = blue; 51.51 -@@ -41,24 +42,39 @@ 51.52 - 51.53 - void fb_cmap(void) 51.54 - { 51.55 -- unsigned short red[NLEVELS], green[NLEVELS], blue[NLEVELS]; 51.56 -+ struct fb_bitfield *color[3] = { 51.57 -+ &vinfo.blue, &vinfo.green, &vinfo.red 51.58 -+ }; 51.59 -+ int eye_sensibility[3] = { 2, 0, 1 }; // higher=red, blue, lower=green 51.60 - struct fb_cmap cmap; 51.61 -- int i; 51.62 -+ unsigned short map[3][NLEVELS]; 51.63 -+ int i, j, n, offset; 51.64 -+ 51.65 - if (finfo.visual == FB_VISUAL_TRUECOLOR) 51.66 - return; 51.67 - 51.68 -- for (i = 0; i < nr; i++) 51.69 -- red[i] = (65535 / (nr - 1)) * i; 51.70 -- for (i = 0; i < ng; i++) 51.71 -- green[i] = (65535 / (ng - 1)) * i; 51.72 -- for (i = 0; i < nb; i++) 51.73 -- blue[i] = (65535 / (nb - 1)) * i; 51.74 -- 51.75 -+ for (i = 0, n = vinfo.bits_per_pixel; i < 3; i++) { 51.76 -+ n -= color[eye_sensibility[i]]->length = n / (3 - i); 51.77 -+ } 51.78 -+ n = (1 << vinfo.bits_per_pixel); 51.79 -+ if (n > NLEVELS) 51.80 -+ n = NLEVELS; 51.81 -+ for (i = offset = 0; i < 3; i++) { 51.82 -+ int length = color[i]->length; 51.83 -+ color[i]->offset = offset; 51.84 -+ for (j = 0; j < n; j++) { 51.85 -+ int k = (j >> offset) << (16 - length); 51.86 -+ if (k == (0xFFFF << (16 - length))) 51.87 -+ k = 0xFFFF; 51.88 -+ map[i][j] = k; 51.89 -+ } 51.90 -+ offset += length; 51.91 -+ } 51.92 - cmap.start = 0; 51.93 -- cmap.len = MAX(nr, MAX(ng, nb)); 51.94 -- cmap.red = red; 51.95 -- cmap.green = green; 51.96 -- cmap.blue = blue; 51.97 -+ cmap.len = n; 51.98 -+ cmap.red = map[2]; 51.99 -+ cmap.green = map[1]; 51.100 -+ cmap.blue = map[0]; 51.101 - cmap.transp = NULL; 51.102 - 51.103 - ioctl(fd, FBIOPUTCMAP, &cmap); 51.104 -@@ -66,25 +82,26 @@ 51.105 - 51.106 - unsigned fb_mode(void) 51.107 - { 51.108 -- return (bpp << 16) | (vinfo.red.length << 8) | 51.109 -+ return (bytes_per_pixel << 16) | (vinfo.red.length << 8) | 51.110 - (vinfo.green.length << 4) | (vinfo.blue.length); 51.111 - } 51.112 - 51.113 - int fb_init(void) 51.114 - { 51.115 -+ int err = 1; 51.116 - fd = open(FBDEV_PATH, O_RDWR); 51.117 - if (fd == -1) 51.118 - goto failed; 51.119 -+ err++; 51.120 - if (ioctl(fd, FBIOGET_VSCREENINFO, &vinfo) == -1) 51.121 - goto failed; 51.122 -+ err++; 51.123 - if (ioctl(fd, FBIOGET_FSCREENINFO, &finfo) == -1) 51.124 - goto failed; 51.125 - fcntl(fd, F_SETFD, fcntl(fd, F_GETFD) | FD_CLOEXEC); 51.126 -- bpp = (vinfo.bits_per_pixel + 7) >> 3; 51.127 -- nr = 1 << vinfo.red.length; 51.128 -- ng = 1 << vinfo.blue.length; 51.129 -- nb = 1 << vinfo.green.length; 51.130 -+ bytes_per_pixel = (vinfo.bits_per_pixel + 7) >> 3; 51.131 - fb = mmap(NULL, fb_len(), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); 51.132 -+ err++; 51.133 - if (fb == MAP_FAILED) 51.134 - goto failed; 51.135 - fb_cmap_save(1); 51.136 -@@ -93,7 +110,7 @@ 51.137 - failed: 51.138 - perror("fb_init()"); 51.139 - close(fd); 51.140 -- return 1; 51.141 -+ return err; 51.142 - } 51.143 - 51.144 - void fb_free(void) 51.145 -@@ -120,19 +137,30 @@ 51.146 - 51.147 - void fb_set(int r, int c, void *mem, int len) 51.148 - { 51.149 -- memcpy(fb_mem(r) + (c + vinfo.xoffset) * bpp, mem, len * bpp); 51.150 -+ memcpy(fb_mem(r) + (c + vinfo.xoffset) * bytes_per_pixel, 51.151 -+ mem, len * bytes_per_pixel); 51.152 - } 51.153 - 51.154 -+void fill_rgb_conv(int mode, struct rgb_conv *s) 51.155 -+{ 51.156 -+ int bits; 51.157 -+ 51.158 -+ bits = mode & 0xF; mode >>= 4; 51.159 -+ s->rshl = s->gshl = bits; 51.160 -+ s->bskp = 8 - bits; s->bmax = (1 << bits) -1; 51.161 -+ bits = mode & 0xF; mode >>= 4; 51.162 -+ s->rshl += bits; 51.163 -+ s->gskp = 8 - bits; s->gmax = (1 << bits) -1; 51.164 -+ bits = mode & 0xF; 51.165 -+ s->rskp = 8 - bits; s->rmax = (1 << bits) -1; 51.166 -+} 51.167 -+ 51.168 - unsigned fb_val(int r, int g, int b) 51.169 - { 51.170 -- switch (fb_mode() & 0x0fff) { 51.171 -- default: 51.172 -- fprintf(stderr, "fb_val: unknown fb_mode()\n"); 51.173 -- case 0x0888: 51.174 -- return (r << 16) | (g << 8) | b; 51.175 -- case 0x0565: 51.176 -- return ((r >> 3) << 11) | ((g >> 2) << 5) | (b >> 3); 51.177 -- case 0x0233: 51.178 -- return ((r >> 6) << 6) | ((g >> 5) << 3) | (b >> 5); 51.179 -- } 51.180 -+ static struct rgb_conv c; 51.181 -+ 51.182 -+ if (c.rshl == 0) 51.183 -+ fill_rgb_conv(fb_mode(), &c); 51.184 -+ return ((r >> c.rskp) << c.rshl) | ((g >> c.gskp) << c.gshl) 51.185 -+ | (b >> c.bskp); 51.186 - } 51.187 ---- fbvnc.c 51.188 -+++ fbvnc.c 51.189 -@@ -36,13 +36,15 @@ 51.190 - 51.191 - #define VNC_PORT "5900" 51.192 - 51.193 --#define MAXRES (1 << 21) 51.194 --#define MIN(a, b) ((a) < (b) ? (a) : (b)) 51.195 -+#define MAXRES (1 << 12) 51.196 - 51.197 - static int cols, rows; 51.198 -+static int srv_cols, srv_rows; 51.199 -+static int or, oc; 51.200 - static int mr, mc; /* mouse position */ 51.201 - 51.202 - static char buf[MAXRES]; 51.203 -+#define MAXPIX (MAXRES/sizeof(fbval_t)) 51.204 - 51.205 - static int vnc_connect(char *addr, char *port) 51.206 - { 51.207 -@@ -61,22 +63,26 @@ 51.208 - 51.209 - if (connect(fd, addrinfo->ai_addr, addrinfo->ai_addrlen) == -1) { 51.210 - close(fd); 51.211 -- freeaddrinfo(addrinfo); 51.212 -- return -1; 51.213 -+ fd = -2; 51.214 - } 51.215 - freeaddrinfo(addrinfo); 51.216 - return fd; 51.217 - } 51.218 - 51.219 -+static int bpp, vnc_mode; 51.220 -+static struct rgb_conv format; 51.221 - static int vnc_init(int fd) 51.222 - { 51.223 -- char vncver[] = "RFB 003.003\n"; 51.224 -+ static int vncfmt[] = { 0x40888, 0x20565, 0x10233, 0 }; 51.225 -+ char vncver[12]; 51.226 -+ int i; 51.227 -+ 51.228 - struct vnc_client_init clientinit; 51.229 - struct vnc_server_init serverinit; 51.230 - struct vnc_client_pixelfmt pixfmt_cmd; 51.231 - int connstat = VNC_CONN_FAILED; 51.232 - 51.233 -- write(fd, vncver, 12); 51.234 -+ write(fd, "RFB 003.003\n", 12); 51.235 - read(fd, vncver, 12); 51.236 - 51.237 - read(fd, &connstat, sizeof(connstat)); 51.238 -@@ -88,68 +94,78 @@ 51.239 - write(fd, &clientinit, sizeof(clientinit)); 51.240 - read(fd, &serverinit, sizeof(serverinit)); 51.241 - 51.242 -- if (fb_init()) 51.243 -- return -1; 51.244 -- if (FBM_BPP(fb_mode()) != sizeof(fbval_t)) { 51.245 -- fprintf(stderr, "fbvnc: fbval_t doesn't match fb depth\n"); 51.246 -- exit(1); 51.247 -- } 51.248 -- cols = MIN(ntohs(serverinit.w), fb_cols()); 51.249 -- rows = MIN(ntohs(serverinit.h), fb_rows()); 51.250 -+ i = fb_init(); 51.251 -+ if (i) 51.252 -+ return -1 - i; 51.253 -+ srv_cols = ntohs(serverinit.w); 51.254 -+ srv_rows = ntohs(serverinit.h); 51.255 -+ cols = MIN(srv_cols, fb_cols()); 51.256 -+ rows = MIN(srv_rows, fb_rows()); 51.257 - mr = rows / 2; 51.258 - mc = cols / 2; 51.259 -+ or = oc = 0; 51.260 - 51.261 - read(fd, buf, ntohl(serverinit.len)); 51.262 - pixfmt_cmd.type = VNC_CLIENT_PIXFMT; 51.263 -- pixfmt_cmd.format.bpp = 8; 51.264 -- pixfmt_cmd.format.depth = 8; 51.265 - pixfmt_cmd.format.bigendian = 0; 51.266 - pixfmt_cmd.format.truecolor = 1; 51.267 - 51.268 -- pixfmt_cmd.format.rmax = htons(3); 51.269 -- pixfmt_cmd.format.gmax = htons(7); 51.270 -- pixfmt_cmd.format.bmax = htons(7); 51.271 -- pixfmt_cmd.format.rshl = 0; 51.272 -- pixfmt_cmd.format.gshl = 2; 51.273 -- pixfmt_cmd.format.bshl = 5; 51.274 -+ if (bpp < 1) 51.275 -+ bpp = FBM_BPP(fb_mode()); 51.276 -+ if (bpp >= 3) 51.277 -+ bpp = 4; 51.278 -+ for (i = 0; bpp <= FBM_BPP(vncfmt[i]); i++) 51.279 -+ vnc_mode = vncfmt[i]; 51.280 -+ bpp = FBM_BPP(vnc_mode); 51.281 -+ pixfmt_cmd.format.bpp = 51.282 -+ pixfmt_cmd.format.depth = bpp << 3; 51.283 - 51.284 -+ fill_rgb_conv(FBM_COLORS(vnc_mode), &format); 51.285 -+ pixfmt_cmd.format.rmax = htons(format.rmax); 51.286 -+ pixfmt_cmd.format.gmax = htons(format.gmax); 51.287 -+ pixfmt_cmd.format.bmax = htons(format.bmax); 51.288 -+ pixfmt_cmd.format.rshl = format.rshl; 51.289 -+ pixfmt_cmd.format.gshl = format.gshl; 51.290 -+ pixfmt_cmd.format.bshl = 0; 51.291 - write(fd, &pixfmt_cmd, sizeof(pixfmt_cmd)); 51.292 - return fd; 51.293 - } 51.294 - 51.295 --static int vnc_free(void) 51.296 -+static void vnc_free(void) 51.297 - { 51.298 - fb_free(); 51.299 -- return 0; 51.300 - } 51.301 - 51.302 --static int vnc_refresh(int fd, int inc) 51.303 -+static void vnc_refresh(int fd, int inc) 51.304 - { 51.305 - struct vnc_client_fbup fbup_req; 51.306 - fbup_req.type = VNC_CLIENT_FBUP; 51.307 - fbup_req.inc = inc; 51.308 -- fbup_req.x = htons(0); 51.309 -- fbup_req.y = htons(0); 51.310 -- fbup_req.w = htons(cols); 51.311 -- fbup_req.h = htons(rows); 51.312 -+ fbup_req.x = htons(oc); 51.313 -+ fbup_req.y = htons(or); 51.314 -+ fbup_req.w = htons(oc + cols); 51.315 -+ fbup_req.h = htons(or + rows); 51.316 - write(fd, &fbup_req, sizeof(fbup_req)); 51.317 -- return 0; 51.318 - } 51.319 - 51.320 --static void drawfb(char *s, int x, int y, int w, int h) 51.321 -+static void drawfb(char *s, int x, int y, int w) 51.322 - { 51.323 -- fbval_t slice[1 << 14]; 51.324 -- int i, j; 51.325 -- for (i = 0; i < h; i++) { 51.326 -- for (j = 0; j < w; j++) { 51.327 -- int c = *(unsigned char *) &s[i * w + j]; 51.328 -- int r = (c & 0x3) << 6; 51.329 -- int g = ((c >> 2) & 0x7) << 5; 51.330 -- int b = ((c >> 5) & 0x7) << 5; 51.331 -- slice[j] = FB_VAL(r, g, b); 51.332 -+ int mode = fb_mode(); 51.333 -+ if (mode != vnc_mode) { 51.334 -+ fbval_t slice[MAXRES]; 51.335 -+ unsigned char *byte = (unsigned char *) slice; 51.336 -+ int j; 51.337 -+ int fb_bpp = FBM_BPP(mode); 51.338 -+ for (j = 0; j < w; j++, byte += fb_bpp, s += bpp) { 51.339 -+ fbval_t c = * (fbval_t *) s; 51.340 -+ int r = ((c >> format.rshl) & format.rmax) << format.rskp; 51.341 -+ int g = ((c >> format.gshl) & format.gmax) << format.gskp; 51.342 -+ int b = (c & format.bmax) << format.bskp; 51.343 -+ * (fbval_t *) byte = FB_VAL(r, g, b); 51.344 - } 51.345 -- fb_set(y + i, x, slice, w); 51.346 -+ s = (void *) slice; 51.347 - } 51.348 -+ fb_set(y, x, s, w); 51.349 - } 51.350 - 51.351 - static void xread(int fd, void *buf, int len) 51.352 -@@ -159,54 +175,84 @@ 51.353 - while (nr < len && (n = read(fd, buf + nr, len - nr)) > 0) 51.354 - nr += n; 51.355 - if (nr < len) { 51.356 -- printf("partial vnc read!\n"); 51.357 -- exit(1); 51.358 -+ fprintf(stderr,"partial vnc read!\n"); 51.359 -+ exit(99); 51.360 - } 51.361 - } 51.362 - 51.363 -+static void skip(int fd, int len) 51.364 -+{ 51.365 -+ int n; 51.366 -+ while (len > 0 && (n = read(fd, buf, MIN(len, sizeof(buf)))) > 0) 51.367 -+ len -= n; 51.368 -+} 51.369 -+ 51.370 - static int vnc_event(int fd) 51.371 - { 51.372 - struct vnc_rect uprect; 51.373 -- char msg[1 << 12]; 51.374 -- struct vnc_server_fbup *fbup = (void *) msg; 51.375 -- struct vnc_server_cuttext *cuttext = (void *) msg; 51.376 -- struct vnc_server_colormap *colormap = (void *) msg; 51.377 -- int j; 51.378 -- int n; 51.379 -+ union { 51.380 -+ struct vnc_server_fbup fbup; 51.381 -+ struct vnc_server_cuttext cuttext; 51.382 -+ struct vnc_server_colormap colormap; 51.383 -+ } msg; 51.384 -+ int j, n; 51.385 - 51.386 -- if (read(fd, msg, 1) != 1) 51.387 -+ if (read(fd, &msg.fbup.type, 1) != 1) 51.388 - return -1; 51.389 -- switch (msg[0]) { 51.390 -+ switch (msg.fbup.type) { 51.391 - case VNC_SERVER_FBUP: 51.392 -- xread(fd, msg + 1, sizeof(*fbup) - 1); 51.393 -- n = ntohs(fbup->n); 51.394 -+ xread(fd, &msg.fbup.pad, sizeof(msg.fbup) - 1); 51.395 -+ n = ntohs(msg.fbup.n); 51.396 - for (j = 0; j < n; j++) { 51.397 -- int x, y, w, h; 51.398 -+ int x, y, w, h, l, i; 51.399 - xread(fd, &uprect, sizeof(uprect)); 51.400 -+ if (uprect.enc != 0) { 51.401 -+ fprintf(stderr,"Encoding not RAW: %d\n", 51.402 -+ ntohl(uprect.enc)); 51.403 -+ return -1; 51.404 -+ } 51.405 - x = ntohs(uprect.x); 51.406 - y = ntohs(uprect.y); 51.407 - w = ntohs(uprect.w); 51.408 - h = ntohs(uprect.h); 51.409 -- if (x >= cols || x + w > cols) 51.410 -- return -1; 51.411 -- if (y >= rows || y + h > rows) 51.412 -- return -1; 51.413 -- xread(fd, buf, w * h); 51.414 -- drawfb(buf, x, y, w, h); 51.415 -+ x -= oc; 51.416 -+ y -= or; 51.417 -+ i = 0; 51.418 -+ l = MIN(w, cols - x); 51.419 -+ if (x < 0) { 51.420 -+ l = MIN(w + x, cols); 51.421 -+ i = MIN(w, -x); 51.422 -+ x = 0; 51.423 -+ } 51.424 -+ if (l < 0) 51.425 -+ l = 0; 51.426 -+ for (; h--; y++) { 51.427 -+ int n = l; 51.428 -+ int xj = x; 51.429 -+ skip(fd, i * bpp); 51.430 -+ while (n > 0) { 51.431 -+ int j = MIN(n, MAXPIX); 51.432 -+ xread(fd, buf, j * bpp); 51.433 -+ if (y >= 0 && y < rows) 51.434 -+ drawfb(buf, xj, y, j); 51.435 -+ xj += j; n -= j; 51.436 -+ } 51.437 -+ skip(fd, (w - l - i) * bpp); 51.438 -+ } 51.439 - } 51.440 - break; 51.441 - case VNC_SERVER_BELL: 51.442 - break; 51.443 - case VNC_SERVER_CUTTEXT: 51.444 -- xread(fd, msg + 1, sizeof(*cuttext) - 1); 51.445 -- xread(fd, buf, ntohl(cuttext->len)); 51.446 -+ xread(fd, &msg.cuttext.pad1, sizeof(msg.cuttext) - 1); 51.447 -+ skip(fd, ntohl(msg.cuttext.len)); 51.448 - break; 51.449 - case VNC_SERVER_COLORMAP: 51.450 -- xread(fd, msg + 1, sizeof(*colormap) - 1); 51.451 -- xread(fd, buf, ntohs(colormap->n) * 3 * 2); 51.452 -+ xread(fd, &msg.colormap.pad, sizeof(msg.colormap) - 1); 51.453 -+ skip(fd, ntohs(msg.colormap.n) * 3 * 2); 51.454 - break; 51.455 - default: 51.456 -- fprintf(stderr, "unknown vnc msg: %d\n", msg[0]); 51.457 -+ fprintf(stderr, "unknown vnc msg: %d\n", msg.fbup.type); 51.458 - return -1; 51.459 - } 51.460 - return 0; 51.461 -@@ -217,12 +263,31 @@ 51.462 - char ie[3]; 51.463 - struct vnc_client_ratevent me = {VNC_CLIENT_RATEVENT}; 51.464 - int mask = 0; 51.465 -+ int refresh = 2; 51.466 - if (read(ratfd, &ie, sizeof(ie)) != 3) 51.467 - return -1; 51.468 - mc += ie[1]; 51.469 - mr -= ie[2]; 51.470 -- mc = MAX(0, MIN(cols - 1, mc)); 51.471 -- mr = MAX(0, MIN(rows - 1, mr)); 51.472 -+ if (mc < oc) { 51.473 -+ if ((oc -= cols / 5) < 0) 51.474 -+ oc = 0; 51.475 -+ } 51.476 -+ else if (mc >= oc + cols && oc + cols < srv_cols) { 51.477 -+ if ((oc += cols / 5) > srv_cols - cols) 51.478 -+ oc = srv_cols - cols; 51.479 -+ } 51.480 -+ else refresh--; 51.481 -+ if (mr < or) { 51.482 -+ if ((or -= rows / 5) < 0) 51.483 -+ or = 0; 51.484 -+ } 51.485 -+ else if (mr >= or + rows && or + rows < srv_rows) { 51.486 -+ if ((or += rows / 5) > srv_rows - rows) 51.487 -+ or = srv_rows - rows; 51.488 -+ } 51.489 -+ else refresh--; 51.490 -+ mc = MAX(oc, MIN(oc + cols - 1, mc)); 51.491 -+ mr = MAX(or, MIN(or + rows - 1, mr)); 51.492 - if (ie[0] & 0x01) 51.493 - mask |= VNC_BUTTON1_MASK; 51.494 - if (ie[0] & 0x04) 51.495 -@@ -233,6 +298,8 @@ 51.496 - me.x = htons(mc); 51.497 - me.mask = mask; 51.498 - write(fd, &me, sizeof(me)); 51.499 -+ if (refresh) 51.500 -+ vnc_refresh(fd, 0); 51.501 - return 0; 51.502 - } 51.503 - 51.504 -@@ -292,12 +359,11 @@ 51.505 - k = 0xff0d; 51.506 - break; 51.507 - case 0x0c: /* ^L: redraw */ 51.508 -- if (vnc_refresh(fd, 0)) 51.509 -- return -1; 51.510 -+ vnc_refresh(fd, 0); 51.511 - default: 51.512 - k = (unsigned char) key[i]; 51.513 - } 51.514 -- if (k >= 'A' && k <= 'Z' || strchr(":\"<>?{}|+_()*&^%$#@!~", k)) 51.515 -+ if ((k >= 'A' && k <= 'Z') || strchr(":\"<>?{}|+_()*&^%$#@!~", k)) 51.516 - mod[nmod++] = 0xffe1; 51.517 - if (k >= 1 && k <= 26) { 51.518 - k = 'a' + k - 1; 51.519 -@@ -339,40 +405,42 @@ 51.520 - write(STDIN_FILENO, show, strlen(show)); 51.521 - } 51.522 - 51.523 --static void mainloop(int vnc_fd, int kbd_fd, int rat_fd) 51.524 -+static int mainloop(int vnc_fd, int kbd_fd, int rat_fd) 51.525 - { 51.526 - struct pollfd ufds[3]; 51.527 - int pending = 0; 51.528 - int err; 51.529 - ufds[0].fd = kbd_fd; 51.530 -- ufds[0].events = POLLIN; 51.531 - ufds[1].fd = vnc_fd; 51.532 -- ufds[1].events = POLLIN; 51.533 - ufds[2].fd = rat_fd; 51.534 -+ ufds[0].events = 51.535 -+ ufds[1].events = 51.536 - ufds[2].events = POLLIN; 51.537 -- if (vnc_refresh(vnc_fd, 0)) 51.538 -- return; 51.539 -+ vnc_refresh(vnc_fd, 0); 51.540 - while (1) { 51.541 - err = poll(ufds, 3, 500); 51.542 - if (err == -1 && errno != EINTR) 51.543 - break; 51.544 - if (!err) 51.545 - continue; 51.546 -+ err = -2; 51.547 - if (ufds[0].revents & POLLIN) 51.548 - if (kbd_event(vnc_fd, kbd_fd) == -1) 51.549 - break; 51.550 -+ err--; 51.551 - if (ufds[1].revents & POLLIN) { 51.552 - if (vnc_event(vnc_fd) == -1) 51.553 - break; 51.554 - pending = 0; 51.555 - } 51.556 -+ err--; 51.557 - if (ufds[2].revents & POLLIN) 51.558 - if (rat_event(vnc_fd, rat_fd) == -1) 51.559 - break; 51.560 - if (!pending++) 51.561 -- if (vnc_refresh(vnc_fd, 1)) 51.562 -- break; 51.563 -+ vnc_refresh(vnc_fd, 1); 51.564 - } 51.565 -+ return err; 51.566 - } 51.567 - 51.568 - int main(int argc, char * argv[]) 51.569 -@@ -380,27 +448,38 @@ 51.570 - char *port = VNC_PORT; 51.571 - char *host = "127.0.0.1"; 51.572 - struct termios ti; 51.573 -- int vnc_fd, rat_fd; 51.574 -+ int vnc_fd, rat_fd, status; 51.575 -+ 51.576 -+ if (argc < 2) { 51.577 -+ fprintf(stderr, "Usage : fbvnc [-bpp bits] server [port]\n"); 51.578 -+ return 0; 51.579 -+ } 51.580 -+ if (*argv[1] == '-' && argc >= 3) { 51.581 -+ argc -= 2; argv += 2; 51.582 -+ bpp = atoi(argv[0]) >> 3; 51.583 -+ } 51.584 - if (argc >= 2) 51.585 - host = argv[1]; 51.586 - if (argc >= 3) 51.587 - port = argv[2]; 51.588 -- if ((vnc_fd = vnc_connect(host, port)) == -1) { 51.589 -- fprintf(stderr, "could not connect!\n"); 51.590 -+ if ((vnc_fd = vnc_connect(host, port)) < 0) { 51.591 -+ fprintf(stderr, "could not connect! %s %s : %d\n", 51.592 -+ host,port,vnc_fd); 51.593 - return 1; 51.594 - } 51.595 -- if (vnc_init(vnc_fd) == -1) { 51.596 -- fprintf(stderr, "vnc init failed!\n"); 51.597 -- return 1; 51.598 -+ status = vnc_init(vnc_fd); 51.599 -+ if (status < 0) { 51.600 -+ fprintf(stderr, "vnc init failed! %d\n", status); 51.601 -+ return 2; 51.602 - } 51.603 - term_setup(&ti); 51.604 - rat_fd = open("/dev/input/mice", O_RDONLY); 51.605 - 51.606 -- mainloop(vnc_fd, 0, rat_fd); 51.607 -+ status = mainloop(vnc_fd, 0, rat_fd); 51.608 - 51.609 - term_cleanup(&ti); 51.610 - vnc_free(); 51.611 - close(vnc_fd); 51.612 - close(rat_fd); 51.613 -- return 0; 51.614 -+ return 2 - status; 51.615 - }
52.1 --- a/fr/receipt Thu Jul 18 13:24:21 2013 +0000 52.2 +++ b/fr/receipt Fri Oct 02 21:45:05 2015 +0200 52.3 @@ -2,7 +2,7 @@ 52.4 52.5 PACKAGE="fr" 52.6 VERSION="1.0" 52.7 -CATEGORY="configuration" 52.8 +CATEGORY="meta" 52.9 SHORT_DESC="FR keyboard and locales" 52.10 MAINTAINER="pascal.bellard@slitaz.org" 52.11 LICENSE="GPL2" 52.12 @@ -12,10 +12,9 @@ 52.13 # Rules to configure and make the package. 52.14 compile_rules() 52.15 { 52.16 - mkdir -p fs/etc 52.17 - echo "Europe/Paris" > fs/etc/TZ 52.18 - echo "fr-latin1" > fs/etc/keymap.conf 52.19 - cat > fs/etc/locale.conf <<EOT 52.20 + mkdir -p $DESTDIR/etc 52.21 + echo "Europe/Paris" > $DESTDIR/etc/TZ 52.22 + cat > $DESTDIR/etc/locale.conf <<EOT 52.23 LANG=fr_FR 52.24 LC_ALL=fr_FR 52.25 EOT 52.26 @@ -24,8 +23,8 @@ 52.27 tazpkg get $pkg 52.28 tazpkg extract $pkg*.tazpkg 52.29 fi 52.30 - mkdir -p fs$(dirname $file) 52.31 - mv $pkg*/fs$file fs$(dirname $file) || return 1 52.32 + mkdir -p $DESTDIR$(dirname $file) 52.33 + mv $pkg*/fs$file $DESTDIR$(dirname $file) || return 1 52.34 done << EOT 52.35 kbd-busybox /usr/share/kmap/fr-latin1.kmap 52.36 EOT 52.37 @@ -34,5 +33,5 @@ 52.38 # Rules to gen a SliTaz package suitable for Tazpkg. 52.39 genpkg_rules() 52.40 { 52.41 - cp -a fs/. $fs 52.42 + cp -a $install/. $fs 52.43 }
53.1 --- a/ftp-config/receipt Thu Jul 18 13:24:21 2013 +0000 53.2 +++ b/ftp-config/receipt Fri Oct 02 21:45:05 2015 +0200 53.3 @@ -2,7 +2,7 @@ 53.4 53.5 PACKAGE="ftp-config" 53.6 VERSION="1.0" 53.7 -CATEGORY="configuration" 53.8 +CATEGORY="meta" 53.9 SHORT_DESC="File transport protocol server configuration" 53.10 MAINTAINER="pascal.bellard@slitaz.org" 53.11 LICENSE="BSD"
54.1 --- a/gpxe/receipt Thu Jul 18 13:24:21 2013 +0000 54.2 +++ b/gpxe/receipt Fri Oct 02 21:45:05 2015 +0200 54.3 @@ -18,8 +18,8 @@ 54.4 tazpkg get $pkg 54.5 tazpkg extract $pkg*.tazpkg 54.6 fi 54.7 - mkdir -p fs$(dirname $file) 54.8 - mv $pkg*/fs$file fs$(dirname $file) || return 1 54.9 + mkdir -p $DESTDIR$(dirname $file) 54.10 + mv $pkg*/fs$file $DESTDIR$(dirname $file) || return 1 54.11 done << EOT 54.12 gpxe-pxe /usr/share/boot/gpxe.pxe 54.13 EOT 54.14 @@ -28,7 +28,7 @@ 54.15 # Rules to gen a SliTaz package suitable for Tazpkg. 54.16 genpkg_rules() 54.17 { 54.18 - cp -a fs/. $fs 54.19 + cp -a $install/. $fs 54.20 } 54.21 54.22 post_install()
55.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 55.2 +++ b/hardware-ibm-6272/receipt Fri Oct 02 21:45:05 2015 +0200 55.3 @@ -0,0 +1,64 @@ 55.4 +# SliTaz package receipt. 55.5 + 55.6 +PACKAGE="hardware-ibm-6272" 55.7 +VERSION="1.0" 55.8 +CATEGORY="meta" 55.9 +MAINTAINER="devel@slitaz.org" 55.10 +LICENSE="BSD" 55.11 +SHORT_DESC="IBM 300GL 6272/6282 (P75-233 ISA/PCI/USB/ETH desktop) hardware support" 55.12 +WEB_SITE="http://www.slitaz.org/" 55.13 + 55.14 +DEPENDS="isapnptools module-cs89x0" 55.15 +SUGGESTED="module-usb-storage" 55.16 + 55.17 +# Post message when installing. 55.18 +post_install() 55.19 +{ 55.20 + [ -s $1/etc/init.d/pnp.sh ] || cat > $1/etc/init.d/pnp.sh <<EOT 55.21 +#!/bin/sh 55.22 + 55.23 +. /etc/init.d/rc.functions 55.24 +EOT 55.25 + chmod +x $fs/etc/init.d/pnp.sh 55.26 + cat >> $1/etc/init.d/pnp.sh <<EOT 55.27 + 55.28 +echo -n "Switching on isa pnp ethernet card " 55.29 +for io in \$(seq 360 -10 250); do for irq in IRQ_CS89X0_LIST; do 55.30 +pnpdump | awk "BEGIN {s=0} \\ 55.31 +/CONFIGURE CSC6040/ {s=1} { \\ 55.32 + if (s==0) print; \\ 55.33 + else if (/INT 0/) print \\"(INT 0 (IRQ \$irq (MODE +E)))\\"; \\ 55.34 + else if (/IO 0/) print \\"(IO 0 (SIZE 16) (BASE 0x0\$io) (CHECK))\\"; \\ 55.35 + else if (/ACT Y/) { s=0; print \\"(ACT Y)\\"} \\ 55.36 + else print \\ 55.37 +}" > /etc/isapnp.conf 55.38 +if isapnp /etc/isapnp.conf > /dev/null 2>&1 ; then 55.39 + modprobe cs89x0 io=0x\$io irq=\$irq > /dev/null 2>&1 55.40 + break 2 55.41 +fi 55.42 +done ; done 55.43 +status 55.44 +EOT 55.45 + grep pnp.sh $1/etc/rcS.conf || 55.46 + sed -i 's/EARLY_RUN_SCRIPTS="/&pnp.sh /' $1/etc/rcS.conf 55.47 + list="" 55.48 + for i in $IRQ_CS89X0_LIST ; do 55.49 + case " 15 12 11 10 9 7 6 5 4 3 " in 55.50 + *\ $i\ *) list="$list $i " 55.51 + esac 55.52 + done 55.53 + sed -i "s/IRQ_CS89X0_LIST/${list:-15 12 11 10}/" $1/etc/init.d/pnp.sh 55.54 + sed -i 's/cs89x0[^ "]* //' $1/etc/rcS.conf 55.55 +} 55.56 + 55.57 +config_form() 55.58 +{ 55.59 + cat <<EOT 55.60 +<table> 55.61 +<tr> 55.62 +<td>Allowed IRQ for the Ethernet driver cs89x0</td> 55.63 +<td><input type="text" name="IRQ_CS89X0_LIST" value="${IRQ_LIST:-15 12 11 10 9 7 6 5 4 3}" /></td> 55.64 +</tr> 55.65 +</table> 55.66 +EOT 55.67 +}
56.1 --- a/isapnptools/receipt Thu Jul 18 13:24:21 2013 +0000 56.2 +++ b/isapnptools/receipt Fri Oct 02 21:45:05 2015 +0200 56.3 @@ -10,13 +10,11 @@ 56.4 BUILD_DEPENDS="uclibc-cross-compiler-$TARGET" 56.5 TARBALL="$PACKAGE-$VERSION.tgz" 56.6 WEB_SITE="http://www.roestock.demon.co.uk/isapnptools/" 56.7 -WGET_URL="ftp://metalab.unc.edu/pub/Linux/system/hardware/$TARBALL" 56.8 +WGET_URL="http://mirror.slitaz.org/sources/packages/i/$TARBALL" 56.9 56.10 # Rules to configure and make the package. 56.11 compile_rules() 56.12 { 56.13 - cd $src 56.14 - 56.15 # Fix cross tools prefix... 56.16 export PATH=$PWD:$PATH 56.17 PREFIX=$TARGET-uclibc-gnu 56.18 @@ -30,12 +28,12 @@ 56.19 --prefix=/usr --bindir=/bin \ 56.20 --libexecdir=/usr/bin --mandir=/usr/share/man 56.21 make && 56.22 - make DESTDIR=$PWD/_pkg install 56.23 + make DESTDIR=$DESTDIR install 56.24 } 56.25 56.26 # Rules to gen a SliTaz package suitable for Tazpkg. 56.27 genpkg_rules() 56.28 { 56.29 # move /usr/sbin/* /sbin to use pnptools *before* mounting /usr 56.30 - cp -a $_pkg/usr/sbin $fs 56.31 + cp -a $install/usr/sbin $fs 56.32 }
57.1 --- a/jslinux-config/receipt Thu Jul 18 13:24:21 2013 +0000 57.2 +++ b/jslinux-config/receipt Fri Oct 02 21:45:05 2015 +0200 57.3 @@ -2,22 +2,16 @@ 57.4 57.5 PACKAGE="jslinux-config" 57.6 VERSION="1.0" 57.7 -CATEGORY="configuration" 57.8 +CATEGORY="meta" 57.9 SHORT_DESC="Tiny SliTaz configuration files for jslinux" 57.10 MAINTAINER="pascal.bellard@slitaz.org" 57.11 LICENSE="BSD" 57.12 WEB_SITE="http://tiny.slitaz.org/" 57.13 DEPENDS="custom-console" 57.14 57.15 -# Rules to configure and make the package. 57.16 -compile_rules() 57.17 -{ 57.18 - mkdir -p fs/dev 57.19 - mkmod -m 660 fs/dev/clipboard c 10 231 57.20 -} 57.21 - 57.22 # Rules to gen a SliTaz package suitable for Tazpkg. 57.23 genpkg_rules() 57.24 { 57.25 - cp -a fs/. $fs 57.26 + mkdir -p $fs/dev 57.27 + mknod -m 660 $fs/dev/clipboard c 10 231 57.28 }
58.1 --- a/jssame/receipt Thu Jul 18 13:24:21 2013 +0000 58.2 +++ b/jssame/receipt Fri Oct 02 21:45:05 2015 +0200 58.3 @@ -11,8 +11,7 @@ 58.4 # Rules to gen a SliTaz package suitable for Tazpkg. 58.5 genpkg_rules() 58.6 { 58.7 - mkdir $fs/var/www/same 58.8 + mkdir -p $fs/var/www/same 58.9 cp -a $stuff/index.html $fs/var/www/same 58.10 chown -R 80.80 $fs/var/www/same 58.11 } 58.12 -
59.1 --- a/kernel-fb/receipt Thu Jul 18 13:24:21 2013 +0000 59.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 59.3 @@ -1,20 +0,0 @@ 59.4 -# SliTaz package receipt. 59.5 - 59.6 -PACKAGE="kernel-fb" 59.7 -VERSION="2.6.37" 59.8 -CATEGORY="base-system" 59.9 -SHORT_DESC="Kernel i386 with mouses, video frame buffers and some ethernet cards, but no disk." 59.10 -MAINTAINER="devel@slitaz.org" 59.11 -LICENSE="GPL2" 59.12 -WEB_SITE="http://www.kernel.org/" 59.13 -WANTED="kernel-modular" 59.14 - 59.15 -# Rules to gen a SliTaz package suitable for Tazpkg. 59.16 -genpkg_rules() 59.17 -{ 59.18 - mkdir $fs/boot 59.19 - cp -a $WOK/kernel-modular/linux-$VERSION/$PACKAGE $fs/boot/bzImage 59.20 - cp -a $WOK/kernel-modular/linux-$VERSION/System.map-${PACKAGE#kernel-} $fs/boot/System.map 59.21 - cp -a $WOK/kernel-modular/linux-$VERSION/config-${PACKAGE#kernel-} $fs/boot/config 59.22 - cp -a $WOK/kernel-modular/linux-$VERSION/config-busybox $fs/boot 59.23 -}
60.1 --- a/kernel-isa/receipt Thu Jul 18 13:24:21 2013 +0000 60.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 60.3 @@ -1,21 +0,0 @@ 60.4 -# SliTaz package receipt. 60.5 - 60.6 -PACKAGE="kernel-isa" 60.7 -VERSION="2.6.37" 60.8 -CATEGORY="base-system" 60.9 -SHORT_DESC="Kernel i386 with ppp, ne2k-isa, 3c509, ide and ext3" 60.10 -MAINTAINER="devel@slitaz.org" 60.11 -LICENSE="GPL2" 60.12 -WEB_SITE="http://www.kernel.org/" 60.13 -WANTED="kernel-modular" 60.14 - 60.15 -# Rules to gen a SliTaz package suitable for Tazpkg. 60.16 -genpkg_rules() 60.17 -{ 60.18 - mkdir $fs/boot 60.19 - cp -a $WOK/kernel-modular/linux-$VERSION/$PACKAGE $fs/boot/bzImage 60.20 - cp -a $WOK/kernel-modular/linux-$VERSION/System.map-${PACKAGE#kernel-} $fs/boot/System.map 60.21 - cp -a $WOK/kernel-modular/linux-$VERSION/config-${PACKAGE#kernel-} $fs/boot/config 60.22 - cp -a $WOK/kernel-modular/linux-$VERSION/config-busybox $fs/boot 60.23 -} 60.24 -
61.1 --- a/kernel-lguest/receipt Thu Jul 18 13:24:21 2013 +0000 61.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 61.3 @@ -1,20 +0,0 @@ 61.4 -# SliTaz package receipt. 61.5 - 61.6 -PACKAGE="kernel-lguest" 61.7 -VERSION="2.6.37" 61.8 -CATEGORY="base-system" 61.9 -SHORT_DESC="Kernel i686 with ext3 and virtual drivers for ethernet and disk" 61.10 -MAINTAINER="devel@slitaz.org" 61.11 -LICENSE="GPL2" 61.12 -WEB_SITE="http://www.kernel.org/" 61.13 -WANTED="kernel-modular" 61.14 - 61.15 -# Rules to gen a SliTaz package suitable for Tazpkg. 61.16 -genpkg_rules() 61.17 -{ 61.18 - mkdir $fs/boot 61.19 - cp -a $WOK/kernel-modular/linux-$VERSION/$PACKAGE $fs/boot/bzImage 61.20 - cp -a $WOK/kernel-modular/linux-$VERSION/System.map-${PACKAGE#kernel-} $fs/boot/System.map 61.21 - cp -a $WOK/kernel-modular/linux-$VERSION/config-${PACKAGE#kernel-} $fs/boot/config 61.22 - cp -a $WOK/kernel-modular/linux-$VERSION/config-busybox $fs/boot 61.23 -}
62.1 --- a/kernel-modular/stuff/001-squashfs-decompressors-add-xz-decompressor-module.patch Thu Jul 18 13:24:21 2013 +0000 62.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 62.3 @@ -1,3934 +0,0 @@ 62.4 -From: Lasse Collin <lasse.collin@tukaani.org> 62.5 -Date: Thu, 2 Dec 2010 19:14:19 +0000 (+0200) 62.6 -Subject: Decompressors: Add XZ decompressor module 62.7 -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fpkl%2Fsquashfs-xz.git;a=commitdiff_plain;h=3dbc3fe7878e53b43064a12d4ab31ca4c18ce85f 62.8 - 62.9 -Decompressors: Add XZ decompressor module 62.10 - 62.11 -In userspace, the .lzma format has become mostly a legacy 62.12 -file format that got superseded by the .xz format. Similarly, 62.13 -LZMA Utils was superseded by XZ Utils. 62.14 - 62.15 -These patches add support for XZ decompression into 62.16 -the kernel. Most of the code is as is from XZ Embedded 62.17 -<http://tukaani.org/xz/embedded.html>. It was written for 62.18 -the Linux kernel but is usable in other projects too. 62.19 - 62.20 -Advantages of XZ over the current LZMA code in the kernel: 62.21 - - Nice API that can be used by other kernel modules; it's 62.22 - not limited to kernel, initramfs, and initrd decompression. 62.23 - - Integrity check support (CRC32) 62.24 - - BCJ filters improve compression of executable code on 62.25 - certain architectures. These together with LZMA2 can 62.26 - produce a few percent smaller kernel or Squashfs images 62.27 - than plain LZMA without making the decompression slower. 62.28 - 62.29 -This patch: Add the main decompression code (xz_dec), testing 62.30 -module (xz_dec_test), wrapper script (xz_wrap.sh) for the xz 62.31 -command line tool, and documentation. The xz_dec module is 62.32 -enough to have a usable XZ decompressor e.g. for Squashfs. 62.33 - 62.34 -Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> 62.35 ---- 62.36 - 62.37 -diff --git a/Documentation/xz.txt b/Documentation/xz.txt 62.38 -new file mode 100644 62.39 -index 0000000..68329ac 62.40 ---- /dev/null 62.41 -+++ b/Documentation/xz.txt 62.42 -@@ -0,0 +1,122 @@ 62.43 -+ 62.44 -+XZ data compression in Linux 62.45 -+============================ 62.46 -+ 62.47 -+Introduction 62.48 -+ 62.49 -+ XZ is a general purpose data compression format with high compression 62.50 -+ ratio and relatively fast decompression. The primary compression 62.51 -+ algorithm (filter) is LZMA2. Additional filters can be used to improve 62.52 -+ compression ratio even further. E.g. Branch/Call/Jump (BCJ) filters 62.53 -+ improve compression ratio of executable data. 62.54 -+ 62.55 -+ The XZ decompressor in Linux is called XZ Embedded. It supports 62.56 -+ the LZMA2 filter and optionally also BCJ filters. CRC32 is supported 62.57 -+ for integrity checking. The home page of XZ Embedded is at 62.58 -+ <http://tukaani.org/xz/embedded.html>, where you can find the 62.59 -+ latest version and also information about using the code outside 62.60 -+ the Linux kernel. 62.61 -+ 62.62 -+ For userspace, XZ Utils provide a zlib-like compression library 62.63 -+ and a gzip-like command line tool. XZ Utils can be downloaded from 62.64 -+ <http://tukaani.org/xz/>. 62.65 -+ 62.66 -+XZ related components in the kernel 62.67 -+ 62.68 -+ The xz_dec module provides XZ decompressor with single-call (buffer 62.69 -+ to buffer) and multi-call (stateful) APIs. The usage of the xz_dec 62.70 -+ module is documented in include/linux/xz.h. 62.71 -+ 62.72 -+ The xz_dec_test module is for testing xz_dec. xz_dec_test is not 62.73 -+ useful unless you are hacking the XZ decompressor. xz_dec_test 62.74 -+ allocates a char device major dynamically to which one can write 62.75 -+ .xz files from userspace. The decompressed output is thrown away. 62.76 -+ Keep an eye on dmesg to see diagnostics printed by xz_dec_test. 62.77 -+ See the xz_dec_test source code for the details. 62.78 -+ 62.79 -+ For decompressing the kernel image, initramfs, and initrd, there 62.80 -+ is a wrapper function in lib/decompress_unxz.c. Its API is the 62.81 -+ same as in other decompress_*.c files, which is defined in 62.82 -+ include/linux/decompress/generic.h. 62.83 -+ 62.84 -+ scripts/xz_wrap.sh is a wrapper for the xz command line tool found 62.85 -+ from XZ Utils. The wrapper sets compression options to values suitable 62.86 -+ for compressing the kernel image. 62.87 -+ 62.88 -+ For kernel makefiles, two commands are provided for use with 62.89 -+ $(call if_needed). The kernel image should be compressed with 62.90 -+ $(call if_needed,xzkern) which will use a BCJ filter and a big LZMA2 62.91 -+ dictionary. It will also append a four-byte trailer containing the 62.92 -+ uncompressed size of the file, which is needed by the boot code. 62.93 -+ Other things should be compressed with $(call if_needed,xzmisc) 62.94 -+ which will use no BCJ filter and 1 MiB LZMA2 dictionary. 62.95 -+ 62.96 -+Notes on compression options 62.97 -+ 62.98 -+ Since the XZ Embedded supports only streams with no integrity check or 62.99 -+ CRC32, make sure that you don't use some other integrity check type 62.100 -+ when encoding files that are supposed to be decoded by the kernel. With 62.101 -+ liblzma, you need to use either LZMA_CHECK_NONE or LZMA_CHECK_CRC32 62.102 -+ when encoding. With the xz command line tool, use --check=none or 62.103 -+ --check=crc32. 62.104 -+ 62.105 -+ Using CRC32 is strongly recommended unless there is some other layer 62.106 -+ which will verify the integrity of the uncompressed data anyway. 62.107 -+ Double checking the integrity would probably be waste of CPU cycles. 62.108 -+ Note that the headers will always have a CRC32 which will be validated 62.109 -+ by the decoder; you can only change the integrity check type (or 62.110 -+ disable it) for the actual uncompressed data. 62.111 -+ 62.112 -+ In userspace, LZMA2 is typically used with dictionary sizes of several 62.113 -+ megabytes. The decoder needs to have the dictionary in RAM, thus big 62.114 -+ dictionaries cannot be used for files that are intended to be decoded 62.115 -+ by the kernel. 1 MiB is probably the maximum reasonable dictionary 62.116 -+ size for in-kernel use (maybe more is OK for initramfs). The presets 62.117 -+ in XZ Utils may not be optimal when creating files for the kernel, 62.118 -+ so don't hesitate to use custom settings. Example: 62.119 -+ 62.120 -+ xz --check=crc32 --lzma2=dict=512KiB inputfile 62.121 -+ 62.122 -+ An exception to above dictionary size limitation is when the decoder 62.123 -+ is used in single-call mode. Decompressing the kernel itself is an 62.124 -+ example of this situation. In single-call mode, the memory usage 62.125 -+ doesn't depend on the dictionary size, and it is perfectly fine to 62.126 -+ use a big dictionary: for maximum compression, the dictionary should 62.127 -+ be at least as big as the uncompressed data itself. 62.128 -+ 62.129 -+Future plans 62.130 -+ 62.131 -+ Creating a limited XZ encoder may be considered if people think it is 62.132 -+ useful. LZMA2 is slower to compress than e.g. Deflate or LZO even at 62.133 -+ the fastest settings, so it isn't clear if LZMA2 encoder is wanted 62.134 -+ into the kernel. 62.135 -+ 62.136 -+ Support for limited random-access reading is planned for the 62.137 -+ decompression code. I don't know if it could have any use in the 62.138 -+ kernel, but I know that it would be useful in some embedded projects 62.139 -+ outside the Linux kernel. 62.140 -+ 62.141 -+Conformance to the .xz file format specification 62.142 -+ 62.143 -+ There are a couple of corner cases where things have been simplified 62.144 -+ at expense of detecting errors as early as possible. These should not 62.145 -+ matter in practice all, since they don't cause security issues. But 62.146 -+ it is good to know this if testing the code e.g. with the test files 62.147 -+ from XZ Utils. 62.148 -+ 62.149 -+Reporting bugs 62.150 -+ 62.151 -+ Before reporting a bug, please check that it's not fixed already 62.152 -+ at upstream. See <http://tukaani.org/xz/embedded.html> to get the 62.153 -+ latest code. 62.154 -+ 62.155 -+ Report bugs to <lasse.collin@tukaani.org> or visit #tukaani on 62.156 -+ Freenode and talk to Larhzu. I don't actively read LKML or other 62.157 -+ kernel-related mailing lists, so if there's something I should know, 62.158 -+ you should email to me personally or use IRC. 62.159 -+ 62.160 -+ Don't bother Igor Pavlov with questions about the XZ implementation 62.161 -+ in the kernel or about XZ Utils. While these two implementations 62.162 -+ include essential code that is directly based on Igor Pavlov's code, 62.163 -+ these implementations aren't maintained nor supported by him. 62.164 -+ 62.165 -diff --git a/include/linux/xz.h b/include/linux/xz.h 62.166 -new file mode 100644 62.167 -index 0000000..64cffa6 62.168 ---- /dev/null 62.169 -+++ b/include/linux/xz.h 62.170 -@@ -0,0 +1,264 @@ 62.171 -+/* 62.172 -+ * XZ decompressor 62.173 -+ * 62.174 -+ * Authors: Lasse Collin <lasse.collin@tukaani.org> 62.175 -+ * Igor Pavlov <http://7-zip.org/> 62.176 -+ * 62.177 -+ * This file has been put into the public domain. 62.178 -+ * You can do whatever you want with this file. 62.179 -+ */ 62.180 -+ 62.181 -+#ifndef XZ_H 62.182 -+#define XZ_H 62.183 -+ 62.184 -+#ifdef __KERNEL__ 62.185 -+# include <linux/stddef.h> 62.186 -+# include <linux/types.h> 62.187 -+#else 62.188 -+# include <stddef.h> 62.189 -+# include <stdint.h> 62.190 -+#endif 62.191 -+ 62.192 -+/* In Linux, this is used to make extern functions static when needed. */ 62.193 -+#ifndef XZ_EXTERN 62.194 -+# define XZ_EXTERN extern 62.195 -+#endif 62.196 -+ 62.197 -+/** 62.198 -+ * enum xz_mode - Operation mode 62.199 -+ * 62.200 -+ * @XZ_SINGLE: Single-call mode. This uses less RAM than 62.201 -+ * than multi-call modes, because the LZMA2 62.202 -+ * dictionary doesn't need to be allocated as 62.203 -+ * part of the decoder state. All required data 62.204 -+ * structures are allocated at initialization, 62.205 -+ * so xz_dec_run() cannot return XZ_MEM_ERROR. 62.206 -+ * @XZ_PREALLOC: Multi-call mode with preallocated LZMA2 62.207 -+ * dictionary buffer. All data structures are 62.208 -+ * allocated at initialization, so xz_dec_run() 62.209 -+ * cannot return XZ_MEM_ERROR. 62.210 -+ * @XZ_DYNALLOC: Multi-call mode. The LZMA2 dictionary is 62.211 -+ * allocated once the required size has been 62.212 -+ * parsed from the stream headers. If the 62.213 -+ * allocation fails, xz_dec_run() will return 62.214 -+ * XZ_MEM_ERROR. 62.215 -+ * 62.216 -+ * It is possible to enable support only for a subset of the above 62.217 -+ * modes at compile time by defining XZ_DEC_SINGLE, XZ_DEC_PREALLOC, 62.218 -+ * or XZ_DEC_DYNALLOC. The xz_dec kernel module is always compiled 62.219 -+ * with support for all operation modes, but the preboot code may 62.220 -+ * be built with fewer features to minimize code size. 62.221 -+ */ 62.222 -+enum xz_mode { 62.223 -+ XZ_SINGLE, 62.224 -+ XZ_PREALLOC, 62.225 -+ XZ_DYNALLOC 62.226 -+}; 62.227 -+ 62.228 -+/** 62.229 -+ * enum xz_ret - Return codes 62.230 -+ * @XZ_OK: Everything is OK so far. More input or more 62.231 -+ * output space is required to continue. This 62.232 -+ * return code is possible only in multi-call mode 62.233 -+ * (XZ_PREALLOC or XZ_DYNALLOC). 62.234 -+ * @XZ_STREAM_END: Operation finished successfully. 62.235 -+ * @XZ_UNSUPPORTED_CHECK: Integrity check type is not supported. Decoding 62.236 -+ * is still possible in multi-call mode by simply 62.237 -+ * calling xz_dec_run() again. 62.238 -+ * Note that this return value is used only if 62.239 -+ * XZ_DEC_ANY_CHECK was defined at build time, 62.240 -+ * which is not used in the kernel. Unsupported 62.241 -+ * check types return XZ_OPTIONS_ERROR if 62.242 -+ * XZ_DEC_ANY_CHECK was not defined at build time. 62.243 -+ * @XZ_MEM_ERROR: Allocating memory failed. This return code is 62.244 -+ * possible only if the decoder was initialized 62.245 -+ * with XZ_DYNALLOC. The amount of memory that was 62.246 -+ * tried to be allocated was no more than the 62.247 -+ * dict_max argument given to xz_dec_init(). 62.248 -+ * @XZ_MEMLIMIT_ERROR: A bigger LZMA2 dictionary would be needed than 62.249 -+ * allowed by the dict_max argument given to 62.250 -+ * xz_dec_init(). This return value is possible 62.251 -+ * only in multi-call mode (XZ_PREALLOC or 62.252 -+ * XZ_DYNALLOC); the single-call mode (XZ_SINGLE) 62.253 -+ * ignores the dict_max argument. 62.254 -+ * @XZ_FORMAT_ERROR: File format was not recognized (wrong magic 62.255 -+ * bytes). 62.256 -+ * @XZ_OPTIONS_ERROR: This implementation doesn't support the requested 62.257 -+ * compression options. In the decoder this means 62.258 -+ * that the header CRC32 matches, but the header 62.259 -+ * itself specifies something that we don't support. 62.260 -+ * @XZ_DATA_ERROR: Compressed data is corrupt. 62.261 -+ * @XZ_BUF_ERROR: Cannot make any progress. Details are slightly 62.262 -+ * different between multi-call and single-call 62.263 -+ * mode; more information below. 62.264 -+ * 62.265 -+ * In multi-call mode, XZ_BUF_ERROR is returned when two consecutive calls 62.266 -+ * to XZ code cannot consume any input and cannot produce any new output. 62.267 -+ * This happens when there is no new input available, or the output buffer 62.268 -+ * is full while at least one output byte is still pending. Assuming your 62.269 -+ * code is not buggy, you can get this error only when decoding a compressed 62.270 -+ * stream that is truncated or otherwise corrupt. 62.271 -+ * 62.272 -+ * In single-call mode, XZ_BUF_ERROR is returned only when the output buffer 62.273 -+ * is too small or the compressed input is corrupt in a way that makes the 62.274 -+ * decoder produce more output than the caller expected. When it is 62.275 -+ * (relatively) clear that the compressed input is truncated, XZ_DATA_ERROR 62.276 -+ * is used instead of XZ_BUF_ERROR. 62.277 -+ */ 62.278 -+enum xz_ret { 62.279 -+ XZ_OK, 62.280 -+ XZ_STREAM_END, 62.281 -+ XZ_UNSUPPORTED_CHECK, 62.282 -+ XZ_MEM_ERROR, 62.283 -+ XZ_MEMLIMIT_ERROR, 62.284 -+ XZ_FORMAT_ERROR, 62.285 -+ XZ_OPTIONS_ERROR, 62.286 -+ XZ_DATA_ERROR, 62.287 -+ XZ_BUF_ERROR 62.288 -+}; 62.289 -+ 62.290 -+/** 62.291 -+ * struct xz_buf - Passing input and output buffers to XZ code 62.292 -+ * @in: Beginning of the input buffer. This may be NULL if and only 62.293 -+ * if in_pos is equal to in_size. 62.294 -+ * @in_pos: Current position in the input buffer. This must not exceed 62.295 -+ * in_size. 62.296 -+ * @in_size: Size of the input buffer 62.297 -+ * @out: Beginning of the output buffer. This may be NULL if and only 62.298 -+ * if out_pos is equal to out_size. 62.299 -+ * @out_pos: Current position in the output buffer. This must not exceed 62.300 -+ * out_size. 62.301 -+ * @out_size: Size of the output buffer 62.302 -+ * 62.303 -+ * Only the contents of the output buffer from out[out_pos] onward, and 62.304 -+ * the variables in_pos and out_pos are modified by the XZ code. 62.305 -+ */ 62.306 -+struct xz_buf { 62.307 -+ const uint8_t *in; 62.308 -+ size_t in_pos; 62.309 -+ size_t in_size; 62.310 -+ 62.311 -+ uint8_t *out; 62.312 -+ size_t out_pos; 62.313 -+ size_t out_size; 62.314 -+}; 62.315 -+ 62.316 -+/** 62.317 -+ * struct xz_dec - Opaque type to hold the XZ decoder state 62.318 -+ */ 62.319 -+struct xz_dec; 62.320 -+ 62.321 -+/** 62.322 -+ * xz_dec_init() - Allocate and initialize a XZ decoder state 62.323 -+ * @mode: Operation mode 62.324 -+ * @dict_max: Maximum size of the LZMA2 dictionary (history buffer) for 62.325 -+ * multi-call decoding. This is ignored in single-call mode 62.326 -+ * (mode == XZ_SINGLE). LZMA2 dictionary is always 2^n bytes 62.327 -+ * or 2^n + 2^(n-1) bytes (the latter sizes are less common 62.328 -+ * in practice), so other values for dict_max don't make sense. 62.329 -+ * In the kernel, dictionary sizes of 64 KiB, 128 KiB, 256 KiB, 62.330 -+ * 512 KiB, and 1 MiB are probably the only reasonable values, 62.331 -+ * except for kernel and initramfs images where a bigger 62.332 -+ * dictionary can be fine and useful. 62.333 -+ * 62.334 -+ * Single-call mode (XZ_SINGLE): xz_dec_run() decodes the whole stream at 62.335 -+ * once. The caller must provide enough output space or the decoding will 62.336 -+ * fail. The output space is used as the dictionary buffer, which is why 62.337 -+ * there is no need to allocate the dictionary as part of the decoder's 62.338 -+ * internal state. 62.339 -+ * 62.340 -+ * Because the output buffer is used as the workspace, streams encoded using 62.341 -+ * a big dictionary are not a problem in single-call mode. It is enough that 62.342 -+ * the output buffer is big enough to hold the actual uncompressed data; it 62.343 -+ * can be smaller than the dictionary size stored in the stream headers. 62.344 -+ * 62.345 -+ * Multi-call mode with preallocated dictionary (XZ_PREALLOC): dict_max bytes 62.346 -+ * of memory is preallocated for the LZMA2 dictionary. This way there is no 62.347 -+ * risk that xz_dec_run() could run out of memory, since xz_dec_run() will 62.348 -+ * never allocate any memory. Instead, if the preallocated dictionary is too 62.349 -+ * small for decoding the given input stream, xz_dec_run() will return 62.350 -+ * XZ_MEMLIMIT_ERROR. Thus, it is important to know what kind of data will be 62.351 -+ * decoded to avoid allocating excessive amount of memory for the dictionary. 62.352 -+ * 62.353 -+ * Multi-call mode with dynamically allocated dictionary (XZ_DYNALLOC): 62.354 -+ * dict_max specifies the maximum allowed dictionary size that xz_dec_run() 62.355 -+ * may allocate once it has parsed the dictionary size from the stream 62.356 -+ * headers. This way excessive allocations can be avoided while still 62.357 -+ * limiting the maximum memory usage to a sane value to prevent running the 62.358 -+ * system out of memory when decompressing streams from untrusted sources. 62.359 -+ * 62.360 -+ * On success, xz_dec_init() returns a pointer to struct xz_dec, which is 62.361 -+ * ready to be used with xz_dec_run(). If memory allocation fails, 62.362 -+ * xz_dec_init() returns NULL. 62.363 -+ */ 62.364 -+XZ_EXTERN struct xz_dec *xz_dec_init(enum xz_mode mode, uint32_t dict_max); 62.365 -+ 62.366 -+/** 62.367 -+ * xz_dec_run() - Run the XZ decoder 62.368 -+ * @s: Decoder state allocated using xz_dec_init() 62.369 -+ * @b: Input and output buffers 62.370 -+ * 62.371 -+ * The possible return values depend on build options and operation mode. 62.372 -+ * See enum xz_ret for details. 62.373 -+ * 62.374 -+ * Note that if an error occurs in single-call mode (return value is not 62.375 -+ * XZ_STREAM_END), b->in_pos and b->out_pos are not modified and the 62.376 -+ * contents of the output buffer from b->out[b->out_pos] onward are 62.377 -+ * undefined. This is true even after XZ_BUF_ERROR, because with some filter 62.378 -+ * chains, there may be a second pass over the output buffer, and this pass 62.379 -+ * cannot be properly done if the output buffer is truncated. Thus, you 62.380 -+ * cannot give the single-call decoder a too small buffer and then expect to 62.381 -+ * get that amount valid data from the beginning of the stream. You must use 62.382 -+ * the multi-call decoder if you don't want to uncompress the whole stream. 62.383 -+ */ 62.384 -+XZ_EXTERN enum xz_ret xz_dec_run(struct xz_dec *s, struct xz_buf *b); 62.385 -+ 62.386 -+/** 62.387 -+ * xz_dec_reset() - Reset an already allocated decoder state 62.388 -+ * @s: Decoder state allocated using xz_dec_init() 62.389 -+ * 62.390 -+ * This function can be used to reset the multi-call decoder state without 62.391 -+ * freeing and reallocating memory with xz_dec_end() and xz_dec_init(). 62.392 -+ * 62.393 -+ * In single-call mode, xz_dec_reset() is always called in the beginning of 62.394 -+ * xz_dec_run(). Thus, explicit call to xz_dec_reset() is useful only in 62.395 -+ * multi-call mode. 62.396 -+ */ 62.397 -+XZ_EXTERN void xz_dec_reset(struct xz_dec *s); 62.398 -+ 62.399 -+/** 62.400 -+ * xz_dec_end() - Free the memory allocated for the decoder state 62.401 -+ * @s: Decoder state allocated using xz_dec_init(). If s is NULL, 62.402 -+ * this function does nothing. 62.403 -+ */ 62.404 -+XZ_EXTERN void xz_dec_end(struct xz_dec *s); 62.405 -+ 62.406 -+/* 62.407 -+ * Standalone build (userspace build or in-kernel build for boot time use) 62.408 -+ * needs a CRC32 implementation. For normal in-kernel use, kernel's own 62.409 -+ * CRC32 module is used instead, and users of this module don't need to 62.410 -+ * care about the functions below. 62.411 -+ */ 62.412 -+#ifndef XZ_INTERNAL_CRC32 62.413 -+# ifdef __KERNEL__ 62.414 -+# define XZ_INTERNAL_CRC32 0 62.415 -+# else 62.416 -+# define XZ_INTERNAL_CRC32 1 62.417 -+# endif 62.418 -+#endif 62.419 -+ 62.420 -+#if XZ_INTERNAL_CRC32 62.421 -+/* 62.422 -+ * This must be called before any other xz_* function to initialize 62.423 -+ * the CRC32 lookup table. 62.424 -+ */ 62.425 -+XZ_EXTERN void xz_crc32_init(void); 62.426 -+ 62.427 -+/* 62.428 -+ * Update CRC32 value using the polynomial from IEEE-802.3. To start a new 62.429 -+ * calculation, the third argument must be zero. To continue the calculation, 62.430 -+ * the previously returned value is passed as the third argument. 62.431 -+ */ 62.432 -+XZ_EXTERN uint32_t xz_crc32(const uint8_t *buf, size_t size, uint32_t crc); 62.433 -+#endif 62.434 -+#endif 62.435 -diff --git a/lib/Kconfig b/lib/Kconfig 62.436 -index fa9bf2c..6090314 100644 62.437 ---- a/lib/Kconfig 62.438 -+++ b/lib/Kconfig 62.439 -@@ -106,6 +106,8 @@ config LZO_COMPRESS 62.440 - config LZO_DECOMPRESS 62.441 - tristate 62.442 - 62.443 -+source "lib/xz/Kconfig" 62.444 -+ 62.445 - # 62.446 - # These all provide a common interface (hence the apparent duplication with 62.447 - # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) 62.448 -diff --git a/lib/Makefile b/lib/Makefile 62.449 -index e6a3763..f2f98dd 100644 62.450 ---- a/lib/Makefile 62.451 -+++ b/lib/Makefile 62.452 -@@ -69,6 +69,7 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/ 62.453 - obj-$(CONFIG_REED_SOLOMON) += reed_solomon/ 62.454 - obj-$(CONFIG_LZO_COMPRESS) += lzo/ 62.455 - obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ 62.456 -+obj-$(CONFIG_XZ_DEC) += xz/ 62.457 - obj-$(CONFIG_RAID6_PQ) += raid6/ 62.458 - 62.459 - lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o 62.460 -diff --git a/lib/xz/Kconfig b/lib/xz/Kconfig 62.461 -new file mode 100644 62.462 -index 0000000..e3b6e18 62.463 ---- /dev/null 62.464 -+++ b/lib/xz/Kconfig 62.465 -@@ -0,0 +1,59 @@ 62.466 -+config XZ_DEC 62.467 -+ tristate "XZ decompression support" 62.468 -+ select CRC32 62.469 -+ help 62.470 -+ LZMA2 compression algorithm and BCJ filters are supported using 62.471 -+ the .xz file format as the container. For integrity checking, 62.472 -+ CRC32 is supported. See Documentation/xz.txt for more information. 62.473 -+ 62.474 -+config XZ_DEC_X86 62.475 -+ bool "x86 BCJ filter decoder" if EMBEDDED 62.476 -+ default y 62.477 -+ depends on XZ_DEC 62.478 -+ select XZ_DEC_BCJ 62.479 -+ 62.480 -+config XZ_DEC_POWERPC 62.481 -+ bool "PowerPC BCJ filter decoder" if EMBEDDED 62.482 -+ default y 62.483 -+ depends on XZ_DEC 62.484 -+ select XZ_DEC_BCJ 62.485 -+ 62.486 -+config XZ_DEC_IA64 62.487 -+ bool "IA-64 BCJ filter decoder" if EMBEDDED 62.488 -+ default y 62.489 -+ depends on XZ_DEC 62.490 -+ select XZ_DEC_BCJ 62.491 -+ 62.492 -+config XZ_DEC_ARM 62.493 -+ bool "ARM BCJ filter decoder" if EMBEDDED 62.494 -+ default y 62.495 -+ depends on XZ_DEC 62.496 -+ select XZ_DEC_BCJ 62.497 -+ 62.498 -+config XZ_DEC_ARMTHUMB 62.499 -+ bool "ARM-Thumb BCJ filter decoder" if EMBEDDED 62.500 -+ default y 62.501 -+ depends on XZ_DEC 62.502 -+ select XZ_DEC_BCJ 62.503 -+ 62.504 -+config XZ_DEC_SPARC 62.505 -+ bool "SPARC BCJ filter decoder" if EMBEDDED 62.506 -+ default y 62.507 -+ depends on XZ_DEC 62.508 -+ select XZ_DEC_BCJ 62.509 -+ 62.510 -+config XZ_DEC_BCJ 62.511 -+ bool 62.512 -+ default n 62.513 -+ 62.514 -+config XZ_DEC_TEST 62.515 -+ tristate "XZ decompressor tester" 62.516 -+ default n 62.517 -+ depends on XZ_DEC 62.518 -+ help 62.519 -+ This allows passing .xz files to the in-kernel XZ decoder via 62.520 -+ a character special file. It calculates CRC32 of the decompressed 62.521 -+ data and writes diagnostics to the system log. 62.522 -+ 62.523 -+ Unless you are developing the XZ decoder, you don't need this 62.524 -+ and should say N. 62.525 -diff --git a/lib/xz/Makefile b/lib/xz/Makefile 62.526 -new file mode 100644 62.527 -index 0000000..a7fa769 62.528 ---- /dev/null 62.529 -+++ b/lib/xz/Makefile 62.530 -@@ -0,0 +1,5 @@ 62.531 -+obj-$(CONFIG_XZ_DEC) += xz_dec.o 62.532 -+xz_dec-y := xz_dec_syms.o xz_dec_stream.o xz_dec_lzma2.o 62.533 -+xz_dec-$(CONFIG_XZ_DEC_BCJ) += xz_dec_bcj.o 62.534 -+ 62.535 -+obj-$(CONFIG_XZ_DEC_TEST) += xz_dec_test.o 62.536 -diff --git a/lib/xz/xz_crc32.c b/lib/xz/xz_crc32.c 62.537 -new file mode 100644 62.538 -index 0000000..34532d1 62.539 ---- /dev/null 62.540 -+++ b/lib/xz/xz_crc32.c 62.541 -@@ -0,0 +1,59 @@ 62.542 -+/* 62.543 -+ * CRC32 using the polynomial from IEEE-802.3 62.544 -+ * 62.545 -+ * Authors: Lasse Collin <lasse.collin@tukaani.org> 62.546 -+ * Igor Pavlov <http://7-zip.org/> 62.547 -+ * 62.548 -+ * This file has been put into the public domain. 62.549 -+ * You can do whatever you want with this file. 62.550 -+ */ 62.551 -+ 62.552 -+/* 62.553 -+ * This is not the fastest implementation, but it is pretty compact. 62.554 -+ * The fastest versions of xz_crc32() on modern CPUs without hardware 62.555 -+ * accelerated CRC instruction are 3-5 times as fast as this version, 62.556 -+ * but they are bigger and use more memory for the lookup table. 62.557 -+ */ 62.558 -+ 62.559 -+#include "xz_private.h" 62.560 -+ 62.561 -+/* 62.562 -+ * STATIC_RW_DATA is used in the pre-boot environment on some architectures. 62.563 -+ * See <linux/decompress/mm.h> for details. 62.564 -+ */ 62.565 -+#ifndef STATIC_RW_DATA 62.566 -+# define STATIC_RW_DATA static 62.567 -+#endif 62.568 -+ 62.569 -+STATIC_RW_DATA uint32_t xz_crc32_table[256]; 62.570 -+ 62.571 -+XZ_EXTERN void xz_crc32_init(void) 62.572 -+{ 62.573 -+ const uint32_t poly = 0xEDB88320; 62.574 -+ 62.575 -+ uint32_t i; 62.576 -+ uint32_t j; 62.577 -+ uint32_t r; 62.578 -+ 62.579 -+ for (i = 0; i < 256; ++i) { 62.580 -+ r = i; 62.581 -+ for (j = 0; j < 8; ++j) 62.582 -+ r = (r >> 1) ^ (poly & ~((r & 1) - 1)); 62.583 -+ 62.584 -+ xz_crc32_table[i] = r; 62.585 -+ } 62.586 -+ 62.587 -+ return; 62.588 -+} 62.589 -+ 62.590 -+XZ_EXTERN uint32_t xz_crc32(const uint8_t *buf, size_t size, uint32_t crc) 62.591 -+{ 62.592 -+ crc = ~crc; 62.593 -+ 62.594 -+ while (size != 0) { 62.595 -+ crc = xz_crc32_table[*buf++ ^ (crc & 0xFF)] ^ (crc >> 8); 62.596 -+ --size; 62.597 -+ } 62.598 -+ 62.599 -+ return ~crc; 62.600 -+} 62.601 -diff --git a/lib/xz/xz_dec_bcj.c b/lib/xz/xz_dec_bcj.c 62.602 -new file mode 100644 62.603 -index 0000000..e51e255 62.604 ---- /dev/null 62.605 -+++ b/lib/xz/xz_dec_bcj.c 62.606 -@@ -0,0 +1,561 @@ 62.607 -+/* 62.608 -+ * Branch/Call/Jump (BCJ) filter decoders 62.609 -+ * 62.610 -+ * Authors: Lasse Collin <lasse.collin@tukaani.org> 62.611 -+ * Igor Pavlov <http://7-zip.org/> 62.612 -+ * 62.613 -+ * This file has been put into the public domain. 62.614 -+ * You can do whatever you want with this file. 62.615 -+ */ 62.616 -+ 62.617 -+#include "xz_private.h" 62.618 -+ 62.619 -+/* 62.620 -+ * The rest of the file is inside this ifdef. It makes things a little more 62.621 -+ * convenient when building without support for any BCJ filters. 62.622 -+ */ 62.623 -+#ifdef XZ_DEC_BCJ 62.624 -+ 62.625 -+struct xz_dec_bcj { 62.626 -+ /* Type of the BCJ filter being used */ 62.627 -+ enum { 62.628 -+ BCJ_X86 = 4, /* x86 or x86-64 */ 62.629 -+ BCJ_POWERPC = 5, /* Big endian only */ 62.630 -+ BCJ_IA64 = 6, /* Big or little endian */ 62.631 -+ BCJ_ARM = 7, /* Little endian only */ 62.632 -+ BCJ_ARMTHUMB = 8, /* Little endian only */ 62.633 -+ BCJ_SPARC = 9 /* Big or little endian */ 62.634 -+ } type; 62.635 -+ 62.636 -+ /* 62.637 -+ * Return value of the next filter in the chain. We need to preserve 62.638 -+ * this information across calls, because we must not call the next 62.639 -+ * filter anymore once it has returned XZ_STREAM_END. 62.640 -+ */ 62.641 -+ enum xz_ret ret; 62.642 -+ 62.643 -+ /* True if we are operating in single-call mode. */ 62.644 -+ bool single_call; 62.645 -+ 62.646 -+ /* 62.647 -+ * Absolute position relative to the beginning of the uncompressed 62.648 -+ * data (in a single .xz Block). We care only about the lowest 32 62.649 -+ * bits so this doesn't need to be uint64_t even with big files. 62.650 -+ */ 62.651 -+ uint32_t pos; 62.652 -+ 62.653 -+ /* x86 filter state */ 62.654 -+ uint32_t x86_prev_mask; 62.655 -+ 62.656 -+ /* Temporary space to hold the variables from struct xz_buf */ 62.657 -+ uint8_t *out; 62.658 -+ size_t out_pos; 62.659 -+ size_t out_size; 62.660 -+ 62.661 -+ struct { 62.662 -+ /* Amount of already filtered data in the beginning of buf */ 62.663 -+ size_t filtered; 62.664 -+ 62.665 -+ /* Total amount of data currently stored in buf */ 62.666 -+ size_t size; 62.667 -+ 62.668 -+ /* 62.669 -+ * Buffer to hold a mix of filtered and unfiltered data. This 62.670 -+ * needs to be big enough to hold Alignment + 2 * Look-ahead: 62.671 -+ * 62.672 -+ * Type Alignment Look-ahead 62.673 -+ * x86 1 4 62.674 -+ * PowerPC 4 0 62.675 -+ * IA-64 16 0 62.676 -+ * ARM 4 0 62.677 -+ * ARM-Thumb 2 2 62.678 -+ * SPARC 4 0 62.679 -+ */ 62.680 -+ uint8_t buf[16]; 62.681 -+ } temp; 62.682 -+}; 62.683 -+ 62.684 -+#ifdef XZ_DEC_X86 62.685 -+/* 62.686 -+ * This is used to test the most significant byte of a memory address 62.687 -+ * in an x86 instruction. 62.688 -+ */ 62.689 -+static inline int bcj_x86_test_msbyte(uint8_t b) 62.690 -+{ 62.691 -+ return b == 0x00 || b == 0xFF; 62.692 -+} 62.693 -+ 62.694 -+static size_t bcj_x86(struct xz_dec_bcj *s, uint8_t *buf, size_t size) 62.695 -+{ 62.696 -+ static const bool mask_to_allowed_status[8] 62.697 -+ = { true, true, true, false, true, false, false, false }; 62.698 -+ 62.699 -+ static const uint8_t mask_to_bit_num[8] = { 0, 1, 2, 2, 3, 3, 3, 3 }; 62.700 -+ 62.701 -+ size_t i; 62.702 -+ size_t prev_pos = (size_t)-1; 62.703 -+ uint32_t prev_mask = s->x86_prev_mask; 62.704 -+ uint32_t src; 62.705 -+ uint32_t dest; 62.706 -+ uint32_t j; 62.707 -+ uint8_t b; 62.708 -+ 62.709 -+ if (size <= 4) 62.710 -+ return 0; 62.711 -+ 62.712 -+ size -= 4; 62.713 -+ for (i = 0; i < size; ++i) { 62.714 -+ if ((buf[i] & 0xFE) != 0xE8) 62.715 -+ continue; 62.716 -+ 62.717 -+ prev_pos = i - prev_pos; 62.718 -+ if (prev_pos > 3) { 62.719 -+ prev_mask = 0; 62.720 -+ } else { 62.721 -+ prev_mask = (prev_mask << (prev_pos - 1)) & 7; 62.722 -+ if (prev_mask != 0) { 62.723 -+ b = buf[i + 4 - mask_to_bit_num[prev_mask]]; 62.724 -+ if (!mask_to_allowed_status[prev_mask] 62.725 -+ || bcj_x86_test_msbyte(b)) { 62.726 -+ prev_pos = i; 62.727 -+ prev_mask = (prev_mask << 1) | 1; 62.728 -+ continue; 62.729 -+ } 62.730 -+ } 62.731 -+ } 62.732 -+ 62.733 -+ prev_pos = i; 62.734 -+ 62.735 -+ if (bcj_x86_test_msbyte(buf[i + 4])) { 62.736 -+ src = get_unaligned_le32(buf + i + 1); 62.737 -+ while (true) { 62.738 -+ dest = src - (s->pos + (uint32_t)i + 5); 62.739 -+ if (prev_mask == 0) 62.740 -+ break; 62.741 -+ 62.742 -+ j = mask_to_bit_num[prev_mask] * 8; 62.743 -+ b = (uint8_t)(dest >> (24 - j)); 62.744 -+ if (!bcj_x86_test_msbyte(b)) 62.745 -+ break; 62.746 -+ 62.747 -+ src = dest ^ (((uint32_t)1 << (32 - j)) - 1); 62.748 -+ } 62.749 -+ 62.750 -+ dest &= 0x01FFFFFF; 62.751 -+ dest |= (uint32_t)0 - (dest & 0x01000000); 62.752 -+ put_unaligned_le32(dest, buf + i + 1); 62.753 -+ i += 4; 62.754 -+ } else { 62.755 -+ prev_mask = (prev_mask << 1) | 1; 62.756 -+ } 62.757 -+ } 62.758 -+ 62.759 -+ prev_pos = i - prev_pos; 62.760 -+ s->x86_prev_mask = prev_pos > 3 ? 0 : prev_mask << (prev_pos - 1); 62.761 -+ return i; 62.762 -+} 62.763 -+#endif 62.764 -+ 62.765 -+#ifdef XZ_DEC_POWERPC 62.766 -+static size_t bcj_powerpc(struct xz_dec_bcj *s, uint8_t *buf, size_t size) 62.767 -+{ 62.768 -+ size_t i; 62.769 -+ uint32_t instr; 62.770 -+ 62.771 -+ for (i = 0; i + 4 <= size; i += 4) { 62.772 -+ instr = get_unaligned_be32(buf + i); 62.773 -+ if ((instr & 0xFC000003) == 0x48000001) { 62.774 -+ instr &= 0x03FFFFFC; 62.775 -+ instr -= s->pos + (uint32_t)i; 62.776 -+ instr &= 0x03FFFFFC; 62.777 -+ instr |= 0x48000001; 62.778 -+ put_unaligned_be32(instr, buf + i); 62.779 -+ } 62.780 -+ } 62.781 -+ 62.782 -+ return i; 62.783 -+} 62.784 -+#endif 62.785 -+ 62.786 -+#ifdef XZ_DEC_IA64 62.787 -+static size_t bcj_ia64(struct xz_dec_bcj *s, uint8_t *buf, size_t size) 62.788 -+{ 62.789 -+ static const uint8_t branch_table[32] = { 62.790 -+ 0, 0, 0, 0, 0, 0, 0, 0, 62.791 -+ 0, 0, 0, 0, 0, 0, 0, 0, 62.792 -+ 4, 4, 6, 6, 0, 0, 7, 7, 62.793 -+ 4, 4, 0, 0, 4, 4, 0, 0 62.794 -+ }; 62.795 -+ 62.796 -+ /* 62.797 -+ * The local variables take a little bit stack space, but it's less 62.798 -+ * than what LZMA2 decoder takes, so it doesn't make sense to reduce 62.799 -+ * stack usage here without doing that for the LZMA2 decoder too. 62.800 -+ */ 62.801 -+ 62.802 -+ /* Loop counters */ 62.803 -+ size_t i; 62.804 -+ size_t j; 62.805 -+ 62.806 -+ /* Instruction slot (0, 1, or 2) in the 128-bit instruction word */ 62.807 -+ uint32_t slot; 62.808 -+ 62.809 -+ /* Bitwise offset of the instruction indicated by slot */ 62.810 -+ uint32_t bit_pos; 62.811 -+ 62.812 -+ /* bit_pos split into byte and bit parts */ 62.813 -+ uint32_t byte_pos; 62.814 -+ uint32_t bit_res; 62.815 -+ 62.816 -+ /* Address part of an instruction */ 62.817 -+ uint32_t addr; 62.818 -+ 62.819 -+ /* Mask used to detect which instructions to convert */ 62.820 -+ uint32_t mask; 62.821 -+ 62.822 -+ /* 41-bit instruction stored somewhere in the lowest 48 bits */ 62.823 -+ uint64_t instr; 62.824 -+ 62.825 -+ /* Instruction normalized with bit_res for easier manipulation */ 62.826 -+ uint64_t norm; 62.827 -+ 62.828 -+ for (i = 0; i + 16 <= size; i += 16) { 62.829 -+ mask = branch_table[buf[i] & 0x1F]; 62.830 -+ for (slot = 0, bit_pos = 5; slot < 3; ++slot, bit_pos += 41) { 62.831 -+ if (((mask >> slot) & 1) == 0) 62.832 -+ continue; 62.833 -+ 62.834 -+ byte_pos = bit_pos >> 3; 62.835 -+ bit_res = bit_pos & 7; 62.836 -+ instr = 0; 62.837 -+ for (j = 0; j < 6; ++j) 62.838 -+ instr |= (uint64_t)(buf[i + j + byte_pos]) 62.839 -+ << (8 * j); 62.840 -+ 62.841 -+ norm = instr >> bit_res; 62.842 -+ 62.843 -+ if (((norm >> 37) & 0x0F) == 0x05 62.844 -+ && ((norm >> 9) & 0x07) == 0) { 62.845 -+ addr = (norm >> 13) & 0x0FFFFF; 62.846 -+ addr |= ((uint32_t)(norm >> 36) & 1) << 20; 62.847 -+ addr <<= 4; 62.848 -+ addr -= s->pos + (uint32_t)i; 62.849 -+ addr >>= 4; 62.850 -+ 62.851 -+ norm &= ~((uint64_t)0x8FFFFF << 13); 62.852 -+ norm |= (uint64_t)(addr & 0x0FFFFF) << 13; 62.853 -+ norm |= (uint64_t)(addr & 0x100000) 62.854 -+ << (36 - 20); 62.855 -+ 62.856 -+ instr &= (1 << bit_res) - 1; 62.857 -+ instr |= norm << bit_res; 62.858 -+ 62.859 -+ for (j = 0; j < 6; j++) 62.860 -+ buf[i + j + byte_pos] 62.861 -+ = (uint8_t)(instr >> (8 * j)); 62.862 -+ } 62.863 -+ } 62.864 -+ } 62.865 -+ 62.866 -+ return i; 62.867 -+} 62.868 -+#endif 62.869 -+ 62.870 -+#ifdef XZ_DEC_ARM 62.871 -+static size_t bcj_arm(struct xz_dec_bcj *s, uint8_t *buf, size_t size) 62.872 -+{ 62.873 -+ size_t i; 62.874 -+ uint32_t addr; 62.875 -+ 62.876 -+ for (i = 0; i + 4 <= size; i += 4) { 62.877 -+ if (buf[i + 3] == 0xEB) { 62.878 -+ addr = (uint32_t)buf[i] | ((uint32_t)buf[i + 1] << 8) 62.879 -+ | ((uint32_t)buf[i + 2] << 16); 62.880 -+ addr <<= 2; 62.881 -+ addr -= s->pos + (uint32_t)i + 8; 62.882 -+ addr >>= 2; 62.883 -+ buf[i] = (uint8_t)addr; 62.884 -+ buf[i + 1] = (uint8_t)(addr >> 8); 62.885 -+ buf[i + 2] = (uint8_t)(addr >> 16); 62.886 -+ } 62.887 -+ } 62.888 -+ 62.889 -+ return i; 62.890 -+} 62.891 -+#endif 62.892 -+ 62.893 -+#ifdef XZ_DEC_ARMTHUMB 62.894 -+static size_t bcj_armthumb(struct xz_dec_bcj *s, uint8_t *buf, size_t size) 62.895 -+{ 62.896 -+ size_t i; 62.897 -+ uint32_t addr; 62.898 -+ 62.899 -+ for (i = 0; i + 4 <= size; i += 2) { 62.900 -+ if ((buf[i + 1] & 0xF8) == 0xF0 62.901 -+ && (buf[i + 3] & 0xF8) == 0xF8) { 62.902 -+ addr = (((uint32_t)buf[i + 1] & 0x07) << 19) 62.903 -+ | ((uint32_t)buf[i] << 11) 62.904 -+ | (((uint32_t)buf[i + 3] & 0x07) << 8) 62.905 -+ | (uint32_t)buf[i + 2]; 62.906 -+ addr <<= 1; 62.907 -+ addr -= s->pos + (uint32_t)i + 4; 62.908 -+ addr >>= 1; 62.909 -+ buf[i + 1] = (uint8_t)(0xF0 | ((addr >> 19) & 0x07)); 62.910 -+ buf[i] = (uint8_t)(addr >> 11); 62.911 -+ buf[i + 3] = (uint8_t)(0xF8 | ((addr >> 8) & 0x07)); 62.912 -+ buf[i + 2] = (uint8_t)addr; 62.913 -+ i += 2; 62.914 -+ } 62.915 -+ } 62.916 -+ 62.917 -+ return i; 62.918 -+} 62.919 -+#endif 62.920 -+ 62.921 -+#ifdef XZ_DEC_SPARC 62.922 -+static size_t bcj_sparc(struct xz_dec_bcj *s, uint8_t *buf, size_t size) 62.923 -+{ 62.924 -+ size_t i; 62.925 -+ uint32_t instr; 62.926 -+ 62.927 -+ for (i = 0; i + 4 <= size; i += 4) { 62.928 -+ instr = get_unaligned_be32(buf + i); 62.929 -+ if ((instr >> 22) == 0x100 || (instr >> 22) == 0x1FF) { 62.930 -+ instr <<= 2; 62.931 -+ instr -= s->pos + (uint32_t)i; 62.932 -+ instr >>= 2; 62.933 -+ instr = ((uint32_t)0x40000000 - (instr & 0x400000)) 62.934 -+ | 0x40000000 | (instr & 0x3FFFFF); 62.935 -+ put_unaligned_be32(instr, buf + i); 62.936 -+ } 62.937 -+ } 62.938 -+ 62.939 -+ return i; 62.940 -+} 62.941 -+#endif 62.942 -+ 62.943 -+/* 62.944 -+ * Apply the selected BCJ filter. Update *pos and s->pos to match the amount 62.945 -+ * of data that got filtered. 62.946 -+ * 62.947 -+ * NOTE: This is implemented as a switch statement to avoid using function 62.948 -+ * pointers, which could be problematic in the kernel boot code, which must 62.949 -+ * avoid pointers to static data (at least on x86). 62.950 -+ */ 62.951 -+static void bcj_apply(struct xz_dec_bcj *s, 62.952 -+ uint8_t *buf, size_t *pos, size_t size) 62.953 -+{ 62.954 -+ size_t filtered; 62.955 -+ 62.956 -+ buf += *pos; 62.957 -+ size -= *pos; 62.958 -+ 62.959 -+ switch (s->type) { 62.960 -+#ifdef XZ_DEC_X86 62.961 -+ case BCJ_X86: 62.962 -+ filtered = bcj_x86(s, buf, size); 62.963 -+ break; 62.964 -+#endif 62.965 -+#ifdef XZ_DEC_POWERPC 62.966 -+ case BCJ_POWERPC: 62.967 -+ filtered = bcj_powerpc(s, buf, size); 62.968 -+ break; 62.969 -+#endif 62.970 -+#ifdef XZ_DEC_IA64 62.971 -+ case BCJ_IA64: 62.972 -+ filtered = bcj_ia64(s, buf, size); 62.973 -+ break; 62.974 -+#endif 62.975 -+#ifdef XZ_DEC_ARM 62.976 -+ case BCJ_ARM: 62.977 -+ filtered = bcj_arm(s, buf, size); 62.978 -+ break; 62.979 -+#endif 62.980 -+#ifdef XZ_DEC_ARMTHUMB 62.981 -+ case BCJ_ARMTHUMB: 62.982 -+ filtered = bcj_armthumb(s, buf, size); 62.983 -+ break; 62.984 -+#endif 62.985 -+#ifdef XZ_DEC_SPARC 62.986 -+ case BCJ_SPARC: 62.987 -+ filtered = bcj_sparc(s, buf, size); 62.988 -+ break; 62.989 -+#endif 62.990 -+ default: 62.991 -+ /* Never reached but silence compiler warnings. */ 62.992 -+ filtered = 0; 62.993 -+ break; 62.994 -+ } 62.995 -+ 62.996 -+ *pos += filtered; 62.997 -+ s->pos += filtered; 62.998 -+} 62.999 -+ 62.1000 -+/* 62.1001 -+ * Flush pending filtered data from temp to the output buffer. 62.1002 -+ * Move the remaining mixture of possibly filtered and unfiltered 62.1003 -+ * data to the beginning of temp. 62.1004 -+ */ 62.1005 -+static void bcj_flush(struct xz_dec_bcj *s, struct xz_buf *b) 62.1006 -+{ 62.1007 -+ size_t copy_size; 62.1008 -+ 62.1009 -+ copy_size = min_t(size_t, s->temp.filtered, b->out_size - b->out_pos); 62.1010 -+ memcpy(b->out + b->out_pos, s->temp.buf, copy_size); 62.1011 -+ b->out_pos += copy_size; 62.1012 -+ 62.1013 -+ s->temp.filtered -= copy_size; 62.1014 -+ s->temp.size -= copy_size; 62.1015 -+ memmove(s->temp.buf, s->temp.buf + copy_size, s->temp.size); 62.1016 -+} 62.1017 -+ 62.1018 -+/* 62.1019 -+ * The BCJ filter functions are primitive in sense that they process the 62.1020 -+ * data in chunks of 1-16 bytes. To hide this issue, this function does 62.1021 -+ * some buffering. 62.1022 -+ */ 62.1023 -+XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s, 62.1024 -+ struct xz_dec_lzma2 *lzma2, 62.1025 -+ struct xz_buf *b) 62.1026 -+{ 62.1027 -+ size_t out_start; 62.1028 -+ 62.1029 -+ /* 62.1030 -+ * Flush pending already filtered data to the output buffer. Return 62.1031 -+ * immediatelly if we couldn't flush everything, or if the next 62.1032 -+ * filter in the chain had already returned XZ_STREAM_END. 62.1033 -+ */ 62.1034 -+ if (s->temp.filtered > 0) { 62.1035 -+ bcj_flush(s, b); 62.1036 -+ if (s->temp.filtered > 0) 62.1037 -+ return XZ_OK; 62.1038 -+ 62.1039 -+ if (s->ret == XZ_STREAM_END) 62.1040 -+ return XZ_STREAM_END; 62.1041 -+ } 62.1042 -+ 62.1043 -+ /* 62.1044 -+ * If we have more output space than what is currently pending in 62.1045 -+ * temp, copy the unfiltered data from temp to the output buffer 62.1046 -+ * and try to fill the output buffer by decoding more data from the 62.1047 -+ * next filter in the chain. Apply the BCJ filter on the new data 62.1048 -+ * in the output buffer. If everything cannot be filtered, copy it 62.1049 -+ * to temp and rewind the output buffer position accordingly. 62.1050 -+ */ 62.1051 -+ if (s->temp.size < b->out_size - b->out_pos) { 62.1052 -+ out_start = b->out_pos; 62.1053 -+ memcpy(b->out + b->out_pos, s->temp.buf, s->temp.size); 62.1054 -+ b->out_pos += s->temp.size; 62.1055 -+ 62.1056 -+ s->ret = xz_dec_lzma2_run(lzma2, b); 62.1057 -+ if (s->ret != XZ_STREAM_END 62.1058 -+ && (s->ret != XZ_OK || s->single_call)) 62.1059 -+ return s->ret; 62.1060 -+ 62.1061 -+ bcj_apply(s, b->out, &out_start, b->out_pos); 62.1062 -+ 62.1063 -+ /* 62.1064 -+ * As an exception, if the next filter returned XZ_STREAM_END, 62.1065 -+ * we can do that too, since the last few bytes that remain 62.1066 -+ * unfiltered are meant to remain unfiltered. 62.1067 -+ */ 62.1068 -+ if (s->ret == XZ_STREAM_END) 62.1069 -+ return XZ_STREAM_END; 62.1070 -+ 62.1071 -+ s->temp.size = b->out_pos - out_start; 62.1072 -+ b->out_pos -= s->temp.size; 62.1073 -+ memcpy(s->temp.buf, b->out + b->out_pos, s->temp.size); 62.1074 -+ } 62.1075 -+ 62.1076 -+ /* 62.1077 -+ * If we have unfiltered data in temp, try to fill by decoding more 62.1078 -+ * data from the next filter. Apply the BCJ filter on temp. Then we 62.1079 -+ * hopefully can fill the actual output buffer by copying filtered 62.1080 -+ * data from temp. A mix of filtered and unfiltered data may be left 62.1081 -+ * in temp; it will be taken care on the next call to this function. 62.1082 -+ */ 62.1083 -+ if (s->temp.size > 0) { 62.1084 -+ /* Make b->out{,_pos,_size} temporarily point to s->temp. */ 62.1085 -+ s->out = b->out; 62.1086 -+ s->out_pos = b->out_pos; 62.1087 -+ s->out_size = b->out_size; 62.1088 -+ b->out = s->temp.buf; 62.1089 -+ b->out_pos = s->temp.size; 62.1090 -+ b->out_size = sizeof(s->temp.buf); 62.1091 -+ 62.1092 -+ s->ret = xz_dec_lzma2_run(lzma2, b); 62.1093 -+ 62.1094 -+ s->temp.size = b->out_pos; 62.1095 -+ b->out = s->out; 62.1096 -+ b->out_pos = s->out_pos; 62.1097 -+ b->out_size = s->out_size; 62.1098 -+ 62.1099 -+ if (s->ret != XZ_OK && s->ret != XZ_STREAM_END) 62.1100 -+ return s->ret; 62.1101 -+ 62.1102 -+ bcj_apply(s, s->temp.buf, &s->temp.filtered, s->temp.size); 62.1103 -+ 62.1104 -+ /* 62.1105 -+ * If the next filter returned XZ_STREAM_END, we mark that 62.1106 -+ * everything is filtered, since the last unfiltered bytes 62.1107 -+ * of the stream are meant to be left as is. 62.1108 -+ */ 62.1109 -+ if (s->ret == XZ_STREAM_END) 62.1110 -+ s->temp.filtered = s->temp.size; 62.1111 -+ 62.1112 -+ bcj_flush(s, b); 62.1113 -+ if (s->temp.filtered > 0) 62.1114 -+ return XZ_OK; 62.1115 -+ } 62.1116 -+ 62.1117 -+ return s->ret; 62.1118 -+} 62.1119 -+ 62.1120 -+XZ_EXTERN struct xz_dec_bcj *xz_dec_bcj_create(bool single_call) 62.1121 -+{ 62.1122 -+ struct xz_dec_bcj *s = kmalloc(sizeof(*s), GFP_KERNEL); 62.1123 -+ if (s != NULL) 62.1124 -+ s->single_call = single_call; 62.1125 -+ 62.1126 -+ return s; 62.1127 -+} 62.1128 -+ 62.1129 -+XZ_EXTERN enum xz_ret xz_dec_bcj_reset(struct xz_dec_bcj *s, uint8_t id) 62.1130 -+{ 62.1131 -+ switch (id) { 62.1132 -+#ifdef XZ_DEC_X86 62.1133 -+ case BCJ_X86: 62.1134 -+#endif 62.1135 -+#ifdef XZ_DEC_POWERPC 62.1136 -+ case BCJ_POWERPC: 62.1137 -+#endif 62.1138 -+#ifdef XZ_DEC_IA64 62.1139 -+ case BCJ_IA64: 62.1140 -+#endif 62.1141 -+#ifdef XZ_DEC_ARM 62.1142 -+ case BCJ_ARM: 62.1143 -+#endif 62.1144 -+#ifdef XZ_DEC_ARMTHUMB 62.1145 -+ case BCJ_ARMTHUMB: 62.1146 -+#endif 62.1147 -+#ifdef XZ_DEC_SPARC 62.1148 -+ case BCJ_SPARC: 62.1149 -+#endif 62.1150 -+ break; 62.1151 -+ 62.1152 -+ default: 62.1153 -+ /* Unsupported Filter ID */ 62.1154 -+ return XZ_OPTIONS_ERROR; 62.1155 -+ } 62.1156 -+ 62.1157 -+ s->type = id; 62.1158 -+ s->ret = XZ_OK; 62.1159 -+ s->pos = 0; 62.1160 -+ s->x86_prev_mask = 0; 62.1161 -+ s->temp.filtered = 0; 62.1162 -+ s->temp.size = 0; 62.1163 -+ 62.1164 -+ return XZ_OK; 62.1165 -+} 62.1166 -+ 62.1167 -+#endif 62.1168 -diff --git a/lib/xz/xz_dec_lzma2.c b/lib/xz/xz_dec_lzma2.c 62.1169 -new file mode 100644 62.1170 -index 0000000..ea5fa4f 62.1171 ---- /dev/null 62.1172 -+++ b/lib/xz/xz_dec_lzma2.c 62.1173 -@@ -0,0 +1,1171 @@ 62.1174 -+/* 62.1175 -+ * LZMA2 decoder 62.1176 -+ * 62.1177 -+ * Authors: Lasse Collin <lasse.collin@tukaani.org> 62.1178 -+ * Igor Pavlov <http://7-zip.org/> 62.1179 -+ * 62.1180 -+ * This file has been put into the public domain. 62.1181 -+ * You can do whatever you want with this file. 62.1182 -+ */ 62.1183 -+ 62.1184 -+#include "xz_private.h" 62.1185 -+#include "xz_lzma2.h" 62.1186 -+ 62.1187 -+/* 62.1188 -+ * Range decoder initialization eats the first five bytes of each LZMA chunk. 62.1189 -+ */ 62.1190 -+#define RC_INIT_BYTES 5 62.1191 -+ 62.1192 -+/* 62.1193 -+ * Minimum number of usable input buffer to safely decode one LZMA symbol. 62.1194 -+ * The worst case is that we decode 22 bits using probabilities and 26 62.1195 -+ * direct bits. This may decode at maximum of 20 bytes of input. However, 62.1196 -+ * lzma_main() does an extra normalization before returning, thus we 62.1197 -+ * need to put 21 here. 62.1198 -+ */ 62.1199 -+#define LZMA_IN_REQUIRED 21 62.1200 -+ 62.1201 -+/* 62.1202 -+ * Dictionary (history buffer) 62.1203 -+ * 62.1204 -+ * These are always true: 62.1205 -+ * start <= pos <= full <= end 62.1206 -+ * pos <= limit <= end 62.1207 -+ * 62.1208 -+ * In multi-call mode, also these are true: 62.1209 -+ * end == size 62.1210 -+ * size <= size_max 62.1211 -+ * allocated <= size 62.1212 -+ * 62.1213 -+ * Most of these variables are size_t to support single-call mode, 62.1214 -+ * in which the dictionary variables address the actual output 62.1215 -+ * buffer directly. 62.1216 -+ */ 62.1217 -+struct dictionary { 62.1218 -+ /* Beginning of the history buffer */ 62.1219 -+ uint8_t *buf; 62.1220 -+ 62.1221 -+ /* Old position in buf (before decoding more data) */ 62.1222 -+ size_t start; 62.1223 -+ 62.1224 -+ /* Position in buf */ 62.1225 -+ size_t pos; 62.1226 -+ 62.1227 -+ /* 62.1228 -+ * How full dictionary is. This is used to detect corrupt input that 62.1229 -+ * would read beyond the beginning of the uncompressed stream. 62.1230 -+ */ 62.1231 -+ size_t full; 62.1232 -+ 62.1233 -+ /* Write limit; we don't write to buf[limit] or later bytes. */ 62.1234 -+ size_t limit; 62.1235 -+ 62.1236 -+ /* 62.1237 -+ * End of the dictionary buffer. In multi-call mode, this is 62.1238 -+ * the same as the dictionary size. In single-call mode, this 62.1239 -+ * indicates the size of the output buffer. 62.1240 -+ */ 62.1241 -+ size_t end; 62.1242 -+ 62.1243 -+ /* 62.1244 -+ * Size of the dictionary as specified in Block Header. This is used 62.1245 -+ * together with "full" to detect corrupt input that would make us 62.1246 -+ * read beyond the beginning of the uncompressed stream. 62.1247 -+ */ 62.1248 -+ uint32_t size; 62.1249 -+ 62.1250 -+ /* 62.1251 -+ * Maximum allowed dictionary size in multi-call mode. 62.1252 -+ * This is ignored in single-call mode. 62.1253 -+ */ 62.1254 -+ uint32_t size_max; 62.1255 -+ 62.1256 -+ /* 62.1257 -+ * Amount of memory currently allocated for the dictionary. 62.1258 -+ * This is used only with XZ_DYNALLOC. (With XZ_PREALLOC, 62.1259 -+ * size_max is always the same as the allocated size.) 62.1260 -+ */ 62.1261 -+ uint32_t allocated; 62.1262 -+ 62.1263 -+ /* Operation mode */ 62.1264 -+ enum xz_mode mode; 62.1265 -+}; 62.1266 -+ 62.1267 -+/* Range decoder */ 62.1268 -+struct rc_dec { 62.1269 -+ uint32_t range; 62.1270 -+ uint32_t code; 62.1271 -+ 62.1272 -+ /* 62.1273 -+ * Number of initializing bytes remaining to be read 62.1274 -+ * by rc_read_init(). 62.1275 -+ */ 62.1276 -+ uint32_t init_bytes_left; 62.1277 -+ 62.1278 -+ /* 62.1279 -+ * Buffer from which we read our input. It can be either 62.1280 -+ * temp.buf or the caller-provided input buffer. 62.1281 -+ */ 62.1282 -+ const uint8_t *in; 62.1283 -+ size_t in_pos; 62.1284 -+ size_t in_limit; 62.1285 -+}; 62.1286 -+ 62.1287 -+/* Probabilities for a length decoder. */ 62.1288 -+struct lzma_len_dec { 62.1289 -+ /* Probability of match length being at least 10 */ 62.1290 -+ uint16_t choice; 62.1291 -+ 62.1292 -+ /* Probability of match length being at least 18 */ 62.1293 -+ uint16_t choice2; 62.1294 -+ 62.1295 -+ /* Probabilities for match lengths 2-9 */ 62.1296 -+ uint16_t low[POS_STATES_MAX][LEN_LOW_SYMBOLS]; 62.1297 -+ 62.1298 -+ /* Probabilities for match lengths 10-17 */ 62.1299 -+ uint16_t mid[POS_STATES_MAX][LEN_MID_SYMBOLS]; 62.1300 -+ 62.1301 -+ /* Probabilities for match lengths 18-273 */ 62.1302 -+ uint16_t high[LEN_HIGH_SYMBOLS]; 62.1303 -+}; 62.1304 -+ 62.1305 -+struct lzma_dec { 62.1306 -+ /* Distances of latest four matches */ 62.1307 -+ uint32_t rep0; 62.1308 -+ uint32_t rep1; 62.1309 -+ uint32_t rep2; 62.1310 -+ uint32_t rep3; 62.1311 -+ 62.1312 -+ /* Types of the most recently seen LZMA symbols */ 62.1313 -+ enum lzma_state state; 62.1314 -+ 62.1315 -+ /* 62.1316 -+ * Length of a match. This is updated so that dict_repeat can 62.1317 -+ * be called again to finish repeating the whole match. 62.1318 -+ */ 62.1319 -+ uint32_t len; 62.1320 -+ 62.1321 -+ /* 62.1322 -+ * LZMA properties or related bit masks (number of literal 62.1323 -+ * context bits, a mask dervied from the number of literal 62.1324 -+ * position bits, and a mask dervied from the number 62.1325 -+ * position bits) 62.1326 -+ */ 62.1327 -+ uint32_t lc; 62.1328 -+ uint32_t literal_pos_mask; /* (1 << lp) - 1 */ 62.1329 -+ uint32_t pos_mask; /* (1 << pb) - 1 */ 62.1330 -+ 62.1331 -+ /* If 1, it's a match. Otherwise it's a single 8-bit literal. */ 62.1332 -+ uint16_t is_match[STATES][POS_STATES_MAX]; 62.1333 -+ 62.1334 -+ /* If 1, it's a repeated match. The distance is one of rep0 .. rep3. */ 62.1335 -+ uint16_t is_rep[STATES]; 62.1336 -+ 62.1337 -+ /* 62.1338 -+ * If 0, distance of a repeated match is rep0. 62.1339 -+ * Otherwise check is_rep1. 62.1340 -+ */ 62.1341 -+ uint16_t is_rep0[STATES]; 62.1342 -+ 62.1343 -+ /* 62.1344 -+ * If 0, distance of a repeated match is rep1. 62.1345 -+ * Otherwise check is_rep2. 62.1346 -+ */ 62.1347 -+ uint16_t is_rep1[STATES]; 62.1348 -+ 62.1349 -+ /* If 0, distance of a repeated match is rep2. Otherwise it is rep3. */ 62.1350 -+ uint16_t is_rep2[STATES]; 62.1351 -+ 62.1352 -+ /* 62.1353 -+ * If 1, the repeated match has length of one byte. Otherwise 62.1354 -+ * the length is decoded from rep_len_decoder. 62.1355 -+ */ 62.1356 -+ uint16_t is_rep0_long[STATES][POS_STATES_MAX]; 62.1357 -+ 62.1358 -+ /* 62.1359 -+ * Probability tree for the highest two bits of the match 62.1360 -+ * distance. There is a separate probability tree for match 62.1361 -+ * lengths of 2 (i.e. MATCH_LEN_MIN), 3, 4, and [5, 273]. 62.1362 -+ */ 62.1363 -+ uint16_t dist_slot[DIST_STATES][DIST_SLOTS]; 62.1364 -+ 62.1365 -+ /* 62.1366 -+ * Probility trees for additional bits for match distance 62.1367 -+ * when the distance is in the range [4, 127]. 62.1368 -+ */ 62.1369 -+ uint16_t dist_special[FULL_DISTANCES - DIST_MODEL_END]; 62.1370 -+ 62.1371 -+ /* 62.1372 -+ * Probability tree for the lowest four bits of a match 62.1373 -+ * distance that is equal to or greater than 128. 62.1374 -+ */ 62.1375 -+ uint16_t dist_align[ALIGN_SIZE]; 62.1376 -+ 62.1377 -+ /* Length of a normal match */ 62.1378 -+ struct lzma_len_dec match_len_dec; 62.1379 -+ 62.1380 -+ /* Length of a repeated match */ 62.1381 -+ struct lzma_len_dec rep_len_dec; 62.1382 -+ 62.1383 -+ /* Probabilities of literals */ 62.1384 -+ uint16_t literal[LITERAL_CODERS_MAX][LITERAL_CODER_SIZE]; 62.1385 -+}; 62.1386 -+ 62.1387 -+struct lzma2_dec { 62.1388 -+ /* Position in xz_dec_lzma2_run(). */ 62.1389 -+ enum lzma2_seq { 62.1390 -+ SEQ_CONTROL, 62.1391 -+ SEQ_UNCOMPRESSED_1, 62.1392 -+ SEQ_UNCOMPRESSED_2, 62.1393 -+ SEQ_COMPRESSED_0, 62.1394 -+ SEQ_COMPRESSED_1, 62.1395 -+ SEQ_PROPERTIES, 62.1396 -+ SEQ_LZMA_PREPARE, 62.1397 -+ SEQ_LZMA_RUN, 62.1398 -+ SEQ_COPY 62.1399 -+ } sequence; 62.1400 -+ 62.1401 -+ /* Next position after decoding the compressed size of the chunk. */ 62.1402 -+ enum lzma2_seq next_sequence; 62.1403 -+ 62.1404 -+ /* Uncompressed size of LZMA chunk (2 MiB at maximum) */ 62.1405 -+ uint32_t uncompressed; 62.1406 -+ 62.1407 -+ /* 62.1408 -+ * Compressed size of LZMA chunk or compressed/uncompressed 62.1409 -+ * size of uncompressed chunk (64 KiB at maximum) 62.1410 -+ */ 62.1411 -+ uint32_t compressed; 62.1412 -+ 62.1413 -+ /* 62.1414 -+ * True if dictionary reset is needed. This is false before 62.1415 -+ * the first chunk (LZMA or uncompressed). 62.1416 -+ */ 62.1417 -+ bool need_dict_reset; 62.1418 -+ 62.1419 -+ /* 62.1420 -+ * True if new LZMA properties are needed. This is false 62.1421 -+ * before the first LZMA chunk. 62.1422 -+ */ 62.1423 -+ bool need_props; 62.1424 -+}; 62.1425 -+ 62.1426 -+struct xz_dec_lzma2 { 62.1427 -+ /* 62.1428 -+ * The order below is important on x86 to reduce code size and 62.1429 -+ * it shouldn't hurt on other platforms. Everything up to and 62.1430 -+ * including lzma.pos_mask are in the first 128 bytes on x86-32, 62.1431 -+ * which allows using smaller instructions to access those 62.1432 -+ * variables. On x86-64, fewer variables fit into the first 128 62.1433 -+ * bytes, but this is still the best order without sacrificing 62.1434 -+ * the readability by splitting the structures. 62.1435 -+ */ 62.1436 -+ struct rc_dec rc; 62.1437 -+ struct dictionary dict; 62.1438 -+ struct lzma2_dec lzma2; 62.1439 -+ struct lzma_dec lzma; 62.1440 -+ 62.1441 -+ /* 62.1442 -+ * Temporary buffer which holds small number of input bytes between 62.1443 -+ * decoder calls. See lzma2_lzma() for details. 62.1444 -+ */ 62.1445 -+ struct { 62.1446 -+ uint32_t size; 62.1447 -+ uint8_t buf[3 * LZMA_IN_REQUIRED]; 62.1448 -+ } temp; 62.1449 -+}; 62.1450 -+ 62.1451 -+/************** 62.1452 -+ * Dictionary * 62.1453 -+ **************/ 62.1454 -+ 62.1455 -+/* 62.1456 -+ * Reset the dictionary state. When in single-call mode, set up the beginning 62.1457 -+ * of the dictionary to point to the actual output buffer. 62.1458 -+ */ 62.1459 -+static void dict_reset(struct dictionary *dict, struct xz_buf *b) 62.1460 -+{ 62.1461 -+ if (DEC_IS_SINGLE(dict->mode)) { 62.1462 -+ dict->buf = b->out + b->out_pos; 62.1463 -+ dict->end = b->out_size - b->out_pos; 62.1464 -+ } 62.1465 -+ 62.1466 -+ dict->start = 0; 62.1467 -+ dict->pos = 0; 62.1468 -+ dict->limit = 0; 62.1469 -+ dict->full = 0; 62.1470 -+} 62.1471 -+ 62.1472 -+/* Set dictionary write limit */ 62.1473 -+static void dict_limit(struct dictionary *dict, size_t out_max) 62.1474 -+{ 62.1475 -+ if (dict->end - dict->pos <= out_max) 62.1476 -+ dict->limit = dict->end; 62.1477 -+ else 62.1478 -+ dict->limit = dict->pos + out_max; 62.1479 -+} 62.1480 -+ 62.1481 -+/* Return true if at least one byte can be written into the dictionary. */ 62.1482 -+static inline bool dict_has_space(const struct dictionary *dict) 62.1483 -+{ 62.1484 -+ return dict->pos < dict->limit; 62.1485 -+} 62.1486 -+ 62.1487 -+/* 62.1488 -+ * Get a byte from the dictionary at the given distance. The distance is 62.1489 -+ * assumed to valid, or as a special case, zero when the dictionary is 62.1490 -+ * still empty. This special case is needed for single-call decoding to 62.1491 -+ * avoid writing a '\0' to the end of the destination buffer. 62.1492 -+ */ 62.1493 -+static inline uint32_t dict_get(const struct dictionary *dict, uint32_t dist) 62.1494 -+{ 62.1495 -+ size_t offset = dict->pos - dist - 1; 62.1496 -+ 62.1497 -+ if (dist >= dict->pos) 62.1498 -+ offset += dict->end; 62.1499 -+ 62.1500 -+ return dict->full > 0 ? dict->buf[offset] : 0; 62.1501 -+} 62.1502 -+ 62.1503 -+/* 62.1504 -+ * Put one byte into the dictionary. It is assumed that there is space for it. 62.1505 -+ */ 62.1506 -+static inline void dict_put(struct dictionary *dict, uint8_t byte) 62.1507 -+{ 62.1508 -+ dict->buf[dict->pos++] = byte; 62.1509 -+ 62.1510 -+ if (dict->full < dict->pos) 62.1511 -+ dict->full = dict->pos; 62.1512 -+} 62.1513 -+ 62.1514 -+/* 62.1515 -+ * Repeat given number of bytes from the given distance. If the distance is 62.1516 -+ * invalid, false is returned. On success, true is returned and *len is 62.1517 -+ * updated to indicate how many bytes were left to be repeated. 62.1518 -+ */ 62.1519 -+static bool dict_repeat(struct dictionary *dict, uint32_t *len, uint32_t dist) 62.1520 -+{ 62.1521 -+ size_t back; 62.1522 -+ uint32_t left; 62.1523 -+ 62.1524 -+ if (dist >= dict->full || dist >= dict->size) 62.1525 -+ return false; 62.1526 -+ 62.1527 -+ left = min_t(size_t, dict->limit - dict->pos, *len); 62.1528 -+ *len -= left; 62.1529 -+ 62.1530 -+ back = dict->pos - dist - 1; 62.1531 -+ if (dist >= dict->pos) 62.1532 -+ back += dict->end; 62.1533 -+ 62.1534 -+ do { 62.1535 -+ dict->buf[dict->pos++] = dict->buf[back++]; 62.1536 -+ if (back == dict->end) 62.1537 -+ back = 0; 62.1538 -+ } while (--left > 0); 62.1539 -+ 62.1540 -+ if (dict->full < dict->pos) 62.1541 -+ dict->full = dict->pos; 62.1542 -+ 62.1543 -+ return true; 62.1544 -+} 62.1545 -+ 62.1546 -+/* Copy uncompressed data as is from input to dictionary and output buffers. */ 62.1547 -+static void dict_uncompressed(struct dictionary *dict, struct xz_buf *b, 62.1548 -+ uint32_t *left) 62.1549 -+{ 62.1550 -+ size_t copy_size; 62.1551 -+ 62.1552 -+ while (*left > 0 && b->in_pos < b->in_size 62.1553 -+ && b->out_pos < b->out_size) { 62.1554 -+ copy_size = min(b->in_size - b->in_pos, 62.1555 -+ b->out_size - b->out_pos); 62.1556 -+ if (copy_size > dict->end - dict->pos) 62.1557 -+ copy_size = dict->end - dict->pos; 62.1558 -+ if (copy_size > *left) 62.1559 -+ copy_size = *left; 62.1560 -+ 62.1561 -+ *left -= copy_size; 62.1562 -+ 62.1563 -+ memcpy(dict->buf + dict->pos, b->in + b->in_pos, copy_size); 62.1564 -+ dict->pos += copy_size; 62.1565 -+ 62.1566 -+ if (dict->full < dict->pos) 62.1567 -+ dict->full = dict->pos; 62.1568 -+ 62.1569 -+ if (DEC_IS_MULTI(dict->mode)) { 62.1570 -+ if (dict->pos == dict->end) 62.1571 -+ dict->pos = 0; 62.1572 -+ 62.1573 -+ memcpy(b->out + b->out_pos, b->in + b->in_pos, 62.1574 -+ copy_size); 62.1575 -+ } 62.1576 -+ 62.1577 -+ dict->start = dict->pos; 62.1578 -+ 62.1579 -+ b->out_pos += copy_size; 62.1580 -+ b->in_pos += copy_size; 62.1581 -+ } 62.1582 -+} 62.1583 -+ 62.1584 -+/* 62.1585 -+ * Flush pending data from dictionary to b->out. It is assumed that there is 62.1586 -+ * enough space in b->out. This is guaranteed because caller uses dict_limit() 62.1587 -+ * before decoding data into the dictionary. 62.1588 -+ */ 62.1589 -+static uint32_t dict_flush(struct dictionary *dict, struct xz_buf *b) 62.1590 -+{ 62.1591 -+ size_t copy_size = dict->pos - dict->start; 62.1592 -+ 62.1593 -+ if (DEC_IS_MULTI(dict->mode)) { 62.1594 -+ if (dict->pos == dict->end) 62.1595 -+ dict->pos = 0; 62.1596 -+ 62.1597 -+ memcpy(b->out + b->out_pos, dict->buf + dict->start, 62.1598 -+ copy_size); 62.1599 -+ } 62.1600 -+ 62.1601 -+ dict->start = dict->pos; 62.1602 -+ b->out_pos += copy_size; 62.1603 -+ return copy_size; 62.1604 -+} 62.1605 -+ 62.1606 -+/***************** 62.1607 -+ * Range decoder * 62.1608 -+ *****************/ 62.1609 -+ 62.1610 -+/* Reset the range decoder. */ 62.1611 -+static void rc_reset(struct rc_dec *rc) 62.1612 -+{ 62.1613 -+ rc->range = (uint32_t)-1; 62.1614 -+ rc->code = 0; 62.1615 -+ rc->init_bytes_left = RC_INIT_BYTES; 62.1616 -+} 62.1617 -+ 62.1618 -+/* 62.1619 -+ * Read the first five initial bytes into rc->code if they haven't been 62.1620 -+ * read already. (Yes, the first byte gets completely ignored.) 62.1621 -+ */ 62.1622 -+static bool rc_read_init(struct rc_dec *rc, struct xz_buf *b) 62.1623 -+{ 62.1624 -+ while (rc->init_bytes_left > 0) { 62.1625 -+ if (b->in_pos == b->in_size) 62.1626 -+ return false; 62.1627 -+ 62.1628 -+ rc->code = (rc->code << 8) + b->in[b->in_pos++]; 62.1629 -+ --rc->init_bytes_left; 62.1630 -+ } 62.1631 -+ 62.1632 -+ return true; 62.1633 -+} 62.1634 -+ 62.1635 -+/* Return true if there may not be enough input for the next decoding loop. */ 62.1636 -+static inline bool rc_limit_exceeded(const struct rc_dec *rc) 62.1637 -+{ 62.1638 -+ return rc->in_pos > rc->in_limit; 62.1639 -+} 62.1640 -+ 62.1641 -+/* 62.1642 -+ * Return true if it is possible (from point of view of range decoder) that 62.1643 -+ * we have reached the end of the LZMA chunk. 62.1644 -+ */ 62.1645 -+static inline bool rc_is_finished(const struct rc_dec *rc) 62.1646 -+{ 62.1647 -+ return rc->code == 0; 62.1648 -+} 62.1649 -+ 62.1650 -+/* Read the next input byte if needed. */ 62.1651 -+static __always_inline void rc_normalize(struct rc_dec *rc) 62.1652 -+{ 62.1653 -+ if (rc->range < RC_TOP_VALUE) { 62.1654 -+ rc->range <<= RC_SHIFT_BITS; 62.1655 -+ rc->code = (rc->code << RC_SHIFT_BITS) + rc->in[rc->in_pos++]; 62.1656 -+ } 62.1657 -+} 62.1658 -+ 62.1659 -+/* 62.1660 -+ * Decode one bit. In some versions, this function has been splitted in three 62.1661 -+ * functions so that the compiler is supposed to be able to more easily avoid 62.1662 -+ * an extra branch. In this particular version of the LZMA decoder, this 62.1663 -+ * doesn't seem to be a good idea (tested with GCC 3.3.6, 3.4.6, and 4.3.3 62.1664 -+ * on x86). Using a non-splitted version results in nicer looking code too. 62.1665 -+ * 62.1666 -+ * NOTE: This must return an int. Do not make it return a bool or the speed 62.1667 -+ * of the code generated by GCC 3.x decreases 10-15 %. (GCC 4.3 doesn't care, 62.1668 -+ * and it generates 10-20 % faster code than GCC 3.x from this file anyway.) 62.1669 -+ */ 62.1670 -+static __always_inline int rc_bit(struct rc_dec *rc, uint16_t *prob) 62.1671 -+{ 62.1672 -+ uint32_t bound; 62.1673 -+ int bit; 62.1674 -+ 62.1675 -+ rc_normalize(rc); 62.1676 -+ bound = (rc->range >> RC_BIT_MODEL_TOTAL_BITS) * *prob; 62.1677 -+ if (rc->code < bound) { 62.1678 -+ rc->range = bound; 62.1679 -+ *prob += (RC_BIT_MODEL_TOTAL - *prob) >> RC_MOVE_BITS; 62.1680 -+ bit = 0; 62.1681 -+ } else { 62.1682 -+ rc->range -= bound; 62.1683 -+ rc->code -= bound; 62.1684 -+ *prob -= *prob >> RC_MOVE_BITS; 62.1685 -+ bit = 1; 62.1686 -+ } 62.1687 -+ 62.1688 -+ return bit; 62.1689 -+} 62.1690 -+ 62.1691 -+/* Decode a bittree starting from the most significant bit. */ 62.1692 -+static __always_inline uint32_t rc_bittree(struct rc_dec *rc, 62.1693 -+ uint16_t *probs, uint32_t limit) 62.1694 -+{ 62.1695 -+ uint32_t symbol = 1; 62.1696 -+ 62.1697 -+ do { 62.1698 -+ if (rc_bit(rc, &probs[symbol])) 62.1699 -+ symbol = (symbol << 1) + 1; 62.1700 -+ else 62.1701 -+ symbol <<= 1; 62.1702 -+ } while (symbol < limit); 62.1703 -+ 62.1704 -+ return symbol; 62.1705 -+} 62.1706 -+ 62.1707 -+/* Decode a bittree starting from the least significant bit. */ 62.1708 -+static __always_inline void rc_bittree_reverse(struct rc_dec *rc, 62.1709 -+ uint16_t *probs, 62.1710 -+ uint32_t *dest, uint32_t limit) 62.1711 -+{ 62.1712 -+ uint32_t symbol = 1; 62.1713 -+ uint32_t i = 0; 62.1714 -+ 62.1715 -+ do { 62.1716 -+ if (rc_bit(rc, &probs[symbol])) { 62.1717 -+ symbol = (symbol << 1) + 1; 62.1718 -+ *dest += 1 << i; 62.1719 -+ } else { 62.1720 -+ symbol <<= 1; 62.1721 -+ } 62.1722 -+ } while (++i < limit); 62.1723 -+} 62.1724 -+ 62.1725 -+/* Decode direct bits (fixed fifty-fifty probability) */ 62.1726 -+static inline void rc_direct(struct rc_dec *rc, uint32_t *dest, uint32_t limit) 62.1727 -+{ 62.1728 -+ uint32_t mask; 62.1729 -+ 62.1730 -+ do { 62.1731 -+ rc_normalize(rc); 62.1732 -+ rc->range >>= 1; 62.1733 -+ rc->code -= rc->range; 62.1734 -+ mask = (uint32_t)0 - (rc->code >> 31); 62.1735 -+ rc->code += rc->range & mask; 62.1736 -+ *dest = (*dest << 1) + (mask + 1); 62.1737 -+ } while (--limit > 0); 62.1738 -+} 62.1739 -+ 62.1740 -+/******** 62.1741 -+ * LZMA * 62.1742 -+ ********/ 62.1743 -+ 62.1744 -+/* Get pointer to literal coder probability array. */ 62.1745 -+static uint16_t *lzma_literal_probs(struct xz_dec_lzma2 *s) 62.1746 -+{ 62.1747 -+ uint32_t prev_byte = dict_get(&s->dict, 0); 62.1748 -+ uint32_t low = prev_byte >> (8 - s->lzma.lc); 62.1749 -+ uint32_t high = (s->dict.pos & s->lzma.literal_pos_mask) << s->lzma.lc; 62.1750 -+ return s->lzma.literal[low + high]; 62.1751 -+} 62.1752 -+ 62.1753 -+/* Decode a literal (one 8-bit byte) */ 62.1754 -+static void lzma_literal(struct xz_dec_lzma2 *s) 62.1755 -+{ 62.1756 -+ uint16_t *probs; 62.1757 -+ uint32_t symbol; 62.1758 -+ uint32_t match_byte; 62.1759 -+ uint32_t match_bit; 62.1760 -+ uint32_t offset; 62.1761 -+ uint32_t i; 62.1762 -+ 62.1763 -+ probs = lzma_literal_probs(s); 62.1764 -+ 62.1765 -+ if (lzma_state_is_literal(s->lzma.state)) { 62.1766 -+ symbol = rc_bittree(&s->rc, probs, 0x100); 62.1767 -+ } else { 62.1768 -+ symbol = 1; 62.1769 -+ match_byte = dict_get(&s->dict, s->lzma.rep0) << 1; 62.1770 -+ offset = 0x100; 62.1771 -+ 62.1772 -+ do { 62.1773 -+ match_bit = match_byte & offset; 62.1774 -+ match_byte <<= 1; 62.1775 -+ i = offset + match_bit + symbol; 62.1776 -+ 62.1777 -+ if (rc_bit(&s->rc, &probs[i])) { 62.1778 -+ symbol = (symbol << 1) + 1; 62.1779 -+ offset &= match_bit; 62.1780 -+ } else { 62.1781 -+ symbol <<= 1; 62.1782 -+ offset &= ~match_bit; 62.1783 -+ } 62.1784 -+ } while (symbol < 0x100); 62.1785 -+ } 62.1786 -+ 62.1787 -+ dict_put(&s->dict, (uint8_t)symbol); 62.1788 -+ lzma_state_literal(&s->lzma.state); 62.1789 -+} 62.1790 -+ 62.1791 -+/* Decode the length of the match into s->lzma.len. */ 62.1792 -+static void lzma_len(struct xz_dec_lzma2 *s, struct lzma_len_dec *l, 62.1793 -+ uint32_t pos_state) 62.1794 -+{ 62.1795 -+ uint16_t *probs; 62.1796 -+ uint32_t limit; 62.1797 -+ 62.1798 -+ if (!rc_bit(&s->rc, &l->choice)) { 62.1799 -+ probs = l->low[pos_state]; 62.1800 -+ limit = LEN_LOW_SYMBOLS; 62.1801 -+ s->lzma.len = MATCH_LEN_MIN; 62.1802 -+ } else { 62.1803 -+ if (!rc_bit(&s->rc, &l->choice2)) { 62.1804 -+ probs = l->mid[pos_state]; 62.1805 -+ limit = LEN_MID_SYMBOLS; 62.1806 -+ s->lzma.len = MATCH_LEN_MIN + LEN_LOW_SYMBOLS; 62.1807 -+ } else { 62.1808 -+ probs = l->high; 62.1809 -+ limit = LEN_HIGH_SYMBOLS; 62.1810 -+ s->lzma.len = MATCH_LEN_MIN + LEN_LOW_SYMBOLS 62.1811 -+ + LEN_MID_SYMBOLS; 62.1812 -+ } 62.1813 -+ } 62.1814 -+ 62.1815 -+ s->lzma.len += rc_bittree(&s->rc, probs, limit) - limit; 62.1816 -+} 62.1817 -+ 62.1818 -+/* Decode a match. The distance will be stored in s->lzma.rep0. */ 62.1819 -+static void lzma_match(struct xz_dec_lzma2 *s, uint32_t pos_state) 62.1820 -+{ 62.1821 -+ uint16_t *probs; 62.1822 -+ uint32_t dist_slot; 62.1823 -+ uint32_t limit; 62.1824 -+ 62.1825 -+ lzma_state_match(&s->lzma.state); 62.1826 -+ 62.1827 -+ s->lzma.rep3 = s->lzma.rep2; 62.1828 -+ s->lzma.rep2 = s->lzma.rep1; 62.1829 -+ s->lzma.rep1 = s->lzma.rep0; 62.1830 -+ 62.1831 -+ lzma_len(s, &s->lzma.match_len_dec, pos_state); 62.1832 -+ 62.1833 -+ probs = s->lzma.dist_slot[lzma_get_dist_state(s->lzma.len)]; 62.1834 -+ dist_slot = rc_bittree(&s->rc, probs, DIST_SLOTS) - DIST_SLOTS; 62.1835 -+ 62.1836 -+ if (dist_slot < DIST_MODEL_START) { 62.1837 -+ s->lzma.rep0 = dist_slot; 62.1838 -+ } else { 62.1839 -+ limit = (dist_slot >> 1) - 1; 62.1840 -+ s->lzma.rep0 = 2 + (dist_slot & 1); 62.1841 -+ 62.1842 -+ if (dist_slot < DIST_MODEL_END) { 62.1843 -+ s->lzma.rep0 <<= limit; 62.1844 -+ probs = s->lzma.dist_special + s->lzma.rep0 62.1845 -+ - dist_slot - 1; 62.1846 -+ rc_bittree_reverse(&s->rc, probs, 62.1847 -+ &s->lzma.rep0, limit); 62.1848 -+ } else { 62.1849 -+ rc_direct(&s->rc, &s->lzma.rep0, limit - ALIGN_BITS); 62.1850 -+ s->lzma.rep0 <<= ALIGN_BITS; 62.1851 -+ rc_bittree_reverse(&s->rc, s->lzma.dist_align, 62.1852 -+ &s->lzma.rep0, ALIGN_BITS); 62.1853 -+ } 62.1854 -+ } 62.1855 -+} 62.1856 -+ 62.1857 -+/* 62.1858 -+ * Decode a repeated match. The distance is one of the four most recently 62.1859 -+ * seen matches. The distance will be stored in s->lzma.rep0. 62.1860 -+ */ 62.1861 -+static void lzma_rep_match(struct xz_dec_lzma2 *s, uint32_t pos_state) 62.1862 -+{ 62.1863 -+ uint32_t tmp; 62.1864 -+ 62.1865 -+ if (!rc_bit(&s->rc, &s->lzma.is_rep0[s->lzma.state])) { 62.1866 -+ if (!rc_bit(&s->rc, &s->lzma.is_rep0_long[ 62.1867 -+ s->lzma.state][pos_state])) { 62.1868 -+ lzma_state_short_rep(&s->lzma.state); 62.1869 -+ s->lzma.len = 1; 62.1870 -+ return; 62.1871 -+ } 62.1872 -+ } else { 62.1873 -+ if (!rc_bit(&s->rc, &s->lzma.is_rep1[s->lzma.state])) { 62.1874 -+ tmp = s->lzma.rep1; 62.1875 -+ } else { 62.1876 -+ if (!rc_bit(&s->rc, &s->lzma.is_rep2[s->lzma.state])) { 62.1877 -+ tmp = s->lzma.rep2; 62.1878 -+ } else { 62.1879 -+ tmp = s->lzma.rep3; 62.1880 -+ s->lzma.rep3 = s->lzma.rep2; 62.1881 -+ } 62.1882 -+ 62.1883 -+ s->lzma.rep2 = s->lzma.rep1; 62.1884 -+ } 62.1885 -+ 62.1886 -+ s->lzma.rep1 = s->lzma.rep0; 62.1887 -+ s->lzma.rep0 = tmp; 62.1888 -+ } 62.1889 -+ 62.1890 -+ lzma_state_long_rep(&s->lzma.state); 62.1891 -+ lzma_len(s, &s->lzma.rep_len_dec, pos_state); 62.1892 -+} 62.1893 -+ 62.1894 -+/* LZMA decoder core */ 62.1895 -+static bool lzma_main(struct xz_dec_lzma2 *s) 62.1896 -+{ 62.1897 -+ uint32_t pos_state; 62.1898 -+ 62.1899 -+ /* 62.1900 -+ * If the dictionary was reached during the previous call, try to 62.1901 -+ * finish the possibly pending repeat in the dictionary. 62.1902 -+ */ 62.1903 -+ if (dict_has_space(&s->dict) && s->lzma.len > 0) 62.1904 -+ dict_repeat(&s->dict, &s->lzma.len, s->lzma.rep0); 62.1905 -+ 62.1906 -+ /* 62.1907 -+ * Decode more LZMA symbols. One iteration may consume up to 62.1908 -+ * LZMA_IN_REQUIRED - 1 bytes. 62.1909 -+ */ 62.1910 -+ while (dict_has_space(&s->dict) && !rc_limit_exceeded(&s->rc)) { 62.1911 -+ pos_state = s->dict.pos & s->lzma.pos_mask; 62.1912 -+ 62.1913 -+ if (!rc_bit(&s->rc, &s->lzma.is_match[ 62.1914 -+ s->lzma.state][pos_state])) { 62.1915 -+ lzma_literal(s); 62.1916 -+ } else { 62.1917 -+ if (rc_bit(&s->rc, &s->lzma.is_rep[s->lzma.state])) 62.1918 -+ lzma_rep_match(s, pos_state); 62.1919 -+ else 62.1920 -+ lzma_match(s, pos_state); 62.1921 -+ 62.1922 -+ if (!dict_repeat(&s->dict, &s->lzma.len, s->lzma.rep0)) 62.1923 -+ return false; 62.1924 -+ } 62.1925 -+ } 62.1926 -+ 62.1927 -+ /* 62.1928 -+ * Having the range decoder always normalized when we are outside 62.1929 -+ * this function makes it easier to correctly handle end of the chunk. 62.1930 -+ */ 62.1931 -+ rc_normalize(&s->rc); 62.1932 -+ 62.1933 -+ return true; 62.1934 -+} 62.1935 -+ 62.1936 -+/* 62.1937 -+ * Reset the LZMA decoder and range decoder state. Dictionary is nore reset 62.1938 -+ * here, because LZMA state may be reset without resetting the dictionary. 62.1939 -+ */ 62.1940 -+static void lzma_reset(struct xz_dec_lzma2 *s) 62.1941 -+{ 62.1942 -+ uint16_t *probs; 62.1943 -+ size_t i; 62.1944 -+ 62.1945 -+ s->lzma.state = STATE_LIT_LIT; 62.1946 -+ s->lzma.rep0 = 0; 62.1947 -+ s->lzma.rep1 = 0; 62.1948 -+ s->lzma.rep2 = 0; 62.1949 -+ s->lzma.rep3 = 0; 62.1950 -+ 62.1951 -+ /* 62.1952 -+ * All probabilities are initialized to the same value. This hack 62.1953 -+ * makes the code smaller by avoiding a separate loop for each 62.1954 -+ * probability array. 62.1955 -+ * 62.1956 -+ * This could be optimized so that only that part of literal 62.1957 -+ * probabilities that are actually required. In the common case 62.1958 -+ * we would write 12 KiB less. 62.1959 -+ */ 62.1960 -+ probs = s->lzma.is_match[0]; 62.1961 -+ for (i = 0; i < PROBS_TOTAL; ++i) 62.1962 -+ probs[i] = RC_BIT_MODEL_TOTAL / 2; 62.1963 -+ 62.1964 -+ rc_reset(&s->rc); 62.1965 -+} 62.1966 -+ 62.1967 -+/* 62.1968 -+ * Decode and validate LZMA properties (lc/lp/pb) and calculate the bit masks 62.1969 -+ * from the decoded lp and pb values. On success, the LZMA decoder state is 62.1970 -+ * reset and true is returned. 62.1971 -+ */ 62.1972 -+static bool lzma_props(struct xz_dec_lzma2 *s, uint8_t props) 62.1973 -+{ 62.1974 -+ if (props > (4 * 5 + 4) * 9 + 8) 62.1975 -+ return false; 62.1976 -+ 62.1977 -+ s->lzma.pos_mask = 0; 62.1978 -+ while (props >= 9 * 5) { 62.1979 -+ props -= 9 * 5; 62.1980 -+ ++s->lzma.pos_mask; 62.1981 -+ } 62.1982 -+ 62.1983 -+ s->lzma.pos_mask = (1 << s->lzma.pos_mask) - 1; 62.1984 -+ 62.1985 -+ s->lzma.literal_pos_mask = 0; 62.1986 -+ while (props >= 9) { 62.1987 -+ props -= 9; 62.1988 -+ ++s->lzma.literal_pos_mask; 62.1989 -+ } 62.1990 -+ 62.1991 -+ s->lzma.lc = props; 62.1992 -+ 62.1993 -+ if (s->lzma.lc + s->lzma.literal_pos_mask > 4) 62.1994 -+ return false; 62.1995 -+ 62.1996 -+ s->lzma.literal_pos_mask = (1 << s->lzma.literal_pos_mask) - 1; 62.1997 -+ 62.1998 -+ lzma_reset(s); 62.1999 -+ 62.2000 -+ return true; 62.2001 -+} 62.2002 -+ 62.2003 -+/********* 62.2004 -+ * LZMA2 * 62.2005 -+ *********/ 62.2006 -+ 62.2007 -+/* 62.2008 -+ * The LZMA decoder assumes that if the input limit (s->rc.in_limit) hasn't 62.2009 -+ * been exceeded, it is safe to read up to LZMA_IN_REQUIRED bytes. This 62.2010 -+ * wrapper function takes care of making the LZMA decoder's assumption safe. 62.2011 -+ * 62.2012 -+ * As long as there is plenty of input left to be decoded in the current LZMA 62.2013 -+ * chunk, we decode directly from the caller-supplied input buffer until 62.2014 -+ * there's LZMA_IN_REQUIRED bytes left. Those remaining bytes are copied into 62.2015 -+ * s->temp.buf, which (hopefully) gets filled on the next call to this 62.2016 -+ * function. We decode a few bytes from the temporary buffer so that we can 62.2017 -+ * continue decoding from the caller-supplied input buffer again. 62.2018 -+ */ 62.2019 -+static bool lzma2_lzma(struct xz_dec_lzma2 *s, struct xz_buf *b) 62.2020 -+{ 62.2021 -+ size_t in_avail; 62.2022 -+ uint32_t tmp; 62.2023 -+ 62.2024 -+ in_avail = b->in_size - b->in_pos; 62.2025 -+ if (s->temp.size > 0 || s->lzma2.compressed == 0) { 62.2026 -+ tmp = 2 * LZMA_IN_REQUIRED - s->temp.size; 62.2027 -+ if (tmp > s->lzma2.compressed - s->temp.size) 62.2028 -+ tmp = s->lzma2.compressed - s->temp.size; 62.2029 -+ if (tmp > in_avail) 62.2030 -+ tmp = in_avail; 62.2031 -+ 62.2032 -+ memcpy(s->temp.buf + s->temp.size, b->in + b->in_pos, tmp); 62.2033 -+ 62.2034 -+ if (s->temp.size + tmp == s->lzma2.compressed) { 62.2035 -+ memzero(s->temp.buf + s->temp.size + tmp, 62.2036 -+ sizeof(s->temp.buf) 62.2037 -+ - s->temp.size - tmp); 62.2038 -+ s->rc.in_limit = s->temp.size + tmp; 62.2039 -+ } else if (s->temp.size + tmp < LZMA_IN_REQUIRED) { 62.2040 -+ s->temp.size += tmp; 62.2041 -+ b->in_pos += tmp; 62.2042 -+ return true; 62.2043 -+ } else { 62.2044 -+ s->rc.in_limit = s->temp.size + tmp - LZMA_IN_REQUIRED; 62.2045 -+ } 62.2046 -+ 62.2047 -+ s->rc.in = s->temp.buf; 62.2048 -+ s->rc.in_pos = 0; 62.2049 -+ 62.2050 -+ if (!lzma_main(s) || s->rc.in_pos > s->temp.size + tmp) 62.2051 -+ return false; 62.2052 -+ 62.2053 -+ s->lzma2.compressed -= s->rc.in_pos; 62.2054 -+ 62.2055 -+ if (s->rc.in_pos < s->temp.size) { 62.2056 -+ s->temp.size -= s->rc.in_pos; 62.2057 -+ memmove(s->temp.buf, s->temp.buf + s->rc.in_pos, 62.2058 -+ s->temp.size); 62.2059 -+ return true; 62.2060 -+ } 62.2061 -+ 62.2062 -+ b->in_pos += s->rc.in_pos - s->temp.size; 62.2063 -+ s->temp.size = 0; 62.2064 -+ } 62.2065 -+ 62.2066 -+ in_avail = b->in_size - b->in_pos; 62.2067 -+ if (in_avail >= LZMA_IN_REQUIRED) { 62.2068 -+ s->rc.in = b->in; 62.2069 -+ s->rc.in_pos = b->in_pos; 62.2070 -+ 62.2071 -+ if (in_avail >= s->lzma2.compressed + LZMA_IN_REQUIRED) 62.2072 -+ s->rc.in_limit = b->in_pos + s->lzma2.compressed; 62.2073 -+ else 62.2074 -+ s->rc.in_limit = b->in_size - LZMA_IN_REQUIRED; 62.2075 -+ 62.2076 -+ if (!lzma_main(s)) 62.2077 -+ return false; 62.2078 -+ 62.2079 -+ in_avail = s->rc.in_pos - b->in_pos; 62.2080 -+ if (in_avail > s->lzma2.compressed) 62.2081 -+ return false; 62.2082 -+ 62.2083 -+ s->lzma2.compressed -= in_avail; 62.2084 -+ b->in_pos = s->rc.in_pos; 62.2085 -+ } 62.2086 -+ 62.2087 -+ in_avail = b->in_size - b->in_pos; 62.2088 -+ if (in_avail < LZMA_IN_REQUIRED) { 62.2089 -+ if (in_avail > s->lzma2.compressed) 62.2090 -+ in_avail = s->lzma2.compressed; 62.2091 -+ 62.2092 -+ memcpy(s->temp.buf, b->in + b->in_pos, in_avail); 62.2093 -+ s->temp.size = in_avail; 62.2094 -+ b->in_pos += in_avail; 62.2095 -+ } 62.2096 -+ 62.2097 -+ return true; 62.2098 -+} 62.2099 -+ 62.2100 -+/* 62.2101 -+ * Take care of the LZMA2 control layer, and forward the job of actual LZMA 62.2102 -+ * decoding or copying of uncompressed chunks to other functions. 62.2103 -+ */ 62.2104 -+XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2 *s, 62.2105 -+ struct xz_buf *b) 62.2106 -+{ 62.2107 -+ uint32_t tmp; 62.2108 -+ 62.2109 -+ while (b->in_pos < b->in_size || s->lzma2.sequence == SEQ_LZMA_RUN) { 62.2110 -+ switch (s->lzma2.sequence) { 62.2111 -+ case SEQ_CONTROL: 62.2112 -+ /* 62.2113 -+ * LZMA2 control byte 62.2114 -+ * 62.2115 -+ * Exact values: 62.2116 -+ * 0x00 End marker 62.2117 -+ * 0x01 Dictionary reset followed by 62.2118 -+ * an uncompressed chunk 62.2119 -+ * 0x02 Uncompressed chunk (no dictionary reset) 62.2120 -+ * 62.2121 -+ * Highest three bits (s->control & 0xE0): 62.2122 -+ * 0xE0 Dictionary reset, new properties and state 62.2123 -+ * reset, followed by LZMA compressed chunk 62.2124 -+ * 0xC0 New properties and state reset, followed 62.2125 -+ * by LZMA compressed chunk (no dictionary 62.2126 -+ * reset) 62.2127 -+ * 0xA0 State reset using old properties, 62.2128 -+ * followed by LZMA compressed chunk (no 62.2129 -+ * dictionary reset) 62.2130 -+ * 0x80 LZMA chunk (no dictionary or state reset) 62.2131 -+ * 62.2132 -+ * For LZMA compressed chunks, the lowest five bits 62.2133 -+ * (s->control & 1F) are the highest bits of the 62.2134 -+ * uncompressed size (bits 16-20). 62.2135 -+ * 62.2136 -+ * A new LZMA2 stream must begin with a dictionary 62.2137 -+ * reset. The first LZMA chunk must set new 62.2138 -+ * properties and reset the LZMA state. 62.2139 -+ * 62.2140 -+ * Values that don't match anything described above 62.2141 -+ * are invalid and we return XZ_DATA_ERROR. 62.2142 -+ */ 62.2143 -+ tmp = b->in[b->in_pos++]; 62.2144 -+ 62.2145 -+ if (tmp >= 0xE0 || tmp == 0x01) { 62.2146 -+ s->lzma2.need_props = true; 62.2147 -+ s->lzma2.need_dict_reset = false; 62.2148 -+ dict_reset(&s->dict, b); 62.2149 -+ } else if (s->lzma2.need_dict_reset) { 62.2150 -+ return XZ_DATA_ERROR; 62.2151 -+ } 62.2152 -+ 62.2153 -+ if (tmp >= 0x80) { 62.2154 -+ s->lzma2.uncompressed = (tmp & 0x1F) << 16; 62.2155 -+ s->lzma2.sequence = SEQ_UNCOMPRESSED_1; 62.2156 -+ 62.2157 -+ if (tmp >= 0xC0) { 62.2158 -+ /* 62.2159 -+ * When there are new properties, 62.2160 -+ * state reset is done at 62.2161 -+ * SEQ_PROPERTIES. 62.2162 -+ */ 62.2163 -+ s->lzma2.need_props = false; 62.2164 -+ s->lzma2.next_sequence 62.2165 -+ = SEQ_PROPERTIES; 62.2166 -+ 62.2167 -+ } else if (s->lzma2.need_props) { 62.2168 -+ return XZ_DATA_ERROR; 62.2169 -+ 62.2170 -+ } else { 62.2171 -+ s->lzma2.next_sequence 62.2172 -+ = SEQ_LZMA_PREPARE; 62.2173 -+ if (tmp >= 0xA0) 62.2174 -+ lzma_reset(s); 62.2175 -+ } 62.2176 -+ } else { 62.2177 -+ if (tmp == 0x00) 62.2178 -+ return XZ_STREAM_END; 62.2179 -+ 62.2180 -+ if (tmp > 0x02) 62.2181 -+ return XZ_DATA_ERROR; 62.2182 -+ 62.2183 -+ s->lzma2.sequence = SEQ_COMPRESSED_0; 62.2184 -+ s->lzma2.next_sequence = SEQ_COPY; 62.2185 -+ } 62.2186 -+ 62.2187 -+ break; 62.2188 -+ 62.2189 -+ case SEQ_UNCOMPRESSED_1: 62.2190 -+ s->lzma2.uncompressed 62.2191 -+ += (uint32_t)b->in[b->in_pos++] << 8; 62.2192 -+ s->lzma2.sequence = SEQ_UNCOMPRESSED_2; 62.2193 -+ break; 62.2194 -+ 62.2195 -+ case SEQ_UNCOMPRESSED_2: 62.2196 -+ s->lzma2.uncompressed 62.2197 -+ += (uint32_t)b->in[b->in_pos++] + 1; 62.2198 -+ s->lzma2.sequence = SEQ_COMPRESSED_0; 62.2199 -+ break; 62.2200 -+ 62.2201 -+ case SEQ_COMPRESSED_0: 62.2202 -+ s->lzma2.compressed 62.2203 -+ = (uint32_t)b->in[b->in_pos++] << 8; 62.2204 -+ s->lzma2.sequence = SEQ_COMPRESSED_1; 62.2205 -+ break; 62.2206 -+ 62.2207 -+ case SEQ_COMPRESSED_1: 62.2208 -+ s->lzma2.compressed 62.2209 -+ += (uint32_t)b->in[b->in_pos++] + 1; 62.2210 -+ s->lzma2.sequence = s->lzma2.next_sequence; 62.2211 -+ break; 62.2212 -+ 62.2213 -+ case SEQ_PROPERTIES: 62.2214 -+ if (!lzma_props(s, b->in[b->in_pos++])) 62.2215 -+ return XZ_DATA_ERROR; 62.2216 -+ 62.2217 -+ s->lzma2.sequence = SEQ_LZMA_PREPARE; 62.2218 -+ 62.2219 -+ case SEQ_LZMA_PREPARE: 62.2220 -+ if (s->lzma2.compressed < RC_INIT_BYTES) 62.2221 -+ return XZ_DATA_ERROR; 62.2222 -+ 62.2223 -+ if (!rc_read_init(&s->rc, b)) 62.2224 -+ return XZ_OK; 62.2225 -+ 62.2226 -+ s->lzma2.compressed -= RC_INIT_BYTES; 62.2227 -+ s->lzma2.sequence = SEQ_LZMA_RUN; 62.2228 -+ 62.2229 -+ case SEQ_LZMA_RUN: 62.2230 -+ /* 62.2231 -+ * Set dictionary limit to indicate how much we want 62.2232 -+ * to be encoded at maximum. Decode new data into the 62.2233 -+ * dictionary. Flush the new data from dictionary to 62.2234 -+ * b->out. Check if we finished decoding this chunk. 62.2235 -+ * In case the dictionary got full but we didn't fill 62.2236 -+ * the output buffer yet, we may run this loop 62.2237 -+ * multiple times without changing s->lzma2.sequence. 62.2238 -+ */ 62.2239 -+ dict_limit(&s->dict, min_t(size_t, 62.2240 -+ b->out_size - b->out_pos, 62.2241 -+ s->lzma2.uncompressed)); 62.2242 -+ if (!lzma2_lzma(s, b)) 62.2243 -+ return XZ_DATA_ERROR; 62.2244 -+ 62.2245 -+ s->lzma2.uncompressed -= dict_flush(&s->dict, b); 62.2246 -+ 62.2247 -+ if (s->lzma2.uncompressed == 0) { 62.2248 -+ if (s->lzma2.compressed > 0 || s->lzma.len > 0 62.2249 -+ || !rc_is_finished(&s->rc)) 62.2250 -+ return XZ_DATA_ERROR; 62.2251 -+ 62.2252 -+ rc_reset(&s->rc); 62.2253 -+ s->lzma2.sequence = SEQ_CONTROL; 62.2254 -+ 62.2255 -+ } else if (b->out_pos == b->out_size 62.2256 -+ || (b->in_pos == b->in_size 62.2257 -+ && s->temp.size 62.2258 -+ < s->lzma2.compressed)) { 62.2259 -+ return XZ_OK; 62.2260 -+ } 62.2261 -+ 62.2262 -+ break; 62.2263 -+ 62.2264 -+ case SEQ_COPY: 62.2265 -+ dict_uncompressed(&s->dict, b, &s->lzma2.compressed); 62.2266 -+ if (s->lzma2.compressed > 0) 62.2267 -+ return XZ_OK; 62.2268 -+ 62.2269 -+ s->lzma2.sequence = SEQ_CONTROL; 62.2270 -+ break; 62.2271 -+ } 62.2272 -+ } 62.2273 -+ 62.2274 -+ return XZ_OK; 62.2275 -+} 62.2276 -+ 62.2277 -+XZ_EXTERN struct xz_dec_lzma2 *xz_dec_lzma2_create(enum xz_mode mode, 62.2278 -+ uint32_t dict_max) 62.2279 -+{ 62.2280 -+ struct xz_dec_lzma2 *s = kmalloc(sizeof(*s), GFP_KERNEL); 62.2281 -+ if (s == NULL) 62.2282 -+ return NULL; 62.2283 -+ 62.2284 -+ s->dict.mode = mode; 62.2285 -+ s->dict.size_max = dict_max; 62.2286 -+ 62.2287 -+ if (DEC_IS_PREALLOC(mode)) { 62.2288 -+ s->dict.buf = vmalloc(dict_max); 62.2289 -+ if (s->dict.buf == NULL) { 62.2290 -+ kfree(s); 62.2291 -+ return NULL; 62.2292 -+ } 62.2293 -+ } else if (DEC_IS_DYNALLOC(mode)) { 62.2294 -+ s->dict.buf = NULL; 62.2295 -+ s->dict.allocated = 0; 62.2296 -+ } 62.2297 -+ 62.2298 -+ return s; 62.2299 -+} 62.2300 -+ 62.2301 -+XZ_EXTERN enum xz_ret xz_dec_lzma2_reset(struct xz_dec_lzma2 *s, uint8_t props) 62.2302 -+{ 62.2303 -+ /* This limits dictionary size to 3 GiB to keep parsing simpler. */ 62.2304 -+ if (props > 39) 62.2305 -+ return XZ_OPTIONS_ERROR; 62.2306 -+ 62.2307 -+ s->dict.size = 2 + (props & 1); 62.2308 -+ s->dict.size <<= (props >> 1) + 11; 62.2309 -+ 62.2310 -+ if (DEC_IS_MULTI(s->dict.mode)) { 62.2311 -+ if (s->dict.size > s->dict.size_max) 62.2312 -+ return XZ_MEMLIMIT_ERROR; 62.2313 -+ 62.2314 -+ s->dict.end = s->dict.size; 62.2315 -+ 62.2316 -+ if (DEC_IS_DYNALLOC(s->dict.mode)) { 62.2317 -+ if (s->dict.allocated < s->dict.size) { 62.2318 -+ vfree(s->dict.buf); 62.2319 -+ s->dict.buf = vmalloc(s->dict.size); 62.2320 -+ if (s->dict.buf == NULL) { 62.2321 -+ s->dict.allocated = 0; 62.2322 -+ return XZ_MEM_ERROR; 62.2323 -+ } 62.2324 -+ } 62.2325 -+ } 62.2326 -+ } 62.2327 -+ 62.2328 -+ s->lzma.len = 0; 62.2329 -+ 62.2330 -+ s->lzma2.sequence = SEQ_CONTROL; 62.2331 -+ s->lzma2.need_dict_reset = true; 62.2332 -+ 62.2333 -+ s->temp.size = 0; 62.2334 -+ 62.2335 -+ return XZ_OK; 62.2336 -+} 62.2337 -+ 62.2338 -+XZ_EXTERN void xz_dec_lzma2_end(struct xz_dec_lzma2 *s) 62.2339 -+{ 62.2340 -+ if (DEC_IS_MULTI(s->dict.mode)) 62.2341 -+ vfree(s->dict.buf); 62.2342 -+ 62.2343 -+ kfree(s); 62.2344 -+} 62.2345 -diff --git a/lib/xz/xz_dec_stream.c b/lib/xz/xz_dec_stream.c 62.2346 -new file mode 100644 62.2347 -index 0000000..ac809b1 62.2348 ---- /dev/null 62.2349 -+++ b/lib/xz/xz_dec_stream.c 62.2350 -@@ -0,0 +1,821 @@ 62.2351 -+/* 62.2352 -+ * .xz Stream decoder 62.2353 -+ * 62.2354 -+ * Author: Lasse Collin <lasse.collin@tukaani.org> 62.2355 -+ * 62.2356 -+ * This file has been put into the public domain. 62.2357 -+ * You can do whatever you want with this file. 62.2358 -+ */ 62.2359 -+ 62.2360 -+#include "xz_private.h" 62.2361 -+#include "xz_stream.h" 62.2362 -+ 62.2363 -+/* Hash used to validate the Index field */ 62.2364 -+struct xz_dec_hash { 62.2365 -+ vli_type unpadded; 62.2366 -+ vli_type uncompressed; 62.2367 -+ uint32_t crc32; 62.2368 -+}; 62.2369 -+ 62.2370 -+struct xz_dec { 62.2371 -+ /* Position in dec_main() */ 62.2372 -+ enum { 62.2373 -+ SEQ_STREAM_HEADER, 62.2374 -+ SEQ_BLOCK_START, 62.2375 -+ SEQ_BLOCK_HEADER, 62.2376 -+ SEQ_BLOCK_UNCOMPRESS, 62.2377 -+ SEQ_BLOCK_PADDING, 62.2378 -+ SEQ_BLOCK_CHECK, 62.2379 -+ SEQ_INDEX, 62.2380 -+ SEQ_INDEX_PADDING, 62.2381 -+ SEQ_INDEX_CRC32, 62.2382 -+ SEQ_STREAM_FOOTER 62.2383 -+ } sequence; 62.2384 -+ 62.2385 -+ /* Position in variable-length integers and Check fields */ 62.2386 -+ uint32_t pos; 62.2387 -+ 62.2388 -+ /* Variable-length integer decoded by dec_vli() */ 62.2389 -+ vli_type vli; 62.2390 -+ 62.2391 -+ /* Saved in_pos and out_pos */ 62.2392 -+ size_t in_start; 62.2393 -+ size_t out_start; 62.2394 -+ 62.2395 -+ /* CRC32 value in Block or Index */ 62.2396 -+ uint32_t crc32; 62.2397 -+ 62.2398 -+ /* Type of the integrity check calculated from uncompressed data */ 62.2399 -+ enum xz_check check_type; 62.2400 -+ 62.2401 -+ /* Operation mode */ 62.2402 -+ enum xz_mode mode; 62.2403 -+ 62.2404 -+ /* 62.2405 -+ * True if the next call to xz_dec_run() is allowed to return 62.2406 -+ * XZ_BUF_ERROR. 62.2407 -+ */ 62.2408 -+ bool allow_buf_error; 62.2409 -+ 62.2410 -+ /* Information stored in Block Header */ 62.2411 -+ struct { 62.2412 -+ /* 62.2413 -+ * Value stored in the Compressed Size field, or 62.2414 -+ * VLI_UNKNOWN if Compressed Size is not present. 62.2415 -+ */ 62.2416 -+ vli_type compressed; 62.2417 -+ 62.2418 -+ /* 62.2419 -+ * Value stored in the Uncompressed Size field, or 62.2420 -+ * VLI_UNKNOWN if Uncompressed Size is not present. 62.2421 -+ */ 62.2422 -+ vli_type uncompressed; 62.2423 -+ 62.2424 -+ /* Size of the Block Header field */ 62.2425 -+ uint32_t size; 62.2426 -+ } block_header; 62.2427 -+ 62.2428 -+ /* Information collected when decoding Blocks */ 62.2429 -+ struct { 62.2430 -+ /* Observed compressed size of the current Block */ 62.2431 -+ vli_type compressed; 62.2432 -+ 62.2433 -+ /* Observed uncompressed size of the current Block */ 62.2434 -+ vli_type uncompressed; 62.2435 -+ 62.2436 -+ /* Number of Blocks decoded so far */ 62.2437 -+ vli_type count; 62.2438 -+ 62.2439 -+ /* 62.2440 -+ * Hash calculated from the Block sizes. This is used to 62.2441 -+ * validate the Index field. 62.2442 -+ */ 62.2443 -+ struct xz_dec_hash hash; 62.2444 -+ } block; 62.2445 -+ 62.2446 -+ /* Variables needed when verifying the Index field */ 62.2447 -+ struct { 62.2448 -+ /* Position in dec_index() */ 62.2449 -+ enum { 62.2450 -+ SEQ_INDEX_COUNT, 62.2451 -+ SEQ_INDEX_UNPADDED, 62.2452 -+ SEQ_INDEX_UNCOMPRESSED 62.2453 -+ } sequence; 62.2454 -+ 62.2455 -+ /* Size of the Index in bytes */ 62.2456 -+ vli_type size; 62.2457 -+ 62.2458 -+ /* Number of Records (matches block.count in valid files) */ 62.2459 -+ vli_type count; 62.2460 -+ 62.2461 -+ /* 62.2462 -+ * Hash calculated from the Records (matches block.hash in 62.2463 -+ * valid files). 62.2464 -+ */ 62.2465 -+ struct xz_dec_hash hash; 62.2466 -+ } index; 62.2467 -+ 62.2468 -+ /* 62.2469 -+ * Temporary buffer needed to hold Stream Header, Block Header, 62.2470 -+ * and Stream Footer. The Block Header is the biggest (1 KiB) 62.2471 -+ * so we reserve space according to that. buf[] has to be aligned 62.2472 -+ * to a multiple of four bytes; the size_t variables before it 62.2473 -+ * should guarantee this. 62.2474 -+ */ 62.2475 -+ struct { 62.2476 -+ size_t pos; 62.2477 -+ size_t size; 62.2478 -+ uint8_t buf[1024]; 62.2479 -+ } temp; 62.2480 -+ 62.2481 -+ struct xz_dec_lzma2 *lzma2; 62.2482 -+ 62.2483 -+#ifdef XZ_DEC_BCJ 62.2484 -+ struct xz_dec_bcj *bcj; 62.2485 -+ bool bcj_active; 62.2486 -+#endif 62.2487 -+}; 62.2488 -+ 62.2489 -+#ifdef XZ_DEC_ANY_CHECK 62.2490 -+/* Sizes of the Check field with different Check IDs */ 62.2491 -+static const uint8_t check_sizes[16] = { 62.2492 -+ 0, 62.2493 -+ 4, 4, 4, 62.2494 -+ 8, 8, 8, 62.2495 -+ 16, 16, 16, 62.2496 -+ 32, 32, 32, 62.2497 -+ 64, 64, 64 62.2498 -+}; 62.2499 -+#endif 62.2500 -+ 62.2501 -+/* 62.2502 -+ * Fill s->temp by copying data starting from b->in[b->in_pos]. Caller 62.2503 -+ * must have set s->temp.pos to indicate how much data we are supposed 62.2504 -+ * to copy into s->temp.buf. Return true once s->temp.pos has reached 62.2505 -+ * s->temp.size. 62.2506 -+ */ 62.2507 -+static bool fill_temp(struct xz_dec *s, struct xz_buf *b) 62.2508 -+{ 62.2509 -+ size_t copy_size = min_t(size_t, 62.2510 -+ b->in_size - b->in_pos, s->temp.size - s->temp.pos); 62.2511 -+ 62.2512 -+ memcpy(s->temp.buf + s->temp.pos, b->in + b->in_pos, copy_size); 62.2513 -+ b->in_pos += copy_size; 62.2514 -+ s->temp.pos += copy_size; 62.2515 -+ 62.2516 -+ if (s->temp.pos == s->temp.size) { 62.2517 -+ s->temp.pos = 0; 62.2518 -+ return true; 62.2519 -+ } 62.2520 -+ 62.2521 -+ return false; 62.2522 -+} 62.2523 -+ 62.2524 -+/* Decode a variable-length integer (little-endian base-128 encoding) */ 62.2525 -+static enum xz_ret dec_vli(struct xz_dec *s, const uint8_t *in, 62.2526 -+ size_t *in_pos, size_t in_size) 62.2527 -+{ 62.2528 -+ uint8_t byte; 62.2529 -+ 62.2530 -+ if (s->pos == 0) 62.2531 -+ s->vli = 0; 62.2532 -+ 62.2533 -+ while (*in_pos < in_size) { 62.2534 -+ byte = in[*in_pos]; 62.2535 -+ ++*in_pos; 62.2536 -+ 62.2537 -+ s->vli |= (vli_type)(byte & 0x7F) << s->pos; 62.2538 -+ 62.2539 -+ if ((byte & 0x80) == 0) { 62.2540 -+ /* Don't allow non-minimal encodings. */ 62.2541 -+ if (byte == 0 && s->pos != 0) 62.2542 -+ return XZ_DATA_ERROR; 62.2543 -+ 62.2544 -+ s->pos = 0; 62.2545 -+ return XZ_STREAM_END; 62.2546 -+ } 62.2547 -+ 62.2548 -+ s->pos += 7; 62.2549 -+ if (s->pos == 7 * VLI_BYTES_MAX) 62.2550 -+ return XZ_DATA_ERROR; 62.2551 -+ } 62.2552 -+ 62.2553 -+ return XZ_OK; 62.2554 -+} 62.2555 -+ 62.2556 -+/* 62.2557 -+ * Decode the Compressed Data field from a Block. Update and validate 62.2558 -+ * the observed compressed and uncompressed sizes of the Block so that 62.2559 -+ * they don't exceed the values possibly stored in the Block Header 62.2560 -+ * (validation assumes that no integer overflow occurs, since vli_type 62.2561 -+ * is normally uint64_t). Update the CRC32 if presence of the CRC32 62.2562 -+ * field was indicated in Stream Header. 62.2563 -+ * 62.2564 -+ * Once the decoding is finished, validate that the observed sizes match 62.2565 -+ * the sizes possibly stored in the Block Header. Update the hash and 62.2566 -+ * Block count, which are later used to validate the Index field. 62.2567 -+ */ 62.2568 -+static enum xz_ret dec_block(struct xz_dec *s, struct xz_buf *b) 62.2569 -+{ 62.2570 -+ enum xz_ret ret; 62.2571 -+ 62.2572 -+ s->in_start = b->in_pos; 62.2573 -+ s->out_start = b->out_pos; 62.2574 -+ 62.2575 -+#ifdef XZ_DEC_BCJ 62.2576 -+ if (s->bcj_active) 62.2577 -+ ret = xz_dec_bcj_run(s->bcj, s->lzma2, b); 62.2578 -+ else 62.2579 -+#endif 62.2580 -+ ret = xz_dec_lzma2_run(s->lzma2, b); 62.2581 -+ 62.2582 -+ s->block.compressed += b->in_pos - s->in_start; 62.2583 -+ s->block.uncompressed += b->out_pos - s->out_start; 62.2584 -+ 62.2585 -+ /* 62.2586 -+ * There is no need to separately check for VLI_UNKNOWN, since 62.2587 -+ * the observed sizes are always smaller than VLI_UNKNOWN. 62.2588 -+ */ 62.2589 -+ if (s->block.compressed > s->block_header.compressed 62.2590 -+ || s->block.uncompressed 62.2591 -+ > s->block_header.uncompressed) 62.2592 -+ return XZ_DATA_ERROR; 62.2593 -+ 62.2594 -+ if (s->check_type == XZ_CHECK_CRC32) 62.2595 -+ s->crc32 = xz_crc32(b->out + s->out_start, 62.2596 -+ b->out_pos - s->out_start, s->crc32); 62.2597 -+ 62.2598 -+ if (ret == XZ_STREAM_END) { 62.2599 -+ if (s->block_header.compressed != VLI_UNKNOWN 62.2600 -+ && s->block_header.compressed 62.2601 -+ != s->block.compressed) 62.2602 -+ return XZ_DATA_ERROR; 62.2603 -+ 62.2604 -+ if (s->block_header.uncompressed != VLI_UNKNOWN 62.2605 -+ && s->block_header.uncompressed 62.2606 -+ != s->block.uncompressed) 62.2607 -+ return XZ_DATA_ERROR; 62.2608 -+ 62.2609 -+ s->block.hash.unpadded += s->block_header.size 62.2610 -+ + s->block.compressed; 62.2611 -+ 62.2612 -+#ifdef XZ_DEC_ANY_CHECK 62.2613 -+ s->block.hash.unpadded += check_sizes[s->check_type]; 62.2614 -+#else 62.2615 -+ if (s->check_type == XZ_CHECK_CRC32) 62.2616 -+ s->block.hash.unpadded += 4; 62.2617 -+#endif 62.2618 -+ 62.2619 -+ s->block.hash.uncompressed += s->block.uncompressed; 62.2620 -+ s->block.hash.crc32 = xz_crc32( 62.2621 -+ (const uint8_t *)&s->block.hash, 62.2622 -+ sizeof(s->block.hash), s->block.hash.crc32); 62.2623 -+ 62.2624 -+ ++s->block.count; 62.2625 -+ } 62.2626 -+ 62.2627 -+ return ret; 62.2628 -+} 62.2629 -+ 62.2630 -+/* Update the Index size and the CRC32 value. */ 62.2631 -+static void index_update(struct xz_dec *s, const struct xz_buf *b) 62.2632 -+{ 62.2633 -+ size_t in_used = b->in_pos - s->in_start; 62.2634 -+ s->index.size += in_used; 62.2635 -+ s->crc32 = xz_crc32(b->in + s->in_start, in_used, s->crc32); 62.2636 -+} 62.2637 -+ 62.2638 -+/* 62.2639 -+ * Decode the Number of Records, Unpadded Size, and Uncompressed Size 62.2640 -+ * fields from the Index field. That is, Index Padding and CRC32 are not 62.2641 -+ * decoded by this function. 62.2642 -+ * 62.2643 -+ * This can return XZ_OK (more input needed), XZ_STREAM_END (everything 62.2644 -+ * successfully decoded), or XZ_DATA_ERROR (input is corrupt). 62.2645 -+ */ 62.2646 -+static enum xz_ret dec_index(struct xz_dec *s, struct xz_buf *b) 62.2647 -+{ 62.2648 -+ enum xz_ret ret; 62.2649 -+ 62.2650 -+ do { 62.2651 -+ ret = dec_vli(s, b->in, &b->in_pos, b->in_size); 62.2652 -+ if (ret != XZ_STREAM_END) { 62.2653 -+ index_update(s, b); 62.2654 -+ return ret; 62.2655 -+ } 62.2656 -+ 62.2657 -+ switch (s->index.sequence) { 62.2658 -+ case SEQ_INDEX_COUNT: 62.2659 -+ s->index.count = s->vli; 62.2660 -+ 62.2661 -+ /* 62.2662 -+ * Validate that the Number of Records field 62.2663 -+ * indicates the same number of Records as 62.2664 -+ * there were Blocks in the Stream. 62.2665 -+ */ 62.2666 -+ if (s->index.count != s->block.count) 62.2667 -+ return XZ_DATA_ERROR; 62.2668 -+ 62.2669 -+ s->index.sequence = SEQ_INDEX_UNPADDED; 62.2670 -+ break; 62.2671 -+ 62.2672 -+ case SEQ_INDEX_UNPADDED: 62.2673 -+ s->index.hash.unpadded += s->vli; 62.2674 -+ s->index.sequence = SEQ_INDEX_UNCOMPRESSED; 62.2675 -+ break; 62.2676 -+ 62.2677 -+ case SEQ_INDEX_UNCOMPRESSED: 62.2678 -+ s->index.hash.uncompressed += s->vli; 62.2679 -+ s->index.hash.crc32 = xz_crc32( 62.2680 -+ (const uint8_t *)&s->index.hash, 62.2681 -+ sizeof(s->index.hash), 62.2682 -+ s->index.hash.crc32); 62.2683 -+ --s->index.count; 62.2684 -+ s->index.sequence = SEQ_INDEX_UNPADDED; 62.2685 -+ break; 62.2686 -+ } 62.2687 -+ } while (s->index.count > 0); 62.2688 -+ 62.2689 -+ return XZ_STREAM_END; 62.2690 -+} 62.2691 -+ 62.2692 -+/* 62.2693 -+ * Validate that the next four input bytes match the value of s->crc32. 62.2694 -+ * s->pos must be zero when starting to validate the first byte. 62.2695 -+ */ 62.2696 -+static enum xz_ret crc32_validate(struct xz_dec *s, struct xz_buf *b) 62.2697 -+{ 62.2698 -+ do { 62.2699 -+ if (b->in_pos == b->in_size) 62.2700 -+ return XZ_OK; 62.2701 -+ 62.2702 -+ if (((s->crc32 >> s->pos) & 0xFF) != b->in[b->in_pos++]) 62.2703 -+ return XZ_DATA_ERROR; 62.2704 -+ 62.2705 -+ s->pos += 8; 62.2706 -+ 62.2707 -+ } while (s->pos < 32); 62.2708 -+ 62.2709 -+ s->crc32 = 0; 62.2710 -+ s->pos = 0; 62.2711 -+ 62.2712 -+ return XZ_STREAM_END; 62.2713 -+} 62.2714 -+ 62.2715 -+#ifdef XZ_DEC_ANY_CHECK 62.2716 -+/* 62.2717 -+ * Skip over the Check field when the Check ID is not supported. 62.2718 -+ * Returns true once the whole Check field has been skipped over. 62.2719 -+ */ 62.2720 -+static bool check_skip(struct xz_dec *s, struct xz_buf *b) 62.2721 -+{ 62.2722 -+ while (s->pos < check_sizes[s->check_type]) { 62.2723 -+ if (b->in_pos == b->in_size) 62.2724 -+ return false; 62.2725 -+ 62.2726 -+ ++b->in_pos; 62.2727 -+ ++s->pos; 62.2728 -+ } 62.2729 -+ 62.2730 -+ s->pos = 0; 62.2731 -+ 62.2732 -+ return true; 62.2733 -+} 62.2734 -+#endif 62.2735 -+ 62.2736 -+/* Decode the Stream Header field (the first 12 bytes of the .xz Stream). */ 62.2737 -+static enum xz_ret dec_stream_header(struct xz_dec *s) 62.2738 -+{ 62.2739 -+ if (!memeq(s->temp.buf, HEADER_MAGIC, HEADER_MAGIC_SIZE)) 62.2740 -+ return XZ_FORMAT_ERROR; 62.2741 -+ 62.2742 -+ if (xz_crc32(s->temp.buf + HEADER_MAGIC_SIZE, 2, 0) 62.2743 -+ != get_le32(s->temp.buf + HEADER_MAGIC_SIZE + 2)) 62.2744 -+ return XZ_DATA_ERROR; 62.2745 -+ 62.2746 -+ if (s->temp.buf[HEADER_MAGIC_SIZE] != 0) 62.2747 -+ return XZ_OPTIONS_ERROR; 62.2748 -+ 62.2749 -+ /* 62.2750 -+ * Of integrity checks, we support only none (Check ID = 0) and 62.2751 -+ * CRC32 (Check ID = 1). However, if XZ_DEC_ANY_CHECK is defined, 62.2752 -+ * we will accept other check types too, but then the check won't 62.2753 -+ * be verified and a warning (XZ_UNSUPPORTED_CHECK) will be given. 62.2754 -+ */ 62.2755 -+ s->check_type = s->temp.buf[HEADER_MAGIC_SIZE + 1]; 62.2756 -+ 62.2757 -+#ifdef XZ_DEC_ANY_CHECK 62.2758 -+ if (s->check_type > XZ_CHECK_MAX) 62.2759 -+ return XZ_OPTIONS_ERROR; 62.2760 -+ 62.2761 -+ if (s->check_type > XZ_CHECK_CRC32) 62.2762 -+ return XZ_UNSUPPORTED_CHECK; 62.2763 -+#else 62.2764 -+ if (s->check_type > XZ_CHECK_CRC32) 62.2765 -+ return XZ_OPTIONS_ERROR; 62.2766 -+#endif 62.2767 -+ 62.2768 -+ return XZ_OK; 62.2769 -+} 62.2770 -+ 62.2771 -+/* Decode the Stream Footer field (the last 12 bytes of the .xz Stream) */ 62.2772 -+static enum xz_ret dec_stream_footer(struct xz_dec *s) 62.2773 -+{ 62.2774 -+ if (!memeq(s->temp.buf + 10, FOOTER_MAGIC, FOOTER_MAGIC_SIZE)) 62.2775 -+ return XZ_DATA_ERROR; 62.2776 -+ 62.2777 -+ if (xz_crc32(s->temp.buf + 4, 6, 0) != get_le32(s->temp.buf)) 62.2778 -+ return XZ_DATA_ERROR; 62.2779 -+ 62.2780 -+ /* 62.2781 -+ * Validate Backward Size. Note that we never added the size of the 62.2782 -+ * Index CRC32 field to s->index.size, thus we use s->index.size / 4 62.2783 -+ * instead of s->index.size / 4 - 1. 62.2784 -+ */ 62.2785 -+ if ((s->index.size >> 2) != get_le32(s->temp.buf + 4)) 62.2786 -+ return XZ_DATA_ERROR; 62.2787 -+ 62.2788 -+ if (s->temp.buf[8] != 0 || s->temp.buf[9] != s->check_type) 62.2789 -+ return XZ_DATA_ERROR; 62.2790 -+ 62.2791 -+ /* 62.2792 -+ * Use XZ_STREAM_END instead of XZ_OK to be more convenient 62.2793 -+ * for the caller. 62.2794 -+ */ 62.2795 -+ return XZ_STREAM_END; 62.2796 -+} 62.2797 -+ 62.2798 -+/* Decode the Block Header and initialize the filter chain. */ 62.2799 -+static enum xz_ret dec_block_header(struct xz_dec *s) 62.2800 -+{ 62.2801 -+ enum xz_ret ret; 62.2802 -+ 62.2803 -+ /* 62.2804 -+ * Validate the CRC32. We know that the temp buffer is at least 62.2805 -+ * eight bytes so this is safe. 62.2806 -+ */ 62.2807 -+ s->temp.size -= 4; 62.2808 -+ if (xz_crc32(s->temp.buf, s->temp.size, 0) 62.2809 -+ != get_le32(s->temp.buf + s->temp.size)) 62.2810 -+ return XZ_DATA_ERROR; 62.2811 -+ 62.2812 -+ s->temp.pos = 2; 62.2813 -+ 62.2814 -+ /* 62.2815 -+ * Catch unsupported Block Flags. We support only one or two filters 62.2816 -+ * in the chain, so we catch that with the same test. 62.2817 -+ */ 62.2818 -+#ifdef XZ_DEC_BCJ 62.2819 -+ if (s->temp.buf[1] & 0x3E) 62.2820 -+#else 62.2821 -+ if (s->temp.buf[1] & 0x3F) 62.2822 -+#endif 62.2823 -+ return XZ_OPTIONS_ERROR; 62.2824 -+ 62.2825 -+ /* Compressed Size */ 62.2826 -+ if (s->temp.buf[1] & 0x40) { 62.2827 -+ if (dec_vli(s, s->temp.buf, &s->temp.pos, s->temp.size) 62.2828 -+ != XZ_STREAM_END) 62.2829 -+ return XZ_DATA_ERROR; 62.2830 -+ 62.2831 -+ s->block_header.compressed = s->vli; 62.2832 -+ } else { 62.2833 -+ s->block_header.compressed = VLI_UNKNOWN; 62.2834 -+ } 62.2835 -+ 62.2836 -+ /* Uncompressed Size */ 62.2837 -+ if (s->temp.buf[1] & 0x80) { 62.2838 -+ if (dec_vli(s, s->temp.buf, &s->temp.pos, s->temp.size) 62.2839 -+ != XZ_STREAM_END) 62.2840 -+ return XZ_DATA_ERROR; 62.2841 -+ 62.2842 -+ s->block_header.uncompressed = s->vli; 62.2843 -+ } else { 62.2844 -+ s->block_header.uncompressed = VLI_UNKNOWN; 62.2845 -+ } 62.2846 -+ 62.2847 -+#ifdef XZ_DEC_BCJ 62.2848 -+ /* If there are two filters, the first one must be a BCJ filter. */ 62.2849 -+ s->bcj_active = s->temp.buf[1] & 0x01; 62.2850 -+ if (s->bcj_active) { 62.2851 -+ if (s->temp.size - s->temp.pos < 2) 62.2852 -+ return XZ_OPTIONS_ERROR; 62.2853 -+ 62.2854 -+ ret = xz_dec_bcj_reset(s->bcj, s->temp.buf[s->temp.pos++]); 62.2855 -+ if (ret != XZ_OK) 62.2856 -+ return ret; 62.2857 -+ 62.2858 -+ /* 62.2859 -+ * We don't support custom start offset, 62.2860 -+ * so Size of Properties must be zero. 62.2861 -+ */ 62.2862 -+ if (s->temp.buf[s->temp.pos++] != 0x00) 62.2863 -+ return XZ_OPTIONS_ERROR; 62.2864 -+ } 62.2865 -+#endif 62.2866 -+ 62.2867 -+ /* Valid Filter Flags always take at least two bytes. */ 62.2868 -+ if (s->temp.size - s->temp.pos < 2) 62.2869 -+ return XZ_DATA_ERROR; 62.2870 -+ 62.2871 -+ /* Filter ID = LZMA2 */ 62.2872 -+ if (s->temp.buf[s->temp.pos++] != 0x21) 62.2873 -+ return XZ_OPTIONS_ERROR; 62.2874 -+ 62.2875 -+ /* Size of Properties = 1-byte Filter Properties */ 62.2876 -+ if (s->temp.buf[s->temp.pos++] != 0x01) 62.2877 -+ return XZ_OPTIONS_ERROR; 62.2878 -+ 62.2879 -+ /* Filter Properties contains LZMA2 dictionary size. */ 62.2880 -+ if (s->temp.size - s->temp.pos < 1) 62.2881 -+ return XZ_DATA_ERROR; 62.2882 -+ 62.2883 -+ ret = xz_dec_lzma2_reset(s->lzma2, s->temp.buf[s->temp.pos++]); 62.2884 -+ if (ret != XZ_OK) 62.2885 -+ return ret; 62.2886 -+ 62.2887 -+ /* The rest must be Header Padding. */ 62.2888 -+ while (s->temp.pos < s->temp.size) 62.2889 -+ if (s->temp.buf[s->temp.pos++] != 0x00) 62.2890 -+ return XZ_OPTIONS_ERROR; 62.2891 -+ 62.2892 -+ s->temp.pos = 0; 62.2893 -+ s->block.compressed = 0; 62.2894 -+ s->block.uncompressed = 0; 62.2895 -+ 62.2896 -+ return XZ_OK; 62.2897 -+} 62.2898 -+ 62.2899 -+static enum xz_ret dec_main(struct xz_dec *s, struct xz_buf *b) 62.2900 -+{ 62.2901 -+ enum xz_ret ret; 62.2902 -+ 62.2903 -+ /* 62.2904 -+ * Store the start position for the case when we are in the middle 62.2905 -+ * of the Index field. 62.2906 -+ */ 62.2907 -+ s->in_start = b->in_pos; 62.2908 -+ 62.2909 -+ while (true) { 62.2910 -+ switch (s->sequence) { 62.2911 -+ case SEQ_STREAM_HEADER: 62.2912 -+ /* 62.2913 -+ * Stream Header is copied to s->temp, and then 62.2914 -+ * decoded from there. This way if the caller 62.2915 -+ * gives us only little input at a time, we can 62.2916 -+ * still keep the Stream Header decoding code 62.2917 -+ * simple. Similar approach is used in many places 62.2918 -+ * in this file. 62.2919 -+ */ 62.2920 -+ if (!fill_temp(s, b)) 62.2921 -+ return XZ_OK; 62.2922 -+ 62.2923 -+ /* 62.2924 -+ * If dec_stream_header() returns 62.2925 -+ * XZ_UNSUPPORTED_CHECK, it is still possible 62.2926 -+ * to continue decoding if working in multi-call 62.2927 -+ * mode. Thus, update s->sequence before calling 62.2928 -+ * dec_stream_header(). 62.2929 -+ */ 62.2930 -+ s->sequence = SEQ_BLOCK_START; 62.2931 -+ 62.2932 -+ ret = dec_stream_header(s); 62.2933 -+ if (ret != XZ_OK) 62.2934 -+ return ret; 62.2935 -+ 62.2936 -+ case SEQ_BLOCK_START: 62.2937 -+ /* We need one byte of input to continue. */ 62.2938 -+ if (b->in_pos == b->in_size) 62.2939 -+ return XZ_OK; 62.2940 -+ 62.2941 -+ /* See if this is the beginning of the Index field. */ 62.2942 -+ if (b->in[b->in_pos] == 0) { 62.2943 -+ s->in_start = b->in_pos++; 62.2944 -+ s->sequence = SEQ_INDEX; 62.2945 -+ break; 62.2946 -+ } 62.2947 -+ 62.2948 -+ /* 62.2949 -+ * Calculate the size of the Block Header and 62.2950 -+ * prepare to decode it. 62.2951 -+ */ 62.2952 -+ s->block_header.size 62.2953 -+ = ((uint32_t)b->in[b->in_pos] + 1) * 4; 62.2954 -+ 62.2955 -+ s->temp.size = s->block_header.size; 62.2956 -+ s->temp.pos = 0; 62.2957 -+ s->sequence = SEQ_BLOCK_HEADER; 62.2958 -+ 62.2959 -+ case SEQ_BLOCK_HEADER: 62.2960 -+ if (!fill_temp(s, b)) 62.2961 -+ return XZ_OK; 62.2962 -+ 62.2963 -+ ret = dec_block_header(s); 62.2964 -+ if (ret != XZ_OK) 62.2965 -+ return ret; 62.2966 -+ 62.2967 -+ s->sequence = SEQ_BLOCK_UNCOMPRESS; 62.2968 -+ 62.2969 -+ case SEQ_BLOCK_UNCOMPRESS: 62.2970 -+ ret = dec_block(s, b); 62.2971 -+ if (ret != XZ_STREAM_END) 62.2972 -+ return ret; 62.2973 -+ 62.2974 -+ s->sequence = SEQ_BLOCK_PADDING; 62.2975 -+ 62.2976 -+ case SEQ_BLOCK_PADDING: 62.2977 -+ /* 62.2978 -+ * Size of Compressed Data + Block Padding 62.2979 -+ * must be a multiple of four. We don't need 62.2980 -+ * s->block.compressed for anything else 62.2981 -+ * anymore, so we use it here to test the size 62.2982 -+ * of the Block Padding field. 62.2983 -+ */ 62.2984 -+ while (s->block.compressed & 3) { 62.2985 -+ if (b->in_pos == b->in_size) 62.2986 -+ return XZ_OK; 62.2987 -+ 62.2988 -+ if (b->in[b->in_pos++] != 0) 62.2989 -+ return XZ_DATA_ERROR; 62.2990 -+ 62.2991 -+ ++s->block.compressed; 62.2992 -+ } 62.2993 -+ 62.2994 -+ s->sequence = SEQ_BLOCK_CHECK; 62.2995 -+ 62.2996 -+ case SEQ_BLOCK_CHECK: 62.2997 -+ if (s->check_type == XZ_CHECK_CRC32) { 62.2998 -+ ret = crc32_validate(s, b); 62.2999 -+ if (ret != XZ_STREAM_END) 62.3000 -+ return ret; 62.3001 -+ } 62.3002 -+#ifdef XZ_DEC_ANY_CHECK 62.3003 -+ else if (!check_skip(s, b)) { 62.3004 -+ return XZ_OK; 62.3005 -+ } 62.3006 -+#endif 62.3007 -+ 62.3008 -+ s->sequence = SEQ_BLOCK_START; 62.3009 -+ break; 62.3010 -+ 62.3011 -+ case SEQ_INDEX: 62.3012 -+ ret = dec_index(s, b); 62.3013 -+ if (ret != XZ_STREAM_END) 62.3014 -+ return ret; 62.3015 -+ 62.3016 -+ s->sequence = SEQ_INDEX_PADDING; 62.3017 -+ 62.3018 -+ case SEQ_INDEX_PADDING: 62.3019 -+ while ((s->index.size + (b->in_pos - s->in_start)) 62.3020 -+ & 3) { 62.3021 -+ if (b->in_pos == b->in_size) { 62.3022 -+ index_update(s, b); 62.3023 -+ return XZ_OK; 62.3024 -+ } 62.3025 -+ 62.3026 -+ if (b->in[b->in_pos++] != 0) 62.3027 -+ return XZ_DATA_ERROR; 62.3028 -+ } 62.3029 -+ 62.3030 -+ /* Finish the CRC32 value and Index size. */ 62.3031 -+ index_update(s, b); 62.3032 -+ 62.3033 -+ /* Compare the hashes to validate the Index field. */ 62.3034 -+ if (!memeq(&s->block.hash, &s->index.hash, 62.3035 -+ sizeof(s->block.hash))) 62.3036 -+ return XZ_DATA_ERROR; 62.3037 -+ 62.3038 -+ s->sequence = SEQ_INDEX_CRC32; 62.3039 -+ 62.3040 -+ case SEQ_INDEX_CRC32: 62.3041 -+ ret = crc32_validate(s, b); 62.3042 -+ if (ret != XZ_STREAM_END) 62.3043 -+ return ret; 62.3044 -+ 62.3045 -+ s->temp.size = STREAM_HEADER_SIZE; 62.3046 -+ s->sequence = SEQ_STREAM_FOOTER; 62.3047 -+ 62.3048 -+ case SEQ_STREAM_FOOTER: 62.3049 -+ if (!fill_temp(s, b)) 62.3050 -+ return XZ_OK; 62.3051 -+ 62.3052 -+ return dec_stream_footer(s); 62.3053 -+ } 62.3054 -+ } 62.3055 -+ 62.3056 -+ /* Never reached */ 62.3057 -+} 62.3058 -+ 62.3059 -+/* 62.3060 -+ * xz_dec_run() is a wrapper for dec_main() to handle some special cases in 62.3061 -+ * multi-call and single-call decoding. 62.3062 -+ * 62.3063 -+ * In multi-call mode, we must return XZ_BUF_ERROR when it seems clear that we 62.3064 -+ * are not going to make any progress anymore. This is to prevent the caller 62.3065 -+ * from calling us infinitely when the input file is truncated or otherwise 62.3066 -+ * corrupt. Since zlib-style API allows that the caller fills the input buffer 62.3067 -+ * only when the decoder doesn't produce any new output, we have to be careful 62.3068 -+ * to avoid returning XZ_BUF_ERROR too easily: XZ_BUF_ERROR is returned only 62.3069 -+ * after the second consecutive call to xz_dec_run() that makes no progress. 62.3070 -+ * 62.3071 -+ * In single-call mode, if we couldn't decode everything and no error 62.3072 -+ * occurred, either the input is truncated or the output buffer is too small. 62.3073 -+ * Since we know that the last input byte never produces any output, we know 62.3074 -+ * that if all the input was consumed and decoding wasn't finished, the file 62.3075 -+ * must be corrupt. Otherwise the output buffer has to be too small or the 62.3076 -+ * file is corrupt in a way that decoding it produces too big output. 62.3077 -+ * 62.3078 -+ * If single-call decoding fails, we reset b->in_pos and b->out_pos back to 62.3079 -+ * their original values. This is because with some filter chains there won't 62.3080 -+ * be any valid uncompressed data in the output buffer unless the decoding 62.3081 -+ * actually succeeds (that's the price to pay of using the output buffer as 62.3082 -+ * the workspace). 62.3083 -+ */ 62.3084 -+XZ_EXTERN enum xz_ret xz_dec_run(struct xz_dec *s, struct xz_buf *b) 62.3085 -+{ 62.3086 -+ size_t in_start; 62.3087 -+ size_t out_start; 62.3088 -+ enum xz_ret ret; 62.3089 -+ 62.3090 -+ if (DEC_IS_SINGLE(s->mode)) 62.3091 -+ xz_dec_reset(s); 62.3092 -+ 62.3093 -+ in_start = b->in_pos; 62.3094 -+ out_start = b->out_pos; 62.3095 -+ ret = dec_main(s, b); 62.3096 -+ 62.3097 -+ if (DEC_IS_SINGLE(s->mode)) { 62.3098 -+ if (ret == XZ_OK) 62.3099 -+ ret = b->in_pos == b->in_size 62.3100 -+ ? XZ_DATA_ERROR : XZ_BUF_ERROR; 62.3101 -+ 62.3102 -+ if (ret != XZ_STREAM_END) { 62.3103 -+ b->in_pos = in_start; 62.3104 -+ b->out_pos = out_start; 62.3105 -+ } 62.3106 -+ 62.3107 -+ } else if (ret == XZ_OK && in_start == b->in_pos 62.3108 -+ && out_start == b->out_pos) { 62.3109 -+ if (s->allow_buf_error) 62.3110 -+ ret = XZ_BUF_ERROR; 62.3111 -+ 62.3112 -+ s->allow_buf_error = true; 62.3113 -+ } else { 62.3114 -+ s->allow_buf_error = false; 62.3115 -+ } 62.3116 -+ 62.3117 -+ return ret; 62.3118 -+} 62.3119 -+ 62.3120 -+XZ_EXTERN struct xz_dec *xz_dec_init(enum xz_mode mode, uint32_t dict_max) 62.3121 -+{ 62.3122 -+ struct xz_dec *s = kmalloc(sizeof(*s), GFP_KERNEL); 62.3123 -+ if (s == NULL) 62.3124 -+ return NULL; 62.3125 -+ 62.3126 -+ s->mode = mode; 62.3127 -+ 62.3128 -+#ifdef XZ_DEC_BCJ 62.3129 -+ s->bcj = xz_dec_bcj_create(DEC_IS_SINGLE(mode)); 62.3130 -+ if (s->bcj == NULL) 62.3131 -+ goto error_bcj; 62.3132 -+#endif 62.3133 -+ 62.3134 -+ s->lzma2 = xz_dec_lzma2_create(mode, dict_max); 62.3135 -+ if (s->lzma2 == NULL) 62.3136 -+ goto error_lzma2; 62.3137 -+ 62.3138 -+ xz_dec_reset(s); 62.3139 -+ return s; 62.3140 -+ 62.3141 -+error_lzma2: 62.3142 -+#ifdef XZ_DEC_BCJ 62.3143 -+ xz_dec_bcj_end(s->bcj); 62.3144 -+error_bcj: 62.3145 -+#endif 62.3146 -+ kfree(s); 62.3147 -+ return NULL; 62.3148 -+} 62.3149 -+ 62.3150 -+XZ_EXTERN void xz_dec_reset(struct xz_dec *s) 62.3151 -+{ 62.3152 -+ s->sequence = SEQ_STREAM_HEADER; 62.3153 -+ s->allow_buf_error = false; 62.3154 -+ s->pos = 0; 62.3155 -+ s->crc32 = 0; 62.3156 -+ memzero(&s->block, sizeof(s->block)); 62.3157 -+ memzero(&s->index, sizeof(s->index)); 62.3158 -+ s->temp.pos = 0; 62.3159 -+ s->temp.size = STREAM_HEADER_SIZE; 62.3160 -+} 62.3161 -+ 62.3162 -+XZ_EXTERN void xz_dec_end(struct xz_dec *s) 62.3163 -+{ 62.3164 -+ if (s != NULL) { 62.3165 -+ xz_dec_lzma2_end(s->lzma2); 62.3166 -+#ifdef XZ_DEC_BCJ 62.3167 -+ xz_dec_bcj_end(s->bcj); 62.3168 -+#endif 62.3169 -+ kfree(s); 62.3170 -+ } 62.3171 -+} 62.3172 -diff --git a/lib/xz/xz_dec_syms.c b/lib/xz/xz_dec_syms.c 62.3173 -new file mode 100644 62.3174 -index 0000000..32eb3c0 62.3175 ---- /dev/null 62.3176 -+++ b/lib/xz/xz_dec_syms.c 62.3177 -@@ -0,0 +1,26 @@ 62.3178 -+/* 62.3179 -+ * XZ decoder module information 62.3180 -+ * 62.3181 -+ * Author: Lasse Collin <lasse.collin@tukaani.org> 62.3182 -+ * 62.3183 -+ * This file has been put into the public domain. 62.3184 -+ * You can do whatever you want with this file. 62.3185 -+ */ 62.3186 -+ 62.3187 -+#include <linux/module.h> 62.3188 -+#include <linux/xz.h> 62.3189 -+ 62.3190 -+EXPORT_SYMBOL(xz_dec_init); 62.3191 -+EXPORT_SYMBOL(xz_dec_reset); 62.3192 -+EXPORT_SYMBOL(xz_dec_run); 62.3193 -+EXPORT_SYMBOL(xz_dec_end); 62.3194 -+ 62.3195 -+MODULE_DESCRIPTION("XZ decompressor"); 62.3196 -+MODULE_VERSION("1.0"); 62.3197 -+MODULE_AUTHOR("Lasse Collin <lasse.collin@tukaani.org> and Igor Pavlov"); 62.3198 -+ 62.3199 -+/* 62.3200 -+ * This code is in the public domain, but in Linux it's simplest to just 62.3201 -+ * say it's GPL and consider the authors as the copyright holders. 62.3202 -+ */ 62.3203 -+MODULE_LICENSE("GPL"); 62.3204 -diff --git a/lib/xz/xz_dec_test.c b/lib/xz/xz_dec_test.c 62.3205 -new file mode 100644 62.3206 -index 0000000..da28a19 62.3207 ---- /dev/null 62.3208 -+++ b/lib/xz/xz_dec_test.c 62.3209 -@@ -0,0 +1,220 @@ 62.3210 -+/* 62.3211 -+ * XZ decoder tester 62.3212 -+ * 62.3213 -+ * Author: Lasse Collin <lasse.collin@tukaani.org> 62.3214 -+ * 62.3215 -+ * This file has been put into the public domain. 62.3216 -+ * You can do whatever you want with this file. 62.3217 -+ */ 62.3218 -+ 62.3219 -+#include <linux/kernel.h> 62.3220 -+#include <linux/module.h> 62.3221 -+#include <linux/fs.h> 62.3222 -+#include <linux/uaccess.h> 62.3223 -+#include <linux/crc32.h> 62.3224 -+#include <linux/xz.h> 62.3225 -+ 62.3226 -+/* Maximum supported dictionary size */ 62.3227 -+#define DICT_MAX (1 << 20) 62.3228 -+ 62.3229 -+/* Device name to pass to register_chrdev(). */ 62.3230 -+#define DEVICE_NAME "xz_dec_test" 62.3231 -+ 62.3232 -+/* Dynamically allocated device major number */ 62.3233 -+static int device_major; 62.3234 -+ 62.3235 -+/* 62.3236 -+ * We reuse the same decoder state, and thus can decode only one 62.3237 -+ * file at a time. 62.3238 -+ */ 62.3239 -+static bool device_is_open; 62.3240 -+ 62.3241 -+/* XZ decoder state */ 62.3242 -+static struct xz_dec *state; 62.3243 -+ 62.3244 -+/* 62.3245 -+ * Return value of xz_dec_run(). We need to avoid calling xz_dec_run() after 62.3246 -+ * it has returned XZ_STREAM_END, so we make this static. 62.3247 -+ */ 62.3248 -+static enum xz_ret ret; 62.3249 -+ 62.3250 -+/* 62.3251 -+ * Input and output buffers. The input buffer is used as a temporary safe 62.3252 -+ * place for the data coming from the userspace. 62.3253 -+ */ 62.3254 -+static uint8_t buffer_in[1024]; 62.3255 -+static uint8_t buffer_out[1024]; 62.3256 -+ 62.3257 -+/* 62.3258 -+ * Structure to pass the input and output buffers to the XZ decoder. 62.3259 -+ * A few of the fields are never modified so we initialize them here. 62.3260 -+ */ 62.3261 -+static struct xz_buf buffers = { 62.3262 -+ .in = buffer_in, 62.3263 -+ .out = buffer_out, 62.3264 -+ .out_size = sizeof(buffer_out) 62.3265 -+}; 62.3266 -+ 62.3267 -+/* 62.3268 -+ * CRC32 of uncompressed data. This is used to give the user a simple way 62.3269 -+ * to check that the decoder produces correct output. 62.3270 -+ */ 62.3271 -+static uint32_t crc; 62.3272 -+ 62.3273 -+static int xz_dec_test_open(struct inode *i, struct file *f) 62.3274 -+{ 62.3275 -+ if (device_is_open) 62.3276 -+ return -EBUSY; 62.3277 -+ 62.3278 -+ device_is_open = true; 62.3279 -+ 62.3280 -+ xz_dec_reset(state); 62.3281 -+ ret = XZ_OK; 62.3282 -+ crc = 0xFFFFFFFF; 62.3283 -+ 62.3284 -+ buffers.in_pos = 0; 62.3285 -+ buffers.in_size = 0; 62.3286 -+ buffers.out_pos = 0; 62.3287 -+ 62.3288 -+ printk(KERN_INFO DEVICE_NAME ": opened\n"); 62.3289 -+ return 0; 62.3290 -+} 62.3291 -+ 62.3292 -+static int xz_dec_test_release(struct inode *i, struct file *f) 62.3293 -+{ 62.3294 -+ device_is_open = false; 62.3295 -+ 62.3296 -+ if (ret == XZ_OK) 62.3297 -+ printk(KERN_INFO DEVICE_NAME ": input was truncated\n"); 62.3298 -+ 62.3299 -+ printk(KERN_INFO DEVICE_NAME ": closed\n"); 62.3300 -+ return 0; 62.3301 -+} 62.3302 -+ 62.3303 -+/* 62.3304 -+ * Decode the data given to us from the userspace. CRC32 of the uncompressed 62.3305 -+ * data is calculated and is printed at the end of successful decoding. The 62.3306 -+ * uncompressed data isn't stored anywhere for further use. 62.3307 -+ * 62.3308 -+ * The .xz file must have exactly one Stream and no Stream Padding. The data 62.3309 -+ * after the first Stream is considered to be garbage. 62.3310 -+ */ 62.3311 -+static ssize_t xz_dec_test_write(struct file *file, const char __user *buf, 62.3312 -+ size_t size, loff_t *pos) 62.3313 -+{ 62.3314 -+ size_t remaining; 62.3315 -+ 62.3316 -+ if (ret != XZ_OK) { 62.3317 -+ if (size > 0) 62.3318 -+ printk(KERN_INFO DEVICE_NAME ": %zu bytes of " 62.3319 -+ "garbage at the end of the file\n", 62.3320 -+ size); 62.3321 -+ 62.3322 -+ return -ENOSPC; 62.3323 -+ } 62.3324 -+ 62.3325 -+ printk(KERN_INFO DEVICE_NAME ": decoding %zu bytes of input\n", 62.3326 -+ size); 62.3327 -+ 62.3328 -+ remaining = size; 62.3329 -+ while ((remaining > 0 || buffers.out_pos == buffers.out_size) 62.3330 -+ && ret == XZ_OK) { 62.3331 -+ if (buffers.in_pos == buffers.in_size) { 62.3332 -+ buffers.in_pos = 0; 62.3333 -+ buffers.in_size = min(remaining, sizeof(buffer_in)); 62.3334 -+ if (copy_from_user(buffer_in, buf, buffers.in_size)) 62.3335 -+ return -EFAULT; 62.3336 -+ 62.3337 -+ buf += buffers.in_size; 62.3338 -+ remaining -= buffers.in_size; 62.3339 -+ } 62.3340 -+ 62.3341 -+ buffers.out_pos = 0; 62.3342 -+ ret = xz_dec_run(state, &buffers); 62.3343 -+ crc = crc32(crc, buffer_out, buffers.out_pos); 62.3344 -+ } 62.3345 -+ 62.3346 -+ switch (ret) { 62.3347 -+ case XZ_OK: 62.3348 -+ printk(KERN_INFO DEVICE_NAME ": XZ_OK\n"); 62.3349 -+ return size; 62.3350 -+ 62.3351 -+ case XZ_STREAM_END: 62.3352 -+ printk(KERN_INFO DEVICE_NAME ": XZ_STREAM_END, " 62.3353 -+ "CRC32 = 0x%08X\n", ~crc); 62.3354 -+ return size - remaining - (buffers.in_size - buffers.in_pos); 62.3355 -+ 62.3356 -+ case XZ_MEMLIMIT_ERROR: 62.3357 -+ printk(KERN_INFO DEVICE_NAME ": XZ_MEMLIMIT_ERROR\n"); 62.3358 -+ break; 62.3359 -+ 62.3360 -+ case XZ_FORMAT_ERROR: 62.3361 -+ printk(KERN_INFO DEVICE_NAME ": XZ_FORMAT_ERROR\n"); 62.3362 -+ break; 62.3363 -+ 62.3364 -+ case XZ_OPTIONS_ERROR: 62.3365 -+ printk(KERN_INFO DEVICE_NAME ": XZ_OPTIONS_ERROR\n"); 62.3366 -+ break; 62.3367 -+ 62.3368 -+ case XZ_DATA_ERROR: 62.3369 -+ printk(KERN_INFO DEVICE_NAME ": XZ_DATA_ERROR\n"); 62.3370 -+ break; 62.3371 -+ 62.3372 -+ case XZ_BUF_ERROR: 62.3373 -+ printk(KERN_INFO DEVICE_NAME ": XZ_BUF_ERROR\n"); 62.3374 -+ break; 62.3375 -+ 62.3376 -+ default: 62.3377 -+ printk(KERN_INFO DEVICE_NAME ": Bug detected!\n"); 62.3378 -+ break; 62.3379 -+ } 62.3380 -+ 62.3381 -+ return -EIO; 62.3382 -+} 62.3383 -+ 62.3384 -+/* Allocate the XZ decoder state and register the character device. */ 62.3385 -+static int __init xz_dec_test_init(void) 62.3386 -+{ 62.3387 -+ static const struct file_operations fileops = { 62.3388 -+ .owner = THIS_MODULE, 62.3389 -+ .open = &xz_dec_test_open, 62.3390 -+ .release = &xz_dec_test_release, 62.3391 -+ .write = &xz_dec_test_write 62.3392 -+ }; 62.3393 -+ 62.3394 -+ state = xz_dec_init(XZ_PREALLOC, DICT_MAX); 62.3395 -+ if (state == NULL) 62.3396 -+ return -ENOMEM; 62.3397 -+ 62.3398 -+ device_major = register_chrdev(0, DEVICE_NAME, &fileops); 62.3399 -+ if (device_major < 0) { 62.3400 -+ xz_dec_end(state); 62.3401 -+ return device_major; 62.3402 -+ } 62.3403 -+ 62.3404 -+ printk(KERN_INFO DEVICE_NAME ": module loaded\n"); 62.3405 -+ printk(KERN_INFO DEVICE_NAME ": Create a device node with " 62.3406 -+ "'mknod " DEVICE_NAME " c %d 0' and write .xz files " 62.3407 -+ "to it.\n", device_major); 62.3408 -+ return 0; 62.3409 -+} 62.3410 -+ 62.3411 -+static void __exit xz_dec_test_exit(void) 62.3412 -+{ 62.3413 -+ unregister_chrdev(device_major, DEVICE_NAME); 62.3414 -+ xz_dec_end(state); 62.3415 -+ printk(KERN_INFO DEVICE_NAME ": module unloaded\n"); 62.3416 -+} 62.3417 -+ 62.3418 -+module_init(xz_dec_test_init); 62.3419 -+module_exit(xz_dec_test_exit); 62.3420 -+ 62.3421 -+MODULE_DESCRIPTION("XZ decompressor tester"); 62.3422 -+MODULE_VERSION("1.0"); 62.3423 -+MODULE_AUTHOR("Lasse Collin <lasse.collin@tukaani.org>"); 62.3424 -+ 62.3425 -+/* 62.3426 -+ * This code is in the public domain, but in Linux it's simplest to just 62.3427 -+ * say it's GPL and consider the authors as the copyright holders. 62.3428 -+ */ 62.3429 -+MODULE_LICENSE("GPL"); 62.3430 -diff --git a/lib/xz/xz_lzma2.h b/lib/xz/xz_lzma2.h 62.3431 -new file mode 100644 62.3432 -index 0000000..071d67b 62.3433 ---- /dev/null 62.3434 -+++ b/lib/xz/xz_lzma2.h 62.3435 -@@ -0,0 +1,204 @@ 62.3436 -+/* 62.3437 -+ * LZMA2 definitions 62.3438 -+ * 62.3439 -+ * Authors: Lasse Collin <lasse.collin@tukaani.org> 62.3440 -+ * Igor Pavlov <http://7-zip.org/> 62.3441 -+ * 62.3442 -+ * This file has been put into the public domain. 62.3443 -+ * You can do whatever you want with this file. 62.3444 -+ */ 62.3445 -+ 62.3446 -+#ifndef XZ_LZMA2_H 62.3447 -+#define XZ_LZMA2_H 62.3448 -+ 62.3449 -+/* Range coder constants */ 62.3450 -+#define RC_SHIFT_BITS 8 62.3451 -+#define RC_TOP_BITS 24 62.3452 -+#define RC_TOP_VALUE (1 << RC_TOP_BITS) 62.3453 -+#define RC_BIT_MODEL_TOTAL_BITS 11 62.3454 -+#define RC_BIT_MODEL_TOTAL (1 << RC_BIT_MODEL_TOTAL_BITS) 62.3455 -+#define RC_MOVE_BITS 5 62.3456 -+ 62.3457 -+/* 62.3458 -+ * Maximum number of position states. A position state is the lowest pb 62.3459 -+ * number of bits of the current uncompressed offset. In some places there 62.3460 -+ * are different sets of probabilities for different position states. 62.3461 -+ */ 62.3462 -+#define POS_STATES_MAX (1 << 4) 62.3463 -+ 62.3464 -+/* 62.3465 -+ * This enum is used to track which LZMA symbols have occurred most recently 62.3466 -+ * and in which order. This information is used to predict the next symbol. 62.3467 -+ * 62.3468 -+ * Symbols: 62.3469 -+ * - Literal: One 8-bit byte 62.3470 -+ * - Match: Repeat a chunk of data at some distance 62.3471 -+ * - Long repeat: Multi-byte match at a recently seen distance 62.3472 -+ * - Short repeat: One-byte repeat at a recently seen distance 62.3473 -+ * 62.3474 -+ * The symbol names are in from STATE_oldest_older_previous. REP means 62.3475 -+ * either short or long repeated match, and NONLIT means any non-literal. 62.3476 -+ */ 62.3477 -+enum lzma_state { 62.3478 -+ STATE_LIT_LIT, 62.3479 -+ STATE_MATCH_LIT_LIT, 62.3480 -+ STATE_REP_LIT_LIT, 62.3481 -+ STATE_SHORTREP_LIT_LIT, 62.3482 -+ STATE_MATCH_LIT, 62.3483 -+ STATE_REP_LIT, 62.3484 -+ STATE_SHORTREP_LIT, 62.3485 -+ STATE_LIT_MATCH, 62.3486 -+ STATE_LIT_LONGREP, 62.3487 -+ STATE_LIT_SHORTREP, 62.3488 -+ STATE_NONLIT_MATCH, 62.3489 -+ STATE_NONLIT_REP 62.3490 -+}; 62.3491 -+ 62.3492 -+/* Total number of states */ 62.3493 -+#define STATES 12 62.3494 -+ 62.3495 -+/* The lowest 7 states indicate that the previous state was a literal. */ 62.3496 -+#define LIT_STATES 7 62.3497 -+ 62.3498 -+/* Indicate that the latest symbol was a literal. */ 62.3499 -+static inline void lzma_state_literal(enum lzma_state *state) 62.3500 -+{ 62.3501 -+ if (*state <= STATE_SHORTREP_LIT_LIT) 62.3502 -+ *state = STATE_LIT_LIT; 62.3503 -+ else if (*state <= STATE_LIT_SHORTREP) 62.3504 -+ *state -= 3; 62.3505 -+ else 62.3506 -+ *state -= 6; 62.3507 -+} 62.3508 -+ 62.3509 -+/* Indicate that the latest symbol was a match. */ 62.3510 -+static inline void lzma_state_match(enum lzma_state *state) 62.3511 -+{ 62.3512 -+ *state = *state < LIT_STATES ? STATE_LIT_MATCH : STATE_NONLIT_MATCH; 62.3513 -+} 62.3514 -+ 62.3515 -+/* Indicate that the latest state was a long repeated match. */ 62.3516 -+static inline void lzma_state_long_rep(enum lzma_state *state) 62.3517 -+{ 62.3518 -+ *state = *state < LIT_STATES ? STATE_LIT_LONGREP : STATE_NONLIT_REP; 62.3519 -+} 62.3520 -+ 62.3521 -+/* Indicate that the latest symbol was a short match. */ 62.3522 -+static inline void lzma_state_short_rep(enum lzma_state *state) 62.3523 -+{ 62.3524 -+ *state = *state < LIT_STATES ? STATE_LIT_SHORTREP : STATE_NONLIT_REP; 62.3525 -+} 62.3526 -+ 62.3527 -+/* Test if the previous symbol was a literal. */ 62.3528 -+static inline bool lzma_state_is_literal(enum lzma_state state) 62.3529 -+{ 62.3530 -+ return state < LIT_STATES; 62.3531 -+} 62.3532 -+ 62.3533 -+/* Each literal coder is divided in three sections: 62.3534 -+ * - 0x001-0x0FF: Without match byte 62.3535 -+ * - 0x101-0x1FF: With match byte; match bit is 0 62.3536 -+ * - 0x201-0x2FF: With match byte; match bit is 1 62.3537 -+ * 62.3538 -+ * Match byte is used when the previous LZMA symbol was something else than 62.3539 -+ * a literal (that is, it was some kind of match). 62.3540 -+ */ 62.3541 -+#define LITERAL_CODER_SIZE 0x300 62.3542 -+ 62.3543 -+/* Maximum number of literal coders */ 62.3544 -+#define LITERAL_CODERS_MAX (1 << 4) 62.3545 -+ 62.3546 -+/* Minimum length of a match is two bytes. */ 62.3547 -+#define MATCH_LEN_MIN 2 62.3548 -+ 62.3549 -+/* Match length is encoded with 4, 5, or 10 bits. 62.3550 -+ * 62.3551 -+ * Length Bits 62.3552 -+ * 2-9 4 = Choice=0 + 3 bits 62.3553 -+ * 10-17 5 = Choice=1 + Choice2=0 + 3 bits 62.3554 -+ * 18-273 10 = Choice=1 + Choice2=1 + 8 bits 62.3555 -+ */ 62.3556 -+#define LEN_LOW_BITS 3 62.3557 -+#define LEN_LOW_SYMBOLS (1 << LEN_LOW_BITS) 62.3558 -+#define LEN_MID_BITS 3 62.3559 -+#define LEN_MID_SYMBOLS (1 << LEN_MID_BITS) 62.3560 -+#define LEN_HIGH_BITS 8 62.3561 -+#define LEN_HIGH_SYMBOLS (1 << LEN_HIGH_BITS) 62.3562 -+#define LEN_SYMBOLS (LEN_LOW_SYMBOLS + LEN_MID_SYMBOLS + LEN_HIGH_SYMBOLS) 62.3563 -+ 62.3564 -+/* 62.3565 -+ * Maximum length of a match is 273 which is a result of the encoding 62.3566 -+ * described above. 62.3567 -+ */ 62.3568 -+#define MATCH_LEN_MAX (MATCH_LEN_MIN + LEN_SYMBOLS - 1) 62.3569 -+ 62.3570 -+/* 62.3571 -+ * Different sets of probabilities are used for match distances that have 62.3572 -+ * very short match length: Lengths of 2, 3, and 4 bytes have a separate 62.3573 -+ * set of probabilities for each length. The matches with longer length 62.3574 -+ * use a shared set of probabilities. 62.3575 -+ */ 62.3576 -+#define DIST_STATES 4 62.3577 -+ 62.3578 -+/* 62.3579 -+ * Get the index of the appropriate probability array for decoding 62.3580 -+ * the distance slot. 62.3581 -+ */ 62.3582 -+static inline uint32_t lzma_get_dist_state(uint32_t len) 62.3583 -+{ 62.3584 -+ return len < DIST_STATES + MATCH_LEN_MIN 62.3585 -+ ? len - MATCH_LEN_MIN : DIST_STATES - 1; 62.3586 -+} 62.3587 -+ 62.3588 -+/* 62.3589 -+ * The highest two bits of a 32-bit match distance are encoded using six bits. 62.3590 -+ * This six-bit value is called a distance slot. This way encoding a 32-bit 62.3591 -+ * value takes 6-36 bits, larger values taking more bits. 62.3592 -+ */ 62.3593 -+#define DIST_SLOT_BITS 6 62.3594 -+#define DIST_SLOTS (1 << DIST_SLOT_BITS) 62.3595 -+ 62.3596 -+/* Match distances up to 127 are fully encoded using probabilities. Since 62.3597 -+ * the highest two bits (distance slot) are always encoded using six bits, 62.3598 -+ * the distances 0-3 don't need any additional bits to encode, since the 62.3599 -+ * distance slot itself is the same as the actual distance. DIST_MODEL_START 62.3600 -+ * indicates the first distance slot where at least one additional bit is 62.3601 -+ * needed. 62.3602 -+ */ 62.3603 -+#define DIST_MODEL_START 4 62.3604 -+ 62.3605 -+/* 62.3606 -+ * Match distances greater than 127 are encoded in three pieces: 62.3607 -+ * - distance slot: the highest two bits 62.3608 -+ * - direct bits: 2-26 bits below the highest two bits 62.3609 -+ * - alignment bits: four lowest bits 62.3610 -+ * 62.3611 -+ * Direct bits don't use any probabilities. 62.3612 -+ * 62.3613 -+ * The distance slot value of 14 is for distances 128-191. 62.3614 -+ */ 62.3615 -+#define DIST_MODEL_END 14 62.3616 -+ 62.3617 -+/* Distance slots that indicate a distance <= 127. */ 62.3618 -+#define FULL_DISTANCES_BITS (DIST_MODEL_END / 2) 62.3619 -+#define FULL_DISTANCES (1 << FULL_DISTANCES_BITS) 62.3620 -+ 62.3621 -+/* 62.3622 -+ * For match distances greater than 127, only the highest two bits and the 62.3623 -+ * lowest four bits (alignment) is encoded using probabilities. 62.3624 -+ */ 62.3625 -+#define ALIGN_BITS 4 62.3626 -+#define ALIGN_SIZE (1 << ALIGN_BITS) 62.3627 -+#define ALIGN_MASK (ALIGN_SIZE - 1) 62.3628 -+ 62.3629 -+/* Total number of all probability variables */ 62.3630 -+#define PROBS_TOTAL (1846 + LITERAL_CODERS_MAX * LITERAL_CODER_SIZE) 62.3631 -+ 62.3632 -+/* 62.3633 -+ * LZMA remembers the four most recent match distances. Reusing these 62.3634 -+ * distances tends to take less space than re-encoding the actual 62.3635 -+ * distance value. 62.3636 -+ */ 62.3637 -+#define REPS 4 62.3638 -+ 62.3639 -+#endif 62.3640 -diff --git a/lib/xz/xz_private.h b/lib/xz/xz_private.h 62.3641 -new file mode 100644 62.3642 -index 0000000..a65633e 62.3643 ---- /dev/null 62.3644 -+++ b/lib/xz/xz_private.h 62.3645 -@@ -0,0 +1,156 @@ 62.3646 -+/* 62.3647 -+ * Private includes and definitions 62.3648 -+ * 62.3649 -+ * Author: Lasse Collin <lasse.collin@tukaani.org> 62.3650 -+ * 62.3651 -+ * This file has been put into the public domain. 62.3652 -+ * You can do whatever you want with this file. 62.3653 -+ */ 62.3654 -+ 62.3655 -+#ifndef XZ_PRIVATE_H 62.3656 -+#define XZ_PRIVATE_H 62.3657 -+ 62.3658 -+#ifdef __KERNEL__ 62.3659 -+# include <linux/xz.h> 62.3660 -+# include <asm/byteorder.h> 62.3661 -+# include <asm/unaligned.h> 62.3662 -+ /* XZ_PREBOOT may be defined only via decompress_unxz.c. */ 62.3663 -+# ifndef XZ_PREBOOT 62.3664 -+# include <linux/slab.h> 62.3665 -+# include <linux/vmalloc.h> 62.3666 -+# include <linux/string.h> 62.3667 -+# ifdef CONFIG_XZ_DEC_X86 62.3668 -+# define XZ_DEC_X86 62.3669 -+# endif 62.3670 -+# ifdef CONFIG_XZ_DEC_POWERPC 62.3671 -+# define XZ_DEC_POWERPC 62.3672 -+# endif 62.3673 -+# ifdef CONFIG_XZ_DEC_IA64 62.3674 -+# define XZ_DEC_IA64 62.3675 -+# endif 62.3676 -+# ifdef CONFIG_XZ_DEC_ARM 62.3677 -+# define XZ_DEC_ARM 62.3678 -+# endif 62.3679 -+# ifdef CONFIG_XZ_DEC_ARMTHUMB 62.3680 -+# define XZ_DEC_ARMTHUMB 62.3681 -+# endif 62.3682 -+# ifdef CONFIG_XZ_DEC_SPARC 62.3683 -+# define XZ_DEC_SPARC 62.3684 -+# endif 62.3685 -+# define memeq(a, b, size) (memcmp(a, b, size) == 0) 62.3686 -+# define memzero(buf, size) memset(buf, 0, size) 62.3687 -+# endif 62.3688 -+# define get_le32(p) le32_to_cpup((const uint32_t *)(p)) 62.3689 -+#else 62.3690 -+ /* 62.3691 -+ * For userspace builds, use a separate header to define the required 62.3692 -+ * macros and functions. This makes it easier to adapt the code into 62.3693 -+ * different environments and avoids clutter in the Linux kernel tree. 62.3694 -+ */ 62.3695 -+# include "xz_config.h" 62.3696 -+#endif 62.3697 -+ 62.3698 -+/* If no specific decoding mode is requested, enable support for all modes. */ 62.3699 -+#if !defined(XZ_DEC_SINGLE) && !defined(XZ_DEC_PREALLOC) \ 62.3700 -+ && !defined(XZ_DEC_DYNALLOC) 62.3701 -+# define XZ_DEC_SINGLE 62.3702 -+# define XZ_DEC_PREALLOC 62.3703 -+# define XZ_DEC_DYNALLOC 62.3704 -+#endif 62.3705 -+ 62.3706 -+/* 62.3707 -+ * The DEC_IS_foo(mode) macros are used in "if" statements. If only some 62.3708 -+ * of the supported modes are enabled, these macros will evaluate to true or 62.3709 -+ * false at compile time and thus allow the compiler to omit unneeded code. 62.3710 -+ */ 62.3711 -+#ifdef XZ_DEC_SINGLE 62.3712 -+# define DEC_IS_SINGLE(mode) ((mode) == XZ_SINGLE) 62.3713 -+#else 62.3714 -+# define DEC_IS_SINGLE(mode) (false) 62.3715 -+#endif 62.3716 -+ 62.3717 -+#ifdef XZ_DEC_PREALLOC 62.3718 -+# define DEC_IS_PREALLOC(mode) ((mode) == XZ_PREALLOC) 62.3719 -+#else 62.3720 -+# define DEC_IS_PREALLOC(mode) (false) 62.3721 -+#endif 62.3722 -+ 62.3723 -+#ifdef XZ_DEC_DYNALLOC 62.3724 -+# define DEC_IS_DYNALLOC(mode) ((mode) == XZ_DYNALLOC) 62.3725 -+#else 62.3726 -+# define DEC_IS_DYNALLOC(mode) (false) 62.3727 -+#endif 62.3728 -+ 62.3729 -+#if !defined(XZ_DEC_SINGLE) 62.3730 -+# define DEC_IS_MULTI(mode) (true) 62.3731 -+#elif defined(XZ_DEC_PREALLOC) || defined(XZ_DEC_DYNALLOC) 62.3732 -+# define DEC_IS_MULTI(mode) ((mode) != XZ_SINGLE) 62.3733 -+#else 62.3734 -+# define DEC_IS_MULTI(mode) (false) 62.3735 -+#endif 62.3736 -+ 62.3737 -+/* 62.3738 -+ * If any of the BCJ filter decoders are wanted, define XZ_DEC_BCJ. 62.3739 -+ * XZ_DEC_BCJ is used to enable generic support for BCJ decoders. 62.3740 -+ */ 62.3741 -+#ifndef XZ_DEC_BCJ 62.3742 -+# if defined(XZ_DEC_X86) || defined(XZ_DEC_POWERPC) \ 62.3743 -+ || defined(XZ_DEC_IA64) || defined(XZ_DEC_ARM) \ 62.3744 -+ || defined(XZ_DEC_ARM) || defined(XZ_DEC_ARMTHUMB) \ 62.3745 -+ || defined(XZ_DEC_SPARC) 62.3746 -+# define XZ_DEC_BCJ 62.3747 -+# endif 62.3748 -+#endif 62.3749 -+ 62.3750 -+/* 62.3751 -+ * Allocate memory for LZMA2 decoder. xz_dec_lzma2_reset() must be used 62.3752 -+ * before calling xz_dec_lzma2_run(). 62.3753 -+ */ 62.3754 -+XZ_EXTERN struct xz_dec_lzma2 *xz_dec_lzma2_create(enum xz_mode mode, 62.3755 -+ uint32_t dict_max); 62.3756 -+ 62.3757 -+/* 62.3758 -+ * Decode the LZMA2 properties (one byte) and reset the decoder. Return 62.3759 -+ * XZ_OK on success, XZ_MEMLIMIT_ERROR if the preallocated dictionary is not 62.3760 -+ * big enough, and XZ_OPTIONS_ERROR if props indicates something that this 62.3761 -+ * decoder doesn't support. 62.3762 -+ */ 62.3763 -+XZ_EXTERN enum xz_ret xz_dec_lzma2_reset(struct xz_dec_lzma2 *s, 62.3764 -+ uint8_t props); 62.3765 -+ 62.3766 -+/* Decode raw LZMA2 stream from b->in to b->out. */ 62.3767 -+XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2 *s, 62.3768 -+ struct xz_buf *b); 62.3769 -+ 62.3770 -+/* Free the memory allocated for the LZMA2 decoder. */ 62.3771 -+XZ_EXTERN void xz_dec_lzma2_end(struct xz_dec_lzma2 *s); 62.3772 -+ 62.3773 -+#ifdef XZ_DEC_BCJ 62.3774 -+/* 62.3775 -+ * Allocate memory for BCJ decoders. xz_dec_bcj_reset() must be used before 62.3776 -+ * calling xz_dec_bcj_run(). 62.3777 -+ */ 62.3778 -+XZ_EXTERN struct xz_dec_bcj *xz_dec_bcj_create(bool single_call); 62.3779 -+ 62.3780 -+/* 62.3781 -+ * Decode the Filter ID of a BCJ filter. This implementation doesn't 62.3782 -+ * support custom start offsets, so no decoding of Filter Properties 62.3783 -+ * is needed. Returns XZ_OK if the given Filter ID is supported. 62.3784 -+ * Otherwise XZ_OPTIONS_ERROR is returned. 62.3785 -+ */ 62.3786 -+XZ_EXTERN enum xz_ret xz_dec_bcj_reset(struct xz_dec_bcj *s, uint8_t id); 62.3787 -+ 62.3788 -+/* 62.3789 -+ * Decode raw BCJ + LZMA2 stream. This must be used only if there actually is 62.3790 -+ * a BCJ filter in the chain. If the chain has only LZMA2, xz_dec_lzma2_run() 62.3791 -+ * must be called directly. 62.3792 -+ */ 62.3793 -+XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s, 62.3794 -+ struct xz_dec_lzma2 *lzma2, 62.3795 -+ struct xz_buf *b); 62.3796 -+ 62.3797 -+/* Free the memory allocated for the BCJ filters. */ 62.3798 -+#define xz_dec_bcj_end(s) kfree(s) 62.3799 -+#endif 62.3800 -+ 62.3801 -+#endif 62.3802 -diff --git a/lib/xz/xz_stream.h b/lib/xz/xz_stream.h 62.3803 -new file mode 100644 62.3804 -index 0000000..66cb5a7 62.3805 ---- /dev/null 62.3806 -+++ b/lib/xz/xz_stream.h 62.3807 -@@ -0,0 +1,62 @@ 62.3808 -+/* 62.3809 -+ * Definitions for handling the .xz file format 62.3810 -+ * 62.3811 -+ * Author: Lasse Collin <lasse.collin@tukaani.org> 62.3812 -+ * 62.3813 -+ * This file has been put into the public domain. 62.3814 -+ * You can do whatever you want with this file. 62.3815 -+ */ 62.3816 -+ 62.3817 -+#ifndef XZ_STREAM_H 62.3818 -+#define XZ_STREAM_H 62.3819 -+ 62.3820 -+#if defined(__KERNEL__) && !XZ_INTERNAL_CRC32 62.3821 -+# include <linux/crc32.h> 62.3822 -+# undef crc32 62.3823 -+# define xz_crc32(buf, size, crc) \ 62.3824 -+ (~crc32_le(~(uint32_t)(crc), buf, size)) 62.3825 -+#endif 62.3826 -+ 62.3827 -+/* 62.3828 -+ * See the .xz file format specification at 62.3829 -+ * http://tukaani.org/xz/xz-file-format.txt 62.3830 -+ * to understand the container format. 62.3831 -+ */ 62.3832 -+ 62.3833 -+#define STREAM_HEADER_SIZE 12 62.3834 -+ 62.3835 -+#define HEADER_MAGIC "\3757zXZ" 62.3836 -+#define HEADER_MAGIC_SIZE 6 62.3837 -+ 62.3838 -+#define FOOTER_MAGIC "YZ" 62.3839 -+#define FOOTER_MAGIC_SIZE 2 62.3840 -+ 62.3841 -+/* 62.3842 -+ * Variable-length integer can hold a 63-bit unsigned integer or a special 62.3843 -+ * value indicating that the value is unknown. 62.3844 -+ * 62.3845 -+ * Experimental: vli_type can be defined to uint32_t to save a few bytes 62.3846 -+ * in code size (no effect on speed). Doing so limits the uncompressed and 62.3847 -+ * compressed size of the file to less than 256 MiB and may also weaken 62.3848 -+ * error detection slightly. 62.3849 -+ */ 62.3850 -+typedef uint64_t vli_type; 62.3851 -+ 62.3852 -+#define VLI_MAX ((vli_type)-1 / 2) 62.3853 -+#define VLI_UNKNOWN ((vli_type)-1) 62.3854 -+ 62.3855 -+/* Maximum encoded size of a VLI */ 62.3856 -+#define VLI_BYTES_MAX (sizeof(vli_type) * 8 / 7) 62.3857 -+ 62.3858 -+/* Integrity Check types */ 62.3859 -+enum xz_check { 62.3860 -+ XZ_CHECK_NONE = 0, 62.3861 -+ XZ_CHECK_CRC32 = 1, 62.3862 -+ XZ_CHECK_CRC64 = 4, 62.3863 -+ XZ_CHECK_SHA256 = 10 62.3864 -+}; 62.3865 -+ 62.3866 -+/* Maximum possible Check ID */ 62.3867 -+#define XZ_CHECK_MAX 15 62.3868 -+ 62.3869 -+#endif 62.3870 -diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib 62.3871 -index 54fd1b7..b862007 100644 62.3872 ---- a/scripts/Makefile.lib 62.3873 -+++ b/scripts/Makefile.lib 62.3874 -@@ -246,6 +246,34 @@ cmd_lzo = (cat $(filter-out FORCE,$^) | \ 62.3875 - lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 62.3876 - (rm -f $@ ; false) 62.3877 - 62.3878 -+# XZ 62.3879 -+# --------------------------------------------------------------------------- 62.3880 -+# Use xzkern to compress the kernel image and xzmisc to compress other things. 62.3881 -+# 62.3882 -+# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage 62.3883 -+# of the kernel decompressor. A BCJ filter is used if it is available for 62.3884 -+# the target architecture. xzkern also appends uncompressed size of the data 62.3885 -+# using size_append. The .xz format has the size information available at 62.3886 -+# the end of the file too, but it's in more complex format and it's good to 62.3887 -+# avoid changing the part of the boot code that reads the uncompressed size. 62.3888 -+# Note that the bytes added by size_append will make the xz tool think that 62.3889 -+# the file is corrupt. This is expected. 62.3890 -+# 62.3891 -+# xzmisc doesn't use size_append, so it can be used to create normal .xz 62.3892 -+# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very 62.3893 -+# big dictionary would increase the memory usage too much in the multi-call 62.3894 -+# decompression mode. A BCJ filter isn't used either. 62.3895 -+quiet_cmd_xzkern = XZKERN $@ 62.3896 -+cmd_xzkern = (cat $(filter-out FORCE,$^) | \ 62.3897 -+ sh $(srctree)/scripts/xz_wrap.sh && \ 62.3898 -+ $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 62.3899 -+ (rm -f $@ ; false) 62.3900 -+ 62.3901 -+quiet_cmd_xzmisc = XZMISC $@ 62.3902 -+cmd_xzmisc = (cat $(filter-out FORCE,$^) | \ 62.3903 -+ xz --check=crc32 --lzma2=dict=1MiB) > $@ || \ 62.3904 -+ (rm -f $@ ; false) 62.3905 -+ 62.3906 - # misc stuff 62.3907 - # --------------------------------------------------------------------------- 62.3908 - quote:=" 62.3909 -diff --git a/scripts/xz_wrap.sh b/scripts/xz_wrap.sh 62.3910 -new file mode 100644 62.3911 -index 0000000..17a5798 62.3912 ---- /dev/null 62.3913 -+++ b/scripts/xz_wrap.sh 62.3914 -@@ -0,0 +1,23 @@ 62.3915 -+#!/bin/sh 62.3916 -+# 62.3917 -+# This is a wrapper for xz to compress the kernel image using appropriate 62.3918 -+# compression options depending on the architecture. 62.3919 -+# 62.3920 -+# Author: Lasse Collin <lasse.collin@tukaani.org> 62.3921 -+# 62.3922 -+# This file has been put into the public domain. 62.3923 -+# You can do whatever you want with this file. 62.3924 -+# 62.3925 -+ 62.3926 -+BCJ= 62.3927 -+LZMA2OPTS= 62.3928 -+ 62.3929 -+case $ARCH in 62.3930 -+ x86|x86_64) BCJ=--x86 ;; 62.3931 -+ powerpc) BCJ=--powerpc ;; 62.3932 -+ ia64) BCJ=--ia64; LZMA2OPTS=pb=4 ;; 62.3933 -+ arm) BCJ=--arm ;; 62.3934 -+ sparc) BCJ=--sparc ;; 62.3935 -+esac 62.3936 -+ 62.3937 -+exec xz --check=crc32 $BCJ --lzma2=$LZMA2OPTS,dict=32MiB
63.1 --- a/kernel-modular/stuff/002-squashfs-decompressors-add-boot-time-xz-support.patch Thu Jul 18 13:24:21 2013 +0000 63.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 63.3 @@ -1,638 +0,0 @@ 63.4 -From: Lasse Collin <lasse.collin@tukaani.org> 63.5 -Date: Thu, 2 Dec 2010 19:14:37 +0000 (+0200) 63.6 -Subject: Decompressors: Add boot-time XZ support 63.7 -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fpkl%2Fsquashfs-xz.git;a=commitdiff_plain;h=c64bc9a229b46db75d7761601dd8ca25385a7780 63.8 - 63.9 -Decompressors: Add boot-time XZ support 63.10 - 63.11 -This implements the API defined in <linux/decompress/generic.h> 63.12 -which is used for kernel, initramfs, and initrd decompression. 63.13 -This patch together with the first patch is enough for 63.14 -XZ-compressed initramfs and initrd; XZ-compressed kernel will 63.15 -need arch-specific changes. 63.16 - 63.17 -In contrast to other initramfs compression methods, support for 63.18 -XZ-compressed initramfs is not enabled by default in usr/Kconfig. 63.19 -This is primarily due to the Kconfig options of the xz_dec 63.20 -module. It can be good to require that xz_dec is enabled 63.21 -separately so the user can select only the BCJ filters he needs 63.22 -when EMBEDDED=y. 63.23 - 63.24 -The buffering requirements described in decompress_unxz.c are 63.25 -stricter than with gzip, so the relevant changes should be done 63.26 -to the arch-specific code when adding support for XZ-compressed 63.27 -kernel. Similarly, the heap size in arch-specific pre-boot code 63.28 -may need to be increased (30 KiB is enough). 63.29 - 63.30 -The XZ decompressor needs memmove(), memeq() (memcmp() == 0), 63.31 -and memzero() (memset(ptr, 0, size)), which aren't available in 63.32 -all arch-specific pre-boot environments. I'm including simple 63.33 -versions in decompress_unxz.c, but a cleaner solution would 63.34 -naturally be nicer. 63.35 - 63.36 -Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> 63.37 ---- 63.38 - 63.39 -diff --git a/include/linux/decompress/unxz.h b/include/linux/decompress/unxz.h 63.40 -new file mode 100644 63.41 -index 0000000..41728fc 63.42 ---- /dev/null 63.43 -+++ b/include/linux/decompress/unxz.h 63.44 -@@ -0,0 +1,19 @@ 63.45 -+/* 63.46 -+ * Wrapper for decompressing XZ-compressed kernel, initramfs, and initrd 63.47 -+ * 63.48 -+ * Author: Lasse Collin <lasse.collin@tukaani.org> 63.49 -+ * 63.50 -+ * This file has been put into the public domain. 63.51 -+ * You can do whatever you want with this file. 63.52 -+ */ 63.53 -+ 63.54 -+#ifndef DECOMPRESS_UNXZ_H 63.55 -+#define DECOMPRESS_UNXZ_H 63.56 -+ 63.57 -+int unxz(unsigned char *in, int in_size, 63.58 -+ int (*fill)(void *dest, unsigned int size), 63.59 -+ int (*flush)(void *src, unsigned int size), 63.60 -+ unsigned char *out, int *in_used, 63.61 -+ void (*error)(char *x)); 63.62 -+ 63.63 -+#endif 63.64 -diff --git a/init/Kconfig b/init/Kconfig 63.65 -index 2de5b1c..d9fbb0f 100644 63.66 ---- a/init/Kconfig 63.67 -+++ b/init/Kconfig 63.68 -@@ -123,13 +123,16 @@ config HAVE_KERNEL_BZIP2 63.69 - config HAVE_KERNEL_LZMA 63.70 - bool 63.71 - 63.72 -+config HAVE_KERNEL_XZ 63.73 -+ bool 63.74 -+ 63.75 - config HAVE_KERNEL_LZO 63.76 - bool 63.77 - 63.78 - choice 63.79 - prompt "Kernel compression mode" 63.80 - default KERNEL_GZIP 63.81 -- depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO 63.82 -+ depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO 63.83 - help 63.84 - The linux kernel is a kind of self-extracting executable. 63.85 - Several compression algorithms are available, which differ 63.86 -@@ -174,6 +177,21 @@ config KERNEL_LZMA 63.87 - two. Compression is slowest. The kernel size is about 33% 63.88 - smaller with LZMA in comparison to gzip. 63.89 - 63.90 -+config KERNEL_XZ 63.91 -+ bool "XZ" 63.92 -+ depends on HAVE_KERNEL_XZ 63.93 -+ help 63.94 -+ XZ uses the LZMA2 algorithm and instruction set specific 63.95 -+ BCJ filters which can improve compression ratio of executable 63.96 -+ code. The size of the kernel is about 30% smaller with XZ in 63.97 -+ comparison to gzip. On architectures for which there is a BCJ 63.98 -+ filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ 63.99 -+ will create a few percent smaller kernel than plain LZMA. 63.100 -+ 63.101 -+ The speed is about the same as with LZMA: The decompression 63.102 -+ speed of XZ is better than that of bzip2 but worse than gzip 63.103 -+ and LZO. Compression is slow. 63.104 -+ 63.105 - config KERNEL_LZO 63.106 - bool "LZO" 63.107 - depends on HAVE_KERNEL_LZO 63.108 -diff --git a/lib/Kconfig b/lib/Kconfig 63.109 -index 6090314..45960e1 100644 63.110 ---- a/lib/Kconfig 63.111 -+++ b/lib/Kconfig 63.112 -@@ -122,6 +122,9 @@ config DECOMPRESS_BZIP2 63.113 - config DECOMPRESS_LZMA 63.114 - tristate 63.115 - 63.116 -+config DECOMPRESS_XZ 63.117 -+ tristate 63.118 -+ 63.119 - config DECOMPRESS_LZO 63.120 - select LZO_DECOMPRESS 63.121 - tristate 63.122 -diff --git a/lib/Makefile b/lib/Makefile 63.123 -index f2f98dd..06e3d8a 100644 63.124 ---- a/lib/Makefile 63.125 -+++ b/lib/Makefile 63.126 -@@ -75,6 +75,7 @@ obj-$(CONFIG_RAID6_PQ) += raid6/ 63.127 - lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o 63.128 - lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o 63.129 - lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o 63.130 -+lib-$(CONFIG_DECOMPRESS_XZ) += decompress_unxz.o 63.131 - lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o 63.132 - 63.133 - obj-$(CONFIG_TEXTSEARCH) += textsearch.o 63.134 -diff --git a/lib/decompress.c b/lib/decompress.c 63.135 -index a760681..3d766b7 100644 63.136 ---- a/lib/decompress.c 63.137 -+++ b/lib/decompress.c 63.138 -@@ -8,6 +8,7 @@ 63.139 - 63.140 - #include <linux/decompress/bunzip2.h> 63.141 - #include <linux/decompress/unlzma.h> 63.142 -+#include <linux/decompress/unxz.h> 63.143 - #include <linux/decompress/inflate.h> 63.144 - #include <linux/decompress/unlzo.h> 63.145 - 63.146 -@@ -23,6 +24,9 @@ 63.147 - #ifndef CONFIG_DECOMPRESS_LZMA 63.148 - # define unlzma NULL 63.149 - #endif 63.150 -+#ifndef CONFIG_DECOMPRESS_XZ 63.151 -+# define unxz NULL 63.152 -+#endif 63.153 - #ifndef CONFIG_DECOMPRESS_LZO 63.154 - # define unlzo NULL 63.155 - #endif 63.156 -@@ -36,6 +40,7 @@ static const struct compress_format { 63.157 - { {037, 0236}, "gzip", gunzip }, 63.158 - { {0x42, 0x5a}, "bzip2", bunzip2 }, 63.159 - { {0x5d, 0x00}, "lzma", unlzma }, 63.160 -+ { {0xfd, 0x37}, "xz", unxz }, 63.161 - { {0x89, 0x4c}, "lzo", unlzo }, 63.162 - { {0, 0}, NULL, NULL } 63.163 - }; 63.164 -diff --git a/lib/decompress_unxz.c b/lib/decompress_unxz.c 63.165 -new file mode 100644 63.166 -index 0000000..cecd23d 63.167 ---- /dev/null 63.168 -+++ b/lib/decompress_unxz.c 63.169 -@@ -0,0 +1,397 @@ 63.170 -+/* 63.171 -+ * Wrapper for decompressing XZ-compressed kernel, initramfs, and initrd 63.172 -+ * 63.173 -+ * Author: Lasse Collin <lasse.collin@tukaani.org> 63.174 -+ * 63.175 -+ * This file has been put into the public domain. 63.176 -+ * You can do whatever you want with this file. 63.177 -+ */ 63.178 -+ 63.179 -+/* 63.180 -+ * Important notes about in-place decompression 63.181 -+ * 63.182 -+ * At least on x86, the kernel is decompressed in place: the compressed data 63.183 -+ * is placed to the end of the output buffer, and the decompressor overwrites 63.184 -+ * most of the compressed data. There must be enough safety margin to 63.185 -+ * guarantee that the write position is always behind the read position. 63.186 -+ * 63.187 -+ * The safety margin for XZ with LZMA2 or BCJ+LZMA2 is calculated below. 63.188 -+ * Note that the margin with XZ is bigger than with Deflate (gzip)! 63.189 -+ * 63.190 -+ * The worst case for in-place decompression is that the beginning of 63.191 -+ * the file is compressed extremely well, and the rest of the file is 63.192 -+ * uncompressible. Thus, we must look for worst-case expansion when the 63.193 -+ * compressor is encoding uncompressible data. 63.194 -+ * 63.195 -+ * The structure of the .xz file in case of a compresed kernel is as follows. 63.196 -+ * Sizes (as bytes) of the fields are in parenthesis. 63.197 -+ * 63.198 -+ * Stream Header (12) 63.199 -+ * Block Header: 63.200 -+ * Block Header (8-12) 63.201 -+ * Compressed Data (N) 63.202 -+ * Block Padding (0-3) 63.203 -+ * CRC32 (4) 63.204 -+ * Index (8-20) 63.205 -+ * Stream Footer (12) 63.206 -+ * 63.207 -+ * Normally there is exactly one Block, but let's assume that there are 63.208 -+ * 2-4 Blocks just in case. Because Stream Header and also Block Header 63.209 -+ * of the first Block don't make the decompressor produce any uncompressed 63.210 -+ * data, we can ignore them from our calculations. Block Headers of possible 63.211 -+ * additional Blocks have to be taken into account still. With these 63.212 -+ * assumptions, it is safe to assume that the total header overhead is 63.213 -+ * less than 128 bytes. 63.214 -+ * 63.215 -+ * Compressed Data contains LZMA2 or BCJ+LZMA2 encoded data. Since BCJ 63.216 -+ * doesn't change the size of the data, it is enough to calculate the 63.217 -+ * safety margin for LZMA2. 63.218 -+ * 63.219 -+ * LZMA2 stores the data in chunks. Each chunk has a header whose size is 63.220 -+ * a maximum of 6 bytes, but to get round 2^n numbers, let's assume that 63.221 -+ * the maximum chunk header size is 8 bytes. After the chunk header, there 63.222 -+ * may be up to 64 KiB of actual payload in the chunk. Often the payload is 63.223 -+ * quite a bit smaller though; to be safe, let's assume that an average 63.224 -+ * chunk has only 32 KiB of payload. 63.225 -+ * 63.226 -+ * The maximum uncompressed size of the payload is 2 MiB. The minimum 63.227 -+ * uncompressed size of the payload is in practice never less than the 63.228 -+ * payload size itself. The LZMA2 format would allow uncompressed size 63.229 -+ * to be less than the payload size, but no sane compressor creates such 63.230 -+ * files. LZMA2 supports storing uncompressible data in uncompressed form, 63.231 -+ * so there's never a need to create payloads whose uncompressed size is 63.232 -+ * smaller than the compressed size. 63.233 -+ * 63.234 -+ * The assumption, that the uncompressed size of the payload is never 63.235 -+ * smaller than the payload itself, is valid only when talking about 63.236 -+ * the payload as a whole. It is possible that the payload has parts where 63.237 -+ * the decompressor consumes more input than it produces output. Calculating 63.238 -+ * the worst case for this would be tricky. Instead of trying to do that, 63.239 -+ * let's simply make sure that the decompressor never overwrites any bytes 63.240 -+ * of the payload which it is currently reading. 63.241 -+ * 63.242 -+ * Now we have enough information to calculate the safety margin. We need 63.243 -+ * - 128 bytes for the .xz file format headers; 63.244 -+ * - 8 bytes per every 32 KiB of uncompressed size (one LZMA2 chunk header 63.245 -+ * per chunk, each chunk having average payload size of 32 KiB); and 63.246 -+ * - 64 KiB (biggest possible LZMA2 chunk payload size) to make sure that 63.247 -+ * the decompressor never overwrites anything from the LZMA2 chunk 63.248 -+ * payload it is currently reading. 63.249 -+ * 63.250 -+ * We get the following formula: 63.251 -+ * 63.252 -+ * safety_margin = 128 + uncompressed_size * 8 / 32768 + 65536 63.253 -+ * = 128 + (uncompressed_size >> 12) + 65536 63.254 -+ * 63.255 -+ * For comparision, according to arch/x86/boot/compressed/misc.c, the 63.256 -+ * equivalent formula for Deflate is this: 63.257 -+ * 63.258 -+ * safety_margin = 18 + (uncompressed_size >> 12) + 32768 63.259 -+ * 63.260 -+ * Thus, when updating Deflate-only in-place kernel decompressor to 63.261 -+ * support XZ, the fixed overhead has to be increased from 18+32768 bytes 63.262 -+ * to 128+65536 bytes. 63.263 -+ */ 63.264 -+ 63.265 -+/* 63.266 -+ * STATIC is defined to "static" if we are being built for kernel 63.267 -+ * decompression (pre-boot code). <linux/decompress/mm.h> will define 63.268 -+ * STATIC to empty if it wasn't already defined. Since we will need to 63.269 -+ * know later if we are being used for kernel decompression, we define 63.270 -+ * XZ_PREBOOT here. 63.271 -+ */ 63.272 -+#ifdef STATIC 63.273 -+# define XZ_PREBOOT 63.274 -+#endif 63.275 -+#ifdef __KERNEL__ 63.276 -+# include <linux/decompress/mm.h> 63.277 -+#endif 63.278 -+#define XZ_EXTERN STATIC 63.279 -+ 63.280 -+#ifndef XZ_PREBOOT 63.281 -+# include <linux/slab.h> 63.282 -+# include <linux/xz.h> 63.283 -+#else 63.284 -+/* 63.285 -+ * Use the internal CRC32 code instead of kernel's CRC32 module, which 63.286 -+ * is not available in early phase of booting. 63.287 -+ */ 63.288 -+#define XZ_INTERNAL_CRC32 1 63.289 -+ 63.290 -+/* 63.291 -+ * For boot time use, we enable only the BCJ filter of the current 63.292 -+ * architecture or none if no BCJ filter is available for the architecture. 63.293 -+ */ 63.294 -+#ifdef CONFIG_X86 63.295 -+# define XZ_DEC_X86 63.296 -+#endif 63.297 -+#ifdef CONFIG_PPC 63.298 -+# define XZ_DEC_POWERPC 63.299 -+#endif 63.300 -+#ifdef CONFIG_ARM 63.301 -+# define XZ_DEC_ARM 63.302 -+#endif 63.303 -+#ifdef CONFIG_IA64 63.304 -+# define XZ_DEC_IA64 63.305 -+#endif 63.306 -+#ifdef CONFIG_SPARC 63.307 -+# define XZ_DEC_SPARC 63.308 -+#endif 63.309 -+ 63.310 -+/* 63.311 -+ * This will get the basic headers so that memeq() and others 63.312 -+ * can be defined. 63.313 -+ */ 63.314 -+#include "xz/xz_private.h" 63.315 -+ 63.316 -+/* 63.317 -+ * Replace the normal allocation functions with the versions from 63.318 -+ * <linux/decompress/mm.h>. vfree() needs to support vfree(NULL) 63.319 -+ * when XZ_DYNALLOC is used, but the pre-boot free() doesn't support it. 63.320 -+ * Workaround it here because the other decompressors don't need it. 63.321 -+ */ 63.322 -+#undef kmalloc 63.323 -+#undef kfree 63.324 -+#undef vmalloc 63.325 -+#undef vfree 63.326 -+#define kmalloc(size, flags) malloc(size) 63.327 -+#define kfree(ptr) free(ptr) 63.328 -+#define vmalloc(size) malloc(size) 63.329 -+#define vfree(ptr) do { if (ptr != NULL) free(ptr); } while (0) 63.330 -+ 63.331 -+/* 63.332 -+ * FIXME: Not all basic memory functions are provided in architecture-specific 63.333 -+ * files (yet). We define our own versions here for now, but this should be 63.334 -+ * only a temporary solution. 63.335 -+ * 63.336 -+ * memeq and memzero are not used much and any remotely sane implementation 63.337 -+ * is fast enough. memcpy/memmove speed matters in multi-call mode, but 63.338 -+ * the kernel image is decompressed in single-call mode, in which only 63.339 -+ * memcpy speed can matter and only if there is a lot of uncompressible data 63.340 -+ * (LZMA2 stores uncompressible chunks in uncompressed form). Thus, the 63.341 -+ * functions below should just be kept small; it's probably not worth 63.342 -+ * optimizing for speed. 63.343 -+ */ 63.344 -+ 63.345 -+#ifndef memeq 63.346 -+static bool memeq(const void *a, const void *b, size_t size) 63.347 -+{ 63.348 -+ const uint8_t *x = a; 63.349 -+ const uint8_t *y = b; 63.350 -+ size_t i; 63.351 -+ 63.352 -+ for (i = 0; i < size; ++i) 63.353 -+ if (x[i] != y[i]) 63.354 -+ return false; 63.355 -+ 63.356 -+ return true; 63.357 -+} 63.358 -+#endif 63.359 -+ 63.360 -+#ifndef memzero 63.361 -+static void memzero(void *buf, size_t size) 63.362 -+{ 63.363 -+ uint8_t *b = buf; 63.364 -+ uint8_t *e = b + size; 63.365 -+ 63.366 -+ while (b != e) 63.367 -+ *b++ = '\0'; 63.368 -+} 63.369 -+#endif 63.370 -+ 63.371 -+#ifndef memmove 63.372 -+/* Not static to avoid a conflict with the prototype in the Linux headers. */ 63.373 -+void *memmove(void *dest, const void *src, size_t size) 63.374 -+{ 63.375 -+ uint8_t *d = dest; 63.376 -+ const uint8_t *s = src; 63.377 -+ size_t i; 63.378 -+ 63.379 -+ if (d < s) { 63.380 -+ for (i = 0; i < size; ++i) 63.381 -+ d[i] = s[i]; 63.382 -+ } else if (d > s) { 63.383 -+ i = size; 63.384 -+ while (i-- > 0) 63.385 -+ d[i] = s[i]; 63.386 -+ } 63.387 -+ 63.388 -+ return dest; 63.389 -+} 63.390 -+#endif 63.391 -+ 63.392 -+/* 63.393 -+ * Since we need memmove anyway, would use it as memcpy too. 63.394 -+ * Commented out for now to avoid breaking things. 63.395 -+ */ 63.396 -+/* 63.397 -+#ifndef memcpy 63.398 -+# define memcpy memmove 63.399 -+#endif 63.400 -+*/ 63.401 -+ 63.402 -+#include "xz/xz_crc32.c" 63.403 -+#include "xz/xz_dec_stream.c" 63.404 -+#include "xz/xz_dec_lzma2.c" 63.405 -+#include "xz/xz_dec_bcj.c" 63.406 -+ 63.407 -+#endif /* XZ_PREBOOT */ 63.408 -+ 63.409 -+/* Size of the input and output buffers in multi-call mode */ 63.410 -+#define XZ_IOBUF_SIZE 4096 63.411 -+ 63.412 -+/* 63.413 -+ * This function implements the API defined in <linux/decompress/generic.h>. 63.414 -+ * 63.415 -+ * This wrapper will automatically choose single-call or multi-call mode 63.416 -+ * of the native XZ decoder API. The single-call mode can be used only when 63.417 -+ * both input and output buffers are available as a single chunk, i.e. when 63.418 -+ * fill() and flush() won't be used. 63.419 -+ */ 63.420 -+STATIC int INIT unxz(unsigned char *in, int in_size, 63.421 -+ int (*fill)(void *dest, unsigned int size), 63.422 -+ int (*flush)(void *src, unsigned int size), 63.423 -+ unsigned char *out, int *in_used, 63.424 -+ void (*error)(char *x)) 63.425 -+{ 63.426 -+ struct xz_buf b; 63.427 -+ struct xz_dec *s; 63.428 -+ enum xz_ret ret; 63.429 -+ bool must_free_in = false; 63.430 -+ 63.431 -+#if XZ_INTERNAL_CRC32 63.432 -+ xz_crc32_init(); 63.433 -+#endif 63.434 -+ 63.435 -+ if (in_used != NULL) 63.436 -+ *in_used = 0; 63.437 -+ 63.438 -+ if (fill == NULL && flush == NULL) 63.439 -+ s = xz_dec_init(XZ_SINGLE, 0); 63.440 -+ else 63.441 -+ s = xz_dec_init(XZ_DYNALLOC, (uint32_t)-1); 63.442 -+ 63.443 -+ if (s == NULL) 63.444 -+ goto error_alloc_state; 63.445 -+ 63.446 -+ if (flush == NULL) { 63.447 -+ b.out = out; 63.448 -+ b.out_size = (size_t)-1; 63.449 -+ } else { 63.450 -+ b.out_size = XZ_IOBUF_SIZE; 63.451 -+ b.out = malloc(XZ_IOBUF_SIZE); 63.452 -+ if (b.out == NULL) 63.453 -+ goto error_alloc_out; 63.454 -+ } 63.455 -+ 63.456 -+ if (in == NULL) { 63.457 -+ must_free_in = true; 63.458 -+ in = malloc(XZ_IOBUF_SIZE); 63.459 -+ if (in == NULL) 63.460 -+ goto error_alloc_in; 63.461 -+ } 63.462 -+ 63.463 -+ b.in = in; 63.464 -+ b.in_pos = 0; 63.465 -+ b.in_size = in_size; 63.466 -+ b.out_pos = 0; 63.467 -+ 63.468 -+ if (fill == NULL && flush == NULL) { 63.469 -+ ret = xz_dec_run(s, &b); 63.470 -+ } else { 63.471 -+ do { 63.472 -+ if (b.in_pos == b.in_size && fill != NULL) { 63.473 -+ if (in_used != NULL) 63.474 -+ *in_used += b.in_pos; 63.475 -+ 63.476 -+ b.in_pos = 0; 63.477 -+ 63.478 -+ in_size = fill(in, XZ_IOBUF_SIZE); 63.479 -+ if (in_size < 0) { 63.480 -+ /* 63.481 -+ * This isn't an optimal error code 63.482 -+ * but it probably isn't worth making 63.483 -+ * a new one either. 63.484 -+ */ 63.485 -+ ret = XZ_BUF_ERROR; 63.486 -+ break; 63.487 -+ } 63.488 -+ 63.489 -+ b.in_size = in_size; 63.490 -+ } 63.491 -+ 63.492 -+ ret = xz_dec_run(s, &b); 63.493 -+ 63.494 -+ if (flush != NULL && (b.out_pos == b.out_size 63.495 -+ || (ret != XZ_OK && b.out_pos > 0))) { 63.496 -+ /* 63.497 -+ * Setting ret here may hide an error 63.498 -+ * returned by xz_dec_run(), but probably 63.499 -+ * it's not too bad. 63.500 -+ */ 63.501 -+ if (flush(b.out, b.out_pos) != (int)b.out_pos) 63.502 -+ ret = XZ_BUF_ERROR; 63.503 -+ 63.504 -+ b.out_pos = 0; 63.505 -+ } 63.506 -+ } while (ret == XZ_OK); 63.507 -+ 63.508 -+ if (must_free_in) 63.509 -+ free(in); 63.510 -+ 63.511 -+ if (flush != NULL) 63.512 -+ free(b.out); 63.513 -+ } 63.514 -+ 63.515 -+ if (in_used != NULL) 63.516 -+ *in_used += b.in_pos; 63.517 -+ 63.518 -+ xz_dec_end(s); 63.519 -+ 63.520 -+ switch (ret) { 63.521 -+ case XZ_STREAM_END: 63.522 -+ return 0; 63.523 -+ 63.524 -+ case XZ_MEM_ERROR: 63.525 -+ /* This can occur only in multi-call mode. */ 63.526 -+ error("XZ decompressor ran out of memory"); 63.527 -+ break; 63.528 -+ 63.529 -+ case XZ_FORMAT_ERROR: 63.530 -+ error("Input is not in the XZ format (wrong magic bytes)"); 63.531 -+ break; 63.532 -+ 63.533 -+ case XZ_OPTIONS_ERROR: 63.534 -+ error("Input was encoded with settings that are not " 63.535 -+ "supported by this XZ decoder"); 63.536 -+ break; 63.537 -+ 63.538 -+ case XZ_DATA_ERROR: 63.539 -+ case XZ_BUF_ERROR: 63.540 -+ error("XZ-compressed data is corrupt"); 63.541 -+ break; 63.542 -+ 63.543 -+ default: 63.544 -+ error("Bug in the XZ decompressor"); 63.545 -+ break; 63.546 -+ } 63.547 -+ 63.548 -+ return -1; 63.549 -+ 63.550 -+error_alloc_in: 63.551 -+ if (flush != NULL) 63.552 -+ free(b.out); 63.553 -+ 63.554 -+error_alloc_out: 63.555 -+ xz_dec_end(s); 63.556 -+ 63.557 -+error_alloc_state: 63.558 -+ error("XZ decompressor ran out of memory"); 63.559 -+ return -1; 63.560 -+} 63.561 -+ 63.562 -+/* 63.563 -+ * This macro is used by architecture-specific files to decompress 63.564 -+ * the kernel image. 63.565 -+ */ 63.566 -+#define decompress unxz 63.567 -diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh 63.568 -index 5958fff..55caecd 100644 63.569 ---- a/scripts/gen_initramfs_list.sh 63.570 -+++ b/scripts/gen_initramfs_list.sh 63.571 -@@ -243,6 +243,8 @@ case "$arg" in 63.572 - echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f" 63.573 - echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f" 63.574 - echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f" 63.575 -+ echo "$output_file" | grep -q "\.xz$" && \ 63.576 -+ compr="xz --check=crc32 --lzma2=dict=1MiB" 63.577 - echo "$output_file" | grep -q "\.lzo$" && compr="lzop -9 -f" 63.578 - echo "$output_file" | grep -q "\.cpio$" && compr="cat" 63.579 - shift 63.580 -diff --git a/usr/Kconfig b/usr/Kconfig 63.581 -index e2721f5..9f51a29 100644 63.582 ---- a/usr/Kconfig 63.583 -+++ b/usr/Kconfig 63.584 -@@ -72,6 +72,18 @@ config RD_LZMA 63.585 - Support loading of a LZMA encoded initial ramdisk or cpio buffer 63.586 - If unsure, say N. 63.587 - 63.588 -+config RD_XZ 63.589 -+ bool "Support initial ramdisks compressed using XZ" 63.590 -+ depends on BLK_DEV_INITRD && XZ_DEC=y 63.591 -+ select DECOMPRESS_XZ 63.592 -+ help 63.593 -+ Support loading of a XZ encoded initial ramdisk or cpio buffer. 63.594 -+ 63.595 -+ If this option is inactive, say Y to "XZ decompression support" 63.596 -+ under "Library routines" first. 63.597 -+ 63.598 -+ If unsure, say N. 63.599 -+ 63.600 - config RD_LZO 63.601 - bool "Support initial ramdisks compressed using LZO" if EMBEDDED 63.602 - default !EMBEDDED 63.603 -@@ -139,6 +151,15 @@ config INITRAMFS_COMPRESSION_LZMA 63.604 - three. Compression is slowest. The initramfs size is about 33% 63.605 - smaller with LZMA in comparison to gzip. 63.606 - 63.607 -+config INITRAMFS_COMPRESSION_XZ 63.608 -+ bool "XZ" 63.609 -+ depends on RD_XZ 63.610 -+ help 63.611 -+ XZ uses the LZMA2 algorithm. The initramfs size is about 30% 63.612 -+ smaller with XZ in comparison to gzip. Decompression speed 63.613 -+ is better than that of bzip2 but worse than gzip and LZO. 63.614 -+ Compression is slow. 63.615 -+ 63.616 - config INITRAMFS_COMPRESSION_LZO 63.617 - bool "LZO" 63.618 - depends on RD_LZO 63.619 -diff --git a/usr/Makefile b/usr/Makefile 63.620 -index 6b4b6da..5845a13 100644 63.621 ---- a/usr/Makefile 63.622 -+++ b/usr/Makefile 63.623 -@@ -15,6 +15,9 @@ suffix_$(CONFIG_INITRAMFS_COMPRESSION_BZIP2) = .bz2 63.624 - # Lzma 63.625 - suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZMA) = .lzma 63.626 - 63.627 -+# XZ 63.628 -+suffix_$(CONFIG_INITRAMFS_COMPRESSION_XZ) = .xz 63.629 -+ 63.630 - # Lzo 63.631 - suffix_$(CONFIG_INITRAMFS_COMPRESSION_LZO) = .lzo 63.632 - 63.633 -@@ -48,7 +51,7 @@ endif 63.634 - quiet_cmd_initfs = GEN $@ 63.635 - cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input) 63.636 - 63.637 --targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio.lzo initramfs_data.cpio 63.638 -+targets := initramfs_data.cpio.gz initramfs_data.cpio.bz2 initramfs_data.cpio.lzma initramfs_data.cpio.xz initramfs_data.cpio.lzo initramfs_data.cpio 63.639 - # do not try to update files included in initramfs 63.640 - $(deps_initramfs): ; 63.641 -
64.1 --- a/kernel-modular/stuff/003-squashfs-x86-support-xz-compressed-kernel.patch Thu Jul 18 13:24:21 2013 +0000 64.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 64.3 @@ -1,128 +0,0 @@ 64.4 -From: Lasse Collin <lasse.collin@tukaani.org> 64.5 -Date: Thu, 2 Dec 2010 19:14:57 +0000 (+0200) 64.6 -Subject: x86: Support XZ-compressed kernel 64.7 -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fpkl%2Fsquashfs-xz.git;a=commitdiff_plain;h=d4ad78414e5312126127b1f88cdaf8584af3eef1 64.8 - 64.9 -x86: Support XZ-compressed kernel 64.10 - 64.11 -This integrates the XZ decompression code to the x86 64.12 -pre-boot code. 64.13 - 64.14 -mkpiggy.c is updated to reserve about 32 KiB more buffer safety 64.15 -margin for kernel decompression. It is done unconditionally for 64.16 -all decompressors to keep the code simpler. 64.17 - 64.18 -The XZ decompressor needs around 30 KiB of heap, so the heap size 64.19 -is increased to 32 KiB on both x86-32 and x86-64. 64.20 - 64.21 -Documentation/x86/boot.txt is updated to list the XZ magic number. 64.22 - 64.23 -With the x86 BCJ filter in XZ, XZ-compressed x86 kernel tends to be 64.24 -a few percent smaller than the equivalent LZMA-compressed kernel. 64.25 - 64.26 -Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> 64.27 ---- 64.28 - 64.29 -diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt 64.30 -index 30b43e1..3988cde 100644 64.31 ---- a/Documentation/x86/boot.txt 64.32 -+++ b/Documentation/x86/boot.txt 64.33 -@@ -621,9 +621,9 @@ Protocol: 2.08+ 64.34 - The payload may be compressed. The format of both the compressed and 64.35 - uncompressed data should be determined using the standard magic 64.36 - numbers. The currently supported compression formats are gzip 64.37 -- (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A) and LZMA 64.38 -- (magic number 5D 00). The uncompressed payload is currently always ELF 64.39 -- (magic number 7F 45 4C 46). 64.40 -+ (magic numbers 1F 8B or 1F 9E), bzip2 (magic number 42 5A), LZMA 64.41 -+ (magic number 5D 00), and XZ (magic number FD 37). The uncompressed 64.42 -+ payload is currently always ELF (magic number 7F 45 4C 46). 64.43 - 64.44 - Field name: payload_length 64.45 - Type: read 64.46 -diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig 64.47 -index cea0cd9..f3db0d7 100644 64.48 ---- a/arch/x86/Kconfig 64.49 -+++ b/arch/x86/Kconfig 64.50 -@@ -51,6 +51,7 @@ config X86 64.51 - select HAVE_KERNEL_GZIP 64.52 - select HAVE_KERNEL_BZIP2 64.53 - select HAVE_KERNEL_LZMA 64.54 -+ select HAVE_KERNEL_XZ 64.55 - select HAVE_KERNEL_LZO 64.56 - select HAVE_HW_BREAKPOINT 64.57 - select HAVE_MIXED_BREAKPOINTS_REGS 64.58 -diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile 64.59 -index 0c22955..09664ef 100644 64.60 ---- a/arch/x86/boot/compressed/Makefile 64.61 -+++ b/arch/x86/boot/compressed/Makefile 64.62 -@@ -4,7 +4,7 @@ 64.63 - # create a compressed vmlinux image from the original vmlinux 64.64 - # 64.65 - 64.66 --targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o 64.67 -+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o 64.68 - 64.69 - KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 64.70 - KBUILD_CFLAGS += -fno-strict-aliasing -fPIC 64.71 -@@ -49,12 +49,15 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE 64.72 - $(call if_changed,bzip2) 64.73 - $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE 64.74 - $(call if_changed,lzma) 64.75 -+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE 64.76 -+ $(call if_changed,xzkern) 64.77 - $(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE 64.78 - $(call if_changed,lzo) 64.79 - 64.80 - suffix-$(CONFIG_KERNEL_GZIP) := gz 64.81 - suffix-$(CONFIG_KERNEL_BZIP2) := bz2 64.82 - suffix-$(CONFIG_KERNEL_LZMA) := lzma 64.83 -+suffix-$(CONFIG_KERNEL_XZ) := xz 64.84 - suffix-$(CONFIG_KERNEL_LZO) := lzo 64.85 - 64.86 - quiet_cmd_mkpiggy = MKPIGGY $@ 64.87 -diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c 64.88 -index 8f7bef8..6d4cab7 100644 64.89 ---- a/arch/x86/boot/compressed/misc.c 64.90 -+++ b/arch/x86/boot/compressed/misc.c 64.91 -@@ -139,6 +139,10 @@ static int lines, cols; 64.92 - #include "../../../../lib/decompress_unlzma.c" 64.93 - #endif 64.94 - 64.95 -+#ifdef CONFIG_KERNEL_XZ 64.96 -+#include "../../../../lib/decompress_unxz.c" 64.97 -+#endif 64.98 -+ 64.99 - #ifdef CONFIG_KERNEL_LZO 64.100 - #include "../../../../lib/decompress_unlzo.c" 64.101 - #endif 64.102 -diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c 64.103 -index 5c22812..646aa78 100644 64.104 ---- a/arch/x86/boot/compressed/mkpiggy.c 64.105 -+++ b/arch/x86/boot/compressed/mkpiggy.c 64.106 -@@ -74,7 +74,7 @@ int main(int argc, char *argv[]) 64.107 - 64.108 - offs = (olen > ilen) ? olen - ilen : 0; 64.109 - offs += olen >> 12; /* Add 8 bytes for each 32K block */ 64.110 -- offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */ 64.111 -+ offs += 64*1024 + 128; /* Add 64K + 128 bytes slack */ 64.112 - offs = (offs+4095) & ~4095; /* Round to a 4K boundary */ 64.113 - 64.114 - printf(".section \".rodata..compressed\",\"a\",@progbits\n"); 64.115 -diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h 64.116 -index 3b62ab5..5e1a2ee 100644 64.117 ---- a/arch/x86/include/asm/boot.h 64.118 -+++ b/arch/x86/include/asm/boot.h 64.119 -@@ -32,11 +32,7 @@ 64.120 - #define BOOT_HEAP_SIZE 0x400000 64.121 - #else /* !CONFIG_KERNEL_BZIP2 */ 64.122 - 64.123 --#ifdef CONFIG_X86_64 64.124 --#define BOOT_HEAP_SIZE 0x7000 64.125 --#else 64.126 --#define BOOT_HEAP_SIZE 0x4000 64.127 --#endif 64.128 -+#define BOOT_HEAP_SIZE 0x8000 64.129 - 64.130 - #endif /* !CONFIG_KERNEL_BZIP2 */ 64.131 -
65.1 --- a/kernel-modular/stuff/004-squashfs-add-xz-compression-support.patch Thu Jul 18 13:24:21 2013 +0000 65.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 65.3 @@ -1,183 +0,0 @@ 65.4 -From: Phillip Lougher <phillip@lougher.demon.co.uk> 65.5 -Date: Thu, 9 Dec 2010 02:02:29 +0000 (+0000) 65.6 -Subject: Squashfs: add XZ compression support 65.7 -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fpkl%2Fsquashfs-xz.git;a=commitdiff_plain;h=d3e6969b9ff1f3a3c6bf3da71433c77046aa80e4 65.8 - 65.9 -Squashfs: add XZ compression support 65.10 - 65.11 -Add XZ decompressor wrapper code. 65.12 - 65.13 -Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> 65.14 ---- 65.15 - 65.16 -diff --git a/fs/squashfs/squashfs_fs.h b/fs/squashfs/squashfs_fs.h 65.17 -index c5137fc..39533fe 100644 65.18 ---- a/fs/squashfs/squashfs_fs.h 65.19 -+++ b/fs/squashfs/squashfs_fs.h 65.20 -@@ -238,6 +238,7 @@ struct meta_index { 65.21 - #define ZLIB_COMPRESSION 1 65.22 - #define LZMA_COMPRESSION 2 65.23 - #define LZO_COMPRESSION 3 65.24 -+#define XZ_COMPRESSION 4 65.25 - 65.26 - struct squashfs_super_block { 65.27 - __le32 s_magic; 65.28 -diff --git a/fs/squashfs/xz_wrapper.c b/fs/squashfs/xz_wrapper.c 65.29 -new file mode 100644 65.30 -index 0000000..053fe35 65.31 ---- /dev/null 65.32 -+++ b/fs/squashfs/xz_wrapper.c 65.33 -@@ -0,0 +1,153 @@ 65.34 -+/* 65.35 -+ * Squashfs - a compressed read only filesystem for Linux 65.36 -+ * 65.37 -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 65.38 -+ * Phillip Lougher <phillip@lougher.demon.co.uk> 65.39 -+ * 65.40 -+ * This program is free software; you can redistribute it and/or 65.41 -+ * modify it under the terms of the GNU General Public License 65.42 -+ * as published by the Free Software Foundation; either version 2, 65.43 -+ * or (at your option) any later version. 65.44 -+ * 65.45 -+ * This program is distributed in the hope that it will be useful, 65.46 -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 65.47 -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 65.48 -+ * GNU General Public License for more details. 65.49 -+ * 65.50 -+ * You should have received a copy of the GNU General Public License 65.51 -+ * along with this program; if not, write to the Free Software 65.52 -+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. 65.53 -+ * 65.54 -+ * xz_wrapper.c 65.55 -+ */ 65.56 -+ 65.57 -+ 65.58 -+#include <linux/mutex.h> 65.59 -+#include <linux/buffer_head.h> 65.60 -+#include <linux/slab.h> 65.61 -+#include <linux/xz.h> 65.62 -+ 65.63 -+#include "squashfs_fs.h" 65.64 -+#include "squashfs_fs_sb.h" 65.65 -+#include "squashfs_fs_i.h" 65.66 -+#include "squashfs.h" 65.67 -+#include "decompressor.h" 65.68 -+ 65.69 -+struct squashfs_xz { 65.70 -+ struct xz_dec *state; 65.71 -+ struct xz_buf buf; 65.72 -+}; 65.73 -+ 65.74 -+static void *squashfs_xz_init(struct squashfs_sb_info *msblk) 65.75 -+{ 65.76 -+ int block_size = max_t(int, msblk->block_size, SQUASHFS_METADATA_SIZE); 65.77 -+ 65.78 -+ struct squashfs_xz *stream = kmalloc(sizeof(*stream), GFP_KERNEL); 65.79 -+ if (stream == NULL) 65.80 -+ goto failed; 65.81 -+ stream->state = xz_dec_init(XZ_PREALLOC, block_size); 65.82 -+ if (stream->state == NULL) 65.83 -+ goto failed; 65.84 -+ 65.85 -+ return stream; 65.86 -+ 65.87 -+failed: 65.88 -+ ERROR("Failed to allocate xz workspace\n"); 65.89 -+ kfree(stream); 65.90 -+ return NULL; 65.91 -+} 65.92 -+ 65.93 -+ 65.94 -+static void squashfs_xz_free(void *strm) 65.95 -+{ 65.96 -+ struct squashfs_xz *stream = strm; 65.97 -+ 65.98 -+ if (stream) { 65.99 -+ xz_dec_end(stream->state); 65.100 -+ kfree(stream); 65.101 -+ } 65.102 -+} 65.103 -+ 65.104 -+ 65.105 -+static int squashfs_xz_uncompress(struct squashfs_sb_info *msblk, void **buffer, 65.106 -+ struct buffer_head **bh, int b, int offset, int length, int srclength, 65.107 -+ int pages) 65.108 -+{ 65.109 -+ enum xz_ret xz_err; 65.110 -+ int avail, total = 0, k = 0, page = 0; 65.111 -+ struct squashfs_xz *stream = msblk->stream; 65.112 -+ 65.113 -+ mutex_lock(&msblk->read_data_mutex); 65.114 -+ 65.115 -+ xz_dec_reset(stream->state); 65.116 -+ stream->buf.in_pos = 0; 65.117 -+ stream->buf.in_size = 0; 65.118 -+ stream->buf.out_pos = 0; 65.119 -+ stream->buf.out_size = PAGE_CACHE_SIZE; 65.120 -+ stream->buf.out = buffer[page++]; 65.121 -+ 65.122 -+ do { 65.123 -+ if (stream->buf.in_pos == stream->buf.in_size && k < b) { 65.124 -+ avail = min(length, msblk->devblksize - offset); 65.125 -+ length -= avail; 65.126 -+ wait_on_buffer(bh[k]); 65.127 -+ if (!buffer_uptodate(bh[k])) 65.128 -+ goto release_mutex; 65.129 -+ 65.130 -+ if (avail == 0) { 65.131 -+ offset = 0; 65.132 -+ put_bh(bh[k++]); 65.133 -+ continue; 65.134 -+ } 65.135 -+ 65.136 -+ stream->buf.in = bh[k]->b_data + offset; 65.137 -+ stream->buf.in_size = avail; 65.138 -+ stream->buf.in_pos = 0; 65.139 -+ offset = 0; 65.140 -+ } 65.141 -+ 65.142 -+ if (stream->buf.out_pos == stream->buf.out_size 65.143 -+ && page < pages) { 65.144 -+ stream->buf.out = buffer[page++]; 65.145 -+ stream->buf.out_pos = 0; 65.146 -+ total += PAGE_CACHE_SIZE; 65.147 -+ } 65.148 -+ 65.149 -+ xz_err = xz_dec_run(stream->state, &stream->buf); 65.150 -+ 65.151 -+ if (stream->buf.in_pos == stream->buf.in_size && k < b) 65.152 -+ put_bh(bh[k++]); 65.153 -+ } while (xz_err == XZ_OK); 65.154 -+ 65.155 -+ if (xz_err != XZ_STREAM_END) { 65.156 -+ ERROR("xz_dec_run error, data probably corrupt\n"); 65.157 -+ goto release_mutex; 65.158 -+ } 65.159 -+ 65.160 -+ if (k < b) { 65.161 -+ ERROR("xz_uncompress error, input remaining\n"); 65.162 -+ goto release_mutex; 65.163 -+ } 65.164 -+ 65.165 -+ total += stream->buf.out_pos; 65.166 -+ mutex_unlock(&msblk->read_data_mutex); 65.167 -+ return total; 65.168 -+ 65.169 -+release_mutex: 65.170 -+ mutex_unlock(&msblk->read_data_mutex); 65.171 -+ 65.172 -+ for (; k < b; k++) 65.173 -+ put_bh(bh[k]); 65.174 -+ 65.175 -+ return -EIO; 65.176 -+} 65.177 -+ 65.178 -+const struct squashfs_decompressor squashfs_xz_comp_ops = { 65.179 -+ .init = squashfs_xz_init, 65.180 -+ .free = squashfs_xz_free, 65.181 -+ .decompress = squashfs_xz_uncompress, 65.182 -+ .id = XZ_COMPRESSION, 65.183 -+ .name = "xz", 65.184 -+ .supported = 1 65.185 -+}; 65.186 -+
66.1 --- a/kernel-modular/stuff/005-squashfs-add-xz-compression-configuration-option.patch Thu Jul 18 13:24:21 2013 +0000 66.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 66.3 @@ -1,86 +0,0 @@ 66.4 -From: Phillip Lougher <phillip@lougher.demon.co.uk> 66.5 -Date: Thu, 9 Dec 2010 02:08:31 +0000 (+0000) 66.6 -Subject: Squashfs: Add XZ compression configuration option 66.7 -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fpkl%2Fsquashfs-xz.git;a=commitdiff_plain;h=e23d468968e608de27328888240de27d7582ad52 66.8 - 66.9 -Squashfs: Add XZ compression configuration option 66.10 - 66.11 -Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk> 66.12 ---- 66.13 - 66.14 -diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig 66.15 -index e5f63da..e96d99a 100644 66.16 ---- a/fs/squashfs/Kconfig 66.17 -+++ b/fs/squashfs/Kconfig 66.18 -@@ -53,6 +53,22 @@ config SQUASHFS_LZO 66.19 - 66.20 - If unsure, say N. 66.21 - 66.22 -+config SQUASHFS_XZ 66.23 -+ bool "Include support for XZ compressed file systems" 66.24 -+ depends on SQUASHFS 66.25 -+ default n 66.26 -+ select XZ_DEC 66.27 -+ help 66.28 -+ Saying Y here includes support for reading Squashfs file systems 66.29 -+ compressed with XZ compresssion. XZ gives better compression than 66.30 -+ the default zlib compression, at the expense of greater CPU and 66.31 -+ memory overhead. 66.32 -+ 66.33 -+ XZ is not the standard compression used in Squashfs and so most 66.34 -+ file systems will be readable without selecting this option. 66.35 -+ 66.36 -+ If unsure, say N. 66.37 -+ 66.38 - config SQUASHFS_EMBEDDED 66.39 - bool "Additional option for memory-constrained systems" 66.40 - depends on SQUASHFS 66.41 -diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile 66.42 -index 7672bac..cecf2be 100644 66.43 ---- a/fs/squashfs/Makefile 66.44 -+++ b/fs/squashfs/Makefile 66.45 -@@ -7,3 +7,4 @@ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o 66.46 - squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o 66.47 - squashfs-$(CONFIG_SQUASHFS_XATTR) += xattr.o xattr_id.o 66.48 - squashfs-$(CONFIG_SQUASHFS_LZO) += lzo_wrapper.o 66.49 -+squashfs-$(CONFIG_SQUASHFS_XZ) += xz_wrapper.o 66.50 -diff --git a/fs/squashfs/decompressor.c b/fs/squashfs/decompressor.c 66.51 -index 24af9ce..ac333b8 100644 66.52 ---- a/fs/squashfs/decompressor.c 66.53 -+++ b/fs/squashfs/decompressor.c 66.54 -@@ -46,6 +46,12 @@ static const struct squashfs_decompressor squashfs_lzo_unsupported_comp_ops = { 66.55 - }; 66.56 - #endif 66.57 - 66.58 -+#ifndef CONFIG_SQUASHFS_XZ 66.59 -+static const struct squashfs_decompressor squashfs_xz_unsupported_comp_ops = { 66.60 -+ NULL, NULL, NULL, XZ_COMPRESSION, "xz", 0 66.61 -+}; 66.62 -+#endif 66.63 -+ 66.64 - static const struct squashfs_decompressor squashfs_unknown_comp_ops = { 66.65 - NULL, NULL, NULL, 0, "unknown", 0 66.66 - }; 66.67 -@@ -58,6 +64,11 @@ static const struct squashfs_decompressor *decompressor[] = { 66.68 - #else 66.69 - &squashfs_lzo_unsupported_comp_ops, 66.70 - #endif 66.71 -+#ifdef CONFIG_SQUASHFS_XZ 66.72 -+ &squashfs_xz_comp_ops, 66.73 -+#else 66.74 -+ &squashfs_xz_unsupported_comp_ops, 66.75 -+#endif 66.76 - &squashfs_unknown_comp_ops 66.77 - }; 66.78 - 66.79 -diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h 66.80 -index 5d45569..1096e2e 100644 66.81 ---- a/fs/squashfs/squashfs.h 66.82 -+++ b/fs/squashfs/squashfs.h 66.83 -@@ -107,3 +107,6 @@ extern const struct squashfs_decompressor squashfs_zlib_comp_ops; 66.84 - 66.85 - /* lzo_wrapper.c */ 66.86 - extern const struct squashfs_decompressor squashfs_lzo_comp_ops; 66.87 -+ 66.88 -+/* xz_wrapper.c */ 66.89 -+extern const struct squashfs_decompressor squashfs_xz_comp_ops;
67.1 --- a/kernel-modular/stuff/aufs2-2.6.36-fix.patch Thu Jul 18 13:24:21 2013 +0000 67.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 67.3 @@ -1,130 +0,0 @@ 67.4 -diff --git a/fs/file_table.c b/fs/file_table.c 67.5 -index a04bdd8..fbf8908 100644 67.6 ---- a/fs/file_table.c 67.7 -+++ b/fs/file_table.c 67.8 -@@ -20,7 +20,6 @@ 67.9 - #include <linux/cdev.h> 67.10 - #include <linux/fsnotify.h> 67.11 - #include <linux/sysctl.h> 67.12 --#include <linux/lglock.h> 67.13 - #include <linux/percpu_counter.h> 67.14 - #include <linux/percpu.h> 67.15 - #include <linux/ima.h> 67.16 -@@ -34,7 +33,6 @@ struct files_stat_struct files_stat = { 67.17 - .max_files = NR_FILE 67.18 - }; 67.19 - 67.20 --DECLARE_LGLOCK(files_lglock); 67.21 - DEFINE_LGLOCK(files_lglock); 67.22 - 67.23 - /* SLAB cache for file structures */ 67.24 -@@ -394,37 +392,6 @@ void file_sb_list_del(struct file *file) 67.25 - } 67.26 - } 67.27 - 67.28 --#ifdef CONFIG_SMP 67.29 -- 67.30 --/* 67.31 -- * These macros iterate all files on all CPUs for a given superblock. 67.32 -- * files_lglock must be held globally. 67.33 -- */ 67.34 --#define do_file_list_for_each_entry(__sb, __file) \ 67.35 --{ \ 67.36 -- int i; \ 67.37 -- for_each_possible_cpu(i) { \ 67.38 -- struct list_head *list; \ 67.39 -- list = per_cpu_ptr((__sb)->s_files, i); \ 67.40 -- list_for_each_entry((__file), list, f_u.fu_list) 67.41 -- 67.42 --#define while_file_list_for_each_entry \ 67.43 -- } \ 67.44 --} 67.45 -- 67.46 --#else 67.47 -- 67.48 --#define do_file_list_for_each_entry(__sb, __file) \ 67.49 --{ \ 67.50 -- struct list_head *list; \ 67.51 -- list = &(sb)->s_files; \ 67.52 -- list_for_each_entry((__file), list, f_u.fu_list) 67.53 -- 67.54 --#define while_file_list_for_each_entry \ 67.55 --} 67.56 -- 67.57 --#endif 67.58 -- 67.59 - int fs_may_remount_ro(struct super_block *sb) 67.60 - { 67.61 - struct file *file; 67.62 -diff --git a/fs/statfs.c b/fs/statfs.c 67.63 -index 30ea8c8..9025c98 100644 67.64 ---- a/fs/statfs.c 67.65 -+++ b/fs/statfs.c 67.66 -@@ -61,6 +61,7 @@ int statfs_by_dentry(struct dentry *dentry, struct kstatfs *buf) 67.67 - buf->f_frsize = buf->f_bsize; 67.68 - return retval; 67.69 - } 67.70 -+EXPORT_SYMBOL(statfs_by_dentry); 67.71 - 67.72 - int vfs_statfs(struct path *path, struct kstatfs *buf) 67.73 - { 67.74 -diff --git a/include/linux/fs.h b/include/linux/fs.h 67.75 -index 63d069b..741d296 100644 67.76 ---- a/include/linux/fs.h 67.77 -+++ b/include/linux/fs.h 67.78 -@@ -9,6 +9,7 @@ 67.79 - #include <linux/limits.h> 67.80 - #include <linux/ioctl.h> 67.81 - #include <linux/blk_types.h> 67.82 -+#include <linux/lglock.h> 67.83 - 67.84 - /* 67.85 - * It's silly to have NR_OPEN bigger than NR_FILE, but you can change 67.86 -@@ -1814,6 +1815,7 @@ extern struct vfsmount *collect_mounts(struct path *); 67.87 - extern void drop_collected_mounts(struct vfsmount *); 67.88 - extern int iterate_mounts(int (*)(struct vfsmount *, void *), void *, 67.89 - struct vfsmount *); 67.90 -+extern int statfs_by_dentry(struct dentry *dentry, struct kstatfs *buf); 67.91 - extern int vfs_statfs(struct path *, struct kstatfs *); 67.92 - extern int statfs_by_dentry(struct dentry *, struct kstatfs *); 67.93 - extern int freeze_super(struct super_block *super); 67.94 -@@ -2481,5 +2483,39 @@ int __init get_filesystem_list(char *buf); 67.95 - #define OPEN_FMODE(flag) ((__force fmode_t)(((flag + 1) & O_ACCMODE) | \ 67.96 - (flag & FMODE_NONOTIFY))) 67.97 - 67.98 -+ 67.99 -+DECLARE_LGLOCK(files_lglock); 67.100 -+ 67.101 -+#ifdef CONFIG_SMP 67.102 -+ 67.103 -+/* 67.104 -+ * These macros iterate all files on all CPUs for a given superblock. 67.105 -+ * files_lglock must be held globally. 67.106 -+ */ 67.107 -+#define do_file_list_for_each_entry(__sb, __file) \ 67.108 -+{ \ 67.109 -+ int i; \ 67.110 -+ for_each_possible_cpu(i) { \ 67.111 -+ struct list_head *list; \ 67.112 -+ list = per_cpu_ptr((__sb)->s_files, i); \ 67.113 -+ list_for_each_entry((__file), list, f_u.fu_list) 67.114 -+ 67.115 -+#define while_file_list_for_each_entry \ 67.116 -+ } \ 67.117 -+} 67.118 -+ 67.119 -+#else 67.120 -+ 67.121 -+#define do_file_list_for_each_entry(__sb, __file) \ 67.122 -+{ \ 67.123 -+ struct list_head *list; \ 67.124 -+ list = &(sb)->s_files; \ 67.125 -+ list_for_each_entry((__file), list, f_u.fu_list) 67.126 -+ 67.127 -+#define while_file_list_for_each_entry \ 67.128 -+} 67.129 -+ 67.130 -+#endif 67.131 -+ 67.132 - #endif /* __KERNEL__ */ 67.133 - #endif /* _LINUX_FS_H */
68.1 --- a/kernel-modular/stuff/aufs2-base.patch Thu Jul 18 13:24:21 2013 +0000 68.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 68.3 @@ -1,78 +0,0 @@ 68.4 -aufs2.1 base patch for linux-2.6.37 68.5 - 68.6 -diff --git a/fs/namei.c b/fs/namei.c 68.7 -index 4ff7ca5..a8c583f 100644 68.8 ---- a/fs/namei.c 68.9 -+++ b/fs/namei.c 68.10 -@@ -1161,12 +1161,12 @@ out: 68.11 - * needs parent already locked. Doesn't follow mounts. 68.12 - * SMP-safe. 68.13 - */ 68.14 --static struct dentry *lookup_hash(struct nameidata *nd) 68.15 -+struct dentry *lookup_hash(struct nameidata *nd) 68.16 - { 68.17 - return __lookup_hash(&nd->last, nd->path.dentry, nd); 68.18 - } 68.19 - 68.20 --static int __lookup_one_len(const char *name, struct qstr *this, 68.21 -+int __lookup_one_len(const char *name, struct qstr *this, 68.22 - struct dentry *base, int len) 68.23 - { 68.24 - unsigned long hash; 68.25 -diff --git a/fs/splice.c b/fs/splice.c 68.26 -index ce2f025..ff0ae69 100644 68.27 ---- a/fs/splice.c 68.28 -+++ b/fs/splice.c 68.29 -@@ -1092,8 +1092,8 @@ EXPORT_SYMBOL(generic_splice_sendpage); 68.30 - /* 68.31 - * Attempt to initiate a splice from pipe to file. 68.32 - */ 68.33 --static long do_splice_from(struct pipe_inode_info *pipe, struct file *out, 68.34 -- loff_t *ppos, size_t len, unsigned int flags) 68.35 -+long do_splice_from(struct pipe_inode_info *pipe, struct file *out, 68.36 -+ loff_t *ppos, size_t len, unsigned int flags) 68.37 - { 68.38 - ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, 68.39 - loff_t *, size_t, unsigned int); 68.40 -@@ -1120,9 +1120,9 @@ static long do_splice_from(struct pipe_inode_info *pipe, struct file *out, 68.41 - /* 68.42 - * Attempt to initiate a splice from a file to a pipe. 68.43 - */ 68.44 --static long do_splice_to(struct file *in, loff_t *ppos, 68.45 -- struct pipe_inode_info *pipe, size_t len, 68.46 -- unsigned int flags) 68.47 -+long do_splice_to(struct file *in, loff_t *ppos, 68.48 -+ struct pipe_inode_info *pipe, size_t len, 68.49 -+ unsigned int flags) 68.50 - { 68.51 - ssize_t (*splice_read)(struct file *, loff_t *, 68.52 - struct pipe_inode_info *, size_t, unsigned int); 68.53 -diff --git a/include/linux/namei.h b/include/linux/namei.h 68.54 -index 05b441d..91bc74e 100644 68.55 ---- a/include/linux/namei.h 68.56 -+++ b/include/linux/namei.h 68.57 -@@ -73,6 +73,9 @@ extern int vfs_path_lookup(struct dentry *, struct vfsmount *, 68.58 - extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry, 68.59 - int (*open)(struct inode *, struct file *)); 68.60 - 68.61 -+extern struct dentry *lookup_hash(struct nameidata *nd); 68.62 -+extern int __lookup_one_len(const char *name, struct qstr *this, 68.63 -+ struct dentry *base, int len); 68.64 - extern struct dentry *lookup_one_len(const char *, struct dentry *, int); 68.65 - 68.66 - extern int follow_down(struct path *); 68.67 -diff --git a/include/linux/splice.h b/include/linux/splice.h 68.68 -index 997c3b4..be9a153 100644 68.69 ---- a/include/linux/splice.h 68.70 -+++ b/include/linux/splice.h 68.71 -@@ -89,4 +89,10 @@ extern int splice_grow_spd(struct pipe_inode_info *, struct splice_pipe_desc *); 68.72 - extern void splice_shrink_spd(struct pipe_inode_info *, 68.73 - struct splice_pipe_desc *); 68.74 - 68.75 -+extern long do_splice_from(struct pipe_inode_info *pipe, struct file *out, 68.76 -+ loff_t *ppos, size_t len, unsigned int flags); 68.77 -+extern long do_splice_to(struct file *in, loff_t *ppos, 68.78 -+ struct pipe_inode_info *pipe, size_t len, 68.79 -+ unsigned int flags); 68.80 -+ 68.81 - #endif
69.1 --- a/kernel-modular/stuff/aufs2-kbuild.patch Thu Jul 18 13:24:21 2013 +0000 69.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 69.3 @@ -1,35 +0,0 @@ 69.4 -aufs2.1 kbuild patch for linux-2.6.37 69.5 - 69.6 -diff --git a/fs/Kconfig b/fs/Kconfig 69.7 -index 771f457..bb1a52f 100644 69.8 ---- a/fs/Kconfig 69.9 -+++ b/fs/Kconfig 69.10 -@@ -191,6 +191,7 @@ source "fs/romfs/Kconfig" 69.11 - source "fs/sysv/Kconfig" 69.12 - source "fs/ufs/Kconfig" 69.13 - source "fs/exofs/Kconfig" 69.14 -+source "fs/aufs/Kconfig" 69.15 - 69.16 - endif # MISC_FILESYSTEMS 69.17 - 69.18 -diff --git a/fs/Makefile b/fs/Makefile 69.19 -index a7f7cef..95dd4d3 100644 69.20 ---- a/fs/Makefile 69.21 -+++ b/fs/Makefile 69.22 -@@ -121,3 +121,4 @@ obj-$(CONFIG_BTRFS_FS) += btrfs/ 69.23 - obj-$(CONFIG_GFS2_FS) += gfs2/ 69.24 - obj-$(CONFIG_EXOFS_FS) += exofs/ 69.25 - obj-$(CONFIG_CEPH_FS) += ceph/ 69.26 -+obj-$(CONFIG_AUFS_FS) += aufs/ 69.27 -diff --git a/include/linux/Kbuild b/include/linux/Kbuild 69.28 -index 97319a8..7ebb4b4 100644 69.29 ---- a/include/linux/Kbuild 69.30 -+++ b/include/linux/Kbuild 69.31 -@@ -60,6 +60,7 @@ header-y += atmppp.h 69.32 - header-y += atmsap.h 69.33 - header-y += atmsvc.h 69.34 - header-y += audit.h 69.35 -+header-y += aufs_type.h 69.36 - header-y += auto_fs.h 69.37 - header-y += auto_fs4.h 69.38 - header-y += auxvec.h
70.1 --- a/kernel-modular/stuff/aufs2-module-2.6.36.patch Thu Jul 18 13:24:21 2013 +0000 70.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 70.3 @@ -1,47 +0,0 @@ 70.4 -diff --git a/ubuntu/aufs/branch.c b/ubuntu/aufs/branch.c 70.5 -index cd4463c..ff6b158 100644 70.6 ---- a/fs/aufs/branch.c 70.7 -+++ b/fs/aufs/branch.c 70.8 -@@ -22,6 +22,8 @@ 70.9 - 70.10 - #include <linux/file.h> 70.11 - #include <linux/statfs.h> 70.12 -+#include <linux/lglock.h> 70.13 -+#include <linux/percpu.h> 70.14 - #include "aufs.h" 70.15 - 70.16 - /* 70.17 -@@ -851,7 +853,8 @@ static int au_br_mod_files_ro(struct super_block *sb, aufs_bindex_t bindex) 70.18 - goto out; 70.19 - 70.20 - /* no need file_list_lock() since sbinfo is locked? defered? */ 70.21 -- list_for_each_entry(file, &sb->s_files, f_u.fu_list) { 70.22 -+ lg_global_lock(files_lglock); 70.23 -+ do_file_list_for_each_entry(sb, file) { 70.24 - if (special_file(file->f_dentry->d_inode->i_mode)) 70.25 - continue; 70.26 - 70.27 -@@ -861,6 +864,7 @@ static int au_br_mod_files_ro(struct super_block *sb, aufs_bindex_t bindex) 70.28 - err = -EBUSY; 70.29 - FiMustNoWaiters(file); 70.30 - fi_read_unlock(file); 70.31 -+ lg_global_unlock(files_lglock); 70.32 - goto out_free; 70.33 - } 70.34 - 70.35 -@@ -889,10 +893,13 @@ static int au_br_mod_files_ro(struct super_block *sb, aufs_bindex_t bindex) 70.36 - if (p) { 70.37 - a = p; 70.38 - a[n++] = hf; 70.39 -- } else 70.40 -+ } else { 70.41 -+ lg_global_unlock(files_lglock); 70.42 - goto out_free; 70.43 -+ } 70.44 - } 70.45 -- } 70.46 -+ } while_file_list_for_each_entry; 70.47 -+ lg_global_unlock(files_lglock); 70.48 - 70.49 - err = 0; 70.50 - if (n)
71.1 --- a/kernel-modular/stuff/aufs2-standalone.patch Thu Jul 18 13:24:21 2013 +0000 71.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 71.3 @@ -1,289 +0,0 @@ 71.4 -aufs2.1 standalone patch for linux-2.6.37 71.5 - 71.6 -diff --git a/fs/file_table.c b/fs/file_table.c 71.7 -index c3dee38..f529e4d 100644 71.8 ---- a/fs/file_table.c 71.9 -+++ b/fs/file_table.c 71.10 -@@ -393,6 +393,8 @@ void file_sb_list_del(struct file *file) 71.11 - } 71.12 - } 71.13 - 71.14 -+EXPORT_SYMBOL(file_sb_list_del); 71.15 -+ 71.16 - #ifdef CONFIG_SMP 71.17 - 71.18 - /* 71.19 -diff --git a/fs/inode.c b/fs/inode.c 71.20 -index ae2727a..2c8071a 100644 71.21 ---- a/fs/inode.c 71.22 -+++ b/fs/inode.c 71.23 -@@ -82,6 +82,7 @@ static struct hlist_head *inode_hashtable __read_mostly; 71.24 - * the i_state of an inode while it is in use.. 71.25 - */ 71.26 - DEFINE_SPINLOCK(inode_lock); 71.27 -+EXPORT_SYMBOL(inode_lock); 71.28 - 71.29 - /* 71.30 - * iprune_sem provides exclusion between the kswapd or try_to_free_pages 71.31 -diff --git a/fs/namei.c b/fs/namei.c 71.32 -index a8c583f..b020c45 100644 71.33 ---- a/fs/namei.c 71.34 -+++ b/fs/namei.c 71.35 -@@ -347,6 +347,7 @@ int deny_write_access(struct file * file) 71.36 - 71.37 - return 0; 71.38 - } 71.39 -+EXPORT_SYMBOL(deny_write_access); 71.40 - 71.41 - /** 71.42 - * path_get - get a reference to a path 71.43 -@@ -1165,6 +1166,7 @@ struct dentry *lookup_hash(struct nameidata *nd) 71.44 - { 71.45 - return __lookup_hash(&nd->last, nd->path.dentry, nd); 71.46 - } 71.47 -+EXPORT_SYMBOL(lookup_hash); 71.48 - 71.49 - int __lookup_one_len(const char *name, struct qstr *this, 71.50 - struct dentry *base, int len) 71.51 -@@ -1187,6 +1189,7 @@ int __lookup_one_len(const char *name, struct qstr *this, 71.52 - this->hash = end_name_hash(hash); 71.53 - return 0; 71.54 - } 71.55 -+EXPORT_SYMBOL(__lookup_one_len); 71.56 - 71.57 - /** 71.58 - * lookup_one_len - filesystem helper to lookup single pathname component 71.59 -diff --git a/fs/namespace.c b/fs/namespace.c 71.60 -index 3dbfc07..3998762 100644 71.61 ---- a/fs/namespace.c 71.62 -+++ b/fs/namespace.c 71.63 -@@ -1321,6 +1321,7 @@ int iterate_mounts(int (*f)(struct vfsmount *, void *), void *arg, 71.64 - } 71.65 - return 0; 71.66 - } 71.67 -+EXPORT_SYMBOL(iterate_mounts); 71.68 - 71.69 - static void cleanup_group_ids(struct vfsmount *mnt, struct vfsmount *end) 71.70 - { 71.71 -diff --git a/fs/notify/group.c b/fs/notify/group.c 71.72 -index d309f38..f0e9568 100644 71.73 ---- a/fs/notify/group.c 71.74 -+++ b/fs/notify/group.c 71.75 -@@ -22,6 +22,7 @@ 71.76 - #include <linux/srcu.h> 71.77 - #include <linux/rculist.h> 71.78 - #include <linux/wait.h> 71.79 -+#include <linux/module.h> 71.80 - 71.81 - #include <linux/fsnotify_backend.h> 71.82 - #include "fsnotify.h" 71.83 -@@ -70,6 +71,7 @@ void fsnotify_put_group(struct fsnotify_group *group) 71.84 - if (atomic_dec_and_test(&group->refcnt)) 71.85 - fsnotify_destroy_group(group); 71.86 - } 71.87 -+EXPORT_SYMBOL(fsnotify_put_group); 71.88 - 71.89 - /* 71.90 - * Create a new fsnotify_group and hold a reference for the group returned. 71.91 -@@ -102,3 +104,4 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops) 71.92 - 71.93 - return group; 71.94 - } 71.95 -+EXPORT_SYMBOL(fsnotify_alloc_group); 71.96 -diff --git a/fs/notify/mark.c b/fs/notify/mark.c 71.97 -index 325185e..adede09 100644 71.98 ---- a/fs/notify/mark.c 71.99 -+++ b/fs/notify/mark.c 71.100 -@@ -113,6 +113,7 @@ void fsnotify_put_mark(struct fsnotify_mark *mark) 71.101 - if (atomic_dec_and_test(&mark->refcnt)) 71.102 - mark->free_mark(mark); 71.103 - } 71.104 -+EXPORT_SYMBOL(fsnotify_put_mark); 71.105 - 71.106 - /* 71.107 - * Any time a mark is getting freed we end up here. 71.108 -@@ -190,6 +191,7 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark) 71.109 - if (unlikely(atomic_dec_and_test(&group->num_marks))) 71.110 - fsnotify_final_destroy_group(group); 71.111 - } 71.112 -+EXPORT_SYMBOL(fsnotify_destroy_mark); 71.113 - 71.114 - void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask) 71.115 - { 71.116 -@@ -277,6 +279,7 @@ err: 71.117 - 71.118 - return ret; 71.119 - } 71.120 -+EXPORT_SYMBOL(fsnotify_add_mark); 71.121 - 71.122 - /* 71.123 - * clear any marks in a group in which mark->flags & flags is true 71.124 -@@ -332,6 +335,7 @@ void fsnotify_init_mark(struct fsnotify_mark *mark, 71.125 - atomic_set(&mark->refcnt, 1); 71.126 - mark->free_mark = free_mark; 71.127 - } 71.128 -+EXPORT_SYMBOL(fsnotify_init_mark); 71.129 - 71.130 - static int fsnotify_mark_destroy(void *ignored) 71.131 - { 71.132 -diff --git a/fs/open.c b/fs/open.c 71.133 -index 4197b9e..912817a 100644 71.134 ---- a/fs/open.c 71.135 -+++ b/fs/open.c 71.136 -@@ -60,6 +60,7 @@ int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs, 71.137 - mutex_unlock(&dentry->d_inode->i_mutex); 71.138 - return ret; 71.139 - } 71.140 -+EXPORT_SYMBOL(do_truncate); 71.141 - 71.142 - static long do_sys_truncate(const char __user *pathname, loff_t length) 71.143 - { 71.144 -diff --git a/fs/splice.c b/fs/splice.c 71.145 -index ff0ae69..1c9e9b0 100644 71.146 ---- a/fs/splice.c 71.147 -+++ b/fs/splice.c 71.148 -@@ -1116,6 +1116,7 @@ long do_splice_from(struct pipe_inode_info *pipe, struct file *out, 71.149 - 71.150 - return splice_write(pipe, out, ppos, len, flags); 71.151 - } 71.152 -+EXPORT_SYMBOL(do_splice_from); 71.153 - 71.154 - /* 71.155 - * Attempt to initiate a splice from a file to a pipe. 71.156 -@@ -1142,6 +1143,7 @@ long do_splice_to(struct file *in, loff_t *ppos, 71.157 - 71.158 - return splice_read(in, ppos, pipe, len, flags); 71.159 - } 71.160 -+EXPORT_SYMBOL(do_splice_to); 71.161 - 71.162 - /** 71.163 - * splice_direct_to_actor - splices data directly between two non-pipes 71.164 -diff --git a/security/commoncap.c b/security/commoncap.c 71.165 -index 64c2ed9..e58b5d8 100644 71.166 ---- a/security/commoncap.c 71.167 -+++ b/security/commoncap.c 71.168 -@@ -929,3 +929,4 @@ int cap_file_mmap(struct file *file, unsigned long reqprot, 71.169 - } 71.170 - return ret; 71.171 - } 71.172 -+EXPORT_SYMBOL(cap_file_mmap); 71.173 -diff --git a/security/device_cgroup.c b/security/device_cgroup.c 71.174 -index 8d9c48f..29108aa 100644 71.175 ---- a/security/device_cgroup.c 71.176 -+++ b/security/device_cgroup.c 71.177 -@@ -515,6 +515,7 @@ found: 71.178 - 71.179 - return -EPERM; 71.180 - } 71.181 -+EXPORT_SYMBOL(devcgroup_inode_permission); 71.182 - 71.183 - int devcgroup_inode_mknod(int mode, dev_t dev) 71.184 - { 71.185 -diff --git a/security/security.c b/security/security.c 71.186 -index 1b798d3..3b7d2ca 100644 71.187 ---- a/security/security.c 71.188 -+++ b/security/security.c 71.189 -@@ -360,6 +360,7 @@ int security_path_mkdir(struct path *dir, struct dentry *dentry, int mode) 71.190 - return 0; 71.191 - return security_ops->path_mkdir(dir, dentry, mode); 71.192 - } 71.193 -+EXPORT_SYMBOL(security_path_mkdir); 71.194 - 71.195 - int security_path_rmdir(struct path *dir, struct dentry *dentry) 71.196 - { 71.197 -@@ -367,6 +368,7 @@ int security_path_rmdir(struct path *dir, struct dentry *dentry) 71.198 - return 0; 71.199 - return security_ops->path_rmdir(dir, dentry); 71.200 - } 71.201 -+EXPORT_SYMBOL(security_path_rmdir); 71.202 - 71.203 - int security_path_unlink(struct path *dir, struct dentry *dentry) 71.204 - { 71.205 -@@ -374,6 +376,7 @@ int security_path_unlink(struct path *dir, struct dentry *dentry) 71.206 - return 0; 71.207 - return security_ops->path_unlink(dir, dentry); 71.208 - } 71.209 -+EXPORT_SYMBOL(security_path_unlink); 71.210 - 71.211 - int security_path_symlink(struct path *dir, struct dentry *dentry, 71.212 - const char *old_name) 71.213 -@@ -382,6 +385,7 @@ int security_path_symlink(struct path *dir, struct dentry *dentry, 71.214 - return 0; 71.215 - return security_ops->path_symlink(dir, dentry, old_name); 71.216 - } 71.217 -+EXPORT_SYMBOL(security_path_symlink); 71.218 - 71.219 - int security_path_link(struct dentry *old_dentry, struct path *new_dir, 71.220 - struct dentry *new_dentry) 71.221 -@@ -390,6 +394,7 @@ int security_path_link(struct dentry *old_dentry, struct path *new_dir, 71.222 - return 0; 71.223 - return security_ops->path_link(old_dentry, new_dir, new_dentry); 71.224 - } 71.225 -+EXPORT_SYMBOL(security_path_link); 71.226 - 71.227 - int security_path_rename(struct path *old_dir, struct dentry *old_dentry, 71.228 - struct path *new_dir, struct dentry *new_dentry) 71.229 -@@ -400,6 +405,7 @@ int security_path_rename(struct path *old_dir, struct dentry *old_dentry, 71.230 - return security_ops->path_rename(old_dir, old_dentry, new_dir, 71.231 - new_dentry); 71.232 - } 71.233 -+EXPORT_SYMBOL(security_path_rename); 71.234 - 71.235 - int security_path_truncate(struct path *path) 71.236 - { 71.237 -@@ -407,6 +413,7 @@ int security_path_truncate(struct path *path) 71.238 - return 0; 71.239 - return security_ops->path_truncate(path); 71.240 - } 71.241 -+EXPORT_SYMBOL(security_path_truncate); 71.242 - 71.243 - int security_path_chmod(struct dentry *dentry, struct vfsmount *mnt, 71.244 - mode_t mode) 71.245 -@@ -415,6 +422,7 @@ int security_path_chmod(struct dentry *dentry, struct vfsmount *mnt, 71.246 - return 0; 71.247 - return security_ops->path_chmod(dentry, mnt, mode); 71.248 - } 71.249 -+EXPORT_SYMBOL(security_path_chmod); 71.250 - 71.251 - int security_path_chown(struct path *path, uid_t uid, gid_t gid) 71.252 - { 71.253 -@@ -422,6 +430,7 @@ int security_path_chown(struct path *path, uid_t uid, gid_t gid) 71.254 - return 0; 71.255 - return security_ops->path_chown(path, uid, gid); 71.256 - } 71.257 -+EXPORT_SYMBOL(security_path_chown); 71.258 - 71.259 - int security_path_chroot(struct path *path) 71.260 - { 71.261 -@@ -498,6 +507,7 @@ int security_inode_readlink(struct dentry *dentry) 71.262 - return 0; 71.263 - return security_ops->inode_readlink(dentry); 71.264 - } 71.265 -+EXPORT_SYMBOL(security_inode_readlink); 71.266 - 71.267 - int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd) 71.268 - { 71.269 -@@ -512,6 +522,7 @@ int security_inode_permission(struct inode *inode, int mask) 71.270 - return 0; 71.271 - return security_ops->inode_permission(inode, mask); 71.272 - } 71.273 -+EXPORT_SYMBOL(security_inode_permission); 71.274 - 71.275 - int security_inode_setattr(struct dentry *dentry, struct iattr *attr) 71.276 - { 71.277 -@@ -611,6 +622,7 @@ int security_file_permission(struct file *file, int mask) 71.278 - 71.279 - return fsnotify_perm(file, mask); 71.280 - } 71.281 -+EXPORT_SYMBOL(security_file_permission); 71.282 - 71.283 - int security_file_alloc(struct file *file) 71.284 - { 71.285 -@@ -638,6 +650,7 @@ int security_file_mmap(struct file *file, unsigned long reqprot, 71.286 - return ret; 71.287 - return ima_file_mmap(file, prot); 71.288 - } 71.289 -+EXPORT_SYMBOL(security_file_mmap); 71.290 - 71.291 - int security_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot, 71.292 - unsigned long prot)
72.1 --- a/kernel-modular/stuff/bootloader.sh Thu Jul 18 13:24:21 2013 +0000 72.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 72.3 @@ -1,218 +0,0 @@ 72.4 -#!/bin/sh 72.5 -# 72.6 -# This script creates a floppy image set from a linux bzImage and can merge 72.7 -# a cmdline and/or one or more initramfs. 72.8 -# The total size can not exceed 15M because INT 15H function 87H limitations. 72.9 -# 72.10 -# (C) 2009 Pascal Bellard - GNU General Public License v3. 72.11 - 72.12 -usage() 72.13 -{ 72.14 -cat <<EOT 72.15 -Usage: $0 bzImage [--prefix image_prefix] [--cmdline 'args'] 72.16 - [--rdev device] [--video mode] [--flags rootflags] [--tracks cnt] 72.17 - [--format 1440|1680|1920|2880 ] [--initrd initrdfile]... 72.18 - 72.19 -Default values: --format 1440 --tracks 80 --prefix floppy. 72.20 - 72.21 -Example: 72.22 -$0 /boot/vmlinuz-2.6.30.6 --rdev /dev/ram0 --video -3 --cmdline 'rw lang=fr_FR kmap=fr-latin1 laptop autologin' --initrd /boot/rootfs.gz --initrd ./myconfig.gz 72.23 -EOT 72.24 -exit 1 72.25 -} 72.26 - 72.27 -KERNEL="" 72.28 -INITRD="" 72.29 -CMDLINE="" 72.30 -PREFIX="floppy." 72.31 -FORMAT="1440" 72.32 -RDEV="" 72.33 -VIDEO="" 72.34 -FLAGS="" 72.35 -TRACKS="" 72.36 -DEBUG="" 72.37 -while [ -n "$1" ]; do 72.38 - case "$1" in 72.39 - --c*|-c*) CMDLINE="$2"; shift;; 72.40 - --i*|-i*) INITRD="$INITRD $2"; shift;; 72.41 - --p*|-p*) PREFIX="$2"; shift;; 72.42 - --fo*|-f*) FORMAT="$2"; shift;; 72.43 - --fl*) FLAGS="$2"; shift;; # 1 read-only, 0 read-write 72.44 - --r*|-r*) RDEV="$2"; shift;; # /dev/??? 72.45 - --v*|-v*) VIDEO="$2"; shift;; # -3 .. n 72.46 - --t*|-t*) TRACKS="$2"; shift;; # likely 81 .. 84 72.47 - --debug) DEBUG="1";; 72.48 - *) KERNEL="$1";; 72.49 - esac 72.50 - shift 72.51 -done 72.52 -[ -n "$KERNEL" -a -f "$KERNEL" ] || usage 72.53 -if [ -n "$TRACKS" ]; then 72.54 - if [ $(( $FORMAT % $TRACKS )) -ne 0 ]; then 72.55 - echo "Invalid track count for format $FORMAT." 72.56 - usage 72.57 - fi 72.58 -fi 72.59 - 72.60 -# write a 16 bits data 72.61 -# usage: store16 offset data16 file 72.62 -store16() 72.63 -{ 72.64 - echo $(( $2 + 0x10000 )) | \ 72.65 - awk '{ printf "\\\\x%02X\\\\x%02X",$1%256,($1/256)%256 }' | \ 72.66 - xargs echo -en | \ 72.67 - dd bs=2 conv=notrunc of=$3 seek=$(( $1 / 2 )) 2> /dev/null 72.68 - [ -n "$DEBUG" ] && printf "store16(%04X) = %04X\n" $1 $2 1>&2 72.69 -} 72.70 - 72.71 -# write a 32 bits data 72.72 -# usage: storelong offset data32 file 72.73 -storelong() 72.74 -{ 72.75 - echo $2 | awk '{ printf "\\\\x%02X\\\\x%02X\\\\x%02X\\\\x%02X", 72.76 - $1%256,($1/256)%256,($1/256/256)%256,($1/256/256/256)%256 }' | \ 72.77 - xargs echo -en | \ 72.78 - dd bs=4 conv=notrunc of=$3 seek=$(( $1 / 4 )) 2> /dev/null 72.79 - [ -n "$DEBUG" ] && printf "storelong(%04X) = %08X\n" $1 $2 1>&2 72.80 -} 72.81 - 72.82 -# read a 32 bits data 72.83 -# usage: getlong offset file 72.84 -getlong() 72.85 -{ 72.86 - dd if=$2 bs=1 skip=$(( $1 )) count=4 2> /dev/null | \ 72.87 - hexdump -e '"" 1/4 "%d" "\n"' 72.88 -} 72.89 - 72.90 -floppyset() 72.91 -{ 72.92 - # bzImage offsets 72.93 - CylinderCount=496 72.94 - SetupSzOfs=497 72.95 - FlagsOfs=498 72.96 - SyssizeOfs=500 72.97 - VideoModeOfs=506 72.98 - RootDevOfs=508 72.99 - CodeAdrOfs=0x214 72.100 - RamfsAdrOfs=0x218 72.101 - RamfsLenOfs=0x21C 72.102 - ArgPtrOfs=0x228 72.103 - 72.104 - # boot+setup address 72.105 - SetupBase=0x90000 72.106 - 72.107 - stacktop=0x9E00 72.108 - 72.109 - bs=/tmp/bs$$ 72.110 - 72.111 - # Get and patch boot sector 72.112 - # See http://hg.slitaz.org/wok/raw-file/711d076b277c/linux/stuff/linux-header-2.6.34.u 72.113 - dd if=$KERNEL bs=512 count=1 of=$bs 2> /dev/null 72.114 - uudecode <<EOT | dd of=$bs conv=notrunc 2> /dev/null 72.115 -begin-base64 644 - 72.116 -/L+6nWgAkAcGF4n8McC5HQDzq1sfD6mg8X1ABlfFd3ixBvOlZWaPR3gGH8ZF 72.117 -+D/6l1hB6DQBvgACA3QO6HYBWwseKAJ0LFNH6AoBXuhmAbAgzRCwCM0QTuhl 72.118 -ATwIdAOIBK05NigCdPDoPgE8CnXgiHz+ieb/TBD/TBi/9AGBTRz/gMdFMACc 72.119 -sBCxBUi0k4lEHLABiUQUmGaY0+BIZgMFZtPoaAAQB7+AACn4nHMCAccx21BW 72.120 -6J4AXrkAgLSH/kQczRVYnXfcoRoCvxwCsQk4RBxyuJPNE+oAACCQsEYoyL7b 72.121 -AejSAF3rI4D5E3IEOMF3a4D+AnIEOOZ3bGCB/QAGdCoGUlFTlrQCULEGtQTB 72.122 -xQSwDyHoBJAnFEAn6IwA/s117LAgzRDitOiWAJjNE2FSUCjIdwKwAZg5+HIC 72.123 -ifhQtALNE5VeWFpyoJVBjuGAxwJPdFFOdfSM4ZU4wXVFiMj+xrEBOOZ1O4j0 72.124 -/sW2AID9UHIwOi7wAXIqtQBgvt4B/kQMU+gxAFvoOAB1FlKYzRO4AQLNE1rQ 72.125 -1Dpk/nXqRgjkdeVh64sWB7AxLAO0DrsHAM0QPA1088OwDejv/6wIwHX4w79s 72.126 -BLFbZQINuA0BZToNdArNFnT0mM0Wju9Hw1g6AEluc2VydCBkaXNrIDEuBw0A 72.127 -AA== 72.128 -==== 72.129 -EOT 72.130 - 72.131 - # Get setup 72.132 - setupsz=$(getlong $SetupSzOfs $bs) 72.133 - setupszb=$(( $setupsz & 255 )) 72.134 - dd if=$KERNEL bs=512 skip=1 count=$setupszb 2> /dev/null >> $bs 72.135 - 72.136 - if [ -n "$TRACKS" ]; then 72.137 - [ -n "$DEBUG" ] && echo -n "--tracks " 1>&2 72.138 - n=$(getlong $CylinderCount $bs) 72.139 - store16 $CylinderCount $(( ($n & -256) + $TRACKS )) $bs 72.140 - fi 72.141 - if [ -n "$FLAGS" ]; then 72.142 - [ -n "$DEBUG" ] && echo -n "--flags " 1>&2 72.143 - store16 $FlagsOfs $FLAGS $bs 72.144 - fi 72.145 - if [ -n "$VIDEO" ]; then 72.146 - [ -n "$DEBUG" ] && echo -n "--video " 1>&2 72.147 - store16 $VideoModeOfs $VIDEO $bs 72.148 - fi 72.149 - if [ -n "$RDEV" ]; then 72.150 - [ -n "$DEBUG" ] && echo -n "--rdev " 1>&2 72.151 - n=$(stat -c '0x%02t%02T' $RDEV 2> /dev/null) 72.152 - [ -n "$n" ] || n=$RDEV 72.153 - store16 $RootDevOfs $n $bs 72.154 - fi 72.155 - 72.156 - # Store cmdline after setup 72.157 - if [ -n "$CMDLINE" ]; then 72.158 - [ -n "$DEBUG" ] && echo -n "--cmdline '$CMDLINE' " 1>&2 72.159 - echo -n "$CMDLINE" | dd bs=512 count=1 conv=sync 2> /dev/null >> $bs 72.160 - storelong $ArgPtrOfs $(( $SetupBase + $stacktop )) $bs 72.161 - fi 72.162 - 72.163 - # Compute initramfs size 72.164 - initrdlen=0 72.165 - padding=0 72.166 - for i in $( echo $INITRD | sed 's/,/ /' ); do 72.167 - [ -s "$i" ] || continue 72.168 - [ -n "$DEBUG" ] && echo "--initrd $i " 1>&2 72.169 - initrdlen=$(( $initrdlen + $padding )) 72.170 - padding=$(stat -c %s $i) 72.171 - initrdlen=$(( $initrdlen + $padding )) 72.172 - padding=$(( 4096 - ($padding & 4095) )) 72.173 - [ $padding -eq 4096 ] && padding=0 72.174 - done 72.175 - Ksize=$(( $(getlong $SyssizeOfs $bs)*16 )) 72.176 - Kpad=$(( (($Ksize+4095)/4096)*4096 - Ksize )) 72.177 - if [ $initrdlen -ne 0 ]; then 72.178 - [ -n "$DEBUG" ] && echo "initrdlen = $initrdlen " 1>&2 72.179 - Kbase=$(getlong $CodeAdrOfs $bs) 72.180 - storelong $RamfsAdrOfs \ 72.181 - $(( (0x1000000 - $initrdlen) & 0xFFFF0000 )) $bs 72.182 - storelong $RamfsLenOfs $(( ($initrdlen + 3) & -4 )) $bs 72.183 - fi 72.184 - 72.185 - # Output boot sector + setup + cmdline 72.186 - dd if=$bs 2> /dev/null 72.187 - 72.188 - # Output kernel code 72.189 - dd if=$KERNEL bs=512 skip=$(( $setupszb + 1 )) 2> /dev/null 72.190 - 72.191 - # Pad to next sector 72.192 - Kpad=$(( 512 - ($(stat -c %s $KERNEL) & 511) )) 72.193 - [ $Kpad -eq 512 ] || dd if=/dev/zero bs=1 count=$Kpad 2> /dev/null 72.194 - 72.195 - # Output initramfs 72.196 - padding=0 72.197 - for i in $( echo $INITRD | sed 's/,/ /' ); do 72.198 - [ -s "$i" ] || continue 72.199 - [ $padding -ne 0 ] && dd if=/dev/zero bs=1 count=$padding 2> /dev/null 72.200 - dd if=$i 2> /dev/null 72.201 - padding=$(( 4 - ($(stat -c %s $i) & 3) )) 72.202 - [ $padding -eq 4 ] && padding=0 72.203 - done 72.204 - 72.205 - # Cleanup 72.206 - rm -f $bs 72.207 -} 72.208 - 72.209 -if [ "$FORMAT" == "0" ]; then # unsplitted 72.210 - floppyset > $PREFIX 72.211 - exit 72.212 -fi 72.213 -floppyset | split -b ${FORMAT}k /dev/stdin floppy$$ 72.214 -i=1 72.215 -ls floppy$$* | while read file ; do 72.216 - output=$PREFIX$(printf "%03d" $i) 72.217 - cat $file /dev/zero | dd bs=1k count=$FORMAT conv=sync of=$output 2> /dev/null 72.218 - echo $output 72.219 - rm -f $file 72.220 - i=$(( $i + 1 )) 72.221 -done
73.1 --- a/kernel-modular/stuff/check_modules.sh Thu Jul 18 13:24:21 2013 +0000 73.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 73.3 @@ -1,51 +0,0 @@ 73.4 -#!/bin/sh 73.5 -# Echo any module in kernel .config that's not added to one of linux-* pkgs 73.6 -# (c) SliTaz - GNU General Public License. 73.7 -# 20090618 <jozee@slitaz.org> 73.8 -# 20100528 <pankso@slitaz.org> 73.9 -# 73.10 -. /etc/tazwok.conf 73.11 -VERSION=`grep ^VERSION= $WOK/linux/receipt | cut -d "=" -f2 | sed -e 's/"//g'` 73.12 -src="$WOK/linux/linux-$VERSION" 73.13 - 73.14 -cd $src 73.15 -mkdir -p ../stuff/tmp 73.16 -rm -f ../stuff/tmp/* 73.17 - 73.18 -echo -e "\nChecking for modules selected in .config but not in linux-* pkgs" 73.19 -echo "======================================================================" 73.20 - 73.21 -# create a packaged modules list 73.22 -cat ../stuff/modules-"$VERSION".list >> ../stuff/tmp/pkgs-modules-"$VERSION".list 73.23 - 73.24 -for i in $(cd $WOK; ls -d linux-*) 73.25 -do 73.26 - tazpath="taz/$i-$VERSION" 73.27 - for j in $(cat $WOK/$i/$tazpath/files.list | grep ".ko.gz") 73.28 - do 73.29 - basename $j >> ../stuff/tmp/pkgs-modules-"$VERSION".list 73.30 - done 73.31 -done 73.32 -# get the original list in .config 73.33 -for i in $(find $_pkg -iname "*.ko.gz") 73.34 -do 73.35 - basename $i >> ../stuff/tmp/originial-"$VERSION".list 73.36 -done 73.37 -# compare original .config and pkged modules 73.38 -for i in $(cat ../stuff/tmp/originial-$VERSION.list) 73.39 -do 73.40 - if ! grep -qs "$i" ../stuff/tmp/pkgs-modules-"$VERSION".list ; then 73.41 - modpath=`find $_pkg -iname "$i"` 73.42 - echo "Orphan module: $i" 73.43 - echo "$i : $modpath" >> ../stuff/tmp/unpackaged-modules-"$VERSION".list 73.44 - fi 73.45 -done 73.46 -if [ -f ../stuff/tmp/unpackaged-modules-"$VERSION".list ]; then 73.47 - echo "======================================================================" 73.48 - echo -e "Check linux/stuff/tmp/unpackaged-modules-$VERSION.list for mod path\n" 73.49 -else 73.50 - echo -e "\nAll modules are packaged\n" 73.51 - echo "======================================================================" 73.52 - echo "" 73.53 - rm -rf ../stuff/tmp 73.54 -fi
74.1 --- a/kernel-modular/stuff/gztazmod.sh Thu Jul 18 13:24:21 2013 +0000 74.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 74.3 @@ -1,67 +0,0 @@ 74.4 -#!/bin/sh 74.5 -# gztazmod.sh: Compress Linux kernel modules for SliTaz GNU/Linux. 74.6 -# 2007/10/04 <pankso@slitaz.org> - GNU General Public License. 74.7 -# 74.8 - 74.9 -# We do our work in the kernel version modules directory. 74.10 -if [ -z "$1" ] ; then 74.11 - echo "" 74.12 - echo -e "\033[1musage:\033[0m `basename $0` path/to/kernel-version" 74.13 - echo "" 74.14 - exit 1 74.15 -fi 74.16 - 74.17 -if [ ! -r "$1" ] ; then 74.18 - echo "" 74.19 - echo -e "Error : $1 does not exist." 74.20 - echo "" 74.21 - exit 1 74.22 -fi 74.23 - 74.24 -cd $1 74.25 - 74.26 -# Status functions. 74.27 -status() 74.28 -{ 74.29 - local CHECK=$? 74.30 - echo -en "\\033[70G[ " 74.31 - if [ $CHECK = 0 ]; then 74.32 - echo -en "\\033[1;33mOK" 74.33 - else 74.34 - echo -en "\\033[1;31mFailed" 74.35 - fi 74.36 - echo -e "\\033[0;39m ]" 74.37 -} 74.38 - 74.39 -# Script start. 74.40 -echo "" 74.41 -echo "Starting gztazmod.sh to build compressed kernel modules... " 74.42 -echo "" 74.43 - 74.44 -# Find all modules. 74.45 -echo -n "Searching all modules to compress them... " 74.46 -find . -name "*.ko" -exec lzma e '{}' '{}'.gz \; 2> /dev/null 74.47 -status 74.48 -find . -name "*.ko" -exec rm '{}' \; 74.49 - 74.50 -# Build a new temporary modules.dep. 74.51 -echo -n "Building tmp.dep... " 74.52 -sed 's/\.ko.gz/.ko/g' modules.dep > tmp.dep 74.53 -sed -i 's/\.ko.gz/.ko/g' tmp.dep 74.54 -sed -i 's/\.ko/.ko.gz/g' tmp.dep 74.55 -status 74.56 - 74.57 -# Destroy original modules.dep 74.58 -echo -n "Destroying modules.dep... " 74.59 -rm modules.dep 74.60 -status 74.61 - 74.62 -# Remove tmp.dep to modules.dep. 74.63 -echo -n "Removing tmp.dep to modules.dep... " 74.64 -mv tmp.dep modules.dep 74.65 -status 74.66 - 74.67 -# Script end. 74.68 -echo "" 74.69 -echo "Kernel modules `basename $1` are ready." 74.70 -echo ""
75.1 --- a/kernel-modular/stuff/linux-2.6.37-slitaz.config-i486-isa Thu Jul 18 13:24:21 2013 +0000 75.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 75.3 @@ -1,920 +0,0 @@ 75.4 -# 75.5 -# Automatically generated make config: don't edit 75.6 -# Linux/i386 2.6.37 Kernel Configuration 75.7 -# Tue May 3 12:16:19 2011 75.8 -# 75.9 -# CONFIG_64BIT is not set 75.10 -CONFIG_X86_32=y 75.11 -# CONFIG_X86_64 is not set 75.12 -CONFIG_X86=y 75.13 -CONFIG_INSTRUCTION_DECODER=y 75.14 -CONFIG_OUTPUT_FORMAT="elf32-i386" 75.15 -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" 75.16 -CONFIG_GENERIC_CMOS_UPDATE=y 75.17 -CONFIG_CLOCKSOURCE_WATCHDOG=y 75.18 -CONFIG_GENERIC_CLOCKEVENTS=y 75.19 -CONFIG_LOCKDEP_SUPPORT=y 75.20 -CONFIG_STACKTRACE_SUPPORT=y 75.21 -CONFIG_HAVE_LATENCYTOP_SUPPORT=y 75.22 -CONFIG_MMU=y 75.23 -CONFIG_ZONE_DMA=y 75.24 -# CONFIG_NEED_DMA_MAP_STATE is not set 75.25 -CONFIG_NEED_SG_DMA_LENGTH=y 75.26 -CONFIG_GENERIC_ISA_DMA=y 75.27 -CONFIG_GENERIC_IOMAP=y 75.28 -CONFIG_GENERIC_HWEIGHT=y 75.29 -CONFIG_ARCH_MAY_HAVE_PC_FDC=y 75.30 -CONFIG_RWSEM_GENERIC_SPINLOCK=y 75.31 -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set 75.32 -CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y 75.33 -CONFIG_GENERIC_CALIBRATE_DELAY=y 75.34 -# CONFIG_GENERIC_TIME_VSYSCALL is not set 75.35 -CONFIG_ARCH_HAS_CPU_RELAX=y 75.36 -CONFIG_ARCH_HAS_DEFAULT_IDLE=y 75.37 -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y 75.38 -CONFIG_HAVE_SETUP_PER_CPU_AREA=y 75.39 -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y 75.40 -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y 75.41 -# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set 75.42 -CONFIG_ARCH_HIBERNATION_POSSIBLE=y 75.43 -CONFIG_ARCH_SUSPEND_POSSIBLE=y 75.44 -# CONFIG_ZONE_DMA32 is not set 75.45 -CONFIG_ARCH_POPULATES_NODE_MAP=y 75.46 -# CONFIG_AUDIT_ARCH is not set 75.47 -CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y 75.48 -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y 75.49 -CONFIG_X86_32_LAZY_GS=y 75.50 -CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" 75.51 -CONFIG_KTIME_SCALAR=y 75.52 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" 75.53 -CONFIG_CONSTRUCTORS=y 75.54 -CONFIG_HAVE_IRQ_WORK=y 75.55 -CONFIG_IRQ_WORK=y 75.56 - 75.57 -# 75.58 -# General setup 75.59 -# 75.60 -CONFIG_EXPERIMENTAL=y 75.61 -CONFIG_BROKEN_ON_SMP=y 75.62 -CONFIG_INIT_ENV_ARG_LIMIT=32 75.63 -CONFIG_CROSS_COMPILE="" 75.64 -CONFIG_LOCALVERSION="-slitaz" 75.65 -# CONFIG_LOCALVERSION_AUTO is not set 75.66 -CONFIG_HAVE_KERNEL_GZIP=y 75.67 -CONFIG_HAVE_KERNEL_BZIP2=y 75.68 -CONFIG_HAVE_KERNEL_LZMA=y 75.69 -CONFIG_HAVE_KERNEL_XZ=y 75.70 -CONFIG_HAVE_KERNEL_LZO=y 75.71 -# CONFIG_KERNEL_GZIP is not set 75.72 -# CONFIG_KERNEL_BZIP2 is not set 75.73 -CONFIG_KERNEL_LZMA=y 75.74 -# CONFIG_KERNEL_XZ is not set 75.75 -# CONFIG_KERNEL_LZO is not set 75.76 -# CONFIG_SWAP is not set 75.77 -CONFIG_SYSVIPC=y 75.78 -CONFIG_SYSVIPC_SYSCTL=y 75.79 -# CONFIG_POSIX_MQUEUE is not set 75.80 -# CONFIG_BSD_PROCESS_ACCT is not set 75.81 -# CONFIG_TASKSTATS is not set 75.82 -# CONFIG_AUDIT is not set 75.83 -CONFIG_HAVE_GENERIC_HARDIRQS=y 75.84 - 75.85 -# 75.86 -# IRQ subsystem 75.87 -# 75.88 -CONFIG_GENERIC_HARDIRQS=y 75.89 -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y 75.90 -# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set 75.91 -CONFIG_HAVE_SPARSE_IRQ=y 75.92 -CONFIG_GENERIC_IRQ_PROBE=y 75.93 -# CONFIG_GENERIC_PENDING_IRQ is not set 75.94 -# CONFIG_AUTO_IRQ_AFFINITY is not set 75.95 -# CONFIG_IRQ_PER_CPU is not set 75.96 -# CONFIG_HARDIRQS_SW_RESEND is not set 75.97 -# CONFIG_SPARSE_IRQ is not set 75.98 - 75.99 -# 75.100 -# RCU Subsystem 75.101 -# 75.102 -CONFIG_TINY_RCU=y 75.103 -# CONFIG_PREEMPT_RCU is not set 75.104 -# CONFIG_TREE_RCU_TRACE is not set 75.105 -# CONFIG_IKCONFIG is not set 75.106 -CONFIG_LOG_BUF_SHIFT=12 75.107 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y 75.108 -# CONFIG_NAMESPACES is not set 75.109 -# CONFIG_RELAY is not set 75.110 -CONFIG_BLK_DEV_INITRD=y 75.111 -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" 75.112 -CONFIG_INITRAMFS_ROOT_UID=0 75.113 -CONFIG_INITRAMFS_ROOT_GID=0 75.114 -# CONFIG_RD_GZIP is not set 75.115 -# CONFIG_RD_BZIP2 is not set 75.116 -CONFIG_RD_LZMA=y 75.117 -# CONFIG_RD_LZO is not set 75.118 -CONFIG_INITRAMFS_COMPRESSION_NONE=y 75.119 -# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set 75.120 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y 75.121 -CONFIG_SYSCTL=y 75.122 -CONFIG_ANON_INODES=y 75.123 -CONFIG_EMBEDDED=y 75.124 -# CONFIG_UID16 is not set 75.125 -# CONFIG_SYSCTL_SYSCALL is not set 75.126 -# CONFIG_KALLSYMS is not set 75.127 -# CONFIG_HOTPLUG is not set 75.128 -CONFIG_PRINTK=y 75.129 -# CONFIG_BUG is not set 75.130 -# CONFIG_ELF_CORE is not set 75.131 -CONFIG_PCSPKR_PLATFORM=y 75.132 -# CONFIG_BASE_FULL is not set 75.133 -CONFIG_FUTEX=y 75.134 -# CONFIG_EPOLL is not set 75.135 -# CONFIG_SIGNALFD is not set 75.136 -# CONFIG_TIMERFD is not set 75.137 -# CONFIG_EVENTFD is not set 75.138 -# CONFIG_SHMEM is not set 75.139 -# CONFIG_AIO is not set 75.140 -CONFIG_HAVE_PERF_EVENTS=y 75.141 - 75.142 -# 75.143 -# Kernel Performance Events And Counters 75.144 -# 75.145 -CONFIG_PERF_EVENTS=y 75.146 -# CONFIG_PERF_COUNTERS is not set 75.147 -# CONFIG_VM_EVENT_COUNTERS is not set 75.148 -CONFIG_COMPAT_BRK=y 75.149 -# CONFIG_SLAB is not set 75.150 -# CONFIG_SLUB is not set 75.151 -CONFIG_SLOB=y 75.152 -# CONFIG_PROFILING is not set 75.153 -CONFIG_HAVE_OPROFILE=y 75.154 -# CONFIG_JUMP_LABEL is not set 75.155 -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y 75.156 -CONFIG_HAVE_IOREMAP_PROT=y 75.157 -CONFIG_HAVE_KPROBES=y 75.158 -CONFIG_HAVE_KRETPROBES=y 75.159 -CONFIG_HAVE_OPTPROBES=y 75.160 -CONFIG_HAVE_ARCH_TRACEHOOK=y 75.161 -CONFIG_HAVE_DMA_ATTRS=y 75.162 -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y 75.163 -CONFIG_HAVE_DMA_API_DEBUG=y 75.164 -CONFIG_HAVE_HW_BREAKPOINT=y 75.165 -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y 75.166 -CONFIG_HAVE_USER_RETURN_NOTIFIER=y 75.167 -CONFIG_HAVE_PERF_EVENTS_NMI=y 75.168 -CONFIG_HAVE_ARCH_JUMP_LABEL=y 75.169 - 75.170 -# 75.171 -# GCOV-based kernel profiling 75.172 -# 75.173 -CONFIG_HAVE_GENERIC_DMA_COHERENT=y 75.174 -CONFIG_RT_MUTEXES=y 75.175 -CONFIG_BASE_SMALL=1 75.176 -# CONFIG_MODULES is not set 75.177 -CONFIG_BLOCK=y 75.178 -# CONFIG_LBDAF is not set 75.179 -# CONFIG_BLK_DEV_BSG is not set 75.180 -# CONFIG_BLK_DEV_INTEGRITY is not set 75.181 - 75.182 -# 75.183 -# IO Schedulers 75.184 -# 75.185 -CONFIG_IOSCHED_NOOP=y 75.186 -# CONFIG_IOSCHED_DEADLINE is not set 75.187 -# CONFIG_IOSCHED_CFQ is not set 75.188 -CONFIG_DEFAULT_NOOP=y 75.189 -CONFIG_DEFAULT_IOSCHED="noop" 75.190 -# CONFIG_INLINE_SPIN_TRYLOCK is not set 75.191 -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set 75.192 -# CONFIG_INLINE_SPIN_LOCK is not set 75.193 -# CONFIG_INLINE_SPIN_LOCK_BH is not set 75.194 -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set 75.195 -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set 75.196 -CONFIG_INLINE_SPIN_UNLOCK=y 75.197 -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set 75.198 -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y 75.199 -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set 75.200 -# CONFIG_INLINE_READ_TRYLOCK is not set 75.201 -# CONFIG_INLINE_READ_LOCK is not set 75.202 -# CONFIG_INLINE_READ_LOCK_BH is not set 75.203 -# CONFIG_INLINE_READ_LOCK_IRQ is not set 75.204 -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set 75.205 -CONFIG_INLINE_READ_UNLOCK=y 75.206 -# CONFIG_INLINE_READ_UNLOCK_BH is not set 75.207 -CONFIG_INLINE_READ_UNLOCK_IRQ=y 75.208 -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set 75.209 -# CONFIG_INLINE_WRITE_TRYLOCK is not set 75.210 -# CONFIG_INLINE_WRITE_LOCK is not set 75.211 -# CONFIG_INLINE_WRITE_LOCK_BH is not set 75.212 -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set 75.213 -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set 75.214 -CONFIG_INLINE_WRITE_UNLOCK=y 75.215 -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set 75.216 -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y 75.217 -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set 75.218 -# CONFIG_MUTEX_SPIN_ON_OWNER is not set 75.219 -# CONFIG_FREEZER is not set 75.220 - 75.221 -# 75.222 -# Processor type and features 75.223 -# 75.224 -# CONFIG_NO_HZ is not set 75.225 -# CONFIG_HIGH_RES_TIMERS is not set 75.226 -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y 75.227 -# CONFIG_SMP is not set 75.228 -# CONFIG_X86_EXTENDED_PLATFORM is not set 75.229 -CONFIG_SCHED_OMIT_FRAME_POINTER=y 75.230 -# CONFIG_PARAVIRT_GUEST is not set 75.231 -CONFIG_NO_BOOTMEM=y 75.232 -# CONFIG_MEMTEST is not set 75.233 -CONFIG_M386=y 75.234 -# CONFIG_M486 is not set 75.235 -# CONFIG_M586 is not set 75.236 -# CONFIG_M586TSC is not set 75.237 -# CONFIG_M586MMX is not set 75.238 -# CONFIG_M686 is not set 75.239 -# CONFIG_MPENTIUMII is not set 75.240 -# CONFIG_MPENTIUMIII is not set 75.241 -# CONFIG_MPENTIUMM is not set 75.242 -# CONFIG_MPENTIUM4 is not set 75.243 -# CONFIG_MK6 is not set 75.244 -# CONFIG_MK7 is not set 75.245 -# CONFIG_MK8 is not set 75.246 -# CONFIG_MCRUSOE is not set 75.247 -# CONFIG_MEFFICEON is not set 75.248 -# CONFIG_MWINCHIPC6 is not set 75.249 -# CONFIG_MWINCHIP3D is not set 75.250 -# CONFIG_MGEODEGX1 is not set 75.251 -# CONFIG_MGEODE_LX is not set 75.252 -# CONFIG_MCYRIXIII is not set 75.253 -# CONFIG_MVIAC3_2 is not set 75.254 -# CONFIG_MVIAC7 is not set 75.255 -# CONFIG_MCORE2 is not set 75.256 -# CONFIG_MATOM is not set 75.257 -# CONFIG_X86_GENERIC is not set 75.258 -CONFIG_X86_CPU=y 75.259 -CONFIG_X86_INTERNODE_CACHE_SHIFT=4 75.260 -# CONFIG_X86_CMPXCHG is not set 75.261 -CONFIG_X86_L1_CACHE_SHIFT=4 75.262 -# CONFIG_X86_PPRO_FENCE is not set 75.263 -CONFIG_X86_F00F_BUG=y 75.264 -CONFIG_X86_INVD_BUG=y 75.265 -CONFIG_X86_MINIMUM_CPU_FAMILY=3 75.266 -# CONFIG_PROCESSOR_SELECT is not set 75.267 -CONFIG_CPU_SUP_INTEL=y 75.268 -CONFIG_CPU_SUP_CYRIX_32=y 75.269 -CONFIG_CPU_SUP_AMD=y 75.270 -CONFIG_CPU_SUP_CENTAUR=y 75.271 -CONFIG_CPU_SUP_TRANSMETA_32=y 75.272 -CONFIG_CPU_SUP_UMC_32=y 75.273 -# CONFIG_HPET_TIMER is not set 75.274 -# CONFIG_DMI is not set 75.275 -# CONFIG_IOMMU_HELPER is not set 75.276 -# CONFIG_IOMMU_API is not set 75.277 -CONFIG_NR_CPUS=1 75.278 -# CONFIG_IRQ_TIME_ACCOUNTING is not set 75.279 -CONFIG_PREEMPT_NONE=y 75.280 -# CONFIG_PREEMPT_VOLUNTARY is not set 75.281 -# CONFIG_PREEMPT is not set 75.282 -# CONFIG_X86_UP_APIC is not set 75.283 -# CONFIG_X86_MCE is not set 75.284 -# CONFIG_VM86 is not set 75.285 -# CONFIG_TOSHIBA is not set 75.286 -# CONFIG_I8K is not set 75.287 -# CONFIG_X86_REBOOTFIXUPS is not set 75.288 -# CONFIG_MICROCODE is not set 75.289 -# CONFIG_X86_MSR is not set 75.290 -# CONFIG_X86_CPUID is not set 75.291 -CONFIG_NOHIGHMEM=y 75.292 -# CONFIG_HIGHMEM4G is not set 75.293 -CONFIG_VMSPLIT_3G=y 75.294 -# CONFIG_VMSPLIT_3G_OPT is not set 75.295 -# CONFIG_VMSPLIT_2G is not set 75.296 -# CONFIG_VMSPLIT_2G_OPT is not set 75.297 -# CONFIG_VMSPLIT_1G is not set 75.298 -CONFIG_PAGE_OFFSET=0xC0000000 75.299 -# CONFIG_X86_PAE is not set 75.300 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set 75.301 -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set 75.302 -CONFIG_ARCH_FLATMEM_ENABLE=y 75.303 -CONFIG_ARCH_SPARSEMEM_ENABLE=y 75.304 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y 75.305 -CONFIG_ILLEGAL_POINTER_VALUE=0 75.306 -CONFIG_SELECT_MEMORY_MODEL=y 75.307 -CONFIG_FLATMEM_MANUAL=y 75.308 -# CONFIG_SPARSEMEM_MANUAL is not set 75.309 -CONFIG_FLATMEM=y 75.310 -CONFIG_FLAT_NODE_MEM_MAP=y 75.311 -CONFIG_SPARSEMEM_STATIC=y 75.312 -CONFIG_HAVE_MEMBLOCK=y 75.313 -CONFIG_PAGEFLAGS_EXTENDED=y 75.314 -CONFIG_SPLIT_PTLOCK_CPUS=4 75.315 -# CONFIG_PHYS_ADDR_T_64BIT is not set 75.316 -CONFIG_ZONE_DMA_FLAG=1 75.317 -CONFIG_BOUNCE=y 75.318 -CONFIG_VIRT_TO_BUS=y 75.319 -# CONFIG_KSM is not set 75.320 -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 75.321 -CONFIG_NEED_PER_CPU_KM=y 75.322 -# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set 75.323 -CONFIG_X86_RESERVE_LOW=64 75.324 -CONFIG_MATH_EMULATION=y 75.325 -# CONFIG_MTRR is not set 75.326 -# CONFIG_SECCOMP is not set 75.327 -# CONFIG_CC_STACKPROTECTOR is not set 75.328 -CONFIG_HZ_100=y 75.329 -# CONFIG_HZ_250 is not set 75.330 -# CONFIG_HZ_300 is not set 75.331 -# CONFIG_HZ_1000 is not set 75.332 -CONFIG_HZ=100 75.333 -# CONFIG_SCHED_HRTICK is not set 75.334 -# CONFIG_KEXEC is not set 75.335 -CONFIG_PHYSICAL_START=0x100000 75.336 -# CONFIG_RELOCATABLE is not set 75.337 -CONFIG_PHYSICAL_ALIGN=0x100000 75.338 -# CONFIG_COMPAT_VDSO is not set 75.339 -# CONFIG_CMDLINE_BOOL is not set 75.340 - 75.341 -# 75.342 -# Power management and ACPI options 75.343 -# 75.344 -# CONFIG_PM is not set 75.345 -# CONFIG_SFI is not set 75.346 - 75.347 -# 75.348 -# CPU Frequency scaling 75.349 -# 75.350 -# CONFIG_CPU_FREQ is not set 75.351 -# CONFIG_CPU_IDLE is not set 75.352 - 75.353 -# 75.354 -# Bus options (PCI etc.) 75.355 -# 75.356 -# CONFIG_PCI is not set 75.357 -# CONFIG_ARCH_SUPPORTS_MSI is not set 75.358 -CONFIG_ISA_DMA_API=y 75.359 -CONFIG_ISA=y 75.360 -# CONFIG_EISA is not set 75.361 -# CONFIG_MCA is not set 75.362 -# CONFIG_SCx200 is not set 75.363 -# CONFIG_OLPC is not set 75.364 -# CONFIG_OLPC_OPENFIRMWARE is not set 75.365 - 75.366 -# 75.367 -# Executable file formats / Emulations 75.368 -# 75.369 -CONFIG_BINFMT_ELF=y 75.370 -CONFIG_HAVE_AOUT=y 75.371 -# CONFIG_BINFMT_AOUT is not set 75.372 -# CONFIG_BINFMT_MISC is not set 75.373 -CONFIG_HAVE_ATOMIC_IOMAP=y 75.374 -CONFIG_HAVE_TEXT_POKE_SMP=y 75.375 -CONFIG_NET=y 75.376 - 75.377 -# 75.378 -# Networking options 75.379 -# 75.380 -CONFIG_PACKET=y 75.381 -CONFIG_UNIX=y 75.382 -# CONFIG_NET_KEY is not set 75.383 -CONFIG_INET=y 75.384 -# CONFIG_IP_MULTICAST is not set 75.385 -# CONFIG_IP_ADVANCED_ROUTER is not set 75.386 -CONFIG_IP_FIB_HASH=y 75.387 -# CONFIG_IP_PNP is not set 75.388 -# CONFIG_NET_IPIP is not set 75.389 -# CONFIG_NET_IPGRE_DEMUX is not set 75.390 -# CONFIG_ARPD is not set 75.391 -# CONFIG_SYN_COOKIES is not set 75.392 -# CONFIG_INET_AH is not set 75.393 -# CONFIG_INET_ESP is not set 75.394 -# CONFIG_INET_IPCOMP is not set 75.395 -# CONFIG_INET_XFRM_TUNNEL is not set 75.396 -# CONFIG_INET_TUNNEL is not set 75.397 -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set 75.398 -# CONFIG_INET_XFRM_MODE_TUNNEL is not set 75.399 -# CONFIG_INET_XFRM_MODE_BEET is not set 75.400 -# CONFIG_INET_LRO is not set 75.401 -# CONFIG_INET_DIAG is not set 75.402 -# CONFIG_TCP_CONG_ADVANCED is not set 75.403 -CONFIG_TCP_CONG_CUBIC=y 75.404 -CONFIG_DEFAULT_TCP_CONG="cubic" 75.405 -# CONFIG_TCP_MD5SIG is not set 75.406 -# CONFIG_IPV6 is not set 75.407 -# CONFIG_NETWORK_SECMARK is not set 75.408 -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set 75.409 -# CONFIG_NETFILTER is not set 75.410 -# CONFIG_IP_DCCP is not set 75.411 -# CONFIG_IP_SCTP is not set 75.412 -# CONFIG_RDS is not set 75.413 -# CONFIG_TIPC is not set 75.414 -# CONFIG_ATM is not set 75.415 -# CONFIG_L2TP is not set 75.416 -# CONFIG_BRIDGE is not set 75.417 -# CONFIG_NET_DSA is not set 75.418 -# CONFIG_VLAN_8021Q is not set 75.419 -# CONFIG_DECNET is not set 75.420 -# CONFIG_LLC2 is not set 75.421 -# CONFIG_IPX is not set 75.422 -# CONFIG_ATALK is not set 75.423 -# CONFIG_X25 is not set 75.424 -# CONFIG_LAPB is not set 75.425 -# CONFIG_ECONET is not set 75.426 -# CONFIG_WAN_ROUTER is not set 75.427 -# CONFIG_PHONET is not set 75.428 -# CONFIG_IEEE802154 is not set 75.429 -# CONFIG_NET_SCHED is not set 75.430 -# CONFIG_DCB is not set 75.431 - 75.432 -# 75.433 -# Network testing 75.434 -# 75.435 -# CONFIG_NET_PKTGEN is not set 75.436 -# CONFIG_HAMRADIO is not set 75.437 -# CONFIG_CAN is not set 75.438 -# CONFIG_IRDA is not set 75.439 -# CONFIG_BT is not set 75.440 -# CONFIG_AF_RXRPC is not set 75.441 -# CONFIG_WIRELESS is not set 75.442 -# CONFIG_WIMAX is not set 75.443 -# CONFIG_RFKILL is not set 75.444 -# CONFIG_NET_9P is not set 75.445 -# CONFIG_CAIF is not set 75.446 -# CONFIG_CEPH_LIB is not set 75.447 - 75.448 -# 75.449 -# Device Drivers 75.450 -# 75.451 - 75.452 -# 75.453 -# Generic Driver Options 75.454 -# 75.455 -CONFIG_STANDALONE=y 75.456 -CONFIG_PREVENT_FIRMWARE_BUILD=y 75.457 -CONFIG_FW_LOADER=y 75.458 -CONFIG_FIRMWARE_IN_KERNEL=y 75.459 -CONFIG_EXTRA_FIRMWARE="" 75.460 -# CONFIG_SYS_HYPERVISOR is not set 75.461 -# CONFIG_CONNECTOR is not set 75.462 -# CONFIG_MTD is not set 75.463 -# CONFIG_PARPORT is not set 75.464 -# CONFIG_PNP is not set 75.465 -CONFIG_BLK_DEV=y 75.466 -CONFIG_BLK_DEV_FD=y 75.467 -# CONFIG_BLK_DEV_XD is not set 75.468 -# CONFIG_BLK_DEV_COW_COMMON is not set 75.469 -# CONFIG_BLK_DEV_LOOP is not set 75.470 - 75.471 -# 75.472 -# DRBD disabled because PROC_FS, INET or CONNECTOR not selected 75.473 -# 75.474 -# CONFIG_BLK_DEV_NBD is not set 75.475 -# CONFIG_BLK_DEV_RAM is not set 75.476 -# CONFIG_CDROM_PKTCDVD is not set 75.477 -# CONFIG_ATA_OVER_ETH is not set 75.478 -# CONFIG_BLK_DEV_HD is not set 75.479 -# CONFIG_BLK_DEV_RBD is not set 75.480 -# CONFIG_MISC_DEVICES is not set 75.481 -CONFIG_HAVE_IDE=y 75.482 -CONFIG_IDE=y 75.483 - 75.484 -# 75.485 -# Please see Documentation/ide/ide.txt for help/info on IDE drives 75.486 -# 75.487 -# CONFIG_BLK_DEV_IDE_SATA is not set 75.488 -# CONFIG_IDE_GD is not set 75.489 -# CONFIG_BLK_DEV_IDECD is not set 75.490 -# CONFIG_BLK_DEV_IDETAPE is not set 75.491 -# CONFIG_IDE_TASK_IOCTL is not set 75.492 -# CONFIG_IDE_PROC_FS is not set 75.493 - 75.494 -# 75.495 -# IDE chipset support/bugfixes 75.496 -# 75.497 -CONFIG_IDE_GENERIC=y 75.498 -# CONFIG_BLK_DEV_PLATFORM is not set 75.499 -# CONFIG_BLK_DEV_CMD640 is not set 75.500 - 75.501 -# 75.502 -# Other IDE chipsets support 75.503 -# 75.504 - 75.505 -# 75.506 -# Note: most of these also require special kernel boot parameters 75.507 -# 75.508 -# CONFIG_BLK_DEV_4DRIVES is not set 75.509 -# CONFIG_BLK_DEV_ALI14XX is not set 75.510 -# CONFIG_BLK_DEV_DTC2278 is not set 75.511 -# CONFIG_BLK_DEV_HT6560B is not set 75.512 -# CONFIG_BLK_DEV_QD65XX is not set 75.513 -# CONFIG_BLK_DEV_UMC8672 is not set 75.514 -# CONFIG_BLK_DEV_IDEDMA is not set 75.515 - 75.516 -# 75.517 -# SCSI device support 75.518 -# 75.519 -CONFIG_SCSI_MOD=y 75.520 -# CONFIG_RAID_ATTRS is not set 75.521 -# CONFIG_SCSI is not set 75.522 -# CONFIG_SCSI_DMA is not set 75.523 -# CONFIG_SCSI_NETLINK is not set 75.524 -# CONFIG_ATA is not set 75.525 -# CONFIG_MD is not set 75.526 -# CONFIG_MACINTOSH_DRIVERS is not set 75.527 -CONFIG_NETDEVICES=y 75.528 -# CONFIG_DUMMY is not set 75.529 -# CONFIG_BONDING is not set 75.530 -# CONFIG_MACVLAN is not set 75.531 -# CONFIG_EQUALIZER is not set 75.532 -# CONFIG_TUN is not set 75.533 -# CONFIG_VETH is not set 75.534 -# CONFIG_ARCNET is not set 75.535 -# CONFIG_MII is not set 75.536 -# CONFIG_PHYLIB is not set 75.537 -CONFIG_NET_ETHERNET=y 75.538 -CONFIG_NET_VENDOR_3COM=y 75.539 -# CONFIG_EL1 is not set 75.540 -# CONFIG_EL2 is not set 75.541 -# CONFIG_ELPLUS is not set 75.542 -# CONFIG_EL16 is not set 75.543 -CONFIG_EL3=y 75.544 -# CONFIG_3C515 is not set 75.545 -# CONFIG_LANCE is not set 75.546 -# CONFIG_NET_VENDOR_SMC is not set 75.547 -# CONFIG_ETHOC is not set 75.548 -# CONFIG_NET_VENDOR_RACAL is not set 75.549 -# CONFIG_DNET is not set 75.550 -# CONFIG_AT1700 is not set 75.551 -# CONFIG_DEPCA is not set 75.552 -# CONFIG_HP100 is not set 75.553 -CONFIG_NET_ISA=y 75.554 -# CONFIG_E2100 is not set 75.555 -# CONFIG_EWRK3 is not set 75.556 -# CONFIG_EEXPRESS is not set 75.557 -# CONFIG_EEXPRESS_PRO is not set 75.558 -# CONFIG_HPLAN_PLUS is not set 75.559 -# CONFIG_HPLAN is not set 75.560 -# CONFIG_LP486E is not set 75.561 -# CONFIG_ETH16I is not set 75.562 -CONFIG_NE2000=y 75.563 -# CONFIG_ZNET is not set 75.564 -# CONFIG_SEEQ8005 is not set 75.565 -# CONFIG_IBM_NEW_EMAC_ZMII is not set 75.566 -# CONFIG_IBM_NEW_EMAC_RGMII is not set 75.567 -# CONFIG_IBM_NEW_EMAC_TAH is not set 75.568 -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set 75.569 -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set 75.570 -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set 75.571 -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set 75.572 -# CONFIG_NET_PCI is not set 75.573 -# CONFIG_B44 is not set 75.574 -# CONFIG_CS89x0 is not set 75.575 -# CONFIG_KS8851_MLL is not set 75.576 -# CONFIG_NETDEV_1000 is not set 75.577 -# CONFIG_NETDEV_10000 is not set 75.578 -# CONFIG_TR is not set 75.579 -# CONFIG_WLAN is not set 75.580 - 75.581 -# 75.582 -# Enable WiMAX (Networking options) to see the WiMAX drivers 75.583 -# 75.584 -# CONFIG_WAN is not set 75.585 - 75.586 -# 75.587 -# CAIF transport drivers 75.588 -# 75.589 -CONFIG_PPP=y 75.590 -# CONFIG_PPP_MULTILINK is not set 75.591 -# CONFIG_PPP_FILTER is not set 75.592 -CONFIG_PPP_ASYNC=y 75.593 -# CONFIG_PPP_SYNC_TTY is not set 75.594 -CONFIG_PPP_DEFLATE=y 75.595 -# CONFIG_PPP_BSDCOMP is not set 75.596 -# CONFIG_PPP_MPPE is not set 75.597 -CONFIG_PPPOE=y 75.598 -# CONFIG_SLIP is not set 75.599 -CONFIG_SLHC=y 75.600 -# CONFIG_NETCONSOLE is not set 75.601 -# CONFIG_NETPOLL is not set 75.602 -# CONFIG_NET_POLL_CONTROLLER is not set 75.603 -# CONFIG_ISDN is not set 75.604 -# CONFIG_PHONE is not set 75.605 - 75.606 -# 75.607 -# Input device support 75.608 -# 75.609 -CONFIG_INPUT=y 75.610 -# CONFIG_INPUT_FF_MEMLESS is not set 75.611 -# CONFIG_INPUT_POLLDEV is not set 75.612 -# CONFIG_INPUT_SPARSEKMAP is not set 75.613 - 75.614 -# 75.615 -# Userland interfaces 75.616 -# 75.617 -# CONFIG_INPUT_MOUSEDEV is not set 75.618 -# CONFIG_INPUT_JOYDEV is not set 75.619 -# CONFIG_INPUT_EVDEV is not set 75.620 -# CONFIG_INPUT_EVBUG is not set 75.621 - 75.622 -# 75.623 -# Input Device Drivers 75.624 -# 75.625 -CONFIG_INPUT_KEYBOARD=y 75.626 -CONFIG_KEYBOARD_ATKBD=y 75.627 -# CONFIG_KEYBOARD_LKKBD is not set 75.628 -# CONFIG_KEYBOARD_NEWTON is not set 75.629 -# CONFIG_KEYBOARD_OPENCORES is not set 75.630 -# CONFIG_KEYBOARD_STOWAWAY is not set 75.631 -# CONFIG_KEYBOARD_SUNKBD is not set 75.632 -# CONFIG_KEYBOARD_XTKBD is not set 75.633 -# CONFIG_INPUT_MOUSE is not set 75.634 -# CONFIG_INPUT_JOYSTICK is not set 75.635 -# CONFIG_INPUT_TABLET is not set 75.636 -# CONFIG_INPUT_TOUCHSCREEN is not set 75.637 -# CONFIG_INPUT_MISC is not set 75.638 - 75.639 -# 75.640 -# Hardware I/O ports 75.641 -# 75.642 -CONFIG_SERIO=y 75.643 -CONFIG_SERIO_I8042=y 75.644 -# CONFIG_SERIO_SERPORT is not set 75.645 -# CONFIG_SERIO_CT82C710 is not set 75.646 -CONFIG_SERIO_LIBPS2=y 75.647 -# CONFIG_SERIO_RAW is not set 75.648 -# CONFIG_SERIO_ALTERA_PS2 is not set 75.649 -# CONFIG_SERIO_PS2MULT is not set 75.650 -# CONFIG_GAMEPORT is not set 75.651 - 75.652 -# 75.653 -# Character devices 75.654 -# 75.655 -CONFIG_VT=y 75.656 -CONFIG_CONSOLE_TRANSLATIONS=y 75.657 -CONFIG_VT_CONSOLE=y 75.658 -CONFIG_HW_CONSOLE=y 75.659 -# CONFIG_VT_HW_CONSOLE_BINDING is not set 75.660 -# CONFIG_DEVKMEM is not set 75.661 -# CONFIG_SERIAL_NONSTANDARD is not set 75.662 -# CONFIG_N_GSM is not set 75.663 - 75.664 -# 75.665 -# Serial drivers 75.666 -# 75.667 -CONFIG_SERIAL_8250=y 75.668 -# CONFIG_SERIAL_8250_CONSOLE is not set 75.669 -CONFIG_FIX_EARLYCON_MEM=y 75.670 -CONFIG_SERIAL_8250_NR_UARTS=2 75.671 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 75.672 -# CONFIG_SERIAL_8250_EXTENDED is not set 75.673 - 75.674 -# 75.675 -# Non-8250 serial port support 75.676 -# 75.677 -CONFIG_SERIAL_CORE=y 75.678 -# CONFIG_SERIAL_TIMBERDALE is not set 75.679 -# CONFIG_SERIAL_ALTERA_JTAGUART is not set 75.680 -# CONFIG_SERIAL_ALTERA_UART is not set 75.681 -CONFIG_UNIX98_PTYS=y 75.682 -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set 75.683 -# CONFIG_LEGACY_PTYS is not set 75.684 -# CONFIG_TTY_PRINTK is not set 75.685 -# CONFIG_IPMI_HANDLER is not set 75.686 -# CONFIG_HW_RANDOM is not set 75.687 -# CONFIG_NVRAM is not set 75.688 -# CONFIG_RTC is not set 75.689 -# CONFIG_GEN_RTC is not set 75.690 -# CONFIG_DTLK is not set 75.691 -# CONFIG_R3964 is not set 75.692 -# CONFIG_MWAVE is not set 75.693 -# CONFIG_PC8736x_GPIO is not set 75.694 -# CONFIG_NSC_GPIO is not set 75.695 -# CONFIG_CS5535_GPIO is not set 75.696 -# CONFIG_RAW_DRIVER is not set 75.697 -# CONFIG_HANGCHECK_TIMER is not set 75.698 -# CONFIG_TCG_TPM is not set 75.699 -# CONFIG_TELCLOCK is not set 75.700 -CONFIG_DEVPORT=y 75.701 -# CONFIG_RAMOOPS is not set 75.702 -# CONFIG_I2C is not set 75.703 -# CONFIG_SPI is not set 75.704 - 75.705 -# 75.706 -# PPS support 75.707 -# 75.708 -# CONFIG_PPS is not set 75.709 -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y 75.710 -# CONFIG_GPIOLIB is not set 75.711 -# CONFIG_W1 is not set 75.712 -# CONFIG_POWER_SUPPLY is not set 75.713 -# CONFIG_HWMON is not set 75.714 -# CONFIG_THERMAL is not set 75.715 -# CONFIG_WATCHDOG is not set 75.716 -CONFIG_SSB_POSSIBLE=y 75.717 - 75.718 -# 75.719 -# Sonics Silicon Backplane 75.720 -# 75.721 -# CONFIG_SSB is not set 75.722 -# CONFIG_MFD_SUPPORT is not set 75.723 -# CONFIG_REGULATOR is not set 75.724 -# CONFIG_MEDIA_SUPPORT is not set 75.725 - 75.726 -# 75.727 -# Graphics support 75.728 -# 75.729 -# CONFIG_DRM is not set 75.730 -# CONFIG_VGASTATE is not set 75.731 -# CONFIG_VIDEO_OUTPUT_CONTROL is not set 75.732 -# CONFIG_FB is not set 75.733 -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set 75.734 - 75.735 -# 75.736 -# Display device support 75.737 -# 75.738 -# CONFIG_DISPLAY_SUPPORT is not set 75.739 - 75.740 -# 75.741 -# Console display driver support 75.742 -# 75.743 -CONFIG_VGA_CONSOLE=y 75.744 -# CONFIG_VGACON_SOFT_SCROLLBACK is not set 75.745 -# CONFIG_MDA_CONSOLE is not set 75.746 -CONFIG_DUMMY_CONSOLE=y 75.747 -# CONFIG_SOUND is not set 75.748 -# CONFIG_HID_SUPPORT is not set 75.749 -# CONFIG_USB_SUPPORT is not set 75.750 -# CONFIG_MMC is not set 75.751 -# CONFIG_MEMSTICK is not set 75.752 -# CONFIG_NEW_LEDS is not set 75.753 -# CONFIG_ACCESSIBILITY is not set 75.754 -# CONFIG_EDAC is not set 75.755 -# CONFIG_RTC_CLASS is not set 75.756 -# CONFIG_DMADEVICES is not set 75.757 -# CONFIG_AUXDISPLAY is not set 75.758 -# CONFIG_UIO is not set 75.759 -# CONFIG_STAGING is not set 75.760 -# CONFIG_X86_PLATFORM_DEVICES is not set 75.761 - 75.762 -# 75.763 -# Firmware Drivers 75.764 -# 75.765 -# CONFIG_EDD is not set 75.766 -# CONFIG_FIRMWARE_MEMMAP is not set 75.767 -# CONFIG_DELL_RBU is not set 75.768 -# CONFIG_DCDBAS is not set 75.769 -# CONFIG_ISCSI_IBFT_FIND is not set 75.770 - 75.771 -# 75.772 -# File systems 75.773 -# 75.774 -# CONFIG_EXT2_FS is not set 75.775 -CONFIG_EXT3_FS=y 75.776 -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set 75.777 -# CONFIG_EXT3_FS_XATTR is not set 75.778 -# CONFIG_EXT4_FS is not set 75.779 -CONFIG_JBD=y 75.780 -# CONFIG_REISERFS_FS is not set 75.781 -# CONFIG_JFS_FS is not set 75.782 -# CONFIG_FS_POSIX_ACL is not set 75.783 -# CONFIG_XFS_FS is not set 75.784 -# CONFIG_BTRFS_FS is not set 75.785 -# CONFIG_NILFS2_FS is not set 75.786 -CONFIG_FILE_LOCKING=y 75.787 -# CONFIG_FSNOTIFY is not set 75.788 -# CONFIG_DNOTIFY is not set 75.789 -# CONFIG_INOTIFY_USER is not set 75.790 -# CONFIG_FANOTIFY is not set 75.791 -# CONFIG_QUOTA is not set 75.792 -# CONFIG_QUOTACTL is not set 75.793 -# CONFIG_AUTOFS4_FS is not set 75.794 -# CONFIG_FUSE_FS is not set 75.795 - 75.796 -# 75.797 -# Caches 75.798 -# 75.799 -# CONFIG_FSCACHE is not set 75.800 - 75.801 -# 75.802 -# CD-ROM/DVD Filesystems 75.803 -# 75.804 -# CONFIG_ISO9660_FS is not set 75.805 -# CONFIG_UDF_FS is not set 75.806 - 75.807 -# 75.808 -# DOS/FAT/NT Filesystems 75.809 -# 75.810 -# CONFIG_MSDOS_FS is not set 75.811 -# CONFIG_VFAT_FS is not set 75.812 -# CONFIG_NTFS_FS is not set 75.813 - 75.814 -# 75.815 -# Pseudo filesystems 75.816 -# 75.817 -CONFIG_PROC_FS=y 75.818 -# CONFIG_PROC_KCORE is not set 75.819 -CONFIG_PROC_SYSCTL=y 75.820 -# CONFIG_PROC_PAGE_MONITOR is not set 75.821 -# CONFIG_SYSFS is not set 75.822 -# CONFIG_HUGETLBFS is not set 75.823 -# CONFIG_HUGETLB_PAGE is not set 75.824 -# CONFIG_MISC_FILESYSTEMS is not set 75.825 -# CONFIG_NETWORK_FILESYSTEMS is not set 75.826 - 75.827 -# 75.828 -# Partition Types 75.829 -# 75.830 -# CONFIG_PARTITION_ADVANCED is not set 75.831 -CONFIG_MSDOS_PARTITION=y 75.832 -# CONFIG_NLS is not set 75.833 - 75.834 -# 75.835 -# Kernel hacking 75.836 -# 75.837 -CONFIG_TRACE_IRQFLAGS_SUPPORT=y 75.838 -# CONFIG_PRINTK_TIME is not set 75.839 -# CONFIG_ENABLE_WARN_DEPRECATED is not set 75.840 -# CONFIG_ENABLE_MUST_CHECK is not set 75.841 -CONFIG_FRAME_WARN=1024 75.842 -# CONFIG_MAGIC_SYSRQ is not set 75.843 -# CONFIG_STRIP_ASM_SYMS is not set 75.844 -# CONFIG_UNUSED_SYMBOLS is not set 75.845 -# CONFIG_DEBUG_FS is not set 75.846 -# CONFIG_HEADERS_CHECK is not set 75.847 -# CONFIG_DEBUG_KERNEL is not set 75.848 -# CONFIG_HARDLOCKUP_DETECTOR is not set 75.849 -CONFIG_BKL=y 75.850 -# CONFIG_SPARSE_RCU_POINTER is not set 75.851 -# CONFIG_DEBUG_MEMORY_INIT is not set 75.852 -CONFIG_ARCH_WANT_FRAME_POINTERS=y 75.853 -# CONFIG_FRAME_POINTER is not set 75.854 -# CONFIG_SYSCTL_SYSCALL_CHECK is not set 75.855 -CONFIG_USER_STACKTRACE_SUPPORT=y 75.856 -CONFIG_HAVE_FUNCTION_TRACER=y 75.857 -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y 75.858 -CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y 75.859 -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y 75.860 -CONFIG_HAVE_DYNAMIC_FTRACE=y 75.861 -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y 75.862 -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y 75.863 -CONFIG_HAVE_C_RECORDMCOUNT=y 75.864 -CONFIG_TRACING_SUPPORT=y 75.865 -# CONFIG_FTRACE is not set 75.866 -# CONFIG_DMA_API_DEBUG is not set 75.867 -# CONFIG_ATOMIC64_SELFTEST is not set 75.868 -# CONFIG_SAMPLES is not set 75.869 -CONFIG_HAVE_ARCH_KGDB=y 75.870 -CONFIG_HAVE_ARCH_KMEMCHECK=y 75.871 -# CONFIG_STRICT_DEVMEM is not set 75.872 -# CONFIG_X86_VERBOSE_BOOTUP is not set 75.873 -# CONFIG_EARLY_PRINTK is not set 75.874 -# CONFIG_DOUBLEFAULT is not set 75.875 -# CONFIG_IOMMU_STRESS is not set 75.876 -CONFIG_HAVE_MMIOTRACE_SUPPORT=y 75.877 -CONFIG_IO_DELAY_TYPE_0X80=0 75.878 -CONFIG_IO_DELAY_TYPE_0XED=1 75.879 -CONFIG_IO_DELAY_TYPE_UDELAY=2 75.880 -CONFIG_IO_DELAY_TYPE_NONE=3 75.881 -CONFIG_IO_DELAY_0X80=y 75.882 -# CONFIG_IO_DELAY_0XED is not set 75.883 -# CONFIG_IO_DELAY_UDELAY is not set 75.884 -# CONFIG_IO_DELAY_NONE is not set 75.885 -CONFIG_DEFAULT_IO_DELAY_TYPE=0 75.886 -CONFIG_OPTIMIZE_INLINING=y 75.887 - 75.888 -# 75.889 -# Security options 75.890 -# 75.891 -# CONFIG_KEYS is not set 75.892 -# CONFIG_SECURITY_DMESG_RESTRICT is not set 75.893 -# CONFIG_SECURITYFS is not set 75.894 -CONFIG_DEFAULT_SECURITY_DAC=y 75.895 -CONFIG_DEFAULT_SECURITY="" 75.896 -# CONFIG_CRYPTO is not set 75.897 -CONFIG_HAVE_KVM=y 75.898 -# CONFIG_VIRTUALIZATION is not set 75.899 -# CONFIG_BINARY_PRINTF is not set 75.900 - 75.901 -# 75.902 -# Library routines 75.903 -# 75.904 -CONFIG_BITREVERSE=y 75.905 -CONFIG_GENERIC_FIND_FIRST_BIT=y 75.906 -CONFIG_GENERIC_FIND_NEXT_BIT=y 75.907 -CONFIG_GENERIC_FIND_LAST_BIT=y 75.908 -CONFIG_CRC_CCITT=y 75.909 -# CONFIG_CRC16 is not set 75.910 -# CONFIG_CRC_T10DIF is not set 75.911 -# CONFIG_CRC_ITU_T is not set 75.912 -CONFIG_CRC32=y 75.913 -# CONFIG_CRC7 is not set 75.914 -# CONFIG_LIBCRC32C is not set 75.915 -CONFIG_ZLIB_INFLATE=y 75.916 -CONFIG_ZLIB_DEFLATE=y 75.917 -# CONFIG_XZ_DEC is not set 75.918 -# CONFIG_XZ_DEC_BCJ is not set 75.919 -CONFIG_DECOMPRESS_LZMA=y 75.920 -CONFIG_HAS_IOMEM=y 75.921 -CONFIG_HAS_IOPORT=y 75.922 -CONFIG_HAS_DMA=y 75.923 -CONFIG_NLATTR=y
76.1 --- a/kernel-modular/stuff/linux-2.6.37-slitaz.config-i486-lguest Thu Jul 18 13:24:21 2013 +0000 76.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 76.3 @@ -1,854 +0,0 @@ 76.4 -# 76.5 -# Automatically generated make config: don't edit 76.6 -# Linux/i386 2.6.37 Kernel Configuration 76.7 -# Tue May 3 12:17:51 2011 76.8 -# 76.9 -# CONFIG_64BIT is not set 76.10 -CONFIG_X86_32=y 76.11 -# CONFIG_X86_64 is not set 76.12 -CONFIG_X86=y 76.13 -CONFIG_INSTRUCTION_DECODER=y 76.14 -CONFIG_OUTPUT_FORMAT="elf32-i386" 76.15 -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" 76.16 -CONFIG_GENERIC_CMOS_UPDATE=y 76.17 -CONFIG_CLOCKSOURCE_WATCHDOG=y 76.18 -CONFIG_GENERIC_CLOCKEVENTS=y 76.19 -CONFIG_LOCKDEP_SUPPORT=y 76.20 -CONFIG_STACKTRACE_SUPPORT=y 76.21 -CONFIG_HAVE_LATENCYTOP_SUPPORT=y 76.22 -CONFIG_MMU=y 76.23 -CONFIG_ZONE_DMA=y 76.24 -# CONFIG_NEED_DMA_MAP_STATE is not set 76.25 -CONFIG_NEED_SG_DMA_LENGTH=y 76.26 -CONFIG_GENERIC_ISA_DMA=y 76.27 -CONFIG_GENERIC_IOMAP=y 76.28 -CONFIG_GENERIC_HWEIGHT=y 76.29 -CONFIG_ARCH_MAY_HAVE_PC_FDC=y 76.30 -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set 76.31 -CONFIG_RWSEM_XCHGADD_ALGORITHM=y 76.32 -CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y 76.33 -CONFIG_GENERIC_CALIBRATE_DELAY=y 76.34 -# CONFIG_GENERIC_TIME_VSYSCALL is not set 76.35 -CONFIG_ARCH_HAS_CPU_RELAX=y 76.36 -CONFIG_ARCH_HAS_DEFAULT_IDLE=y 76.37 -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y 76.38 -CONFIG_HAVE_SETUP_PER_CPU_AREA=y 76.39 -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y 76.40 -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y 76.41 -# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set 76.42 -CONFIG_ARCH_HIBERNATION_POSSIBLE=y 76.43 -CONFIG_ARCH_SUSPEND_POSSIBLE=y 76.44 -# CONFIG_ZONE_DMA32 is not set 76.45 -CONFIG_ARCH_POPULATES_NODE_MAP=y 76.46 -# CONFIG_AUDIT_ARCH is not set 76.47 -CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y 76.48 -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y 76.49 -CONFIG_X86_32_LAZY_GS=y 76.50 -CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" 76.51 -CONFIG_KTIME_SCALAR=y 76.52 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" 76.53 -CONFIG_CONSTRUCTORS=y 76.54 -CONFIG_HAVE_IRQ_WORK=y 76.55 -CONFIG_IRQ_WORK=y 76.56 - 76.57 -# 76.58 -# General setup 76.59 -# 76.60 -CONFIG_EXPERIMENTAL=y 76.61 -CONFIG_BROKEN_ON_SMP=y 76.62 -CONFIG_INIT_ENV_ARG_LIMIT=32 76.63 -CONFIG_CROSS_COMPILE="" 76.64 -CONFIG_LOCALVERSION="-slitaz" 76.65 -# CONFIG_LOCALVERSION_AUTO is not set 76.66 -CONFIG_HAVE_KERNEL_GZIP=y 76.67 -CONFIG_HAVE_KERNEL_BZIP2=y 76.68 -CONFIG_HAVE_KERNEL_LZMA=y 76.69 -CONFIG_HAVE_KERNEL_XZ=y 76.70 -CONFIG_HAVE_KERNEL_LZO=y 76.71 -# CONFIG_KERNEL_GZIP is not set 76.72 -# CONFIG_KERNEL_BZIP2 is not set 76.73 -CONFIG_KERNEL_LZMA=y 76.74 -# CONFIG_KERNEL_XZ is not set 76.75 -# CONFIG_KERNEL_LZO is not set 76.76 -# CONFIG_SWAP is not set 76.77 -CONFIG_SYSVIPC=y 76.78 -CONFIG_SYSVIPC_SYSCTL=y 76.79 -# CONFIG_POSIX_MQUEUE is not set 76.80 -# CONFIG_BSD_PROCESS_ACCT is not set 76.81 -# CONFIG_TASKSTATS is not set 76.82 -# CONFIG_AUDIT is not set 76.83 -CONFIG_HAVE_GENERIC_HARDIRQS=y 76.84 - 76.85 -# 76.86 -# IRQ subsystem 76.87 -# 76.88 -CONFIG_GENERIC_HARDIRQS=y 76.89 -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y 76.90 -# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set 76.91 -CONFIG_HAVE_SPARSE_IRQ=y 76.92 -CONFIG_GENERIC_IRQ_PROBE=y 76.93 -# CONFIG_GENERIC_PENDING_IRQ is not set 76.94 -# CONFIG_AUTO_IRQ_AFFINITY is not set 76.95 -# CONFIG_IRQ_PER_CPU is not set 76.96 -# CONFIG_HARDIRQS_SW_RESEND is not set 76.97 -# CONFIG_SPARSE_IRQ is not set 76.98 - 76.99 -# 76.100 -# RCU Subsystem 76.101 -# 76.102 -CONFIG_TINY_RCU=y 76.103 -# CONFIG_PREEMPT_RCU is not set 76.104 -# CONFIG_TREE_RCU_TRACE is not set 76.105 -# CONFIG_IKCONFIG is not set 76.106 -CONFIG_LOG_BUF_SHIFT=12 76.107 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y 76.108 -# CONFIG_NAMESPACES is not set 76.109 -# CONFIG_RELAY is not set 76.110 -CONFIG_BLK_DEV_INITRD=y 76.111 -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" 76.112 -CONFIG_INITRAMFS_ROOT_UID=0 76.113 -CONFIG_INITRAMFS_ROOT_GID=0 76.114 -# CONFIG_RD_GZIP is not set 76.115 -# CONFIG_RD_BZIP2 is not set 76.116 -CONFIG_RD_LZMA=y 76.117 -# CONFIG_RD_LZO is not set 76.118 -CONFIG_INITRAMFS_COMPRESSION_NONE=y 76.119 -# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set 76.120 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y 76.121 -CONFIG_SYSCTL=y 76.122 -CONFIG_ANON_INODES=y 76.123 -CONFIG_EMBEDDED=y 76.124 -# CONFIG_UID16 is not set 76.125 -# CONFIG_SYSCTL_SYSCALL is not set 76.126 -# CONFIG_KALLSYMS is not set 76.127 -# CONFIG_HOTPLUG is not set 76.128 -CONFIG_PRINTK=y 76.129 -# CONFIG_BUG is not set 76.130 -# CONFIG_ELF_CORE is not set 76.131 -CONFIG_PCSPKR_PLATFORM=y 76.132 -# CONFIG_BASE_FULL is not set 76.133 -CONFIG_FUTEX=y 76.134 -# CONFIG_EPOLL is not set 76.135 -# CONFIG_SIGNALFD is not set 76.136 -# CONFIG_TIMERFD is not set 76.137 -# CONFIG_EVENTFD is not set 76.138 -# CONFIG_SHMEM is not set 76.139 -# CONFIG_AIO is not set 76.140 -CONFIG_HAVE_PERF_EVENTS=y 76.141 - 76.142 -# 76.143 -# Kernel Performance Events And Counters 76.144 -# 76.145 -CONFIG_PERF_EVENTS=y 76.146 -# CONFIG_PERF_COUNTERS is not set 76.147 -# CONFIG_VM_EVENT_COUNTERS is not set 76.148 -CONFIG_COMPAT_BRK=y 76.149 -# CONFIG_SLAB is not set 76.150 -# CONFIG_SLUB is not set 76.151 -CONFIG_SLOB=y 76.152 -# CONFIG_PROFILING is not set 76.153 -CONFIG_HAVE_OPROFILE=y 76.154 -# CONFIG_JUMP_LABEL is not set 76.155 -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y 76.156 -CONFIG_HAVE_IOREMAP_PROT=y 76.157 -CONFIG_HAVE_KPROBES=y 76.158 -CONFIG_HAVE_KRETPROBES=y 76.159 -CONFIG_HAVE_OPTPROBES=y 76.160 -CONFIG_HAVE_ARCH_TRACEHOOK=y 76.161 -CONFIG_HAVE_DMA_ATTRS=y 76.162 -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y 76.163 -CONFIG_HAVE_DMA_API_DEBUG=y 76.164 -CONFIG_HAVE_HW_BREAKPOINT=y 76.165 -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y 76.166 -CONFIG_HAVE_USER_RETURN_NOTIFIER=y 76.167 -CONFIG_HAVE_PERF_EVENTS_NMI=y 76.168 -CONFIG_HAVE_ARCH_JUMP_LABEL=y 76.169 - 76.170 -# 76.171 -# GCOV-based kernel profiling 76.172 -# 76.173 -CONFIG_HAVE_GENERIC_DMA_COHERENT=y 76.174 -CONFIG_RT_MUTEXES=y 76.175 -CONFIG_BASE_SMALL=1 76.176 -# CONFIG_MODULES is not set 76.177 -CONFIG_BLOCK=y 76.178 -# CONFIG_LBDAF is not set 76.179 -# CONFIG_BLK_DEV_BSG is not set 76.180 -# CONFIG_BLK_DEV_INTEGRITY is not set 76.181 - 76.182 -# 76.183 -# IO Schedulers 76.184 -# 76.185 -CONFIG_IOSCHED_NOOP=y 76.186 -# CONFIG_IOSCHED_DEADLINE is not set 76.187 -# CONFIG_IOSCHED_CFQ is not set 76.188 -CONFIG_DEFAULT_NOOP=y 76.189 -CONFIG_DEFAULT_IOSCHED="noop" 76.190 -# CONFIG_INLINE_SPIN_TRYLOCK is not set 76.191 -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set 76.192 -# CONFIG_INLINE_SPIN_LOCK is not set 76.193 -# CONFIG_INLINE_SPIN_LOCK_BH is not set 76.194 -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set 76.195 -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set 76.196 -CONFIG_INLINE_SPIN_UNLOCK=y 76.197 -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set 76.198 -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y 76.199 -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set 76.200 -# CONFIG_INLINE_READ_TRYLOCK is not set 76.201 -# CONFIG_INLINE_READ_LOCK is not set 76.202 -# CONFIG_INLINE_READ_LOCK_BH is not set 76.203 -# CONFIG_INLINE_READ_LOCK_IRQ is not set 76.204 -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set 76.205 -CONFIG_INLINE_READ_UNLOCK=y 76.206 -# CONFIG_INLINE_READ_UNLOCK_BH is not set 76.207 -CONFIG_INLINE_READ_UNLOCK_IRQ=y 76.208 -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set 76.209 -# CONFIG_INLINE_WRITE_TRYLOCK is not set 76.210 -# CONFIG_INLINE_WRITE_LOCK is not set 76.211 -# CONFIG_INLINE_WRITE_LOCK_BH is not set 76.212 -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set 76.213 -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set 76.214 -CONFIG_INLINE_WRITE_UNLOCK=y 76.215 -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set 76.216 -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y 76.217 -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set 76.218 -# CONFIG_MUTEX_SPIN_ON_OWNER is not set 76.219 -# CONFIG_FREEZER is not set 76.220 - 76.221 -# 76.222 -# Processor type and features 76.223 -# 76.224 -CONFIG_TICK_ONESHOT=y 76.225 -CONFIG_NO_HZ=y 76.226 -# CONFIG_HIGH_RES_TIMERS is not set 76.227 -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y 76.228 -# CONFIG_SMP is not set 76.229 -# CONFIG_X86_EXTENDED_PLATFORM is not set 76.230 -CONFIG_SCHED_OMIT_FRAME_POINTER=y 76.231 -CONFIG_PARAVIRT_GUEST=y 76.232 -# CONFIG_XEN_PRIVILEGED_GUEST is not set 76.233 -CONFIG_KVM_CLOCK=y 76.234 -CONFIG_KVM_GUEST=y 76.235 -CONFIG_LGUEST_GUEST=y 76.236 -CONFIG_PARAVIRT=y 76.237 -CONFIG_PARAVIRT_CLOCK=y 76.238 -CONFIG_NO_BOOTMEM=y 76.239 -# CONFIG_MEMTEST is not set 76.240 -# CONFIG_M386 is not set 76.241 -# CONFIG_M486 is not set 76.242 -# CONFIG_M586 is not set 76.243 -# CONFIG_M586TSC is not set 76.244 -# CONFIG_M586MMX is not set 76.245 -# CONFIG_M686 is not set 76.246 -# CONFIG_MPENTIUMII is not set 76.247 -CONFIG_MPENTIUMIII=y 76.248 -# CONFIG_MPENTIUMM is not set 76.249 -# CONFIG_MPENTIUM4 is not set 76.250 -# CONFIG_MK6 is not set 76.251 -# CONFIG_MK7 is not set 76.252 -# CONFIG_MK8 is not set 76.253 -# CONFIG_MCRUSOE is not set 76.254 -# CONFIG_MEFFICEON is not set 76.255 -# CONFIG_MWINCHIPC6 is not set 76.256 -# CONFIG_MWINCHIP3D is not set 76.257 -# CONFIG_MGEODEGX1 is not set 76.258 -# CONFIG_MGEODE_LX is not set 76.259 -# CONFIG_MCYRIXIII is not set 76.260 -# CONFIG_MVIAC3_2 is not set 76.261 -# CONFIG_MVIAC7 is not set 76.262 -# CONFIG_MCORE2 is not set 76.263 -# CONFIG_MATOM is not set 76.264 -CONFIG_X86_GENERIC=y 76.265 -CONFIG_X86_CPU=y 76.266 -CONFIG_X86_INTERNODE_CACHE_SHIFT=6 76.267 -CONFIG_X86_CMPXCHG=y 76.268 -CONFIG_X86_L1_CACHE_SHIFT=6 76.269 -CONFIG_X86_XADD=y 76.270 -CONFIG_X86_WP_WORKS_OK=y 76.271 -CONFIG_X86_INVLPG=y 76.272 -CONFIG_X86_BSWAP=y 76.273 -CONFIG_X86_POPAD_OK=y 76.274 -CONFIG_X86_INTEL_USERCOPY=y 76.275 -CONFIG_X86_USE_PPRO_CHECKSUM=y 76.276 -CONFIG_X86_TSC=y 76.277 -CONFIG_X86_CMPXCHG64=y 76.278 -CONFIG_X86_CMOV=y 76.279 -CONFIG_X86_MINIMUM_CPU_FAMILY=5 76.280 -CONFIG_X86_DEBUGCTLMSR=y 76.281 -# CONFIG_PROCESSOR_SELECT is not set 76.282 -CONFIG_CPU_SUP_INTEL=y 76.283 -CONFIG_CPU_SUP_CYRIX_32=y 76.284 -CONFIG_CPU_SUP_AMD=y 76.285 -CONFIG_CPU_SUP_CENTAUR=y 76.286 -CONFIG_CPU_SUP_TRANSMETA_32=y 76.287 -CONFIG_CPU_SUP_UMC_32=y 76.288 -# CONFIG_HPET_TIMER is not set 76.289 -# CONFIG_DMI is not set 76.290 -# CONFIG_IOMMU_HELPER is not set 76.291 -# CONFIG_IOMMU_API is not set 76.292 -CONFIG_NR_CPUS=1 76.293 -# CONFIG_IRQ_TIME_ACCOUNTING is not set 76.294 -CONFIG_PREEMPT_NONE=y 76.295 -# CONFIG_PREEMPT_VOLUNTARY is not set 76.296 -# CONFIG_PREEMPT is not set 76.297 -# CONFIG_X86_UP_APIC is not set 76.298 -# CONFIG_X86_MCE is not set 76.299 -# CONFIG_VM86 is not set 76.300 -# CONFIG_TOSHIBA is not set 76.301 -# CONFIG_I8K is not set 76.302 -# CONFIG_X86_REBOOTFIXUPS is not set 76.303 -# CONFIG_MICROCODE is not set 76.304 -# CONFIG_X86_MSR is not set 76.305 -# CONFIG_X86_CPUID is not set 76.306 -CONFIG_NOHIGHMEM=y 76.307 -# CONFIG_HIGHMEM4G is not set 76.308 -# CONFIG_HIGHMEM64G is not set 76.309 -CONFIG_VMSPLIT_3G=y 76.310 -# CONFIG_VMSPLIT_3G_OPT is not set 76.311 -# CONFIG_VMSPLIT_2G is not set 76.312 -# CONFIG_VMSPLIT_2G_OPT is not set 76.313 -# CONFIG_VMSPLIT_1G is not set 76.314 -CONFIG_PAGE_OFFSET=0xC0000000 76.315 -# CONFIG_X86_PAE is not set 76.316 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set 76.317 -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set 76.318 -CONFIG_ARCH_FLATMEM_ENABLE=y 76.319 -CONFIG_ARCH_SPARSEMEM_ENABLE=y 76.320 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y 76.321 -CONFIG_ILLEGAL_POINTER_VALUE=0 76.322 -CONFIG_SELECT_MEMORY_MODEL=y 76.323 -CONFIG_FLATMEM_MANUAL=y 76.324 -# CONFIG_SPARSEMEM_MANUAL is not set 76.325 -CONFIG_FLATMEM=y 76.326 -CONFIG_FLAT_NODE_MEM_MAP=y 76.327 -CONFIG_SPARSEMEM_STATIC=y 76.328 -CONFIG_HAVE_MEMBLOCK=y 76.329 -CONFIG_PAGEFLAGS_EXTENDED=y 76.330 -CONFIG_SPLIT_PTLOCK_CPUS=4 76.331 -# CONFIG_PHYS_ADDR_T_64BIT is not set 76.332 -CONFIG_ZONE_DMA_FLAG=1 76.333 -CONFIG_BOUNCE=y 76.334 -CONFIG_VIRT_TO_BUS=y 76.335 -# CONFIG_KSM is not set 76.336 -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 76.337 -CONFIG_NEED_PER_CPU_KM=y 76.338 -# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set 76.339 -CONFIG_X86_RESERVE_LOW=64 76.340 -# CONFIG_MATH_EMULATION is not set 76.341 -# CONFIG_MTRR is not set 76.342 -# CONFIG_SECCOMP is not set 76.343 -# CONFIG_CC_STACKPROTECTOR is not set 76.344 -CONFIG_HZ_100=y 76.345 -# CONFIG_HZ_250 is not set 76.346 -# CONFIG_HZ_300 is not set 76.347 -# CONFIG_HZ_1000 is not set 76.348 -CONFIG_HZ=100 76.349 -# CONFIG_SCHED_HRTICK is not set 76.350 -# CONFIG_KEXEC is not set 76.351 -CONFIG_PHYSICAL_START=0x100000 76.352 -# CONFIG_RELOCATABLE is not set 76.353 -CONFIG_PHYSICAL_ALIGN=0x100000 76.354 -# CONFIG_COMPAT_VDSO is not set 76.355 -# CONFIG_CMDLINE_BOOL is not set 76.356 - 76.357 -# 76.358 -# Power management and ACPI options 76.359 -# 76.360 -# CONFIG_PM is not set 76.361 -# CONFIG_SFI is not set 76.362 - 76.363 -# 76.364 -# CPU Frequency scaling 76.365 -# 76.366 -# CONFIG_CPU_FREQ is not set 76.367 -# CONFIG_CPU_IDLE is not set 76.368 - 76.369 -# 76.370 -# Bus options (PCI etc.) 76.371 -# 76.372 -# CONFIG_PCI is not set 76.373 -# CONFIG_ARCH_SUPPORTS_MSI is not set 76.374 -CONFIG_ISA_DMA_API=y 76.375 -# CONFIG_ISA is not set 76.376 -# CONFIG_MCA is not set 76.377 -# CONFIG_SCx200 is not set 76.378 -# CONFIG_OLPC is not set 76.379 -# CONFIG_OLPC_OPENFIRMWARE is not set 76.380 - 76.381 -# 76.382 -# Executable file formats / Emulations 76.383 -# 76.384 -CONFIG_BINFMT_ELF=y 76.385 -CONFIG_HAVE_AOUT=y 76.386 -# CONFIG_BINFMT_AOUT is not set 76.387 -# CONFIG_BINFMT_MISC is not set 76.388 -CONFIG_HAVE_ATOMIC_IOMAP=y 76.389 -CONFIG_HAVE_TEXT_POKE_SMP=y 76.390 -CONFIG_NET=y 76.391 - 76.392 -# 76.393 -# Networking options 76.394 -# 76.395 -CONFIG_PACKET=y 76.396 -CONFIG_UNIX=y 76.397 -# CONFIG_NET_KEY is not set 76.398 -CONFIG_INET=y 76.399 -# CONFIG_IP_MULTICAST is not set 76.400 -# CONFIG_IP_ADVANCED_ROUTER is not set 76.401 -CONFIG_IP_FIB_HASH=y 76.402 -# CONFIG_IP_PNP is not set 76.403 -# CONFIG_NET_IPIP is not set 76.404 -# CONFIG_NET_IPGRE_DEMUX is not set 76.405 -# CONFIG_ARPD is not set 76.406 -# CONFIG_SYN_COOKIES is not set 76.407 -# CONFIG_INET_AH is not set 76.408 -# CONFIG_INET_ESP is not set 76.409 -# CONFIG_INET_IPCOMP is not set 76.410 -# CONFIG_INET_XFRM_TUNNEL is not set 76.411 -# CONFIG_INET_TUNNEL is not set 76.412 -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set 76.413 -# CONFIG_INET_XFRM_MODE_TUNNEL is not set 76.414 -# CONFIG_INET_XFRM_MODE_BEET is not set 76.415 -# CONFIG_INET_LRO is not set 76.416 -# CONFIG_INET_DIAG is not set 76.417 -# CONFIG_TCP_CONG_ADVANCED is not set 76.418 -CONFIG_TCP_CONG_CUBIC=y 76.419 -CONFIG_DEFAULT_TCP_CONG="cubic" 76.420 -# CONFIG_TCP_MD5SIG is not set 76.421 -# CONFIG_IPV6 is not set 76.422 -# CONFIG_NETWORK_SECMARK is not set 76.423 -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set 76.424 -# CONFIG_NETFILTER is not set 76.425 -# CONFIG_IP_DCCP is not set 76.426 -# CONFIG_IP_SCTP is not set 76.427 -# CONFIG_RDS is not set 76.428 -# CONFIG_TIPC is not set 76.429 -# CONFIG_ATM is not set 76.430 -# CONFIG_L2TP is not set 76.431 -# CONFIG_BRIDGE is not set 76.432 -# CONFIG_NET_DSA is not set 76.433 -# CONFIG_VLAN_8021Q is not set 76.434 -# CONFIG_DECNET is not set 76.435 -# CONFIG_LLC2 is not set 76.436 -# CONFIG_IPX is not set 76.437 -# CONFIG_ATALK is not set 76.438 -# CONFIG_X25 is not set 76.439 -# CONFIG_LAPB is not set 76.440 -# CONFIG_ECONET is not set 76.441 -# CONFIG_WAN_ROUTER is not set 76.442 -# CONFIG_PHONET is not set 76.443 -# CONFIG_IEEE802154 is not set 76.444 -# CONFIG_NET_SCHED is not set 76.445 -# CONFIG_DCB is not set 76.446 - 76.447 -# 76.448 -# Network testing 76.449 -# 76.450 -# CONFIG_NET_PKTGEN is not set 76.451 -# CONFIG_HAMRADIO is not set 76.452 -# CONFIG_CAN is not set 76.453 -# CONFIG_IRDA is not set 76.454 -# CONFIG_BT is not set 76.455 -# CONFIG_AF_RXRPC is not set 76.456 -# CONFIG_WIRELESS is not set 76.457 -# CONFIG_WIMAX is not set 76.458 -# CONFIG_RFKILL is not set 76.459 -# CONFIG_NET_9P is not set 76.460 -# CONFIG_CAIF is not set 76.461 -# CONFIG_CEPH_LIB is not set 76.462 - 76.463 -# 76.464 -# Device Drivers 76.465 -# 76.466 - 76.467 -# 76.468 -# Generic Driver Options 76.469 -# 76.470 -CONFIG_STANDALONE=y 76.471 -CONFIG_PREVENT_FIRMWARE_BUILD=y 76.472 -CONFIG_FW_LOADER=y 76.473 -CONFIG_FIRMWARE_IN_KERNEL=y 76.474 -CONFIG_EXTRA_FIRMWARE="" 76.475 -# CONFIG_SYS_HYPERVISOR is not set 76.476 -# CONFIG_CONNECTOR is not set 76.477 -# CONFIG_MTD is not set 76.478 -# CONFIG_PARPORT is not set 76.479 -CONFIG_BLK_DEV=y 76.480 -# CONFIG_BLK_DEV_FD is not set 76.481 -# CONFIG_BLK_DEV_COW_COMMON is not set 76.482 -CONFIG_BLK_DEV_LOOP=y 76.483 -# CONFIG_BLK_DEV_CRYPTOLOOP is not set 76.484 - 76.485 -# 76.486 -# DRBD disabled because PROC_FS, INET or CONNECTOR not selected 76.487 -# 76.488 -# CONFIG_BLK_DEV_NBD is not set 76.489 -# CONFIG_BLK_DEV_RAM is not set 76.490 -# CONFIG_CDROM_PKTCDVD is not set 76.491 -# CONFIG_ATA_OVER_ETH is not set 76.492 -CONFIG_VIRTIO_BLK=y 76.493 -# CONFIG_BLK_DEV_HD is not set 76.494 -# CONFIG_BLK_DEV_RBD is not set 76.495 -# CONFIG_MISC_DEVICES is not set 76.496 -CONFIG_HAVE_IDE=y 76.497 -# CONFIG_IDE is not set 76.498 - 76.499 -# 76.500 -# SCSI device support 76.501 -# 76.502 -CONFIG_SCSI_MOD=y 76.503 -# CONFIG_RAID_ATTRS is not set 76.504 -# CONFIG_SCSI is not set 76.505 -# CONFIG_SCSI_DMA is not set 76.506 -# CONFIG_SCSI_NETLINK is not set 76.507 -# CONFIG_ATA is not set 76.508 -# CONFIG_MD is not set 76.509 -# CONFIG_MACINTOSH_DRIVERS is not set 76.510 -CONFIG_NETDEVICES=y 76.511 -# CONFIG_DUMMY is not set 76.512 -# CONFIG_BONDING is not set 76.513 -# CONFIG_MACVLAN is not set 76.514 -# CONFIG_EQUALIZER is not set 76.515 -# CONFIG_TUN is not set 76.516 -# CONFIG_VETH is not set 76.517 -# CONFIG_MII is not set 76.518 -# CONFIG_PHYLIB is not set 76.519 -# CONFIG_NET_ETHERNET is not set 76.520 -# CONFIG_NETDEV_1000 is not set 76.521 -# CONFIG_NETDEV_10000 is not set 76.522 -# CONFIG_WLAN is not set 76.523 - 76.524 -# 76.525 -# Enable WiMAX (Networking options) to see the WiMAX drivers 76.526 -# 76.527 -# CONFIG_WAN is not set 76.528 - 76.529 -# 76.530 -# CAIF transport drivers 76.531 -# 76.532 -# CONFIG_PPP is not set 76.533 -# CONFIG_SLIP is not set 76.534 -# CONFIG_NETCONSOLE is not set 76.535 -# CONFIG_NETPOLL is not set 76.536 -# CONFIG_NET_POLL_CONTROLLER is not set 76.537 -CONFIG_VIRTIO_NET=y 76.538 -# CONFIG_ISDN is not set 76.539 -# CONFIG_PHONE is not set 76.540 - 76.541 -# 76.542 -# Input device support 76.543 -# 76.544 -CONFIG_INPUT=y 76.545 -# CONFIG_INPUT_FF_MEMLESS is not set 76.546 -# CONFIG_INPUT_POLLDEV is not set 76.547 -# CONFIG_INPUT_SPARSEKMAP is not set 76.548 - 76.549 -# 76.550 -# Userland interfaces 76.551 -# 76.552 -# CONFIG_INPUT_MOUSEDEV is not set 76.553 -# CONFIG_INPUT_JOYDEV is not set 76.554 -# CONFIG_INPUT_EVDEV is not set 76.555 -# CONFIG_INPUT_EVBUG is not set 76.556 - 76.557 -# 76.558 -# Input Device Drivers 76.559 -# 76.560 -CONFIG_INPUT_KEYBOARD=y 76.561 -CONFIG_KEYBOARD_ATKBD=y 76.562 -# CONFIG_KEYBOARD_LKKBD is not set 76.563 -# CONFIG_KEYBOARD_NEWTON is not set 76.564 -# CONFIG_KEYBOARD_OPENCORES is not set 76.565 -# CONFIG_KEYBOARD_STOWAWAY is not set 76.566 -# CONFIG_KEYBOARD_SUNKBD is not set 76.567 -# CONFIG_KEYBOARD_XTKBD is not set 76.568 -# CONFIG_INPUT_MOUSE is not set 76.569 -# CONFIG_INPUT_JOYSTICK is not set 76.570 -# CONFIG_INPUT_TABLET is not set 76.571 -# CONFIG_INPUT_TOUCHSCREEN is not set 76.572 -# CONFIG_INPUT_MISC is not set 76.573 - 76.574 -# 76.575 -# Hardware I/O ports 76.576 -# 76.577 -CONFIG_SERIO=y 76.578 -CONFIG_SERIO_I8042=y 76.579 -# CONFIG_SERIO_SERPORT is not set 76.580 -# CONFIG_SERIO_CT82C710 is not set 76.581 -CONFIG_SERIO_LIBPS2=y 76.582 -# CONFIG_SERIO_RAW is not set 76.583 -# CONFIG_SERIO_ALTERA_PS2 is not set 76.584 -# CONFIG_SERIO_PS2MULT is not set 76.585 -# CONFIG_GAMEPORT is not set 76.586 - 76.587 -# 76.588 -# Character devices 76.589 -# 76.590 -CONFIG_VT=y 76.591 -CONFIG_CONSOLE_TRANSLATIONS=y 76.592 -CONFIG_VT_CONSOLE=y 76.593 -CONFIG_HW_CONSOLE=y 76.594 -# CONFIG_VT_HW_CONSOLE_BINDING is not set 76.595 -# CONFIG_DEVKMEM is not set 76.596 -# CONFIG_SERIAL_NONSTANDARD is not set 76.597 -# CONFIG_N_GSM is not set 76.598 - 76.599 -# 76.600 -# Serial drivers 76.601 -# 76.602 -CONFIG_SERIAL_8250=y 76.603 -# CONFIG_SERIAL_8250_CONSOLE is not set 76.604 -CONFIG_FIX_EARLYCON_MEM=y 76.605 -CONFIG_SERIAL_8250_NR_UARTS=2 76.606 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 76.607 -# CONFIG_SERIAL_8250_EXTENDED is not set 76.608 - 76.609 -# 76.610 -# Non-8250 serial port support 76.611 -# 76.612 -CONFIG_SERIAL_CORE=y 76.613 -# CONFIG_SERIAL_TIMBERDALE is not set 76.614 -# CONFIG_SERIAL_ALTERA_JTAGUART is not set 76.615 -# CONFIG_SERIAL_ALTERA_UART is not set 76.616 -CONFIG_UNIX98_PTYS=y 76.617 -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set 76.618 -# CONFIG_LEGACY_PTYS is not set 76.619 -# CONFIG_TTY_PRINTK is not set 76.620 -CONFIG_HVC_DRIVER=y 76.621 -CONFIG_VIRTIO_CONSOLE=y 76.622 -# CONFIG_IPMI_HANDLER is not set 76.623 -# CONFIG_HW_RANDOM is not set 76.624 -# CONFIG_NVRAM is not set 76.625 -# CONFIG_RTC is not set 76.626 -# CONFIG_GEN_RTC is not set 76.627 -# CONFIG_R3964 is not set 76.628 -# CONFIG_MWAVE is not set 76.629 -# CONFIG_PC8736x_GPIO is not set 76.630 -# CONFIG_NSC_GPIO is not set 76.631 -# CONFIG_CS5535_GPIO is not set 76.632 -# CONFIG_RAW_DRIVER is not set 76.633 -# CONFIG_HANGCHECK_TIMER is not set 76.634 -# CONFIG_TCG_TPM is not set 76.635 -# CONFIG_TELCLOCK is not set 76.636 -# CONFIG_RAMOOPS is not set 76.637 -# CONFIG_I2C is not set 76.638 -# CONFIG_SPI is not set 76.639 - 76.640 -# 76.641 -# PPS support 76.642 -# 76.643 -# CONFIG_PPS is not set 76.644 -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y 76.645 -# CONFIG_GPIOLIB is not set 76.646 -# CONFIG_W1 is not set 76.647 -# CONFIG_POWER_SUPPLY is not set 76.648 -# CONFIG_HWMON is not set 76.649 -# CONFIG_THERMAL is not set 76.650 -# CONFIG_WATCHDOG is not set 76.651 -CONFIG_SSB_POSSIBLE=y 76.652 - 76.653 -# 76.654 -# Sonics Silicon Backplane 76.655 -# 76.656 -# CONFIG_SSB is not set 76.657 -# CONFIG_MFD_SUPPORT is not set 76.658 -# CONFIG_REGULATOR is not set 76.659 -# CONFIG_MEDIA_SUPPORT is not set 76.660 - 76.661 -# 76.662 -# Graphics support 76.663 -# 76.664 -# CONFIG_DRM is not set 76.665 -# CONFIG_VGASTATE is not set 76.666 -# CONFIG_VIDEO_OUTPUT_CONTROL is not set 76.667 -# CONFIG_FB is not set 76.668 -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set 76.669 - 76.670 -# 76.671 -# Display device support 76.672 -# 76.673 -# CONFIG_DISPLAY_SUPPORT is not set 76.674 - 76.675 -# 76.676 -# Console display driver support 76.677 -# 76.678 -CONFIG_VGA_CONSOLE=y 76.679 -# CONFIG_VGACON_SOFT_SCROLLBACK is not set 76.680 -CONFIG_DUMMY_CONSOLE=y 76.681 -# CONFIG_SOUND is not set 76.682 -# CONFIG_HID_SUPPORT is not set 76.683 -# CONFIG_USB_SUPPORT is not set 76.684 -# CONFIG_MMC is not set 76.685 -# CONFIG_MEMSTICK is not set 76.686 -# CONFIG_NEW_LEDS is not set 76.687 -# CONFIG_ACCESSIBILITY is not set 76.688 -# CONFIG_EDAC is not set 76.689 -# CONFIG_RTC_CLASS is not set 76.690 -# CONFIG_DMADEVICES is not set 76.691 -# CONFIG_AUXDISPLAY is not set 76.692 -# CONFIG_UIO is not set 76.693 -# CONFIG_STAGING is not set 76.694 -# CONFIG_X86_PLATFORM_DEVICES is not set 76.695 - 76.696 -# 76.697 -# Firmware Drivers 76.698 -# 76.699 -# CONFIG_EDD is not set 76.700 -# CONFIG_FIRMWARE_MEMMAP is not set 76.701 -# CONFIG_DELL_RBU is not set 76.702 -# CONFIG_DCDBAS is not set 76.703 -# CONFIG_ISCSI_IBFT_FIND is not set 76.704 - 76.705 -# 76.706 -# File systems 76.707 -# 76.708 -# CONFIG_EXT2_FS is not set 76.709 -CONFIG_EXT3_FS=y 76.710 -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set 76.711 -# CONFIG_EXT3_FS_XATTR is not set 76.712 -# CONFIG_EXT4_FS is not set 76.713 -CONFIG_JBD=y 76.714 -# CONFIG_REISERFS_FS is not set 76.715 -# CONFIG_JFS_FS is not set 76.716 -# CONFIG_FS_POSIX_ACL is not set 76.717 -# CONFIG_XFS_FS is not set 76.718 -# CONFIG_BTRFS_FS is not set 76.719 -# CONFIG_NILFS2_FS is not set 76.720 -CONFIG_FILE_LOCKING=y 76.721 -# CONFIG_FSNOTIFY is not set 76.722 -# CONFIG_DNOTIFY is not set 76.723 -# CONFIG_INOTIFY_USER is not set 76.724 -# CONFIG_FANOTIFY is not set 76.725 -# CONFIG_QUOTA is not set 76.726 -# CONFIG_QUOTACTL is not set 76.727 -# CONFIG_AUTOFS4_FS is not set 76.728 -# CONFIG_FUSE_FS is not set 76.729 - 76.730 -# 76.731 -# Caches 76.732 -# 76.733 -# CONFIG_FSCACHE is not set 76.734 - 76.735 -# 76.736 -# CD-ROM/DVD Filesystems 76.737 -# 76.738 -# CONFIG_ISO9660_FS is not set 76.739 -# CONFIG_UDF_FS is not set 76.740 - 76.741 -# 76.742 -# DOS/FAT/NT Filesystems 76.743 -# 76.744 -# CONFIG_MSDOS_FS is not set 76.745 -# CONFIG_VFAT_FS is not set 76.746 -# CONFIG_NTFS_FS is not set 76.747 - 76.748 -# 76.749 -# Pseudo filesystems 76.750 -# 76.751 -CONFIG_PROC_FS=y 76.752 -# CONFIG_PROC_KCORE is not set 76.753 -CONFIG_PROC_SYSCTL=y 76.754 -# CONFIG_PROC_PAGE_MONITOR is not set 76.755 -# CONFIG_SYSFS is not set 76.756 -# CONFIG_HUGETLBFS is not set 76.757 -# CONFIG_HUGETLB_PAGE is not set 76.758 -# CONFIG_MISC_FILESYSTEMS is not set 76.759 -# CONFIG_NETWORK_FILESYSTEMS is not set 76.760 - 76.761 -# 76.762 -# Partition Types 76.763 -# 76.764 -# CONFIG_PARTITION_ADVANCED is not set 76.765 -CONFIG_MSDOS_PARTITION=y 76.766 -# CONFIG_NLS is not set 76.767 - 76.768 -# 76.769 -# Kernel hacking 76.770 -# 76.771 -CONFIG_TRACE_IRQFLAGS_SUPPORT=y 76.772 -# CONFIG_PRINTK_TIME is not set 76.773 -# CONFIG_ENABLE_WARN_DEPRECATED is not set 76.774 -# CONFIG_ENABLE_MUST_CHECK is not set 76.775 -CONFIG_FRAME_WARN=1024 76.776 -# CONFIG_MAGIC_SYSRQ is not set 76.777 -# CONFIG_STRIP_ASM_SYMS is not set 76.778 -# CONFIG_UNUSED_SYMBOLS is not set 76.779 -# CONFIG_DEBUG_FS is not set 76.780 -# CONFIG_HEADERS_CHECK is not set 76.781 -# CONFIG_DEBUG_KERNEL is not set 76.782 -# CONFIG_HARDLOCKUP_DETECTOR is not set 76.783 -CONFIG_BKL=y 76.784 -# CONFIG_SPARSE_RCU_POINTER is not set 76.785 -# CONFIG_DEBUG_MEMORY_INIT is not set 76.786 -CONFIG_ARCH_WANT_FRAME_POINTERS=y 76.787 -# CONFIG_FRAME_POINTER is not set 76.788 -# CONFIG_SYSCTL_SYSCALL_CHECK is not set 76.789 -CONFIG_USER_STACKTRACE_SUPPORT=y 76.790 -CONFIG_HAVE_FUNCTION_TRACER=y 76.791 -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y 76.792 -CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y 76.793 -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y 76.794 -CONFIG_HAVE_DYNAMIC_FTRACE=y 76.795 -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y 76.796 -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y 76.797 -CONFIG_HAVE_C_RECORDMCOUNT=y 76.798 -CONFIG_TRACING_SUPPORT=y 76.799 -# CONFIG_FTRACE is not set 76.800 -# CONFIG_DMA_API_DEBUG is not set 76.801 -# CONFIG_ATOMIC64_SELFTEST is not set 76.802 -# CONFIG_SAMPLES is not set 76.803 -CONFIG_HAVE_ARCH_KGDB=y 76.804 -CONFIG_HAVE_ARCH_KMEMCHECK=y 76.805 -# CONFIG_STRICT_DEVMEM is not set 76.806 -# CONFIG_X86_VERBOSE_BOOTUP is not set 76.807 -# CONFIG_EARLY_PRINTK is not set 76.808 -# CONFIG_DOUBLEFAULT is not set 76.809 -# CONFIG_IOMMU_STRESS is not set 76.810 -CONFIG_HAVE_MMIOTRACE_SUPPORT=y 76.811 -CONFIG_IO_DELAY_TYPE_0X80=0 76.812 -CONFIG_IO_DELAY_TYPE_0XED=1 76.813 -CONFIG_IO_DELAY_TYPE_UDELAY=2 76.814 -CONFIG_IO_DELAY_TYPE_NONE=3 76.815 -CONFIG_IO_DELAY_0X80=y 76.816 -# CONFIG_IO_DELAY_0XED is not set 76.817 -# CONFIG_IO_DELAY_UDELAY is not set 76.818 -# CONFIG_IO_DELAY_NONE is not set 76.819 -CONFIG_DEFAULT_IO_DELAY_TYPE=0 76.820 -CONFIG_OPTIMIZE_INLINING=y 76.821 - 76.822 -# 76.823 -# Security options 76.824 -# 76.825 -# CONFIG_KEYS is not set 76.826 -# CONFIG_SECURITY_DMESG_RESTRICT is not set 76.827 -# CONFIG_SECURITYFS is not set 76.828 -CONFIG_DEFAULT_SECURITY_DAC=y 76.829 -CONFIG_DEFAULT_SECURITY="" 76.830 -# CONFIG_CRYPTO is not set 76.831 -CONFIG_HAVE_KVM=y 76.832 -# CONFIG_VIRTUALIZATION is not set 76.833 -CONFIG_VIRTIO=y 76.834 -CONFIG_VIRTIO_RING=y 76.835 -# CONFIG_BINARY_PRINTF is not set 76.836 - 76.837 -# 76.838 -# Library routines 76.839 -# 76.840 -CONFIG_BITREVERSE=y 76.841 -CONFIG_GENERIC_FIND_FIRST_BIT=y 76.842 -CONFIG_GENERIC_FIND_NEXT_BIT=y 76.843 -CONFIG_GENERIC_FIND_LAST_BIT=y 76.844 -CONFIG_CRC_CCITT=y 76.845 -# CONFIG_CRC16 is not set 76.846 -# CONFIG_CRC_T10DIF is not set 76.847 -# CONFIG_CRC_ITU_T is not set 76.848 -CONFIG_CRC32=y 76.849 -# CONFIG_CRC7 is not set 76.850 -# CONFIG_LIBCRC32C is not set 76.851 -# CONFIG_XZ_DEC is not set 76.852 -# CONFIG_XZ_DEC_BCJ is not set 76.853 -CONFIG_DECOMPRESS_LZMA=y 76.854 -CONFIG_HAS_IOMEM=y 76.855 -CONFIG_HAS_IOPORT=y 76.856 -CONFIG_HAS_DMA=y 76.857 -CONFIG_NLATTR=y
77.1 --- a/kernel-modular/stuff/linux-2.6.37-slitaz.config-i486-modular Thu Jul 18 13:24:21 2013 +0000 77.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 77.3 @@ -1,4735 +0,0 @@ 77.4 -# 77.5 -# Automatically generated make config: don't edit 77.6 -# Linux/i386 2.6.37 Kernel Configuration 77.7 -# Fri Feb 4 17:57:18 2011 77.8 -# 77.9 -# CONFIG_64BIT is not set 77.10 -CONFIG_X86_32=y 77.11 -# CONFIG_X86_64 is not set 77.12 -CONFIG_X86=y 77.13 -CONFIG_INSTRUCTION_DECODER=y 77.14 -CONFIG_OUTPUT_FORMAT="elf32-i386" 77.15 -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" 77.16 -CONFIG_GENERIC_CMOS_UPDATE=y 77.17 -CONFIG_CLOCKSOURCE_WATCHDOG=y 77.18 -CONFIG_GENERIC_CLOCKEVENTS=y 77.19 -CONFIG_LOCKDEP_SUPPORT=y 77.20 -CONFIG_STACKTRACE_SUPPORT=y 77.21 -CONFIG_HAVE_LATENCYTOP_SUPPORT=y 77.22 -CONFIG_MMU=y 77.23 -CONFIG_ZONE_DMA=y 77.24 -# CONFIG_NEED_DMA_MAP_STATE is not set 77.25 -CONFIG_NEED_SG_DMA_LENGTH=y 77.26 -CONFIG_GENERIC_ISA_DMA=y 77.27 -CONFIG_GENERIC_IOMAP=y 77.28 -CONFIG_GENERIC_HWEIGHT=y 77.29 -CONFIG_GENERIC_GPIO=y 77.30 -CONFIG_ARCH_MAY_HAVE_PC_FDC=y 77.31 -CONFIG_RWSEM_GENERIC_SPINLOCK=y 77.32 -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set 77.33 -CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y 77.34 -CONFIG_GENERIC_CALIBRATE_DELAY=y 77.35 -# CONFIG_GENERIC_TIME_VSYSCALL is not set 77.36 -CONFIG_ARCH_HAS_CPU_RELAX=y 77.37 -CONFIG_ARCH_HAS_DEFAULT_IDLE=y 77.38 -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y 77.39 -CONFIG_HAVE_SETUP_PER_CPU_AREA=y 77.40 -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y 77.41 -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y 77.42 -# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set 77.43 -CONFIG_ARCH_HIBERNATION_POSSIBLE=y 77.44 -CONFIG_ARCH_SUSPEND_POSSIBLE=y 77.45 -# CONFIG_ZONE_DMA32 is not set 77.46 -CONFIG_ARCH_POPULATES_NODE_MAP=y 77.47 -# CONFIG_AUDIT_ARCH is not set 77.48 -CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y 77.49 -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y 77.50 -CONFIG_X86_32_LAZY_GS=y 77.51 -CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx" 77.52 -CONFIG_KTIME_SCALAR=y 77.53 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" 77.54 -CONFIG_CONSTRUCTORS=y 77.55 -CONFIG_HAVE_IRQ_WORK=y 77.56 -CONFIG_IRQ_WORK=y 77.57 - 77.58 -# 77.59 -# General setup 77.60 -# 77.61 -CONFIG_EXPERIMENTAL=y 77.62 -CONFIG_BROKEN_ON_SMP=y 77.63 -CONFIG_INIT_ENV_ARG_LIMIT=32 77.64 -CONFIG_CROSS_COMPILE="" 77.65 -CONFIG_LOCALVERSION="-slitaz" 77.66 -# CONFIG_LOCALVERSION_AUTO is not set 77.67 -CONFIG_HAVE_KERNEL_GZIP=y 77.68 -CONFIG_HAVE_KERNEL_BZIP2=y 77.69 -CONFIG_HAVE_KERNEL_LZMA=y 77.70 -CONFIG_HAVE_KERNEL_XZ=y 77.71 -CONFIG_HAVE_KERNEL_LZO=y 77.72 -# CONFIG_KERNEL_GZIP is not set 77.73 -# CONFIG_KERNEL_BZIP2 is not set 77.74 -CONFIG_KERNEL_LZMA=y 77.75 -# CONFIG_KERNEL_XZ is not set 77.76 -# CONFIG_KERNEL_LZO is not set 77.77 -# CONFIG_SWAP is not set 77.78 -CONFIG_SYSVIPC=y 77.79 -CONFIG_SYSVIPC_SYSCTL=y 77.80 -# CONFIG_POSIX_MQUEUE is not set 77.81 -# CONFIG_BSD_PROCESS_ACCT is not set 77.82 -# CONFIG_TASKSTATS is not set 77.83 -# CONFIG_AUDIT is not set 77.84 -CONFIG_HAVE_GENERIC_HARDIRQS=y 77.85 - 77.86 -# 77.87 -# IRQ subsystem 77.88 -# 77.89 -CONFIG_GENERIC_HARDIRQS=y 77.90 -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y 77.91 -# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set 77.92 -CONFIG_HAVE_SPARSE_IRQ=y 77.93 -CONFIG_GENERIC_IRQ_PROBE=y 77.94 -# CONFIG_GENERIC_PENDING_IRQ is not set 77.95 -# CONFIG_AUTO_IRQ_AFFINITY is not set 77.96 -# CONFIG_IRQ_PER_CPU is not set 77.97 -# CONFIG_HARDIRQS_SW_RESEND is not set 77.98 -# CONFIG_SPARSE_IRQ is not set 77.99 - 77.100 -# 77.101 -# RCU Subsystem 77.102 -# 77.103 -CONFIG_TINY_RCU=y 77.104 -# CONFIG_PREEMPT_RCU is not set 77.105 -# CONFIG_TREE_RCU_TRACE is not set 77.106 -# CONFIG_IKCONFIG is not set 77.107 -CONFIG_LOG_BUF_SHIFT=12 77.108 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y 77.109 -# CONFIG_CGROUPS is not set 77.110 -# CONFIG_NAMESPACES is not set 77.111 -# CONFIG_SYSFS_DEPRECATED is not set 77.112 -# CONFIG_RELAY is not set 77.113 -CONFIG_BLK_DEV_INITRD=y 77.114 -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" 77.115 -CONFIG_INITRAMFS_ROOT_UID=0 77.116 -CONFIG_INITRAMFS_ROOT_GID=0 77.117 -# CONFIG_RD_GZIP is not set 77.118 -# CONFIG_RD_BZIP2 is not set 77.119 -CONFIG_RD_LZMA=y 77.120 -# CONFIG_RD_LZO is not set 77.121 -CONFIG_INITRAMFS_COMPRESSION_NONE=y 77.122 -# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set 77.123 -# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set 77.124 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y 77.125 -CONFIG_SYSCTL=y 77.126 -CONFIG_ANON_INODES=y 77.127 -CONFIG_EMBEDDED=y 77.128 -# CONFIG_UID16 is not set 77.129 -# CONFIG_SYSCTL_SYSCALL is not set 77.130 -# CONFIG_KALLSYMS is not set 77.131 -# CONFIG_HOTPLUG is not set 77.132 -CONFIG_PRINTK=y 77.133 -# CONFIG_BUG is not set 77.134 -# CONFIG_ELF_CORE is not set 77.135 -CONFIG_PCSPKR_PLATFORM=y 77.136 -# CONFIG_BASE_FULL is not set 77.137 -CONFIG_FUTEX=y 77.138 -# CONFIG_EPOLL is not set 77.139 -# CONFIG_SIGNALFD is not set 77.140 -# CONFIG_TIMERFD is not set 77.141 -CONFIG_EVENTFD=y 77.142 -# CONFIG_SHMEM is not set 77.143 -# CONFIG_AIO is not set 77.144 -CONFIG_HAVE_PERF_EVENTS=y 77.145 - 77.146 -# 77.147 -# Kernel Performance Events And Counters 77.148 -# 77.149 -CONFIG_PERF_EVENTS=y 77.150 -# CONFIG_PERF_COUNTERS is not set 77.151 -# CONFIG_VM_EVENT_COUNTERS is not set 77.152 -CONFIG_PCI_QUIRKS=y 77.153 -CONFIG_COMPAT_BRK=y 77.154 -# CONFIG_SLAB is not set 77.155 -# CONFIG_SLUB is not set 77.156 -CONFIG_SLOB=y 77.157 -# CONFIG_PROFILING is not set 77.158 -CONFIG_HAVE_OPROFILE=y 77.159 -# CONFIG_KPROBES is not set 77.160 -# CONFIG_JUMP_LABEL is not set 77.161 -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y 77.162 -CONFIG_USER_RETURN_NOTIFIER=y 77.163 -CONFIG_HAVE_IOREMAP_PROT=y 77.164 -CONFIG_HAVE_KPROBES=y 77.165 -CONFIG_HAVE_KRETPROBES=y 77.166 -CONFIG_HAVE_OPTPROBES=y 77.167 -CONFIG_HAVE_ARCH_TRACEHOOK=y 77.168 -CONFIG_HAVE_DMA_ATTRS=y 77.169 -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y 77.170 -CONFIG_HAVE_DMA_API_DEBUG=y 77.171 -CONFIG_HAVE_HW_BREAKPOINT=y 77.172 -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y 77.173 -CONFIG_HAVE_USER_RETURN_NOTIFIER=y 77.174 -CONFIG_HAVE_PERF_EVENTS_NMI=y 77.175 -CONFIG_HAVE_ARCH_JUMP_LABEL=y 77.176 - 77.177 -# 77.178 -# GCOV-based kernel profiling 77.179 -# 77.180 -CONFIG_HAVE_GENERIC_DMA_COHERENT=y 77.181 -CONFIG_RT_MUTEXES=y 77.182 -CONFIG_BASE_SMALL=1 77.183 -CONFIG_MODULES=y 77.184 -# CONFIG_MODULE_FORCE_LOAD is not set 77.185 -CONFIG_MODULE_UNLOAD=y 77.186 -# CONFIG_MODULE_FORCE_UNLOAD is not set 77.187 -# CONFIG_MODVERSIONS is not set 77.188 -# CONFIG_MODULE_SRCVERSION_ALL is not set 77.189 -CONFIG_BLOCK=y 77.190 -# CONFIG_LBDAF is not set 77.191 -CONFIG_BLK_DEV_BSG=y 77.192 -# CONFIG_BLK_DEV_INTEGRITY is not set 77.193 - 77.194 -# 77.195 -# IO Schedulers 77.196 -# 77.197 -CONFIG_IOSCHED_NOOP=y 77.198 -# CONFIG_IOSCHED_DEADLINE is not set 77.199 -# CONFIG_IOSCHED_CFQ is not set 77.200 -CONFIG_DEFAULT_NOOP=y 77.201 -CONFIG_DEFAULT_IOSCHED="noop" 77.202 -CONFIG_PREEMPT_NOTIFIERS=y 77.203 -# CONFIG_INLINE_SPIN_TRYLOCK is not set 77.204 -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set 77.205 -# CONFIG_INLINE_SPIN_LOCK is not set 77.206 -# CONFIG_INLINE_SPIN_LOCK_BH is not set 77.207 -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set 77.208 -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set 77.209 -CONFIG_INLINE_SPIN_UNLOCK=y 77.210 -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set 77.211 -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y 77.212 -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set 77.213 -# CONFIG_INLINE_READ_TRYLOCK is not set 77.214 -# CONFIG_INLINE_READ_LOCK is not set 77.215 -# CONFIG_INLINE_READ_LOCK_BH is not set 77.216 -# CONFIG_INLINE_READ_LOCK_IRQ is not set 77.217 -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set 77.218 -CONFIG_INLINE_READ_UNLOCK=y 77.219 -# CONFIG_INLINE_READ_UNLOCK_BH is not set 77.220 -CONFIG_INLINE_READ_UNLOCK_IRQ=y 77.221 -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set 77.222 -# CONFIG_INLINE_WRITE_TRYLOCK is not set 77.223 -# CONFIG_INLINE_WRITE_LOCK is not set 77.224 -# CONFIG_INLINE_WRITE_LOCK_BH is not set 77.225 -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set 77.226 -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set 77.227 -CONFIG_INLINE_WRITE_UNLOCK=y 77.228 -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set 77.229 -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y 77.230 -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set 77.231 -# CONFIG_MUTEX_SPIN_ON_OWNER is not set 77.232 -# CONFIG_FREEZER is not set 77.233 - 77.234 -# 77.235 -# Processor type and features 77.236 -# 77.237 -# CONFIG_NO_HZ is not set 77.238 -# CONFIG_HIGH_RES_TIMERS is not set 77.239 -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y 77.240 -# CONFIG_SMP is not set 77.241 -# CONFIG_X86_EXTENDED_PLATFORM is not set 77.242 -CONFIG_SCHED_OMIT_FRAME_POINTER=y 77.243 -# CONFIG_PARAVIRT_GUEST is not set 77.244 -CONFIG_NO_BOOTMEM=y 77.245 -# CONFIG_MEMTEST is not set 77.246 -CONFIG_M386=y 77.247 -# CONFIG_M486 is not set 77.248 -# CONFIG_M586 is not set 77.249 -# CONFIG_M586TSC is not set 77.250 -# CONFIG_M586MMX is not set 77.251 -# CONFIG_M686 is not set 77.252 -# CONFIG_MPENTIUMII is not set 77.253 -# CONFIG_MPENTIUMIII is not set 77.254 -# CONFIG_MPENTIUMM is not set 77.255 -# CONFIG_MPENTIUM4 is not set 77.256 -# CONFIG_MK6 is not set 77.257 -# CONFIG_MK7 is not set 77.258 -# CONFIG_MK8 is not set 77.259 -# CONFIG_MCRUSOE is not set 77.260 -# CONFIG_MEFFICEON is not set 77.261 -# CONFIG_MWINCHIPC6 is not set 77.262 -# CONFIG_MWINCHIP3D is not set 77.263 -# CONFIG_MGEODEGX1 is not set 77.264 -# CONFIG_MGEODE_LX is not set 77.265 -# CONFIG_MCYRIXIII is not set 77.266 -# CONFIG_MVIAC3_2 is not set 77.267 -# CONFIG_MVIAC7 is not set 77.268 -# CONFIG_MCORE2 is not set 77.269 -# CONFIG_MATOM is not set 77.270 -# CONFIG_X86_GENERIC is not set 77.271 -CONFIG_X86_CPU=y 77.272 -CONFIG_X86_INTERNODE_CACHE_SHIFT=4 77.273 -# CONFIG_X86_CMPXCHG is not set 77.274 -CONFIG_X86_L1_CACHE_SHIFT=4 77.275 -# CONFIG_X86_PPRO_FENCE is not set 77.276 -CONFIG_X86_F00F_BUG=y 77.277 -CONFIG_X86_INVD_BUG=y 77.278 -CONFIG_X86_MINIMUM_CPU_FAMILY=3 77.279 -# CONFIG_PROCESSOR_SELECT is not set 77.280 -CONFIG_CPU_SUP_INTEL=y 77.281 -CONFIG_CPU_SUP_CYRIX_32=y 77.282 -CONFIG_CPU_SUP_AMD=y 77.283 -CONFIG_CPU_SUP_CENTAUR=y 77.284 -CONFIG_CPU_SUP_TRANSMETA_32=y 77.285 -CONFIG_CPU_SUP_UMC_32=y 77.286 -# CONFIG_HPET_TIMER is not set 77.287 -# CONFIG_DMI is not set 77.288 -# CONFIG_IOMMU_HELPER is not set 77.289 -# CONFIG_IOMMU_API is not set 77.290 -CONFIG_NR_CPUS=1 77.291 -# CONFIG_IRQ_TIME_ACCOUNTING is not set 77.292 -CONFIG_PREEMPT_NONE=y 77.293 -# CONFIG_PREEMPT_VOLUNTARY is not set 77.294 -# CONFIG_PREEMPT is not set 77.295 -# CONFIG_X86_UP_APIC is not set 77.296 -# CONFIG_X86_MCE is not set 77.297 -# CONFIG_VM86 is not set 77.298 -# CONFIG_TOSHIBA is not set 77.299 -# CONFIG_I8K is not set 77.300 -# CONFIG_X86_REBOOTFIXUPS is not set 77.301 -# CONFIG_MICROCODE is not set 77.302 -# CONFIG_X86_MSR is not set 77.303 -# CONFIG_X86_CPUID is not set 77.304 -CONFIG_NOHIGHMEM=y 77.305 -# CONFIG_HIGHMEM4G is not set 77.306 -CONFIG_VMSPLIT_3G=y 77.307 -# CONFIG_VMSPLIT_3G_OPT is not set 77.308 -# CONFIG_VMSPLIT_2G is not set 77.309 -# CONFIG_VMSPLIT_2G_OPT is not set 77.310 -# CONFIG_VMSPLIT_1G is not set 77.311 -CONFIG_PAGE_OFFSET=0xC0000000 77.312 -# CONFIG_X86_PAE is not set 77.313 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set 77.314 -# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set 77.315 -CONFIG_ARCH_FLATMEM_ENABLE=y 77.316 -CONFIG_ARCH_SPARSEMEM_ENABLE=y 77.317 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y 77.318 -CONFIG_ILLEGAL_POINTER_VALUE=0 77.319 -CONFIG_SELECT_MEMORY_MODEL=y 77.320 -CONFIG_FLATMEM_MANUAL=y 77.321 -# CONFIG_SPARSEMEM_MANUAL is not set 77.322 -CONFIG_FLATMEM=y 77.323 -CONFIG_FLAT_NODE_MEM_MAP=y 77.324 -CONFIG_SPARSEMEM_STATIC=y 77.325 -CONFIG_HAVE_MEMBLOCK=y 77.326 -CONFIG_PAGEFLAGS_EXTENDED=y 77.327 -CONFIG_SPLIT_PTLOCK_CPUS=4 77.328 -# CONFIG_PHYS_ADDR_T_64BIT is not set 77.329 -CONFIG_ZONE_DMA_FLAG=1 77.330 -CONFIG_BOUNCE=y 77.331 -CONFIG_VIRT_TO_BUS=y 77.332 -CONFIG_MMU_NOTIFIER=y 77.333 -# CONFIG_KSM is not set 77.334 -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 77.335 -CONFIG_NEED_PER_CPU_KM=y 77.336 -# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set 77.337 -CONFIG_X86_RESERVE_LOW=64 77.338 -CONFIG_MATH_EMULATION=y 77.339 -# CONFIG_MTRR is not set 77.340 -# CONFIG_SECCOMP is not set 77.341 -# CONFIG_CC_STACKPROTECTOR is not set 77.342 -CONFIG_HZ_100=y 77.343 -# CONFIG_HZ_250 is not set 77.344 -# CONFIG_HZ_300 is not set 77.345 -# CONFIG_HZ_1000 is not set 77.346 -CONFIG_HZ=100 77.347 -# CONFIG_SCHED_HRTICK is not set 77.348 -# CONFIG_KEXEC is not set 77.349 -CONFIG_PHYSICAL_START=0x100000 77.350 -# CONFIG_RELOCATABLE is not set 77.351 -CONFIG_PHYSICAL_ALIGN=0x100000 77.352 -# CONFIG_COMPAT_VDSO is not set 77.353 -# CONFIG_CMDLINE_BOOL is not set 77.354 - 77.355 -# 77.356 -# Power management and ACPI options 77.357 -# 77.358 -# CONFIG_PM is not set 77.359 -# CONFIG_SFI is not set 77.360 - 77.361 -# 77.362 -# CPU Frequency scaling 77.363 -# 77.364 -# CONFIG_CPU_FREQ is not set 77.365 -# CONFIG_CPU_IDLE is not set 77.366 - 77.367 -# 77.368 -# Bus options (PCI etc.) 77.369 -# 77.370 -CONFIG_PCI=y 77.371 -# CONFIG_PCI_GOBIOS is not set 77.372 -# CONFIG_PCI_GOMMCONFIG is not set 77.373 -# CONFIG_PCI_GODIRECT is not set 77.374 -CONFIG_PCI_GOANY=y 77.375 -CONFIG_PCI_BIOS=y 77.376 -CONFIG_PCI_DIRECT=y 77.377 -CONFIG_PCI_DOMAINS=y 77.378 -# CONFIG_PCI_CNB20LE_QUIRK is not set 77.379 -# CONFIG_PCIEPORTBUS is not set 77.380 -# CONFIG_ARCH_SUPPORTS_MSI is not set 77.381 -# CONFIG_PCI_STUB is not set 77.382 -# CONFIG_PCI_IOV is not set 77.383 -CONFIG_ISA_DMA_API=y 77.384 -CONFIG_ISA=y 77.385 -# CONFIG_EISA is not set 77.386 -# CONFIG_MCA is not set 77.387 -# CONFIG_SCx200 is not set 77.388 -# CONFIG_OLPC is not set 77.389 -# CONFIG_OLPC_OPENFIRMWARE is not set 77.390 -CONFIG_AMD_NB=y 77.391 - 77.392 -# 77.393 -# Executable file formats / Emulations 77.394 -# 77.395 -CONFIG_BINFMT_ELF=y 77.396 -CONFIG_HAVE_AOUT=y 77.397 -CONFIG_BINFMT_AOUT=m 77.398 -CONFIG_BINFMT_MISC=m 77.399 -CONFIG_HAVE_ATOMIC_IOMAP=y 77.400 -CONFIG_HAVE_TEXT_POKE_SMP=y 77.401 -CONFIG_NET=y 77.402 - 77.403 -# 77.404 -# Networking options 77.405 -# 77.406 -CONFIG_PACKET=y 77.407 -CONFIG_UNIX=y 77.408 -CONFIG_XFRM=y 77.409 -# CONFIG_XFRM_USER is not set 77.410 -# CONFIG_XFRM_SUB_POLICY is not set 77.411 -# CONFIG_XFRM_MIGRATE is not set 77.412 -# CONFIG_XFRM_STATISTICS is not set 77.413 -CONFIG_XFRM_IPCOMP=m 77.414 -# CONFIG_NET_KEY is not set 77.415 -CONFIG_INET=y 77.416 -# CONFIG_IP_MULTICAST is not set 77.417 -# CONFIG_IP_ADVANCED_ROUTER is not set 77.418 -CONFIG_IP_FIB_HASH=y 77.419 -# CONFIG_IP_PNP is not set 77.420 -CONFIG_NET_IPIP=m 77.421 -# CONFIG_NET_IPGRE_DEMUX is not set 77.422 -# CONFIG_ARPD is not set 77.423 -# CONFIG_SYN_COOKIES is not set 77.424 -CONFIG_INET_AH=m 77.425 -CONFIG_INET_ESP=m 77.426 -CONFIG_INET_IPCOMP=m 77.427 -CONFIG_INET_XFRM_TUNNEL=m 77.428 -CONFIG_INET_TUNNEL=m 77.429 -CONFIG_INET_XFRM_MODE_TRANSPORT=m 77.430 -CONFIG_INET_XFRM_MODE_TUNNEL=m 77.431 -CONFIG_INET_XFRM_MODE_BEET=m 77.432 -CONFIG_INET_LRO=y 77.433 -# CONFIG_INET_DIAG is not set 77.434 -# CONFIG_TCP_CONG_ADVANCED is not set 77.435 -CONFIG_TCP_CONG_CUBIC=y 77.436 -CONFIG_DEFAULT_TCP_CONG="cubic" 77.437 -# CONFIG_TCP_MD5SIG is not set 77.438 -CONFIG_IPV6=m 77.439 -# CONFIG_IPV6_PRIVACY is not set 77.440 -# CONFIG_IPV6_ROUTER_PREF is not set 77.441 -# CONFIG_IPV6_OPTIMISTIC_DAD is not set 77.442 -CONFIG_INET6_AH=m 77.443 -CONFIG_INET6_ESP=m 77.444 -CONFIG_INET6_IPCOMP=m 77.445 -# CONFIG_IPV6_MIP6 is not set 77.446 -CONFIG_INET6_XFRM_TUNNEL=m 77.447 -CONFIG_INET6_TUNNEL=m 77.448 -CONFIG_INET6_XFRM_MODE_TRANSPORT=m 77.449 -CONFIG_INET6_XFRM_MODE_TUNNEL=m 77.450 -CONFIG_INET6_XFRM_MODE_BEET=m 77.451 -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set 77.452 -CONFIG_IPV6_SIT=m 77.453 -# CONFIG_IPV6_SIT_6RD is not set 77.454 -CONFIG_IPV6_NDISC_NODETYPE=y 77.455 -CONFIG_IPV6_TUNNEL=m 77.456 -# CONFIG_IPV6_MULTIPLE_TABLES is not set 77.457 -# CONFIG_IPV6_MROUTE is not set 77.458 -# CONFIG_NETWORK_SECMARK is not set 77.459 -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set 77.460 -CONFIG_NETFILTER=y 77.461 -# CONFIG_NETFILTER_DEBUG is not set 77.462 -CONFIG_NETFILTER_ADVANCED=y 77.463 -CONFIG_BRIDGE_NETFILTER=y 77.464 - 77.465 -# 77.466 -# Core Netfilter Configuration 77.467 -# 77.468 -CONFIG_NETFILTER_NETLINK=m 77.469 -CONFIG_NETFILTER_NETLINK_QUEUE=m 77.470 -CONFIG_NETFILTER_NETLINK_LOG=m 77.471 -CONFIG_NF_CONNTRACK=m 77.472 -CONFIG_NF_CONNTRACK_MARK=y 77.473 -CONFIG_NF_CONNTRACK_EVENTS=y 77.474 -CONFIG_NF_CT_PROTO_DCCP=m 77.475 -CONFIG_NF_CT_PROTO_GRE=m 77.476 -CONFIG_NF_CT_PROTO_SCTP=m 77.477 -CONFIG_NF_CT_PROTO_UDPLITE=m 77.478 -CONFIG_NF_CONNTRACK_AMANDA=m 77.479 -CONFIG_NF_CONNTRACK_FTP=m 77.480 -CONFIG_NF_CONNTRACK_H323=m 77.481 -CONFIG_NF_CONNTRACK_IRC=m 77.482 -CONFIG_NF_CONNTRACK_NETBIOS_NS=m 77.483 -CONFIG_NF_CONNTRACK_PPTP=m 77.484 -CONFIG_NF_CONNTRACK_SANE=m 77.485 -CONFIG_NF_CONNTRACK_SIP=m 77.486 -CONFIG_NF_CONNTRACK_TFTP=m 77.487 -CONFIG_NF_CT_NETLINK=m 77.488 -# CONFIG_NETFILTER_TPROXY is not set 77.489 -CONFIG_NETFILTER_XTABLES=m 77.490 - 77.491 -# 77.492 -# Xtables combined modules 77.493 -# 77.494 -CONFIG_NETFILTER_XT_MARK=m 77.495 -CONFIG_NETFILTER_XT_CONNMARK=m 77.496 - 77.497 -# 77.498 -# Xtables targets 77.499 -# 77.500 -# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set 77.501 -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m 77.502 -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m 77.503 -# CONFIG_NETFILTER_XT_TARGET_CT is not set 77.504 -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set 77.505 -CONFIG_NETFILTER_XT_TARGET_HL=m 77.506 -# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set 77.507 -# CONFIG_NETFILTER_XT_TARGET_LED is not set 77.508 -CONFIG_NETFILTER_XT_TARGET_MARK=m 77.509 -CONFIG_NETFILTER_XT_TARGET_NFLOG=m 77.510 -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m 77.511 -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set 77.512 -CONFIG_NETFILTER_XT_TARGET_RATEEST=m 77.513 -# CONFIG_NETFILTER_XT_TARGET_TEE is not set 77.514 -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set 77.515 -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m 77.516 -# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set 77.517 - 77.518 -# 77.519 -# Xtables matches 77.520 -# 77.521 -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m 77.522 -CONFIG_NETFILTER_XT_MATCH_COMMENT=m 77.523 -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m 77.524 -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m 77.525 -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m 77.526 -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m 77.527 -# CONFIG_NETFILTER_XT_MATCH_CPU is not set 77.528 -CONFIG_NETFILTER_XT_MATCH_DCCP=m 77.529 -CONFIG_NETFILTER_XT_MATCH_DSCP=m 77.530 -CONFIG_NETFILTER_XT_MATCH_ESP=m 77.531 -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m 77.532 -CONFIG_NETFILTER_XT_MATCH_HELPER=m 77.533 -CONFIG_NETFILTER_XT_MATCH_HL=m 77.534 -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m 77.535 -# CONFIG_NETFILTER_XT_MATCH_IPVS is not set 77.536 -CONFIG_NETFILTER_XT_MATCH_LENGTH=m 77.537 -CONFIG_NETFILTER_XT_MATCH_LIMIT=m 77.538 -CONFIG_NETFILTER_XT_MATCH_MAC=m 77.539 -CONFIG_NETFILTER_XT_MATCH_MARK=m 77.540 -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m 77.541 -CONFIG_NETFILTER_XT_MATCH_OSF=m 77.542 -CONFIG_NETFILTER_XT_MATCH_OWNER=m 77.543 -CONFIG_NETFILTER_XT_MATCH_POLICY=m 77.544 -# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set 77.545 -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m 77.546 -CONFIG_NETFILTER_XT_MATCH_QUOTA=m 77.547 -CONFIG_NETFILTER_XT_MATCH_RATEEST=m 77.548 -CONFIG_NETFILTER_XT_MATCH_REALM=m 77.549 -CONFIG_NETFILTER_XT_MATCH_RECENT=m 77.550 -CONFIG_NETFILTER_XT_MATCH_SCTP=m 77.551 -CONFIG_NETFILTER_XT_MATCH_STATE=m 77.552 -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m 77.553 -CONFIG_NETFILTER_XT_MATCH_STRING=m 77.554 -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m 77.555 -CONFIG_NETFILTER_XT_MATCH_TIME=m 77.556 -CONFIG_NETFILTER_XT_MATCH_U32=m 77.557 -CONFIG_IP_VS=m 77.558 -CONFIG_IP_VS_IPV6=y 77.559 -# CONFIG_IP_VS_DEBUG is not set 77.560 -CONFIG_IP_VS_TAB_BITS=12 77.561 - 77.562 -# 77.563 -# IPVS transport protocol load balancing support 77.564 -# 77.565 -CONFIG_IP_VS_PROTO_TCP=y 77.566 -CONFIG_IP_VS_PROTO_UDP=y 77.567 -CONFIG_IP_VS_PROTO_AH_ESP=y 77.568 -CONFIG_IP_VS_PROTO_ESP=y 77.569 -CONFIG_IP_VS_PROTO_AH=y 77.570 -CONFIG_IP_VS_PROTO_SCTP=y 77.571 - 77.572 -# 77.573 -# IPVS scheduler 77.574 -# 77.575 -CONFIG_IP_VS_RR=m 77.576 -CONFIG_IP_VS_WRR=m 77.577 -CONFIG_IP_VS_LC=m 77.578 -CONFIG_IP_VS_WLC=m 77.579 -CONFIG_IP_VS_LBLC=m 77.580 -CONFIG_IP_VS_LBLCR=m 77.581 -CONFIG_IP_VS_DH=m 77.582 -CONFIG_IP_VS_SH=m 77.583 -CONFIG_IP_VS_SED=m 77.584 -CONFIG_IP_VS_NQ=m 77.585 - 77.586 -# 77.587 -# IPVS application helper 77.588 -# 77.589 -CONFIG_IP_VS_FTP=m 77.590 -CONFIG_IP_VS_NFCT=y 77.591 -# CONFIG_IP_VS_PE_SIP is not set 77.592 - 77.593 -# 77.594 -# IP: Netfilter Configuration 77.595 -# 77.596 -CONFIG_NF_DEFRAG_IPV4=m 77.597 -CONFIG_NF_CONNTRACK_IPV4=m 77.598 -CONFIG_NF_CONNTRACK_PROC_COMPAT=y 77.599 -CONFIG_IP_NF_QUEUE=m 77.600 -CONFIG_IP_NF_IPTABLES=m 77.601 -CONFIG_IP_NF_MATCH_ADDRTYPE=m 77.602 -CONFIG_IP_NF_MATCH_AH=m 77.603 -CONFIG_IP_NF_MATCH_ECN=m 77.604 -CONFIG_IP_NF_MATCH_TTL=m 77.605 -CONFIG_IP_NF_FILTER=m 77.606 -CONFIG_IP_NF_TARGET_REJECT=m 77.607 -CONFIG_IP_NF_TARGET_LOG=m 77.608 -CONFIG_IP_NF_TARGET_ULOG=m 77.609 -CONFIG_NF_NAT=m 77.610 -CONFIG_NF_NAT_NEEDED=y 77.611 -CONFIG_IP_NF_TARGET_MASQUERADE=m 77.612 -CONFIG_IP_NF_TARGET_NETMAP=m 77.613 -CONFIG_IP_NF_TARGET_REDIRECT=m 77.614 -CONFIG_NF_NAT_SNMP_BASIC=m 77.615 -CONFIG_NF_NAT_PROTO_DCCP=m 77.616 -CONFIG_NF_NAT_PROTO_GRE=m 77.617 -CONFIG_NF_NAT_PROTO_UDPLITE=m 77.618 -CONFIG_NF_NAT_PROTO_SCTP=m 77.619 -CONFIG_NF_NAT_FTP=m 77.620 -CONFIG_NF_NAT_IRC=m 77.621 -CONFIG_NF_NAT_TFTP=m 77.622 -CONFIG_NF_NAT_AMANDA=m 77.623 -CONFIG_NF_NAT_PPTP=m 77.624 -CONFIG_NF_NAT_H323=m 77.625 -CONFIG_NF_NAT_SIP=m 77.626 -CONFIG_IP_NF_MANGLE=m 77.627 -CONFIG_IP_NF_TARGET_CLUSTERIP=m 77.628 -CONFIG_IP_NF_TARGET_ECN=m 77.629 -CONFIG_IP_NF_TARGET_TTL=m 77.630 -CONFIG_IP_NF_RAW=m 77.631 -CONFIG_IP_NF_ARPTABLES=m 77.632 -CONFIG_IP_NF_ARPFILTER=m 77.633 -CONFIG_IP_NF_ARP_MANGLE=m 77.634 - 77.635 -# 77.636 -# IPv6: Netfilter Configuration 77.637 -# 77.638 -CONFIG_NF_DEFRAG_IPV6=m 77.639 -CONFIG_NF_CONNTRACK_IPV6=m 77.640 -CONFIG_IP6_NF_QUEUE=m 77.641 -CONFIG_IP6_NF_IPTABLES=m 77.642 -CONFIG_IP6_NF_MATCH_AH=m 77.643 -CONFIG_IP6_NF_MATCH_EUI64=m 77.644 -CONFIG_IP6_NF_MATCH_FRAG=m 77.645 -CONFIG_IP6_NF_MATCH_OPTS=m 77.646 -CONFIG_IP6_NF_MATCH_HL=m 77.647 -CONFIG_IP6_NF_MATCH_IPV6HEADER=m 77.648 -CONFIG_IP6_NF_MATCH_MH=m 77.649 -CONFIG_IP6_NF_MATCH_RT=m 77.650 -CONFIG_IP6_NF_TARGET_HL=m 77.651 -CONFIG_IP6_NF_TARGET_LOG=m 77.652 -CONFIG_IP6_NF_FILTER=m 77.653 -CONFIG_IP6_NF_TARGET_REJECT=m 77.654 -CONFIG_IP6_NF_MANGLE=m 77.655 -CONFIG_IP6_NF_RAW=m 77.656 -# CONFIG_BRIDGE_NF_EBTABLES is not set 77.657 -# CONFIG_IP_DCCP is not set 77.658 -CONFIG_IP_SCTP=m 77.659 -# CONFIG_SCTP_DBG_MSG is not set 77.660 -# CONFIG_SCTP_DBG_OBJCNT is not set 77.661 -# CONFIG_SCTP_HMAC_NONE is not set 77.662 -# CONFIG_SCTP_HMAC_SHA1 is not set 77.663 -CONFIG_SCTP_HMAC_MD5=y 77.664 -# CONFIG_RDS is not set 77.665 -# CONFIG_TIPC is not set 77.666 -# CONFIG_ATM is not set 77.667 -# CONFIG_L2TP is not set 77.668 -CONFIG_STP=m 77.669 -CONFIG_BRIDGE=m 77.670 -CONFIG_BRIDGE_IGMP_SNOOPING=y 77.671 -# CONFIG_NET_DSA is not set 77.672 -CONFIG_VLAN_8021Q=m 77.673 -# CONFIG_VLAN_8021Q_GVRP is not set 77.674 -# CONFIG_DECNET is not set 77.675 -CONFIG_LLC=m 77.676 -# CONFIG_LLC2 is not set 77.677 -CONFIG_IPX=m 77.678 -# CONFIG_IPX_INTERN is not set 77.679 -CONFIG_ATALK=m 77.680 -CONFIG_DEV_APPLETALK=m 77.681 -# CONFIG_LTPC is not set 77.682 -# CONFIG_COPS is not set 77.683 -CONFIG_IPDDP=m 77.684 -CONFIG_IPDDP_ENCAP=y 77.685 -CONFIG_IPDDP_DECAP=y 77.686 -# CONFIG_X25 is not set 77.687 -# CONFIG_LAPB is not set 77.688 -# CONFIG_ECONET is not set 77.689 -# CONFIG_WAN_ROUTER is not set 77.690 -CONFIG_PHONET=m 77.691 -# CONFIG_PHONET_PIPECTRLR is not set 77.692 -# CONFIG_IEEE802154 is not set 77.693 -CONFIG_NET_SCHED=y 77.694 - 77.695 -# 77.696 -# Queueing/Scheduling 77.697 -# 77.698 -CONFIG_NET_SCH_CBQ=m 77.699 -CONFIG_NET_SCH_HTB=m 77.700 -CONFIG_NET_SCH_HFSC=m 77.701 -CONFIG_NET_SCH_PRIO=m 77.702 -CONFIG_NET_SCH_MULTIQ=m 77.703 -CONFIG_NET_SCH_RED=m 77.704 -CONFIG_NET_SCH_SFQ=m 77.705 -CONFIG_NET_SCH_TEQL=m 77.706 -CONFIG_NET_SCH_TBF=m 77.707 -CONFIG_NET_SCH_GRED=m 77.708 -CONFIG_NET_SCH_DSMARK=m 77.709 -CONFIG_NET_SCH_NETEM=m 77.710 -CONFIG_NET_SCH_DRR=m 77.711 -# CONFIG_NET_SCH_INGRESS is not set 77.712 - 77.713 -# 77.714 -# Classification 77.715 -# 77.716 -CONFIG_NET_CLS=y 77.717 -CONFIG_NET_CLS_BASIC=m 77.718 -CONFIG_NET_CLS_TCINDEX=m 77.719 -CONFIG_NET_CLS_ROUTE4=m 77.720 -CONFIG_NET_CLS_ROUTE=y 77.721 -CONFIG_NET_CLS_FW=m 77.722 -CONFIG_NET_CLS_U32=m 77.723 -CONFIG_CLS_U32_PERF=y 77.724 -CONFIG_CLS_U32_MARK=y 77.725 -CONFIG_NET_CLS_RSVP=m 77.726 -CONFIG_NET_CLS_RSVP6=m 77.727 -CONFIG_NET_CLS_FLOW=m 77.728 -CONFIG_NET_EMATCH=y 77.729 -CONFIG_NET_EMATCH_STACK=32 77.730 -CONFIG_NET_EMATCH_CMP=m 77.731 -CONFIG_NET_EMATCH_NBYTE=m 77.732 -CONFIG_NET_EMATCH_U32=m 77.733 -CONFIG_NET_EMATCH_META=m 77.734 -CONFIG_NET_EMATCH_TEXT=m 77.735 -CONFIG_NET_CLS_ACT=y 77.736 -CONFIG_NET_ACT_POLICE=m 77.737 -CONFIG_NET_ACT_GACT=m 77.738 -# CONFIG_GACT_PROB is not set 77.739 -CONFIG_NET_ACT_MIRRED=m 77.740 -CONFIG_NET_ACT_IPT=m 77.741 -CONFIG_NET_ACT_NAT=m 77.742 -CONFIG_NET_ACT_PEDIT=m 77.743 -CONFIG_NET_ACT_SIMP=m 77.744 -CONFIG_NET_ACT_SKBEDIT=m 77.745 -# CONFIG_NET_ACT_CSUM is not set 77.746 -CONFIG_NET_CLS_IND=y 77.747 -CONFIG_NET_SCH_FIFO=y 77.748 -# CONFIG_DCB is not set 77.749 -CONFIG_DNS_RESOLVER=m 77.750 - 77.751 -# 77.752 -# Network testing 77.753 -# 77.754 -# CONFIG_NET_PKTGEN is not set 77.755 -# CONFIG_HAMRADIO is not set 77.756 -# CONFIG_CAN is not set 77.757 -CONFIG_IRDA=m 77.758 - 77.759 -# 77.760 -# IrDA protocols 77.761 -# 77.762 -CONFIG_IRLAN=m 77.763 -CONFIG_IRNET=m 77.764 -CONFIG_IRCOMM=m 77.765 -CONFIG_IRDA_ULTRA=y 77.766 - 77.767 -# 77.768 -# IrDA options 77.769 -# 77.770 -CONFIG_IRDA_CACHE_LAST_LSAP=y 77.771 -CONFIG_IRDA_FAST_RR=y 77.772 -# CONFIG_IRDA_DEBUG is not set 77.773 - 77.774 -# 77.775 -# Infrared-port device drivers 77.776 -# 77.777 - 77.778 -# 77.779 -# SIR device drivers 77.780 -# 77.781 -CONFIG_IRTTY_SIR=m 77.782 - 77.783 -# 77.784 -# Dongle support 77.785 -# 77.786 -CONFIG_DONGLE=y 77.787 -CONFIG_ESI_DONGLE=m 77.788 -CONFIG_ACTISYS_DONGLE=m 77.789 -CONFIG_TEKRAM_DONGLE=m 77.790 -CONFIG_TOIM3232_DONGLE=m 77.791 -CONFIG_LITELINK_DONGLE=m 77.792 -CONFIG_MA600_DONGLE=m 77.793 -CONFIG_GIRBIL_DONGLE=m 77.794 -CONFIG_MCP2120_DONGLE=m 77.795 -CONFIG_OLD_BELKIN_DONGLE=m 77.796 -CONFIG_ACT200L_DONGLE=m 77.797 -# CONFIG_KINGSUN_DONGLE is not set 77.798 -# CONFIG_KSDAZZLE_DONGLE is not set 77.799 -# CONFIG_KS959_DONGLE is not set 77.800 - 77.801 -# 77.802 -# FIR device drivers 77.803 -# 77.804 -# CONFIG_USB_IRDA is not set 77.805 -# CONFIG_SIGMATEL_FIR is not set 77.806 -CONFIG_NSC_FIR=m 77.807 -CONFIG_WINBOND_FIR=m 77.808 -CONFIG_TOSHIBA_FIR=m 77.809 -CONFIG_SMC_IRCC_FIR=m 77.810 -CONFIG_ALI_FIR=m 77.811 -CONFIG_VLSI_FIR=m 77.812 -CONFIG_VIA_FIR=m 77.813 -# CONFIG_MCS_FIR is not set 77.814 -CONFIG_BT=m 77.815 -CONFIG_BT_L2CAP=m 77.816 -CONFIG_BT_SCO=m 77.817 -CONFIG_BT_RFCOMM=m 77.818 -CONFIG_BT_RFCOMM_TTY=y 77.819 -CONFIG_BT_BNEP=m 77.820 -CONFIG_BT_BNEP_MC_FILTER=y 77.821 -CONFIG_BT_BNEP_PROTO_FILTER=y 77.822 -# CONFIG_BT_CMTP is not set 77.823 -CONFIG_BT_HIDP=m 77.824 - 77.825 -# 77.826 -# Bluetooth device drivers 77.827 -# 77.828 -# CONFIG_BT_HCIBTUSB is not set 77.829 -# CONFIG_BT_HCIBTSDIO is not set 77.830 -CONFIG_BT_HCIUART=m 77.831 -CONFIG_BT_HCIUART_H4=y 77.832 -CONFIG_BT_HCIUART_BCSP=y 77.833 -# CONFIG_BT_HCIUART_ATH3K is not set 77.834 -CONFIG_BT_HCIUART_LL=y 77.835 -# CONFIG_BT_HCIBCM203X is not set 77.836 -# CONFIG_BT_HCIBPA10X is not set 77.837 -# CONFIG_BT_HCIBFUSB is not set 77.838 -CONFIG_BT_HCIVHCI=m 77.839 -CONFIG_BT_MRVL=m 77.840 -# CONFIG_BT_MRVL_SDIO is not set 77.841 -CONFIG_AF_RXRPC=m 77.842 -# CONFIG_AF_RXRPC_DEBUG is not set 77.843 -# CONFIG_RXKAD is not set 77.844 -CONFIG_WIRELESS=y 77.845 -CONFIG_WIRELESS_EXT=y 77.846 -CONFIG_WEXT_CORE=y 77.847 -CONFIG_WEXT_PROC=y 77.848 -CONFIG_WEXT_SPY=y 77.849 -CONFIG_WEXT_PRIV=y 77.850 -CONFIG_CFG80211=m 77.851 -# CONFIG_NL80211_TESTMODE is not set 77.852 -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set 77.853 -# CONFIG_CFG80211_REG_DEBUG is not set 77.854 -CONFIG_CFG80211_DEFAULT_PS=y 77.855 -# CONFIG_CFG80211_INTERNAL_REGDB is not set 77.856 -CONFIG_CFG80211_WEXT=y 77.857 -CONFIG_WIRELESS_EXT_SYSFS=y 77.858 -CONFIG_LIB80211=m 77.859 -CONFIG_LIB80211_CRYPT_WEP=m 77.860 -CONFIG_LIB80211_CRYPT_CCMP=m 77.861 -CONFIG_LIB80211_CRYPT_TKIP=m 77.862 -# CONFIG_LIB80211_DEBUG is not set 77.863 -CONFIG_MAC80211=m 77.864 -CONFIG_MAC80211_HAS_RC=y 77.865 -CONFIG_MAC80211_RC_PID=y 77.866 -CONFIG_MAC80211_RC_MINSTREL=y 77.867 -CONFIG_MAC80211_RC_MINSTREL_HT=y 77.868 -# CONFIG_MAC80211_RC_DEFAULT_PID is not set 77.869 -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y 77.870 -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" 77.871 -CONFIG_MAC80211_MESH=y 77.872 -CONFIG_MAC80211_LEDS=y 77.873 -# CONFIG_MAC80211_DEBUG_MENU is not set 77.874 -CONFIG_WIMAX=m 77.875 -CONFIG_WIMAX_DEBUG_LEVEL=8 77.876 -CONFIG_RFKILL=m 77.877 -CONFIG_RFKILL_LEDS=y 77.878 -CONFIG_RFKILL_INPUT=y 77.879 -# CONFIG_NET_9P is not set 77.880 -# CONFIG_CAIF is not set 77.881 -CONFIG_CEPH_LIB=m 77.882 -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set 77.883 - 77.884 -# 77.885 -# Device Drivers 77.886 -# 77.887 - 77.888 -# 77.889 -# Generic Driver Options 77.890 -# 77.891 -CONFIG_STANDALONE=y 77.892 -CONFIG_PREVENT_FIRMWARE_BUILD=y 77.893 -CONFIG_FW_LOADER=m 77.894 -CONFIG_FIRMWARE_IN_KERNEL=y 77.895 -CONFIG_EXTRA_FIRMWARE="" 77.896 -# CONFIG_SYS_HYPERVISOR is not set 77.897 -CONFIG_CONNECTOR=m 77.898 -CONFIG_MTD=m 77.899 -# CONFIG_MTD_DEBUG is not set 77.900 -# CONFIG_MTD_TESTS is not set 77.901 -CONFIG_MTD_CONCAT=m 77.902 -CONFIG_MTD_PARTITIONS=y 77.903 -# CONFIG_MTD_REDBOOT_PARTS is not set 77.904 -# CONFIG_MTD_AR7_PARTS is not set 77.905 - 77.906 -# 77.907 -# User Modules And Translation Layers 77.908 -# 77.909 -CONFIG_MTD_CHAR=m 77.910 -CONFIG_HAVE_MTD_OTP=y 77.911 -CONFIG_MTD_BLKDEVS=m 77.912 -CONFIG_MTD_BLOCK=m 77.913 -CONFIG_MTD_BLOCK_RO=m 77.914 -CONFIG_FTL=m 77.915 -CONFIG_NFTL=m 77.916 -CONFIG_NFTL_RW=y 77.917 -CONFIG_INFTL=m 77.918 -CONFIG_RFD_FTL=m 77.919 -CONFIG_SSFDC=m 77.920 -# CONFIG_SM_FTL is not set 77.921 -CONFIG_MTD_OOPS=m 77.922 - 77.923 -# 77.924 -# RAM/ROM/Flash chip drivers 77.925 -# 77.926 -CONFIG_MTD_CFI=m 77.927 -CONFIG_MTD_JEDECPROBE=m 77.928 -CONFIG_MTD_GEN_PROBE=m 77.929 -# CONFIG_MTD_CFI_ADV_OPTIONS is not set 77.930 -CONFIG_MTD_MAP_BANK_WIDTH_1=y 77.931 -CONFIG_MTD_MAP_BANK_WIDTH_2=y 77.932 -CONFIG_MTD_MAP_BANK_WIDTH_4=y 77.933 -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set 77.934 -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set 77.935 -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set 77.936 -CONFIG_MTD_CFI_I1=y 77.937 -CONFIG_MTD_CFI_I2=y 77.938 -# CONFIG_MTD_CFI_I4 is not set 77.939 -# CONFIG_MTD_CFI_I8 is not set 77.940 -CONFIG_MTD_CFI_INTELEXT=m 77.941 -CONFIG_MTD_CFI_AMDSTD=m 77.942 -CONFIG_MTD_CFI_STAA=m 77.943 -CONFIG_MTD_CFI_UTIL=m 77.944 -CONFIG_MTD_RAM=m 77.945 -CONFIG_MTD_ROM=m 77.946 -CONFIG_MTD_ABSENT=m 77.947 - 77.948 -# 77.949 -# Mapping drivers for chip access 77.950 -# 77.951 -CONFIG_MTD_COMPLEX_MAPPINGS=y 77.952 -CONFIG_MTD_PHYSMAP=m 77.953 -CONFIG_MTD_PHYSMAP_COMPAT=y 77.954 -CONFIG_MTD_PHYSMAP_START=0x8000000 77.955 -CONFIG_MTD_PHYSMAP_LEN=0 77.956 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 77.957 -CONFIG_MTD_SC520CDP=m 77.958 -CONFIG_MTD_NETSC520=m 77.959 -CONFIG_MTD_TS5500=m 77.960 -CONFIG_MTD_SBC_GXX=m 77.961 -CONFIG_MTD_AMD76XROM=m 77.962 -CONFIG_MTD_ICHXROM=m 77.963 -CONFIG_MTD_ESB2ROM=m 77.964 -CONFIG_MTD_CK804XROM=m 77.965 -CONFIG_MTD_SCB2_FLASH=m 77.966 -CONFIG_MTD_NETtel=m 77.967 -CONFIG_MTD_L440GX=m 77.968 -CONFIG_MTD_PCI=m 77.969 -# CONFIG_MTD_GPIO_ADDR is not set 77.970 -CONFIG_MTD_INTEL_VR_NOR=m 77.971 -CONFIG_MTD_PLATRAM=m 77.972 - 77.973 -# 77.974 -# Self-contained MTD device drivers 77.975 -# 77.976 -CONFIG_MTD_PMC551=m 77.977 -# CONFIG_MTD_PMC551_BUGFIX is not set 77.978 -# CONFIG_MTD_PMC551_DEBUG is not set 77.979 -# CONFIG_MTD_DATAFLASH is not set 77.980 -# CONFIG_MTD_M25P80 is not set 77.981 -# CONFIG_MTD_SST25L is not set 77.982 -CONFIG_MTD_SLRAM=m 77.983 -CONFIG_MTD_PHRAM=m 77.984 -CONFIG_MTD_MTDRAM=m 77.985 -CONFIG_MTDRAM_TOTAL_SIZE=4096 77.986 -CONFIG_MTDRAM_ERASE_SIZE=128 77.987 -CONFIG_MTD_BLOCK2MTD=m 77.988 - 77.989 -# 77.990 -# Disk-On-Chip Device Drivers 77.991 -# 77.992 -CONFIG_MTD_DOC2000=m 77.993 -CONFIG_MTD_DOC2001=m 77.994 -CONFIG_MTD_DOC2001PLUS=m 77.995 -CONFIG_MTD_DOCPROBE=m 77.996 -CONFIG_MTD_DOCECC=m 77.997 -# CONFIG_MTD_DOCPROBE_ADVANCED is not set 77.998 -CONFIG_MTD_DOCPROBE_ADDRESS=0 77.999 -CONFIG_MTD_NAND_ECC=m 77.1000 -# CONFIG_MTD_NAND_ECC_SMC is not set 77.1001 -CONFIG_MTD_NAND=m 77.1002 -# CONFIG_MTD_NAND_VERIFY_WRITE is not set 77.1003 -# CONFIG_MTD_SM_COMMON is not set 77.1004 -# CONFIG_MTD_NAND_MUSEUM_IDS is not set 77.1005 -# CONFIG_MTD_NAND_DENALI is not set 77.1006 -CONFIG_MTD_NAND_IDS=m 77.1007 -# CONFIG_MTD_NAND_RICOH is not set 77.1008 -CONFIG_MTD_NAND_DISKONCHIP=m 77.1009 -# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set 77.1010 -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 77.1011 -# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set 77.1012 -CONFIG_MTD_NAND_CAFE=m 77.1013 -CONFIG_MTD_NAND_CS553X=m 77.1014 -CONFIG_MTD_NAND_NANDSIM=m 77.1015 -CONFIG_MTD_NAND_PLATFORM=m 77.1016 -# CONFIG_MTD_ALAUDA is not set 77.1017 -CONFIG_MTD_ONENAND=m 77.1018 -CONFIG_MTD_ONENAND_VERIFY_WRITE=y 77.1019 -CONFIG_MTD_ONENAND_GENERIC=m 77.1020 -CONFIG_MTD_ONENAND_OTP=y 77.1021 -CONFIG_MTD_ONENAND_2X_PROGRAM=y 77.1022 -CONFIG_MTD_ONENAND_SIM=m 77.1023 - 77.1024 -# 77.1025 -# LPDDR flash memory drivers 77.1026 -# 77.1027 -CONFIG_MTD_LPDDR=m 77.1028 -CONFIG_MTD_QINFO_PROBE=m 77.1029 -CONFIG_MTD_UBI=m 77.1030 -CONFIG_MTD_UBI_WL_THRESHOLD=4096 77.1031 -CONFIG_MTD_UBI_BEB_RESERVE=1 77.1032 -CONFIG_MTD_UBI_GLUEBI=m 77.1033 - 77.1034 -# 77.1035 -# UBI debugging options 77.1036 -# 77.1037 -# CONFIG_MTD_UBI_DEBUG is not set 77.1038 -CONFIG_PARPORT=m 77.1039 -CONFIG_PARPORT_PC=m 77.1040 -CONFIG_PARPORT_SERIAL=m 77.1041 -CONFIG_PARPORT_PC_FIFO=y 77.1042 -CONFIG_PARPORT_PC_SUPERIO=y 77.1043 -# CONFIG_PARPORT_GSC is not set 77.1044 -CONFIG_PARPORT_AX88796=m 77.1045 -CONFIG_PARPORT_1284=y 77.1046 -CONFIG_PARPORT_NOT_PC=y 77.1047 -CONFIG_PNP=y 77.1048 -CONFIG_PNP_DEBUG_MESSAGES=y 77.1049 - 77.1050 -# 77.1051 -# Protocols 77.1052 -# 77.1053 -CONFIG_ISAPNP=y 77.1054 -# CONFIG_PNPBIOS is not set 77.1055 -# CONFIG_PNPACPI is not set 77.1056 -CONFIG_BLK_DEV=y 77.1057 -CONFIG_BLK_DEV_FD=m 77.1058 -# CONFIG_BLK_DEV_XD is not set 77.1059 -CONFIG_PARIDE=m 77.1060 - 77.1061 -# 77.1062 -# Parallel IDE high-level drivers 77.1063 -# 77.1064 -CONFIG_PARIDE_PD=m 77.1065 -CONFIG_PARIDE_PCD=m 77.1066 -CONFIG_PARIDE_PF=m 77.1067 -CONFIG_PARIDE_PT=m 77.1068 -CONFIG_PARIDE_PG=m 77.1069 - 77.1070 -# 77.1071 -# Parallel IDE protocol modules 77.1072 -# 77.1073 -CONFIG_PARIDE_ATEN=m 77.1074 -CONFIG_PARIDE_BPCK=m 77.1075 -CONFIG_PARIDE_BPCK6=m 77.1076 -CONFIG_PARIDE_COMM=m 77.1077 -CONFIG_PARIDE_DSTR=m 77.1078 -CONFIG_PARIDE_FIT2=m 77.1079 -CONFIG_PARIDE_FIT3=m 77.1080 -CONFIG_PARIDE_EPAT=m 77.1081 -CONFIG_PARIDE_EPATC8=y 77.1082 -CONFIG_PARIDE_EPIA=m 77.1083 -CONFIG_PARIDE_FRIQ=m 77.1084 -CONFIG_PARIDE_FRPW=m 77.1085 -CONFIG_PARIDE_KBIC=m 77.1086 -CONFIG_PARIDE_KTTI=m 77.1087 -CONFIG_PARIDE_ON20=m 77.1088 -CONFIG_PARIDE_ON26=m 77.1089 -CONFIG_BLK_CPQ_DA=m 77.1090 -CONFIG_BLK_CPQ_CISS_DA=m 77.1091 -CONFIG_CISS_SCSI_TAPE=y 77.1092 -CONFIG_BLK_DEV_DAC960=m 77.1093 -CONFIG_BLK_DEV_UMEM=m 77.1094 -# CONFIG_BLK_DEV_COW_COMMON is not set 77.1095 -CONFIG_BLK_DEV_LOOP=m 77.1096 -CONFIG_BLK_DEV_CRYPTOLOOP=m 77.1097 -CONFIG_BLK_DEV_DRBD=m 77.1098 -# CONFIG_DRBD_FAULT_INJECTION is not set 77.1099 -CONFIG_BLK_DEV_NBD=m 77.1100 -# CONFIG_BLK_DEV_OSD is not set 77.1101 -CONFIG_BLK_DEV_SX8=m 77.1102 -CONFIG_BLK_DEV_UB=m 77.1103 -CONFIG_BLK_DEV_RAM=m 77.1104 -CONFIG_BLK_DEV_RAM_COUNT=16 77.1105 -CONFIG_BLK_DEV_RAM_SIZE=4096 77.1106 -CONFIG_BLK_DEV_XIP=y 77.1107 -CONFIG_CDROM_PKTCDVD=m 77.1108 -CONFIG_CDROM_PKTCDVD_BUFFERS=8 77.1109 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set 77.1110 -CONFIG_ATA_OVER_ETH=m 77.1111 -# CONFIG_VIRTIO_BLK is not set 77.1112 -# CONFIG_BLK_DEV_HD is not set 77.1113 -# CONFIG_BLK_DEV_RBD is not set 77.1114 -CONFIG_MISC_DEVICES=y 77.1115 -# CONFIG_AD525X_DPOT is not set 77.1116 -CONFIG_IBM_ASM=m 77.1117 -CONFIG_PHANTOM=m 77.1118 -CONFIG_SGI_IOC4=m 77.1119 -CONFIG_TIFM_CORE=m 77.1120 -CONFIG_TIFM_7XX1=m 77.1121 -CONFIG_ICS932S401=m 77.1122 -CONFIG_ENCLOSURE_SERVICES=m 77.1123 -CONFIG_CS5535_MFGPT=m 77.1124 -CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7 77.1125 -CONFIG_CS5535_CLOCK_EVENT_SRC=m 77.1126 -CONFIG_HP_ILO=m 77.1127 -# CONFIG_APDS9802ALS is not set 77.1128 -# CONFIG_ISL29003 is not set 77.1129 -# CONFIG_ISL29020 is not set 77.1130 -# CONFIG_SENSORS_TSL2550 is not set 77.1131 -# CONFIG_SENSORS_BH1780 is not set 77.1132 -# CONFIG_SENSORS_BH1770 is not set 77.1133 -# CONFIG_SENSORS_APDS990X is not set 77.1134 -# CONFIG_HMC6352 is not set 77.1135 -CONFIG_DS1682=m 77.1136 -# CONFIG_TI_DAC7512 is not set 77.1137 -CONFIG_VMWARE_BALLOON=m 77.1138 -# CONFIG_BMP085 is not set 77.1139 -# CONFIG_PCH_PHUB is not set 77.1140 -CONFIG_C2PORT=m 77.1141 -CONFIG_C2PORT_DURAMAR_2150=m 77.1142 - 77.1143 -# 77.1144 -# EEPROM support 77.1145 -# 77.1146 -# CONFIG_EEPROM_AT24 is not set 77.1147 -# CONFIG_EEPROM_AT25 is not set 77.1148 -# CONFIG_EEPROM_LEGACY is not set 77.1149 -# CONFIG_EEPROM_MAX6875 is not set 77.1150 -CONFIG_EEPROM_93CX6=m 77.1151 -CONFIG_CB710_CORE=m 77.1152 -# CONFIG_CB710_DEBUG is not set 77.1153 -CONFIG_CB710_DEBUG_ASSUMPTIONS=y 77.1154 -# CONFIG_IWMC3200TOP is not set 77.1155 - 77.1156 -# 77.1157 -# Texas Instruments shared transport line discipline 77.1158 -# 77.1159 -# CONFIG_TI_ST is not set 77.1160 -CONFIG_HAVE_IDE=y 77.1161 -# CONFIG_IDE is not set 77.1162 - 77.1163 -# 77.1164 -# SCSI device support 77.1165 -# 77.1166 -CONFIG_SCSI_MOD=m 77.1167 -CONFIG_RAID_ATTRS=m 77.1168 -CONFIG_SCSI=m 77.1169 -CONFIG_SCSI_DMA=y 77.1170 -CONFIG_SCSI_TGT=m 77.1171 -CONFIG_SCSI_NETLINK=y 77.1172 -CONFIG_SCSI_PROC_FS=y 77.1173 - 77.1174 -# 77.1175 -# SCSI support type (disk, tape, CD-ROM) 77.1176 -# 77.1177 -CONFIG_BLK_DEV_SD=m 77.1178 -CONFIG_CHR_DEV_ST=m 77.1179 -CONFIG_CHR_DEV_OSST=m 77.1180 -CONFIG_BLK_DEV_SR=m 77.1181 -CONFIG_BLK_DEV_SR_VENDOR=y 77.1182 -CONFIG_CHR_DEV_SG=m 77.1183 -CONFIG_CHR_DEV_SCH=m 77.1184 -CONFIG_SCSI_ENCLOSURE=m 77.1185 -CONFIG_SCSI_MULTI_LUN=y 77.1186 -# CONFIG_SCSI_CONSTANTS is not set 77.1187 -# CONFIG_SCSI_LOGGING is not set 77.1188 -CONFIG_SCSI_SCAN_ASYNC=y 77.1189 -CONFIG_SCSI_WAIT_SCAN=m 77.1190 - 77.1191 -# 77.1192 -# SCSI Transports 77.1193 -# 77.1194 -CONFIG_SCSI_SPI_ATTRS=m 77.1195 -CONFIG_SCSI_FC_ATTRS=m 77.1196 -CONFIG_SCSI_FC_TGT_ATTRS=y 77.1197 -CONFIG_SCSI_ISCSI_ATTRS=m 77.1198 -CONFIG_SCSI_SAS_ATTRS=m 77.1199 -CONFIG_SCSI_SAS_LIBSAS=m 77.1200 -CONFIG_SCSI_SAS_ATA=y 77.1201 -CONFIG_SCSI_SAS_HOST_SMP=y 77.1202 -CONFIG_SCSI_SAS_LIBSAS_DEBUG=y 77.1203 -CONFIG_SCSI_SRP_ATTRS=m 77.1204 -CONFIG_SCSI_SRP_TGT_ATTRS=y 77.1205 -CONFIG_SCSI_LOWLEVEL=y 77.1206 -CONFIG_ISCSI_TCP=m 77.1207 -CONFIG_ISCSI_BOOT_SYSFS=m 77.1208 -CONFIG_SCSI_CXGB3_ISCSI=m 77.1209 -# CONFIG_SCSI_CXGB4_ISCSI is not set 77.1210 -CONFIG_SCSI_BNX2_ISCSI=m 77.1211 -CONFIG_BE2ISCSI=m 77.1212 -CONFIG_BLK_DEV_3W_XXXX_RAID=m 77.1213 -CONFIG_SCSI_HPSA=m 77.1214 -CONFIG_SCSI_3W_9XXX=m 77.1215 -CONFIG_SCSI_3W_SAS=m 77.1216 -CONFIG_SCSI_7000FASST=m 77.1217 -CONFIG_SCSI_ACARD=m 77.1218 -CONFIG_SCSI_AHA152X=m 77.1219 -CONFIG_SCSI_AHA1542=m 77.1220 -CONFIG_SCSI_AACRAID=m 77.1221 -CONFIG_SCSI_AIC7XXX=m 77.1222 -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 77.1223 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 77.1224 -CONFIG_AIC7XXX_DEBUG_ENABLE=y 77.1225 -CONFIG_AIC7XXX_DEBUG_MASK=0 77.1226 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y 77.1227 -# CONFIG_SCSI_AIC7XXX_OLD is not set 77.1228 -CONFIG_SCSI_AIC79XX=m 77.1229 -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 77.1230 -CONFIG_AIC79XX_RESET_DELAY_MS=5000 77.1231 -CONFIG_AIC79XX_DEBUG_ENABLE=y 77.1232 -CONFIG_AIC79XX_DEBUG_MASK=0 77.1233 -CONFIG_AIC79XX_REG_PRETTY_PRINT=y 77.1234 -CONFIG_SCSI_AIC94XX=m 77.1235 -CONFIG_AIC94XX_DEBUG=y 77.1236 -CONFIG_SCSI_MVSAS=m 77.1237 -CONFIG_SCSI_MVSAS_DEBUG=y 77.1238 -CONFIG_SCSI_DPT_I2O=m 77.1239 -CONFIG_SCSI_ADVANSYS=m 77.1240 -CONFIG_SCSI_IN2000=m 77.1241 -CONFIG_SCSI_ARCMSR=m 77.1242 -CONFIG_MEGARAID_NEWGEN=y 77.1243 -CONFIG_MEGARAID_MM=m 77.1244 -CONFIG_MEGARAID_MAILBOX=m 77.1245 -CONFIG_MEGARAID_LEGACY=m 77.1246 -CONFIG_MEGARAID_SAS=m 77.1247 -CONFIG_SCSI_MPT2SAS=m 77.1248 -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 77.1249 -CONFIG_SCSI_MPT2SAS_LOGGING=y 77.1250 -CONFIG_SCSI_HPTIOP=m 77.1251 -CONFIG_SCSI_BUSLOGIC=m 77.1252 -CONFIG_SCSI_FLASHPOINT=y 77.1253 -CONFIG_VMWARE_PVSCSI=m 77.1254 -CONFIG_LIBFC=m 77.1255 -CONFIG_LIBFCOE=m 77.1256 -CONFIG_FCOE=m 77.1257 -CONFIG_FCOE_FNIC=m 77.1258 -CONFIG_SCSI_DMX3191D=m 77.1259 -CONFIG_SCSI_DTC3280=m 77.1260 -CONFIG_SCSI_EATA=m 77.1261 -CONFIG_SCSI_EATA_TAGGED_QUEUE=y 77.1262 -CONFIG_SCSI_EATA_LINKED_COMMANDS=y 77.1263 -CONFIG_SCSI_EATA_MAX_TAGS=16 77.1264 -CONFIG_SCSI_FUTURE_DOMAIN=m 77.1265 -CONFIG_SCSI_GDTH=m 77.1266 -CONFIG_SCSI_GENERIC_NCR5380=m 77.1267 -CONFIG_SCSI_GENERIC_NCR5380_MMIO=m 77.1268 -CONFIG_SCSI_GENERIC_NCR53C400=y 77.1269 -CONFIG_SCSI_IPS=m 77.1270 -CONFIG_SCSI_INITIO=m 77.1271 -CONFIG_SCSI_INIA100=m 77.1272 -CONFIG_SCSI_PPA=m 77.1273 -CONFIG_SCSI_IMM=m 77.1274 -CONFIG_SCSI_IZIP_EPP16=y 77.1275 -CONFIG_SCSI_IZIP_SLOW_CTR=y 77.1276 -CONFIG_SCSI_NCR53C406A=m 77.1277 -CONFIG_SCSI_STEX=m 77.1278 -CONFIG_SCSI_SYM53C8XX_2=m 77.1279 -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 77.1280 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 77.1281 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 77.1282 -CONFIG_SCSI_SYM53C8XX_MMIO=y 77.1283 -# CONFIG_SCSI_IPR is not set 77.1284 -CONFIG_SCSI_PAS16=m 77.1285 -CONFIG_SCSI_QLOGIC_FAS=m 77.1286 -CONFIG_SCSI_QLOGIC_1280=m 77.1287 -CONFIG_SCSI_QLA_FC=m 77.1288 -CONFIG_SCSI_QLA_ISCSI=m 77.1289 -CONFIG_SCSI_LPFC=m 77.1290 -CONFIG_SCSI_SYM53C416=m 77.1291 -CONFIG_SCSI_DC395x=m 77.1292 -CONFIG_SCSI_DC390T=m 77.1293 -CONFIG_SCSI_T128=m 77.1294 -CONFIG_SCSI_U14_34F=m 77.1295 -CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y 77.1296 -CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y 77.1297 -CONFIG_SCSI_U14_34F_MAX_TAGS=8 77.1298 -CONFIG_SCSI_ULTRASTOR=m 77.1299 -CONFIG_SCSI_NSP32=m 77.1300 -CONFIG_SCSI_DEBUG=m 77.1301 -CONFIG_SCSI_PMCRAID=m 77.1302 -CONFIG_SCSI_PM8001=m 77.1303 -CONFIG_SCSI_SRP=m 77.1304 -CONFIG_SCSI_BFA_FC=m 77.1305 -CONFIG_SCSI_DH=m 77.1306 -CONFIG_SCSI_DH_RDAC=m 77.1307 -CONFIG_SCSI_DH_HP_SW=m 77.1308 -CONFIG_SCSI_DH_EMC=m 77.1309 -CONFIG_SCSI_DH_ALUA=m 77.1310 -CONFIG_SCSI_OSD_INITIATOR=m 77.1311 -CONFIG_SCSI_OSD_ULD=m 77.1312 -CONFIG_SCSI_OSD_DPRINT_SENSE=1 77.1313 -CONFIG_SCSI_OSD_DEBUG=y 77.1314 -CONFIG_ATA=m 77.1315 -# CONFIG_ATA_NONSTANDARD is not set 77.1316 -CONFIG_ATA_VERBOSE_ERROR=y 77.1317 -CONFIG_SATA_PMP=y 77.1318 - 77.1319 -# 77.1320 -# Controllers with non-SFF native interface 77.1321 -# 77.1322 -CONFIG_SATA_AHCI=m 77.1323 -# CONFIG_SATA_AHCI_PLATFORM is not set 77.1324 -CONFIG_SATA_INIC162X=m 77.1325 -CONFIG_SATA_SIL24=m 77.1326 -CONFIG_ATA_SFF=y 77.1327 - 77.1328 -# 77.1329 -# SFF controllers with custom DMA interface 77.1330 -# 77.1331 -CONFIG_PDC_ADMA=m 77.1332 -CONFIG_SATA_QSTOR=m 77.1333 -CONFIG_SATA_SX4=m 77.1334 -CONFIG_ATA_BMDMA=y 77.1335 - 77.1336 -# 77.1337 -# SATA SFF controllers with BMDMA 77.1338 -# 77.1339 -CONFIG_ATA_PIIX=m 77.1340 -CONFIG_SATA_MV=m 77.1341 -CONFIG_SATA_NV=m 77.1342 -CONFIG_SATA_PROMISE=m 77.1343 -CONFIG_SATA_SIL=m 77.1344 -CONFIG_SATA_SIS=m 77.1345 -CONFIG_SATA_SVW=m 77.1346 -CONFIG_SATA_ULI=m 77.1347 -CONFIG_SATA_VIA=m 77.1348 -CONFIG_SATA_VITESSE=m 77.1349 - 77.1350 -# 77.1351 -# PATA SFF controllers with BMDMA 77.1352 -# 77.1353 -CONFIG_PATA_ALI=m 77.1354 -CONFIG_PATA_AMD=m 77.1355 -CONFIG_PATA_ARTOP=m 77.1356 -CONFIG_PATA_ATIIXP=m 77.1357 -CONFIG_PATA_ATP867X=m 77.1358 -CONFIG_PATA_CMD64X=m 77.1359 -CONFIG_PATA_CS5520=m 77.1360 -CONFIG_PATA_CS5530=m 77.1361 -CONFIG_PATA_CS5535=m 77.1362 -CONFIG_PATA_CS5536=m 77.1363 -CONFIG_PATA_CYPRESS=m 77.1364 -CONFIG_PATA_EFAR=m 77.1365 -CONFIG_PATA_HPT366=m 77.1366 -CONFIG_PATA_HPT37X=m 77.1367 -CONFIG_PATA_HPT3X2N=m 77.1368 -CONFIG_PATA_HPT3X3=m 77.1369 -CONFIG_PATA_HPT3X3_DMA=y 77.1370 -CONFIG_PATA_IT8213=m 77.1371 -CONFIG_PATA_IT821X=m 77.1372 -CONFIG_PATA_JMICRON=m 77.1373 -CONFIG_PATA_MARVELL=m 77.1374 -CONFIG_PATA_NETCELL=m 77.1375 -CONFIG_PATA_NINJA32=m 77.1376 -CONFIG_PATA_NS87415=m 77.1377 -CONFIG_PATA_OLDPIIX=m 77.1378 -CONFIG_PATA_OPTIDMA=m 77.1379 -CONFIG_PATA_PDC2027X=m 77.1380 -CONFIG_PATA_PDC_OLD=m 77.1381 -CONFIG_PATA_RADISYS=m 77.1382 -CONFIG_PATA_RDC=m 77.1383 -CONFIG_PATA_SC1200=m 77.1384 -CONFIG_PATA_SCH=m 77.1385 -CONFIG_PATA_SERVERWORKS=m 77.1386 -CONFIG_PATA_SIL680=m 77.1387 -CONFIG_PATA_SIS=m 77.1388 -CONFIG_PATA_TOSHIBA=m 77.1389 -CONFIG_PATA_TRIFLEX=m 77.1390 -CONFIG_PATA_VIA=m 77.1391 -CONFIG_PATA_WINBOND=m 77.1392 - 77.1393 -# 77.1394 -# PIO-only SFF controllers 77.1395 -# 77.1396 -CONFIG_PATA_CMD640_PCI=m 77.1397 -CONFIG_PATA_ISAPNP=m 77.1398 -CONFIG_PATA_MPIIX=m 77.1399 -CONFIG_PATA_NS87410=m 77.1400 -CONFIG_PATA_OPTI=m 77.1401 -CONFIG_PATA_PLATFORM=m 77.1402 -CONFIG_PATA_QDI=m 77.1403 -CONFIG_PATA_RZ1000=m 77.1404 -CONFIG_PATA_WINBOND_VLB=m 77.1405 - 77.1406 -# 77.1407 -# Generic fallback / legacy drivers 77.1408 -# 77.1409 -CONFIG_ATA_GENERIC=m 77.1410 -CONFIG_PATA_LEGACY=m 77.1411 -CONFIG_MD=y 77.1412 -CONFIG_BLK_DEV_MD=m 77.1413 -CONFIG_MD_LINEAR=m 77.1414 -CONFIG_MD_RAID0=m 77.1415 -CONFIG_MD_RAID1=m 77.1416 -CONFIG_MD_RAID10=m 77.1417 -CONFIG_MD_RAID456=m 77.1418 -CONFIG_MD_MULTIPATH=m 77.1419 -CONFIG_MD_FAULTY=m 77.1420 -CONFIG_BLK_DEV_DM=m 77.1421 -# CONFIG_DM_DEBUG is not set 77.1422 -CONFIG_DM_CRYPT=m 77.1423 -CONFIG_DM_SNAPSHOT=m 77.1424 -CONFIG_DM_MIRROR=m 77.1425 -CONFIG_DM_LOG_USERSPACE=m 77.1426 -CONFIG_DM_ZERO=m 77.1427 -CONFIG_DM_MULTIPATH=m 77.1428 -CONFIG_DM_MULTIPATH_QL=m 77.1429 -CONFIG_DM_MULTIPATH_ST=m 77.1430 -CONFIG_DM_DELAY=m 77.1431 -CONFIG_DM_UEVENT=y 77.1432 -CONFIG_FUSION=y 77.1433 -CONFIG_FUSION_SPI=m 77.1434 -CONFIG_FUSION_FC=m 77.1435 -CONFIG_FUSION_SAS=m 77.1436 -CONFIG_FUSION_MAX_SGE=128 77.1437 -CONFIG_FUSION_CTL=m 77.1438 -CONFIG_FUSION_LAN=m 77.1439 -CONFIG_FUSION_LOGGING=y 77.1440 - 77.1441 -# 77.1442 -# IEEE 1394 (FireWire) support 77.1443 -# 77.1444 -CONFIG_FIREWIRE=m 77.1445 -CONFIG_FIREWIRE_OHCI=m 77.1446 -CONFIG_FIREWIRE_OHCI_DEBUG=y 77.1447 -CONFIG_FIREWIRE_SBP2=m 77.1448 -CONFIG_FIREWIRE_NET=m 77.1449 -# CONFIG_FIREWIRE_NOSY is not set 77.1450 -CONFIG_I2O=m 77.1451 -CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y 77.1452 -CONFIG_I2O_EXT_ADAPTEC=y 77.1453 -CONFIG_I2O_CONFIG=m 77.1454 -# CONFIG_I2O_CONFIG_OLD_IOCTL is not set 77.1455 -CONFIG_I2O_BUS=m 77.1456 -CONFIG_I2O_BLOCK=m 77.1457 -CONFIG_I2O_SCSI=m 77.1458 -CONFIG_I2O_PROC=m 77.1459 -CONFIG_MACINTOSH_DRIVERS=y 77.1460 -CONFIG_MAC_EMUMOUSEBTN=m 77.1461 -CONFIG_NETDEVICES=y 77.1462 -CONFIG_IFB=m 77.1463 -CONFIG_DUMMY=m 77.1464 -CONFIG_BONDING=m 77.1465 -CONFIG_MACVLAN=m 77.1466 -CONFIG_MACVTAP=m 77.1467 -CONFIG_EQUALIZER=m 77.1468 -CONFIG_TUN=m 77.1469 -CONFIG_VETH=m 77.1470 -CONFIG_NET_SB1000=m 77.1471 -CONFIG_ARCNET=m 77.1472 -CONFIG_ARCNET_1201=m 77.1473 -CONFIG_ARCNET_1051=m 77.1474 -CONFIG_ARCNET_RAW=m 77.1475 -CONFIG_ARCNET_CAP=m 77.1476 -CONFIG_ARCNET_COM90xx=m 77.1477 -CONFIG_ARCNET_COM90xxIO=m 77.1478 -CONFIG_ARCNET_RIM_I=m 77.1479 -CONFIG_ARCNET_COM20020=m 77.1480 -CONFIG_ARCNET_COM20020_ISA=m 77.1481 -CONFIG_ARCNET_COM20020_PCI=m 77.1482 -CONFIG_MII=m 77.1483 -CONFIG_PHYLIB=m 77.1484 - 77.1485 -# 77.1486 -# MII PHY device drivers 77.1487 -# 77.1488 -CONFIG_MARVELL_PHY=m 77.1489 -CONFIG_DAVICOM_PHY=m 77.1490 -CONFIG_QSEMI_PHY=m 77.1491 -CONFIG_LXT_PHY=m 77.1492 -CONFIG_CICADA_PHY=m 77.1493 -CONFIG_VITESSE_PHY=m 77.1494 -CONFIG_SMSC_PHY=m 77.1495 -CONFIG_BROADCOM_PHY=m 77.1496 -# CONFIG_BCM63XX_PHY is not set 77.1497 -CONFIG_ICPLUS_PHY=m 77.1498 -CONFIG_REALTEK_PHY=m 77.1499 -CONFIG_NATIONAL_PHY=m 77.1500 -CONFIG_STE10XP=m 77.1501 -CONFIG_LSI_ET1011C_PHY=m 77.1502 -CONFIG_MICREL_PHY=m 77.1503 -CONFIG_MDIO_BITBANG=m 77.1504 -CONFIG_MDIO_GPIO=m 77.1505 -CONFIG_NET_ETHERNET=y 77.1506 -CONFIG_HAPPYMEAL=m 77.1507 -CONFIG_SUNGEM=m 77.1508 -CONFIG_CASSINI=m 77.1509 -CONFIG_NET_VENDOR_3COM=y 77.1510 -CONFIG_EL1=m 77.1511 -CONFIG_EL2=m 77.1512 -CONFIG_ELPLUS=m 77.1513 -CONFIG_EL16=m 77.1514 -CONFIG_EL3=m 77.1515 -CONFIG_3C515=m 77.1516 -CONFIG_VORTEX=m 77.1517 -CONFIG_TYPHOON=m 77.1518 -CONFIG_LANCE=m 77.1519 -CONFIG_NET_VENDOR_SMC=y 77.1520 -CONFIG_WD80x3=m 77.1521 -CONFIG_ULTRA=m 77.1522 -CONFIG_SMC9194=m 77.1523 -CONFIG_ENC28J60=m 77.1524 -CONFIG_ENC28J60_WRITEVERIFY=y 77.1525 -CONFIG_ETHOC=m 77.1526 -CONFIG_NET_VENDOR_RACAL=y 77.1527 -CONFIG_NI5010=m 77.1528 -CONFIG_NI52=m 77.1529 -CONFIG_NI65=m 77.1530 -CONFIG_DNET=m 77.1531 -CONFIG_NET_TULIP=y 77.1532 -CONFIG_DE2104X=m 77.1533 -CONFIG_DE2104X_DSL=0 77.1534 -CONFIG_TULIP=m 77.1535 -# CONFIG_TULIP_MWI is not set 77.1536 -# CONFIG_TULIP_MMIO is not set 77.1537 -# CONFIG_TULIP_NAPI is not set 77.1538 -CONFIG_DE4X5=m 77.1539 -CONFIG_WINBOND_840=m 77.1540 -CONFIG_DM9102=m 77.1541 -CONFIG_ULI526X=m 77.1542 -CONFIG_AT1700=m 77.1543 -CONFIG_DEPCA=m 77.1544 -CONFIG_HP100=m 77.1545 -CONFIG_NET_ISA=y 77.1546 -CONFIG_E2100=m 77.1547 -CONFIG_EWRK3=m 77.1548 -CONFIG_EEXPRESS=m 77.1549 -CONFIG_EEXPRESS_PRO=m 77.1550 -CONFIG_HPLAN_PLUS=m 77.1551 -CONFIG_HPLAN=m 77.1552 -CONFIG_LP486E=m 77.1553 -CONFIG_ETH16I=m 77.1554 -CONFIG_NE2000=m 77.1555 -CONFIG_ZNET=m 77.1556 -CONFIG_SEEQ8005=m 77.1557 -# CONFIG_IBM_NEW_EMAC_ZMII is not set 77.1558 -# CONFIG_IBM_NEW_EMAC_RGMII is not set 77.1559 -# CONFIG_IBM_NEW_EMAC_TAH is not set 77.1560 -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set 77.1561 -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set 77.1562 -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set 77.1563 -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set 77.1564 -CONFIG_NET_PCI=y 77.1565 -CONFIG_PCNET32=m 77.1566 -CONFIG_AMD8111_ETH=m 77.1567 -CONFIG_ADAPTEC_STARFIRE=m 77.1568 -CONFIG_AC3200=m 77.1569 -CONFIG_KSZ884X_PCI=m 77.1570 -CONFIG_APRICOT=m 77.1571 -CONFIG_B44=m 77.1572 -CONFIG_B44_PCI_AUTOSELECT=y 77.1573 -CONFIG_B44_PCICORE_AUTOSELECT=y 77.1574 -CONFIG_B44_PCI=y 77.1575 -CONFIG_FORCEDETH=m 77.1576 -CONFIG_CS89x0=m 77.1577 -CONFIG_E100=m 77.1578 -CONFIG_FEALNX=m 77.1579 -CONFIG_NATSEMI=m 77.1580 -CONFIG_NE2K_PCI=m 77.1581 -CONFIG_8139CP=m 77.1582 -CONFIG_8139TOO=m 77.1583 -CONFIG_8139TOO_PIO=y 77.1584 -# CONFIG_8139TOO_TUNE_TWISTER is not set 77.1585 -# CONFIG_8139TOO_8129 is not set 77.1586 -# CONFIG_8139_OLD_RX_RESET is not set 77.1587 -CONFIG_R6040=m 77.1588 -CONFIG_SIS900=m 77.1589 -CONFIG_EPIC100=m 77.1590 -CONFIG_SMSC9420=m 77.1591 -CONFIG_SUNDANCE=m 77.1592 -# CONFIG_SUNDANCE_MMIO is not set 77.1593 -CONFIG_TLAN=m 77.1594 -CONFIG_KS8842=m 77.1595 -CONFIG_KS8851=m 77.1596 -CONFIG_KS8851_MLL=m 77.1597 -CONFIG_VIA_RHINE=m 77.1598 -# CONFIG_VIA_RHINE_MMIO is not set 77.1599 -CONFIG_SC92031=m 77.1600 -CONFIG_NET_POCKET=y 77.1601 -CONFIG_ATP=m 77.1602 -CONFIG_DE600=m 77.1603 -CONFIG_DE620=m 77.1604 -CONFIG_ATL2=m 77.1605 -CONFIG_NETDEV_1000=y 77.1606 -CONFIG_ACENIC=m 77.1607 -# CONFIG_ACENIC_OMIT_TIGON_I is not set 77.1608 -CONFIG_DL2K=m 77.1609 -CONFIG_E1000=m 77.1610 -CONFIG_E1000E=m 77.1611 -CONFIG_IP1000=m 77.1612 -CONFIG_IGB=m 77.1613 -CONFIG_IGB_DCA=y 77.1614 -CONFIG_IGBVF=m 77.1615 -CONFIG_NS83820=m 77.1616 -CONFIG_HAMACHI=m 77.1617 -CONFIG_YELLOWFIN=m 77.1618 -CONFIG_R8169=m 77.1619 -CONFIG_R8169_VLAN=y 77.1620 -CONFIG_SIS190=m 77.1621 -CONFIG_SKGE=m 77.1622 -CONFIG_SKY2=m 77.1623 -CONFIG_VIA_VELOCITY=m 77.1624 -CONFIG_TIGON3=m 77.1625 -CONFIG_BNX2=m 77.1626 -CONFIG_CNIC=m 77.1627 -CONFIG_QLA3XXX=m 77.1628 -CONFIG_ATL1=m 77.1629 -CONFIG_ATL1E=m 77.1630 -CONFIG_ATL1C=m 77.1631 -CONFIG_JME=m 77.1632 -# CONFIG_STMMAC_ETH is not set 77.1633 -# CONFIG_PCH_GBE is not set 77.1634 -CONFIG_NETDEV_10000=y 77.1635 -CONFIG_MDIO=m 77.1636 -CONFIG_CHELSIO_T1=m 77.1637 -CONFIG_CHELSIO_T1_1G=y 77.1638 -CONFIG_CHELSIO_T3_DEPENDS=y 77.1639 -CONFIG_CHELSIO_T3=m 77.1640 -CONFIG_CHELSIO_T4_DEPENDS=y 77.1641 -CONFIG_CHELSIO_T4=m 77.1642 -CONFIG_CHELSIO_T4VF_DEPENDS=y 77.1643 -# CONFIG_CHELSIO_T4VF is not set 77.1644 -CONFIG_ENIC=m 77.1645 -CONFIG_IXGBE=m 77.1646 -CONFIG_IXGBE_DCA=y 77.1647 -CONFIG_IXGB=m 77.1648 -CONFIG_S2IO=m 77.1649 -CONFIG_VXGE=m 77.1650 -CONFIG_VXGE_DEBUG_TRACE_ALL=y 77.1651 -CONFIG_MYRI10GE=m 77.1652 -CONFIG_MYRI10GE_DCA=y 77.1653 -CONFIG_NETXEN_NIC=m 77.1654 -CONFIG_NIU=m 77.1655 -CONFIG_MLX4_EN=m 77.1656 -CONFIG_MLX4_CORE=m 77.1657 -CONFIG_MLX4_DEBUG=y 77.1658 -CONFIG_TEHUTI=m 77.1659 -CONFIG_BNX2X=m 77.1660 -CONFIG_QLCNIC=m 77.1661 -CONFIG_QLGE=m 77.1662 -# CONFIG_BNA is not set 77.1663 -CONFIG_SFC=m 77.1664 -CONFIG_SFC_MTD=y 77.1665 -CONFIG_BE2NET=m 77.1666 -CONFIG_TR=m 77.1667 -CONFIG_IBMTR=m 77.1668 -CONFIG_IBMOL=m 77.1669 -CONFIG_IBMLS=m 77.1670 -CONFIG_3C359=m 77.1671 -CONFIG_TMS380TR=m 77.1672 -CONFIG_TMSPCI=m 77.1673 -CONFIG_SKISA=m 77.1674 -CONFIG_PROTEON=m 77.1675 -CONFIG_ABYSS=m 77.1676 -CONFIG_SMCTR=m 77.1677 -CONFIG_WLAN=y 77.1678 -CONFIG_LIBERTAS_THINFIRM=m 77.1679 -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set 77.1680 -CONFIG_LIBERTAS_THINFIRM_USB=m 77.1681 -CONFIG_AIRO=m 77.1682 -CONFIG_ATMEL=m 77.1683 -CONFIG_PCI_ATMEL=m 77.1684 -CONFIG_AT76C50X_USB=m 77.1685 -CONFIG_PRISM54=m 77.1686 -CONFIG_USB_ZD1201=m 77.1687 -CONFIG_USB_NET_RNDIS_WLAN=m 77.1688 -CONFIG_RTL8180=m 77.1689 -CONFIG_RTL8187=m 77.1690 -CONFIG_RTL8187_LEDS=y 77.1691 -CONFIG_ADM8211=m 77.1692 -CONFIG_MAC80211_HWSIM=m 77.1693 -CONFIG_MWL8K=m 77.1694 -CONFIG_ATH_COMMON=m 77.1695 -# CONFIG_ATH_DEBUG is not set 77.1696 -# CONFIG_ATH5K is not set 77.1697 -# CONFIG_ATH9K is not set 77.1698 -# CONFIG_ATH9K_HTC is not set 77.1699 -# CONFIG_AR9170_USB is not set 77.1700 -# CONFIG_CARL9170 is not set 77.1701 -CONFIG_B43=m 77.1702 -CONFIG_B43_PCI_AUTOSELECT=y 77.1703 -CONFIG_B43_PCICORE_AUTOSELECT=y 77.1704 -# CONFIG_B43_SDIO is not set 77.1705 -CONFIG_B43_PIO=y 77.1706 -CONFIG_B43_PHY_LP=y 77.1707 -CONFIG_B43_LEDS=y 77.1708 -CONFIG_B43_HWRNG=y 77.1709 -# CONFIG_B43_DEBUG is not set 77.1710 -CONFIG_B43LEGACY=m 77.1711 -CONFIG_B43LEGACY_PCI_AUTOSELECT=y 77.1712 -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y 77.1713 -CONFIG_B43LEGACY_LEDS=y 77.1714 -CONFIG_B43LEGACY_HWRNG=y 77.1715 -CONFIG_B43LEGACY_DEBUG=y 77.1716 -CONFIG_B43LEGACY_DMA=y 77.1717 -CONFIG_B43LEGACY_PIO=y 77.1718 -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y 77.1719 -# CONFIG_B43LEGACY_DMA_MODE is not set 77.1720 -# CONFIG_B43LEGACY_PIO_MODE is not set 77.1721 -CONFIG_HOSTAP=m 77.1722 -CONFIG_HOSTAP_FIRMWARE=y 77.1723 -CONFIG_HOSTAP_FIRMWARE_NVRAM=y 77.1724 -CONFIG_HOSTAP_PLX=m 77.1725 -CONFIG_HOSTAP_PCI=m 77.1726 -CONFIG_IPW2100=m 77.1727 -CONFIG_IPW2100_MONITOR=y 77.1728 -# CONFIG_IPW2100_DEBUG is not set 77.1729 -CONFIG_IPW2200=m 77.1730 -CONFIG_IPW2200_MONITOR=y 77.1731 -CONFIG_IPW2200_RADIOTAP=y 77.1732 -CONFIG_IPW2200_PROMISCUOUS=y 77.1733 -CONFIG_IPW2200_QOS=y 77.1734 -# CONFIG_IPW2200_DEBUG is not set 77.1735 -CONFIG_LIBIPW=m 77.1736 -# CONFIG_LIBIPW_DEBUG is not set 77.1737 -CONFIG_IWLWIFI=m 77.1738 - 77.1739 -# 77.1740 -# Debugging Options 77.1741 -# 77.1742 -# CONFIG_IWLWIFI_DEBUG is not set 77.1743 -CONFIG_IWLAGN=m 77.1744 -CONFIG_IWL4965=y 77.1745 -CONFIG_IWL5000=y 77.1746 -CONFIG_IWL3945=m 77.1747 -# CONFIG_IWM is not set 77.1748 -CONFIG_LIBERTAS=m 77.1749 -CONFIG_LIBERTAS_USB=m 77.1750 -# CONFIG_LIBERTAS_SDIO is not set 77.1751 -CONFIG_LIBERTAS_SPI=m 77.1752 -# CONFIG_LIBERTAS_DEBUG is not set 77.1753 -CONFIG_LIBERTAS_MESH=y 77.1754 -CONFIG_HERMES=m 77.1755 -# CONFIG_HERMES_PRISM is not set 77.1756 -CONFIG_HERMES_CACHE_FW_ON_INIT=y 77.1757 -CONFIG_PLX_HERMES=m 77.1758 -CONFIG_TMD_HERMES=m 77.1759 -CONFIG_NORTEL_HERMES=m 77.1760 -# CONFIG_ORINOCO_USB is not set 77.1761 -CONFIG_P54_COMMON=m 77.1762 -CONFIG_P54_USB=m 77.1763 -CONFIG_P54_PCI=m 77.1764 -CONFIG_P54_SPI=m 77.1765 -# CONFIG_P54_SPI_DEFAULT_EEPROM is not set 77.1766 -CONFIG_P54_LEDS=y 77.1767 -CONFIG_RT2X00=m 77.1768 -CONFIG_RT2400PCI=m 77.1769 -CONFIG_RT2500PCI=m 77.1770 -CONFIG_RT61PCI=m 77.1771 -CONFIG_RT2800PCI_PCI=y 77.1772 -CONFIG_RT2800PCI=m 77.1773 -CONFIG_RT2800PCI_RT30XX=y 77.1774 -CONFIG_RT2800PCI_RT35XX=y 77.1775 -# CONFIG_RT2500USB is not set 77.1776 -# CONFIG_RT73USB is not set 77.1777 -# CONFIG_RT2800USB is not set 77.1778 -CONFIG_RT2800_LIB=m 77.1779 -CONFIG_RT2X00_LIB_PCI=m 77.1780 -CONFIG_RT2X00_LIB=m 77.1781 -CONFIG_RT2X00_LIB_HT=y 77.1782 -CONFIG_RT2X00_LIB_FIRMWARE=y 77.1783 -CONFIG_RT2X00_LIB_CRYPTO=y 77.1784 -CONFIG_RT2X00_LIB_LEDS=y 77.1785 -# CONFIG_RT2X00_DEBUG is not set 77.1786 -CONFIG_WL1251=m 77.1787 -CONFIG_WL1251_SPI=m 77.1788 -# CONFIG_WL1251_SDIO is not set 77.1789 -CONFIG_WL12XX=m 77.1790 -CONFIG_WL1271=m 77.1791 -# CONFIG_WL1271_SPI is not set 77.1792 -# CONFIG_WL1271_SDIO is not set 77.1793 -CONFIG_ZD1211RW=m 77.1794 -# CONFIG_ZD1211RW_DEBUG is not set 77.1795 - 77.1796 -# 77.1797 -# WiMAX Wireless Broadband devices 77.1798 -# 77.1799 -CONFIG_WIMAX_I2400M=m 77.1800 -CONFIG_WIMAX_I2400M_USB=m 77.1801 -# CONFIG_WIMAX_I2400M_SDIO is not set 77.1802 -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 77.1803 - 77.1804 -# 77.1805 -# USB Network Adapters 77.1806 -# 77.1807 -CONFIG_USB_CATC=m 77.1808 -CONFIG_USB_KAWETH=m 77.1809 -CONFIG_USB_PEGASUS=m 77.1810 -CONFIG_USB_RTL8150=m 77.1811 -CONFIG_USB_USBNET=m 77.1812 -CONFIG_USB_NET_AX8817X=m 77.1813 -CONFIG_USB_NET_CDCETHER=m 77.1814 -CONFIG_USB_NET_CDC_EEM=m 77.1815 -CONFIG_USB_NET_DM9601=m 77.1816 -CONFIG_USB_NET_SMSC75XX=m 77.1817 -CONFIG_USB_NET_SMSC95XX=m 77.1818 -CONFIG_USB_NET_GL620A=m 77.1819 -CONFIG_USB_NET_NET1080=m 77.1820 -CONFIG_USB_NET_PLUSB=m 77.1821 -CONFIG_USB_NET_MCS7830=m 77.1822 -CONFIG_USB_NET_RNDIS_HOST=m 77.1823 -CONFIG_USB_NET_CDC_SUBSET=m 77.1824 -CONFIG_USB_ALI_M5632=y 77.1825 -CONFIG_USB_AN2720=y 77.1826 -CONFIG_USB_BELKIN=y 77.1827 -CONFIG_USB_ARMLINUX=y 77.1828 -CONFIG_USB_EPSON2888=y 77.1829 -CONFIG_USB_KC2190=y 77.1830 -CONFIG_USB_NET_ZAURUS=m 77.1831 -# CONFIG_USB_NET_CX82310_ETH is not set 77.1832 -CONFIG_USB_HSO=m 77.1833 -CONFIG_USB_NET_INT51X1=m 77.1834 -CONFIG_USB_CDC_PHONET=m 77.1835 -CONFIG_USB_IPHETH=m 77.1836 -CONFIG_USB_SIERRA_NET=m 77.1837 -CONFIG_WAN=y 77.1838 -CONFIG_HOSTESS_SV11=m 77.1839 -CONFIG_COSA=m 77.1840 -CONFIG_LANMEDIA=m 77.1841 -CONFIG_SEALEVEL_4021=m 77.1842 -CONFIG_HDLC=m 77.1843 -CONFIG_HDLC_RAW=m 77.1844 -CONFIG_HDLC_RAW_ETH=m 77.1845 -CONFIG_HDLC_CISCO=m 77.1846 -CONFIG_HDLC_FR=m 77.1847 -CONFIG_HDLC_PPP=m 77.1848 - 77.1849 -# 77.1850 -# X.25/LAPB support is disabled 77.1851 -# 77.1852 -CONFIG_PCI200SYN=m 77.1853 -CONFIG_WANXL=m 77.1854 -CONFIG_PC300TOO=m 77.1855 -CONFIG_N2=m 77.1856 -CONFIG_C101=m 77.1857 -CONFIG_FARSYNC=m 77.1858 -CONFIG_DSCC4=m 77.1859 -CONFIG_DSCC4_PCISYNC=y 77.1860 -CONFIG_DSCC4_PCI_RST=y 77.1861 -CONFIG_DLCI=m 77.1862 -CONFIG_DLCI_MAX=8 77.1863 -CONFIG_SDLA=m 77.1864 -CONFIG_SBNI=m 77.1865 -CONFIG_SBNI_MULTILINE=y 77.1866 - 77.1867 -# 77.1868 -# CAIF transport drivers 77.1869 -# 77.1870 -CONFIG_FDDI=m 77.1871 -CONFIG_DEFXX=m 77.1872 -# CONFIG_DEFXX_MMIO is not set 77.1873 -CONFIG_SKFP=m 77.1874 -CONFIG_HIPPI=y 77.1875 -CONFIG_ROADRUNNER=m 77.1876 -CONFIG_ROADRUNNER_LARGE_RINGS=y 77.1877 -CONFIG_PLIP=m 77.1878 -CONFIG_PPP=m 77.1879 -CONFIG_PPP_MULTILINK=y 77.1880 -CONFIG_PPP_FILTER=y 77.1881 -CONFIG_PPP_ASYNC=m 77.1882 -CONFIG_PPP_SYNC_TTY=m 77.1883 -CONFIG_PPP_DEFLATE=m 77.1884 -CONFIG_PPP_BSDCOMP=m 77.1885 -CONFIG_PPP_MPPE=m 77.1886 -CONFIG_PPPOE=m 77.1887 -CONFIG_SLIP=m 77.1888 -CONFIG_SLIP_COMPRESSED=y 77.1889 -CONFIG_SLHC=m 77.1890 -CONFIG_SLIP_SMART=y 77.1891 -CONFIG_SLIP_MODE_SLIP6=y 77.1892 -CONFIG_NET_FC=y 77.1893 -# CONFIG_NETCONSOLE is not set 77.1894 -# CONFIG_NETPOLL is not set 77.1895 -# CONFIG_NET_POLL_CONTROLLER is not set 77.1896 -# CONFIG_VIRTIO_NET is not set 77.1897 -CONFIG_VMXNET3=m 77.1898 -CONFIG_ISDN=y 77.1899 -CONFIG_ISDN_I4L=m 77.1900 -# CONFIG_ISDN_PPP is not set 77.1901 -# CONFIG_ISDN_AUDIO is not set 77.1902 - 77.1903 -# 77.1904 -# ISDN feature submodules 77.1905 -# 77.1906 -# CONFIG_ISDN_DRV_LOOP is not set 77.1907 -# CONFIG_ISDN_DIVERSION is not set 77.1908 - 77.1909 -# 77.1910 -# ISDN4Linux hardware drivers 77.1911 -# 77.1912 - 77.1913 -# 77.1914 -# Passive cards 77.1915 -# 77.1916 -# CONFIG_ISDN_DRV_HISAX is not set 77.1917 - 77.1918 -# 77.1919 -# Active cards 77.1920 -# 77.1921 -# CONFIG_ISDN_DRV_ICN is not set 77.1922 -# CONFIG_ISDN_DRV_PCBIT is not set 77.1923 -# CONFIG_ISDN_DRV_SC is not set 77.1924 -# CONFIG_ISDN_DRV_ACT2000 is not set 77.1925 -CONFIG_ISDN_CAPI=m 77.1926 -CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y 77.1927 -CONFIG_CAPI_TRACE=y 77.1928 -CONFIG_ISDN_CAPI_MIDDLEWARE=y 77.1929 -CONFIG_ISDN_CAPI_CAPI20=m 77.1930 -CONFIG_ISDN_CAPI_CAPIFS_BOOL=y 77.1931 -CONFIG_ISDN_CAPI_CAPIFS=m 77.1932 -CONFIG_ISDN_CAPI_CAPIDRV=m 77.1933 - 77.1934 -# 77.1935 -# CAPI hardware drivers 77.1936 -# 77.1937 -CONFIG_CAPI_AVM=y 77.1938 -CONFIG_ISDN_DRV_AVMB1_B1ISA=m 77.1939 -CONFIG_ISDN_DRV_AVMB1_B1PCI=m 77.1940 -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y 77.1941 -CONFIG_ISDN_DRV_AVMB1_T1ISA=m 77.1942 -CONFIG_ISDN_DRV_AVMB1_T1PCI=m 77.1943 -CONFIG_ISDN_DRV_AVMB1_C4=m 77.1944 -CONFIG_CAPI_EICON=y 77.1945 -CONFIG_ISDN_DIVAS=m 77.1946 -CONFIG_ISDN_DIVAS_BRIPCI=y 77.1947 -CONFIG_ISDN_DIVAS_PRIPCI=y 77.1948 -CONFIG_ISDN_DIVAS_DIVACAPI=m 77.1949 -CONFIG_ISDN_DIVAS_USERIDI=m 77.1950 -CONFIG_ISDN_DIVAS_MAINT=m 77.1951 -CONFIG_ISDN_DRV_GIGASET=m 77.1952 -CONFIG_GIGASET_CAPI=y 77.1953 -# CONFIG_GIGASET_I4L is not set 77.1954 -# CONFIG_GIGASET_DUMMYLL is not set 77.1955 -CONFIG_GIGASET_BASE=m 77.1956 -CONFIG_GIGASET_M105=m 77.1957 -CONFIG_GIGASET_M101=m 77.1958 -# CONFIG_GIGASET_DEBUG is not set 77.1959 -CONFIG_HYSDN=m 77.1960 -CONFIG_HYSDN_CAPI=y 77.1961 -CONFIG_MISDN=m 77.1962 -CONFIG_MISDN_DSP=m 77.1963 -CONFIG_MISDN_L1OIP=m 77.1964 - 77.1965 -# 77.1966 -# mISDN hardware drivers 77.1967 -# 77.1968 -CONFIG_MISDN_HFCPCI=m 77.1969 -CONFIG_MISDN_HFCMULTI=m 77.1970 -CONFIG_MISDN_HFCUSB=m 77.1971 -CONFIG_MISDN_AVMFRITZ=m 77.1972 -CONFIG_MISDN_SPEEDFAX=m 77.1973 -CONFIG_MISDN_INFINEON=m 77.1974 -CONFIG_MISDN_W6692=m 77.1975 -CONFIG_MISDN_NETJET=m 77.1976 -CONFIG_MISDN_IPAC=m 77.1977 -CONFIG_MISDN_ISAR=m 77.1978 -CONFIG_ISDN_HDLC=m 77.1979 -CONFIG_PHONE=m 77.1980 -CONFIG_PHONE_IXJ=m 77.1981 - 77.1982 -# 77.1983 -# Input device support 77.1984 -# 77.1985 -CONFIG_INPUT=y 77.1986 -CONFIG_INPUT_FF_MEMLESS=m 77.1987 -CONFIG_INPUT_POLLDEV=m 77.1988 -CONFIG_INPUT_SPARSEKMAP=m 77.1989 - 77.1990 -# 77.1991 -# Userland interfaces 77.1992 -# 77.1993 -CONFIG_INPUT_MOUSEDEV=m 77.1994 -CONFIG_INPUT_MOUSEDEV_PSAUX=y 77.1995 -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 77.1996 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 77.1997 -CONFIG_INPUT_JOYDEV=m 77.1998 -CONFIG_INPUT_EVDEV=m 77.1999 -CONFIG_INPUT_EVBUG=m 77.2000 - 77.2001 -# 77.2002 -# Input Device Drivers 77.2003 -# 77.2004 -CONFIG_INPUT_KEYBOARD=y 77.2005 -CONFIG_KEYBOARD_ADP5588=m 77.2006 -CONFIG_KEYBOARD_ATKBD=y 77.2007 -# CONFIG_KEYBOARD_QT2160 is not set 77.2008 -CONFIG_KEYBOARD_LKKBD=m 77.2009 -CONFIG_KEYBOARD_GPIO=m 77.2010 -# CONFIG_KEYBOARD_GPIO_POLLED is not set 77.2011 -# CONFIG_KEYBOARD_TCA6416 is not set 77.2012 -CONFIG_KEYBOARD_MATRIX=m 77.2013 -CONFIG_KEYBOARD_LM8323=m 77.2014 -CONFIG_KEYBOARD_MAX7359=m 77.2015 -# CONFIG_KEYBOARD_MCS is not set 77.2016 -CONFIG_KEYBOARD_NEWTON=m 77.2017 -CONFIG_KEYBOARD_OPENCORES=m 77.2018 -CONFIG_KEYBOARD_STOWAWAY=m 77.2019 -CONFIG_KEYBOARD_SUNKBD=m 77.2020 -CONFIG_KEYBOARD_XTKBD=m 77.2021 -CONFIG_INPUT_MOUSE=y 77.2022 -CONFIG_MOUSE_PS2=m 77.2023 -CONFIG_MOUSE_PS2_ALPS=y 77.2024 -CONFIG_MOUSE_PS2_LOGIPS2PP=y 77.2025 -CONFIG_MOUSE_PS2_SYNAPTICS=y 77.2026 -CONFIG_MOUSE_PS2_TRACKPOINT=y 77.2027 -CONFIG_MOUSE_PS2_ELANTECH=y 77.2028 -CONFIG_MOUSE_PS2_SENTELIC=y 77.2029 -CONFIG_MOUSE_PS2_TOUCHKIT=y 77.2030 -CONFIG_MOUSE_SERIAL=m 77.2031 -CONFIG_MOUSE_APPLETOUCH=m 77.2032 -CONFIG_MOUSE_BCM5974=m 77.2033 -CONFIG_MOUSE_INPORT=m 77.2034 -CONFIG_MOUSE_ATIXL=y 77.2035 -CONFIG_MOUSE_LOGIBM=m 77.2036 -CONFIG_MOUSE_PC110PAD=m 77.2037 -CONFIG_MOUSE_VSXXXAA=m 77.2038 -CONFIG_MOUSE_GPIO=m 77.2039 -CONFIG_MOUSE_SYNAPTICS_I2C=m 77.2040 -CONFIG_INPUT_JOYSTICK=y 77.2041 -CONFIG_JOYSTICK_ANALOG=m 77.2042 -CONFIG_JOYSTICK_A3D=m 77.2043 -CONFIG_JOYSTICK_ADI=m 77.2044 -CONFIG_JOYSTICK_COBRA=m 77.2045 -CONFIG_JOYSTICK_GF2K=m 77.2046 -CONFIG_JOYSTICK_GRIP=m 77.2047 -CONFIG_JOYSTICK_GRIP_MP=m 77.2048 -CONFIG_JOYSTICK_GUILLEMOT=m 77.2049 -CONFIG_JOYSTICK_INTERACT=m 77.2050 -CONFIG_JOYSTICK_SIDEWINDER=m 77.2051 -CONFIG_JOYSTICK_TMDC=m 77.2052 -CONFIG_JOYSTICK_IFORCE=m 77.2053 -CONFIG_JOYSTICK_IFORCE_USB=y 77.2054 -CONFIG_JOYSTICK_IFORCE_232=y 77.2055 -CONFIG_JOYSTICK_WARRIOR=m 77.2056 -CONFIG_JOYSTICK_MAGELLAN=m 77.2057 -CONFIG_JOYSTICK_SPACEORB=m 77.2058 -CONFIG_JOYSTICK_SPACEBALL=m 77.2059 -CONFIG_JOYSTICK_STINGER=m 77.2060 -CONFIG_JOYSTICK_TWIDJOY=m 77.2061 -CONFIG_JOYSTICK_ZHENHUA=m 77.2062 -CONFIG_JOYSTICK_DB9=m 77.2063 -CONFIG_JOYSTICK_GAMECON=m 77.2064 -CONFIG_JOYSTICK_TURBOGRAFX=m 77.2065 -CONFIG_JOYSTICK_JOYDUMP=m 77.2066 -CONFIG_JOYSTICK_XPAD=m 77.2067 -CONFIG_JOYSTICK_XPAD_FF=y 77.2068 -CONFIG_JOYSTICK_XPAD_LEDS=y 77.2069 -CONFIG_INPUT_TABLET=y 77.2070 -CONFIG_TABLET_USB_ACECAD=m 77.2071 -CONFIG_TABLET_USB_AIPTEK=m 77.2072 -CONFIG_TABLET_USB_GTCO=m 77.2073 -# CONFIG_TABLET_USB_HANWANG is not set 77.2074 -CONFIG_TABLET_USB_KBTAB=m 77.2075 -CONFIG_TABLET_USB_WACOM=m 77.2076 -CONFIG_INPUT_TOUCHSCREEN=y 77.2077 -CONFIG_TOUCHSCREEN_ADS7846=m 77.2078 -CONFIG_TOUCHSCREEN_AD7877=m 77.2079 -CONFIG_TOUCHSCREEN_AD7879=m 77.2080 -CONFIG_TOUCHSCREEN_AD7879_I2C=m 77.2081 -# CONFIG_TOUCHSCREEN_AD7879_SPI is not set 77.2082 -# CONFIG_TOUCHSCREEN_BU21013 is not set 77.2083 -# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set 77.2084 -CONFIG_TOUCHSCREEN_DYNAPRO=m 77.2085 -# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set 77.2086 -CONFIG_TOUCHSCREEN_EETI=m 77.2087 -CONFIG_TOUCHSCREEN_FUJITSU=m 77.2088 -CONFIG_TOUCHSCREEN_GUNZE=m 77.2089 -CONFIG_TOUCHSCREEN_ELO=m 77.2090 -CONFIG_TOUCHSCREEN_WACOM_W8001=m 77.2091 -CONFIG_TOUCHSCREEN_MCS5000=m 77.2092 -CONFIG_TOUCHSCREEN_MTOUCH=m 77.2093 -CONFIG_TOUCHSCREEN_INEXIO=m 77.2094 -CONFIG_TOUCHSCREEN_MK712=m 77.2095 -CONFIG_TOUCHSCREEN_HTCPEN=m 77.2096 -CONFIG_TOUCHSCREEN_PENMOUNT=m 77.2097 -# CONFIG_TOUCHSCREEN_QT602240 is not set 77.2098 -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m 77.2099 -CONFIG_TOUCHSCREEN_TOUCHWIN=m 77.2100 -# CONFIG_TOUCHSCREEN_UCB1400 is not set 77.2101 -CONFIG_TOUCHSCREEN_WM97XX=m 77.2102 -CONFIG_TOUCHSCREEN_WM9705=y 77.2103 -CONFIG_TOUCHSCREEN_WM9712=y 77.2104 -CONFIG_TOUCHSCREEN_WM9713=y 77.2105 -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m 77.2106 -CONFIG_TOUCHSCREEN_USB_EGALAX=y 77.2107 -CONFIG_TOUCHSCREEN_USB_PANJIT=y 77.2108 -CONFIG_TOUCHSCREEN_USB_3M=y 77.2109 -CONFIG_TOUCHSCREEN_USB_ITM=y 77.2110 -CONFIG_TOUCHSCREEN_USB_ETURBO=y 77.2111 -CONFIG_TOUCHSCREEN_USB_GUNZE=y 77.2112 -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y 77.2113 -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y 77.2114 -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y 77.2115 -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y 77.2116 -CONFIG_TOUCHSCREEN_USB_GOTOP=y 77.2117 -CONFIG_TOUCHSCREEN_USB_JASTEC=y 77.2118 -CONFIG_TOUCHSCREEN_USB_E2I=y 77.2119 -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y 77.2120 -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y 77.2121 -CONFIG_TOUCHSCREEN_USB_NEXIO=y 77.2122 -CONFIG_TOUCHSCREEN_TOUCHIT213=m 77.2123 -CONFIG_TOUCHSCREEN_TSC2007=m 77.2124 -CONFIG_TOUCHSCREEN_PCAP=m 77.2125 -# CONFIG_TOUCHSCREEN_TPS6507X is not set 77.2126 -CONFIG_INPUT_MISC=y 77.2127 -# CONFIG_INPUT_AD714X is not set 77.2128 -CONFIG_INPUT_PCSPKR=m 77.2129 -CONFIG_INPUT_APANEL=m 77.2130 -CONFIG_INPUT_WISTRON_BTNS=m 77.2131 -CONFIG_INPUT_ATI_REMOTE=m 77.2132 -CONFIG_INPUT_ATI_REMOTE2=m 77.2133 -CONFIG_INPUT_KEYSPAN_REMOTE=m 77.2134 -CONFIG_INPUT_POWERMATE=m 77.2135 -CONFIG_INPUT_YEALINK=m 77.2136 -CONFIG_INPUT_CM109=m 77.2137 -CONFIG_INPUT_UINPUT=m 77.2138 -CONFIG_INPUT_WINBOND_CIR=m 77.2139 -CONFIG_INPUT_PCF50633_PMU=m 77.2140 -# CONFIG_INPUT_PCF8574 is not set 77.2141 -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m 77.2142 -CONFIG_INPUT_PCAP=m 77.2143 -# CONFIG_INPUT_ADXL34X is not set 77.2144 - 77.2145 -# 77.2146 -# Hardware I/O ports 77.2147 -# 77.2148 -CONFIG_SERIO=y 77.2149 -CONFIG_SERIO_I8042=y 77.2150 -CONFIG_SERIO_SERPORT=m 77.2151 -CONFIG_SERIO_CT82C710=m 77.2152 -CONFIG_SERIO_PARKBD=m 77.2153 -CONFIG_SERIO_PCIPS2=m 77.2154 -CONFIG_SERIO_LIBPS2=y 77.2155 -CONFIG_SERIO_RAW=m 77.2156 -CONFIG_SERIO_ALTERA_PS2=m 77.2157 -# CONFIG_SERIO_PS2MULT is not set 77.2158 -CONFIG_GAMEPORT=m 77.2159 -CONFIG_GAMEPORT_NS558=m 77.2160 -CONFIG_GAMEPORT_L4=m 77.2161 -CONFIG_GAMEPORT_EMU10K1=m 77.2162 -CONFIG_GAMEPORT_FM801=m 77.2163 - 77.2164 -# 77.2165 -# Character devices 77.2166 -# 77.2167 -CONFIG_VT=y 77.2168 -CONFIG_CONSOLE_TRANSLATIONS=y 77.2169 -CONFIG_VT_CONSOLE=y 77.2170 -CONFIG_HW_CONSOLE=y 77.2171 -# CONFIG_VT_HW_CONSOLE_BINDING is not set 77.2172 -# CONFIG_DEVKMEM is not set 77.2173 -# CONFIG_SERIAL_NONSTANDARD is not set 77.2174 -# CONFIG_N_GSM is not set 77.2175 -CONFIG_NOZOMI=m 77.2176 - 77.2177 -# 77.2178 -# Serial drivers 77.2179 -# 77.2180 -CONFIG_SERIAL_8250=m 77.2181 -CONFIG_FIX_EARLYCON_MEM=y 77.2182 -CONFIG_SERIAL_8250_PCI=m 77.2183 -CONFIG_SERIAL_8250_PNP=m 77.2184 -CONFIG_SERIAL_8250_NR_UARTS=2 77.2185 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 77.2186 -CONFIG_SERIAL_8250_EXTENDED=y 77.2187 -CONFIG_SERIAL_8250_MANY_PORTS=y 77.2188 -CONFIG_SERIAL_8250_FOURPORT=m 77.2189 -CONFIG_SERIAL_8250_ACCENT=m 77.2190 -CONFIG_SERIAL_8250_BOCA=m 77.2191 -CONFIG_SERIAL_8250_EXAR_ST16C554=m 77.2192 -CONFIG_SERIAL_8250_HUB6=m 77.2193 -CONFIG_SERIAL_8250_SHARE_IRQ=y 77.2194 -CONFIG_SERIAL_8250_DETECT_IRQ=y 77.2195 -CONFIG_SERIAL_8250_RSA=y 77.2196 - 77.2197 -# 77.2198 -# Non-8250 serial port support 77.2199 -# 77.2200 -CONFIG_SERIAL_MAX3100=m 77.2201 -# CONFIG_SERIAL_MAX3107 is not set 77.2202 -# CONFIG_SERIAL_MRST_MAX3110 is not set 77.2203 -# CONFIG_SERIAL_MFD_HSU is not set 77.2204 -CONFIG_SERIAL_UARTLITE=m 77.2205 -CONFIG_SERIAL_CORE=m 77.2206 -CONFIG_SERIAL_JSM=m 77.2207 -CONFIG_SERIAL_TIMBERDALE=m 77.2208 -# CONFIG_SERIAL_ALTERA_JTAGUART is not set 77.2209 -# CONFIG_SERIAL_ALTERA_UART is not set 77.2210 -CONFIG_UNIX98_PTYS=y 77.2211 -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set 77.2212 -# CONFIG_LEGACY_PTYS is not set 77.2213 -# CONFIG_TTY_PRINTK is not set 77.2214 -CONFIG_PRINTER=m 77.2215 -CONFIG_LP_CONSOLE=y 77.2216 -CONFIG_PPDEV=m 77.2217 -CONFIG_HVC_DRIVER=y 77.2218 -# CONFIG_VIRTIO_CONSOLE is not set 77.2219 -CONFIG_IPMI_HANDLER=m 77.2220 -# CONFIG_IPMI_PANIC_EVENT is not set 77.2221 -CONFIG_IPMI_DEVICE_INTERFACE=m 77.2222 -CONFIG_IPMI_SI=m 77.2223 -CONFIG_IPMI_WATCHDOG=m 77.2224 -CONFIG_IPMI_POWEROFF=m 77.2225 -CONFIG_HW_RANDOM=m 77.2226 -CONFIG_HW_RANDOM_TIMERIOMEM=m 77.2227 -CONFIG_HW_RANDOM_INTEL=m 77.2228 -CONFIG_HW_RANDOM_AMD=m 77.2229 -CONFIG_HW_RANDOM_GEODE=m 77.2230 -CONFIG_HW_RANDOM_VIA=m 77.2231 -# CONFIG_HW_RANDOM_VIRTIO is not set 77.2232 -CONFIG_NVRAM=m 77.2233 -CONFIG_DTLK=m 77.2234 -CONFIG_R3964=m 77.2235 -CONFIG_APPLICOM=m 77.2236 -CONFIG_SONYPI=m 77.2237 -CONFIG_MWAVE=m 77.2238 -CONFIG_PC8736x_GPIO=m 77.2239 -CONFIG_NSC_GPIO=m 77.2240 -CONFIG_CS5535_GPIO=m 77.2241 -CONFIG_RAW_DRIVER=m 77.2242 -CONFIG_MAX_RAW_DEVS=256 77.2243 -CONFIG_HANGCHECK_TIMER=m 77.2244 -CONFIG_TCG_TPM=m 77.2245 -CONFIG_TCG_TIS=m 77.2246 -CONFIG_TCG_NSC=m 77.2247 -CONFIG_TCG_ATMEL=m 77.2248 -CONFIG_TCG_INFINEON=m 77.2249 -CONFIG_TELCLOCK=m 77.2250 -CONFIG_DEVPORT=y 77.2251 -# CONFIG_RAMOOPS is not set 77.2252 -CONFIG_I2C=m 77.2253 -CONFIG_I2C_BOARDINFO=y 77.2254 -CONFIG_I2C_COMPAT=y 77.2255 -CONFIG_I2C_CHARDEV=m 77.2256 -# CONFIG_I2C_MUX is not set 77.2257 -CONFIG_I2C_HELPER_AUTO=y 77.2258 -CONFIG_I2C_SMBUS=m 77.2259 -CONFIG_I2C_ALGOBIT=m 77.2260 -CONFIG_I2C_ALGOPCF=m 77.2261 -CONFIG_I2C_ALGOPCA=m 77.2262 - 77.2263 -# 77.2264 -# I2C Hardware Bus support 77.2265 -# 77.2266 - 77.2267 -# 77.2268 -# PC SMBus host controller drivers 77.2269 -# 77.2270 -CONFIG_I2C_ALI1535=m 77.2271 -CONFIG_I2C_ALI1563=m 77.2272 -CONFIG_I2C_ALI15X3=m 77.2273 -CONFIG_I2C_AMD756=m 77.2274 -CONFIG_I2C_AMD756_S4882=m 77.2275 -CONFIG_I2C_AMD8111=m 77.2276 -CONFIG_I2C_I801=m 77.2277 -CONFIG_I2C_ISCH=m 77.2278 -CONFIG_I2C_PIIX4=m 77.2279 -CONFIG_I2C_NFORCE2=m 77.2280 -CONFIG_I2C_NFORCE2_S4985=m 77.2281 -CONFIG_I2C_SIS5595=m 77.2282 -CONFIG_I2C_SIS630=m 77.2283 -CONFIG_I2C_SIS96X=m 77.2284 -CONFIG_I2C_VIA=m 77.2285 -CONFIG_I2C_VIAPRO=m 77.2286 - 77.2287 -# 77.2288 -# I2C system bus drivers (mostly embedded / system-on-chip) 77.2289 -# 77.2290 -# CONFIG_I2C_GPIO is not set 77.2291 -# CONFIG_I2C_INTEL_MID is not set 77.2292 -CONFIG_I2C_OCORES=m 77.2293 -CONFIG_I2C_PCA_PLATFORM=m 77.2294 -CONFIG_I2C_SIMTEC=m 77.2295 -CONFIG_I2C_XILINX=m 77.2296 - 77.2297 -# 77.2298 -# External I2C/SMBus adapter drivers 77.2299 -# 77.2300 -CONFIG_I2C_PARPORT=m 77.2301 -# CONFIG_I2C_PARPORT_LIGHT is not set 77.2302 -CONFIG_I2C_TAOS_EVM=m 77.2303 -# CONFIG_I2C_TINY_USB is not set 77.2304 - 77.2305 -# 77.2306 -# Other I2C/SMBus bus drivers 77.2307 -# 77.2308 -CONFIG_I2C_ELEKTOR=m 77.2309 -CONFIG_I2C_PCA_ISA=m 77.2310 -CONFIG_I2C_STUB=m 77.2311 -CONFIG_SCx200_ACB=m 77.2312 -# CONFIG_I2C_DEBUG_CORE is not set 77.2313 -# CONFIG_I2C_DEBUG_ALGO is not set 77.2314 -# CONFIG_I2C_DEBUG_BUS is not set 77.2315 -CONFIG_SPI=y 77.2316 -CONFIG_SPI_MASTER=y 77.2317 - 77.2318 -# 77.2319 -# SPI Master Controller Drivers 77.2320 -# 77.2321 -CONFIG_SPI_BITBANG=m 77.2322 -CONFIG_SPI_BUTTERFLY=m 77.2323 -# CONFIG_SPI_GPIO is not set 77.2324 -CONFIG_SPI_LM70_LLP=m 77.2325 -# CONFIG_SPI_TOPCLIFF_PCH is not set 77.2326 -CONFIG_SPI_XILINX=m 77.2327 -CONFIG_SPI_XILINX_PLTFM=m 77.2328 -CONFIG_SPI_DESIGNWARE=m 77.2329 -CONFIG_SPI_DW_PCI=m 77.2330 - 77.2331 -# 77.2332 -# SPI Protocol Masters 77.2333 -# 77.2334 -CONFIG_SPI_SPIDEV=m 77.2335 -# CONFIG_SPI_TLE62X0 is not set 77.2336 - 77.2337 -# 77.2338 -# PPS support 77.2339 -# 77.2340 -CONFIG_PPS=m 77.2341 -# CONFIG_PPS_DEBUG is not set 77.2342 - 77.2343 -# 77.2344 -# PPS clients support 77.2345 -# 77.2346 -CONFIG_PPS_CLIENT_KTIMER=m 77.2347 -CONFIG_PPS_CLIENT_LDISC=m 77.2348 -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y 77.2349 -CONFIG_GPIOLIB=y 77.2350 -# CONFIG_GPIO_SYSFS is not set 77.2351 -CONFIG_GPIO_MAX730X=m 77.2352 - 77.2353 -# 77.2354 -# Memory mapped GPIO expanders: 77.2355 -# 77.2356 -# CONFIG_GPIO_BASIC_MMIO is not set 77.2357 -CONFIG_GPIO_IT8761E=m 77.2358 -CONFIG_GPIO_SCH=m 77.2359 -# CONFIG_GPIO_VX855 is not set 77.2360 - 77.2361 -# 77.2362 -# I2C GPIO expanders: 77.2363 -# 77.2364 -CONFIG_GPIO_MAX7300=m 77.2365 -CONFIG_GPIO_MAX732X=m 77.2366 -CONFIG_GPIO_PCA953X=m 77.2367 -CONFIG_GPIO_PCF857X=m 77.2368 -CONFIG_GPIO_ADP5588=m 77.2369 - 77.2370 -# 77.2371 -# PCI GPIO expanders: 77.2372 -# 77.2373 -CONFIG_GPIO_CS5535=m 77.2374 -CONFIG_GPIO_LANGWELL=y 77.2375 -# CONFIG_GPIO_PCH is not set 77.2376 -CONFIG_GPIO_TIMBERDALE=y 77.2377 -# CONFIG_GPIO_RDC321X is not set 77.2378 - 77.2379 -# 77.2380 -# SPI GPIO expanders: 77.2381 -# 77.2382 -CONFIG_GPIO_MAX7301=m 77.2383 -CONFIG_GPIO_MCP23S08=m 77.2384 -CONFIG_GPIO_MC33880=m 77.2385 -# CONFIG_GPIO_74X164 is not set 77.2386 - 77.2387 -# 77.2388 -# AC97 GPIO expanders: 77.2389 -# 77.2390 -# CONFIG_GPIO_UCB1400 is not set 77.2391 - 77.2392 -# 77.2393 -# MODULbus GPIO expanders: 77.2394 -# 77.2395 -CONFIG_W1=m 77.2396 -CONFIG_W1_CON=y 77.2397 - 77.2398 -# 77.2399 -# 1-wire Bus Masters 77.2400 -# 77.2401 -CONFIG_W1_MASTER_MATROX=m 77.2402 -CONFIG_W1_MASTER_DS2490=m 77.2403 -CONFIG_W1_MASTER_DS2482=m 77.2404 -CONFIG_W1_MASTER_GPIO=m 77.2405 - 77.2406 -# 77.2407 -# 1-wire Slaves 77.2408 -# 77.2409 -CONFIG_W1_SLAVE_THERM=m 77.2410 -CONFIG_W1_SLAVE_SMEM=m 77.2411 -CONFIG_W1_SLAVE_DS2431=m 77.2412 -CONFIG_W1_SLAVE_DS2433=m 77.2413 -CONFIG_W1_SLAVE_DS2433_CRC=y 77.2414 -CONFIG_W1_SLAVE_DS2760=m 77.2415 -CONFIG_W1_SLAVE_BQ27000=m 77.2416 -CONFIG_POWER_SUPPLY=m 77.2417 -# CONFIG_POWER_SUPPLY_DEBUG is not set 77.2418 -CONFIG_PDA_POWER=m 77.2419 -# CONFIG_TEST_POWER is not set 77.2420 -CONFIG_BATTERY_DS2760=m 77.2421 -CONFIG_BATTERY_DS2782=m 77.2422 -# CONFIG_BATTERY_BQ20Z75 is not set 77.2423 -CONFIG_BATTERY_BQ27x00=m 77.2424 -CONFIG_BATTERY_MAX17040=m 77.2425 -CONFIG_CHARGER_PCF50633=m 77.2426 -# CONFIG_CHARGER_ISP1704 is not set 77.2427 -CONFIG_HWMON=m 77.2428 -CONFIG_HWMON_VID=m 77.2429 -# CONFIG_HWMON_DEBUG_CHIP is not set 77.2430 - 77.2431 -# 77.2432 -# Native drivers 77.2433 -# 77.2434 -CONFIG_SENSORS_ABITUGURU=m 77.2435 -CONFIG_SENSORS_ABITUGURU3=m 77.2436 -CONFIG_SENSORS_AD7414=m 77.2437 -CONFIG_SENSORS_AD7418=m 77.2438 -CONFIG_SENSORS_ADCXX=m 77.2439 -CONFIG_SENSORS_ADM1021=m 77.2440 -CONFIG_SENSORS_ADM1025=m 77.2441 -CONFIG_SENSORS_ADM1026=m 77.2442 -CONFIG_SENSORS_ADM1029=m 77.2443 -CONFIG_SENSORS_ADM1031=m 77.2444 -CONFIG_SENSORS_ADM9240=m 77.2445 -CONFIG_SENSORS_ADT7411=m 77.2446 -CONFIG_SENSORS_ADT7462=m 77.2447 -CONFIG_SENSORS_ADT7470=m 77.2448 -CONFIG_SENSORS_ADT7475=m 77.2449 -CONFIG_SENSORS_ASC7621=m 77.2450 -CONFIG_SENSORS_K8TEMP=m 77.2451 -CONFIG_SENSORS_K10TEMP=m 77.2452 -CONFIG_SENSORS_ASB100=m 77.2453 -CONFIG_SENSORS_ATXP1=m 77.2454 -CONFIG_SENSORS_DS1621=m 77.2455 -CONFIG_SENSORS_I5K_AMB=m 77.2456 -CONFIG_SENSORS_F71805F=m 77.2457 -CONFIG_SENSORS_F71882FG=m 77.2458 -CONFIG_SENSORS_F75375S=m 77.2459 -CONFIG_SENSORS_FSCHMD=m 77.2460 -CONFIG_SENSORS_G760A=m 77.2461 -CONFIG_SENSORS_GL518SM=m 77.2462 -CONFIG_SENSORS_GL520SM=m 77.2463 -# CONFIG_SENSORS_GPIO_FAN is not set 77.2464 -CONFIG_SENSORS_CORETEMP=m 77.2465 -# CONFIG_SENSORS_PKGTEMP is not set 77.2466 -CONFIG_SENSORS_IBMAEM=m 77.2467 -CONFIG_SENSORS_IBMPEX=m 77.2468 -CONFIG_SENSORS_IT87=m 77.2469 -# CONFIG_SENSORS_JC42 is not set 77.2470 -CONFIG_SENSORS_LM63=m 77.2471 -CONFIG_SENSORS_LM70=m 77.2472 -CONFIG_SENSORS_LM73=m 77.2473 -CONFIG_SENSORS_LM75=m 77.2474 -CONFIG_SENSORS_LM77=m 77.2475 -CONFIG_SENSORS_LM78=m 77.2476 -CONFIG_SENSORS_LM80=m 77.2477 -CONFIG_SENSORS_LM83=m 77.2478 -CONFIG_SENSORS_LM85=m 77.2479 -CONFIG_SENSORS_LM87=m 77.2480 -CONFIG_SENSORS_LM90=m 77.2481 -CONFIG_SENSORS_LM92=m 77.2482 -CONFIG_SENSORS_LM93=m 77.2483 -CONFIG_SENSORS_LTC4215=m 77.2484 -CONFIG_SENSORS_LTC4245=m 77.2485 -# CONFIG_SENSORS_LTC4261 is not set 77.2486 -CONFIG_SENSORS_LM95241=m 77.2487 -CONFIG_SENSORS_MAX1111=m 77.2488 -CONFIG_SENSORS_MAX1619=m 77.2489 -CONFIG_SENSORS_MAX6650=m 77.2490 -CONFIG_SENSORS_PC87360=m 77.2491 -CONFIG_SENSORS_PC87427=m 77.2492 -CONFIG_SENSORS_PCF8591=m 77.2493 -CONFIG_SENSORS_SHT15=m 77.2494 -CONFIG_SENSORS_SIS5595=m 77.2495 -# CONFIG_SENSORS_SMM665 is not set 77.2496 -CONFIG_SENSORS_DME1737=m 77.2497 -# CONFIG_SENSORS_EMC1403 is not set 77.2498 -# CONFIG_SENSORS_EMC2103 is not set 77.2499 -CONFIG_SENSORS_SMSC47M1=m 77.2500 -CONFIG_SENSORS_SMSC47M192=m 77.2501 -CONFIG_SENSORS_SMSC47B397=m 77.2502 -CONFIG_SENSORS_ADS7828=m 77.2503 -# CONFIG_SENSORS_ADS7871 is not set 77.2504 -CONFIG_SENSORS_AMC6821=m 77.2505 -CONFIG_SENSORS_THMC50=m 77.2506 -# CONFIG_SENSORS_TMP102 is not set 77.2507 -CONFIG_SENSORS_TMP401=m 77.2508 -CONFIG_SENSORS_TMP421=m 77.2509 -CONFIG_SENSORS_VIA_CPUTEMP=m 77.2510 -CONFIG_SENSORS_VIA686A=m 77.2511 -CONFIG_SENSORS_VT1211=m 77.2512 -CONFIG_SENSORS_VT8231=m 77.2513 -CONFIG_SENSORS_W83781D=m 77.2514 -CONFIG_SENSORS_W83791D=m 77.2515 -CONFIG_SENSORS_W83792D=m 77.2516 -CONFIG_SENSORS_W83793=m 77.2517 -# CONFIG_SENSORS_W83795 is not set 77.2518 -CONFIG_SENSORS_W83L785TS=m 77.2519 -CONFIG_SENSORS_W83L786NG=m 77.2520 -CONFIG_SENSORS_W83627HF=m 77.2521 -CONFIG_SENSORS_W83627EHF=m 77.2522 -CONFIG_SENSORS_LIS3_SPI=m 77.2523 -CONFIG_SENSORS_LIS3_I2C=m 77.2524 -CONFIG_SENSORS_APPLESMC=m 77.2525 -CONFIG_THERMAL=m 77.2526 -CONFIG_THERMAL_HWMON=y 77.2527 -CONFIG_WATCHDOG=y 77.2528 -# CONFIG_WATCHDOG_NOWAYOUT is not set 77.2529 - 77.2530 -# 77.2531 -# Watchdog Device Drivers 77.2532 -# 77.2533 -CONFIG_SOFT_WATCHDOG=m 77.2534 -CONFIG_ACQUIRE_WDT=m 77.2535 -CONFIG_ADVANTECH_WDT=m 77.2536 -CONFIG_ALIM1535_WDT=m 77.2537 -CONFIG_ALIM7101_WDT=m 77.2538 -# CONFIG_F71808E_WDT is not set 77.2539 -CONFIG_GEODE_WDT=m 77.2540 -CONFIG_SC520_WDT=m 77.2541 -CONFIG_SBC_FITPC2_WATCHDOG=m 77.2542 -CONFIG_EUROTECH_WDT=m 77.2543 -CONFIG_IB700_WDT=m 77.2544 -CONFIG_IBMASR=m 77.2545 -CONFIG_WAFER_WDT=m 77.2546 -CONFIG_I6300ESB_WDT=m 77.2547 -CONFIG_ITCO_WDT=m 77.2548 -CONFIG_ITCO_VENDOR_SUPPORT=y 77.2549 -CONFIG_IT8712F_WDT=m 77.2550 -CONFIG_IT87_WDT=m 77.2551 -CONFIG_HP_WATCHDOG=m 77.2552 -# CONFIG_HPWDT_NMI_DECODING is not set 77.2553 -CONFIG_SC1200_WDT=m 77.2554 -CONFIG_PC87413_WDT=m 77.2555 -CONFIG_60XX_WDT=m 77.2556 -CONFIG_SBC8360_WDT=m 77.2557 -CONFIG_SBC7240_WDT=m 77.2558 -CONFIG_CPU5_WDT=m 77.2559 -CONFIG_SMSC_SCH311X_WDT=m 77.2560 -CONFIG_SMSC37B787_WDT=m 77.2561 -CONFIG_W83627HF_WDT=m 77.2562 -CONFIG_W83697HF_WDT=m 77.2563 -CONFIG_W83697UG_WDT=m 77.2564 -CONFIG_W83877F_WDT=m 77.2565 -CONFIG_W83977F_WDT=m 77.2566 -CONFIG_MACHZ_WDT=m 77.2567 -CONFIG_SBC_EPX_C3_WATCHDOG=m 77.2568 - 77.2569 -# 77.2570 -# ISA-based Watchdog Cards 77.2571 -# 77.2572 -CONFIG_PCWATCHDOG=m 77.2573 -CONFIG_MIXCOMWD=m 77.2574 -CONFIG_WDT=m 77.2575 - 77.2576 -# 77.2577 -# PCI-based Watchdog Cards 77.2578 -# 77.2579 -CONFIG_PCIPCWATCHDOG=m 77.2580 -CONFIG_WDTPCI=m 77.2581 - 77.2582 -# 77.2583 -# USB-based Watchdog Cards 77.2584 -# 77.2585 -CONFIG_USBPCWATCHDOG=m 77.2586 -CONFIG_SSB_POSSIBLE=y 77.2587 - 77.2588 -# 77.2589 -# Sonics Silicon Backplane 77.2590 -# 77.2591 -CONFIG_SSB=m 77.2592 -CONFIG_SSB_SPROM=y 77.2593 -CONFIG_SSB_BLOCKIO=y 77.2594 -CONFIG_SSB_PCIHOST_POSSIBLE=y 77.2595 -CONFIG_SSB_PCIHOST=y 77.2596 -CONFIG_SSB_B43_PCI_BRIDGE=y 77.2597 -CONFIG_SSB_SDIOHOST_POSSIBLE=y 77.2598 -# CONFIG_SSB_SDIOHOST is not set 77.2599 -# CONFIG_SSB_SILENT is not set 77.2600 -# CONFIG_SSB_DEBUG is not set 77.2601 -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y 77.2602 -CONFIG_SSB_DRIVER_PCICORE=y 77.2603 -CONFIG_MFD_SUPPORT=y 77.2604 -CONFIG_MFD_CORE=m 77.2605 -CONFIG_MFD_SM501=m 77.2606 -CONFIG_MFD_SM501_GPIO=y 77.2607 -CONFIG_HTC_PASIC3=m 77.2608 -CONFIG_UCB1400_CORE=m 77.2609 -CONFIG_TPS65010=m 77.2610 -# CONFIG_TPS6507X is not set 77.2611 -# CONFIG_MFD_TMIO is not set 77.2612 -CONFIG_MFD_WM8400=m 77.2613 -# CONFIG_MFD_WM831X_SPI is not set 77.2614 -CONFIG_MFD_PCF50633=m 77.2615 -# CONFIG_MFD_MC13XXX is not set 77.2616 -CONFIG_PCF50633_ADC=m 77.2617 -CONFIG_PCF50633_GPIO=m 77.2618 -# CONFIG_ABX500_CORE is not set 77.2619 -CONFIG_EZX_PCAP=y 77.2620 -CONFIG_MFD_TIMBERDALE=m 77.2621 -CONFIG_LPC_SCH=m 77.2622 -# CONFIG_MFD_RDC321X is not set 77.2623 -# CONFIG_MFD_JANZ_CMODIO is not set 77.2624 -# CONFIG_MFD_VX855 is not set 77.2625 -CONFIG_REGULATOR=y 77.2626 -# CONFIG_REGULATOR_DEBUG is not set 77.2627 -# CONFIG_REGULATOR_DUMMY is not set 77.2628 -CONFIG_REGULATOR_FIXED_VOLTAGE=m 77.2629 -CONFIG_REGULATOR_VIRTUAL_CONSUMER=m 77.2630 -CONFIG_REGULATOR_USERSPACE_CONSUMER=m 77.2631 -CONFIG_REGULATOR_BQ24022=m 77.2632 -CONFIG_REGULATOR_MAX1586=m 77.2633 -CONFIG_REGULATOR_MAX8649=m 77.2634 -CONFIG_REGULATOR_MAX8660=m 77.2635 -# CONFIG_REGULATOR_MAX8952 is not set 77.2636 -CONFIG_REGULATOR_WM8400=m 77.2637 -CONFIG_REGULATOR_PCF50633=m 77.2638 -CONFIG_REGULATOR_LP3971=m 77.2639 -# CONFIG_REGULATOR_LP3972 is not set 77.2640 -CONFIG_REGULATOR_PCAP=m 77.2641 -CONFIG_REGULATOR_TPS65023=m 77.2642 -CONFIG_REGULATOR_TPS6507X=m 77.2643 -# CONFIG_REGULATOR_ISL6271A is not set 77.2644 -# CONFIG_REGULATOR_AD5398 is not set 77.2645 -CONFIG_MEDIA_SUPPORT=m 77.2646 - 77.2647 -# 77.2648 -# Multimedia core support 77.2649 -# 77.2650 -CONFIG_VIDEO_DEV=m 77.2651 -CONFIG_VIDEO_V4L2_COMMON=m 77.2652 -CONFIG_VIDEO_ALLOW_V4L1=y 77.2653 -CONFIG_VIDEO_V4L1_COMPAT=y 77.2654 -CONFIG_DVB_CORE=m 77.2655 -CONFIG_VIDEO_MEDIA=m 77.2656 - 77.2657 -# 77.2658 -# Multimedia drivers 77.2659 -# 77.2660 -CONFIG_VIDEO_SAA7146=m 77.2661 -CONFIG_VIDEO_SAA7146_VV=m 77.2662 -CONFIG_IR_CORE=m 77.2663 -CONFIG_VIDEO_IR=m 77.2664 -CONFIG_LIRC=m 77.2665 -CONFIG_RC_MAP=m 77.2666 -CONFIG_IR_NEC_DECODER=m 77.2667 -CONFIG_IR_RC5_DECODER=m 77.2668 -CONFIG_IR_RC6_DECODER=m 77.2669 -CONFIG_IR_JVC_DECODER=m 77.2670 -CONFIG_IR_SONY_DECODER=m 77.2671 -CONFIG_IR_RC5_SZ_DECODER=m 77.2672 -CONFIG_IR_LIRC_CODEC=m 77.2673 -# CONFIG_IR_ENE is not set 77.2674 -# CONFIG_IR_IMON is not set 77.2675 -# CONFIG_IR_MCEUSB is not set 77.2676 -# CONFIG_IR_NUVOTON is not set 77.2677 -# CONFIG_IR_STREAMZAP is not set 77.2678 -CONFIG_MEDIA_ATTACH=y 77.2679 -CONFIG_MEDIA_TUNER=m 77.2680 -CONFIG_MEDIA_TUNER_CUSTOMISE=y 77.2681 - 77.2682 -# 77.2683 -# Customize TV tuners 77.2684 -# 77.2685 -CONFIG_MEDIA_TUNER_SIMPLE=m 77.2686 -CONFIG_MEDIA_TUNER_TDA8290=m 77.2687 -CONFIG_MEDIA_TUNER_TDA827X=m 77.2688 -CONFIG_MEDIA_TUNER_TDA18271=m 77.2689 -CONFIG_MEDIA_TUNER_TDA9887=m 77.2690 -CONFIG_MEDIA_TUNER_TEA5761=m 77.2691 -CONFIG_MEDIA_TUNER_TEA5767=m 77.2692 -CONFIG_MEDIA_TUNER_MT20XX=m 77.2693 -CONFIG_MEDIA_TUNER_MT2060=m 77.2694 -CONFIG_MEDIA_TUNER_MT2266=m 77.2695 -CONFIG_MEDIA_TUNER_MT2131=m 77.2696 -CONFIG_MEDIA_TUNER_QT1010=m 77.2697 -CONFIG_MEDIA_TUNER_XC2028=m 77.2698 -CONFIG_MEDIA_TUNER_XC5000=m 77.2699 -CONFIG_MEDIA_TUNER_MXL5005S=m 77.2700 -CONFIG_MEDIA_TUNER_MXL5007T=m 77.2701 -CONFIG_MEDIA_TUNER_MC44S803=m 77.2702 -CONFIG_MEDIA_TUNER_MAX2165=m 77.2703 -CONFIG_MEDIA_TUNER_TDA18218=m 77.2704 -CONFIG_VIDEO_V4L2=m 77.2705 -CONFIG_VIDEO_V4L1=m 77.2706 -CONFIG_VIDEOBUF_GEN=m 77.2707 -CONFIG_VIDEOBUF_DMA_SG=m 77.2708 -CONFIG_VIDEOBUF_VMALLOC=m 77.2709 -CONFIG_VIDEOBUF_DVB=m 77.2710 -CONFIG_VIDEO_BTCX=m 77.2711 -CONFIG_VIDEO_TVEEPROM=m 77.2712 -CONFIG_VIDEO_TUNER=m 77.2713 -CONFIG_VIDEO_CAPTURE_DRIVERS=y 77.2714 -# CONFIG_VIDEO_ADV_DEBUG is not set 77.2715 -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set 77.2716 -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y 77.2717 -CONFIG_VIDEO_IR_I2C=m 77.2718 - 77.2719 -# 77.2720 -# Audio decoders 77.2721 -# 77.2722 -CONFIG_VIDEO_TVAUDIO=m 77.2723 -CONFIG_VIDEO_TDA7432=m 77.2724 -CONFIG_VIDEO_TDA9840=m 77.2725 -CONFIG_VIDEO_TEA6415C=m 77.2726 -CONFIG_VIDEO_TEA6420=m 77.2727 -CONFIG_VIDEO_MSP3400=m 77.2728 -CONFIG_VIDEO_CS5345=m 77.2729 -CONFIG_VIDEO_CS53L32A=m 77.2730 -CONFIG_VIDEO_M52790=m 77.2731 -CONFIG_VIDEO_WM8775=m 77.2732 -CONFIG_VIDEO_WM8739=m 77.2733 -CONFIG_VIDEO_VP27SMPX=m 77.2734 - 77.2735 -# 77.2736 -# RDS decoders 77.2737 -# 77.2738 -CONFIG_VIDEO_SAA6588=m 77.2739 - 77.2740 -# 77.2741 -# Video decoders 77.2742 -# 77.2743 -CONFIG_VIDEO_BT819=m 77.2744 -CONFIG_VIDEO_BT856=m 77.2745 -CONFIG_VIDEO_BT866=m 77.2746 -CONFIG_VIDEO_KS0127=m 77.2747 -CONFIG_VIDEO_OV7670=m 77.2748 -CONFIG_VIDEO_SAA7110=m 77.2749 -CONFIG_VIDEO_SAA711X=m 77.2750 -CONFIG_VIDEO_SAA717X=m 77.2751 -CONFIG_VIDEO_VPX3220=m 77.2752 - 77.2753 -# 77.2754 -# Video and audio decoders 77.2755 -# 77.2756 -CONFIG_VIDEO_CX25840=m 77.2757 - 77.2758 -# 77.2759 -# MPEG video encoders 77.2760 -# 77.2761 -CONFIG_VIDEO_CX2341X=m 77.2762 - 77.2763 -# 77.2764 -# Video encoders 77.2765 -# 77.2766 -CONFIG_VIDEO_SAA7127=m 77.2767 -CONFIG_VIDEO_SAA7185=m 77.2768 -CONFIG_VIDEO_ADV7170=m 77.2769 -CONFIG_VIDEO_ADV7175=m 77.2770 - 77.2771 -# 77.2772 -# Video improvement chips 77.2773 -# 77.2774 -CONFIG_VIDEO_UPD64031A=m 77.2775 -CONFIG_VIDEO_UPD64083=m 77.2776 -CONFIG_VIDEO_VIVI=m 77.2777 -CONFIG_VIDEO_BT848=m 77.2778 -CONFIG_VIDEO_BT848_DVB=y 77.2779 -CONFIG_VIDEO_PMS=m 77.2780 -CONFIG_VIDEO_BWQCAM=m 77.2781 -CONFIG_VIDEO_CQCAM=m 77.2782 -CONFIG_VIDEO_W9966=m 77.2783 -# CONFIG_VIDEO_CPIA2 is not set 77.2784 -CONFIG_VIDEO_ZORAN=m 77.2785 -CONFIG_VIDEO_ZORAN_DC30=m 77.2786 -CONFIG_VIDEO_ZORAN_ZR36060=m 77.2787 -CONFIG_VIDEO_ZORAN_BUZ=m 77.2788 -CONFIG_VIDEO_ZORAN_DC10=m 77.2789 -CONFIG_VIDEO_ZORAN_LML33=m 77.2790 -CONFIG_VIDEO_ZORAN_LML33R10=m 77.2791 -CONFIG_VIDEO_ZORAN_AVS6EYES=m 77.2792 -CONFIG_VIDEO_SAA7134=m 77.2793 -# CONFIG_VIDEO_SAA7134_ALSA is not set 77.2794 -CONFIG_VIDEO_SAA7134_RC=y 77.2795 -CONFIG_VIDEO_SAA7134_DVB=m 77.2796 -CONFIG_VIDEO_MXB=m 77.2797 -CONFIG_VIDEO_HEXIUM_ORION=m 77.2798 -CONFIG_VIDEO_HEXIUM_GEMINI=m 77.2799 -CONFIG_VIDEO_CX88=m 77.2800 -# CONFIG_VIDEO_CX88_ALSA is not set 77.2801 -CONFIG_VIDEO_CX88_BLACKBIRD=m 77.2802 -CONFIG_VIDEO_CX88_DVB=m 77.2803 -CONFIG_VIDEO_CX88_MPEG=m 77.2804 -CONFIG_VIDEO_CX88_VP3054=m 77.2805 -CONFIG_VIDEO_CX23885=m 77.2806 -# CONFIG_VIDEO_AU0828 is not set 77.2807 -CONFIG_VIDEO_IVTV=m 77.2808 -# CONFIG_VIDEO_FB_IVTV is not set 77.2809 -CONFIG_VIDEO_CX18=m 77.2810 -# CONFIG_VIDEO_CX18_ALSA is not set 77.2811 -CONFIG_VIDEO_SAA7164=m 77.2812 -CONFIG_VIDEO_CAFE_CCIC=m 77.2813 -# CONFIG_VIDEO_SR030PC30 is not set 77.2814 -# CONFIG_VIDEO_VIA_CAMERA is not set 77.2815 -CONFIG_SOC_CAMERA=m 77.2816 -# CONFIG_SOC_CAMERA_IMX074 is not set 77.2817 -# CONFIG_SOC_CAMERA_MT9M001 is not set 77.2818 -# CONFIG_SOC_CAMERA_MT9M111 is not set 77.2819 -# CONFIG_SOC_CAMERA_MT9T031 is not set 77.2820 -# CONFIG_SOC_CAMERA_MT9T112 is not set 77.2821 -# CONFIG_SOC_CAMERA_MT9V022 is not set 77.2822 -# CONFIG_SOC_CAMERA_RJ54N1 is not set 77.2823 -# CONFIG_SOC_CAMERA_TW9910 is not set 77.2824 -# CONFIG_SOC_CAMERA_PLATFORM is not set 77.2825 -# CONFIG_SOC_CAMERA_OV6650 is not set 77.2826 -# CONFIG_SOC_CAMERA_OV772X is not set 77.2827 -# CONFIG_SOC_CAMERA_OV9640 is not set 77.2828 -CONFIG_V4L_USB_DRIVERS=y 77.2829 -# CONFIG_USB_VIDEO_CLASS is not set 77.2830 -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y 77.2831 -CONFIG_USB_GSPCA=m 77.2832 -# CONFIG_USB_M5602 is not set 77.2833 -# CONFIG_USB_STV06XX is not set 77.2834 -# CONFIG_USB_GL860 is not set 77.2835 -# CONFIG_USB_GSPCA_BENQ is not set 77.2836 -# CONFIG_USB_GSPCA_CONEX is not set 77.2837 -# CONFIG_USB_GSPCA_CPIA1 is not set 77.2838 -# CONFIG_USB_GSPCA_ETOMS is not set 77.2839 -# CONFIG_USB_GSPCA_FINEPIX is not set 77.2840 -# CONFIG_USB_GSPCA_JEILINJ is not set 77.2841 -# CONFIG_USB_GSPCA_KONICA is not set 77.2842 -# CONFIG_USB_GSPCA_MARS is not set 77.2843 -# CONFIG_USB_GSPCA_MR97310A is not set 77.2844 -# CONFIG_USB_GSPCA_OV519 is not set 77.2845 -# CONFIG_USB_GSPCA_OV534 is not set 77.2846 -# CONFIG_USB_GSPCA_OV534_9 is not set 77.2847 -# CONFIG_USB_GSPCA_PAC207 is not set 77.2848 -# CONFIG_USB_GSPCA_PAC7302 is not set 77.2849 -# CONFIG_USB_GSPCA_PAC7311 is not set 77.2850 -# CONFIG_USB_GSPCA_SN9C2028 is not set 77.2851 -# CONFIG_USB_GSPCA_SN9C20X is not set 77.2852 -# CONFIG_USB_GSPCA_SONIXB is not set 77.2853 -# CONFIG_USB_GSPCA_SONIXJ is not set 77.2854 -# CONFIG_USB_GSPCA_SPCA500 is not set 77.2855 -# CONFIG_USB_GSPCA_SPCA501 is not set 77.2856 -# CONFIG_USB_GSPCA_SPCA505 is not set 77.2857 -# CONFIG_USB_GSPCA_SPCA506 is not set 77.2858 -# CONFIG_USB_GSPCA_SPCA508 is not set 77.2859 -# CONFIG_USB_GSPCA_SPCA561 is not set 77.2860 -# CONFIG_USB_GSPCA_SPCA1528 is not set 77.2861 -# CONFIG_USB_GSPCA_SQ905 is not set 77.2862 -# CONFIG_USB_GSPCA_SQ905C is not set 77.2863 -# CONFIG_USB_GSPCA_SQ930X is not set 77.2864 -# CONFIG_USB_GSPCA_STK014 is not set 77.2865 -# CONFIG_USB_GSPCA_STV0680 is not set 77.2866 -# CONFIG_USB_GSPCA_SUNPLUS is not set 77.2867 -# CONFIG_USB_GSPCA_T613 is not set 77.2868 -# CONFIG_USB_GSPCA_TV8532 is not set 77.2869 -# CONFIG_USB_GSPCA_VC032X is not set 77.2870 -# CONFIG_USB_GSPCA_XIRLINK_CIT is not set 77.2871 -# CONFIG_USB_GSPCA_ZC3XX is not set 77.2872 -# CONFIG_VIDEO_PVRUSB2 is not set 77.2873 -# CONFIG_VIDEO_HDPVR is not set 77.2874 -# CONFIG_VIDEO_EM28XX is not set 77.2875 -# CONFIG_VIDEO_TLG2300 is not set 77.2876 -# CONFIG_VIDEO_CX231XX is not set 77.2877 -# CONFIG_VIDEO_USBVISION is not set 77.2878 -# CONFIG_USB_VICAM is not set 77.2879 -# CONFIG_USB_IBMCAM is not set 77.2880 -# CONFIG_USB_KONICAWC is not set 77.2881 -# CONFIG_USB_ET61X251 is not set 77.2882 -# CONFIG_USB_SE401 is not set 77.2883 -# CONFIG_USB_SN9C102 is not set 77.2884 -# CONFIG_USB_PWC is not set 77.2885 -# CONFIG_USB_ZR364XX is not set 77.2886 -# CONFIG_USB_STKWEBCAM is not set 77.2887 -# CONFIG_USB_S2255 is not set 77.2888 -# CONFIG_V4L_MEM2MEM_DRIVERS is not set 77.2889 -CONFIG_RADIO_ADAPTERS=y 77.2890 -CONFIG_RADIO_CADET=m 77.2891 -CONFIG_RADIO_RTRACK=m 77.2892 -CONFIG_RADIO_RTRACK2=m 77.2893 -CONFIG_RADIO_AZTECH=m 77.2894 -CONFIG_RADIO_GEMTEK=m 77.2895 -CONFIG_RADIO_GEMTEK_PCI=m 77.2896 -CONFIG_RADIO_MAXIRADIO=m 77.2897 -CONFIG_RADIO_MAESTRO=m 77.2898 -# CONFIG_RADIO_MIROPCM20 is not set 77.2899 -CONFIG_RADIO_SF16FMI=m 77.2900 -CONFIG_RADIO_SF16FMR2=m 77.2901 -CONFIG_RADIO_TERRATEC=m 77.2902 -CONFIG_RADIO_TRUST=m 77.2903 -CONFIG_RADIO_TYPHOON=m 77.2904 -CONFIG_RADIO_ZOLTRIX=m 77.2905 -CONFIG_I2C_SI4713=m 77.2906 -CONFIG_RADIO_SI4713=m 77.2907 -# CONFIG_USB_DSBR is not set 77.2908 -CONFIG_RADIO_SI470X=y 77.2909 -# CONFIG_USB_SI470X is not set 77.2910 -CONFIG_I2C_SI470X=m 77.2911 -# CONFIG_USB_MR800 is not set 77.2912 -CONFIG_RADIO_TEA5764=m 77.2913 -CONFIG_RADIO_SAA7706H=m 77.2914 -CONFIG_RADIO_TEF6862=m 77.2915 -CONFIG_RADIO_TIMBERDALE=m 77.2916 -CONFIG_DVB_MAX_ADAPTERS=8 77.2917 -CONFIG_DVB_DYNAMIC_MINORS=y 77.2918 -CONFIG_DVB_CAPTURE_DRIVERS=y 77.2919 - 77.2920 -# 77.2921 -# Supported SAA7146 based PCI Adapters 77.2922 -# 77.2923 -CONFIG_TTPCI_EEPROM=m 77.2924 -CONFIG_DVB_AV7110=m 77.2925 -CONFIG_DVB_AV7110_OSD=y 77.2926 -CONFIG_DVB_BUDGET_CORE=m 77.2927 -CONFIG_DVB_BUDGET=m 77.2928 -CONFIG_DVB_BUDGET_CI=m 77.2929 -CONFIG_DVB_BUDGET_AV=m 77.2930 -CONFIG_DVB_BUDGET_PATCH=m 77.2931 - 77.2932 -# 77.2933 -# Supported USB Adapters 77.2934 -# 77.2935 -# CONFIG_DVB_USB is not set 77.2936 -# CONFIG_DVB_TTUSB_BUDGET is not set 77.2937 -# CONFIG_DVB_TTUSB_DEC is not set 77.2938 -CONFIG_SMS_SIANO_MDTV=m 77.2939 - 77.2940 -# 77.2941 -# Siano module components 77.2942 -# 77.2943 -# CONFIG_SMS_USB_DRV is not set 77.2944 -# CONFIG_SMS_SDIO_DRV is not set 77.2945 - 77.2946 -# 77.2947 -# Supported FlexCopII (B2C2) Adapters 77.2948 -# 77.2949 -CONFIG_DVB_B2C2_FLEXCOP=m 77.2950 -CONFIG_DVB_B2C2_FLEXCOP_PCI=m 77.2951 -# CONFIG_DVB_B2C2_FLEXCOP_USB is not set 77.2952 -# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set 77.2953 - 77.2954 -# 77.2955 -# Supported BT878 Adapters 77.2956 -# 77.2957 -CONFIG_DVB_BT8XX=m 77.2958 - 77.2959 -# 77.2960 -# Supported Pluto2 Adapters 77.2961 -# 77.2962 -CONFIG_DVB_PLUTO2=m 77.2963 - 77.2964 -# 77.2965 -# Supported SDMC DM1105 Adapters 77.2966 -# 77.2967 -CONFIG_DVB_DM1105=m 77.2968 -CONFIG_DVB_FIREDTV=m 77.2969 -CONFIG_DVB_FIREDTV_FIREWIRE=y 77.2970 -# CONFIG_DVB_FIREDTV_IEEE1394 is not set 77.2971 -CONFIG_DVB_FIREDTV_INPUT=y 77.2972 - 77.2973 -# 77.2974 -# Supported Earthsoft PT1 Adapters 77.2975 -# 77.2976 -CONFIG_DVB_PT1=m 77.2977 - 77.2978 -# 77.2979 -# Supported Mantis Adapters 77.2980 -# 77.2981 -CONFIG_MANTIS_CORE=m 77.2982 -CONFIG_DVB_MANTIS=m 77.2983 -CONFIG_DVB_HOPPER=m 77.2984 - 77.2985 -# 77.2986 -# Supported nGene Adapters 77.2987 -# 77.2988 -CONFIG_DVB_NGENE=m 77.2989 - 77.2990 -# 77.2991 -# Supported DVB Frontends 77.2992 -# 77.2993 -# CONFIG_DVB_FE_CUSTOMISE is not set 77.2994 - 77.2995 -# 77.2996 -# Multistandard (satellite) frontends 77.2997 -# 77.2998 -CONFIG_DVB_STB0899=m 77.2999 -CONFIG_DVB_STB6100=m 77.3000 -CONFIG_DVB_STV090x=m 77.3001 -CONFIG_DVB_STV6110x=m 77.3002 - 77.3003 -# 77.3004 -# DVB-S (satellite) frontends 77.3005 -# 77.3006 -CONFIG_DVB_CX24110=m 77.3007 -CONFIG_DVB_CX24123=m 77.3008 -CONFIG_DVB_MT312=m 77.3009 -CONFIG_DVB_ZL10036=m 77.3010 -CONFIG_DVB_ZL10039=m 77.3011 -CONFIG_DVB_S5H1420=m 77.3012 -CONFIG_DVB_STV0288=m 77.3013 -CONFIG_DVB_STB6000=m 77.3014 -CONFIG_DVB_STV0299=m 77.3015 -CONFIG_DVB_STV6110=m 77.3016 -CONFIG_DVB_STV0900=m 77.3017 -CONFIG_DVB_TDA8083=m 77.3018 -CONFIG_DVB_TDA10086=m 77.3019 -CONFIG_DVB_TDA8261=m 77.3020 -CONFIG_DVB_VES1X93=m 77.3021 -CONFIG_DVB_TUNER_ITD1000=m 77.3022 -CONFIG_DVB_TUNER_CX24113=m 77.3023 -CONFIG_DVB_TDA826X=m 77.3024 -CONFIG_DVB_TUA6100=m 77.3025 -CONFIG_DVB_CX24116=m 77.3026 -CONFIG_DVB_SI21XX=m 77.3027 -CONFIG_DVB_DS3000=m 77.3028 -CONFIG_DVB_MB86A16=m 77.3029 - 77.3030 -# 77.3031 -# DVB-T (terrestrial) frontends 77.3032 -# 77.3033 -CONFIG_DVB_SP8870=m 77.3034 -CONFIG_DVB_SP887X=m 77.3035 -CONFIG_DVB_CX22702=m 77.3036 -CONFIG_DVB_L64781=m 77.3037 -CONFIG_DVB_TDA1004X=m 77.3038 -CONFIG_DVB_NXT6000=m 77.3039 -CONFIG_DVB_MT352=m 77.3040 -CONFIG_DVB_ZL10353=m 77.3041 -CONFIG_DVB_DIB7000P=m 77.3042 -CONFIG_DVB_TDA10048=m 77.3043 - 77.3044 -# 77.3045 -# DVB-C (cable) frontends 77.3046 -# 77.3047 -CONFIG_DVB_VES1820=m 77.3048 -CONFIG_DVB_TDA10021=m 77.3049 -CONFIG_DVB_TDA10023=m 77.3050 -CONFIG_DVB_STV0297=m 77.3051 - 77.3052 -# 77.3053 -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends 77.3054 -# 77.3055 -CONFIG_DVB_NXT200X=m 77.3056 -CONFIG_DVB_OR51211=m 77.3057 -CONFIG_DVB_OR51132=m 77.3058 -CONFIG_DVB_BCM3510=m 77.3059 -CONFIG_DVB_LGDT330X=m 77.3060 -CONFIG_DVB_LGDT3305=m 77.3061 -CONFIG_DVB_S5H1409=m 77.3062 -CONFIG_DVB_S5H1411=m 77.3063 - 77.3064 -# 77.3065 -# ISDB-T (terrestrial) frontends 77.3066 -# 77.3067 - 77.3068 -# 77.3069 -# Digital terrestrial only tuners/PLL 77.3070 -# 77.3071 -CONFIG_DVB_PLL=m 77.3072 - 77.3073 -# 77.3074 -# SEC control devices for DVB-S 77.3075 -# 77.3076 -CONFIG_DVB_LNBP21=m 77.3077 -CONFIG_DVB_ISL6405=m 77.3078 -CONFIG_DVB_ISL6421=m 77.3079 -CONFIG_DVB_ISL6423=m 77.3080 -CONFIG_DVB_TDA665x=m 77.3081 - 77.3082 -# 77.3083 -# Tools to develop new frontends 77.3084 -# 77.3085 -# CONFIG_DVB_DUMMY_FE is not set 77.3086 -CONFIG_DAB=y 77.3087 -CONFIG_USB_DABUSB=m 77.3088 - 77.3089 -# 77.3090 -# Graphics support 77.3091 -# 77.3092 -CONFIG_AGP=m 77.3093 -CONFIG_AGP_ALI=m 77.3094 -CONFIG_AGP_ATI=m 77.3095 -CONFIG_AGP_AMD=m 77.3096 -CONFIG_AGP_AMD64=m 77.3097 -CONFIG_AGP_INTEL=m 77.3098 -CONFIG_AGP_NVIDIA=m 77.3099 -CONFIG_AGP_SIS=m 77.3100 -CONFIG_AGP_SWORKS=m 77.3101 -CONFIG_AGP_VIA=m 77.3102 -CONFIG_AGP_EFFICEON=m 77.3103 -CONFIG_VGA_ARB=y 77.3104 -CONFIG_VGA_ARB_MAX_GPUS=16 77.3105 -CONFIG_DRM=m 77.3106 -CONFIG_DRM_KMS_HELPER=m 77.3107 -CONFIG_DRM_TTM=m 77.3108 -# CONFIG_DRM_TDFX is not set 77.3109 -# CONFIG_DRM_R128 is not set 77.3110 -# CONFIG_DRM_RADEON is not set 77.3111 -# CONFIG_DRM_I810 is not set 77.3112 -# CONFIG_DRM_MGA is not set 77.3113 -# CONFIG_DRM_SIS is not set 77.3114 -# CONFIG_DRM_VIA is not set 77.3115 -# CONFIG_DRM_SAVAGE is not set 77.3116 -CONFIG_STUB_POULSBO=m 77.3117 -CONFIG_VGASTATE=m 77.3118 -CONFIG_VIDEO_OUTPUT_CONTROL=m 77.3119 -CONFIG_FB=m 77.3120 -CONFIG_FIRMWARE_EDID=y 77.3121 -CONFIG_FB_DDC=m 77.3122 -# CONFIG_FB_BOOT_VESA_SUPPORT is not set 77.3123 -CONFIG_FB_CFB_FILLRECT=m 77.3124 -CONFIG_FB_CFB_COPYAREA=m 77.3125 -CONFIG_FB_CFB_IMAGEBLIT=m 77.3126 -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set 77.3127 -CONFIG_FB_SYS_FILLRECT=m 77.3128 -CONFIG_FB_SYS_COPYAREA=m 77.3129 -CONFIG_FB_SYS_IMAGEBLIT=m 77.3130 -CONFIG_FB_FOREIGN_ENDIAN=y 77.3131 -CONFIG_FB_BOTH_ENDIAN=y 77.3132 -# CONFIG_FB_BIG_ENDIAN is not set 77.3133 -# CONFIG_FB_LITTLE_ENDIAN is not set 77.3134 -CONFIG_FB_SYS_FOPS=m 77.3135 -CONFIG_FB_DEFERRED_IO=y 77.3136 -CONFIG_FB_HECUBA=m 77.3137 -CONFIG_FB_SVGALIB=m 77.3138 -# CONFIG_FB_MACMODES is not set 77.3139 -CONFIG_FB_BACKLIGHT=y 77.3140 -CONFIG_FB_MODE_HELPERS=y 77.3141 -CONFIG_FB_TILEBLITTING=y 77.3142 - 77.3143 -# 77.3144 -# Frame buffer hardware drivers 77.3145 -# 77.3146 -CONFIG_FB_CIRRUS=m 77.3147 -CONFIG_FB_PM2=m 77.3148 -CONFIG_FB_PM2_FIFO_DISCONNECT=y 77.3149 -CONFIG_FB_CYBER2000=m 77.3150 -CONFIG_FB_ARC=m 77.3151 -CONFIG_FB_VGA16=m 77.3152 -CONFIG_FB_UVESA=m 77.3153 -CONFIG_FB_N411=m 77.3154 -CONFIG_FB_HGA=m 77.3155 -CONFIG_FB_HGA_ACCEL=y 77.3156 -CONFIG_FB_S1D13XXX=m 77.3157 -CONFIG_FB_NVIDIA=m 77.3158 -CONFIG_FB_NVIDIA_I2C=y 77.3159 -CONFIG_FB_NVIDIA_DEBUG=y 77.3160 -CONFIG_FB_NVIDIA_BACKLIGHT=y 77.3161 -CONFIG_FB_RIVA=m 77.3162 -CONFIG_FB_RIVA_I2C=y 77.3163 -# CONFIG_FB_RIVA_DEBUG is not set 77.3164 -CONFIG_FB_RIVA_BACKLIGHT=y 77.3165 -# CONFIG_FB_I810 is not set 77.3166 -CONFIG_FB_LE80578=m 77.3167 -CONFIG_FB_CARILLO_RANCH=m 77.3168 -CONFIG_FB_INTEL=m 77.3169 -# CONFIG_FB_INTEL_DEBUG is not set 77.3170 -CONFIG_FB_INTEL_I2C=y 77.3171 -CONFIG_FB_MATROX=m 77.3172 -CONFIG_FB_MATROX_MILLENIUM=y 77.3173 -CONFIG_FB_MATROX_MYSTIQUE=y 77.3174 -CONFIG_FB_MATROX_G=y 77.3175 -CONFIG_FB_MATROX_I2C=m 77.3176 -CONFIG_FB_MATROX_MAVEN=m 77.3177 -CONFIG_FB_RADEON=m 77.3178 -CONFIG_FB_RADEON_I2C=y 77.3179 -CONFIG_FB_RADEON_BACKLIGHT=y 77.3180 -# CONFIG_FB_RADEON_DEBUG is not set 77.3181 -CONFIG_FB_ATY128=m 77.3182 -CONFIG_FB_ATY128_BACKLIGHT=y 77.3183 -CONFIG_FB_ATY=m 77.3184 -CONFIG_FB_ATY_CT=y 77.3185 -CONFIG_FB_ATY_GENERIC_LCD=y 77.3186 -CONFIG_FB_ATY_GX=y 77.3187 -CONFIG_FB_ATY_BACKLIGHT=y 77.3188 -CONFIG_FB_S3=m 77.3189 -CONFIG_FB_SAVAGE=m 77.3190 -CONFIG_FB_SAVAGE_I2C=y 77.3191 -CONFIG_FB_SAVAGE_ACCEL=y 77.3192 -CONFIG_FB_SIS=m 77.3193 -CONFIG_FB_SIS_300=y 77.3194 -CONFIG_FB_SIS_315=y 77.3195 -CONFIG_FB_VIA=m 77.3196 -# CONFIG_FB_VIA_DIRECT_PROCFS is not set 77.3197 -CONFIG_FB_NEOMAGIC=m 77.3198 -CONFIG_FB_KYRO=m 77.3199 -CONFIG_FB_3DFX=m 77.3200 -CONFIG_FB_3DFX_ACCEL=y 77.3201 -CONFIG_FB_3DFX_I2C=y 77.3202 -CONFIG_FB_VOODOO1=m 77.3203 -CONFIG_FB_VT8623=m 77.3204 -CONFIG_FB_TRIDENT=m 77.3205 -CONFIG_FB_ARK=m 77.3206 -CONFIG_FB_PM3=m 77.3207 -CONFIG_FB_CARMINE=m 77.3208 -CONFIG_FB_CARMINE_DRAM_EVAL=y 77.3209 -# CONFIG_CARMINE_DRAM_CUSTOM is not set 77.3210 -CONFIG_FB_GEODE=y 77.3211 -CONFIG_FB_GEODE_LX=m 77.3212 -CONFIG_FB_GEODE_GX=m 77.3213 -CONFIG_FB_GEODE_GX1=m 77.3214 -CONFIG_FB_TMIO=m 77.3215 -CONFIG_FB_TMIO_ACCELL=y 77.3216 -CONFIG_FB_SM501=m 77.3217 -CONFIG_FB_VIRTUAL=m 77.3218 -CONFIG_FB_METRONOME=m 77.3219 -CONFIG_FB_MB862XX=m 77.3220 -CONFIG_FB_MB862XX_PCI_GDC=y 77.3221 -CONFIG_FB_BROADSHEET=m 77.3222 -CONFIG_BACKLIGHT_LCD_SUPPORT=y 77.3223 -CONFIG_LCD_CLASS_DEVICE=m 77.3224 -CONFIG_LCD_L4F00242T03=m 77.3225 -CONFIG_LCD_LMS283GF05=m 77.3226 -CONFIG_LCD_LTV350QV=m 77.3227 -CONFIG_LCD_ILI9320=m 77.3228 -CONFIG_LCD_TDO24M=m 77.3229 -CONFIG_LCD_VGG2432A4=m 77.3230 -CONFIG_LCD_PLATFORM=m 77.3231 -# CONFIG_LCD_S6E63M0 is not set 77.3232 -CONFIG_BACKLIGHT_CLASS_DEVICE=m 77.3233 -CONFIG_BACKLIGHT_GENERIC=m 77.3234 -CONFIG_BACKLIGHT_PROGEAR=m 77.3235 -CONFIG_BACKLIGHT_CARILLO_RANCH=m 77.3236 -CONFIG_BACKLIGHT_MBP_NVIDIA=m 77.3237 -CONFIG_BACKLIGHT_SAHARA=m 77.3238 -# CONFIG_BACKLIGHT_ADP8860 is not set 77.3239 -# CONFIG_BACKLIGHT_PCF50633 is not set 77.3240 - 77.3241 -# 77.3242 -# Display device support 77.3243 -# 77.3244 -CONFIG_DISPLAY_SUPPORT=m 77.3245 - 77.3246 -# 77.3247 -# Display hardware drivers 77.3248 -# 77.3249 - 77.3250 -# 77.3251 -# Console display driver support 77.3252 -# 77.3253 -CONFIG_VGA_CONSOLE=y 77.3254 -# CONFIG_VGACON_SOFT_SCROLLBACK is not set 77.3255 -CONFIG_MDA_CONSOLE=m 77.3256 -CONFIG_DUMMY_CONSOLE=y 77.3257 -CONFIG_FRAMEBUFFER_CONSOLE=m 77.3258 -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y 77.3259 -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y 77.3260 -# CONFIG_FONTS is not set 77.3261 -CONFIG_FONT_8x8=y 77.3262 -CONFIG_FONT_8x16=y 77.3263 -# CONFIG_LOGO is not set 77.3264 -CONFIG_SOUND=m 77.3265 -CONFIG_SOUND_OSS_CORE=y 77.3266 -CONFIG_SOUND_OSS_CORE_PRECLAIM=y 77.3267 -CONFIG_SND=m 77.3268 -CONFIG_SND_TIMER=m 77.3269 -CONFIG_SND_PCM=m 77.3270 -CONFIG_SND_HWDEP=m 77.3271 -CONFIG_SND_RAWMIDI=m 77.3272 -CONFIG_SND_JACK=y 77.3273 -CONFIG_SND_SEQUENCER=m 77.3274 -CONFIG_SND_SEQ_DUMMY=m 77.3275 -CONFIG_SND_OSSEMUL=y 77.3276 -CONFIG_SND_MIXER_OSS=m 77.3277 -CONFIG_SND_PCM_OSS=m 77.3278 -CONFIG_SND_PCM_OSS_PLUGINS=y 77.3279 -CONFIG_SND_SEQUENCER_OSS=y 77.3280 -CONFIG_SND_DYNAMIC_MINORS=y 77.3281 -CONFIG_SND_SUPPORT_OLD_API=y 77.3282 -CONFIG_SND_VERBOSE_PROCFS=y 77.3283 -# CONFIG_SND_VERBOSE_PRINTK is not set 77.3284 -# CONFIG_SND_DEBUG is not set 77.3285 -CONFIG_SND_VMASTER=y 77.3286 -CONFIG_SND_DMA_SGBUF=y 77.3287 -CONFIG_SND_RAWMIDI_SEQ=m 77.3288 -CONFIG_SND_OPL3_LIB_SEQ=m 77.3289 -CONFIG_SND_OPL4_LIB_SEQ=m 77.3290 -CONFIG_SND_SBAWE_SEQ=m 77.3291 -CONFIG_SND_EMU10K1_SEQ=m 77.3292 -CONFIG_SND_MPU401_UART=m 77.3293 -CONFIG_SND_OPL3_LIB=m 77.3294 -CONFIG_SND_OPL4_LIB=m 77.3295 -CONFIG_SND_VX_LIB=m 77.3296 -CONFIG_SND_AC97_CODEC=m 77.3297 -CONFIG_SND_DRIVERS=y 77.3298 -CONFIG_SND_DUMMY=m 77.3299 -# CONFIG_SND_ALOOP is not set 77.3300 -CONFIG_SND_VIRMIDI=m 77.3301 -CONFIG_SND_MTPAV=m 77.3302 -CONFIG_SND_MTS64=m 77.3303 -CONFIG_SND_SERIAL_U16550=m 77.3304 -CONFIG_SND_MPU401=m 77.3305 -CONFIG_SND_PORTMAN2X4=m 77.3306 -# CONFIG_SND_AC97_POWER_SAVE is not set 77.3307 -CONFIG_SND_WSS_LIB=m 77.3308 -CONFIG_SND_SB_COMMON=m 77.3309 -CONFIG_SND_SB8_DSP=m 77.3310 -CONFIG_SND_SB16_DSP=m 77.3311 -CONFIG_SND_ISA=y 77.3312 -CONFIG_SND_ADLIB=m 77.3313 -CONFIG_SND_AD1816A=m 77.3314 -CONFIG_SND_AD1848=m 77.3315 -CONFIG_SND_ALS100=m 77.3316 -# CONFIG_SND_AZT1605 is not set 77.3317 -# CONFIG_SND_AZT2316 is not set 77.3318 -CONFIG_SND_AZT2320=m 77.3319 -CONFIG_SND_CMI8330=m 77.3320 -CONFIG_SND_CS4231=m 77.3321 -CONFIG_SND_CS4236=m 77.3322 -CONFIG_SND_ES1688=m 77.3323 -CONFIG_SND_ES18XX=m 77.3324 -CONFIG_SND_SC6000=m 77.3325 -CONFIG_SND_GUSCLASSIC=m 77.3326 -CONFIG_SND_GUSEXTREME=m 77.3327 -CONFIG_SND_GUSMAX=m 77.3328 -CONFIG_SND_INTERWAVE=m 77.3329 -CONFIG_SND_INTERWAVE_STB=m 77.3330 -CONFIG_SND_JAZZ16=m 77.3331 -CONFIG_SND_OPL3SA2=m 77.3332 -CONFIG_SND_OPTI92X_AD1848=m 77.3333 -CONFIG_SND_OPTI92X_CS4231=m 77.3334 -CONFIG_SND_OPTI93X=m 77.3335 -CONFIG_SND_MIRO=m 77.3336 -CONFIG_SND_SB8=m 77.3337 -CONFIG_SND_SB16=m 77.3338 -CONFIG_SND_SBAWE=m 77.3339 -CONFIG_SND_SB16_CSP=y 77.3340 -CONFIG_SND_SSCAPE=m 77.3341 -CONFIG_SND_WAVEFRONT=m 77.3342 -CONFIG_SND_MSND_PINNACLE=m 77.3343 -CONFIG_SND_MSND_CLASSIC=m 77.3344 -CONFIG_SND_PCI=y 77.3345 -CONFIG_SND_AD1889=m 77.3346 -CONFIG_SND_ALS300=m 77.3347 -CONFIG_SND_ALS4000=m 77.3348 -CONFIG_SND_ALI5451=m 77.3349 -# CONFIG_SND_ASIHPI is not set 77.3350 -CONFIG_SND_ATIIXP=m 77.3351 -CONFIG_SND_ATIIXP_MODEM=m 77.3352 -CONFIG_SND_AU8810=m 77.3353 -CONFIG_SND_AU8820=m 77.3354 -CONFIG_SND_AU8830=m 77.3355 -CONFIG_SND_AW2=m 77.3356 -CONFIG_SND_AZT3328=m 77.3357 -CONFIG_SND_BT87X=m 77.3358 -# CONFIG_SND_BT87X_OVERCLOCK is not set 77.3359 -CONFIG_SND_CA0106=m 77.3360 -CONFIG_SND_CMIPCI=m 77.3361 -CONFIG_SND_OXYGEN_LIB=m 77.3362 -CONFIG_SND_OXYGEN=m 77.3363 -CONFIG_SND_CS4281=m 77.3364 -CONFIG_SND_CS46XX=m 77.3365 -CONFIG_SND_CS46XX_NEW_DSP=y 77.3366 -CONFIG_SND_CS5530=m 77.3367 -CONFIG_SND_CS5535AUDIO=m 77.3368 -CONFIG_SND_CTXFI=m 77.3369 -CONFIG_SND_DARLA20=m 77.3370 -CONFIG_SND_GINA20=m 77.3371 -CONFIG_SND_LAYLA20=m 77.3372 -CONFIG_SND_DARLA24=m 77.3373 -CONFIG_SND_GINA24=m 77.3374 -CONFIG_SND_LAYLA24=m 77.3375 -CONFIG_SND_MONA=m 77.3376 -CONFIG_SND_MIA=m 77.3377 -CONFIG_SND_ECHO3G=m 77.3378 -CONFIG_SND_INDIGO=m 77.3379 -CONFIG_SND_INDIGOIO=m 77.3380 -CONFIG_SND_INDIGODJ=m 77.3381 -CONFIG_SND_INDIGOIOX=m 77.3382 -CONFIG_SND_INDIGODJX=m 77.3383 -CONFIG_SND_EMU10K1=m 77.3384 -CONFIG_SND_EMU10K1X=m 77.3385 -CONFIG_SND_ENS1370=m 77.3386 -CONFIG_SND_ENS1371=m 77.3387 -CONFIG_SND_ES1938=m 77.3388 -CONFIG_SND_ES1968=m 77.3389 -# CONFIG_SND_ES1968_INPUT is not set 77.3390 -CONFIG_SND_FM801=m 77.3391 -# CONFIG_SND_FM801_TEA575X_BOOL is not set 77.3392 -CONFIG_SND_HDA_INTEL=m 77.3393 -# CONFIG_SND_HDA_HWDEP is not set 77.3394 -# CONFIG_SND_HDA_INPUT_BEEP is not set 77.3395 -# CONFIG_SND_HDA_INPUT_JACK is not set 77.3396 -# CONFIG_SND_HDA_PATCH_LOADER is not set 77.3397 -CONFIG_SND_HDA_CODEC_REALTEK=y 77.3398 -CONFIG_SND_HDA_CODEC_ANALOG=y 77.3399 -CONFIG_SND_HDA_CODEC_SIGMATEL=y 77.3400 -CONFIG_SND_HDA_CODEC_VIA=y 77.3401 -CONFIG_SND_HDA_CODEC_HDMI=y 77.3402 -CONFIG_SND_HDA_CODEC_CIRRUS=y 77.3403 -CONFIG_SND_HDA_CODEC_CONEXANT=y 77.3404 -CONFIG_SND_HDA_CODEC_CA0110=y 77.3405 -CONFIG_SND_HDA_CODEC_CMEDIA=y 77.3406 -CONFIG_SND_HDA_CODEC_SI3054=y 77.3407 -CONFIG_SND_HDA_GENERIC=y 77.3408 -# CONFIG_SND_HDA_POWER_SAVE is not set 77.3409 -CONFIG_SND_HDSP=m 77.3410 -CONFIG_SND_HDSPM=m 77.3411 -CONFIG_SND_HIFIER=m 77.3412 -CONFIG_SND_ICE1712=m 77.3413 -CONFIG_SND_ICE1724=m 77.3414 -CONFIG_SND_INTEL8X0=m 77.3415 -CONFIG_SND_INTEL8X0M=m 77.3416 -CONFIG_SND_KORG1212=m 77.3417 -CONFIG_SND_LX6464ES=m 77.3418 -CONFIG_SND_MAESTRO3=m 77.3419 -# CONFIG_SND_MAESTRO3_INPUT is not set 77.3420 -CONFIG_SND_MIXART=m 77.3421 -CONFIG_SND_NM256=m 77.3422 -CONFIG_SND_PCXHR=m 77.3423 -CONFIG_SND_RIPTIDE=m 77.3424 -CONFIG_SND_RME32=m 77.3425 -CONFIG_SND_RME96=m 77.3426 -CONFIG_SND_RME9652=m 77.3427 -CONFIG_SND_SIS7019=m 77.3428 -CONFIG_SND_SONICVIBES=m 77.3429 -CONFIG_SND_TRIDENT=m 77.3430 -CONFIG_SND_VIA82XX=m 77.3431 -CONFIG_SND_VIA82XX_MODEM=m 77.3432 -CONFIG_SND_VIRTUOSO=m 77.3433 -CONFIG_SND_VX222=m 77.3434 -CONFIG_SND_YMFPCI=m 77.3435 -CONFIG_SND_SPI=y 77.3436 -CONFIG_SND_USB=y 77.3437 -CONFIG_SND_USB_AUDIO=m 77.3438 -CONFIG_SND_USB_UA101=m 77.3439 -CONFIG_SND_USB_USX2Y=m 77.3440 -CONFIG_SND_USB_CAIAQ=m 77.3441 -CONFIG_SND_USB_CAIAQ_INPUT=y 77.3442 -CONFIG_SND_USB_US122L=m 77.3443 -CONFIG_SND_SOC=m 77.3444 -CONFIG_SND_SOC_I2C_AND_SPI=m 77.3445 -CONFIG_SND_SOC_ALL_CODECS=m 77.3446 -CONFIG_SND_SOC_WM_HUBS=m 77.3447 -CONFIG_SND_SOC_AD1836=m 77.3448 -CONFIG_SND_SOC_AD193X=m 77.3449 -CONFIG_SND_SOC_AD73311=m 77.3450 -CONFIG_SND_SOC_ADS117X=m 77.3451 -CONFIG_SND_SOC_AK4104=m 77.3452 -CONFIG_SND_SOC_AK4535=m 77.3453 -CONFIG_SND_SOC_AK4642=m 77.3454 -CONFIG_SND_SOC_AK4671=m 77.3455 -CONFIG_SND_SOC_CS42L51=m 77.3456 -CONFIG_SND_SOC_CS4270=m 77.3457 -CONFIG_SND_SOC_CX20442=m 77.3458 -CONFIG_SND_SOC_L3=m 77.3459 -CONFIG_SND_SOC_DA7210=m 77.3460 -CONFIG_SND_SOC_MAX98088=m 77.3461 -CONFIG_SND_SOC_PCM3008=m 77.3462 -CONFIG_SND_SOC_SPDIF=m 77.3463 -CONFIG_SND_SOC_SSM2602=m 77.3464 -CONFIG_SND_SOC_TLV320AIC23=m 77.3465 -CONFIG_SND_SOC_TLV320AIC26=m 77.3466 -CONFIG_SND_SOC_TLV320AIC3X=m 77.3467 -CONFIG_SND_SOC_TLV320DAC33=m 77.3468 -CONFIG_SND_SOC_UDA134X=m 77.3469 -CONFIG_SND_SOC_UDA1380=m 77.3470 -CONFIG_SND_SOC_WM8400=m 77.3471 -CONFIG_SND_SOC_WM8510=m 77.3472 -CONFIG_SND_SOC_WM8523=m 77.3473 -CONFIG_SND_SOC_WM8580=m 77.3474 -CONFIG_SND_SOC_WM8711=m 77.3475 -CONFIG_SND_SOC_WM8727=m 77.3476 -CONFIG_SND_SOC_WM8728=m 77.3477 -CONFIG_SND_SOC_WM8731=m 77.3478 -CONFIG_SND_SOC_WM8741=m 77.3479 -CONFIG_SND_SOC_WM8750=m 77.3480 -CONFIG_SND_SOC_WM8753=m 77.3481 -CONFIG_SND_SOC_WM8776=m 77.3482 -CONFIG_SND_SOC_WM8804=m 77.3483 -CONFIG_SND_SOC_WM8900=m 77.3484 -CONFIG_SND_SOC_WM8903=m 77.3485 -CONFIG_SND_SOC_WM8904=m 77.3486 -CONFIG_SND_SOC_WM8940=m 77.3487 -CONFIG_SND_SOC_WM8955=m 77.3488 -CONFIG_SND_SOC_WM8960=m 77.3489 -CONFIG_SND_SOC_WM8961=m 77.3490 -CONFIG_SND_SOC_WM8962=m 77.3491 -CONFIG_SND_SOC_WM8971=m 77.3492 -CONFIG_SND_SOC_WM8974=m 77.3493 -CONFIG_SND_SOC_WM8978=m 77.3494 -CONFIG_SND_SOC_WM8985=m 77.3495 -CONFIG_SND_SOC_WM8988=m 77.3496 -CONFIG_SND_SOC_WM8990=m 77.3497 -CONFIG_SND_SOC_WM8993=m 77.3498 -CONFIG_SND_SOC_WM9081=m 77.3499 -CONFIG_SND_SOC_MAX9877=m 77.3500 -CONFIG_SND_SOC_TPA6130A2=m 77.3501 -CONFIG_SND_SOC_WM2000=m 77.3502 -CONFIG_SND_SOC_WM9090=m 77.3503 -# CONFIG_SOUND_PRIME is not set 77.3504 -CONFIG_AC97_BUS=m 77.3505 -CONFIG_HID_SUPPORT=y 77.3506 -CONFIG_HID=y 77.3507 -CONFIG_HIDRAW=y 77.3508 - 77.3509 -# 77.3510 -# USB Input Devices 77.3511 -# 77.3512 -CONFIG_USB_HID=m 77.3513 -CONFIG_HID_PID=y 77.3514 -CONFIG_USB_HIDDEV=y 77.3515 - 77.3516 -# 77.3517 -# USB HID Boot Protocol drivers 77.3518 -# 77.3519 -CONFIG_USB_KBD=m 77.3520 -CONFIG_USB_MOUSE=m 77.3521 - 77.3522 -# 77.3523 -# Special HID drivers 77.3524 -# 77.3525 -CONFIG_HID_3M_PCT=m 77.3526 -CONFIG_HID_A4TECH=m 77.3527 -# CONFIG_HID_ACRUX_FF is not set 77.3528 -CONFIG_HID_APPLE=m 77.3529 -CONFIG_HID_BELKIN=m 77.3530 -# CONFIG_HID_CANDO is not set 77.3531 -CONFIG_HID_CHERRY=m 77.3532 -CONFIG_HID_CHICONY=m 77.3533 -# CONFIG_HID_PRODIKEYS is not set 77.3534 -CONFIG_HID_CYPRESS=m 77.3535 -CONFIG_HID_DRAGONRISE=m 77.3536 -CONFIG_DRAGONRISE_FF=y 77.3537 -# CONFIG_HID_EGALAX is not set 77.3538 -# CONFIG_HID_ELECOM is not set 77.3539 -CONFIG_HID_EZKEY=m 77.3540 -CONFIG_HID_KYE=m 77.3541 -# CONFIG_HID_UCLOGIC is not set 77.3542 -# CONFIG_HID_WALTOP is not set 77.3543 -CONFIG_HID_GYRATION=m 77.3544 -CONFIG_HID_TWINHAN=m 77.3545 -CONFIG_HID_KENSINGTON=m 77.3546 -CONFIG_HID_LOGITECH=m 77.3547 -CONFIG_LOGITECH_FF=y 77.3548 -CONFIG_LOGIRUMBLEPAD2_FF=y 77.3549 -CONFIG_LOGIG940_FF=y 77.3550 -# CONFIG_LOGIWII_FF is not set 77.3551 -CONFIG_HID_MAGICMOUSE=m 77.3552 -CONFIG_HID_MICROSOFT=m 77.3553 -CONFIG_HID_MOSART=m 77.3554 -CONFIG_HID_MONTEREY=m 77.3555 -CONFIG_HID_NTRIG=m 77.3556 -CONFIG_HID_ORTEK=m 77.3557 -CONFIG_HID_PANTHERLORD=m 77.3558 -CONFIG_PANTHERLORD_FF=y 77.3559 -CONFIG_HID_PETALYNX=m 77.3560 -# CONFIG_HID_PICOLCD is not set 77.3561 -CONFIG_HID_QUANTA=m 77.3562 -# CONFIG_HID_ROCCAT is not set 77.3563 -# CONFIG_HID_ROCCAT_KONE is not set 77.3564 -# CONFIG_HID_ROCCAT_PYRA is not set 77.3565 -CONFIG_HID_SAMSUNG=m 77.3566 -CONFIG_HID_SONY=m 77.3567 -CONFIG_HID_STANTUM=m 77.3568 -CONFIG_HID_SUNPLUS=m 77.3569 -CONFIG_HID_GREENASIA=m 77.3570 -CONFIG_GREENASIA_FF=y 77.3571 -CONFIG_HID_SMARTJOYPLUS=m 77.3572 -CONFIG_SMARTJOYPLUS_FF=y 77.3573 -CONFIG_HID_TOPSEED=m 77.3574 -CONFIG_HID_THRUSTMASTER=m 77.3575 -# CONFIG_THRUSTMASTER_FF is not set 77.3576 -CONFIG_HID_WACOM=m 77.3577 -# CONFIG_HID_WACOM_POWER_SUPPLY is not set 77.3578 -CONFIG_HID_ZEROPLUS=m 77.3579 -CONFIG_ZEROPLUS_FF=y 77.3580 -# CONFIG_HID_ZYDACRON is not set 77.3581 -CONFIG_USB_SUPPORT=y 77.3582 -CONFIG_USB_ARCH_HAS_HCD=y 77.3583 -CONFIG_USB_ARCH_HAS_OHCI=y 77.3584 -CONFIG_USB_ARCH_HAS_EHCI=y 77.3585 -CONFIG_USB=m 77.3586 -# CONFIG_USB_DEBUG is not set 77.3587 -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set 77.3588 - 77.3589 -# 77.3590 -# Miscellaneous USB options 77.3591 -# 77.3592 -# CONFIG_USB_DEVICEFS is not set 77.3593 -CONFIG_USB_DEVICE_CLASS=y 77.3594 -CONFIG_USB_DYNAMIC_MINORS=y 77.3595 -# CONFIG_USB_OTG_WHITELIST is not set 77.3596 -# CONFIG_USB_OTG_BLACKLIST_HUB is not set 77.3597 -CONFIG_USB_MON=m 77.3598 -CONFIG_USB_WUSB=m 77.3599 -CONFIG_USB_WUSB_CBAF=m 77.3600 -# CONFIG_USB_WUSB_CBAF_DEBUG is not set 77.3601 - 77.3602 -# 77.3603 -# USB Host Controller Drivers 77.3604 -# 77.3605 -CONFIG_USB_C67X00_HCD=m 77.3606 -CONFIG_USB_XHCI_HCD=m 77.3607 -CONFIG_USB_XHCI_HCD_DEBUGGING=y 77.3608 -CONFIG_USB_EHCI_HCD=m 77.3609 -CONFIG_USB_EHCI_ROOT_HUB_TT=y 77.3610 -CONFIG_USB_EHCI_TT_NEWSCHED=y 77.3611 -CONFIG_USB_OXU210HP_HCD=m 77.3612 -CONFIG_USB_ISP116X_HCD=m 77.3613 -CONFIG_USB_ISP1760_HCD=m 77.3614 -CONFIG_USB_ISP1362_HCD=m 77.3615 -CONFIG_USB_OHCI_HCD=m 77.3616 -CONFIG_USB_OHCI_HCD_SSB=y 77.3617 -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set 77.3618 -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set 77.3619 -CONFIG_USB_OHCI_LITTLE_ENDIAN=y 77.3620 -CONFIG_USB_UHCI_HCD=m 77.3621 -# CONFIG_USB_U132_HCD is not set 77.3622 -CONFIG_USB_SL811_HCD=m 77.3623 -CONFIG_USB_R8A66597_HCD=m 77.3624 -CONFIG_USB_WHCI_HCD=m 77.3625 -CONFIG_USB_HWA_HCD=m 77.3626 - 77.3627 -# 77.3628 -# USB Device Class drivers 77.3629 -# 77.3630 -CONFIG_USB_ACM=m 77.3631 -CONFIG_USB_PRINTER=m 77.3632 -CONFIG_USB_WDM=m 77.3633 -CONFIG_USB_TMC=m 77.3634 - 77.3635 -# 77.3636 -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may 77.3637 -# 77.3638 - 77.3639 -# 77.3640 -# also be needed; see USB_STORAGE Help for more info 77.3641 -# 77.3642 -CONFIG_USB_STORAGE=m 77.3643 -# CONFIG_USB_STORAGE_DEBUG is not set 77.3644 -CONFIG_USB_STORAGE_DATAFAB=m 77.3645 -CONFIG_USB_STORAGE_FREECOM=m 77.3646 -CONFIG_USB_STORAGE_ISD200=m 77.3647 -CONFIG_USB_STORAGE_USBAT=m 77.3648 -CONFIG_USB_STORAGE_SDDR09=m 77.3649 -CONFIG_USB_STORAGE_SDDR55=m 77.3650 -CONFIG_USB_STORAGE_JUMPSHOT=m 77.3651 -CONFIG_USB_STORAGE_ALAUDA=m 77.3652 -CONFIG_USB_STORAGE_ONETOUCH=m 77.3653 -CONFIG_USB_STORAGE_KARMA=m 77.3654 -CONFIG_USB_STORAGE_CYPRESS_ATACB=m 77.3655 -# CONFIG_USB_UAS is not set 77.3656 -# CONFIG_USB_LIBUSUAL is not set 77.3657 - 77.3658 -# 77.3659 -# USB Imaging devices 77.3660 -# 77.3661 -CONFIG_USB_MDC800=m 77.3662 -CONFIG_USB_MICROTEK=m 77.3663 - 77.3664 -# 77.3665 -# USB port drivers 77.3666 -# 77.3667 -CONFIG_USB_USS720=m 77.3668 -CONFIG_USB_SERIAL=m 77.3669 -# CONFIG_USB_EZUSB is not set 77.3670 -# CONFIG_USB_SERIAL_GENERIC is not set 77.3671 -# CONFIG_USB_SERIAL_AIRCABLE is not set 77.3672 -# CONFIG_USB_SERIAL_ARK3116 is not set 77.3673 -# CONFIG_USB_SERIAL_BELKIN is not set 77.3674 -# CONFIG_USB_SERIAL_CH341 is not set 77.3675 -# CONFIG_USB_SERIAL_WHITEHEAT is not set 77.3676 -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set 77.3677 -# CONFIG_USB_SERIAL_CP210X is not set 77.3678 -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set 77.3679 -# CONFIG_USB_SERIAL_EMPEG is not set 77.3680 -# CONFIG_USB_SERIAL_FTDI_SIO is not set 77.3681 -# CONFIG_USB_SERIAL_FUNSOFT is not set 77.3682 -# CONFIG_USB_SERIAL_VISOR is not set 77.3683 -# CONFIG_USB_SERIAL_IPAQ is not set 77.3684 -# CONFIG_USB_SERIAL_IR is not set 77.3685 -# CONFIG_USB_SERIAL_EDGEPORT is not set 77.3686 -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set 77.3687 -# CONFIG_USB_SERIAL_GARMIN is not set 77.3688 -# CONFIG_USB_SERIAL_IPW is not set 77.3689 -# CONFIG_USB_SERIAL_IUU is not set 77.3690 -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set 77.3691 -# CONFIG_USB_SERIAL_KEYSPAN is not set 77.3692 -# CONFIG_USB_SERIAL_KLSI is not set 77.3693 -# CONFIG_USB_SERIAL_KOBIL_SCT is not set 77.3694 -# CONFIG_USB_SERIAL_MCT_U232 is not set 77.3695 -# CONFIG_USB_SERIAL_MOS7720 is not set 77.3696 -# CONFIG_USB_SERIAL_MOS7840 is not set 77.3697 -# CONFIG_USB_SERIAL_MOTOROLA is not set 77.3698 -# CONFIG_USB_SERIAL_NAVMAN is not set 77.3699 -# CONFIG_USB_SERIAL_PL2303 is not set 77.3700 -# CONFIG_USB_SERIAL_OTI6858 is not set 77.3701 -# CONFIG_USB_SERIAL_QCAUX is not set 77.3702 -# CONFIG_USB_SERIAL_QUALCOMM is not set 77.3703 -# CONFIG_USB_SERIAL_SPCP8X5 is not set 77.3704 -# CONFIG_USB_SERIAL_HP4X is not set 77.3705 -# CONFIG_USB_SERIAL_SAFE is not set 77.3706 -# CONFIG_USB_SERIAL_SAMBA is not set 77.3707 -# CONFIG_USB_SERIAL_SIEMENS_MPI is not set 77.3708 -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set 77.3709 -# CONFIG_USB_SERIAL_SYMBOL is not set 77.3710 -# CONFIG_USB_SERIAL_TI is not set 77.3711 -# CONFIG_USB_SERIAL_CYBERJACK is not set 77.3712 -# CONFIG_USB_SERIAL_XIRCOM is not set 77.3713 -# CONFIG_USB_SERIAL_OPTION is not set 77.3714 -# CONFIG_USB_SERIAL_OMNINET is not set 77.3715 -# CONFIG_USB_SERIAL_OPTICON is not set 77.3716 -# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set 77.3717 -# CONFIG_USB_SERIAL_ZIO is not set 77.3718 -# CONFIG_USB_SERIAL_SSU100 is not set 77.3719 -# CONFIG_USB_SERIAL_DEBUG is not set 77.3720 - 77.3721 -# 77.3722 -# USB Miscellaneous drivers 77.3723 -# 77.3724 -CONFIG_USB_EMI62=m 77.3725 -CONFIG_USB_EMI26=m 77.3726 -CONFIG_USB_ADUTUX=m 77.3727 -CONFIG_USB_SEVSEG=m 77.3728 -CONFIG_USB_RIO500=m 77.3729 -CONFIG_USB_LEGOTOWER=m 77.3730 -CONFIG_USB_LCD=m 77.3731 -CONFIG_USB_LED=m 77.3732 -CONFIG_USB_CYPRESS_CY7C63=m 77.3733 -CONFIG_USB_CYTHERM=m 77.3734 -CONFIG_USB_IDMOUSE=m 77.3735 -CONFIG_USB_FTDI_ELAN=m 77.3736 -CONFIG_USB_APPLEDISPLAY=m 77.3737 -CONFIG_USB_SISUSBVGA=m 77.3738 -CONFIG_USB_SISUSBVGA_CON=y 77.3739 -CONFIG_USB_LD=m 77.3740 -CONFIG_USB_TRANCEVIBRATOR=m 77.3741 -CONFIG_USB_IOWARRIOR=m 77.3742 -CONFIG_USB_TEST=m 77.3743 -CONFIG_USB_ISIGHTFW=m 77.3744 -# CONFIG_USB_YUREX is not set 77.3745 -CONFIG_USB_GADGET=m 77.3746 -# CONFIG_USB_GADGET_DEBUG_FILES is not set 77.3747 -CONFIG_USB_GADGET_VBUS_DRAW=2 77.3748 -CONFIG_USB_GADGET_SELECTED=y 77.3749 -CONFIG_USB_GADGET_R8A66597=y 77.3750 -CONFIG_USB_R8A66597=m 77.3751 -# CONFIG_USB_GADGET_M66592 is not set 77.3752 -# CONFIG_USB_GADGET_AMD5536UDC is not set 77.3753 -# CONFIG_USB_GADGET_CI13XXX is not set 77.3754 -# CONFIG_USB_GADGET_NET2280 is not set 77.3755 -# CONFIG_USB_GADGET_GOKU is not set 77.3756 -# CONFIG_USB_GADGET_LANGWELL is not set 77.3757 -# CONFIG_USB_GADGET_DUMMY_HCD is not set 77.3758 -CONFIG_USB_GADGET_DUALSPEED=y 77.3759 -# CONFIG_USB_ZERO is not set 77.3760 -# CONFIG_USB_AUDIO is not set 77.3761 -# CONFIG_USB_ETH is not set 77.3762 -# CONFIG_USB_GADGETFS is not set 77.3763 -# CONFIG_USB_FUNCTIONFS is not set 77.3764 -# CONFIG_USB_FILE_STORAGE is not set 77.3765 -# CONFIG_USB_MASS_STORAGE is not set 77.3766 -# CONFIG_USB_G_SERIAL is not set 77.3767 -# CONFIG_USB_MIDI_GADGET is not set 77.3768 -# CONFIG_USB_G_PRINTER is not set 77.3769 -# CONFIG_USB_CDC_COMPOSITE is not set 77.3770 -# CONFIG_USB_G_NOKIA is not set 77.3771 -# CONFIG_USB_G_MULTI is not set 77.3772 -# CONFIG_USB_G_HID is not set 77.3773 -# CONFIG_USB_G_DBGP is not set 77.3774 -# CONFIG_USB_G_WEBCAM is not set 77.3775 - 77.3776 -# 77.3777 -# OTG and related infrastructure 77.3778 -# 77.3779 -CONFIG_USB_OTG_UTILS=y 77.3780 -CONFIG_USB_GPIO_VBUS=m 77.3781 -CONFIG_NOP_USB_XCEIV=m 77.3782 -CONFIG_UWB=m 77.3783 -CONFIG_UWB_HWA=m 77.3784 -CONFIG_UWB_WHCI=m 77.3785 -CONFIG_UWB_I1480U=m 77.3786 -CONFIG_MMC=m 77.3787 -# CONFIG_MMC_DEBUG is not set 77.3788 -# CONFIG_MMC_UNSAFE_RESUME is not set 77.3789 - 77.3790 -# 77.3791 -# MMC/SD/SDIO Card Drivers 77.3792 -# 77.3793 -CONFIG_MMC_BLOCK=m 77.3794 -CONFIG_MMC_BLOCK_MINORS=8 77.3795 -CONFIG_MMC_BLOCK_BOUNCE=y 77.3796 -CONFIG_SDIO_UART=m 77.3797 -CONFIG_MMC_TEST=m 77.3798 - 77.3799 -# 77.3800 -# MMC/SD/SDIO Host Controller Drivers 77.3801 -# 77.3802 -CONFIG_MMC_SDHCI=m 77.3803 -CONFIG_MMC_SDHCI_PCI=m 77.3804 -CONFIG_MMC_RICOH_MMC=y 77.3805 -CONFIG_MMC_SDHCI_PLTFM=m 77.3806 -CONFIG_MMC_WBSD=m 77.3807 -CONFIG_MMC_TIFM_SD=m 77.3808 -CONFIG_MMC_SPI=m 77.3809 -CONFIG_MMC_CB710=m 77.3810 -CONFIG_MMC_VIA_SDMMC=m 77.3811 -# CONFIG_MMC_USHC is not set 77.3812 -CONFIG_MEMSTICK=m 77.3813 -# CONFIG_MEMSTICK_DEBUG is not set 77.3814 - 77.3815 -# 77.3816 -# MemoryStick drivers 77.3817 -# 77.3818 -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set 77.3819 -CONFIG_MSPRO_BLOCK=m 77.3820 - 77.3821 -# 77.3822 -# MemoryStick Host Controller Drivers 77.3823 -# 77.3824 -CONFIG_MEMSTICK_TIFM_MS=m 77.3825 -CONFIG_MEMSTICK_JMICRON_38X=m 77.3826 -CONFIG_NEW_LEDS=y 77.3827 -CONFIG_LEDS_CLASS=y 77.3828 - 77.3829 -# 77.3830 -# LED drivers 77.3831 -# 77.3832 -# CONFIG_LEDS_NET5501 is not set 77.3833 -CONFIG_LEDS_ALIX2=m 77.3834 -CONFIG_LEDS_PCA9532=m 77.3835 -CONFIG_LEDS_GPIO=m 77.3836 -CONFIG_LEDS_GPIO_PLATFORM=y 77.3837 -CONFIG_LEDS_LP3944=m 77.3838 -# CONFIG_LEDS_LP5521 is not set 77.3839 -# CONFIG_LEDS_LP5523 is not set 77.3840 -CONFIG_LEDS_PCA955X=m 77.3841 -CONFIG_LEDS_DAC124S085=m 77.3842 -CONFIG_LEDS_REGULATOR=m 77.3843 -CONFIG_LEDS_BD2802=m 77.3844 -CONFIG_LEDS_LT3593=m 77.3845 -CONFIG_LEDS_TRIGGERS=y 77.3846 - 77.3847 -# 77.3848 -# LED Triggers 77.3849 -# 77.3850 -CONFIG_LEDS_TRIGGER_TIMER=m 77.3851 -CONFIG_LEDS_TRIGGER_HEARTBEAT=m 77.3852 -CONFIG_LEDS_TRIGGER_BACKLIGHT=m 77.3853 -CONFIG_LEDS_TRIGGER_GPIO=m 77.3854 -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m 77.3855 - 77.3856 -# 77.3857 -# iptables trigger is under Netfilter config (LED target) 77.3858 -# 77.3859 -CONFIG_ACCESSIBILITY=y 77.3860 -CONFIG_INFINIBAND=m 77.3861 -CONFIG_INFINIBAND_USER_MAD=m 77.3862 -CONFIG_INFINIBAND_USER_ACCESS=m 77.3863 -CONFIG_INFINIBAND_USER_MEM=y 77.3864 -CONFIG_INFINIBAND_ADDR_TRANS=y 77.3865 -CONFIG_INFINIBAND_MTHCA=m 77.3866 -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set 77.3867 -CONFIG_INFINIBAND_AMSO1100=m 77.3868 -# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set 77.3869 -CONFIG_INFINIBAND_CXGB3=m 77.3870 -# CONFIG_INFINIBAND_CXGB3_DEBUG is not set 77.3871 -# CONFIG_INFINIBAND_CXGB4 is not set 77.3872 -CONFIG_MLX4_INFINIBAND=m 77.3873 -CONFIG_INFINIBAND_NES=m 77.3874 -# CONFIG_INFINIBAND_NES_DEBUG is not set 77.3875 -CONFIG_INFINIBAND_IPOIB=m 77.3876 -CONFIG_INFINIBAND_IPOIB_CM=y 77.3877 -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set 77.3878 -CONFIG_INFINIBAND_SRP=m 77.3879 -CONFIG_INFINIBAND_ISER=m 77.3880 -CONFIG_EDAC=y 77.3881 - 77.3882 -# 77.3883 -# Reporting subsystems 77.3884 -# 77.3885 -# CONFIG_EDAC_DEBUG is not set 77.3886 -CONFIG_EDAC_MM_EDAC=m 77.3887 -CONFIG_EDAC_AMD76X=m 77.3888 -CONFIG_EDAC_E7XXX=m 77.3889 -CONFIG_EDAC_I82875P=m 77.3890 -CONFIG_EDAC_I82975X=m 77.3891 -CONFIG_EDAC_I3000=m 77.3892 -CONFIG_EDAC_I3200=m 77.3893 -CONFIG_EDAC_X38=m 77.3894 -CONFIG_EDAC_I5400=m 77.3895 -# CONFIG_EDAC_I7CORE is not set 77.3896 -CONFIG_EDAC_I82860=m 77.3897 -CONFIG_EDAC_R82600=m 77.3898 -CONFIG_EDAC_I5000=m 77.3899 -CONFIG_EDAC_I5100=m 77.3900 -# CONFIG_EDAC_I7300 is not set 77.3901 -CONFIG_RTC_LIB=m 77.3902 -CONFIG_RTC_CLASS=m 77.3903 - 77.3904 -# 77.3905 -# RTC interfaces 77.3906 -# 77.3907 -CONFIG_RTC_INTF_SYSFS=y 77.3908 -CONFIG_RTC_INTF_PROC=y 77.3909 -CONFIG_RTC_INTF_DEV=y 77.3910 -CONFIG_RTC_INTF_DEV_UIE_EMUL=y 77.3911 -# CONFIG_RTC_DRV_TEST is not set 77.3912 - 77.3913 -# 77.3914 -# I2C RTC drivers 77.3915 -# 77.3916 -CONFIG_RTC_DRV_DS1307=m 77.3917 -CONFIG_RTC_DRV_DS1374=m 77.3918 -CONFIG_RTC_DRV_DS1672=m 77.3919 -# CONFIG_RTC_DRV_DS3232 is not set 77.3920 -CONFIG_RTC_DRV_MAX6900=m 77.3921 -CONFIG_RTC_DRV_RS5C372=m 77.3922 -CONFIG_RTC_DRV_ISL1208=m 77.3923 -# CONFIG_RTC_DRV_ISL12022 is not set 77.3924 -CONFIG_RTC_DRV_X1205=m 77.3925 -CONFIG_RTC_DRV_PCF8563=m 77.3926 -CONFIG_RTC_DRV_PCF8583=m 77.3927 -CONFIG_RTC_DRV_M41T80=m 77.3928 -CONFIG_RTC_DRV_M41T80_WDT=y 77.3929 -CONFIG_RTC_DRV_BQ32K=m 77.3930 -CONFIG_RTC_DRV_S35390A=m 77.3931 -CONFIG_RTC_DRV_FM3130=m 77.3932 -CONFIG_RTC_DRV_RX8581=m 77.3933 -CONFIG_RTC_DRV_RX8025=m 77.3934 - 77.3935 -# 77.3936 -# SPI RTC drivers 77.3937 -# 77.3938 -CONFIG_RTC_DRV_M41T94=m 77.3939 -CONFIG_RTC_DRV_DS1305=m 77.3940 -CONFIG_RTC_DRV_DS1390=m 77.3941 -CONFIG_RTC_DRV_MAX6902=m 77.3942 -CONFIG_RTC_DRV_R9701=m 77.3943 -CONFIG_RTC_DRV_RS5C348=m 77.3944 -CONFIG_RTC_DRV_DS3234=m 77.3945 -CONFIG_RTC_DRV_PCF2123=m 77.3946 - 77.3947 -# 77.3948 -# Platform RTC drivers 77.3949 -# 77.3950 -CONFIG_RTC_DRV_CMOS=m 77.3951 -CONFIG_RTC_DRV_DS1286=m 77.3952 -CONFIG_RTC_DRV_DS1511=m 77.3953 -CONFIG_RTC_DRV_DS1553=m 77.3954 -CONFIG_RTC_DRV_DS1742=m 77.3955 -CONFIG_RTC_DRV_STK17TA8=m 77.3956 -CONFIG_RTC_DRV_M48T86=m 77.3957 -CONFIG_RTC_DRV_M48T35=m 77.3958 -CONFIG_RTC_DRV_M48T59=m 77.3959 -CONFIG_RTC_DRV_MSM6242=m 77.3960 -CONFIG_RTC_DRV_BQ4802=m 77.3961 -CONFIG_RTC_DRV_RP5C01=m 77.3962 -CONFIG_RTC_DRV_V3020=m 77.3963 -CONFIG_RTC_DRV_PCF50633=m 77.3964 - 77.3965 -# 77.3966 -# on-CPU RTC drivers 77.3967 -# 77.3968 -CONFIG_RTC_DRV_PCAP=m 77.3969 -CONFIG_DMADEVICES=y 77.3970 -# CONFIG_DMADEVICES_DEBUG is not set 77.3971 - 77.3972 -# 77.3973 -# DMA Devices 77.3974 -# 77.3975 -# CONFIG_INTEL_MID_DMAC is not set 77.3976 -CONFIG_INTEL_IOATDMA=m 77.3977 -# CONFIG_TIMB_DMA is not set 77.3978 -# CONFIG_PCH_DMA is not set 77.3979 -CONFIG_DMA_ENGINE=y 77.3980 - 77.3981 -# 77.3982 -# DMA Clients 77.3983 -# 77.3984 -CONFIG_NET_DMA=y 77.3985 -CONFIG_ASYNC_TX_DMA=y 77.3986 -# CONFIG_DMATEST is not set 77.3987 -CONFIG_DCA=m 77.3988 -CONFIG_AUXDISPLAY=y 77.3989 -CONFIG_KS0108=m 77.3990 -CONFIG_KS0108_PORT=0x378 77.3991 -CONFIG_KS0108_DELAY=2 77.3992 -CONFIG_CFAG12864B=m 77.3993 -CONFIG_CFAG12864B_RATE=20 77.3994 -CONFIG_UIO=m 77.3995 -CONFIG_UIO_CIF=m 77.3996 -CONFIG_UIO_PDRV=m 77.3997 -CONFIG_UIO_PDRV_GENIRQ=m 77.3998 -CONFIG_UIO_AEC=m 77.3999 -CONFIG_UIO_SERCOS3=m 77.4000 -CONFIG_UIO_PCI_GENERIC=m 77.4001 -CONFIG_UIO_NETX=m 77.4002 -CONFIG_STAGING=y 77.4003 -# CONFIG_STAGING_EXCLUDE_BUILD is not set 77.4004 -CONFIG_ET131X=m 77.4005 -CONFIG_ET131X_DEBUG=y 77.4006 -CONFIG_SLICOSS=m 77.4007 -CONFIG_VIDEO_GO7007=m 77.4008 -CONFIG_VIDEO_GO7007_USB=m 77.4009 -CONFIG_VIDEO_GO7007_OV7640=m 77.4010 -CONFIG_VIDEO_GO7007_SAA7113=m 77.4011 -CONFIG_VIDEO_GO7007_SAA7115=m 77.4012 -CONFIG_VIDEO_GO7007_TW9903=m 77.4013 -CONFIG_VIDEO_GO7007_UDA1342=m 77.4014 -CONFIG_VIDEO_GO7007_SONY_TUNER=m 77.4015 -CONFIG_VIDEO_GO7007_TW2804=m 77.4016 -CONFIG_VIDEO_CX25821=m 77.4017 -CONFIG_VIDEO_CX25821_ALSA=m 77.4018 -# CONFIG_VIDEO_TM6000 is not set 77.4019 -CONFIG_VIDEO_CPIA=m 77.4020 -CONFIG_VIDEO_CPIA_PP=m 77.4021 -# CONFIG_VIDEO_CPIA_USB is not set 77.4022 -CONFIG_VIDEO_STRADIS=m 77.4023 -CONFIG_USB_IP_COMMON=m 77.4024 -CONFIG_USB_IP_VHCI_HCD=m 77.4025 -CONFIG_USB_IP_HOST=m 77.4026 -# CONFIG_USB_IP_DEBUG_ENABLE is not set 77.4027 -CONFIG_W35UND=m 77.4028 -CONFIG_PRISM2_USB=m 77.4029 -CONFIG_ECHO=m 77.4030 -# CONFIG_BRCM80211 is not set 77.4031 -CONFIG_RT2860=m 77.4032 -CONFIG_RT2870=m 77.4033 -CONFIG_COMEDI=m 77.4034 -# CONFIG_COMEDI_DEBUG is not set 77.4035 -# CONFIG_COMEDI_MISC_DRIVERS is not set 77.4036 -# CONFIG_COMEDI_ISA_DRIVERS is not set 77.4037 -CONFIG_COMEDI_PCI_DRIVERS=m 77.4038 -# CONFIG_COMEDI_ADDI_APCI_035 is not set 77.4039 -# CONFIG_COMEDI_ADDI_APCI_1032 is not set 77.4040 -# CONFIG_COMEDI_ADDI_APCI_1500 is not set 77.4041 -# CONFIG_COMEDI_ADDI_APCI_1516 is not set 77.4042 -# CONFIG_COMEDI_ADDI_APCI_1564 is not set 77.4043 -# CONFIG_COMEDI_ADDI_APCI_16XX is not set 77.4044 -# CONFIG_COMEDI_ADDI_APCI_2016 is not set 77.4045 -# CONFIG_COMEDI_ADDI_APCI_2032 is not set 77.4046 -# CONFIG_COMEDI_ADDI_APCI_2200 is not set 77.4047 -# CONFIG_COMEDI_ADDI_APCI_3001 is not set 77.4048 -# CONFIG_COMEDI_ADDI_APCI_3120 is not set 77.4049 -# CONFIG_COMEDI_ADDI_APCI_3501 is not set 77.4050 -# CONFIG_COMEDI_ADDI_APCI_3XXX is not set 77.4051 -# CONFIG_COMEDI_ADL_PCI6208 is not set 77.4052 -# CONFIG_COMEDI_ADL_PCI7230 is not set 77.4053 -# CONFIG_COMEDI_ADL_PCI7296 is not set 77.4054 -# CONFIG_COMEDI_ADL_PCI7432 is not set 77.4055 -# CONFIG_COMEDI_ADL_PCI8164 is not set 77.4056 -# CONFIG_COMEDI_ADL_PCI9111 is not set 77.4057 -# CONFIG_COMEDI_ADL_PCI9118 is not set 77.4058 -# CONFIG_COMEDI_ADV_PCI1710 is not set 77.4059 -# CONFIG_COMEDI_ADV_PCI1723 is not set 77.4060 -# CONFIG_COMEDI_ADV_PCI_DIO is not set 77.4061 -# CONFIG_COMEDI_AMPLC_DIO200 is not set 77.4062 -# CONFIG_COMEDI_AMPLC_PC236 is not set 77.4063 -# CONFIG_COMEDI_AMPLC_PC263 is not set 77.4064 -# CONFIG_COMEDI_AMPLC_PCI224 is not set 77.4065 -# CONFIG_COMEDI_AMPLC_PCI230 is not set 77.4066 -# CONFIG_COMEDI_CONTEC_PCI_DIO is not set 77.4067 -# CONFIG_COMEDI_DT3000 is not set 77.4068 -# CONFIG_COMEDI_UNIOXX5 is not set 77.4069 -# CONFIG_COMEDI_GSC_HPDI is not set 77.4070 -# CONFIG_COMEDI_ICP_MULTI is not set 77.4071 -# CONFIG_COMEDI_II_PCI20KC is not set 77.4072 -# CONFIG_COMEDI_DAQBOARD2000 is not set 77.4073 -# CONFIG_COMEDI_JR3_PCI is not set 77.4074 -# CONFIG_COMEDI_KE_COUNTER is not set 77.4075 -# CONFIG_COMEDI_CB_PCIDAS64 is not set 77.4076 -# CONFIG_COMEDI_CB_PCIDAS is not set 77.4077 -# CONFIG_COMEDI_CB_PCIDDA is not set 77.4078 -# CONFIG_COMEDI_CB_PCIDIO is not set 77.4079 -# CONFIG_COMEDI_CB_PCIMDAS is not set 77.4080 -# CONFIG_COMEDI_CB_PCIMDDA is not set 77.4081 -# CONFIG_COMEDI_ME4000 is not set 77.4082 -# CONFIG_COMEDI_ME_DAQ is not set 77.4083 -# CONFIG_COMEDI_RTD520 is not set 77.4084 -# CONFIG_COMEDI_S526 is not set 77.4085 -# CONFIG_COMEDI_S626 is not set 77.4086 -# CONFIG_COMEDI_SSV_DNP is not set 77.4087 -CONFIG_COMEDI_USB_DRIVERS=m 77.4088 -# CONFIG_COMEDI_DT9812 is not set 77.4089 -# CONFIG_COMEDI_USBDUX is not set 77.4090 -# CONFIG_COMEDI_USBDUXFAST is not set 77.4091 -# CONFIG_COMEDI_VMK80XX is not set 77.4092 -# CONFIG_COMEDI_NI_COMMON is not set 77.4093 -# CONFIG_COMEDI_8255 is not set 77.4094 -# CONFIG_COMEDI_DAS08 is not set 77.4095 -# CONFIG_COMEDI_FC is not set 77.4096 -CONFIG_ASUS_OLED=m 77.4097 -CONFIG_PANEL=m 77.4098 -CONFIG_PANEL_PARPORT=0 77.4099 -CONFIG_PANEL_PROFILE=5 77.4100 -# CONFIG_PANEL_CHANGE_MESSAGE is not set 77.4101 -CONFIG_R8187SE=m 77.4102 -CONFIG_RTL8192U=m 77.4103 -CONFIG_RTL8192E=m 77.4104 -# CONFIG_R8712U is not set 77.4105 -CONFIG_TRANZPORT=m 77.4106 -CONFIG_POHMELFS=m 77.4107 -# CONFIG_POHMELFS_DEBUG is not set 77.4108 -# CONFIG_POHMELFS_CRYPTO is not set 77.4109 -CONFIG_AUTOFS_FS=m 77.4110 -CONFIG_IDE_PHISON=m 77.4111 -# CONFIG_LINE6_USB is not set 77.4112 -CONFIG_DRM_VMWGFX=m 77.4113 -CONFIG_DRM_NOUVEAU=m 77.4114 -CONFIG_DRM_NOUVEAU_BACKLIGHT=y 77.4115 - 77.4116 -# 77.4117 -# I2C encoder or helper chips 77.4118 -# 77.4119 -CONFIG_DRM_I2C_CH7006=m 77.4120 -CONFIG_DRM_I2C_SIL164=m 77.4121 -CONFIG_USB_SERIAL_QUATECH2=m 77.4122 -CONFIG_USB_SERIAL_QUATECH_USB2=m 77.4123 -CONFIG_VT6655=m 77.4124 -CONFIG_VT6656=m 77.4125 -CONFIG_FB_UDL=m 77.4126 -CONFIG_HYPERV=m 77.4127 -CONFIG_HYPERV_STORAGE=m 77.4128 -CONFIG_HYPERV_NET=m 77.4129 -CONFIG_HYPERV_UTILS=m 77.4130 -CONFIG_VME_BUS=m 77.4131 - 77.4132 -# 77.4133 -# VME Bridge Drivers 77.4134 -# 77.4135 -CONFIG_VME_CA91CX42=m 77.4136 -CONFIG_VME_TSI148=m 77.4137 - 77.4138 -# 77.4139 -# VME Device Drivers 77.4140 -# 77.4141 -CONFIG_VME_USER=m 77.4142 - 77.4143 -# 77.4144 -# VME Board Drivers 77.4145 -# 77.4146 -CONFIG_VMIVME_7805=m 77.4147 -CONFIG_IIO=m 77.4148 -CONFIG_IIO_RING_BUFFER=y 77.4149 -CONFIG_IIO_SW_RING=m 77.4150 -CONFIG_IIO_TRIGGER=y 77.4151 - 77.4152 -# 77.4153 -# Accelerometers 77.4154 -# 77.4155 -# CONFIG_ADIS16209 is not set 77.4156 -# CONFIG_ADIS16220 is not set 77.4157 -# CONFIG_ADIS16240 is not set 77.4158 -CONFIG_KXSD9=m 77.4159 -CONFIG_LIS3L02DQ=m 77.4160 -CONFIG_SCA3000=m 77.4161 - 77.4162 -# 77.4163 -# Analog to digital convertors 77.4164 -# 77.4165 -CONFIG_MAX1363=m 77.4166 -CONFIG_MAX1363_RING_BUFFER=y 77.4167 -# CONFIG_AD799X is not set 77.4168 -# CONFIG_AD7476 is not set 77.4169 - 77.4170 -# 77.4171 -# Digital gyroscope sensors 77.4172 -# 77.4173 -# CONFIG_ADIS16260 is not set 77.4174 - 77.4175 -# 77.4176 -# Inertial measurement units 77.4177 -# 77.4178 -# CONFIG_ADIS16300 is not set 77.4179 -# CONFIG_ADIS16350 is not set 77.4180 -# CONFIG_ADIS16400 is not set 77.4181 - 77.4182 -# 77.4183 -# Light sensors 77.4184 -# 77.4185 -CONFIG_SENSORS_TSL2563=m 77.4186 -# CONFIG_SENSORS_ISL29018 is not set 77.4187 - 77.4188 -# 77.4189 -# Magnetometer sensors 77.4190 -# 77.4191 -# CONFIG_SENSORS_AK8975 is not set 77.4192 -# CONFIG_SENSORS_HMC5843 is not set 77.4193 - 77.4194 -# 77.4195 -# Triggers - standalone 77.4196 -# 77.4197 -CONFIG_IIO_PERIODIC_RTC_TRIGGER=m 77.4198 -CONFIG_IIO_GPIO_TRIGGER=m 77.4199 -# CONFIG_ZRAM is not set 77.4200 -CONFIG_BATMAN_ADV=m 77.4201 -# CONFIG_BATMAN_ADV_DEBUG is not set 77.4202 -CONFIG_SAMSUNG_LAPTOP=m 77.4203 -CONFIG_FB_SM7XX=m 77.4204 -# CONFIG_VIDEO_DT3155 is not set 77.4205 -CONFIG_CRYSTALHD=m 77.4206 -# CONFIG_CXT1E1 is not set 77.4207 - 77.4208 -# 77.4209 -# Texas Instruments shared transport line discipline 77.4210 -# 77.4211 -# CONFIG_ST_BT is not set 77.4212 -# CONFIG_ADIS16255 is not set 77.4213 -# CONFIG_FB_XGI is not set 77.4214 -# CONFIG_LIRC_STAGING is not set 77.4215 -CONFIG_SMB_FS=m 77.4216 -CONFIG_SMB_NLS_DEFAULT=y 77.4217 -CONFIG_SMB_NLS_REMOTE="cp437" 77.4218 -# CONFIG_EASYCAP is not set 77.4219 -# CONFIG_SOLO6X10 is not set 77.4220 -CONFIG_MACH_NO_WESTBRIDGE=y 77.4221 -# CONFIG_SBE_2T3E3 is not set 77.4222 -# CONFIG_ATH6K_LEGACY is not set 77.4223 -# CONFIG_USB_ENESTORAGE is not set 77.4224 -# CONFIG_BCM_WIMAX is not set 77.4225 -# CONFIG_FT1000 is not set 77.4226 - 77.4227 -# 77.4228 -# Speakup console speech 77.4229 -# 77.4230 -# CONFIG_SPEAKUP is not set 77.4231 -CONFIG_X86_PLATFORM_DEVICES=y 77.4232 -CONFIG_SENSORS_HDAPS=m 77.4233 -# CONFIG_IBM_RTL is not set 77.4234 - 77.4235 -# 77.4236 -# Firmware Drivers 77.4237 -# 77.4238 -# CONFIG_EDD is not set 77.4239 -# CONFIG_FIRMWARE_MEMMAP is not set 77.4240 -# CONFIG_DELL_RBU is not set 77.4241 -# CONFIG_DCDBAS is not set 77.4242 -# CONFIG_ISCSI_IBFT_FIND is not set 77.4243 - 77.4244 -# 77.4245 -# File systems 77.4246 -# 77.4247 -CONFIG_EXT2_FS=m 77.4248 -CONFIG_EXT2_FS_XATTR=y 77.4249 -CONFIG_EXT2_FS_POSIX_ACL=y 77.4250 -CONFIG_EXT2_FS_SECURITY=y 77.4251 -CONFIG_EXT2_FS_XIP=y 77.4252 -CONFIG_EXT3_FS=m 77.4253 -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set 77.4254 -CONFIG_EXT3_FS_XATTR=y 77.4255 -CONFIG_EXT3_FS_POSIX_ACL=y 77.4256 -CONFIG_EXT3_FS_SECURITY=y 77.4257 -CONFIG_EXT4_FS=m 77.4258 -CONFIG_EXT4_FS_XATTR=y 77.4259 -CONFIG_EXT4_FS_POSIX_ACL=y 77.4260 -CONFIG_EXT4_FS_SECURITY=y 77.4261 -# CONFIG_EXT4_DEBUG is not set 77.4262 -CONFIG_FS_XIP=y 77.4263 -CONFIG_JBD=m 77.4264 -CONFIG_JBD2=m 77.4265 -CONFIG_FS_MBCACHE=m 77.4266 -CONFIG_REISERFS_FS=m 77.4267 -# CONFIG_REISERFS_CHECK is not set 77.4268 -# CONFIG_REISERFS_PROC_INFO is not set 77.4269 -CONFIG_REISERFS_FS_XATTR=y 77.4270 -CONFIG_REISERFS_FS_POSIX_ACL=y 77.4271 -CONFIG_REISERFS_FS_SECURITY=y 77.4272 -CONFIG_JFS_FS=m 77.4273 -CONFIG_JFS_POSIX_ACL=y 77.4274 -CONFIG_JFS_SECURITY=y 77.4275 -# CONFIG_JFS_DEBUG is not set 77.4276 -# CONFIG_JFS_STATISTICS is not set 77.4277 -CONFIG_FS_POSIX_ACL=y 77.4278 -CONFIG_XFS_FS=m 77.4279 -CONFIG_XFS_QUOTA=y 77.4280 -CONFIG_XFS_POSIX_ACL=y 77.4281 -CONFIG_XFS_RT=y 77.4282 -# CONFIG_XFS_DEBUG is not set 77.4283 -# CONFIG_OCFS2_FS is not set 77.4284 -CONFIG_BTRFS_FS=m 77.4285 -CONFIG_BTRFS_FS_POSIX_ACL=y 77.4286 -CONFIG_NILFS2_FS=m 77.4287 -CONFIG_EXPORTFS=m 77.4288 -CONFIG_FILE_LOCKING=y 77.4289 -CONFIG_FSNOTIFY=y 77.4290 -CONFIG_DNOTIFY=y 77.4291 -CONFIG_INOTIFY_USER=y 77.4292 -# CONFIG_FANOTIFY is not set 77.4293 -CONFIG_QUOTA=y 77.4294 -CONFIG_QUOTA_NETLINK_INTERFACE=y 77.4295 -CONFIG_PRINT_QUOTA_WARNING=y 77.4296 -CONFIG_QUOTA_DEBUG=y 77.4297 -CONFIG_QUOTA_TREE=m 77.4298 -# CONFIG_QFMT_V1 is not set 77.4299 -CONFIG_QFMT_V2=m 77.4300 -CONFIG_QUOTACTL=y 77.4301 -CONFIG_AUTOFS4_FS=m 77.4302 -CONFIG_FUSE_FS=m 77.4303 -CONFIG_CUSE=m 77.4304 - 77.4305 -# 77.4306 -# Caches 77.4307 -# 77.4308 -CONFIG_FSCACHE=m 77.4309 -# CONFIG_FSCACHE_STATS is not set 77.4310 -# CONFIG_FSCACHE_HISTOGRAM is not set 77.4311 -# CONFIG_FSCACHE_DEBUG is not set 77.4312 -# CONFIG_FSCACHE_OBJECT_LIST is not set 77.4313 -CONFIG_CACHEFILES=m 77.4314 -# CONFIG_CACHEFILES_DEBUG is not set 77.4315 -CONFIG_CACHEFILES_HISTOGRAM=y 77.4316 - 77.4317 -# 77.4318 -# CD-ROM/DVD Filesystems 77.4319 -# 77.4320 -CONFIG_ISO9660_FS=m 77.4321 -CONFIG_JOLIET=y 77.4322 -CONFIG_ZISOFS=y 77.4323 -CONFIG_UDF_FS=m 77.4324 -CONFIG_UDF_NLS=y 77.4325 - 77.4326 -# 77.4327 -# DOS/FAT/NT Filesystems 77.4328 -# 77.4329 -CONFIG_FAT_FS=m 77.4330 -CONFIG_MSDOS_FS=m 77.4331 -CONFIG_VFAT_FS=m 77.4332 -CONFIG_FAT_DEFAULT_CODEPAGE=437 77.4333 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" 77.4334 -CONFIG_NTFS_FS=m 77.4335 -# CONFIG_NTFS_DEBUG is not set 77.4336 -# CONFIG_NTFS_RW is not set 77.4337 - 77.4338 -# 77.4339 -# Pseudo filesystems 77.4340 -# 77.4341 -CONFIG_PROC_FS=y 77.4342 -# CONFIG_PROC_KCORE is not set 77.4343 -CONFIG_PROC_SYSCTL=y 77.4344 -# CONFIG_PROC_PAGE_MONITOR is not set 77.4345 -CONFIG_SYSFS=y 77.4346 -# CONFIG_HUGETLBFS is not set 77.4347 -# CONFIG_HUGETLB_PAGE is not set 77.4348 -CONFIG_CONFIGFS_FS=m 77.4349 -CONFIG_MISC_FILESYSTEMS=y 77.4350 -CONFIG_ADFS_FS=m 77.4351 -# CONFIG_ADFS_FS_RW is not set 77.4352 -CONFIG_AFFS_FS=m 77.4353 -# CONFIG_ECRYPT_FS is not set 77.4354 -CONFIG_HFS_FS=m 77.4355 -CONFIG_HFSPLUS_FS=m 77.4356 -CONFIG_BEFS_FS=m 77.4357 -# CONFIG_BEFS_DEBUG is not set 77.4358 -CONFIG_BFS_FS=m 77.4359 -CONFIG_EFS_FS=m 77.4360 -CONFIG_JFFS2_FS=m 77.4361 -CONFIG_JFFS2_FS_DEBUG=0 77.4362 -CONFIG_JFFS2_FS_WRITEBUFFER=y 77.4363 -CONFIG_JFFS2_FS_WBUF_VERIFY=y 77.4364 -# CONFIG_JFFS2_SUMMARY is not set 77.4365 -CONFIG_JFFS2_FS_XATTR=y 77.4366 -# CONFIG_JFFS2_FS_POSIX_ACL is not set 77.4367 -# CONFIG_JFFS2_FS_SECURITY is not set 77.4368 -CONFIG_JFFS2_COMPRESSION_OPTIONS=y 77.4369 -CONFIG_JFFS2_ZLIB=y 77.4370 -CONFIG_JFFS2_LZO=y 77.4371 -CONFIG_JFFS2_RTIME=y 77.4372 -CONFIG_JFFS2_RUBIN=y 77.4373 -# CONFIG_JFFS2_CMODE_NONE is not set 77.4374 -CONFIG_JFFS2_CMODE_PRIORITY=y 77.4375 -# CONFIG_JFFS2_CMODE_SIZE is not set 77.4376 -# CONFIG_JFFS2_CMODE_FAVOURLZO is not set 77.4377 -CONFIG_UBIFS_FS=m 77.4378 -CONFIG_UBIFS_FS_XATTR=y 77.4379 -CONFIG_UBIFS_FS_ADVANCED_COMPR=y 77.4380 -CONFIG_UBIFS_FS_LZO=y 77.4381 -CONFIG_UBIFS_FS_ZLIB=y 77.4382 -# CONFIG_UBIFS_FS_DEBUG is not set 77.4383 -CONFIG_LOGFS=m 77.4384 -CONFIG_CRAMFS=m 77.4385 -CONFIG_SQUASHFS=m 77.4386 -# CONFIG_SQUASHFS_XATTR is not set 77.4387 -# CONFIG_SQUASHFS_LZO is not set 77.4388 -# CONFIG_SQUASHFS_XZ is not set 77.4389 -# CONFIG_SQUASHFS_EMBEDDED is not set 77.4390 -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 77.4391 -CONFIG_VXFS_FS=m 77.4392 -CONFIG_MINIX_FS=m 77.4393 -CONFIG_OMFS_FS=m 77.4394 -CONFIG_HPFS_FS=m 77.4395 -CONFIG_QNX4FS_FS=m 77.4396 -CONFIG_ROMFS_FS=m 77.4397 -CONFIG_ROMFS_BACKED_BY_BLOCK=y 77.4398 -# CONFIG_ROMFS_BACKED_BY_MTD is not set 77.4399 -# CONFIG_ROMFS_BACKED_BY_BOTH is not set 77.4400 -CONFIG_ROMFS_ON_BLOCK=y 77.4401 -CONFIG_SYSV_FS=m 77.4402 -CONFIG_UFS_FS=m 77.4403 -# CONFIG_UFS_FS_WRITE is not set 77.4404 -# CONFIG_UFS_DEBUG is not set 77.4405 -CONFIG_EXOFS_FS=m 77.4406 -# CONFIG_EXOFS_DEBUG is not set 77.4407 -CONFIG_NETWORK_FILESYSTEMS=y 77.4408 -CONFIG_NFS_FS=m 77.4409 -CONFIG_NFS_V3=y 77.4410 -CONFIG_NFS_V3_ACL=y 77.4411 -# CONFIG_NFS_V4 is not set 77.4412 -CONFIG_NFS_FSCACHE=y 77.4413 -CONFIG_NFSD=m 77.4414 -CONFIG_NFSD_DEPRECATED=y 77.4415 -CONFIG_NFSD_V2_ACL=y 77.4416 -CONFIG_NFSD_V3=y 77.4417 -CONFIG_NFSD_V3_ACL=y 77.4418 -# CONFIG_NFSD_V4 is not set 77.4419 -CONFIG_LOCKD=m 77.4420 -CONFIG_LOCKD_V4=y 77.4421 -CONFIG_NFS_ACL_SUPPORT=m 77.4422 -CONFIG_NFS_COMMON=y 77.4423 -CONFIG_SUNRPC=m 77.4424 -CONFIG_SUNRPC_GSS=m 77.4425 -CONFIG_SUNRPC_XPRT_RDMA=m 77.4426 -CONFIG_RPCSEC_GSS_KRB5=m 77.4427 -CONFIG_CEPH_FS=m 77.4428 -CONFIG_CIFS=m 77.4429 -CONFIG_CIFS_STATS=y 77.4430 -CONFIG_CIFS_STATS2=y 77.4431 -CONFIG_CIFS_WEAK_PW_HASH=y 77.4432 -# CONFIG_CIFS_UPCALL is not set 77.4433 -CONFIG_CIFS_XATTR=y 77.4434 -CONFIG_CIFS_POSIX=y 77.4435 -# CONFIG_CIFS_DEBUG2 is not set 77.4436 -# CONFIG_CIFS_DFS_UPCALL is not set 77.4437 -# CONFIG_CIFS_FSCACHE is not set 77.4438 -# CONFIG_CIFS_ACL is not set 77.4439 -CONFIG_CIFS_EXPERIMENTAL=y 77.4440 -CONFIG_NCP_FS=m 77.4441 -CONFIG_NCPFS_PACKET_SIGNING=y 77.4442 -CONFIG_NCPFS_IOCTL_LOCKING=y 77.4443 -CONFIG_NCPFS_STRONG=y 77.4444 -CONFIG_NCPFS_NFS_NS=y 77.4445 -CONFIG_NCPFS_OS2_NS=y 77.4446 -CONFIG_NCPFS_SMALLDOS=y 77.4447 -CONFIG_NCPFS_NLS=y 77.4448 -CONFIG_NCPFS_EXTRAS=y 77.4449 -CONFIG_CODA_FS=m 77.4450 -CONFIG_AFS_FS=m 77.4451 -# CONFIG_AFS_DEBUG is not set 77.4452 -CONFIG_AFS_FSCACHE=y 77.4453 - 77.4454 -# 77.4455 -# Partition Types 77.4456 -# 77.4457 -# CONFIG_PARTITION_ADVANCED is not set 77.4458 -CONFIG_MSDOS_PARTITION=y 77.4459 -CONFIG_NLS=m 77.4460 -CONFIG_NLS_DEFAULT="iso8859-1" 77.4461 -CONFIG_NLS_CODEPAGE_437=m 77.4462 -CONFIG_NLS_CODEPAGE_737=m 77.4463 -CONFIG_NLS_CODEPAGE_775=m 77.4464 -CONFIG_NLS_CODEPAGE_850=m 77.4465 -CONFIG_NLS_CODEPAGE_852=m 77.4466 -CONFIG_NLS_CODEPAGE_855=m 77.4467 -CONFIG_NLS_CODEPAGE_857=m 77.4468 -CONFIG_NLS_CODEPAGE_860=m 77.4469 -CONFIG_NLS_CODEPAGE_861=m 77.4470 -CONFIG_NLS_CODEPAGE_862=m 77.4471 -CONFIG_NLS_CODEPAGE_863=m 77.4472 -CONFIG_NLS_CODEPAGE_864=m 77.4473 -CONFIG_NLS_CODEPAGE_865=m 77.4474 -CONFIG_NLS_CODEPAGE_866=m 77.4475 -CONFIG_NLS_CODEPAGE_869=m 77.4476 -CONFIG_NLS_CODEPAGE_936=m 77.4477 -CONFIG_NLS_CODEPAGE_950=m 77.4478 -CONFIG_NLS_CODEPAGE_932=m 77.4479 -CONFIG_NLS_CODEPAGE_949=m 77.4480 -CONFIG_NLS_CODEPAGE_874=m 77.4481 -CONFIG_NLS_ISO8859_8=m 77.4482 -CONFIG_NLS_CODEPAGE_1250=m 77.4483 -CONFIG_NLS_CODEPAGE_1251=m 77.4484 -CONFIG_NLS_ASCII=m 77.4485 -CONFIG_NLS_ISO8859_1=m 77.4486 -CONFIG_NLS_ISO8859_2=m 77.4487 -CONFIG_NLS_ISO8859_3=m 77.4488 -CONFIG_NLS_ISO8859_4=m 77.4489 -CONFIG_NLS_ISO8859_5=m 77.4490 -CONFIG_NLS_ISO8859_6=m 77.4491 -CONFIG_NLS_ISO8859_7=m 77.4492 -CONFIG_NLS_ISO8859_9=m 77.4493 -CONFIG_NLS_ISO8859_13=m 77.4494 -CONFIG_NLS_ISO8859_14=m 77.4495 -CONFIG_NLS_ISO8859_15=m 77.4496 -CONFIG_NLS_KOI8_R=m 77.4497 -CONFIG_NLS_KOI8_U=m 77.4498 -CONFIG_NLS_UTF8=m 77.4499 -CONFIG_DLM=m 77.4500 -# CONFIG_DLM_DEBUG is not set 77.4501 - 77.4502 -# 77.4503 -# Kernel hacking 77.4504 -# 77.4505 -CONFIG_TRACE_IRQFLAGS_SUPPORT=y 77.4506 -# CONFIG_PRINTK_TIME is not set 77.4507 -# CONFIG_ENABLE_WARN_DEPRECATED is not set 77.4508 -# CONFIG_ENABLE_MUST_CHECK is not set 77.4509 -CONFIG_FRAME_WARN=1024 77.4510 -# CONFIG_MAGIC_SYSRQ is not set 77.4511 -# CONFIG_STRIP_ASM_SYMS is not set 77.4512 -# CONFIG_UNUSED_SYMBOLS is not set 77.4513 -# CONFIG_DEBUG_FS is not set 77.4514 -# CONFIG_HEADERS_CHECK is not set 77.4515 -# CONFIG_DEBUG_KERNEL is not set 77.4516 -# CONFIG_HARDLOCKUP_DETECTOR is not set 77.4517 -CONFIG_BKL=y 77.4518 -# CONFIG_SPARSE_RCU_POINTER is not set 77.4519 -# CONFIG_DEBUG_MEMORY_INIT is not set 77.4520 -CONFIG_ARCH_WANT_FRAME_POINTERS=y 77.4521 -# CONFIG_FRAME_POINTER is not set 77.4522 -# CONFIG_SYSCTL_SYSCALL_CHECK is not set 77.4523 -CONFIG_USER_STACKTRACE_SUPPORT=y 77.4524 -CONFIG_HAVE_FUNCTION_TRACER=y 77.4525 -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y 77.4526 -CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y 77.4527 -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y 77.4528 -CONFIG_HAVE_DYNAMIC_FTRACE=y 77.4529 -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y 77.4530 -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y 77.4531 -CONFIG_HAVE_C_RECORDMCOUNT=y 77.4532 -CONFIG_TRACING_SUPPORT=y 77.4533 -# CONFIG_FTRACE is not set 77.4534 -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set 77.4535 -# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set 77.4536 -# CONFIG_DMA_API_DEBUG is not set 77.4537 -# CONFIG_ATOMIC64_SELFTEST is not set 77.4538 -CONFIG_ASYNC_RAID6_TEST=m 77.4539 -# CONFIG_SAMPLES is not set 77.4540 -CONFIG_HAVE_ARCH_KGDB=y 77.4541 -CONFIG_HAVE_ARCH_KMEMCHECK=y 77.4542 -# CONFIG_STRICT_DEVMEM is not set 77.4543 -# CONFIG_X86_VERBOSE_BOOTUP is not set 77.4544 -# CONFIG_EARLY_PRINTK is not set 77.4545 -# CONFIG_DOUBLEFAULT is not set 77.4546 -# CONFIG_IOMMU_STRESS is not set 77.4547 -CONFIG_HAVE_MMIOTRACE_SUPPORT=y 77.4548 -CONFIG_IO_DELAY_TYPE_0X80=0 77.4549 -CONFIG_IO_DELAY_TYPE_0XED=1 77.4550 -CONFIG_IO_DELAY_TYPE_UDELAY=2 77.4551 -CONFIG_IO_DELAY_TYPE_NONE=3 77.4552 -CONFIG_IO_DELAY_0X80=y 77.4553 -# CONFIG_IO_DELAY_0XED is not set 77.4554 -# CONFIG_IO_DELAY_UDELAY is not set 77.4555 -# CONFIG_IO_DELAY_NONE is not set 77.4556 -CONFIG_DEFAULT_IO_DELAY_TYPE=0 77.4557 -CONFIG_OPTIMIZE_INLINING=y 77.4558 - 77.4559 -# 77.4560 -# Security options 77.4561 -# 77.4562 -CONFIG_KEYS=y 77.4563 -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set 77.4564 -# CONFIG_SECURITY_DMESG_RESTRICT is not set 77.4565 -# CONFIG_SECURITY is not set 77.4566 -CONFIG_SECURITYFS=y 77.4567 -CONFIG_DEFAULT_SECURITY_DAC=y 77.4568 -CONFIG_DEFAULT_SECURITY="" 77.4569 -CONFIG_XOR_BLOCKS=m 77.4570 -CONFIG_ASYNC_CORE=m 77.4571 -CONFIG_ASYNC_MEMCPY=m 77.4572 -CONFIG_ASYNC_XOR=m 77.4573 -CONFIG_ASYNC_PQ=m 77.4574 -CONFIG_ASYNC_RAID6_RECOV=m 77.4575 -CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y 77.4576 -CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y 77.4577 -CONFIG_CRYPTO=y 77.4578 - 77.4579 -# 77.4580 -# Crypto core or helper 77.4581 -# 77.4582 -CONFIG_CRYPTO_ALGAPI=m 77.4583 -CONFIG_CRYPTO_ALGAPI2=m 77.4584 -CONFIG_CRYPTO_AEAD=m 77.4585 -CONFIG_CRYPTO_AEAD2=m 77.4586 -CONFIG_CRYPTO_BLKCIPHER=m 77.4587 -CONFIG_CRYPTO_BLKCIPHER2=m 77.4588 -CONFIG_CRYPTO_HASH=m 77.4589 -CONFIG_CRYPTO_HASH2=m 77.4590 -CONFIG_CRYPTO_RNG=m 77.4591 -CONFIG_CRYPTO_RNG2=m 77.4592 -CONFIG_CRYPTO_PCOMP=m 77.4593 -CONFIG_CRYPTO_PCOMP2=m 77.4594 -CONFIG_CRYPTO_MANAGER=m 77.4595 -CONFIG_CRYPTO_MANAGER2=m 77.4596 -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y 77.4597 -CONFIG_CRYPTO_GF128MUL=m 77.4598 -CONFIG_CRYPTO_NULL=m 77.4599 -CONFIG_CRYPTO_WORKQUEUE=m 77.4600 -CONFIG_CRYPTO_CRYPTD=m 77.4601 -CONFIG_CRYPTO_AUTHENC=m 77.4602 -# CONFIG_CRYPTO_TEST is not set 77.4603 - 77.4604 -# 77.4605 -# Authenticated Encryption with Associated Data 77.4606 -# 77.4607 -CONFIG_CRYPTO_CCM=m 77.4608 -CONFIG_CRYPTO_GCM=m 77.4609 -CONFIG_CRYPTO_SEQIV=m 77.4610 - 77.4611 -# 77.4612 -# Block modes 77.4613 -# 77.4614 -CONFIG_CRYPTO_CBC=m 77.4615 -CONFIG_CRYPTO_CTR=m 77.4616 -CONFIG_CRYPTO_CTS=m 77.4617 -CONFIG_CRYPTO_ECB=m 77.4618 -CONFIG_CRYPTO_LRW=m 77.4619 -CONFIG_CRYPTO_PCBC=m 77.4620 -CONFIG_CRYPTO_XTS=m 77.4621 - 77.4622 -# 77.4623 -# Hash modes 77.4624 -# 77.4625 -CONFIG_CRYPTO_HMAC=m 77.4626 -CONFIG_CRYPTO_XCBC=m 77.4627 -CONFIG_CRYPTO_VMAC=m 77.4628 - 77.4629 -# 77.4630 -# Digest 77.4631 -# 77.4632 -CONFIG_CRYPTO_CRC32C=m 77.4633 -CONFIG_CRYPTO_CRC32C_INTEL=m 77.4634 -CONFIG_CRYPTO_GHASH=m 77.4635 -CONFIG_CRYPTO_MD4=m 77.4636 -CONFIG_CRYPTO_MD5=m 77.4637 -CONFIG_CRYPTO_MICHAEL_MIC=m 77.4638 -CONFIG_CRYPTO_RMD128=m 77.4639 -CONFIG_CRYPTO_RMD160=m 77.4640 -CONFIG_CRYPTO_RMD256=m 77.4641 -CONFIG_CRYPTO_RMD320=m 77.4642 -CONFIG_CRYPTO_SHA1=m 77.4643 -CONFIG_CRYPTO_SHA256=m 77.4644 -CONFIG_CRYPTO_SHA512=m 77.4645 -CONFIG_CRYPTO_TGR192=m 77.4646 -CONFIG_CRYPTO_WP512=m 77.4647 - 77.4648 -# 77.4649 -# Ciphers 77.4650 -# 77.4651 -CONFIG_CRYPTO_AES=m 77.4652 -CONFIG_CRYPTO_AES_586=m 77.4653 -CONFIG_CRYPTO_ANUBIS=m 77.4654 -CONFIG_CRYPTO_ARC4=m 77.4655 -CONFIG_CRYPTO_BLOWFISH=m 77.4656 -CONFIG_CRYPTO_CAMELLIA=m 77.4657 -CONFIG_CRYPTO_CAST5=m 77.4658 -CONFIG_CRYPTO_CAST6=m 77.4659 -CONFIG_CRYPTO_DES=m 77.4660 -CONFIG_CRYPTO_FCRYPT=m 77.4661 -CONFIG_CRYPTO_KHAZAD=m 77.4662 -CONFIG_CRYPTO_SALSA20=m 77.4663 -CONFIG_CRYPTO_SALSA20_586=m 77.4664 -CONFIG_CRYPTO_SEED=m 77.4665 -CONFIG_CRYPTO_SERPENT=m 77.4666 -CONFIG_CRYPTO_TEA=m 77.4667 -CONFIG_CRYPTO_TWOFISH=m 77.4668 -CONFIG_CRYPTO_TWOFISH_COMMON=m 77.4669 -CONFIG_CRYPTO_TWOFISH_586=m 77.4670 - 77.4671 -# 77.4672 -# Compression 77.4673 -# 77.4674 -CONFIG_CRYPTO_DEFLATE=m 77.4675 -CONFIG_CRYPTO_ZLIB=m 77.4676 -CONFIG_CRYPTO_LZO=m 77.4677 - 77.4678 -# 77.4679 -# Random Number Generation 77.4680 -# 77.4681 -CONFIG_CRYPTO_ANSI_CPRNG=m 77.4682 -CONFIG_CRYPTO_HW=y 77.4683 -# CONFIG_CRYPTO_DEV_PADLOCK is not set 77.4684 -# CONFIG_CRYPTO_DEV_GEODE is not set 77.4685 -# CONFIG_CRYPTO_DEV_HIFN_795X is not set 77.4686 -CONFIG_HAVE_KVM=y 77.4687 -CONFIG_HAVE_KVM_IRQCHIP=y 77.4688 -CONFIG_HAVE_KVM_EVENTFD=y 77.4689 -CONFIG_KVM_APIC_ARCHITECTURE=y 77.4690 -CONFIG_KVM_MMIO=y 77.4691 -CONFIG_VIRTUALIZATION=y 77.4692 -CONFIG_KVM=m 77.4693 -CONFIG_KVM_INTEL=m 77.4694 -CONFIG_KVM_AMD=m 77.4695 -CONFIG_VHOST_NET=m 77.4696 -CONFIG_LGUEST=m 77.4697 -CONFIG_VIRTIO=m 77.4698 -CONFIG_VIRTIO_RING=m 77.4699 -CONFIG_VIRTIO_PCI=m 77.4700 -CONFIG_VIRTIO_BALLOON=m 77.4701 -# CONFIG_BINARY_PRINTF is not set 77.4702 - 77.4703 -# 77.4704 -# Library routines 77.4705 -# 77.4706 -CONFIG_RAID6_PQ=m 77.4707 -CONFIG_BITREVERSE=y 77.4708 -CONFIG_GENERIC_FIND_FIRST_BIT=y 77.4709 -CONFIG_GENERIC_FIND_NEXT_BIT=y 77.4710 -CONFIG_GENERIC_FIND_LAST_BIT=y 77.4711 -CONFIG_CRC_CCITT=y 77.4712 -CONFIG_CRC16=m 77.4713 -CONFIG_CRC_T10DIF=m 77.4714 -CONFIG_CRC_ITU_T=m 77.4715 -CONFIG_CRC32=y 77.4716 -CONFIG_CRC7=m 77.4717 -CONFIG_LIBCRC32C=m 77.4718 -CONFIG_ZLIB_INFLATE=m 77.4719 -CONFIG_ZLIB_DEFLATE=m 77.4720 -CONFIG_LZO_COMPRESS=m 77.4721 -CONFIG_LZO_DECOMPRESS=m 77.4722 -# CONFIG_XZ_DEC is not set 77.4723 -# CONFIG_XZ_DEC_BCJ is not set 77.4724 -CONFIG_DECOMPRESS_LZMA=y 77.4725 -CONFIG_GENERIC_ALLOCATOR=y 77.4726 -CONFIG_REED_SOLOMON=m 77.4727 -CONFIG_REED_SOLOMON_DEC16=y 77.4728 -CONFIG_TEXTSEARCH=y 77.4729 -CONFIG_TEXTSEARCH_KMP=m 77.4730 -CONFIG_TEXTSEARCH_BM=m 77.4731 -CONFIG_TEXTSEARCH_FSM=m 77.4732 -CONFIG_BTREE=y 77.4733 -CONFIG_HAS_IOMEM=y 77.4734 -CONFIG_HAS_IOPORT=y 77.4735 -CONFIG_HAS_DMA=y 77.4736 -CONFIG_CHECK_SIGNATURE=y 77.4737 -CONFIG_NLATTR=y 77.4738 -CONFIG_LRU_CACHE=m
78.1 --- a/kernel-modular/stuff/linux-diff-2.6.37.u Thu Jul 18 13:24:21 2013 +0000 78.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 78.3 @@ -1,40 +0,0 @@ 78.4 ---- linux-2.6.30.6/arch/x86/vdso/Makefile 78.5 -+++ linux-2.6.30.6/arch/x86/vdso/Makefile 78.6 -@@ -104,10 +104,12 @@ 78.7 - $(foreach H,$(filter-out FORCE,$^),\ 78.8 - if grep -q VDSO32_SYSENTER_RETURN $H; \ 78.9 - then diff -u $(@D)/.tmp_$(@F) $H; \ 78.10 -- else sed /VDSO32_SYSENTER_RETURN/d $(@D)/.tmp_$(@F) | \ 78.11 -- diff -u - $H; fi &&) : ;\ 78.12 -+ else sed /VDSO32_SYSENTER_RETURN/d $(@D)/.tmp_$(@F) > \ 78.13 -+ $(@D)/.tmp_$(@F).$$ ; \ 78.14 -+ diff -u $(@D)/.tmp_$(@F).$$ $H; fi &&) : ;\ 78.15 - then mv -f $(@D)/.tmp_$(@F) $@; \ 78.16 -- else rm -f $(@D)/.tmp_$(@F); exit 1; \ 78.17 -+ else rm -f $(@D)/.tmp_$(@F)*; exit 1; \ 78.18 -+ rm -f $(@D)/.tmp_$(@F)*; \ 78.19 - fi 78.20 - endef 78.21 - 78.22 - 78.23 ---- linux-2.6.34/scripts/Makefile.lib 78.24 -+++ linux-2.6.34/scripts/Makefile.lib 78.25 -@@ -204,7 +204,8 @@ 78.26 - # --------------------------------------------------------------------------- 78.27 - 78.28 - quiet_cmd_gzip = GZIP $@ 78.29 --cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \ 78.30 -+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) && \ 78.31 -+ ( which advdef > /dev/null && advdef -z $@ ; true ) || \ 78.32 - (rm -f $@ ; false) 78.33 - 78.34 - 78.35 -@@ -238,7 +239,7 @@ 78.36 - 78.37 - quiet_cmd_lzma = LZMA $@ 78.38 - cmd_lzma = (cat $(filter-out FORCE,$^) | \ 78.39 -- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 78.40 -+ lzma e -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 78.41 - (rm -f $@ ; false) 78.42 - 78.43 - quiet_cmd_lzo = LZO $@
79.1 --- a/kernel-modular/stuff/linux-freeinitrd-2.6.37.u Thu Jul 18 13:24:21 2013 +0000 79.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 79.3 @@ -1,129 +0,0 @@ 79.4 ---- linux-2.6.30.4/arch/x86/mm/init.c 79.5 -+++ linux-2.6.30.4/arch/x86/mm/init.c 79.6 -@@ -366,7 +366,7 @@ 79.7 - */ 79.8 - set_memory_rw(begin, (end - begin) >> PAGE_SHIFT); 79.9 - 79.10 -- printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10); 79.11 -+ if (what) printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10); 79.12 - 79.13 - for (; addr < end; addr += PAGE_SIZE) { 79.14 - ClearPageReserved(virt_to_page(addr)); 79.15 - 79.16 ---- linux-2.6.30.4/init/initramfs.c 79.17 -+++ linux-2.6.30.4/init/initramfs.c 79.18 -@@ -374,6 +374,52 @@ 79.19 - [Reset] = do_reset, 79.20 - }; 79.21 - 79.22 -+#include <linux/initrd.h> 79.23 -+#define INITRD_PAGE ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024) 79.24 -+#define INITRD_DOT (1024*1024) 79.25 -+ 79.26 -+static void free_rootfs_mem(unsigned long start, unsigned long end) 79.27 -+{ 79.28 -+ free_init_pages(NULL, start, end); 79.29 -+} 79.30 -+ 79.31 -+static void _free_initrd(unsigned long initrd_start, unsigned long initrd_end, 79.32 -+ void (*free_initrd_mem)(unsigned long, unsigned long)); 79.33 -+ 79.34 -+static struct { 79.35 -+ int offset, last, inptr, freed; 79.36 -+ char *max; 79.37 -+} fill; 79.38 -+ 79.39 -+static void release_inbuf(unsigned n) 79.40 -+{ 79.41 -+ if (n >= INITRD_PAGE) { 79.42 -+ unsigned rem = n % INITRD_PAGE; 79.43 -+ unsigned end = initrd_start + n - rem; 79.44 -+ _free_initrd(initrd_start, end, free_rootfs_mem); 79.45 -+ fill.freed += n - rem; 79.46 -+ if (fill.freed >= INITRD_DOT) { 79.47 -+ fill.freed -= INITRD_DOT; 79.48 -+ printk("."); 79.49 -+ } 79.50 -+ initrd_start = end; 79.51 -+ fill.offset = rem; 79.52 -+ } 79.53 -+} 79.54 -+ 79.55 -+static int fill_buffer(void *buffer, unsigned size) 79.56 -+{ 79.57 -+ int max = fill.max - (char *) initrd_start - fill.offset; 79.58 -+ if (max > size) max = size; 79.59 -+ if (max > INITRD_PAGE) max = INITRD_PAGE; 79.60 -+ memcpy(buffer, (void *)(initrd_start + fill.offset), max); 79.61 -+ release_inbuf(fill.offset); 79.62 -+ fill.offset += max; 79.63 -+ fill.inptr += fill.last; 79.64 -+ fill.last = max; 79.65 -+ return max; 79.66 -+} 79.67 -+ 79.68 - static int __init write_buffer(char *buf, unsigned len) 79.69 - { 79.70 - count = len; 79.71 -@@ -418,6 +463,7 @@ 79.72 - decompress_fn decompress; 79.73 - const char *compress_name; 79.74 - static __initdata char msg_buf[64]; 79.75 -+ int early_free_initrd = (buf == (char *) initrd_start); 79.76 - 79.77 - header_buf = kmalloc(110, GFP_KERNEL); 79.78 - symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL); 79.79 -@@ -431,11 +478,16 @@ 79.80 - message = NULL; 79.81 - while (!message && len) { 79.82 - loff_t saved_offset = this_header; 79.83 -+ fill.offset = buf - (char *) initrd_start; 79.84 -+ fill.max = buf + len; 79.85 -+ fill.inptr = fill.last = fill.freed = 0; 79.86 - if (*buf == '0' && !(this_header & 3)) { 79.87 - state = Start; 79.88 - written = write_buffer(buf, len); 79.89 - buf += written; 79.90 - len -= written; 79.91 -+ if (early_free_initrd) 79.92 -+ release_inbuf(buf - (char *) initrd_start); 79.93 - continue; 79.94 - } 79.95 - if (!*buf) { 79.96 -@@ -447,7 +497,12 @@ 79.97 - this_header = 0; 79.98 - decompress = decompress_method(buf, len, &compress_name); 79.99 - if (decompress) { 79.100 -- res = decompress(buf, len, NULL, flush_buffer, NULL, 79.101 -+ if (early_free_initrd) { 79.102 -+ res = decompress(NULL, 0, fill_buffer, 79.103 -+ flush_buffer, NULL, &my_inptr, error); 79.104 -+ my_inptr += fill.inptr; 79.105 -+ } 79.106 -+ else res = decompress(buf, len, NULL, flush_buffer, NULL, 79.107 - &my_inptr, error); 79.108 - if (res) 79.109 - error("decompressor failed"); 79.110 -@@ -488,7 +546,8 @@ 79.111 - #include <linux/initrd.h> 79.112 - #include <linux/kexec.h> 79.113 - 79.114 --static void __init free_initrd(void) 79.115 -+static void _free_initrd(unsigned long initrd_start, unsigned long initrd_end, 79.116 -+ void (*free_initrd_mem)(unsigned long, unsigned long)) 79.117 - { 79.118 - #ifdef CONFIG_KEXEC 79.119 - unsigned long crashk_start = (unsigned long)__va(crashk_res.start); 79.120 -@@ -516,6 +574,12 @@ 79.121 - #endif 79.122 - free_initrd_mem(initrd_start, initrd_end); 79.123 - skip: 79.124 -+ ; 79.125 -+} 79.126 -+ 79.127 -+static void __init free_initrd(void) 79.128 -+{ 79.129 -+ _free_initrd(initrd_start, initrd_end, free_initrd_mem); 79.130 - initrd_start = 0; 79.131 - initrd_end = 0; 79.132 - }
80.1 --- a/kernel-modular/stuff/linux-header-2.6.37.u Thu Jul 18 13:24:21 2013 +0000 80.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 80.3 @@ -1,469 +0,0 @@ 80.4 ---- linux-2.6.30.6/arch/x86/boot/header.S 80.5 -+++ linux-2.6.30.6/arch/x86/boot/header.S 80.6 -@@ -6,7 +6,7 @@ 80.7 - * Based on bootsect.S and setup.S 80.8 - * modified by more people than can be counted 80.9 - * 80.10 -- * Rewritten as a common file by H. Peter Anvin (Apr 2007) 80.11 -+ * Rewritten Pascal Bellard (Nov 2009) 80.12 - * 80.13 - * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment 80.14 - * addresses must be multiplied by 16 to obtain their respective linear 80.15 -@@ -27,6 +27,8 @@ 80.16 - 80.17 - BOOTSEG = 0x07C0 /* original address of boot-sector */ 80.18 - SYSSEG = 0x1000 /* historical load address >> 4 */ 80.19 -+INITSEG = 0x9000 /* boot address >> 4 */ 80.20 -+SETUPSEG = 0x9020 /* setup address >> 4 */ 80.21 - 80.22 - #ifndef SVGA_MODE 80.23 - #define SVGA_MODE ASK_VGA 80.24 -@@ -40,53 +42,412 @@ 80.25 - #define ROOT_RDONLY 1 80.26 - #endif 80.27 - 80.28 -+/* some extra features */ 80.29 -+#define EDIT_CMDLINE on hotkey 80.30 -+#define SHOW_REGS show int13 status & parameters 80.31 -+ 80.32 - .code16 80.33 - .section ".bstext", "ax" 80.34 - 80.35 - .global bootsect_start 80.36 - bootsect_start: 80.37 -+ cld # assume nothing 80.38 -+stacktop = 0x9E00 # in 0x8000 .. 0xA000 80.39 -+zeroed = 48+10 # gdt + zeroed registers 80.40 -+ movw $stacktop-12-zeroed, %di # stacktop is an arbitrary value >= 80.41 -+ # length of bootsect + length of 80.42 -+ # setup + room for stack; 80.43 -+ # 12 is disk parm size. 80.44 -+ pushw $INITSEG 80.45 -+ popw %es # %es = INITSEG 80.46 -+ 80.47 -+ pushw %es 80.48 -+ popw %ss # %ss and %es already contain INITSEG 80.49 -+ movw %di, %sp # put stack at INITSEG:stacktop-... 80.50 -+ 80.51 -+# Many BIOS's default disk parameter tables will not recognize 80.52 -+# multi-sector reads beyond the maximum sector number specified 80.53 -+# in the default diskette parameter tables - this may mean 7 80.54 -+# sectors in some cases. 80.55 -+# 80.56 -+# Since single sector reads are slow and out of the question, 80.57 -+# we must take care of this by creating new parameter tables 80.58 -+# (for the first disk) in RAM. We can set the maximum sector 80.59 -+# count to 36 - the most we will encounter on an ED 2.88. 80.60 -+# 80.61 -+# High doesn't hurt. Low does. Let's use the max: 63 80.62 -+# 80.63 -+# Segments are as follows: %es = %ss = INITSEG, 80.64 -+ 80.65 -+ xorw %ax, %ax # %ax = 0 80.66 -+ movw $zeroed/2, %cx # clear gdt + offset, %ds, limits 80.67 -+ rep # don't worry about cld 80.68 -+ stosw # already done above 80.69 -+ popw %bx # offset = 0 80.70 -+ popw %ds # %ds = 0 80.71 -+ popw %gs # %gs = 0 80.72 -+ 80.73 -+ movb setup_sects+0x7C00, %al # read bootsector + setup (%ds = 0) 80.74 -+ incw %ax 80.75 -+ 80.76 -+ pushw %es 80.77 -+ pushw %di # %ds:%bx+0x78 is parameter table address 80.78 -+ ldsw 0x78(%bx), %si # %ds:%si is source 80.79 -+ movb $6, %cl # copy 12 bytes 80.80 -+ rep # don't worry about cld 80.81 -+ movsw # already done above 80.82 -+ popl %gs:0x78(%bx) # update parameter table address 80.83 -+ pushw %es 80.84 -+ popw %ds # now %ds = %es = %ss = INITSEG 80.85 -+ movb $63, 0x4-12(%di) # patch sector count, %di = stacktop 80.86 -+ cli 80.87 -+ 80.88 -+ xchg %ax, %di # sector count 80.89 -+ popw %ax # limits = 0 80.90 -+ incw %cx # cylinder 0, sector 1 80.91 -+ call read_first_sectors # read setup 80.92 -+ 80.93 -+offset_version = 0xE 80.94 -+ movw $0x200,%si 80.95 -+ addw offset_version(%si),%si # starting protocol 2.00, Kernel 1.3.73 80.96 -+ call putstr # show which kernel we are loading 80.97 -+ 80.98 -+# The cmdline can be entered and modifed at boot time. 80.99 -+# Only characters before the cursor are passed to the kernel. 80.100 -+ popw %bx # clear %bx 80.101 -+ orw cmd_line_ptr, %bx 80.102 -+ jz nocmdline 80.103 -+ pushw %bx 80.104 -+ incw %di 80.105 -+ call read_sectors 80.106 -+ popw %si 80.107 -+ call putstr 80.108 -+#ifdef EDIT_CMDLINE 80.109 -+cmdlp: 80.110 -+ movb $0x20, %al # clear end of line 80.111 -+ int $0x10 # with Space 80.112 -+ movb $8, %al # and BackSpace 80.113 -+ int $0x10 80.114 -+ decw %si 80.115 -+cmdget: 80.116 -+ call wait4key 80.117 -+ cmpb $8, %al # BackSpace ? 80.118 -+ je cmdbs 80.119 -+ movb %al, (%si) # store char 80.120 -+ lodsw # %si += 2 80.121 -+cmdbs: 80.122 -+#if 1 80.123 -+ cmpw %si,cmd_line_ptr 80.124 -+ je cmdget 80.125 -+#endif 80.126 -+ call putc # set %ah and %bx 80.127 -+ cmpb $10, %al # Enter ? 80.128 -+ jne cmdlp 80.129 -+ movb %bh,-2(%si) # set end of string and remove CR 80.130 -+endcmdline: 80.131 -+#endif 80.132 -+nocmdline: 80.133 - 80.134 -- # Normalize the start address 80.135 -- ljmp $BOOTSEG, $start2 80.136 -- 80.137 --start2: 80.138 -- movw %cs, %ax 80.139 -- movw %ax, %ds 80.140 -- movw %ax, %es 80.141 -- movw %ax, %ss 80.142 -- xorw %sp, %sp 80.143 -- sti 80.144 -- cld 80.145 -- 80.146 -- movw $bugger_off_msg, %si 80.147 -+# This routine loads the system at address SYSSEG, making sure 80.148 -+# no 64kB boundaries are crossed. We try to load it as fast as 80.149 -+# possible, loading whole tracks whenever we can. 80.150 -+ 80.151 -+ramdisk_image = 0x0218 80.152 -+ramdisk_size = 0x021C 80.153 -+ movw %sp, %si # for bootsect_gdt 80.154 -+ decw 16(%si) # bootsect_src = 64Kb 80.155 -+ decw 24(%si) # bootsect_dst = 64Kb 80.156 -+ movw $syssize, %di 80.157 -+type_of_loader = 0x210 80.158 -+loadflags = 0x211 80.159 -+heap_end_ptr = 0x224 80.160 -+ksyssize = 500 80.161 -+ orw $0x80FF, type_of_loader-ksyssize(%di) # loader type = 0xFF 80.162 -+ movw $stacktop-0x200, heap_end_ptr-ksyssize(%di) 80.163 -+ movb $0x10, %al # destination = 0x100000 80.164 -+ movb $5, %cl 80.165 -+initrdlp: 80.166 -+ decw %ax 80.167 -+ movb $0x93,%ah 80.168 -+ movw %ax, 28(%si) # bootsect_dst_base+2 80.169 -+ movb $(SYSSEG/4096), %al # source = SYSSEG 80.170 -+ movw %ax, 20(%si) # bootsect_src_base+2 80.171 -+ cbw 80.172 -+ cwde 80.173 -+ shlw %cl, %ax 80.174 -+ decw %ax 80.175 -+ addl (%di),%eax 80.176 -+ shrl %cl, %eax 80.177 -+syslp: 80.178 -+ pushw $SYSSEG 80.179 -+ popw %es 80.180 -+ movw $128,%di # 64Kb 80.181 -+ subw %di, %ax # max 32M > int 15 limit 80.182 -+ pushf 80.183 -+ jnc not_last 80.184 -+ addw %ax, %di 80.185 -+not_last: 80.186 -+ xorw %bx, %bx # clear %bx 80.187 -+ pushw %ax 80.188 -+#if defined(SHOW_REGS) 80.189 -+ pushw %si 80.190 -+ call read_sectors 80.191 -+ popw %si 80.192 -+#else 80.193 -+ call read_sectors 80.194 -+#endif 80.195 -+ movw $0x8000, %cx # full 64K 80.196 -+ movb $0x87, %ah 80.197 -+ incb 28(%si) # bootsect_dst_base+2 80.198 -+ int $0x15 # max 16M 80.199 -+ popw %ax 80.200 -+ popf 80.201 -+ ja syslp 80.202 -+ movw ramdisk_image+2,%ax 80.203 -+ movw $ramdisk_size,%di 80.204 -+ movb $9, %cl 80.205 -+ cmpb %al,28(%si) 80.206 -+ jb initrdlp 80.207 -+ 80.208 -+# This procedure turns off the floppy drive motor, so 80.209 -+# that we enter the kernel in a known state, and 80.210 -+# don't have to worry about it later. 80.211 -+ 80.212 -+#if 1 80.213 -+kill_motor: 80.214 -+ xchgw %ax, %bx # reset FDC 80.215 -+ int $0x13 80.216 -+#else 80.217 -+kill_motor: 80.218 -+ movw $0x3f2, %dx 80.219 -+ xchgw %ax, %bx 80.220 -+ outb %al, %dx 80.221 -+#endif 80.222 - 80.223 --msg_loop: 80.224 -- lodsb 80.225 -- andb %al, %al 80.226 -- jz bs_die 80.227 -- movb $0xe, %ah 80.228 -- movw $7, %bx 80.229 -+# After that (everything loaded), we jump to the setup-routine 80.230 -+# loaded directly after the bootblock: 80.231 -+# Segments are as follows: %ds = %ss = INITSEG 80.232 -+ 80.233 -+ ljmp $SETUPSEG, $0 80.234 -+ 80.235 -+# read_sectors reads %di sectors into %es:0 buffer. 80.236 -+# %es:0 is updated to the next memory location. 80.237 -+# First, sectors are read sector by sector until 80.238 -+# sector per track count is known. Then they are 80.239 -+# read track by track. 80.240 -+# Assume no error on first track. 80.241 -+ 80.242 -+#define FLOPPY_CYLINDERS 80 /* 80 cylinders minimum */ 80.243 -+#define FLOPPY_HEADS 2 /* 2 heads minimum */ 80.244 -+#define FLOPPY_SECTORS 18 /* 18 sectors minimum */ 80.245 -+ 80.246 -+#ifdef SHOW_REGS 80.247 -+print_loop: 80.248 -+ movb $0x6 + 'A' - 1, %al 80.249 -+ subb %cl, %al 80.250 -+ movw $regs, %si # caller %si is saved 80.251 -+ call putcs # putc(%al) + putstr(%si) 80.252 -+# it will print out all of the registers. 80.253 -+ popw %bp # load word into %si 80.254 -+ jmp print_all # print %bp (status) 80.255 -+#endif 80.256 -+check_limits: 80.257 -+#ifndef SHOW_REGS 80.258 -+ popw %dx 80.259 -+#endif 80.260 -+ cmpb $FLOPPY_SECTORS+1, %cl # 18 sectors minimum 80.261 -+ jb check_head 80.262 -+ cmpb %al, %cl # max sector known ? 80.263 -+ ja next_head # no -> store it 80.264 -+check_head: 80.265 -+ cmpb $FLOPPY_HEADS, %dh # 2 heads minimum 80.266 -+ jb check_cylinder 80.267 -+ cmpb %ah, %dh # max head known ? 80.268 -+ ja next_cylinder # no -> store it 80.269 -+check_cylinder: 80.270 -+ pushaw 80.271 -+#ifdef SHOW_REGS 80.272 -+ cmpw $0x600,%bp # disk changed ? 80.273 -+ je reset_floppy 80.274 -+ pushw %es # print %es (named EX) 80.275 -+ pushw %dx # print %dx 80.276 -+ pushw %cx # print %cx 80.277 -+ pushw %bx # print %bx 80.278 -+ xchgw %ax, %si 80.279 -+ movb $2,%ah 80.280 -+ pushw %ax # print %ax 80.281 -+ movb $6,%cl 80.282 -+print_all: 80.283 -+ movb $4, %ch # 4 hex digits 80.284 -+print_digit: 80.285 -+ rolw $4, %bp # rotate to use low 4 bits 80.286 -+ movb $0x0f, %al 80.287 -+ andw %bp, %ax # %al = mask for nybble 80.288 -+ addb $0x90, %al # convert %al to ascii hex 80.289 -+ daa # in only four instructions! 80.290 -+ adcb $0x40, %al 80.291 -+ daa 80.292 -+ call putc # set %ah and %bx 80.293 -+ decb %ch 80.294 -+ jnz print_digit 80.295 -+ movb $0x20, %al # SPACE 80.296 - int $0x10 80.297 -- jmp msg_loop 80.298 -- 80.299 --bs_die: 80.300 -- # Allow the user to press a key, then reboot 80.301 -- xorw %ax, %ax 80.302 -+ loop print_loop 80.303 -+ call wait 80.304 -+ cbw # %ah = 0 80.305 -+reset_floppy: 80.306 -+#else 80.307 -+ cbw # %ah = 0 80.308 -+#endif 80.309 -+ int $0x13 # reset controler 80.310 -+ popaw 80.311 -+read_sectorslp: 80.312 -+ pushw %dx # some bios break dx... 80.313 -+ pushw %ax # limits 80.314 -+ subb %cl, %al # sectors remaining in track 80.315 -+ ja tolastsect 80.316 -+ movb $1, %al # 1 sector mini 80.317 -+tolastsect: 80.318 -+ cbw 80.319 -+ cmpw %di, %ax 80.320 -+ jb more1trk 80.321 -+ movw %di, %ax # sectors to read 80.322 -+more1trk: 80.323 -+ pushw %ax # save context 80.324 -+ movb $2, %ah # cmd: read chs 80.325 -+ int $0x13 80.326 -+#ifdef SHOW_REGS 80.327 -+ xchgw %ax, %bp # status 80.328 -+#endif 80.329 -+# ifdef SHOW_REGS 80.330 -+ popw %si # save %ax 80.331 -+ popw %ax # limits 80.332 -+ popw %dx 80.333 -+# else 80.334 -+ popw %dx # save %ax 80.335 -+ popw %ax # limits 80.336 -+# endif 80.337 -+ jc check_limits 80.338 -+ xchgw %ax, %bp 80.339 -+# ifdef SHOW_REGS 80.340 -+update_regs: 80.341 -+ incw %cx # next sector 80.342 -+ movw %cx, %fs 80.343 -+ addb $2,%bh # next location 80.344 -+ decw %di # update sector counter 80.345 -+ jz putcdot 80.346 -+ decw %si 80.347 -+ jnz update_regs 80.348 -+# else 80.349 -+ addw %dx,%cx # next sector 80.350 -+ addb %dl,%bh 80.351 -+ addb %dl,%bh # next location 80.352 -+ subw %dx,%di # update sector counter 80.353 -+ popw %dx 80.354 -+ jz putcdot 80.355 -+# endif 80.356 -+read_sectors: 80.357 -+ movw %fs, %cx 80.358 -+ xchgw %ax, %bp 80.359 -+ cmpb %al,%cl # reach sector limit ? 80.360 -+ jne bdendlp 80.361 -+next_head: 80.362 -+ movb %cl,%al 80.363 -+ incb %dh # next head 80.364 -+ movb $1,%cl # first sector 80.365 -+ cmpb %ah, %dh # reach head limit ? 80.366 -+ jne bdendlp 80.367 -+next_cylinder: 80.368 -+ movb %dh,%ah 80.369 -+# NOTE : support 256 cylinders max 80.370 -+ incb %ch # next cylinder 80.371 -+read_first_sectors: 80.372 -+ movb $0,%dh # first head 80.373 -+cylinder_count = 496 80.374 -+ cmpb $FLOPPY_CYLINDERS,%ch # reach cylinder limit ? 80.375 -+ jb bdendlp 80.376 -+ cmpb cylinder_count, %ch 80.377 -+ jb bdendlp 80.378 -+next_floppy: 80.379 -+ movb $0,%ch # first cylinder 80.380 -+ pushaw 80.381 -+ movw $swap_floppy,%si 80.382 -+ incb 12(%si) 80.383 -+ pushw %bx 80.384 -+ call putstr 80.385 -+ popw %bx 80.386 -+waitfloppy: 80.387 -+ call wait 80.388 -+ jne waitfloppydone 80.389 -+ pushw %dx # some bios break dx... 80.390 -+ cbw 80.391 -+ int $0x13 # reset FDC 80.392 -+ movw $0x201,%ax 80.393 -+# cwd 80.394 -+# movw $1,%cx 80.395 -+ int $0x13 # read first sector 80.396 -+ popw %dx 80.397 -+ rclb $1,%ah # floppy changed 06=>0D no error 00 80.398 -+ cmpb -2(%si), %ah # 0D then 00 80.399 -+ jne waitfloppy # no => try again 80.400 -+ incw %si 80.401 -+ orb %ah,%ah # was 00 ? 80.402 -+ jne waitfloppy 80.403 -+waitfloppydone: 80.404 -+ popaw 80.405 -+bdendlp: 80.406 -+ jmp read_sectorslp 80.407 -+ 80.408 -+putcdot: 80.409 -+ pushw %ss 80.410 -+ popw %es # restore es 80.411 -+ movb $0x2e+3, %al # loading... message 2e = . 80.412 -+putclf: 80.413 -+ subb $3, %al 80.414 -+putc: 80.415 -+ movb $0xe, %ah 80.416 -+ movw $7, %bx # one dot each 64k 80.417 -+ int $0x10 80.418 -+ cmp $0xd, %al # CR ? 80.419 -+ je putclf 80.420 -+ ret 80.421 -+ 80.422 -+putstr: 80.423 -+ movb $0xd, %al # CR 80.424 -+putcs: 80.425 -+ call putc 80.426 -+ lodsb 80.427 -+ orb %al,%al # end of string is \0 80.428 -+ jnz putcs 80.429 -+ ret 80.430 -+ 80.431 -+clock = 0x46C 80.432 -+wait: 80.433 -+wait4key: 80.434 -+ movw $clock, %di 80.435 -+#define DELAY 5 80.436 -+ movb $(DELAY*182)/10,%cl 80.437 -+ addb %gs:(%di),%cl 80.438 -+waitkbd: 80.439 -+ movw $0x10D, %ax # test keyboard, timeout => CR 80.440 -+ cmpb %gs:(%di),%cl 80.441 -+ je waitdone 80.442 - int $0x16 80.443 -- int $0x19 80.444 -+ jz waitkbd 80.445 -+ cbw 80.446 -+ int $0x16 # eat char 80.447 -+ movw %di, %gs # disable timeout 80.448 -+ incw %di # clear Z 80.449 -+waitdone: 80.450 -+ ret 80.451 - 80.452 -- # int 0x19 should never return. In case it does anyway, 80.453 -- # invoke the BIOS reset code... 80.454 -- ljmp $0xf000,$0xfff0 80.455 -- 80.456 -- .section ".bsdata", "a" 80.457 --bugger_off_msg: 80.458 -- .ascii "Direct booting from floppy is no longer supported.\r\n" 80.459 -- .ascii "Please use a boot loader program instead.\r\n" 80.460 -- .ascii "\n" 80.461 -- .ascii "Remove disk and press any key to reboot . . .\r\n" 80.462 -- .byte 0 80.463 -+#ifdef SHOW_REGS 80.464 -+regs: .asciz "X:" 80.465 -+#endif 80.466 - 80.467 -+swap_floppy: .ascii "Insert disk 1" 80.468 -+ .ascii "." 80.469 -+ .byte 7,13,0 80.470 - 80.471 - # Kernel attributes; used by setup. This is part 1 of the 80.472 - # header, from the old boot sector.
81.1 --- a/kernel-modular/stuff/linux-squashfs-lzma-2.6.34.u Thu Jul 18 13:24:21 2013 +0000 81.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 81.3 @@ -1,649 +0,0 @@ 81.4 ---- linux-2.6.30.6/include/linux/decompress/bunzip2_mm.h 81.5 -+++ linux-2.6.30.6/include/linux/decompress/bunzip2_mm.h 81.6 -@@ -0,0 +1,13 @@ 81.7 -+#ifndef BUNZIP2_MM_H 81.8 -+#define BUNZIP2_MM_H 81.9 -+ 81.10 -+#ifdef STATIC 81.11 -+/* Code active when included from pre-boot environment: */ 81.12 -+#define INIT 81.13 -+#else 81.14 -+/* Compile for initramfs/initrd code only */ 81.15 -+#define INIT __init 81.16 -+static void(*error)(char *m); 81.17 -+#endif 81.18 -+ 81.19 -+#endif 81.20 - 81.21 ---- linux-2.6.30.6/include/linux/decompress/inflate_mm.h 81.22 -+++ linux-2.6.30.6/include/linux/decompress/inflate_mm.h 81.23 -@@ -0,0 +1,13 @@ 81.24 -+#ifndef INFLATE_MM_H 81.25 -+#define INFLATE_MM_H 81.26 -+ 81.27 -+#ifdef STATIC 81.28 -+/* Code active when included from pre-boot environment: */ 81.29 -+#define INIT 81.30 -+#else 81.31 -+/* Compile for initramfs/initrd code only */ 81.32 -+#define INIT __init 81.33 -+static void(*error)(char *m); 81.34 -+#endif 81.35 -+ 81.36 -+#endif 81.37 - 81.38 -#--- linux-2.6.30.6/include/linux/decompress/mm.h 81.39 -#+++ linux-2.6.30.6/include/linux/decompress/mm.h 81.40 -@@ -63,8 +63,6 @@ 81.41 - 81.42 - #define set_error_fn(x) 81.43 - 81.44 --#define INIT 81.45 -- 81.46 - #else /* STATIC */ 81.47 - 81.48 - /* Code active when compiled standalone for use when loading ramdisk: */ 81.49 -@@ -84,10 +82,8 @@ 81.50 - #define large_malloc(a) vmalloc(a) 81.51 - #define large_free(a) vfree(a) 81.52 - 81.53 --static void(*error)(char *m); 81.54 - #define set_error_fn(x) error = x; 81.55 - 81.56 --#define INIT __init 81.57 - #define STATIC 81.58 - 81.59 - #include <linux/init.h> 81.60 - 81.61 ---- linux-2.6.30.6/include/linux/decompress/unlzma_mm.h 81.62 -+++ linux-2.6.30.6/include/linux/decompress/unlzma_mm.h 81.63 -@@ -0,0 +1,20 @@ 81.64 -+#ifndef UNLZMA_MM_H 81.65 -+#define UNLZMA_MM_H 81.66 -+ 81.67 -+#ifdef STATIC 81.68 -+ 81.69 -+/* Code active when included from pre-boot environment: */ 81.70 -+#define INIT 81.71 -+ 81.72 -+#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED) 81.73 -+ 81.74 -+/* Make it available to non initramfs/initrd code */ 81.75 -+#define INIT 81.76 -+#include <linux/module.h> 81.77 -+#else 81.78 -+ 81.79 -+/* Compile for initramfs/initrd code only */ 81.80 -+#define INIT __init 81.81 -+#endif 81.82 -+ 81.83 -+#endif 81.84 - 81.85 ---- linux-2.6.30.6/lib/Kconfig 81.86 -+++ linux-2.6.30.6/lib/Kconfig 81.87 -@@ -117,6 +117,9 @@ 81.88 - config DECOMPRESS_LZMA 81.89 - tristate 81.90 - 81.91 -+config DECOMPRESS_LZMA_NEEDED 81.92 -+ boolean 81.93 -+ 81.94 - config DECOMPRESS_LZO 81.95 - select LZO_DECOMPRESS 81.96 - tristate 81.97 - 81.98 ---- linux-2.6.30.6/lib/decompress_bunzip2.c 81.99 -+++ linux-2.6.30.6/lib/decompress_bunzip2.c 81.100 -@@ -52,6 +52,7 @@ 81.101 - #include <linux/slab.h> 81.102 - #endif /* STATIC */ 81.103 - 81.104 -+#include <linux/decompress/bunzip2_mm.h> 81.105 - #include <linux/decompress/mm.h> 81.106 - 81.107 - #ifndef INT_MAX 81.108 - 81.109 ---- linux-2.6.30.6/lib/decompress_inflate.c 81.110 -+++ linux-2.6.30.6/lib/decompress_inflate.c 81.111 -@@ -23,6 +23,7 @@ 81.112 - 81.113 - #endif /* STATIC */ 81.114 - 81.115 -+#include <linux/decompress/inflate_mm.h> 81.116 - #include <linux/decompress/mm.h> 81.117 - 81.118 - #define GZIP_IOBUF_SIZE (16*1024) 81.119 - 81.120 ---- linux-2.6.30.6/lib/decompress_unlzma.c 81.121 -+++ linux-2.6.30.6/lib/decompress_unlzma.c 81.122 -@@ -36,6 +36,7 @@ 81.123 - #include <linux/slab.h> 81.124 - #endif /* STATIC */ 81.125 - 81.126 -+#include <linux/decompress/unlzma_mm.h> 81.127 - #include <linux/decompress/mm.h> 81.128 - 81.129 - #define MIN(a, b) (((a) < (b)) ? (a) : (b)) 81.130 -@@ -88,7 +89,7 @@ 81.131 - } 81.132 - 81.133 - /* Called twice: once at startup and once in rc_normalize() */ 81.134 --static void INIT rc_read(struct rc *rc) 81.135 -+static void INIT rc_read(struct rc *rc, void(*error)(char *x)) 81.136 - { 81.137 - rc->buffer_size = rc->fill((char *)rc->buffer, LZMA_IOBUF_SIZE); 81.138 - if (rc->buffer_size <= 0) 81.139 -@@ -115,13 +116,13 @@ 81.140 - rc->range = 0xFFFFFFFF; 81.141 - } 81.142 - 81.143 --static inline void INIT rc_init_code(struct rc *rc) 81.144 -+static inline void INIT rc_init_code(struct rc *rc, void(*error)(char *x)) 81.145 - { 81.146 - int i; 81.147 - 81.148 - for (i = 0; i < 5; i++) { 81.149 - if (rc->ptr >= rc->buffer_end) 81.150 -- rc_read(rc); 81.151 -+ rc_read(rc, error); 81.152 - rc->code = (rc->code << 8) | *rc->ptr++; 81.153 - } 81.154 - } 81.155 -@@ -134,32 +135,33 @@ 81.156 - } 81.157 - 81.158 - /* Called twice, but one callsite is in inline'd rc_is_bit_0_helper() */ 81.159 --static void INIT rc_do_normalize(struct rc *rc) 81.160 -+static void INIT rc_do_normalize(struct rc *rc, void(*error)(char *x)) 81.161 - { 81.162 - if (rc->ptr >= rc->buffer_end) 81.163 -- rc_read(rc); 81.164 -+ rc_read(rc, error); 81.165 - rc->range <<= 8; 81.166 - rc->code = (rc->code << 8) | *rc->ptr++; 81.167 - } 81.168 --static inline void INIT rc_normalize(struct rc *rc) 81.169 -+static inline void INIT rc_normalize(struct rc *rc, void(*error)(char *x)) 81.170 - { 81.171 - if (rc->range < (1 << RC_TOP_BITS)) 81.172 -- rc_do_normalize(rc); 81.173 -+ rc_do_normalize(rc, error); 81.174 - } 81.175 - 81.176 - /* Called 9 times */ 81.177 - /* Why rc_is_bit_0_helper exists? 81.178 - *Because we want to always expose (rc->code < rc->bound) to optimizer 81.179 - */ 81.180 --static inline uint32_t INIT rc_is_bit_0_helper(struct rc *rc, uint16_t *p) 81.181 -+static inline uint32_t INIT rc_is_bit_0_helper(struct rc *rc, uint16_t *p, 81.182 -+ void (*error)(char *x)) 81.183 - { 81.184 -- rc_normalize(rc); 81.185 -+ rc_normalize(rc, error); 81.186 - rc->bound = *p * (rc->range >> RC_MODEL_TOTAL_BITS); 81.187 - return rc->bound; 81.188 - } 81.189 --static inline int INIT rc_is_bit_0(struct rc *rc, uint16_t *p) 81.190 -+static inline int INIT rc_is_bit_0(struct rc *rc, uint16_t *p, void(*error)(char *x)) 81.191 - { 81.192 -- uint32_t t = rc_is_bit_0_helper(rc, p); 81.193 -+ uint32_t t = rc_is_bit_0_helper(rc, p, error); 81.194 - return rc->code < t; 81.195 - } 81.196 - 81.197 -@@ -177,9 +179,9 @@ 81.198 - } 81.199 - 81.200 - /* Called 4 times in unlzma loop */ 81.201 --static int INIT rc_get_bit(struct rc *rc, uint16_t *p, int *symbol) 81.202 -+static int INIT rc_get_bit(struct rc *rc, uint16_t *p, int *symbol, void(*error)(char *x)) 81.203 - { 81.204 -- if (rc_is_bit_0(rc, p)) { 81.205 -+ if (rc_is_bit_0(rc, p, error)) { 81.206 - rc_update_bit_0(rc, p); 81.207 - *symbol *= 2; 81.208 - return 0; 81.209 -@@ -191,9 +193,9 @@ 81.210 - } 81.211 - 81.212 - /* Called once */ 81.213 --static inline int INIT rc_direct_bit(struct rc *rc) 81.214 -+static inline int INIT rc_direct_bit(struct rc *rc , void(*error)(char *x)) 81.215 - { 81.216 -- rc_normalize(rc); 81.217 -+ rc_normalize(rc, error); 81.218 - rc->range >>= 1; 81.219 - if (rc->code >= rc->range) { 81.220 - rc->code -= rc->range; 81.221 -@@ -204,13 +206,14 @@ 81.222 - 81.223 - /* Called twice */ 81.224 - static inline void INIT 81.225 --rc_bit_tree_decode(struct rc *rc, uint16_t *p, int num_levels, int *symbol) 81.226 -+rc_bit_tree_decode(struct rc *rc, uint16_t *p, int num_levels, int *symbol, 81.227 -+ void(*error)(char *x)) 81.228 - { 81.229 - int i = num_levels; 81.230 - 81.231 - *symbol = 1; 81.232 - while (i--) 81.233 -- rc_get_bit(rc, p + *symbol, symbol); 81.234 -+ rc_get_bit(rc, p + *symbol, symbol, error); 81.235 - *symbol -= 1 << num_levels; 81.236 - } 81.237 - 81.238 -@@ -406,7 +409,8 @@ 81.239 - static inline void INIT process_bit0(struct writer *wr, struct rc *rc, 81.240 - struct cstate *cst, uint16_t *p, 81.241 - int pos_state, uint16_t *prob, 81.242 -- int lc, uint32_t literal_pos_mask) { 81.243 -+ int lc, uint32_t literal_pos_mask, 81.244 -+ void(*error)(char *x)) { 81.245 - int mi = 1; 81.246 - static const int state[LZMA_NUM_STATES] = 81.247 - { 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5 }; 81.248 -@@ -427,7 +431,7 @@ 81.249 - match_byte <<= 1; 81.250 - bit = match_byte & 0x100; 81.251 - prob_lit = prob + 0x100 + bit + mi; 81.252 -- if (rc_get_bit(rc, prob_lit, &mi)) { 81.253 -+ if (rc_get_bit(rc, prob_lit, &mi, error)) { 81.254 - if (!bit) 81.255 - break; 81.256 - } else { 81.257 -@@ -438,7 +442,7 @@ 81.258 - } 81.259 - while (mi < 0x100) { 81.260 - uint16_t *prob_lit = prob + mi; 81.261 -- rc_get_bit(rc, prob_lit, &mi); 81.262 -+ rc_get_bit(rc, prob_lit, &mi, error); 81.263 - } 81.264 - write_byte(wr, mi); 81.265 - cst->state = state[cst->state]; 81.266 -@@ -446,7 +453,8 @@ 81.267 - 81.268 - static inline void INIT process_bit1(struct writer *wr, struct rc *rc, 81.269 - struct cstate *cst, uint16_t *p, 81.270 -- int pos_state, uint16_t *prob) { 81.271 -+ int pos_state, uint16_t *prob, 81.272 -+ void(*error)(char *x)) { 81.273 - int offset; 81.274 - uint16_t *prob_len; 81.275 - int num_bits; 81.276 -@@ -454,7 +459,7 @@ 81.277 - 81.278 - rc_update_bit_1(rc, prob); 81.279 - prob = p + LZMA_IS_REP + cst->state; 81.280 -- if (rc_is_bit_0(rc, prob)) { 81.281 -+ if (rc_is_bit_0(rc, prob, error)) { 81.282 - rc_update_bit_0(rc, prob); 81.283 - cst->rep3 = cst->rep2; 81.284 - cst->rep2 = cst->rep1; 81.285 -@@ -464,13 +469,13 @@ 81.286 - } else { 81.287 - rc_update_bit_1(rc, prob); 81.288 - prob += LZMA_IS_REP_G0 - LZMA_IS_REP; 81.289 -- if (rc_is_bit_0(rc, prob)) { 81.290 -+ if (rc_is_bit_0(rc, prob, error)) { 81.291 - rc_update_bit_0(rc, prob); 81.292 - prob = (p + LZMA_IS_REP_0_LONG 81.293 - + (cst->state << 81.294 - LZMA_NUM_POS_BITS_MAX) + 81.295 - pos_state); 81.296 -- if (rc_is_bit_0(rc, prob)) { 81.297 -+ if (rc_is_bit_0(rc, prob, error)) { 81.298 - rc_update_bit_0(rc, prob); 81.299 - 81.300 - cst->state = cst->state < LZMA_NUM_LIT_STATES ? 81.301 -@@ -485,13 +490,13 @@ 81.302 - 81.303 - rc_update_bit_1(rc, prob); 81.304 - prob += LZMA_IS_REP_G1 - LZMA_IS_REP_G0; 81.305 -- if (rc_is_bit_0(rc, prob)) { 81.306 -+ if (rc_is_bit_0(rc, prob, error)) { 81.307 - rc_update_bit_0(rc, prob); 81.308 - distance = cst->rep1; 81.309 - } else { 81.310 - rc_update_bit_1(rc, prob); 81.311 - prob += LZMA_IS_REP_G2 - LZMA_IS_REP_G1; 81.312 -- if (rc_is_bit_0(rc, prob)) { 81.313 -+ if (rc_is_bit_0(rc, prob, error)) { 81.314 - rc_update_bit_0(rc, prob); 81.315 - distance = cst->rep2; 81.316 - } else { 81.317 -@@ -509,7 +514,7 @@ 81.318 - } 81.319 - 81.320 - prob_len = prob + LZMA_LEN_CHOICE; 81.321 -- if (rc_is_bit_0(rc, prob_len)) { 81.322 -+ if (rc_is_bit_0(rc, prob_len, error)) { 81.323 - rc_update_bit_0(rc, prob_len); 81.324 - prob_len += LZMA_LEN_LOW - LZMA_LEN_CHOICE 81.325 - + (pos_state << 81.326 -@@ -519,7 +524,7 @@ 81.327 - } else { 81.328 - rc_update_bit_1(rc, prob_len); 81.329 - prob_len += LZMA_LEN_CHOICE_2 - LZMA_LEN_CHOICE; 81.330 -- if (rc_is_bit_0(rc, prob_len)) { 81.331 -+ if (rc_is_bit_0(rc, prob_len, error)) { 81.332 - rc_update_bit_0(rc, prob_len); 81.333 - prob_len += LZMA_LEN_MID - LZMA_LEN_CHOICE_2 81.334 - + (pos_state << 81.335 -@@ -535,7 +540,7 @@ 81.336 - } 81.337 - } 81.338 - 81.339 -- rc_bit_tree_decode(rc, prob_len, num_bits, &len); 81.340 -+ rc_bit_tree_decode(rc, prob_len, num_bits, &len, error); 81.341 - len += offset; 81.342 - 81.343 - if (cst->state < 4) { 81.344 -@@ -550,7 +555,7 @@ 81.345 - << LZMA_NUM_POS_SLOT_BITS); 81.346 - rc_bit_tree_decode(rc, prob, 81.347 - LZMA_NUM_POS_SLOT_BITS, 81.348 -- &pos_slot); 81.349 -+ &pos_slot, error); 81.350 - if (pos_slot >= LZMA_START_POS_MODEL_INDEX) { 81.351 - int i, mi; 81.352 - num_bits = (pos_slot >> 1) - 1; 81.353 -@@ -563,7 +568,7 @@ 81.354 - num_bits -= LZMA_NUM_ALIGN_BITS; 81.355 - while (num_bits--) 81.356 - cst->rep0 = (cst->rep0 << 1) | 81.357 -- rc_direct_bit(rc); 81.358 -+ rc_direct_bit(rc, error); 81.359 - prob = p + LZMA_ALIGN; 81.360 - cst->rep0 <<= LZMA_NUM_ALIGN_BITS; 81.361 - num_bits = LZMA_NUM_ALIGN_BITS; 81.362 -@@ -571,7 +576,7 @@ 81.363 - i = 1; 81.364 - mi = 1; 81.365 - while (num_bits--) { 81.366 -- if (rc_get_bit(rc, prob + mi, &mi)) 81.367 -+ if (rc_get_bit(rc, prob + mi, &mi, error)) 81.368 - cst->rep0 |= i; 81.369 - i <<= 1; 81.370 - } 81.371 -@@ -588,12 +593,12 @@ 81.372 - 81.373 - 81.374 - 81.375 --STATIC inline int INIT unlzma(unsigned char *buf, int in_len, 81.376 -+STATIC int INIT unlzma(unsigned char *buf, int in_len, 81.377 - int(*fill)(void*, unsigned int), 81.378 - int(*flush)(void*, unsigned int), 81.379 - unsigned char *output, 81.380 - int *posp, 81.381 -- void(*error_fn)(char *x) 81.382 -+ void(*error)(char *x) 81.383 - ) 81.384 - { 81.385 - extern int cpio_flush_buffer(void*, unsigned int); 81.386 -@@ -610,7 +615,6 @@ 81.387 - unsigned char *inbuf; 81.388 - int ret = -1; 81.389 - 81.390 -- set_error_fn(error_fn); 81.391 - 81.392 - if (buf) 81.393 - inbuf = buf; 81.394 -@@ -638,7 +642,7 @@ 81.395 - 81.396 - for (i = 0; i < sizeof(header); i++) { 81.397 - if (rc.ptr >= rc.buffer_end) 81.398 -- rc_read(&rc); 81.399 -+ rc_read(&rc, error); 81.400 - ((unsigned char *)&header)[i] = *rc.ptr++; 81.401 - } 81.402 - 81.403 -@@ -683,17 +687,17 @@ 81.404 - for (i = 0; i < num_probs; i++) 81.405 - p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1; 81.406 - wr.max_index = wr.next_index = 0; 81.407 -- rc_init_code(&rc); 81.408 -+ rc_init_code(&rc, error); 81.409 - 81.410 - while (get_pos(&wr) < header.dst_size) { 81.411 - int pos_state = get_pos(&wr) & pos_state_mask; 81.412 - uint16_t *prob = p + LZMA_IS_MATCH + 81.413 - (cst.state << LZMA_NUM_POS_BITS_MAX) + pos_state; 81.414 -- if (rc_is_bit_0(&rc, prob)) 81.415 -+ if (rc_is_bit_0(&rc, prob, error)) 81.416 - process_bit0(&wr, &rc, &cst, p, pos_state, prob, 81.417 -- lc, literal_pos_mask); 81.418 -+ lc, literal_pos_mask, error); 81.419 - else { 81.420 -- process_bit1(&wr, &rc, &cst, p, pos_state, prob); 81.421 -+ process_bit1(&wr, &rc, &cst, p, pos_state, prob, error); 81.422 - if (cst.rep0 == 0) 81.423 - break; 81.424 - } 81.425 -@@ -727,6 +731,9 @@ 81.426 - exit_0: 81.427 - return ret; 81.428 - } 81.429 -+#if defined(CONFIG_DECOMPRESS_LZMA_NEEDED) && !defined(PREBOOT) 81.430 -+EXPORT_SYMBOL(unlzma); 81.431 -+#endif 81.432 - 81.433 - #ifdef PREBOOT 81.434 - STATIC int INIT decompress(unsigned char *buf, int in_len, 81.435 - 81.436 ---- linux-2.6.34/fs/squashfs/Kconfig 81.437 -+++ linux-2.6.34/fs/squashfs/Kconfig 81.438 -@@ -26,6 +26,12 @@ 81.439 - 81.440 - If unsure, say N. 81.441 - 81.442 -+config SQUASHFS_LZMA 81.443 -+ bool "Include support for LZMA compressed file systems" 81.444 -+ depends on SQUASHFS 81.445 -+ select DECOMPRESS_LZMA 81.446 -+ select DECOMPRESS_LZMA_NEEDED 81.447 -+ 81.448 - config SQUASHFS_EMBEDDED 81.449 - 81.450 - bool "Additional option for memory-constrained systems" 81.451 - 81.452 ---- linux-2.6.34/fs/squashfs/Makefile 81.453 -+++ linux-2.6.34/fs/squashfs/Makefile 81.454 -@@ -5,3 +5,4 @@ 81.455 - obj-$(CONFIG_SQUASHFS) += squashfs.o 81.456 - squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o 81.457 - squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o 81.458 -+squashfs-$(CONFIG_SQUASHFS_LZMA) += lzma_wrapper.o 81.459 - 81.460 ---- linux-2.6.34/fs/squashfs/decompressor.c 81.461 -+++ linux-2.6.34/fs/squashfs/decompressor.c 81.462 -@@ -50,7 +50,11 @@ 81.463 - 81.464 - static const struct squashfs_decompressor *decompressor[] = { 81.465 - &squashfs_zlib_comp_ops, 81.466 -+#ifdef CONFIG_SQUASHFS_LZMA 81.467 -+ &squashfs_lzma_comp_ops, 81.468 -+#else 81.469 - &squashfs_lzma_unsupported_comp_ops, 81.470 -+#endif 81.471 - &squashfs_lzo_unsupported_comp_ops, 81.472 - &squashfs_unknown_comp_ops 81.473 - }; 81.474 - 81.475 ---- linux-2.6.34/fs/squashfs/lzma_wrapper.c 81.476 -+++ linux-2.6.34/fs/squashfs/lzma_wrapper.c 81.477 -@@ -0,0 +1,152 @@ 81.478 -+/* 81.479 -+ * Squashfs - a compressed read only filesystem for Linux 81.480 -+ * 81.481 -+ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 81.482 -+ * Phillip Lougher <phillip@lougher.demon.co.uk> 81.483 -+ * 81.484 -+ * This program is free software; you can redistribute it and/or 81.485 -+ * modify it under the terms of the GNU General Public License 81.486 -+ * as published by the Free Software Foundation; either version 2, 81.487 -+ * or (at your option) any later version. 81.488 -+ * 81.489 -+ * This program is distributed in the hope that it will be useful, 81.490 -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 81.491 -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 81.492 -+ * GNU General Public License for more details. 81.493 -+ * 81.494 -+ * You should have received a copy of the GNU General Public License 81.495 -+ * along with this program; if not, write to the Free Software 81.496 -+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. 81.497 -+ * 81.498 -+ * lzma_wrapper.c 81.499 -+ */ 81.500 -+ 81.501 -+#include <asm/unaligned.h> 81.502 -+#include <linux/slab.h> 81.503 -+#include <linux/buffer_head.h> 81.504 -+#include <linux/mutex.h> 81.505 -+#include <linux/vmalloc.h> 81.506 -+#include <linux/decompress/unlzma.h> 81.507 -+ 81.508 -+#include "squashfs_fs.h" 81.509 -+#include "squashfs_fs_sb.h" 81.510 -+#include "squashfs_fs_i.h" 81.511 -+#include "squashfs.h" 81.512 -+#include "decompressor.h" 81.513 -+ 81.514 -+struct squashfs_lzma { 81.515 -+ void *input; 81.516 -+ void *output; 81.517 -+}; 81.518 -+ 81.519 -+/* decompress_unlzma.c is currently non re-entrant... */ 81.520 -+DEFINE_MUTEX(lzma_mutex); 81.521 -+ 81.522 -+/* decompress_unlzma.c doesn't provide any context in its callbacks... */ 81.523 -+static int lzma_error; 81.524 -+ 81.525 -+static void error(char *m) 81.526 -+{ 81.527 -+ ERROR("unlzma error: %s\n", m); 81.528 -+ lzma_error = 1; 81.529 -+} 81.530 -+ 81.531 -+ 81.532 -+static void *lzma_init(struct squashfs_sb_info *msblk) 81.533 -+{ 81.534 -+ struct squashfs_lzma *stream = kzalloc(sizeof(*stream), GFP_KERNEL); 81.535 -+ if (stream == NULL) 81.536 -+ goto failed; 81.537 -+ stream->input = vmalloc(msblk->block_size); 81.538 -+ if (stream->input == NULL) 81.539 -+ goto failed; 81.540 -+ stream->output = vmalloc(msblk->block_size); 81.541 -+ if (stream->output == NULL) 81.542 -+ goto failed2; 81.543 -+ 81.544 -+ return stream; 81.545 -+ 81.546 -+failed2: 81.547 -+ vfree(stream->input); 81.548 -+failed: 81.549 -+ ERROR("failed to allocate lzma workspace\n"); 81.550 -+ kfree(stream); 81.551 -+ return NULL; 81.552 -+} 81.553 -+ 81.554 -+ 81.555 -+static void lzma_free(void *strm) 81.556 -+{ 81.557 -+ struct squashfs_lzma *stream = strm; 81.558 -+ 81.559 -+ if (stream) { 81.560 -+ vfree(stream->input); 81.561 -+ vfree(stream->output); 81.562 -+ } 81.563 -+ kfree(stream); 81.564 -+} 81.565 -+ 81.566 -+ 81.567 -+static int lzma_uncompress(struct squashfs_sb_info *msblk, void **buffer, 81.568 -+ struct buffer_head **bh, int b, int offset, int length, int srclength, 81.569 -+ int pages) 81.570 -+{ 81.571 -+ struct squashfs_lzma *stream = msblk->stream; 81.572 -+ void *buff = stream->input; 81.573 -+ int avail, i, bytes = length, res; 81.574 -+ 81.575 -+ mutex_lock(&lzma_mutex); 81.576 -+ 81.577 -+ for (i = 0; i < b; i++) { 81.578 -+ wait_on_buffer(bh[i]); 81.579 -+ if (!buffer_uptodate(bh[i])) 81.580 -+ goto block_release; 81.581 -+ 81.582 -+ avail = min(bytes, msblk->devblksize - offset); 81.583 -+ memcpy(buff, bh[i]->b_data + offset, avail); 81.584 -+ buff += avail; 81.585 -+ bytes -= avail; 81.586 -+ offset = 0; 81.587 -+ put_bh(bh[i]); 81.588 -+ } 81.589 -+ 81.590 -+ lzma_error = 0; 81.591 -+ res = unlzma(stream->input, length, NULL, NULL, stream->output, NULL, 81.592 -+ error); 81.593 -+ if (res || lzma_error) 81.594 -+ goto failed; 81.595 -+ 81.596 -+ /* uncompressed size is stored in the LZMA header (5 byte offset) */ 81.597 -+ res = bytes = get_unaligned_le32(stream->input + 5); 81.598 -+ for (i = 0, buff = stream->output; bytes && i < pages; i++) { 81.599 -+ avail = min_t(int, bytes, PAGE_CACHE_SIZE); 81.600 -+ memcpy(buffer[i], buff, avail); 81.601 -+ buff += avail; 81.602 -+ bytes -= avail; 81.603 -+ } 81.604 -+ if (bytes) 81.605 -+ goto failed; 81.606 -+ 81.607 -+ mutex_unlock(&lzma_mutex); 81.608 -+ return res; 81.609 -+ 81.610 -+block_release: 81.611 -+ for (; i < b; i++) 81.612 -+ put_bh(bh[i]); 81.613 -+ 81.614 -+failed: 81.615 -+ mutex_unlock(&lzma_mutex); 81.616 -+ 81.617 -+ ERROR("lzma decompression failed, data probably corrupt\n"); 81.618 -+ return -EIO; 81.619 -+} 81.620 -+ 81.621 -+const struct squashfs_decompressor squashfs_lzma_comp_ops = { 81.622 -+ .init = lzma_init, 81.623 -+ .free = lzma_free, 81.624 -+ .decompress = lzma_uncompress, 81.625 -+ .id = LZMA_COMPRESSION, 81.626 -+ .name = "lzma", 81.627 -+ .supported = 1 81.628 -+}; 81.629 -+ 81.630 - 81.631 ---- linux-2.6.34/fs/squashfs/squashfs.h 81.632 -+++ linux-2.6.34/fs/squashfs/squashfs.h 81.633 -@@ -94,3 +94,6 @@ 81.634 - 81.635 - /* zlib_wrapper.c */ 81.636 - extern const struct squashfs_decompressor squashfs_zlib_comp_ops; 81.637 -+ 81.638 -+/* lzma wrapper.c */ 81.639 -+extern const struct squashfs_decompressor squashfs_lzma_comp_ops; 81.640 - 81.641 ---- linux-2.6.34/lib/Makefile 81.642 -+++ linux-2.6.34/lib/Makefile 81.643 -@@ -69,7 +69,7 @@ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ 81.644 - 81.645 - lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o 81.646 - lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o 81.647 --lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o 81.648 -+obj-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o 81.649 - lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o 81.650 - 81.651 - obj-$(CONFIG_TEXTSEARCH) += textsearch.o 81.652 -
82.1 --- a/kernel-modular/stuff/linux-unlzma-2.6.37.u Thu Jul 18 13:24:21 2013 +0000 82.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 82.3 @@ -1,268 +0,0 @@ 82.4 ---- linux-2.6.30.4/init/initramfs.c 82.5 -+++ linux-2.6.30.4/init/initramfs.c 82.6 -@@ -425,7 +425,8 @@ 82.7 - return len - count; 82.8 - } 82.9 - 82.10 --static int __init flush_buffer(void *bufv, unsigned len) 82.11 -+#define flush_buffer cpio_flush_buffer 82.12 -+int __init flush_buffer(void *bufv, unsigned len) 82.13 - { 82.14 - char *buf = (char *) bufv; 82.15 - int written; 82.16 - 82.17 ---- linux-2.6.30.4/lib/decompress_unlzma.c 82.18 -+++ linux-2.6.30.4/lib/decompress_unlzma.c 82.19 -@@ -278,6 +278,10 @@ 82.20 - size_t global_pos; 82.21 - int(*flush)(void*, unsigned int); 82.22 - struct lzma_header *header; 82.23 -+ int is_cpio_flush; 82.24 -+ uint8_t **buffer_index; 82.25 -+ int next_index; 82.26 -+ int max_index; 82.27 - }; 82.28 - 82.29 - struct cstate { 82.30 -@@ -294,6 +298,14 @@ 82.31 - static inline uint8_t INIT peek_old_byte(struct writer *wr, 82.32 - uint32_t offs) 82.33 - { 82.34 -+ if (wr->is_cpio_flush) { 82.35 -+ int32_t pos; 82.36 -+ while (offs > wr->header->dict_size) 82.37 -+ offs -= wr->header->dict_size; 82.38 -+ pos = wr->buffer_pos - offs; 82.39 -+ return wr->buffer_index[pos / LZMA_IOBUF_SIZE] 82.40 -+ [pos % LZMA_IOBUF_SIZE]; 82.41 -+ } 82.42 - if (!wr->flush) { 82.43 - int32_t pos; 82.44 - while (offs > wr->header->dict_size) 82.45 -@@ -309,8 +321,41 @@ 82.46 - 82.47 - } 82.48 - 82.49 -+static inline void INIT write_byte_if_cpio(struct writer *wr, uint8_t byte) 82.50 -+{ 82.51 -+ if (wr->buffer_pos % LZMA_IOBUF_SIZE == 0) { 82.52 -+ // if the following large_malloc fails, the initramfs 82.53 -+ // whould not be load with is_cpio_flush forced 0 too. 82.54 -+ // Remember we do not allocate historic buffer. 82.55 -+ // Let's assume it will never fail ! 82.56 -+ if (wr->next_index >= wr->max_index) { 82.57 -+ // realloc wr->buffer_index 82.58 -+ uint8_t **p = wr->buffer_index; 82.59 -+ wr->buffer_index = (uint8_t **) 82.60 -+ large_malloc(LZMA_IOBUF_SIZE + 82.61 -+ sizeof(*p) * wr->max_index); 82.62 -+ if (wr->max_index) { 82.63 -+ memcpy(wr->buffer_index, p, 82.64 -+ sizeof(*p) * wr->max_index); 82.65 -+ free(p); 82.66 -+ } 82.67 -+ wr->max_index += LZMA_IOBUF_SIZE / sizeof(*p); 82.68 -+ } 82.69 -+ wr->buffer_index[wr->next_index++] = 82.70 -+ (uint8_t *) large_malloc(LZMA_IOBUF_SIZE); 82.71 -+ } 82.72 -+ wr->buffer_index[wr->buffer_pos / LZMA_IOBUF_SIZE] 82.73 -+ [wr->buffer_pos % LZMA_IOBUF_SIZE] = 82.74 -+ wr->previous_byte = byte; 82.75 -+ wr->buffer_pos++; 82.76 -+} 82.77 -+ 82.78 - static inline void INIT write_byte(struct writer *wr, uint8_t byte) 82.79 - { 82.80 -+ if (wr->is_cpio_flush) { 82.81 -+ write_byte_if_cpio(wr, byte); 82.82 -+ return; 82.83 -+ } 82.84 - wr->buffer[wr->buffer_pos++] = wr->previous_byte = byte; 82.85 - if (wr->flush && wr->buffer_pos == wr->header->dict_size) { 82.86 - wr->buffer_pos = 0; 82.87 -@@ -328,7 +373,21 @@ 82.88 - static inline void INIT copy_bytes(struct writer *wr, 82.89 - uint32_t rep0, int len) 82.90 - { 82.91 -- do { 82.92 -+ if (wr->is_cpio_flush) { 82.93 -+ int32_t pos; 82.94 -+ uint32_t offs = rep0; 82.95 -+ while (offs > wr->header->dict_size) 82.96 -+ offs -= wr->header->dict_size; 82.97 -+ pos = wr->buffer_pos - offs; 82.98 -+ do { 82.99 -+ write_byte_if_cpio(wr, 82.100 -+ wr->buffer_index[pos / LZMA_IOBUF_SIZE] 82.101 -+ [pos % LZMA_IOBUF_SIZE]); 82.102 -+ pos++; 82.103 -+ len--; 82.104 -+ } while (len != 0 && wr->buffer_pos < wr->header->dst_size); 82.105 -+ } 82.106 -+ else do { 82.107 - copy_byte(wr, rep0); 82.108 - len--; 82.109 - } while (len != 0 && wr->buffer_pos < wr->header->dst_size); 82.110 -@@ -339,6 +398,9 @@ 82.111 - int pos_state, uint16_t *prob, 82.112 - int lc, uint32_t literal_pos_mask) { 82.113 - int mi = 1; 82.114 -+ static const int state[LZMA_NUM_STATES] = 82.115 -+ { 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5 }; 82.116 -+ 82.117 - rc_update_bit_0(rc, prob); 82.118 - prob = (p + LZMA_LITERAL + 82.119 - (LZMA_LIT_SIZE 82.120 -@@ -369,18 +431,13 @@ 82.121 - rc_get_bit(rc, prob_lit, &mi); 82.122 - } 82.123 - write_byte(wr, mi); 82.124 -- if (cst->state < 4) 82.125 -- cst->state = 0; 82.126 -- else if (cst->state < 10) 82.127 -- cst->state -= 3; 82.128 -- else 82.129 -- cst->state -= 6; 82.130 -+ cst->state = state[cst->state]; 82.131 - } 82.132 - 82.133 - static inline void INIT process_bit1(struct writer *wr, struct rc *rc, 82.134 - struct cstate *cst, uint16_t *p, 82.135 - int pos_state, uint16_t *prob) { 82.136 -- int offset; 82.137 -+ int offset; 82.138 - uint16_t *prob_len; 82.139 - int num_bits; 82.140 - int len; 82.141 -@@ -396,7 +453,7 @@ 82.142 - prob = p + LZMA_LEN_CODER; 82.143 - } else { 82.144 - rc_update_bit_1(rc, prob); 82.145 -- prob = p + LZMA_IS_REP_G0 + cst->state; 82.146 -+ prob += LZMA_IS_REP_G0 - LZMA_IS_REP; 82.147 - if (rc_is_bit_0(rc, prob)) { 82.148 - rc_update_bit_0(rc, prob); 82.149 - prob = (p + LZMA_IS_REP_0_LONG 82.150 -@@ -417,13 +474,13 @@ 82.151 - uint32_t distance; 82.152 - 82.153 - rc_update_bit_1(rc, prob); 82.154 -- prob = p + LZMA_IS_REP_G1 + cst->state; 82.155 -+ prob += LZMA_IS_REP_G1 - LZMA_IS_REP_G0; 82.156 - if (rc_is_bit_0(rc, prob)) { 82.157 - rc_update_bit_0(rc, prob); 82.158 - distance = cst->rep1; 82.159 - } else { 82.160 - rc_update_bit_1(rc, prob); 82.161 -- prob = p + LZMA_IS_REP_G2 + cst->state; 82.162 -+ prob += LZMA_IS_REP_G2 - LZMA_IS_REP_G1; 82.163 - if (rc_is_bit_0(rc, prob)) { 82.164 - rc_update_bit_0(rc, prob); 82.165 - distance = cst->rep2; 82.166 -@@ -444,24 +501,24 @@ 82.167 - prob_len = prob + LZMA_LEN_CHOICE; 82.168 - if (rc_is_bit_0(rc, prob_len)) { 82.169 - rc_update_bit_0(rc, prob_len); 82.170 -- prob_len = (prob + LZMA_LEN_LOW 82.171 -+ prob_len += LZMA_LEN_LOW - LZMA_LEN_CHOICE 82.172 - + (pos_state << 82.173 -- LZMA_LEN_NUM_LOW_BITS)); 82.174 -+ LZMA_LEN_NUM_LOW_BITS); 82.175 - offset = 0; 82.176 - num_bits = LZMA_LEN_NUM_LOW_BITS; 82.177 - } else { 82.178 - rc_update_bit_1(rc, prob_len); 82.179 -- prob_len = prob + LZMA_LEN_CHOICE_2; 82.180 -+ prob_len += LZMA_LEN_CHOICE_2 - LZMA_LEN_CHOICE; 82.181 - if (rc_is_bit_0(rc, prob_len)) { 82.182 - rc_update_bit_0(rc, prob_len); 82.183 -- prob_len = (prob + LZMA_LEN_MID 82.184 -+ prob_len += LZMA_LEN_MID - LZMA_LEN_CHOICE_2 82.185 - + (pos_state << 82.186 -- LZMA_LEN_NUM_MID_BITS)); 82.187 -+ LZMA_LEN_NUM_MID_BITS); 82.188 - offset = 1 << LZMA_LEN_NUM_LOW_BITS; 82.189 - num_bits = LZMA_LEN_NUM_MID_BITS; 82.190 - } else { 82.191 - rc_update_bit_1(rc, prob_len); 82.192 -- prob_len = prob + LZMA_LEN_HIGH; 82.193 -+ prob_len += LZMA_LEN_HIGH - LZMA_LEN_CHOICE_2; 82.194 - offset = ((1 << LZMA_LEN_NUM_LOW_BITS) 82.195 - + (1 << LZMA_LEN_NUM_MID_BITS)); 82.196 - num_bits = LZMA_LEN_NUM_HIGH_BITS; 82.197 -@@ -529,6 +586,7 @@ 82.198 - void(*error_fn)(char *x) 82.199 - ) 82.200 - { 82.201 -+ extern int cpio_flush_buffer(void*, unsigned int); 82.202 - struct lzma_header header; 82.203 - int lc, pb, lp; 82.204 - uint32_t pos_state_mask; 82.205 -@@ -563,6 +621,10 @@ 82.206 - wr.global_pos = 0; 82.207 - wr.previous_byte = 0; 82.208 - wr.buffer_pos = 0; 82.209 -+ wr.is_cpio_flush = 0; 82.210 -+ if (flush == cpio_flush_buffer) 82.211 -+ wr.is_cpio_flush = 1; 82.212 -+ wr.buffer_index = NULL; 82.213 - 82.214 - rc_init(&rc, fill, inbuf, in_len); 82.215 - 82.216 -@@ -596,23 +658,23 @@ 82.217 - if (header.dict_size == 0) 82.218 - header.dict_size = 1; 82.219 - 82.220 -- if (output) 82.221 -+ if (output || wr.is_cpio_flush) 82.222 - wr.buffer = output; 82.223 - else { 82.224 - wr.bufsize = MIN(header.dst_size, header.dict_size); 82.225 - wr.buffer = large_malloc(wr.bufsize); 82.226 - } 82.227 -- if (wr.buffer == NULL) 82.228 -+ if (wr.buffer == NULL && !wr.is_cpio_flush) 82.229 - goto exit_1; 82.230 - 82.231 - num_probs = LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)); 82.232 - p = (uint16_t *) large_malloc(num_probs * sizeof(*p)); 82.233 - if (p == 0) 82.234 - goto exit_2; 82.235 -- num_probs = LZMA_LITERAL + (LZMA_LIT_SIZE << (lc + lp)); 82.236 -+ num_probs += LZMA_LITERAL - LZMA_BASE_SIZE; 82.237 - for (i = 0; i < num_probs; i++) 82.238 - p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1; 82.239 -- 82.240 -+ wr.max_index = wr.next_index = 0; 82.241 - rc_init_code(&rc); 82.242 - 82.243 - while (get_pos(&wr) < header.dst_size) { 82.244 -@@ -631,12 +693,25 @@ 82.245 - 82.246 - if (posp) 82.247 - *posp = rc.ptr-rc.buffer; 82.248 -- if (wr.flush) 82.249 -+ if (wr.is_cpio_flush) { 82.250 -+ int i; 82.251 -+ for (i = 0; i < wr.next_index -1; i++) { 82.252 -+ wr.flush(wr.buffer_index[i], LZMA_IOBUF_SIZE); 82.253 -+ large_free(wr.buffer_index[i]); 82.254 -+ } 82.255 -+ if (i < wr.next_index) { 82.256 -+ wr.flush(wr.buffer_index[i], 82.257 -+ wr.buffer_pos % LZMA_IOBUF_SIZE); 82.258 -+ large_free(wr.buffer_index[i]); 82.259 -+ } 82.260 -+ large_free(wr.buffer_index); 82.261 -+ } 82.262 -+ else if (wr.flush) 82.263 - wr.flush(wr.buffer, wr.buffer_pos); 82.264 - ret = 0; 82.265 - large_free(p); 82.266 - exit_2: 82.267 -- if (!output) 82.268 -+ if (!output && !wr.is_cpio_flush) 82.269 - large_free(wr.buffer); 82.270 - exit_1: 82.271 - if (!buf)
83.1 --- a/kernel-modular/stuff/list_modules.sh Thu Jul 18 13:24:21 2013 +0000 83.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 83.3 @@ -1,43 +0,0 @@ 83.4 -#!/bin/sh 83.5 -# list_modules.sh: list Linux kernel modules for SliTaz GNU/Linux. 83.6 -# 2008/06/07 <pascal.bellard@slitaz.org> - GNU General Public License. 83.7 -# 83.8 - 83.9 -find_modules() 83.10 -{ 83.11 -find $_pkg/lib/modules/*-slitaz/kernel/$1 -type f -exec basename {} \; 83.12 -} 83.13 - 83.14 -if [ -z "$1" ] ; then 83.15 - cat 1>&2 <<EOT 83.16 - 83.17 -\033[1musage:\033[0m `basename $0` path/to/kernel-modules-subtrees 83.18 -exemple `basename $0` drivers/net/wireless >list 83.19 - 83.20 -EOT 83.21 - exit 1 83.22 -fi 83.23 - 83.24 -if [ -z "$(ls -d $_pkg/lib/modules/*-slitaz/kernel/$1 2> /dev/null)" ] ; then 83.25 - cat 1>&2 <<EOT 83.26 - 83.27 -Error : $1 does not exist. 83.28 - 83.29 -EOT 83.30 - exit 1 83.31 -fi 83.32 - 83.33 -for tree in $@; do 83.34 - for module in $(find_modules $tree) ; do 83.35 - grep /$module: $_pkg/lib/modules/*-slitaz/modules.dep || 83.36 - find $_pkg/lib/modules/*-slitaz/kernel/$tree -name $module 83.37 - done | awk '{ for (i = 1; i <= NF; i++) print $i; }' 83.38 -done | sort | uniq | sed -e 's,.*slitaz/,,' -e 's,^kernel/,,' -e 's/:$//' | \ 83.39 -while read module; do 83.40 - grep -qs ^$module$ $src/modules.list && continue 83.41 - if [ ! -f $_pkg/lib/modules/*-slitaz/kernel/$module ]; then 83.42 - (cd $_pkg/lib/modules/*-slitaz/kernel; find -name $(basename $module) ) 83.43 - else 83.44 - echo $module 83.45 - fi 83.46 -done
84.1 --- a/kernel-modular/stuff/modules-2.6.37.list Thu Jul 18 13:24:21 2013 +0000 84.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 84.3 @@ -1,143 +0,0 @@ 84.4 -drivers/acpi/video.ko.gz 84.5 -drivers/acpi/button.ko.gz 84.6 -drivers/char/genrtc.ko.gz 84.7 -drivers/char/i8k.ko.gz 84.8 -drivers/char/lp.ko.gz 84.9 -drivers/char/rtc.ko.gz 84.10 -drivers/hwmon/coretemp.ko.gz 84.11 -drivers/hwmon/hwmon.ko.gz 84.12 -drivers/hwmon/k8temp.ko.gz 84.13 -drivers/input/mouse/inport.ko.gz 84.14 -drivers/input/mouse/logibm.ko.gz 84.15 -drivers/input/mouse/pc110pad.ko.gz 84.16 -drivers/net/3c501.ko.gz 84.17 -drivers/net/3c503.ko.gz 84.18 -drivers/net/3c505.ko.gz 84.19 -drivers/net/3c509.ko.gz 84.20 -drivers/net/3c515.ko.gz 84.21 -drivers/net/3c59x.ko.gz 84.22 -drivers/net/82596.ko.gz 84.23 -drivers/net/amd8111e.ko.gz 84.24 -drivers/net/arcnet/arcnet.ko.gz 84.25 -drivers/net/arcnet/com90xx.ko.gz 84.26 -drivers/net/arcnet/rfc1201.ko.gz 84.27 -drivers/net/atl1c/atl1c.ko.gz 84.28 -drivers/net/atl1e/atl1e.ko.gz 84.29 -drivers/net/atlx/atl2.ko.gz 84.30 -drivers/net/bnx2.ko.gz 84.31 -drivers/net/cassini.ko.gz 84.32 -drivers/net/cs89x0.ko.gz 84.33 -drivers/net/depca.ko.gz 84.34 -drivers/net/dl2k.ko.gz 84.35 -drivers/net/e1000/e1000.ko.gz 84.36 -drivers/net/e2100.ko.gz 84.37 -drivers/net/eepro.ko.gz 84.38 -drivers/net/eexpress.ko.gz 84.39 -drivers/net/eth16i.ko.gz 84.40 -drivers/net/ewrk3.ko.gz 84.41 -drivers/net/fealnx.ko.gz 84.42 -drivers/net/hp100.ko.gz 84.43 -drivers/net/hp.ko.gz 84.44 -drivers/net/hp-plus.ko.gz 84.45 -drivers/net/ipg.ko.gz 84.46 -drivers/net/lance.ko.gz 84.47 -drivers/net/lp486e.ko.gz 84.48 -drivers/net/ne.ko.gz 84.49 -drivers/net/ni52.ko.gz 84.50 -drivers/net/ni65.ko.gz 84.51 -drivers/net/pcmcia/3c574_cs.ko.gz 84.52 -drivers/net/pcmcia/3c589_cs.ko.gz 84.53 -drivers/net/pcmcia/axnet_cs.ko.gz 84.54 -drivers/net/pcmcia/fmvj18x_cs.ko.gz 84.55 -drivers/net/pcmcia/nmclan_cs.ko.gz 84.56 -drivers/net/pcmcia/pcnet_cs.ko.gz 84.57 -drivers/net/pcmcia/smc91c92_cs.ko.gz 84.58 -drivers/net/pcmcia/xirc2ps_cs.ko.gz 84.59 -drivers/net/phy/broadcom.ko.gz 84.60 -drivers/net/phy/cicada.ko.gz 84.61 -drivers/net/phy/davicom.ko.gz 84.62 -drivers/net/phy/libphy.ko.gz 84.63 -drivers/net/phy/lxt.ko.gz 84.64 -drivers/net/phy/marvell.ko.gz 84.65 -drivers/net/phy/qsemi.ko.gz 84.66 -drivers/net/phy/smsc.ko.gz 84.67 -drivers/net/dnet.ko.gz 84.68 -drivers/net/sc92031.ko.gz 84.69 -drivers/net/sis190.ko.gz 84.70 -drivers/net/skge.ko.gz 84.71 -drivers/net/sky2.ko.gz 84.72 -drivers/net/smc9194.ko.gz 84.73 -drivers/net/smc-ultra.ko.gz 84.74 -drivers/net/starfire.ko.gz 84.75 -drivers/net/sungem.ko.gz 84.76 -drivers/net/sungem_phy.ko.gz 84.77 -drivers/net/sunhme.ko.gz 84.78 -drivers/net/tg3.ko.gz 84.79 -drivers/net/tulip/tulip.ko.gz 84.80 -drivers/net/tulip/uli526x.ko.gz 84.81 -drivers/net/typhoon.ko.gz 84.82 -drivers/net/usb/asix.ko.gz 84.83 -drivers/net/usb/cdc_ether.ko.gz 84.84 -drivers/net/usb/cdc_subset.ko.gz 84.85 -drivers/net/usb/net1080.ko.gz 84.86 -drivers/net/usb/rndis_host.ko.gz 84.87 -drivers/net/usb/usbnet.ko.gz 84.88 -drivers/net/usb/zaurus.ko.gz 84.89 -drivers/net/usb/cdc_eem.ko.gz 84.90 -drivers/net/usb/dm9601.ko.gz 84.91 -drivers/net/via-velocity.ko.gz 84.92 -drivers/net/wd.ko.gz 84.93 -drivers/net/8390p.ko.gz 84.94 -drivers/net/b44.ko.gz 84.95 -drivers/net/r6040.ko.gz 84.96 -drivers/net/vmxnet3/vmxnet3.ko.gz 84.97 -drivers/net/usb/int51x1.ko.gz 84.98 -drivers/net/usb/ipheth.ko.gz 84.99 -drivers/net/usb/smsc75xx.ko.gz 84.100 -drivers/net/smsc9420.ko.gz 84.101 -drivers/ide/ide-cs.ko.gz 84.102 -drivers/watchdog/softdog.ko.gz 84.103 -drivers/parport/parport.ko.gz 84.104 -drivers/parport/parport_pc.ko.gz 84.105 -drivers/pcmcia/i82092.ko.gz 84.106 -drivers/pcmcia/i82365.ko.gz 84.107 -drivers/pcmcia/pcmcia_core.ko.gz 84.108 -drivers/pcmcia/pcmcia.ko.gz 84.109 -drivers/pcmcia/pcmcia_rsrc.ko.gz 84.110 -drivers/pcmcia/pd6729.ko.gz 84.111 -drivers/pcmcia/yenta_socket.ko.gz 84.112 -drivers/usb/class/cdc-acm.ko.gz 84.113 -drivers/usb/class/usblp.ko.gz 84.114 -drivers/usb/serial/ch341.ko.gz 84.115 -drivers/usb/serial/pl2303.ko.gz 84.116 -drivers/usb/serial/usbserial.ko.gz 84.117 -drivers/usb/mon/usbmon.ko.gz 84.118 -drivers/usb/host/xhci-hcd.ko.gz 84.119 -drivers/ssb/ssb.ko.gz 84.120 -drivers/block/floppy.ko.gz 84.121 -drivers/input/mouse/sermouse.ko.gz 84.122 -drivers/video/output.ko.gz 84.123 -fs/binfmt_misc.ko.gz 84.124 -fs/fat/msdos.ko.gz 84.125 -fs/fuse/cuse.ko.gz 84.126 -net/ipv4/netfilter/ipt_REJECT.ko.gz 84.127 -net/netfilter/nfnetlink.ko.gz 84.128 -net/netfilter/nfnetlink_log.ko.gz 84.129 -lib/crc7.ko.gz 84.130 -drivers/misc/cb710/cb710.ko.gz 84.131 -drivers/misc/tifm_core.ko.gz 84.132 -drivers/leds/led-class.ko.gz 84.133 -net/llc/llc.ko.gz 84.134 -drivers/mmc/core/mmc_core.ko.gz 84.135 -net/rfkill/rfkill.ko.gz 84.136 -net/sunrpc/auth_gss/auth_rpcgss.ko.gz 84.137 -net/sunrpc/auth_gss/rpcsec_gss_krb5.ko.gz 84.138 -net/netfilter/nf_conntrack.ko.gz 84.139 -drivers/input/gameport/gameport.ko.gz 84.140 -drivers/i2c/i2c-core.ko.gz 84.141 -sound/soundcore.ko.gz 84.142 -sound/ac97_bus.ko.gz 84.143 -sound/core/snd.ko.gz 84.144 -lib/libcrc32c.ko.gz 84.145 -lib/crc-itu-t.ko.gz 84.146 -lib/raid6/raid6_pq.ko.gz
85.1 --- a/kernel-usbstorage/receipt Thu Jul 18 13:24:21 2013 +0000 85.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 85.3 @@ -1,20 +0,0 @@ 85.4 -# SliTaz package receipt. 85.5 - 85.6 -PACKAGE="kernel-usbstorage" 85.7 -VERSION="2.6.37" 85.8 -CATEGORY="base-system" 85.9 -SHORT_DESC="Kernel i386 with ppp, ne2k-isa, 3c509, pcmcia, usbstorage, ide and ext3" 85.10 -MAINTAINER="devel@slitaz.org" 85.11 -LICENSE="GPL2" 85.12 -WEB_SITE="http://www.kernel.org/" 85.13 -WANTED="kernel-modular" 85.14 - 85.15 -# Rules to gen a SliTaz package suitable for Tazpkg. 85.16 -genpkg_rules() 85.17 -{ 85.18 - mkdir $fs/boot 85.19 - cp -a $WOK/kernel-modular/linux-$VERSION/$PACKAGE $fs/boot/bzImage 85.20 - cp -a $WOK/kernel-modular/linux-$VERSION/System.map-${PACKAGE#kernel-} $fs/boot/System.map 85.21 - cp -a $WOK/kernel-modular/linux-$VERSION/config-${PACKAGE#kernel-} $fs/boot/config 85.22 - cp -a $WOK/kernel-modular/linux-$VERSION/config-busybox $fs/boot 85.23 -}
86.1 --- a/lan-config/receipt Thu Jul 18 13:24:21 2013 +0000 86.2 +++ b/lan-config/receipt Fri Oct 02 21:45:05 2015 +0200 86.3 @@ -2,37 +2,30 @@ 86.4 86.5 PACKAGE="lan-config" 86.6 VERSION="1.0" 86.7 -CATEGORY="configuration" 86.8 +CATEGORY="meta" 86.9 SHORT_DESC="Tiny SliTaz lan ip configuration (2nd ethernet card)" 86.10 MAINTAINER="pascal.bellard@slitaz.org" 86.11 LICENSE="BSD" 86.12 WEB_SITE="http://tiny.slitaz.org/" 86.13 +WANTED="base-tiny" 86.14 CONFIG_FILES="/etc/network.conf" 86.15 86.16 # Rules to configure and make the package. 86.17 compile_rules() 86.18 { 86.19 - while read pkg file ; do 86.20 - if [ ! -s $pkg*/fs$file ]; then 86.21 - tazpkg get $pkg 86.22 - tazpkg extract $pkg*.tazpkg 86.23 - fi 86.24 - mkdir -p fs$(dirname $file) 86.25 - mv $pkg*/fs$file fs$(dirname $file) || return 1 86.26 - done << EOT 86.27 -slitaz-boot-scripts /etc/init.d/network.sh 86.28 -slitaz-boot-scripts /etc/network.conf 86.29 -EOT 86.30 + mkdir -p $stuff/etc/init.d 2> /dev/null 86.31 + cp $wanted_stuff/etc/init.d/network.sh $stuff/etc/init.d/ 86.32 + cp $wanted_stuff/etc/network.conf $stuff/etc/ 86.33 sed -i -e 's#^dhcp(.*#&\ 86.34 if [ "$LAN_DHCP" = "yes" ] ; then\ 86.35 echo "Starting udhcpc client on: $LAN_INTERFACE..."\ 86.36 - /sbin/udhcpc -b -T 1 -A 12 -i $LAN_INTERFACE -p /var/run/udhcpc.$LAN_INTERFACE.pid\ 86.37 + udhcpc -b -T 1 -A 12 -i $LAN_INTERFACE -p /var/run/udhcpc.$LAN_INTERFACE.pid\ 86.38 fi#' -e 's#^static_ip(.*#&\ 86.39 if [ "$LAN_STATIC" = "yes" ] ; then\ 86.40 echo "Configuring static IP on $LAN_INTERFACE: $LAN_IP..."\ 86.41 - /sbin/ifconfig $LAN_INTERFACE $LAN_IP netmask $LAN_NETMASK up\ 86.42 - fi#' fs/etc/init.d/network.sh 86.43 - cat >> fs/etc/network.conf <<EOT 86.44 + ifconfig $LAN_INTERFACE $LAN_IP netmask $LAN_NETMASK up\ 86.45 + fi#' $stuff/etc/init.d/network.sh 86.46 + cat >> $stuff/etc/network.conf <<EOT 86.47 86.48 # Set lan interface. 86.49 LAN_INTERFACE="eth1" 86.50 @@ -55,7 +48,7 @@ 86.51 # Rules to gen a SliTaz package suitable for Tazpkg. 86.52 genpkg_rules() 86.53 { 86.54 - cp -a fs/. $fs 86.55 + cp -a $stuff/. $fs 86.56 } 86.57 86.58 config_form()
87.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 87.2 +++ b/linux/receipt Fri Oct 02 21:45:05 2015 +0200 87.3 @@ -0,0 +1,88 @@ 87.4 +# SliTaz package receipt. 87.5 + 87.6 +PACKAGE="linux" 87.7 +VERSION="2.6.14" 87.8 +CATEGORY="base-system" 87.9 +SHORT_DESC="The Linux kernel." 87.10 +TARGET="i486" 87.11 +MAINTAINER="devel@slitaz.org" 87.12 +LICENSE="GPL2" 87.13 +TARBALL="$PACKAGE-$VERSION.tar.bz2" 87.14 +WEB_SITE="http://www.kernel.org/" 87.15 +WGET_URL="https://www.kernel.org/pub/linux/kernel/v${VERSION:0:3}/$TARBALL" 87.16 +WEB_SITE2="http://elinux.org/Linux_Tiny" 87.17 +PATCH="https://www.selenic.com/tiny/2.6.14-tiny1.patch.bz2" 87.18 +AUTO_SELECTION="always" 87.19 + 87.20 +BUILD_DEPENDS="slitaz-toolchain perl git lzma wget gcc2 advancecomp" 87.21 + 87.22 +# Rules to configure and make the package. 87.23 +compile_rules() 87.24 +{ 87.25 + [ -s $SRC/$(basename $PATCH) ] || 87.26 + wget --no-check-certificate -O $SRC/$(basename $PATCH) $PATCH 87.27 + bzcat $SRC/$(basename $PATCH) | patch -p1 87.28 + sed -i 's|\([>\.]\)val|\1u.val|;s|\([>\.]\)next|\1u.next|;216s|};|} u;|' lib/inflate.c 87.29 + sed '/DEBUG/,/* kstrdup/d' < mm/slab.c > mm/kstrdup.c 87.30 + echo 'obj-y += kstrdup.o' >> mm/Makefile 87.31 + sed -i 's|3.1024|11*256|' arch/i386/boot/compressed/misc.c 87.32 + which advdef 2> /dev/null && 87.33 + sed -i 's|gzip)|&\n advdef -z4 $@|' usr/Makefile arch/i386/boot/compressed/Makefile 87.34 + 87.35 + if [ ! -s $WOK/busybox/source/busybox*/rootfs.cpio ]; then 87.36 + tazwok cook busybox 87.37 + fi 87.38 + cp $WOK/busybox/source/busybox*/rootfs.cpio $src 87.39 + cp $WOK/busybox/source/busybox*/.config $src/config-busybox 87.40 + mkdir $src/slitaz 87.41 + cp $stuff/list_modules.sh $src/slitaz 87.42 + 87.43 + sed -i 's/^config %config/config/' Makefile 87.44 + cp $stuff/linux-$VERSION-slitaz.config .config 87.45 + yes '' | make ARCH=i386 HOSTCC=gcc-2 config 87.46 + make ARCH=i386 CC=gcc-2 HOSTCC=gcc-2 -j 4 bzImage 87.47 + grep -q "CONFIG_MODULES=y" .config && 87.48 + make ARCH=i386 CC=gcc-2 HOSTCC=gcc-2 -j 4 modules && 87.49 + make ARCH=i386 INSTALL_MOD_PATH=$DESTDIR -j 1 modules_install || true 87.50 +} 87.51 + 87.52 +# Rules to gen a SliTaz package suitable for Tazpkg. 87.53 +genpkg_rules() 87.54 +{ 87.55 + mkdir $fs/boot 87.56 + cp -a $src/arch/i386/boot/bzImage $fs/boot/ 87.57 + cp -a $src/System.map $fs/boot/ 87.58 + cp -a $src/.config $fs/boot/config 87.59 + cp -a $src/config-busybox $fs/boot 87.60 +} 87.61 + 87.62 +# Pre and post install commands for Tazpkg. 87.63 +post_install() 87.64 +{ 87.65 + echo "Processing post-install commands..." 87.66 + chroot "$1/" depmod -a $VERSION-slitaz 87.67 + # GRUB stuff. 87.68 + if [ -f "$1/boot/grub/menu.lst" ]; then 87.69 + root_dev=`cat $1/boot/grub/menu.lst | grep root= | sed 's/.*root=\([^ ]*\).*/\1/' | head -n 1` 87.70 + grub_dev=`cat $1/boot/grub/menu.lst | grep "root (" | head -n 1` 87.71 + # Add new kernel entry in case of upgrade for installed system. 87.72 + if ! grep -q $SOURCE-$VERSION-slitaz $1/boot/grub/menu.lst; then 87.73 + cat >> $1/boot/grub/menu.lst << EOT 87.74 + 87.75 +title SliTaz GNU/Linux (Kernel $VERSION-slitaz) 87.76 +$grub_dev 87.77 +kernel /boot/vmlinuz-$VERSION-slitaz root=$root_dev 87.78 +EOT 87.79 + fi 87.80 + # Display information message. 87.81 + cat <<EOT 87.82 +---- 87.83 +GRUB is installed, these tree lines must be in your /boot/grub/menu.lst: 87.84 + 87.85 +title SliTaz GNU/Linux (Kernel $VERSION-slitaz) 87.86 +$grub_dev 87.87 +kernel /boot/vmlinuz-$VERSION-slitaz root=$root_dev 87.88 +---- 87.89 +EOT 87.90 + fi 87.91 +}
88.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 88.2 +++ b/linux/stuff/linux-2.6.14-slitaz.config Fri Oct 02 21:45:05 2015 +0200 88.3 @@ -0,0 +1,1278 @@ 88.4 +# 88.5 +# Automatically generated make config: don't edit 88.6 +# Linux kernel version: 2.6.14-tiny1 88.7 +# Fri Oct 2 11:54:23 2015 88.8 +# 88.9 +CONFIG_X86=y 88.10 +CONFIG_SEMAPHORE_SLEEPERS=y 88.11 +CONFIG_MMU=y 88.12 +CONFIG_GENERIC_ISA_DMA=y 88.13 +CONFIG_GENERIC_IOMAP=y 88.14 +CONFIG_ARCH_MAY_HAVE_PC_FDC=y 88.15 + 88.16 +# 88.17 +# Code maturity level options 88.18 +# 88.19 +CONFIG_EXPERIMENTAL=y 88.20 +CONFIG_CLEAN_COMPILE=y 88.21 +CONFIG_BROKEN_ON_SMP=y 88.22 +CONFIG_INIT_ENV_ARG_LIMIT=32 88.23 + 88.24 +# 88.25 +# General setup 88.26 +# 88.27 +CONFIG_LOCALVERSION="-slitaz" 88.28 +CONFIG_LOCALVERSION_AUTO=y 88.29 +# CONFIG_SWAP is not set 88.30 +# CONFIG_SYSVIPC is not set 88.31 +# CONFIG_POSIX_MQUEUE is not set 88.32 +# CONFIG_BSD_PROCESS_ACCT is not set 88.33 +# CONFIG_SYSCTL is not set 88.34 +# CONFIG_AUDIT is not set 88.35 +# CONFIG_HOTPLUG is not set 88.36 +CONFIG_KOBJECT_UEVENT=y 88.37 +# CONFIG_IKCONFIG is not set 88.38 +CONFIG_INITRAMFS_SOURCE="rootfs.cpio" 88.39 +CONFIG_INITRAMFS_ROOT_UID=0 88.40 +CONFIG_INITRAMFS_ROOT_GID=0 88.41 +CONFIG_EMBEDDED=y 88.42 +# CONFIG_KALLSYMS is not set 88.43 +# CONFIG_PRINTK is not set 88.44 +# CONFIG_BUG is not set 88.45 +# CONFIG_KMALLOC_ACCOUNTING is not set 88.46 +# CONFIG_AUDIT_BOOTMEM is not set 88.47 +# CONFIG_DOUBLEFAULT is not set 88.48 +# CONFIG_PANIC is not set 88.49 +# CONFIG_ELF_CORE is not set 88.50 +CONFIG_BASE_FULL=y 88.51 +CONFIG_NET_SMALL=y 88.52 +# CONFIG_FUTEX is not set 88.53 +# CONFIG_EPOLL is not set 88.54 +# CONFIG_VM86 is not set 88.55 +# CONFIG_AIO is not set 88.56 +# CONFIG_SYSENTER is not set 88.57 +# CONFIG_XATTR is not set 88.58 +# CONFIG_FILE_LOCKING is not set 88.59 +CONFIG_UID16=y 88.60 +# CONFIG_ETHTOOL is not set 88.61 +# CONFIG_INETPEER is not set 88.62 +# CONFIG_NET_SK_FILTER is not set 88.63 +# CONFIG_NET_DEV_MULTICAST is not set 88.64 +# CONFIG_IGMP is not set 88.65 +# CONFIG_MEASURE_INLINES is not set 88.66 +CONFIG_CC_OPTIMIZE_FOR_SIZE=y 88.67 +# CONFIG_SHMEM is not set 88.68 +CONFIG_CC_ALIGN_FUNCTIONS=0 88.69 +CONFIG_CC_ALIGN_LABELS=0 88.70 +CONFIG_CC_ALIGN_LOOPS=0 88.71 +CONFIG_CC_ALIGN_JUMPS=0 88.72 +# CONFIG_TINY_CFLAGS is not set 88.73 +# CONFIG_CRC32_TABLES is not set 88.74 +# CONFIG_INLINE_THREADINFO is not set 88.75 +# CONFIG_SLAB is not set 88.76 +# CONFIG_MEMPOOL is not set 88.77 +CONFIG_CONSOLE_TRANSLATIONS=y 88.78 +CONFIG_BINFMT_SCRIPT=y 88.79 +# CONFIG_BINFMT_ELF_AOUT is not set 88.80 +CONFIG_MAX_SWAPFILES_SHIFT=0 88.81 +CONFIG_NR_LDISCS=1 88.82 +CONFIG_MAX_USER_RT_PRIO=10 88.83 +CONFIG_IDE_HWIFS=1 88.84 +# CONFIG_BOOTFLAG is not set 88.85 +CONFIG_SERIAL_PCI=y 88.86 +# CONFIG_DMI_SCAN is not set 88.87 +# CONFIG_PCI_QUIRKS is not set 88.88 +# CONFIG_X86_TSC_TIMER is not set 88.89 +CONFIG_PROCESSOR_SELECT=y 88.90 +# CONFIG_CPU_SUP_INTEL is not set 88.91 +# CONFIG_CPU_SUP_CYRIX is not set 88.92 +# CONFIG_CPU_SUP_NSC is not set 88.93 +# CONFIG_CPU_SUP_AMD is not set 88.94 +# CONFIG_CPU_SUP_CENTAUR is not set 88.95 +# CONFIG_CPU_SUP_TRANSMETA is not set 88.96 +# CONFIG_CPU_SUP_RISE is not set 88.97 +# CONFIG_CPU_SUP_NEXGEN is not set 88.98 +# CONFIG_CPU_SUP_UMC is not set 88.99 +CONFIG_CRC32_CALC=y 88.100 +CONFIG_TINY_SHMEM=y 88.101 +CONFIG_BASE_SMALL=0 88.102 +CONFIG_SLOB=y 88.103 + 88.104 +# 88.105 +# Loadable module support 88.106 +# 88.107 +CONFIG_MODULES=y 88.108 +# CONFIG_MODULE_UNLOAD is not set 88.109 +CONFIG_OBSOLETE_MODPARM=y 88.110 +# CONFIG_MODVERSIONS is not set 88.111 +# CONFIG_MODULE_SRCVERSION_ALL is not set 88.112 +# CONFIG_KMOD is not set 88.113 + 88.114 +# 88.115 +# Processor type and features 88.116 +# 88.117 +CONFIG_X86_PC=y 88.118 +# CONFIG_X86_ELAN is not set 88.119 +# CONFIG_X86_VOYAGER is not set 88.120 +# CONFIG_X86_NUMAQ is not set 88.121 +# CONFIG_X86_SUMMIT is not set 88.122 +# CONFIG_X86_BIGSMP is not set 88.123 +# CONFIG_X86_VISWS is not set 88.124 +# CONFIG_X86_GENERICARCH is not set 88.125 +# CONFIG_X86_ES7000 is not set 88.126 +CONFIG_M386=y 88.127 +# CONFIG_M486 is not set 88.128 +# CONFIG_M586 is not set 88.129 +# CONFIG_M586TSC is not set 88.130 +# CONFIG_M586MMX is not set 88.131 +# CONFIG_M686 is not set 88.132 +# CONFIG_MPENTIUMII is not set 88.133 +# CONFIG_MPENTIUMIII is not set 88.134 +# CONFIG_MPENTIUMM is not set 88.135 +# CONFIG_MPENTIUM4 is not set 88.136 +# CONFIG_MK6 is not set 88.137 +# CONFIG_MK7 is not set 88.138 +# CONFIG_MK8 is not set 88.139 +# CONFIG_MCRUSOE is not set 88.140 +# CONFIG_MEFFICEON is not set 88.141 +# CONFIG_MWINCHIPC6 is not set 88.142 +# CONFIG_MWINCHIP2 is not set 88.143 +# CONFIG_MWINCHIP3D is not set 88.144 +# CONFIG_MGEODEGX1 is not set 88.145 +# CONFIG_MCYRIXIII is not set 88.146 +# CONFIG_MVIAC3_2 is not set 88.147 +# CONFIG_X86_GENERIC is not set 88.148 +CONFIG_X86_L1_CACHE_SHIFT=4 88.149 +CONFIG_RWSEM_GENERIC_SPINLOCK=y 88.150 +CONFIG_GENERIC_CALIBRATE_DELAY=y 88.151 +CONFIG_X86_PPRO_FENCE=y 88.152 +CONFIG_X86_F00F_BUG=y 88.153 +# CONFIG_HPET_TIMER is not set 88.154 +# CONFIG_SMP is not set 88.155 +CONFIG_PREEMPT_NONE=y 88.156 +# CONFIG_PREEMPT_VOLUNTARY is not set 88.157 +# CONFIG_PREEMPT is not set 88.158 +# CONFIG_X86_UP_APIC is not set 88.159 +# CONFIG_X86_MCE is not set 88.160 +# CONFIG_TOSHIBA is not set 88.161 +# CONFIG_I8K is not set 88.162 +# CONFIG_X86_REBOOTFIXUPS is not set 88.163 +# CONFIG_MICROCODE is not set 88.164 +# CONFIG_X86_MSR is not set 88.165 +# CONFIG_X86_CPUID is not set 88.166 + 88.167 +# 88.168 +# Firmware Drivers 88.169 +# 88.170 +# CONFIG_EDD is not set 88.171 +# CONFIG_DELL_RBU is not set 88.172 +CONFIG_DCDBAS=m 88.173 +CONFIG_NOHIGHMEM=y 88.174 +# CONFIG_HIGHMEM4G is not set 88.175 +# CONFIG_HIGHMEM64G is not set 88.176 +CONFIG_SELECT_MEMORY_MODEL=y 88.177 +CONFIG_FLATMEM_MANUAL=y 88.178 +# CONFIG_DISCONTIGMEM_MANUAL is not set 88.179 +# CONFIG_SPARSEMEM_MANUAL is not set 88.180 +CONFIG_FLATMEM=y 88.181 +CONFIG_FLAT_NODE_MEM_MAP=y 88.182 +# CONFIG_SPARSEMEM_STATIC is not set 88.183 +CONFIG_MATH_EMULATION=y 88.184 +# CONFIG_MTRR is not set 88.185 +# CONFIG_REGPARM is not set 88.186 +CONFIG_SECCOMP=y 88.187 +CONFIG_HZ_100=y 88.188 +# CONFIG_HZ_250 is not set 88.189 +# CONFIG_HZ_1000 is not set 88.190 +CONFIG_HZ=100 88.191 +CONFIG_PHYSICAL_START=0x100000 88.192 +# CONFIG_KEXEC is not set 88.193 + 88.194 +# 88.195 +# Power management options (ACPI, APM) 88.196 +# 88.197 +# CONFIG_PM is not set 88.198 + 88.199 +# 88.200 +# ACPI (Advanced Configuration and Power Interface) Support 88.201 +# 88.202 +# CONFIG_ACPI is not set 88.203 + 88.204 +# 88.205 +# CPU Frequency scaling 88.206 +# 88.207 +# CONFIG_CPU_FREQ is not set 88.208 + 88.209 +# 88.210 +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) 88.211 +# 88.212 +CONFIG_PCI=y 88.213 +# CONFIG_PCI_GOBIOS is not set 88.214 +# CONFIG_PCI_GOMMCONFIG is not set 88.215 +CONFIG_PCI_GODIRECT=y 88.216 +# CONFIG_PCI_GOANY is not set 88.217 +CONFIG_PCI_DIRECT=y 88.218 +# CONFIG_PCIEPORTBUS is not set 88.219 +# CONFIG_PCI_LEGACY_PROC is not set 88.220 +CONFIG_ISA_DMA_API=y 88.221 +CONFIG_ISA=y 88.222 +# CONFIG_EISA is not set 88.223 +# CONFIG_MCA is not set 88.224 +# CONFIG_SCx200 is not set 88.225 + 88.226 +# 88.227 +# PCCARD (PCMCIA/CardBus) support 88.228 +# 88.229 +# CONFIG_PCCARD is not set 88.230 + 88.231 +# 88.232 +# PCI Hotplug Support 88.233 +# 88.234 +# CONFIG_HOTPLUG_PCI is not set 88.235 + 88.236 +# 88.237 +# Executable file formats 88.238 +# 88.239 +CONFIG_BINFMT_ELF=y 88.240 +# CONFIG_BINFMT_AOUT is not set 88.241 +# CONFIG_BINFMT_MISC is not set 88.242 + 88.243 +# 88.244 +# Networking 88.245 +# 88.246 +CONFIG_NET=y 88.247 + 88.248 +# 88.249 +# Networking options 88.250 +# 88.251 +CONFIG_PACKET=y 88.252 +# CONFIG_PACKET_MMAP is not set 88.253 +# CONFIG_UNIX is not set 88.254 +# CONFIG_NET_KEY is not set 88.255 +CONFIG_INET=y 88.256 +# CONFIG_IP_MULTICAST is not set 88.257 +# CONFIG_IP_ADVANCED_ROUTER is not set 88.258 +CONFIG_IP_FIB_HASH=y 88.259 +# CONFIG_IP_PNP is not set 88.260 +# CONFIG_NET_IPIP is not set 88.261 +# CONFIG_NET_IPGRE is not set 88.262 +# CONFIG_ARPD is not set 88.263 +# CONFIG_SYN_COOKIES is not set 88.264 +# CONFIG_INET_AH is not set 88.265 +# CONFIG_INET_ESP is not set 88.266 +# CONFIG_INET_IPCOMP is not set 88.267 +# CONFIG_INET_TUNNEL is not set 88.268 +CONFIG_INET_DIAG=m 88.269 +CONFIG_INET_TCP_DIAG=m 88.270 +# CONFIG_TCP_CONG_ADVANCED is not set 88.271 +CONFIG_TCP_CONG_BIC=y 88.272 +# CONFIG_IPV6 is not set 88.273 +# CONFIG_NETFILTER is not set 88.274 + 88.275 +# 88.276 +# DCCP Configuration (EXPERIMENTAL) 88.277 +# 88.278 +# CONFIG_IP_DCCP is not set 88.279 + 88.280 +# 88.281 +# SCTP Configuration (EXPERIMENTAL) 88.282 +# 88.283 +# CONFIG_IP_SCTP is not set 88.284 +# CONFIG_ATM is not set 88.285 +# CONFIG_BRIDGE is not set 88.286 +# CONFIG_VLAN_8021Q is not set 88.287 +# CONFIG_DECNET is not set 88.288 +# CONFIG_LLC2 is not set 88.289 +# CONFIG_IPX is not set 88.290 +# CONFIG_ATALK is not set 88.291 +# CONFIG_X25 is not set 88.292 +# CONFIG_LAPB is not set 88.293 +# CONFIG_NET_DIVERT is not set 88.294 +# CONFIG_ECONET is not set 88.295 +# CONFIG_WAN_ROUTER is not set 88.296 +# CONFIG_NET_SCHED is not set 88.297 +# CONFIG_NET_CLS_ROUTE is not set 88.298 + 88.299 +# 88.300 +# Network testing 88.301 +# 88.302 +# CONFIG_NET_PKTGEN is not set 88.303 +# CONFIG_HAMRADIO is not set 88.304 +# CONFIG_IRDA is not set 88.305 +# CONFIG_BT is not set 88.306 +# CONFIG_IEEE80211 is not set 88.307 + 88.308 +# 88.309 +# Device Drivers 88.310 +# 88.311 + 88.312 +# 88.313 +# Generic Driver Options 88.314 +# 88.315 +# CONFIG_STANDALONE is not set 88.316 +CONFIG_PREVENT_FIRMWARE_BUILD=y 88.317 +# CONFIG_FW_LOADER is not set 88.318 + 88.319 +# 88.320 +# Connector - unified userspace <-> kernelspace linker 88.321 +# 88.322 +# CONFIG_CONNECTOR is not set 88.323 + 88.324 +# 88.325 +# Memory Technology Devices (MTD) 88.326 +# 88.327 +# CONFIG_MTD is not set 88.328 + 88.329 +# 88.330 +# Parallel port support 88.331 +# 88.332 +# CONFIG_PARPORT is not set 88.333 + 88.334 +# 88.335 +# Plug and Play support 88.336 +# 88.337 +# CONFIG_PNP is not set 88.338 + 88.339 +# 88.340 +# Block devices 88.341 +# 88.342 +# CONFIG_BLK_DEV_FD is not set 88.343 +# CONFIG_BLK_DEV_XD is not set 88.344 +# CONFIG_BLK_CPQ_DA is not set 88.345 +# CONFIG_BLK_CPQ_CISS_DA is not set 88.346 +# CONFIG_BLK_DEV_DAC960 is not set 88.347 +# CONFIG_BLK_DEV_UMEM is not set 88.348 +# CONFIG_BLK_DEV_COW_COMMON is not set 88.349 +# CONFIG_BLK_DEV_LOOP is not set 88.350 +# CONFIG_BLK_DEV_NBD is not set 88.351 +# CONFIG_BLK_DEV_SX8 is not set 88.352 +# CONFIG_BLK_DEV_UB is not set 88.353 +CONFIG_BLK_DEV_RAM=y 88.354 +CONFIG_BLK_DEV_RAM_COUNT=4 88.355 +CONFIG_BLK_DEV_RAM_SIZE=4096 88.356 +CONFIG_BLK_DEV_INITRD=y 88.357 +# CONFIG_LBD is not set 88.358 +# CONFIG_CDROM_PKTCDVD is not set 88.359 + 88.360 +# 88.361 +# IO Schedulers 88.362 +# 88.363 +CONFIG_IOSCHED_NOOP=y 88.364 +# CONFIG_IOSCHED_AS is not set 88.365 +# CONFIG_IOSCHED_DEADLINE is not set 88.366 +CONFIG_IOSCHED_CFQ=m 88.367 +# CONFIG_ATA_OVER_ETH is not set 88.368 + 88.369 +# 88.370 +# ATA/ATAPI/MFM/RLL support 88.371 +# 88.372 +CONFIG_IDE=y 88.373 +# CONFIG_BLK_DEV_IDE is not set 88.374 +CONFIG_BLK_DEV_HD_ONLY=y 88.375 +CONFIG_BLK_DEV_HD=y 88.376 + 88.377 +# 88.378 +# SCSI device support 88.379 +# 88.380 +# CONFIG_RAID_ATTRS is not set 88.381 +CONFIG_SCSI=m 88.382 +CONFIG_SCSI_PROC_FS=y 88.383 + 88.384 +# 88.385 +# SCSI support type (disk, tape, CD-ROM) 88.386 +# 88.387 +# CONFIG_BLK_DEV_SD is not set 88.388 +# CONFIG_CHR_DEV_ST is not set 88.389 +# CONFIG_CHR_DEV_OSST is not set 88.390 +# CONFIG_BLK_DEV_SR is not set 88.391 +# CONFIG_CHR_DEV_SG is not set 88.392 +# CONFIG_CHR_DEV_SCH is not set 88.393 + 88.394 +# 88.395 +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs 88.396 +# 88.397 +# CONFIG_SCSI_MULTI_LUN is not set 88.398 +# CONFIG_SCSI_CONSTANTS is not set 88.399 +# CONFIG_SCSI_LOGGING is not set 88.400 + 88.401 +# 88.402 +# SCSI Transport Attributes 88.403 +# 88.404 +# CONFIG_SCSI_SPI_ATTRS is not set 88.405 +# CONFIG_SCSI_FC_ATTRS is not set 88.406 +# CONFIG_SCSI_ISCSI_ATTRS is not set 88.407 +# CONFIG_SCSI_SAS_ATTRS is not set 88.408 + 88.409 +# 88.410 +# SCSI low-level drivers 88.411 +# 88.412 +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set 88.413 +# CONFIG_SCSI_3W_9XXX is not set 88.414 +# CONFIG_SCSI_7000FASST is not set 88.415 +# CONFIG_SCSI_ACARD is not set 88.416 +# CONFIG_SCSI_AHA152X is not set 88.417 +# CONFIG_SCSI_AHA1542 is not set 88.418 +# CONFIG_SCSI_AACRAID is not set 88.419 +# CONFIG_SCSI_AIC7XXX is not set 88.420 +# CONFIG_SCSI_AIC7XXX_OLD is not set 88.421 +# CONFIG_SCSI_AIC79XX is not set 88.422 +# CONFIG_SCSI_DPT_I2O is not set 88.423 +# CONFIG_SCSI_IN2000 is not set 88.424 +# CONFIG_MEGARAID_NEWGEN is not set 88.425 +# CONFIG_MEGARAID_LEGACY is not set 88.426 +# CONFIG_MEGARAID_SAS is not set 88.427 +# CONFIG_SCSI_SATA is not set 88.428 +# CONFIG_SCSI_BUSLOGIC is not set 88.429 +# CONFIG_SCSI_DMX3191D is not set 88.430 +# CONFIG_SCSI_DTC3280 is not set 88.431 +# CONFIG_SCSI_EATA is not set 88.432 +# CONFIG_SCSI_FUTURE_DOMAIN is not set 88.433 +# CONFIG_SCSI_GDTH is not set 88.434 +# CONFIG_SCSI_GENERIC_NCR5380 is not set 88.435 +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set 88.436 +# CONFIG_SCSI_IPS is not set 88.437 +# CONFIG_SCSI_INITIO is not set 88.438 +# CONFIG_SCSI_INIA100 is not set 88.439 +# CONFIG_SCSI_NCR53C406A is not set 88.440 +# CONFIG_SCSI_SYM53C8XX_2 is not set 88.441 +# CONFIG_SCSI_IPR is not set 88.442 +# CONFIG_SCSI_PAS16 is not set 88.443 +# CONFIG_SCSI_PSI240I is not set 88.444 +# CONFIG_SCSI_QLOGIC_FAS is not set 88.445 +# CONFIG_SCSI_QLOGIC_FC is not set 88.446 +# CONFIG_SCSI_QLOGIC_1280 is not set 88.447 +CONFIG_SCSI_QLA2XXX=m 88.448 +# CONFIG_SCSI_QLA21XX is not set 88.449 +# CONFIG_SCSI_QLA22XX is not set 88.450 +# CONFIG_SCSI_QLA2300 is not set 88.451 +# CONFIG_SCSI_QLA2322 is not set 88.452 +# CONFIG_SCSI_QLA6312 is not set 88.453 +# CONFIG_SCSI_QLA24XX is not set 88.454 +# CONFIG_SCSI_LPFC is not set 88.455 +# CONFIG_SCSI_SYM53C416 is not set 88.456 +# CONFIG_SCSI_DC395x is not set 88.457 +# CONFIG_SCSI_DC390T is not set 88.458 +# CONFIG_SCSI_T128 is not set 88.459 +# CONFIG_SCSI_U14_34F is not set 88.460 +# CONFIG_SCSI_ULTRASTOR is not set 88.461 +# CONFIG_SCSI_NSP32 is not set 88.462 +# CONFIG_SCSI_DEBUG is not set 88.463 + 88.464 +# 88.465 +# Old CD-ROM drivers (not SCSI, not IDE) 88.466 +# 88.467 +# CONFIG_CD_NO_IDESCSI is not set 88.468 + 88.469 +# 88.470 +# Multi-device support (RAID and LVM) 88.471 +# 88.472 +# CONFIG_MD is not set 88.473 + 88.474 +# 88.475 +# Fusion MPT device support 88.476 +# 88.477 +# CONFIG_FUSION is not set 88.478 +# CONFIG_FUSION_SPI is not set 88.479 +# CONFIG_FUSION_FC is not set 88.480 +# CONFIG_FUSION_SAS is not set 88.481 + 88.482 +# 88.483 +# IEEE 1394 (FireWire) support 88.484 +# 88.485 +# CONFIG_IEEE1394 is not set 88.486 + 88.487 +# 88.488 +# I2O device support 88.489 +# 88.490 +# CONFIG_I2O is not set 88.491 + 88.492 +# 88.493 +# Network device support 88.494 +# 88.495 +CONFIG_NETDEVICES=y 88.496 +# CONFIG_DUMMY is not set 88.497 +# CONFIG_BONDING is not set 88.498 +# CONFIG_EQUALIZER is not set 88.499 +# CONFIG_TUN is not set 88.500 + 88.501 +# 88.502 +# ARCnet devices 88.503 +# 88.504 +# CONFIG_ARCNET is not set 88.505 + 88.506 +# 88.507 +# PHY device support 88.508 +# 88.509 +# CONFIG_PHYLIB is not set 88.510 + 88.511 +# 88.512 +# Ethernet (10 or 100Mbit) 88.513 +# 88.514 +CONFIG_NET_ETHERNET=y 88.515 +# CONFIG_MII is not set 88.516 +# CONFIG_HAPPYMEAL is not set 88.517 +# CONFIG_SUNGEM is not set 88.518 +# CONFIG_CASSINI is not set 88.519 +CONFIG_NET_VENDOR_3COM=y 88.520 +# CONFIG_EL1 is not set 88.521 +# CONFIG_EL2 is not set 88.522 +# CONFIG_ELPLUS is not set 88.523 +# CONFIG_EL16 is not set 88.524 +CONFIG_EL3=m 88.525 +# CONFIG_3C515 is not set 88.526 +# CONFIG_VORTEX is not set 88.527 +# CONFIG_TYPHOON is not set 88.528 +# CONFIG_LANCE is not set 88.529 +# CONFIG_NET_VENDOR_SMC is not set 88.530 +# CONFIG_NET_VENDOR_RACAL is not set 88.531 + 88.532 +# 88.533 +# Tulip family network device support 88.534 +# 88.535 +# CONFIG_NET_TULIP is not set 88.536 +# CONFIG_AT1700 is not set 88.537 +# CONFIG_DEPCA is not set 88.538 +# CONFIG_HP100 is not set 88.539 +CONFIG_NET_ISA=y 88.540 +# CONFIG_E2100 is not set 88.541 +# CONFIG_EWRK3 is not set 88.542 +# CONFIG_EEXPRESS is not set 88.543 +# CONFIG_EEXPRESS_PRO is not set 88.544 +# CONFIG_HPLAN_PLUS is not set 88.545 +# CONFIG_HPLAN is not set 88.546 +# CONFIG_LP486E is not set 88.547 +# CONFIG_ETH16I is not set 88.548 +CONFIG_NE2000=m 88.549 +# CONFIG_ZNET is not set 88.550 +# CONFIG_SEEQ8005 is not set 88.551 +CONFIG_NET_PCI=y 88.552 +# CONFIG_PCNET32 is not set 88.553 +# CONFIG_AMD8111_ETH is not set 88.554 +# CONFIG_ADAPTEC_STARFIRE is not set 88.555 +# CONFIG_AC3200 is not set 88.556 +# CONFIG_APRICOT is not set 88.557 +# CONFIG_B44 is not set 88.558 +# CONFIG_FORCEDETH is not set 88.559 +CONFIG_CS89x0=m 88.560 +# CONFIG_DGRS is not set 88.561 +# CONFIG_EEPRO100 is not set 88.562 +# CONFIG_E100 is not set 88.563 +# CONFIG_FEALNX is not set 88.564 +# CONFIG_NATSEMI is not set 88.565 +# CONFIG_NE2K_PCI is not set 88.566 +# CONFIG_8139CP is not set 88.567 +# CONFIG_8139TOO is not set 88.568 +# CONFIG_SIS900 is not set 88.569 +# CONFIG_EPIC100 is not set 88.570 +# CONFIG_SUNDANCE is not set 88.571 +# CONFIG_TLAN is not set 88.572 +# CONFIG_VIA_RHINE is not set 88.573 + 88.574 +# 88.575 +# Ethernet (1000 Mbit) 88.576 +# 88.577 +# CONFIG_ACENIC is not set 88.578 +# CONFIG_DL2K is not set 88.579 +# CONFIG_E1000 is not set 88.580 +# CONFIG_NS83820 is not set 88.581 +# CONFIG_HAMACHI is not set 88.582 +# CONFIG_YELLOWFIN is not set 88.583 +# CONFIG_R8169 is not set 88.584 +# CONFIG_SIS190 is not set 88.585 +# CONFIG_SKGE is not set 88.586 +# CONFIG_SK98LIN is not set 88.587 +# CONFIG_VIA_VELOCITY is not set 88.588 +# CONFIG_TIGON3 is not set 88.589 +# CONFIG_BNX2 is not set 88.590 + 88.591 +# 88.592 +# Ethernet (10000 Mbit) 88.593 +# 88.594 +# CONFIG_CHELSIO_T1 is not set 88.595 +# CONFIG_IXGB is not set 88.596 +# CONFIG_S2IO is not set 88.597 + 88.598 +# 88.599 +# Token Ring devices 88.600 +# 88.601 +# CONFIG_TR is not set 88.602 + 88.603 +# 88.604 +# Wireless LAN (non-hamradio) 88.605 +# 88.606 +# CONFIG_NET_RADIO is not set 88.607 + 88.608 +# 88.609 +# Wan interfaces 88.610 +# 88.611 +# CONFIG_WAN is not set 88.612 +# CONFIG_FDDI is not set 88.613 +# CONFIG_HIPPI is not set 88.614 +CONFIG_PPP=m 88.615 +# CONFIG_PPP_MULTILINK is not set 88.616 +# CONFIG_PPP_FILTER is not set 88.617 +CONFIG_PPP_ASYNC=m 88.618 +CONFIG_PPP_SYNC_TTY=m 88.619 +CONFIG_PPP_DEFLATE=m 88.620 +CONFIG_PPP_BSDCOMP=m 88.621 +CONFIG_PPPOE=m 88.622 +# CONFIG_SLIP is not set 88.623 +# CONFIG_NET_FC is not set 88.624 +# CONFIG_SHAPER is not set 88.625 +# CONFIG_NETCONSOLE is not set 88.626 +# CONFIG_KGDBOE is not set 88.627 +# CONFIG_NETPOLL is not set 88.628 +# CONFIG_NETPOLL_RX is not set 88.629 +# CONFIG_NETPOLL_TRAP is not set 88.630 +# CONFIG_NET_POLL_CONTROLLER is not set 88.631 + 88.632 +# 88.633 +# ISDN subsystem 88.634 +# 88.635 +# CONFIG_ISDN is not set 88.636 + 88.637 +# 88.638 +# Telephony Support 88.639 +# 88.640 +# CONFIG_PHONE is not set 88.641 + 88.642 +# 88.643 +# Input device support 88.644 +# 88.645 +CONFIG_INPUT=y 88.646 + 88.647 +# 88.648 +# Userland interfaces 88.649 +# 88.650 +# CONFIG_INPUT_MOUSEDEV is not set 88.651 +# CONFIG_INPUT_JOYDEV is not set 88.652 +# CONFIG_INPUT_TSDEV is not set 88.653 +# CONFIG_INPUT_EVDEV is not set 88.654 +# CONFIG_INPUT_EVBUG is not set 88.655 + 88.656 +# 88.657 +# Input Device Drivers 88.658 +# 88.659 +CONFIG_INPUT_KEYBOARD=y 88.660 +CONFIG_KEYBOARD_ATKBD=y 88.661 +# CONFIG_KEYBOARD_SUNKBD is not set 88.662 +# CONFIG_KEYBOARD_LKKBD is not set 88.663 +# CONFIG_KEYBOARD_XTKBD is not set 88.664 +# CONFIG_KEYBOARD_NEWTON is not set 88.665 +# CONFIG_INPUT_MOUSE is not set 88.666 +# CONFIG_INPUT_JOYSTICK is not set 88.667 +# CONFIG_INPUT_TOUCHSCREEN is not set 88.668 +# CONFIG_INPUT_MISC is not set 88.669 + 88.670 +# 88.671 +# Hardware I/O ports 88.672 +# 88.673 +CONFIG_SERIO=y 88.674 +CONFIG_SERIO_I8042=y 88.675 +# CONFIG_SERIO_SERPORT is not set 88.676 +# CONFIG_SERIO_CT82C710 is not set 88.677 +# CONFIG_SERIO_PCIPS2 is not set 88.678 +CONFIG_SERIO_LIBPS2=y 88.679 +# CONFIG_SERIO_RAW is not set 88.680 +# CONFIG_GAMEPORT is not set 88.681 + 88.682 +# 88.683 +# Character devices 88.684 +# 88.685 +CONFIG_VT=y 88.686 +CONFIG_VT_CONSOLE=y 88.687 +CONFIG_HW_CONSOLE=y 88.688 +# CONFIG_SERIAL_NONSTANDARD is not set 88.689 + 88.690 +# 88.691 +# Serial drivers 88.692 +# 88.693 +CONFIG_SERIAL_8250=m 88.694 +CONFIG_SERIAL_8250_NR_UARTS=4 88.695 +# CONFIG_SERIAL_8250_EXTENDED is not set 88.696 + 88.697 +# 88.698 +# Non-8250 serial port support 88.699 +# 88.700 +CONFIG_SERIAL_CORE=m 88.701 +# CONFIG_SERIAL_JSM is not set 88.702 +CONFIG_UNIX98_PTYS=y 88.703 +# CONFIG_LEGACY_PTYS is not set 88.704 + 88.705 +# 88.706 +# IPMI 88.707 +# 88.708 +# CONFIG_IPMI_HANDLER is not set 88.709 + 88.710 +# 88.711 +# Watchdog Cards 88.712 +# 88.713 +# CONFIG_WATCHDOG is not set 88.714 +# CONFIG_HW_RANDOM is not set 88.715 +# CONFIG_NVRAM is not set 88.716 +# CONFIG_RTC is not set 88.717 +# CONFIG_GEN_RTC is not set 88.718 +# CONFIG_DTLK is not set 88.719 +# CONFIG_R3964 is not set 88.720 +# CONFIG_APPLICOM is not set 88.721 +# CONFIG_SONYPI is not set 88.722 + 88.723 +# 88.724 +# Ftape, the floppy tape device driver 88.725 +# 88.726 +# CONFIG_FTAPE is not set 88.727 +CONFIG_AGP=m 88.728 +CONFIG_AGP_ALI=m 88.729 +CONFIG_AGP_ATI=m 88.730 +# CONFIG_AGP_AMD is not set 88.731 +# CONFIG_AGP_AMD64 is not set 88.732 +CONFIG_AGP_INTEL=m 88.733 +CONFIG_AGP_NVIDIA=m 88.734 +CONFIG_AGP_SIS=m 88.735 +# CONFIG_AGP_SWORKS is not set 88.736 +CONFIG_AGP_VIA=m 88.737 +# CONFIG_AGP_EFFICEON is not set 88.738 +# CONFIG_DRM is not set 88.739 +# CONFIG_MWAVE is not set 88.740 +# CONFIG_RAW_DRIVER is not set 88.741 +# CONFIG_HANGCHECK_TIMER is not set 88.742 + 88.743 +# 88.744 +# TPM devices 88.745 +# 88.746 +# CONFIG_TCG_TPM is not set 88.747 + 88.748 +# 88.749 +# I2C support 88.750 +# 88.751 +CONFIG_I2C=m 88.752 +# CONFIG_I2C_CHARDEV is not set 88.753 + 88.754 +# 88.755 +# I2C Algorithms 88.756 +# 88.757 +CONFIG_I2C_ALGOBIT=m 88.758 +# CONFIG_I2C_ALGOPCF is not set 88.759 +# CONFIG_I2C_ALGOPCA is not set 88.760 + 88.761 +# 88.762 +# I2C Hardware Bus support 88.763 +# 88.764 +# CONFIG_I2C_ALI1535 is not set 88.765 +# CONFIG_I2C_ALI1563 is not set 88.766 +# CONFIG_I2C_ALI15X3 is not set 88.767 +# CONFIG_I2C_AMD756 is not set 88.768 +# CONFIG_I2C_AMD8111 is not set 88.769 +# CONFIG_I2C_ELEKTOR is not set 88.770 +# CONFIG_I2C_I801 is not set 88.771 +# CONFIG_I2C_I810 is not set 88.772 +# CONFIG_I2C_PIIX4 is not set 88.773 +# CONFIG_I2C_NFORCE2 is not set 88.774 +# CONFIG_I2C_PARPORT_LIGHT is not set 88.775 +# CONFIG_I2C_PROSAVAGE is not set 88.776 +# CONFIG_I2C_SAVAGE4 is not set 88.777 +# CONFIG_SCx200_ACB is not set 88.778 +# CONFIG_I2C_SIS5595 is not set 88.779 +# CONFIG_I2C_SIS630 is not set 88.780 +# CONFIG_I2C_SIS96X is not set 88.781 +# CONFIG_I2C_STUB is not set 88.782 +# CONFIG_I2C_VIA is not set 88.783 +# CONFIG_I2C_VIAPRO is not set 88.784 +# CONFIG_I2C_VOODOO3 is not set 88.785 +# CONFIG_I2C_PCA_ISA is not set 88.786 + 88.787 +# 88.788 +# Miscellaneous I2C Chip support 88.789 +# 88.790 +# CONFIG_SENSORS_DS1337 is not set 88.791 +# CONFIG_SENSORS_DS1374 is not set 88.792 +# CONFIG_SENSORS_EEPROM is not set 88.793 +# CONFIG_SENSORS_PCF8574 is not set 88.794 +# CONFIG_SENSORS_PCA9539 is not set 88.795 +# CONFIG_SENSORS_PCF8591 is not set 88.796 +# CONFIG_SENSORS_RTC8564 is not set 88.797 +# CONFIG_SENSORS_MAX6875 is not set 88.798 +# CONFIG_I2C_DEBUG_CORE is not set 88.799 +# CONFIG_I2C_DEBUG_ALGO is not set 88.800 +# CONFIG_I2C_DEBUG_BUS is not set 88.801 +# CONFIG_I2C_DEBUG_CHIP is not set 88.802 + 88.803 +# 88.804 +# Dallas's 1-wire bus 88.805 +# 88.806 +# CONFIG_W1 is not set 88.807 + 88.808 +# 88.809 +# Hardware Monitoring support 88.810 +# 88.811 +# CONFIG_HWMON is not set 88.812 +# CONFIG_HWMON_VID is not set 88.813 + 88.814 +# 88.815 +# Misc devices 88.816 +# 88.817 +# CONFIG_IBM_ASM is not set 88.818 + 88.819 +# 88.820 +# Multimedia Capabilities Port drivers 88.821 +# 88.822 + 88.823 +# 88.824 +# Multimedia devices 88.825 +# 88.826 +# CONFIG_VIDEO_DEV is not set 88.827 + 88.828 +# 88.829 +# Digital Video Broadcasting Devices 88.830 +# 88.831 +# CONFIG_DVB is not set 88.832 + 88.833 +# 88.834 +# Graphics support 88.835 +# 88.836 +CONFIG_FB=y 88.837 +CONFIG_FB_CFB_FILLRECT=y 88.838 +CONFIG_FB_CFB_COPYAREA=y 88.839 +CONFIG_FB_CFB_IMAGEBLIT=y 88.840 +CONFIG_FB_SOFT_CURSOR=y 88.841 +# CONFIG_FB_MACMODES is not set 88.842 +CONFIG_FB_MODE_HELPERS=y 88.843 +CONFIG_FB_TILEBLITTING=y 88.844 +CONFIG_FB_CIRRUS=m 88.845 +CONFIG_FB_PM2=m 88.846 +# CONFIG_FB_PM2_FIFO_DISCONNECT is not set 88.847 +CONFIG_FB_CYBER2000=m 88.848 +CONFIG_FB_ARC=m 88.849 +# CONFIG_FB_ASILIANT is not set 88.850 +# CONFIG_FB_IMSTT is not set 88.851 +CONFIG_FB_VGA16=m 88.852 +CONFIG_FB_VESA=y 88.853 +# CONFIG_VIDEO_SELECT is not set 88.854 +CONFIG_FB_HGA=m 88.855 +# CONFIG_FB_HGA_ACCEL is not set 88.856 +CONFIG_FB_NVIDIA=m 88.857 +# CONFIG_FB_NVIDIA_I2C is not set 88.858 +CONFIG_FB_RIVA=m 88.859 +# CONFIG_FB_RIVA_I2C is not set 88.860 +# CONFIG_FB_RIVA_DEBUG is not set 88.861 +# CONFIG_FB_I810 is not set 88.862 +CONFIG_FB_INTEL=m 88.863 +# CONFIG_FB_INTEL_DEBUG is not set 88.864 +CONFIG_FB_MATROX=m 88.865 +# CONFIG_FB_MATROX_MILLENIUM is not set 88.866 +# CONFIG_FB_MATROX_MYSTIQUE is not set 88.867 +# CONFIG_FB_MATROX_G is not set 88.868 +# CONFIG_FB_MATROX_I2C is not set 88.869 +# CONFIG_FB_MATROX_MULTIHEAD is not set 88.870 +# CONFIG_FB_RADEON_OLD is not set 88.871 +CONFIG_FB_RADEON=m 88.872 +CONFIG_FB_RADEON_I2C=y 88.873 +# CONFIG_FB_RADEON_DEBUG is not set 88.874 +CONFIG_FB_ATY128=m 88.875 +CONFIG_FB_ATY=m 88.876 +# CONFIG_FB_ATY_CT is not set 88.877 +# CONFIG_FB_ATY_GX is not set 88.878 +CONFIG_FB_SAVAGE=m 88.879 +# CONFIG_FB_SAVAGE_I2C is not set 88.880 +# CONFIG_FB_SAVAGE_ACCEL is not set 88.881 +CONFIG_FB_SIS=m 88.882 +# CONFIG_FB_SIS_300 is not set 88.883 +# CONFIG_FB_SIS_315 is not set 88.884 +CONFIG_FB_NEOMAGIC=m 88.885 +CONFIG_FB_KYRO=m 88.886 +CONFIG_FB_3DFX=m 88.887 +# CONFIG_FB_3DFX_ACCEL is not set 88.888 +CONFIG_FB_VOODOO1=m 88.889 +# CONFIG_FB_CYBLA is not set 88.890 +CONFIG_FB_TRIDENT=m 88.891 +# CONFIG_FB_TRIDENT_ACCEL is not set 88.892 +# CONFIG_FB_GEODE is not set 88.893 +# CONFIG_FB_S1D13XXX is not set 88.894 +CONFIG_FB_VIRTUAL=m 88.895 + 88.896 +# 88.897 +# Console display driver support 88.898 +# 88.899 +CONFIG_VGA_CONSOLE=y 88.900 +# CONFIG_MDA_CONSOLE is not set 88.901 +CONFIG_DUMMY_CONSOLE=y 88.902 +CONFIG_FRAMEBUFFER_CONSOLE=m 88.903 +# CONFIG_FONTS is not set 88.904 +CONFIG_FONT_8x8=y 88.905 +CONFIG_FONT_8x16=y 88.906 + 88.907 +# 88.908 +# Logo configuration 88.909 +# 88.910 +# CONFIG_LOGO is not set 88.911 +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set 88.912 + 88.913 +# 88.914 +# Sound 88.915 +# 88.916 +# CONFIG_SOUND is not set 88.917 + 88.918 +# 88.919 +# USB support 88.920 +# 88.921 +CONFIG_USB_ARCH_HAS_HCD=y 88.922 +CONFIG_USB_ARCH_HAS_OHCI=y 88.923 +CONFIG_USB=m 88.924 +# CONFIG_USB_DEBUG is not set 88.925 + 88.926 +# 88.927 +# Miscellaneous USB options 88.928 +# 88.929 +# CONFIG_USB_DEVICEFS is not set 88.930 +# CONFIG_USB_BANDWIDTH is not set 88.931 +# CONFIG_USB_DYNAMIC_MINORS is not set 88.932 +# CONFIG_USB_OTG is not set 88.933 + 88.934 +# 88.935 +# USB Host Controller Drivers 88.936 +# 88.937 +CONFIG_USB_EHCI_HCD=m 88.938 +# CONFIG_USB_EHCI_SPLIT_ISO is not set 88.939 +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set 88.940 +CONFIG_USB_ISP116X_HCD=m 88.941 +CONFIG_USB_OHCI_HCD=m 88.942 +# CONFIG_USB_OHCI_BIG_ENDIAN is not set 88.943 +CONFIG_USB_OHCI_LITTLE_ENDIAN=y 88.944 +CONFIG_USB_UHCI_HCD=m 88.945 +CONFIG_USB_SL811_HCD=m 88.946 + 88.947 +# 88.948 +# USB Device Class drivers 88.949 +# 88.950 +# CONFIG_USB_BLUETOOTH_TTY is not set 88.951 +CONFIG_USB_ACM=m 88.952 +CONFIG_USB_PRINTER=m 88.953 + 88.954 +# 88.955 +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information 88.956 +# 88.957 +CONFIG_USB_STORAGE=m 88.958 +# CONFIG_USB_STORAGE_DEBUG is not set 88.959 +# CONFIG_USB_STORAGE_DATAFAB is not set 88.960 +# CONFIG_USB_STORAGE_FREECOM is not set 88.961 +# CONFIG_USB_STORAGE_DPCM is not set 88.962 +# CONFIG_USB_STORAGE_USBAT is not set 88.963 +# CONFIG_USB_STORAGE_SDDR09 is not set 88.964 +# CONFIG_USB_STORAGE_SDDR55 is not set 88.965 +# CONFIG_USB_STORAGE_JUMPSHOT is not set 88.966 + 88.967 +# 88.968 +# USB Input Devices 88.969 +# 88.970 +# CONFIG_USB_HID is not set 88.971 + 88.972 +# 88.973 +# USB HID Boot Protocol drivers 88.974 +# 88.975 +CONFIG_USB_KBD=m 88.976 +CONFIG_USB_MOUSE=m 88.977 +# CONFIG_USB_AIPTEK is not set 88.978 +# CONFIG_USB_WACOM is not set 88.979 +# CONFIG_USB_ACECAD is not set 88.980 +# CONFIG_USB_KBTAB is not set 88.981 +# CONFIG_USB_POWERMATE is not set 88.982 +# CONFIG_USB_MTOUCH is not set 88.983 +# CONFIG_USB_ITMTOUCH is not set 88.984 +# CONFIG_USB_EGALAX is not set 88.985 +# CONFIG_USB_YEALINK is not set 88.986 +# CONFIG_USB_XPAD is not set 88.987 +# CONFIG_USB_ATI_REMOTE is not set 88.988 +# CONFIG_USB_KEYSPAN_REMOTE is not set 88.989 +# CONFIG_USB_APPLETOUCH is not set 88.990 + 88.991 +# 88.992 +# USB Imaging devices 88.993 +# 88.994 +# CONFIG_USB_MDC800 is not set 88.995 +# CONFIG_USB_MICROTEK is not set 88.996 + 88.997 +# 88.998 +# USB Multimedia devices 88.999 +# 88.1000 +# CONFIG_USB_DABUSB is not set 88.1001 + 88.1002 +# 88.1003 +# Video4Linux support is needed for USB Multimedia device support 88.1004 +# 88.1005 + 88.1006 +# 88.1007 +# USB Network Adapters 88.1008 +# 88.1009 +# CONFIG_USB_CATC is not set 88.1010 +# CONFIG_USB_KAWETH is not set 88.1011 +# CONFIG_USB_PEGASUS is not set 88.1012 +# CONFIG_USB_RTL8150 is not set 88.1013 +# CONFIG_USB_USBNET is not set 88.1014 +CONFIG_USB_MON=y 88.1015 + 88.1016 +# 88.1017 +# USB port drivers 88.1018 +# 88.1019 + 88.1020 +# 88.1021 +# USB Serial Converter support 88.1022 +# 88.1023 +CONFIG_USB_SERIAL=m 88.1024 +# CONFIG_USB_SERIAL_GENERIC is not set 88.1025 +# CONFIG_USB_SERIAL_AIRPRIME is not set 88.1026 +# CONFIG_USB_SERIAL_BELKIN is not set 88.1027 +# CONFIG_USB_SERIAL_WHITEHEAT is not set 88.1028 +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set 88.1029 +# CONFIG_USB_SERIAL_CP2101 is not set 88.1030 +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set 88.1031 +# CONFIG_USB_SERIAL_EMPEG is not set 88.1032 +# CONFIG_USB_SERIAL_FTDI_SIO is not set 88.1033 +# CONFIG_USB_SERIAL_VISOR is not set 88.1034 +# CONFIG_USB_SERIAL_IPAQ is not set 88.1035 +# CONFIG_USB_SERIAL_IR is not set 88.1036 +# CONFIG_USB_SERIAL_EDGEPORT is not set 88.1037 +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set 88.1038 +# CONFIG_USB_SERIAL_GARMIN is not set 88.1039 +# CONFIG_USB_SERIAL_IPW is not set 88.1040 +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set 88.1041 +# CONFIG_USB_SERIAL_KEYSPAN is not set 88.1042 +# CONFIG_USB_SERIAL_KLSI is not set 88.1043 +# CONFIG_USB_SERIAL_KOBIL_SCT is not set 88.1044 +# CONFIG_USB_SERIAL_MCT_U232 is not set 88.1045 +# CONFIG_USB_SERIAL_PL2303 is not set 88.1046 +# CONFIG_USB_SERIAL_HP4X is not set 88.1047 +# CONFIG_USB_SERIAL_SAFE is not set 88.1048 +# CONFIG_USB_SERIAL_TI is not set 88.1049 +# CONFIG_USB_SERIAL_CYBERJACK is not set 88.1050 +# CONFIG_USB_SERIAL_XIRCOM is not set 88.1051 +# CONFIG_USB_SERIAL_OMNINET is not set 88.1052 + 88.1053 +# 88.1054 +# USB Miscellaneous drivers 88.1055 +# 88.1056 +# CONFIG_USB_EMI62 is not set 88.1057 +# CONFIG_USB_EMI26 is not set 88.1058 +# CONFIG_USB_AUERSWALD is not set 88.1059 +# CONFIG_USB_RIO500 is not set 88.1060 +# CONFIG_USB_LEGOTOWER is not set 88.1061 +# CONFIG_USB_LCD is not set 88.1062 +# CONFIG_USB_LED is not set 88.1063 +# CONFIG_USB_CYTHERM is not set 88.1064 +# CONFIG_USB_PHIDGETKIT is not set 88.1065 +# CONFIG_USB_PHIDGETSERVO is not set 88.1066 +# CONFIG_USB_IDMOUSE is not set 88.1067 +# CONFIG_USB_SISUSBVGA is not set 88.1068 +# CONFIG_USB_LD is not set 88.1069 + 88.1070 +# 88.1071 +# USB DSL modem support 88.1072 +# 88.1073 + 88.1074 +# 88.1075 +# USB Gadget Support 88.1076 +# 88.1077 +# CONFIG_USB_GADGET is not set 88.1078 + 88.1079 +# 88.1080 +# MMC/SD Card support 88.1081 +# 88.1082 +# CONFIG_MMC is not set 88.1083 + 88.1084 +# 88.1085 +# InfiniBand support 88.1086 +# 88.1087 +# CONFIG_INFINIBAND is not set 88.1088 + 88.1089 +# 88.1090 +# SN Devices 88.1091 +# 88.1092 + 88.1093 +# 88.1094 +# File systems 88.1095 +# 88.1096 +# CONFIG_EXT2_FS is not set 88.1097 +CONFIG_EXT3_FS=m 88.1098 +# CONFIG_EXT3_FS_XATTR is not set 88.1099 +CONFIG_JBD=m 88.1100 +# CONFIG_JBD_DEBUG is not set 88.1101 +CONFIG_REISERFS_FS=m 88.1102 +# CONFIG_REISERFS_CHECK is not set 88.1103 +# CONFIG_REISERFS_PROC_INFO is not set 88.1104 +# CONFIG_REISERFS_FS_XATTR is not set 88.1105 +# CONFIG_JFS_FS is not set 88.1106 +# CONFIG_FS_POSIX_ACL is not set 88.1107 +CONFIG_XFS_FS=m 88.1108 +CONFIG_XFS_EXPORT=y 88.1109 +# CONFIG_XFS_QUOTA is not set 88.1110 +# CONFIG_XFS_SECURITY is not set 88.1111 +# CONFIG_XFS_POSIX_ACL is not set 88.1112 +# CONFIG_XFS_RT is not set 88.1113 +# CONFIG_MINIX_FS is not set 88.1114 +# CONFIG_ROMFS_FS is not set 88.1115 +# CONFIG_INOTIFY is not set 88.1116 +# CONFIG_QUOTA is not set 88.1117 +# CONFIG_DNOTIFY is not set 88.1118 +# CONFIG_AUTOFS_FS is not set 88.1119 +# CONFIG_AUTOFS4_FS is not set 88.1120 +CONFIG_FUSE_FS=m 88.1121 + 88.1122 +# 88.1123 +# CD-ROM/DVD Filesystems 88.1124 +# 88.1125 +CONFIG_ISO9660_FS=m 88.1126 +# CONFIG_JOLIET is not set 88.1127 +# CONFIG_ZISOFS is not set 88.1128 +# CONFIG_UDF_FS is not set 88.1129 + 88.1130 +# 88.1131 +# DOS/FAT/NT Filesystems 88.1132 +# 88.1133 +CONFIG_FAT_FS=m 88.1134 +CONFIG_MSDOS_FS=m 88.1135 +CONFIG_VFAT_FS=m 88.1136 +CONFIG_FAT_DEFAULT_CODEPAGE=437 88.1137 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" 88.1138 +# CONFIG_NTFS_FS is not set 88.1139 + 88.1140 +# 88.1141 +# Pseudo filesystems 88.1142 +# 88.1143 +CONFIG_PROC_FS=y 88.1144 +# CONFIG_PROC_KCORE is not set 88.1145 +CONFIG_SYSFS=y 88.1146 +# CONFIG_TMPFS is not set 88.1147 +# CONFIG_HUGETLBFS is not set 88.1148 +# CONFIG_HUGETLB_PAGE is not set 88.1149 +CONFIG_RAMFS=y 88.1150 +# CONFIG_RELAYFS_FS is not set 88.1151 + 88.1152 +# 88.1153 +# Miscellaneous filesystems 88.1154 +# 88.1155 +# CONFIG_ADFS_FS is not set 88.1156 +# CONFIG_AFFS_FS is not set 88.1157 +CONFIG_HFS_FS=m 88.1158 +CONFIG_HFSPLUS_FS=m 88.1159 +# CONFIG_BEFS_FS is not set 88.1160 +# CONFIG_BFS_FS is not set 88.1161 +# CONFIG_EFS_FS is not set 88.1162 +# CONFIG_CRAMFS is not set 88.1163 +# CONFIG_VXFS_FS is not set 88.1164 +# CONFIG_HPFS_FS is not set 88.1165 +# CONFIG_QNX4FS_FS is not set 88.1166 +# CONFIG_SYSV_FS is not set 88.1167 +# CONFIG_UFS_FS is not set 88.1168 + 88.1169 +# 88.1170 +# Network File Systems 88.1171 +# 88.1172 +CONFIG_NFSD=m 88.1173 +# CONFIG_NFSD_V3 is not set 88.1174 +CONFIG_NFSD_TCP=y 88.1175 +CONFIG_LOCKD=m 88.1176 +CONFIG_EXPORTFS=m 88.1177 +CONFIG_NFS_COMMON=y 88.1178 +CONFIG_SUNRPC=m 88.1179 +# CONFIG_RPCSEC_GSS_KRB5 is not set 88.1180 +# CONFIG_RPCSEC_GSS_SPKM3 is not set 88.1181 +CONFIG_SMB_FS=m 88.1182 +# CONFIG_SMB_NLS_DEFAULT is not set 88.1183 +CONFIG_CIFS=m 88.1184 +# CONFIG_CIFS_STATS is not set 88.1185 +# CONFIG_CIFS_XATTR is not set 88.1186 +# CONFIG_CIFS_EXPERIMENTAL is not set 88.1187 +# CONFIG_NCP_FS is not set 88.1188 +# CONFIG_CODA_FS is not set 88.1189 +# CONFIG_AFS_FS is not set 88.1190 +# CONFIG_9P_FS is not set 88.1191 + 88.1192 +# 88.1193 +# Partition Types 88.1194 +# 88.1195 +# CONFIG_PARTITION_ADVANCED is not set 88.1196 +CONFIG_MSDOS_PARTITION=y 88.1197 + 88.1198 +# 88.1199 +# Native Language Support 88.1200 +# 88.1201 +CONFIG_NLS=m 88.1202 +CONFIG_NLS_DEFAULT="iso8859-1" 88.1203 +# CONFIG_NLS_CODEPAGE_437 is not set 88.1204 +# CONFIG_NLS_CODEPAGE_737 is not set 88.1205 +# CONFIG_NLS_CODEPAGE_775 is not set 88.1206 +# CONFIG_NLS_CODEPAGE_850 is not set 88.1207 +# CONFIG_NLS_CODEPAGE_852 is not set 88.1208 +# CONFIG_NLS_CODEPAGE_855 is not set 88.1209 +# CONFIG_NLS_CODEPAGE_857 is not set 88.1210 +# CONFIG_NLS_CODEPAGE_860 is not set 88.1211 +# CONFIG_NLS_CODEPAGE_861 is not set 88.1212 +# CONFIG_NLS_CODEPAGE_862 is not set 88.1213 +# CONFIG_NLS_CODEPAGE_863 is not set 88.1214 +# CONFIG_NLS_CODEPAGE_864 is not set 88.1215 +# CONFIG_NLS_CODEPAGE_865 is not set 88.1216 +# CONFIG_NLS_CODEPAGE_866 is not set 88.1217 +# CONFIG_NLS_CODEPAGE_869 is not set 88.1218 +# CONFIG_NLS_CODEPAGE_936 is not set 88.1219 +# CONFIG_NLS_CODEPAGE_950 is not set 88.1220 +# CONFIG_NLS_CODEPAGE_932 is not set 88.1221 +# CONFIG_NLS_CODEPAGE_949 is not set 88.1222 +# CONFIG_NLS_CODEPAGE_874 is not set 88.1223 +# CONFIG_NLS_ISO8859_8 is not set 88.1224 +# CONFIG_NLS_CODEPAGE_1250 is not set 88.1225 +# CONFIG_NLS_CODEPAGE_1251 is not set 88.1226 +# CONFIG_NLS_ASCII is not set 88.1227 +# CONFIG_NLS_ISO8859_1 is not set 88.1228 +# CONFIG_NLS_ISO8859_2 is not set 88.1229 +# CONFIG_NLS_ISO8859_3 is not set 88.1230 +# CONFIG_NLS_ISO8859_4 is not set 88.1231 +# CONFIG_NLS_ISO8859_5 is not set 88.1232 +# CONFIG_NLS_ISO8859_6 is not set 88.1233 +# CONFIG_NLS_ISO8859_7 is not set 88.1234 +# CONFIG_NLS_ISO8859_9 is not set 88.1235 +# CONFIG_NLS_ISO8859_13 is not set 88.1236 +# CONFIG_NLS_ISO8859_14 is not set 88.1237 +# CONFIG_NLS_ISO8859_15 is not set 88.1238 +# CONFIG_NLS_KOI8_R is not set 88.1239 +# CONFIG_NLS_KOI8_U is not set 88.1240 +CONFIG_NLS_UTF8=m 88.1241 + 88.1242 +# 88.1243 +# Profiling support 88.1244 +# 88.1245 +# CONFIG_PROFILING is not set 88.1246 + 88.1247 +# 88.1248 +# Kernel hacking 88.1249 +# 88.1250 +# CONFIG_PRINTK_TIME is not set 88.1251 +# CONFIG_DEBUG_KERNEL is not set 88.1252 +CONFIG_LOG_BUF_SHIFT=14 88.1253 +CONFIG_EARLY_PRINTK=y 88.1254 + 88.1255 +# 88.1256 +# Security options 88.1257 +# 88.1258 +# CONFIG_KEYS is not set 88.1259 +# CONFIG_SECURITY is not set 88.1260 + 88.1261 +# 88.1262 +# Cryptographic options 88.1263 +# 88.1264 +# CONFIG_CRYPTO is not set 88.1265 + 88.1266 +# 88.1267 +# Hardware crypto devices 88.1268 +# 88.1269 + 88.1270 +# 88.1271 +# Library routines 88.1272 +# 88.1273 +CONFIG_CRC_CCITT=m 88.1274 +# CONFIG_CRC16 is not set 88.1275 +CONFIG_CRC32=y 88.1276 +# CONFIG_LIBCRC32C is not set 88.1277 +CONFIG_ZLIB_INFLATE=m 88.1278 +CONFIG_ZLIB_DEFLATE=m 88.1279 +CONFIG_GENERIC_HARDIRQS=y 88.1280 +CONFIG_GENERIC_IRQ_PROBE=y 88.1281 +CONFIG_X86_BIOS_REBOOT=y
89.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 89.2 +++ b/linux/stuff/list_modules.sh Fri Oct 02 21:45:05 2015 +0200 89.3 @@ -0,0 +1,43 @@ 89.4 +#!/bin/sh 89.5 +# list_modules.sh: list Linux kernel modules for SliTaz GNU/Linux. 89.6 +# 2008/06/07 <pascal.bellard@slitaz.org> - GNU General Public License. 89.7 +# 89.8 + 89.9 +find_modules() 89.10 +{ 89.11 +find $_pkg/lib/modules/*-slitaz/kernel/$1 -type f -exec basename {} \; 89.12 +} 89.13 + 89.14 +if [ -z "$1" ] ; then 89.15 + cat 1>&2 <<EOT 89.16 + 89.17 +\033[1musage:\033[0m `basename $0` path/to/kernel-modules-subtrees 89.18 +exemple `basename $0` drivers/net/wireless >list 89.19 + 89.20 +EOT 89.21 + exit 1 89.22 +fi 89.23 + 89.24 +if [ -z "$(ls -d $_pkg/lib/modules/*-slitaz/kernel/$1 2> /dev/null)" ] ; then 89.25 + cat 1>&2 <<EOT 89.26 + 89.27 +Error : $1 does not exist. 89.28 + 89.29 +EOT 89.30 + exit 1 89.31 +fi 89.32 + 89.33 +for tree in $@; do 89.34 + for module in $(find_modules $tree) ; do 89.35 + grep /$module: $_pkg/lib/modules/*-slitaz/modules.dep || 89.36 + find $_pkg/lib/modules/*-slitaz/kernel/$tree -name $module 89.37 + done | awk '{ for (i = 1; i <= NF; i++) print $i; }' 89.38 +done | sort | uniq | sed -e 's,.*slitaz/,,' -e 's,^kernel/,,' -e 's/:$//' | \ 89.39 +while read module; do 89.40 + grep -qs ^$module$ $src/modules.list && continue 89.41 + if [ ! -f $_pkg/lib/modules/*-slitaz/kernel/$module ]; then 89.42 + (cd $_pkg/lib/modules/*-slitaz/kernel; find -name $(basename $module) ) 89.43 + else 89.44 + echo $module 89.45 + fi 89.46 +done
90.1 --- a/lpd-config/receipt Thu Jul 18 13:24:21 2013 +0000 90.2 +++ b/lpd-config/receipt Fri Oct 02 21:45:05 2015 +0200 90.3 @@ -2,7 +2,7 @@ 90.4 90.5 PACKAGE="lpd-config" 90.6 VERSION="1.0" 90.7 -CATEGORY="configuration" 90.8 +CATEGORY="meta" 90.9 SHORT_DESC="Line printer server configuration (without spooling)" 90.10 MAINTAINER="pascal.bellard@slitaz.org" 90.11 LICENSE="BSD"
91.1 --- a/lpd-spooling-config/receipt Thu Jul 18 13:24:21 2013 +0000 91.2 +++ b/lpd-spooling-config/receipt Fri Oct 02 21:45:05 2015 +0200 91.3 @@ -2,7 +2,7 @@ 91.4 91.5 PACKAGE="lpd-spooling-config" 91.6 VERSION="1.0" 91.7 -CATEGORY="configuration" 91.8 +CATEGORY="meta" 91.9 SHORT_DESC="Line printer server configuration" 91.10 MAINTAINER="pascal.bellard@slitaz.org" 91.11 LICENSE="BSD" 91.12 @@ -13,7 +13,7 @@ 91.13 genpkg_rules() 91.14 { 91.15 mkdir -p $fs/var/spool $fs/dev $fs/usr/sbin 91.16 - cp stuff/lpd-helper $fs/usr/sbin 91.17 + cp $stuff/lpd-helper $fs/usr/sbin 91.18 } 91.19 91.20 config_form()
92.1 --- a/manager-fr/receipt Thu Jul 18 13:24:21 2013 +0000 92.2 +++ b/manager-fr/receipt Fri Oct 02 21:45:05 2015 +0200 92.3 @@ -12,5 +12,5 @@ 92.4 # Rules to gen a SliTaz package suitable for Tazpkg. 92.5 genpkg_rules() 92.6 { 92.7 - cp -a stuff/. $fs 92.8 + cp -a $stuff/. $fs 92.9 }
93.1 --- a/manager/receipt Thu Jul 18 13:24:21 2013 +0000 93.2 +++ b/manager/receipt Fri Oct 02 21:45:05 2015 +0200 93.3 @@ -14,7 +14,7 @@ 93.4 # Rules to gen a SliTaz package suitable for Tazpkg. 93.5 genpkg_rules() 93.6 { 93.7 - cp -a stuff/. $fs 93.8 + cp -a $stuff/. $fs 93.9 } 93.10 93.11 post_install()
94.1 --- a/module-3c509/receipt Thu Jul 18 13:24:21 2013 +0000 94.2 +++ b/module-3c509/receipt Fri Oct 02 21:45:05 2015 +0200 94.3 @@ -1,22 +1,22 @@ 94.4 # SliTaz package receipt. 94.5 94.6 PACKAGE="module-3c509" 94.7 -VERSION="2.6.37" 94.8 +VERSION="2.6.14" 94.9 CATEGORY="base-system" 94.10 SHORT_DESC="Kernel module for the 3c509 driver" 94.11 MAINTAINER="pascal.bellard@slitaz.org" 94.12 LICENSE="GPL2" 94.13 WEB_SITE="http://tiny.slitaz.org/" 94.14 -WANTED="kernel-modular" 94.15 +WANTED="linux" 94.16 94.17 # Rules to gen a SliTaz package suitable for Tazpkg. 94.18 genpkg_rules() 94.19 { 94.20 local path 94.21 - path=lib/modules/$VERSION-slitaz/kernel 94.22 + export src=$WOK/$WANTED/source/linux-$VERSION 94.23 + export _pkg=$WOK/$WANTED/install 94.24 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 94.25 mkdir -p $fs/$path 94.26 - export src=$WOK/$WANTED/linux-$VERSION 94.27 - export _pkg=$src/_pkg 94.28 $src/slitaz/list_modules.sh drivers/net/${PACKAGE#*-}* | while read module; do 94.29 dir=$path/$(dirname $module) 94.30 [ -d $fs/$dir ] || mkdir -p $fs/$dir 94.31 @@ -27,5 +27,52 @@ 94.32 # Post install/remove commands for Tazpkg. 94.33 post_install() 94.34 { 94.35 - chroot "$1/" depmod -a $VERSION-slitaz 94.36 + [ "$IRQ3C509" ] && IRQ3C509="|irq=${IRQ3C509// /,}" 94.37 + [ "$XCVR3C509" ] && XCVR3C509="|xcvr=$XCVR3C509" 94.38 + echo "${PACKAGE#*-}$IRQ3C509|debug=${DBG3C509:-0}$XCVR3C509|max_interrupt_work=${MAXE3C509:-10}" >> $1/modules 94.39 } 94.40 + 94.41 +config_form() 94.42 +{ 94.43 + cat <<EOT 94.44 +<h4>3Com Etherlink III (3c509, 3c509B) ISA/PnP Ethernet driver</h4> 94.45 +<table> 94.46 +<tr> 94.47 +<td>IRQ</td> 94.48 +<td><input type="text" name="IRQ3C509" /></td> 94.49 +</tr> 94.50 +<tr> 94.51 +<td>Tranceiver</td> 94.52 +<td><select name="XCVR3C509"> 94.53 + <option value="">default</option> 94.54 + <option value="0"$([ "$XCVR3C509" == "0" ] && echo ' selected="selected"')>internal</option> 94.55 + <option value="1"$([ "$XCVR3C509" == "1" ] && echo ' selected="selected"')>external</option> 94.56 +</select></td> 94.57 +</tr> 94.58 +<tr> 94.59 +<td>Maximum events handled per interrupt</td> 94.60 +<td><select name="MAXE3C509"> 94.61 +EOT 94.62 + for i in $(seq 10 -1 1); do 94.63 + cat <<EOT 94.64 + <option value="$i"$([ "$MAXE3C509" == "$i" ] && echo ' selected="selected"')>$i</option> 94.65 +EOT 94.66 + done 94.67 + cat <<EOT 94.68 +</select></td> 94.69 +</tr> 94.70 +<tr> 94.71 +<td>Debug</td> 94.72 +<td><select name="DBG3C509"> 94.73 +EOT 94.74 + for i in $(seq 0 6); do 94.75 + cat <<EOT 94.76 + <option value="$i"$([ "$DBG3C509" == "$i" ] && echo ' selected="selected"')>$i</option> 94.77 +EOT 94.78 + done 94.79 + cat <<EOT 94.80 +</select></td> 94.81 +</tr> 94.82 +</table> 94.83 +EOT 94.84 +}
95.1 --- a/module-btrfs/receipt Thu Jul 18 13:24:21 2013 +0000 95.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 95.3 @@ -1,35 +0,0 @@ 95.4 -# SliTaz package receipt. 95.5 - 95.6 -PACKAGE="module-btrfs" 95.7 -VERSION="2.6.37" 95.8 -CATEGORY="base-system" 95.9 -SHORT_DESC="Kernel module for the btrfs filesystem" 95.10 -MAINTAINER="pascal.bellard@slitaz.org" 95.11 -LICENSE="GPL2" 95.12 -WEB_SITE="http://tiny.slitaz.org/" 95.13 -WANTED="kernel-modular" 95.14 -CONFIG_FILES="/etc/filesystems" 95.15 - 95.16 -# Rules to gen a SliTaz package suitable for Tazpkg. 95.17 -genpkg_rules() 95.18 -{ 95.19 - local path 95.20 - path=lib/modules/$VERSION-slitaz/kernel 95.21 - mkdir -p $fs/$path $fs/etc 95.22 - export src=$WOK/$WANTED/linux-$VERSION 95.23 - export _pkg=$src/_pkg 95.24 - $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 95.25 - dir=$path/$(dirname $module) 95.26 - [ -d $fs/$dir ] || mkdir -p $fs/$dir 95.27 - cp -a $_pkg/$path/$module $fs/$dir 95.28 - done 95.29 - touch $fs/etc/filesystems 95.30 -} 95.31 - 95.32 -# Post install/remove commands for Tazpkg. 95.33 -post_install() 95.34 -{ 95.35 - grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 95.36 - echo "${PACKAGE#*-}" >> $1/etc/filesystems 95.37 - chroot "$1/" depmod -a $VERSION-slitaz 95.38 -}
96.1 --- a/module-cifs/receipt Thu Jul 18 13:24:21 2013 +0000 96.2 +++ b/module-cifs/receipt Fri Oct 02 21:45:05 2015 +0200 96.3 @@ -1,23 +1,23 @@ 96.4 # SliTaz package receipt. 96.5 96.6 PACKAGE="module-cifs" 96.7 -VERSION="2.6.37" 96.8 +VERSION="2.6.14" 96.9 CATEGORY="base-system" 96.10 SHORT_DESC="Kernel module for the cifs (samba) filesystem" 96.11 MAINTAINER="pascal.bellard@slitaz.org" 96.12 LICENSE="GPL2" 96.13 WEB_SITE="http://tiny.slitaz.org/" 96.14 -WANTED="kernel-modular" 96.15 +WANTED="linux" 96.16 CONFIG_FILES="/etc/filesystems" 96.17 96.18 # Rules to gen a SliTaz package suitable for Tazpkg. 96.19 genpkg_rules() 96.20 { 96.21 local path 96.22 - path=lib/modules/$VERSION-slitaz/kernel 96.23 + export src=$WOK/$WANTED/source/linux-$VERSION 96.24 + export _pkg=$WOK/$WANTED/install 96.25 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 96.26 mkdir -p $fs/$path $fs/etc 96.27 - export src=$WOK/$WANTED/linux-$VERSION 96.28 - export _pkg=$src/_pkg 96.29 $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 96.30 dir=$path/$(dirname $module) 96.31 [ -d $fs/$dir ] || mkdir -p $fs/$dir 96.32 @@ -29,7 +29,13 @@ 96.33 # Post install/remove commands for Tazpkg. 96.34 post_install() 96.35 { 96.36 + echo ${PACKAGE#*-} >> $1/modules 96.37 grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 96.38 echo "${PACKAGE#*-}" >> $1/etc/filesystems 96.39 - chroot "$1/" depmod -a $VERSION-slitaz 96.40 } 96.41 + 96.42 +#cifs.ko: 96.43 +#parm=CIFSMaxBufSize:Network buffer size (not including header). Default: 16384 Range: 8192 to 130048 96.44 +#parm=cifs_min_rcv:Network buffers in pool. Default: 4 Range: 1 to 64 96.45 +#parm=cifs_min_small:Small network buffers in pool. Default: 30 Range: 2 to 256 96.46 +#parm=cifs_max_pending:Simultaneous requests to server. Default: 50 Range: 2 to 256
97.1 --- a/module-cs89x0/receipt Thu Jul 18 13:24:21 2013 +0000 97.2 +++ b/module-cs89x0/receipt Fri Oct 02 21:45:05 2015 +0200 97.3 @@ -1,22 +1,22 @@ 97.4 # SliTaz package receipt. 97.5 97.6 PACKAGE="module-cs89x0" 97.7 -VERSION="2.6.37" 97.8 +VERSION="2.6.14" 97.9 CATEGORY="base-system" 97.10 SHORT_DESC="Kernel module for the cs89x0 driver" 97.11 MAINTAINER="pascal.bellard@slitaz.org" 97.12 LICENSE="GPL2" 97.13 WEB_SITE="http://tiny.slitaz.org/" 97.14 -WANTED="kernel-modular" 97.15 +WANTED="linux" 97.16 97.17 # Rules to gen a SliTaz package suitable for Tazpkg. 97.18 genpkg_rules() 97.19 { 97.20 local path 97.21 - path=lib/modules/$VERSION-slitaz/kernel 97.22 + export src=$WOK/$WANTED/source/linux-$VERSION 97.23 + export _pkg=$WOK/$WANTED/install 97.24 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 97.25 mkdir -p $fs/$path 97.26 - export src=$WOK/$WANTED/linux-$VERSION 97.27 - export _pkg=$src/_pkg 97.28 $src/slitaz/list_modules.sh drivers/net/${PACKAGE#*-}* | while read module; do 97.29 dir=$path/$(dirname $module) 97.30 [ -d $fs/$dir ] || mkdir -p $fs/$dir 97.31 @@ -27,5 +27,45 @@ 97.32 # Post install/remove commands for Tazpkg. 97.33 post_install() 97.34 { 97.35 - chroot "$1/" depmod -a $VERSION-slitaz 97.36 + [ "$IRQCS89" ] && IRQCS89="|irq=${IRQCS89%%[, ]*}" 97.37 + [ "$IOCS89" ] && IOCS89="|io=${IOCS89%%[, ]*}" 97.38 + echo "${PACKAGE#*-}$IOCS89$IRQCS89|mode=${MODECS89:-rj45}|debug=${DEBUGCS89:-0}" >> $1/modules 97.39 } 97.40 + 97.41 +config_form() 97.42 +{ 97.43 + cat <<EOT 97.44 +<h4>CS89x0 Ethernet driver</h4> 97.45 +<table> 97.46 +<tr> 97.47 +<td>I/O base</td> 97.48 +<td><input type="text" name="IOCS89" 97.49 +title="Likely 0x300 0x320 0x340 0x360 0x200 0x220 0x240 0x260 0x280 0x2a0 0x2c0 or 0x2e0" /></td> 97.50 +</tr> 97.51 +<tr> 97.52 +<td>IRQ</td> 97.53 +<td><input type="text" name="IRQCS89" title "Likely 10 11 12 or 5" /></td> 97.54 +</tr> 97.55 +<tr> 97.56 +<td>Media</td> 97.57 +<td><select name="MODECS89"> 97.58 + <option value="rj45">rj45</option> 97.59 + <option value="bnc"$([ "$MODECS89" == "bnc" ] && echo ' selected="selected"')>bnc</option> 97.60 + <option value="aui"$([ "$MODECS89" == "aui" ] && echo ' selected="selected"')>aui</option> 97.61 +</select></td> 97.62 +</tr> 97.63 +<tr> 97.64 +<td>Debug</td> 97.65 +<td><select name="DEBUGCS89"> 97.66 +EOT 97.67 + for i in $(seq 0 6); do 97.68 + cat <<EOT 97.69 + <option value="$i"$([ "$DEBUGCS89" == "$i" ] && echo ' selected="selected"')>$i</option> 97.70 +EOT 97.71 + done 97.72 + cat <<EOT 97.73 +</select></td> 97.74 +</tr> 97.75 +</table> 97.76 +EOT 97.77 +}
98.1 --- a/module-ext3/receipt Thu Jul 18 13:24:21 2013 +0000 98.2 +++ b/module-ext3/receipt Fri Oct 02 21:45:05 2015 +0200 98.3 @@ -1,23 +1,23 @@ 98.4 # SliTaz package receipt. 98.5 98.6 PACKAGE="module-ext3" 98.7 -VERSION="2.6.37" 98.8 +VERSION="2.6.14" 98.9 CATEGORY="base-system" 98.10 SHORT_DESC="Kernel module for the ext3 filesystem" 98.11 MAINTAINER="pascal.bellard@slitaz.org" 98.12 LICENSE="GPL2" 98.13 WEB_SITE="http://tiny.slitaz.org/" 98.14 -WANTED="kernel-modular" 98.15 +WANTED="linux" 98.16 CONFIG_FILES="/etc/filesystems" 98.17 98.18 # Rules to gen a SliTaz package suitable for Tazpkg. 98.19 genpkg_rules() 98.20 { 98.21 local path 98.22 - path=lib/modules/$VERSION-slitaz/kernel 98.23 + export src=$WOK/$WANTED/source/linux-$VERSION 98.24 + export _pkg=$WOK/$WANTED/install 98.25 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 98.26 mkdir -p $fs/$path $fs/etc 98.27 - export src=$WOK/$WANTED/linux-$VERSION 98.28 - export _pkg=$src/_pkg 98.29 $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 98.30 dir=$path/$(dirname $module) 98.31 [ -d $fs/$dir ] || mkdir -p $fs/$dir 98.32 @@ -29,7 +29,7 @@ 98.33 # Post install/remove commands for Tazpkg. 98.34 post_install() 98.35 { 98.36 + echo ${PACKAGE#*-} >> $1/modules 98.37 grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 98.38 echo "${PACKAGE#*-}" >> $1/etc/filesystems 98.39 - chroot "$1/" depmod -a $VERSION-slitaz 98.40 }
99.1 --- a/module-ext4/receipt Thu Jul 18 13:24:21 2013 +0000 99.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 99.3 @@ -1,35 +0,0 @@ 99.4 -# SliTaz package receipt. 99.5 - 99.6 -PACKAGE="module-ext4" 99.7 -VERSION="2.6.37" 99.8 -CATEGORY="base-system" 99.9 -SHORT_DESC="Kernel module for the ext4 filesystem" 99.10 -MAINTAINER="pascal.bellard@slitaz.org" 99.11 -LICENSE="GPL2" 99.12 -WEB_SITE="http://tiny.slitaz.org/" 99.13 -WANTED="kernel-modular" 99.14 -CONFIG_FILES="/etc/filesystems" 99.15 - 99.16 -# Rules to gen a SliTaz package suitable for Tazpkg. 99.17 -genpkg_rules() 99.18 -{ 99.19 - local path 99.20 - path=lib/modules/$VERSION-slitaz/kernel 99.21 - mkdir -p $fs/$path $fs/etc 99.22 - export src=$WOK/$WANTED/linux-$VERSION 99.23 - export _pkg=$src/_pkg 99.24 - $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 99.25 - dir=$path/$(dirname $module) 99.26 - [ -d $fs/$dir ] || mkdir -p $fs/$dir 99.27 - cp -a $_pkg/$path/$module $fs/$dir 99.28 - done 99.29 - touch $fs/etc/filesystems 99.30 -} 99.31 - 99.32 -# Post install/remove commands for Tazpkg. 99.33 -post_install() 99.34 -{ 99.35 - grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 99.36 - echo "${PACKAGE#*-}" >> $1/etc/filesystems 99.37 - chroot "$1/" depmod -a $VERSION-slitaz 99.38 -}
100.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 100.2 +++ b/module-fat/receipt Fri Oct 02 21:45:05 2015 +0200 100.3 @@ -0,0 +1,37 @@ 100.4 +# SliTaz package receipt. 100.5 + 100.6 +PACKAGE="module-fat" 100.7 +VERSION="2.6.14" 100.8 +CATEGORY="base-system" 100.9 +SHORT_DESC="Kernel module for the vfat filesystem" 100.10 +MAINTAINER="pascal.bellard@slitaz.org" 100.11 +LICENSE="GPL2" 100.12 +WEB_SITE="http://tiny.slitaz.org/" 100.13 +WANTED="linux" 100.14 +CONFIG_FILES="/etc/filesystems" 100.15 + 100.16 +# Rules to gen a SliTaz package suitable for Tazpkg. 100.17 +genpkg_rules() 100.18 +{ 100.19 + local path 100.20 + export src=$WOK/$WANTED/source/linux-$VERSION 100.21 + export _pkg=$WOK/$WANTED/install 100.22 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 100.23 + mkdir -p $fs/$path $fs/etc 100.24 + $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 100.25 + dir=$path/$(dirname $module) 100.26 + [ -d $fs/$dir ] || mkdir -p $fs/$dir 100.27 + cp -a $_pkg/$path/$module $fs/$dir 100.28 + done 100.29 + touch $fs/etc/filesystems 100.30 +} 100.31 + 100.32 +# Post install/remove commands for Tazpkg. 100.33 +post_install() 100.34 +{ 100.35 + echo ${PACKAGE#*-} >> $1/modules 100.36 + for i in vfat fat msdos ; do 100.37 + grep -qs ^$i$ $1/etc/filesystems || \ 100.38 + echo "$i" >> $1/etc/filesystems 100.39 + done 100.40 +}
101.1 --- a/module-fuse/receipt Thu Jul 18 13:24:21 2013 +0000 101.2 +++ b/module-fuse/receipt Fri Oct 02 21:45:05 2015 +0200 101.3 @@ -1,23 +1,23 @@ 101.4 # SliTaz package receipt. 101.5 101.6 PACKAGE="module-fuse" 101.7 -VERSION="2.6.37" 101.8 +VERSION="2.6.14" 101.9 CATEGORY="base-system" 101.10 SHORT_DESC="Kernel module for the fuse filesystem" 101.11 MAINTAINER="pascal.bellard@slitaz.org" 101.12 LICENSE="GPL2" 101.13 WEB_SITE="http://tiny.slitaz.org/" 101.14 -WANTED="kernel-modular" 101.15 +WANTED="linux" 101.16 CONFIG_FILES="/etc/filesystems" 101.17 101.18 # Rules to gen a SliTaz package suitable for Tazpkg. 101.19 genpkg_rules() 101.20 { 101.21 local path 101.22 - path=lib/modules/$VERSION-slitaz/kernel 101.23 + export src=$WOK/$WANTED/source/linux-$VERSION 101.24 + export _pkg=$WOK/$WANTED/install 101.25 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 101.26 mkdir -p $fs/$path $fs/etc 101.27 - export src=$WOK/$WANTED/linux-$VERSION 101.28 - export _pkg=$src/_pkg 101.29 $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 101.30 dir=$path/$(dirname $module) 101.31 [ -d $fs/$dir ] || mkdir -p $fs/$dir 101.32 @@ -29,7 +29,7 @@ 101.33 # Post install/remove commands for Tazpkg. 101.34 post_install() 101.35 { 101.36 + echo ${PACKAGE#*-} >> $1/modules 101.37 grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 101.38 echo "${PACKAGE#*-}" >> $1/etc/filesystems 101.39 - chroot "$1/" depmod -a $VERSION-slitaz 101.40 }
102.1 --- a/module-hfsplus/receipt Thu Jul 18 13:24:21 2013 +0000 102.2 +++ b/module-hfsplus/receipt Fri Oct 02 21:45:05 2015 +0200 102.3 @@ -1,23 +1,23 @@ 102.4 # SliTaz package receipt. 102.5 102.6 PACKAGE="module-hfsplus" 102.7 -VERSION="2.6.37" 102.8 +VERSION="2.6.14" 102.9 CATEGORY="base-system" 102.10 SHORT_DESC="Kernel module for the hfsplus filesystem" 102.11 MAINTAINER="pascal.bellard@slitaz.org" 102.12 LICENSE="GPL2" 102.13 WEB_SITE="http://tiny.slitaz.org/" 102.14 -WANTED="kernel-modular" 102.15 +WANTED="linux" 102.16 CONFIG_FILES="/etc/filesystems" 102.17 102.18 # Rules to gen a SliTaz package suitable for Tazpkg. 102.19 genpkg_rules() 102.20 { 102.21 local path 102.22 - path=lib/modules/$VERSION-slitaz/kernel 102.23 + export src=$WOK/$WANTED/source/linux-$VERSION 102.24 + export _pkg=$WOK/$WANTED/install 102.25 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 102.26 mkdir -p $fs/$path $fs/etc 102.27 - export src=$WOK/$WANTED/linux-$VERSION 102.28 - export _pkg=$src/_pkg 102.29 $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 102.30 dir=$path/$(dirname $module) 102.31 [ -d $fs/$dir ] || mkdir -p $fs/$dir 102.32 @@ -29,7 +29,7 @@ 102.33 # Post install/remove commands for Tazpkg. 102.34 post_install() 102.35 { 102.36 + echo ${PACKAGE#*-} >> $1/modules 102.37 grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 102.38 echo "${PACKAGE#*-}" >> $1/etc/filesystems 102.39 - chroot "$1/" depmod -a $VERSION-slitaz 102.40 }
103.1 --- a/module-isofs/receipt Thu Jul 18 13:24:21 2013 +0000 103.2 +++ b/module-isofs/receipt Fri Oct 02 21:45:05 2015 +0200 103.3 @@ -1,23 +1,23 @@ 103.4 # SliTaz package receipt. 103.5 103.6 PACKAGE="module-isofs" 103.7 -VERSION="2.6.37" 103.8 +VERSION="2.6.14" 103.9 CATEGORY="base-system" 103.10 SHORT_DESC="Kernel module for the iso9660 filesystem" 103.11 MAINTAINER="pascal.bellard@slitaz.org" 103.12 LICENSE="GPL2" 103.13 WEB_SITE="http://tiny.slitaz.org/" 103.14 -WANTED="kernel-modular" 103.15 +WANTED="linux" 103.16 CONFIG_FILES="/etc/filesystems" 103.17 103.18 # Rules to gen a SliTaz package suitable for Tazpkg. 103.19 genpkg_rules() 103.20 { 103.21 local path 103.22 - path=lib/modules/$VERSION-slitaz/kernel 103.23 + export src=$WOK/$WANTED/source/linux-$VERSION 103.24 + export _pkg=$WOK/$WANTED/install 103.25 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 103.26 mkdir -p $fs/$path $fs/etc 103.27 - export src=$WOK/$WANTED/linux-$VERSION 103.28 - export _pkg=$src/_pkg 103.29 $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 103.30 dir=$path/$(dirname $module) 103.31 [ -d $fs/$dir ] || mkdir -p $fs/$dir 103.32 @@ -29,7 +29,7 @@ 103.33 # Post install/remove commands for Tazpkg. 103.34 post_install() 103.35 { 103.36 + echo ${PACKAGE#*-} >> $1/modules 103.37 grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 103.38 echo "${PACKAGE#*-}" >> $1/etc/filesystems 103.39 - chroot "$1/" depmod -a $VERSION-slitaz 103.40 }
104.1 --- a/module-lguest/receipt Thu Jul 18 13:24:21 2013 +0000 104.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 104.3 @@ -1,31 +0,0 @@ 104.4 -# SliTaz package receipt. 104.5 - 104.6 -PACKAGE="module-lguest" 104.7 -VERSION="2.6.37" 104.8 -CATEGORY="base-system" 104.9 -SHORT_DESC="Kernel module for the lguest driver" 104.10 -MAINTAINER="pascal.bellard@slitaz.org" 104.11 -LICENSE="GPL2" 104.12 -WEB_SITE="http://tiny.slitaz.org/" 104.13 -WANTED="kernel-modular" 104.14 - 104.15 -# Rules to gen a SliTaz package suitable for Tazpkg. 104.16 -genpkg_rules() 104.17 -{ 104.18 - local path 104.19 - path=lib/modules/$VERSION-slitaz/kernel 104.20 - mkdir -p $fs/$path 104.21 - export src=$WOK/$WANTED/linux-$VERSION 104.22 - export _pkg=$src/_pkg 104.23 - $src/slitaz/list_modules.sh drivers/${PACKAGE#*-} | while read module; do 104.24 - dir=$path/$(dirname $module) 104.25 - [ -d $fs/$dir ] || mkdir -p $fs/$dir 104.26 - cp -a $_pkg/$path/$module $fs/$dir 104.27 - done 104.28 -} 104.29 - 104.30 -# Post install/remove commands for Tazpkg. 104.31 -post_install() 104.32 -{ 104.33 - chroot "$1/" depmod -a $VERSION-slitaz 104.34 -}
105.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 105.2 +++ b/module-ne/receipt Fri Oct 02 21:45:05 2015 +0200 105.3 @@ -0,0 +1,54 @@ 105.4 +# SliTaz package receipt. 105.5 + 105.6 +PACKAGE="module-ne" 105.7 +VERSION="2.6.14" 105.8 +CATEGORY="base-system" 105.9 +SHORT_DESC="Kernel module for the ne2000 driver" 105.10 +MAINTAINER="pascal.bellard@slitaz.org" 105.11 +LICENSE="GPL2" 105.12 +WEB_SITE="http://tiny.slitaz.org/" 105.13 +WANTED="linux" 105.14 + 105.15 +# Rules to gen a SliTaz package suitable for Tazpkg. 105.16 +genpkg_rules() 105.17 +{ 105.18 + local path 105.19 + export src=$WOK/$WANTED/source/linux-$VERSION 105.20 + export _pkg=$WOK/$WANTED/install 105.21 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 105.22 + mkdir -p $fs/$path 105.23 + $src/slitaz/list_modules.sh drivers/net/${PACKAGE#*-}* | while read module; do 105.24 + dir=$path/$(dirname $module) 105.25 + [ -d $fs/$dir ] || mkdir -p $fs/$dir 105.26 + cp -a $_pkg/$path/$module $fs/$dir 105.27 + done 105.28 +} 105.29 + 105.30 +# Post install/remove commands for Tazpkg. 105.31 +post_install() 105.32 +{ 105.33 + [ "$IRQNE2K" ] && IRQNE2K="|irq=${IRQNE2K// /,}" 105.34 + [ "$IONE2K" ] && IONE2K="|io=${IONE2K// /,}" 105.35 + [ "$BADNE2K" == "ON" ] && BADNE2K="|bad" || BADNE2K="" 105.36 + echo "${PACKAGE#*-}${IONE2K:-|io=0x300}$IRQNE2K$BADNE2K" >> $1/modules 105.37 +} 105.38 + 105.39 +config_form() 105.40 +{ 105.41 + cat <<EOT 105.42 +<h4>NE2000 isa Ethernet driver</h4> 105.43 +<table> 105.44 +<tr> 105.45 +<td>I/O base (required)</td> 105.46 +<td><input type="text" name="IONE2K" value="0x300" 105.47 +title="Likely 0x300 0x280 0x320 0x340 0x360 or 0x380" /></td> 105.48 +</tr> 105.49 +<tr> 105.50 +<td>IRQ (optionnal)</td> 105.51 +<td><input type="text" name="IRQNE2K" /></td> 105.52 +</tr> 105.53 +</table> 105.54 +<input type="checkbox" name="BADNE2K" value="ON" /> 105.55 +Accept card with bad signatures<br> 105.56 +EOT 105.57 +}
106.1 --- a/module-nfs/receipt Thu Jul 18 13:24:21 2013 +0000 106.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 106.3 @@ -1,35 +0,0 @@ 106.4 -# SliTaz package receipt. 106.5 - 106.6 -PACKAGE="module-nfs" 106.7 -VERSION="2.6.37" 106.8 -CATEGORY="base-system" 106.9 -SHORT_DESC="Kernel module for the nfs filesystem" 106.10 -MAINTAINER="pascal.bellard@slitaz.org" 106.11 -LICENSE="GPL2" 106.12 -WEB_SITE="http://tiny.slitaz.org/" 106.13 -WANTED="kernel-modular" 106.14 -CONFIG_FILES="/etc/filesystems" 106.15 - 106.16 -# Rules to gen a SliTaz package suitable for Tazpkg. 106.17 -genpkg_rules() 106.18 -{ 106.19 - local path 106.20 - path=lib/modules/$VERSION-slitaz/kernel 106.21 - mkdir -p $fs/$path $fs/etc 106.22 - export src=$WOK/$WANTED/linux-$VERSION 106.23 - export _pkg=$src/_pkg 106.24 - $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 106.25 - dir=$path/$(dirname $module) 106.26 - [ -d $fs/$dir ] || mkdir -p $fs/$dir 106.27 - cp -a $_pkg/$path/$module $fs/$dir 106.28 - done 106.29 - touch $fs/etc/filesystems 106.30 -} 106.31 - 106.32 -# Post install/remove commands for Tazpkg. 106.33 -post_install() 106.34 -{ 106.35 - grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 106.36 - echo "${PACKAGE#*-}" >> $1/etc/filesystems 106.37 - chroot "$1/" depmod -a $VERSION-slitaz 106.38 -}
107.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 107.2 +++ b/module-nfsd/receipt Fri Oct 02 21:45:05 2015 +0200 107.3 @@ -0,0 +1,35 @@ 107.4 +# SliTaz package receipt. 107.5 + 107.6 +PACKAGE="module-nfsd" 107.7 +VERSION="2.6.14" 107.8 +CATEGORY="base-system" 107.9 +SHORT_DESC="Kernel module for the nfs filesystem (server side)" 107.10 +MAINTAINER="pascal.bellard@slitaz.org" 107.11 +LICENSE="GPL2" 107.12 +WEB_SITE="http://tiny.slitaz.org/" 107.13 +WANTED="linux" 107.14 +CONFIG_FILES="/etc/filesystems" 107.15 + 107.16 +# Rules to gen a SliTaz package suitable for Tazpkg. 107.17 +genpkg_rules() 107.18 +{ 107.19 + local path 107.20 + export src=$WOK/$WANTED/source/linux-$VERSION 107.21 + export _pkg=$WOK/$WANTED/install 107.22 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 107.23 + mkdir -p $fs/$path $fs/etc 107.24 + $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 107.25 + dir=$path/$(dirname $module) 107.26 + [ -d $fs/$dir ] || mkdir -p $fs/$dir 107.27 + cp -a $_pkg/$path/$module $fs/$dir 107.28 + done 107.29 + touch $fs/etc/filesystems 107.30 +} 107.31 + 107.32 +# Post install/remove commands for Tazpkg. 107.33 +post_install() 107.34 +{ 107.35 + echo ${PACKAGE#*-} >> $1/modules 107.36 + grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 107.37 + echo "${PACKAGE#*-}" >> $1/etc/filesystems 107.38 +}
108.1 --- a/module-reiserfs/receipt Thu Jul 18 13:24:21 2013 +0000 108.2 +++ b/module-reiserfs/receipt Fri Oct 02 21:45:05 2015 +0200 108.3 @@ -1,23 +1,23 @@ 108.4 # SliTaz package receipt. 108.5 108.6 PACKAGE="module-reiserfs" 108.7 -VERSION="2.6.37" 108.8 +VERSION="2.6.14" 108.9 CATEGORY="base-system" 108.10 SHORT_DESC="Kernel module for the reiserfs filesystem" 108.11 MAINTAINER="pascal.bellard@slitaz.org" 108.12 LICENSE="GPL2" 108.13 WEB_SITE="http://tiny.slitaz.org/" 108.14 -WANTED="kernel-modular" 108.15 +WANTED="linux" 108.16 CONFIG_FILES="/etc/filesystems" 108.17 108.18 # Rules to gen a SliTaz package suitable for Tazpkg. 108.19 genpkg_rules() 108.20 { 108.21 local path 108.22 - path=lib/modules/$VERSION-slitaz/kernel 108.23 + export src=$WOK/$WANTED/source/linux-$VERSION 108.24 + export _pkg=$WOK/$WANTED/install 108.25 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 108.26 mkdir -p $fs/$path $fs/etc 108.27 - export src=$WOK/$WANTED/linux-$VERSION 108.28 - export _pkg=$src/_pkg 108.29 $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 108.30 dir=$path/$(dirname $module) 108.31 [ -d $fs/$dir ] || mkdir -p $fs/$dir 108.32 @@ -29,7 +29,7 @@ 108.33 # Post install/remove commands for Tazpkg. 108.34 post_install() 108.35 { 108.36 + echo ${PACKAGE#*-} >> $1/modules 108.37 grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 108.38 echo "${PACKAGE#*-}" >> $1/etc/filesystems 108.39 - chroot "$1/" depmod -a $VERSION-slitaz 108.40 }
109.1 --- a/module-squashfs/receipt Thu Jul 18 13:24:21 2013 +0000 109.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 109.3 @@ -1,35 +0,0 @@ 109.4 -# SliTaz package receipt. 109.5 - 109.6 -PACKAGE="module-squashfs" 109.7 -VERSION="2.6.37" 109.8 -CATEGORY="base-system" 109.9 -SHORT_DESC="Kernel module for the squashfs filesystem" 109.10 -MAINTAINER="pascal.bellard@slitaz.org" 109.11 -LICENSE="GPL2" 109.12 -WEB_SITE="http://tiny.slitaz.org/" 109.13 -WANTED="kernel-modular" 109.14 -CONFIG_FILES="/etc/filesystems" 109.15 - 109.16 -# Rules to gen a SliTaz package suitable for Tazpkg. 109.17 -genpkg_rules() 109.18 -{ 109.19 - local path 109.20 - path=lib/modules/$VERSION-slitaz/kernel 109.21 - mkdir -p $fs/$path $fs/etc 109.22 - export src=$WOK/$WANTED/linux-$VERSION 109.23 - export _pkg=$src/_pkg 109.24 - $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 109.25 - dir=$path/$(dirname $module) 109.26 - [ -d $fs/$dir ] || mkdir -p $fs/$dir 109.27 - cp -a $_pkg/$path/$module $fs/$dir 109.28 - done 109.29 - touch $fs/etc/filesystems 109.30 -} 109.31 - 109.32 -# Post install/remove commands for Tazpkg. 109.33 -post_install() 109.34 -{ 109.35 - grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 109.36 - echo "${PACKAGE#*-}" >> $1/etc/filesystems 109.37 - chroot "$1/" depmod -a $VERSION-slitaz 109.38 -}
110.1 --- /dev/null Thu Jan 01 00:00:00 1970 +0000 110.2 +++ b/module-usb-storage/receipt Fri Oct 02 21:45:05 2015 +0200 110.3 @@ -0,0 +1,48 @@ 110.4 +# SliTaz package receipt. 110.5 + 110.6 +PACKAGE="module-usb-storage" 110.7 +VERSION="2.6.14" 110.8 +CATEGORY="base-system" 110.9 +SHORT_DESC="Kernel module for the USB storage devices" 110.10 +MAINTAINER="pascal.bellard@slitaz.org" 110.11 +LICENSE="GPL2" 110.12 +WEB_SITE="http://tiny.slitaz.org/" 110.13 +WANTED="linux" 110.14 + 110.15 +# Rules to gen a SliTaz package suitable for Tazpkg. 110.16 +genpkg_rules() 110.17 +{ 110.18 + local path 110.19 + export src=$WOK/$WANTED/source/linux-$VERSION 110.20 + export _pkg=$WOK/$WANTED/install 110.21 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 110.22 + mkdir -p $fs/$path 110.23 + $src/slitaz/list_modules.sh drivers/usb/storage/usb-storage.ko | while read module; do 110.24 + dir=$path/$(dirname $module) 110.25 + [ -d $fs/$dir ] || mkdir -p $fs/$dir 110.26 + cp -a $_pkg/$path/$module $fs/$dir 110.27 + done 110.28 +} 110.29 + 110.30 +# Post install/remove commands for Tazpkg. 110.31 +post_install() 110.32 +{ 110.33 + echo ${PACKAGE#*-} >> $1/modules 110.34 +} 110.35 + 110.36 +#scsi_mod.ko: 110.37 +#parm=scsi_logging_level:a bit mask of logging levels 110.38 +#parm=max_luns:last scsi LUN (should be between 1 and 2^32-1) 110.39 +#parm=max_report_luns:REPORT LUNS maximum number of LUNS received (should be between 1 and 16384) 110.40 +#parm=inq_timeout:Timeout (in seconds) waiting for devices to answer INQUIRY. Default is 5. Some non-compliant devices need more. 110.41 +#parm=dev_flags:Given scsi_dev_flags=vendor:model:flags[,v:m:f] add black/white list entries for vendor and model with an integer value of flags to the scsi device info list 110.42 +#parm=default_dev_flags:scsi default device flag integer value 110.43 + 110.44 +#usbcore.ko: 110.45 +#parm=blinkenlights:true to cycle leds on hubs 110.46 +#parm=old_scheme_first:start with the old device initialization scheme 110.47 +#parm=use_both_schemes:try the other device initialization scheme if the first one fails 110.48 +#parm=usbfs_snoop:true to log all usbfs traffic 110.49 + 110.50 +#usb-storage.ko: 110.51 +#parm=delay_use:seconds to delay before using a new device
111.1 --- a/module-vfat/receipt Thu Jul 18 13:24:21 2013 +0000 111.2 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 111.3 @@ -1,37 +0,0 @@ 111.4 -# SliTaz package receipt. 111.5 - 111.6 -PACKAGE="module-vfat" 111.7 -VERSION="2.6.37" 111.8 -CATEGORY="base-system" 111.9 -SHORT_DESC="Kernel module for the vfat filesystem" 111.10 -MAINTAINER="pascal.bellard@slitaz.org" 111.11 -LICENSE="GPL2" 111.12 -WEB_SITE="http://tiny.slitaz.org/" 111.13 -WANTED="kernel-modular" 111.14 -CONFIG_FILES="/etc/filesystems" 111.15 - 111.16 -# Rules to gen a SliTaz package suitable for Tazpkg. 111.17 -genpkg_rules() 111.18 -{ 111.19 - local path 111.20 - path=lib/modules/$VERSION-slitaz/kernel 111.21 - mkdir -p $fs/$path $fs/etc 111.22 - export src=$WOK/$WANTED/linux-$VERSION 111.23 - export _pkg=$src/_pkg 111.24 - $src/slitaz/list_modules.sh fs/fat | while read module; do 111.25 - dir=$path/$(dirname $module) 111.26 - [ -d $fs/$dir ] || mkdir -p $fs/$dir 111.27 - cp -a $_pkg/$path/$module $fs/$dir 111.28 - done 111.29 - touch $fs/etc/filesystems 111.30 -} 111.31 - 111.32 -# Post install/remove commands for Tazpkg. 111.33 -post_install() 111.34 -{ 111.35 - for i in vfat fat msdos ; do 111.36 - grep -qs ^$i$ $1/etc/filesystems || \ 111.37 - echo "$i" >> $1/etc/filesystems 111.38 - done 111.39 - chroot "$1/" depmod -a $VERSION-slitaz 111.40 -}
112.1 --- a/module-xfs/receipt Thu Jul 18 13:24:21 2013 +0000 112.2 +++ b/module-xfs/receipt Fri Oct 02 21:45:05 2015 +0200 112.3 @@ -1,23 +1,23 @@ 112.4 # SliTaz package receipt. 112.5 112.6 PACKAGE="module-xfs" 112.7 -VERSION="2.6.37" 112.8 +VERSION="2.6.14" 112.9 CATEGORY="base-system" 112.10 SHORT_DESC="Kernel module for the xfs filesystem" 112.11 MAINTAINER="pascal.bellard@slitaz.org" 112.12 LICENSE="GPL2" 112.13 WEB_SITE="http://tiny.slitaz.org/" 112.14 -WANTED="kernel-modular" 112.15 +WANTED="linux" 112.16 CONFIG_FILES="/etc/filesystems" 112.17 112.18 # Rules to gen a SliTaz package suitable for Tazpkg. 112.19 genpkg_rules() 112.20 { 112.21 local path 112.22 - path=lib/modules/$VERSION-slitaz/kernel 112.23 + export src=$WOK/$WANTED/source/linux-$VERSION 112.24 + export _pkg=$WOK/$WANTED/install 112.25 + path=lib/modules/$(ls $_pkg/lib/modules)/kernel 112.26 mkdir -p $fs/$path $fs/etc 112.27 - export src=$WOK/$WANTED/linux-$VERSION 112.28 - export _pkg=$src/_pkg 112.29 $src/slitaz/list_modules.sh fs/${PACKAGE#*-} | while read module; do 112.30 dir=$path/$(dirname $module) 112.31 [ -d $fs/$dir ] || mkdir -p $fs/$dir 112.32 @@ -29,7 +29,7 @@ 112.33 # Post install/remove commands for Tazpkg. 112.34 post_install() 112.35 { 112.36 + echo ${PACKAGE#*-} >> $1/modules 112.37 grep -qs ^${PACKAGE#*-}$ $1/etc/filesystems || \ 112.38 echo "${PACKAGE#*-}" >> $1/etc/filesystems 112.39 - chroot "$1/" depmod -a $VERSION-slitaz 112.40 }
113.1 --- a/ntp-config/receipt Thu Jul 18 13:24:21 2013 +0000 113.2 +++ b/ntp-config/receipt Fri Oct 02 21:45:05 2015 +0200 113.3 @@ -2,7 +2,7 @@ 113.4 113.5 PACKAGE="ntp-config" 113.6 VERSION="1.0" 113.7 -CATEGORY="configuration" 113.8 +CATEGORY="meta" 113.9 SHORT_DESC="Network time protocol configuration" 113.10 MAINTAINER="pascal.bellard@slitaz.org" 113.11 LICENSE="BSD"
114.1 --- a/p910nd/receipt Thu Jul 18 13:24:21 2013 +0000 114.2 +++ b/p910nd/receipt Fri Oct 02 21:45:05 2015 +0200 114.3 @@ -17,16 +17,15 @@ 114.4 # Rules to configure and make the package. 114.5 compile_rules() 114.6 { 114.7 - cd $src 114.8 make CC=uclibc-$TARGET-cc CFLAGS=-DLOCKFILE_DIR=\\\"/var/lock\\\" && 114.9 - make DESTDIR=$PWD/_pkg install 114.10 + make DESTDIR=$DESTDIR install 114.11 } 114.12 114.13 # Rules to gen a SliTaz package suitable for Tazpkg. 114.14 genpkg_rules() 114.15 { 114.16 mkdir -p $fs/usr $fs/etc/init.d $fs/dev 114.17 - cp -a $_pkg/usr/sbin $fs/usr 114.18 + cp -a $install/usr/sbin $fs/usr 114.19 ln -s daemon $fs/etc/init.d/p910nd 114.20 } 114.21
115.1 --- a/ppp-plugins-atm/receipt Thu Jul 18 13:24:21 2013 +0000 115.2 +++ b/ppp-plugins-atm/receipt Fri Oct 02 21:45:05 2015 +0200 115.3 @@ -1,7 +1,7 @@ 115.4 # SliTaz package receipt. 115.5 115.6 PACKAGE="ppp-plugins-atm" 115.7 -VERSION="2.4.5" 115.8 +VERSION="2.4.7" 115.9 CATEGORY="network" 115.10 SHORT_DESC="ppp extras ADSL using pppoatm" 115.11 MAINTAINER="pascal.bellard@slitaz.org" 115.12 @@ -15,7 +15,7 @@ 115.13 genpkg_rules() 115.14 { 115.15 mkdir -p $fs/usr/lib/pppd/$VERSION 115.16 - cp -a $_pkg/usr/lib/pppd/$VERSION/pppoatm.so $fs/usr/lib/pppd/$VERSION 115.17 + cp -a $install/usr/lib/pppd/$VERSION/pppoatm.so $fs/usr/lib/pppd/$VERSION 115.18 } 115.19 115.20 config_form()
116.1 --- a/ppp/receipt Thu Jul 18 13:24:21 2013 +0000 116.2 +++ b/ppp/receipt Fri Oct 02 21:45:05 2015 +0200 116.3 @@ -1,37 +1,36 @@ 116.4 # SliTaz package receipt. 116.5 116.6 PACKAGE="ppp" 116.7 -VERSION="2.4.5" 116.8 +VERSION="2.4.7" 116.9 CATEGORY="network" 116.10 SHORT_DESC="Point to Point Protocol (Internet with RTC modems)" 116.11 MAINTAINER="pascal.bellard@slitaz.org" 116.12 LICENSE="BSD GPL" 116.13 TARBALL="$PACKAGE-$VERSION.tar.gz" 116.14 WEB_SITE="http://ppp.samba.org/" 116.15 -WGET_URL="ftp://ftp.samba.org/pub/ppp/$TARBALL" 116.16 +WGET_URL="https://github.com/paulusmack/ppp/archive/$TARBALL" 116.17 [ -n "$TARGET" ] || TARGET="i486" 116.18 -BUILD_DEPENDS="uclibc-cross-compiler-$TARGET" 116.19 +BUILD_DEPENDS="wget uclibc-cross-compiler-$TARGET" 116.20 DEPENDS="libdl libgcc_s" 116.21 CONFIG_FILES="/etc/ppp/" 116.22 116.23 # Rules to configure and make the package. 116.24 compile_rules() 116.25 { 116.26 - cd $src 116.27 ./configure --prefix=/usr --mandir=/usr/share/man \ 116.28 - $CONFIGURE_ARGS && 116.29 + $CONFIGURE_ARGS && 116.30 make CC=uclibc-$TARGET-cc && 116.31 - make DESTDIR=$PWD/_pkg/usr install 116.32 + make DESTDIR=$DESTDIR/usr install 116.33 } 116.34 116.35 # Rules to gen a SliTaz package suitable for Tazpkg. 116.36 genpkg_rules() 116.37 { 116.38 mkdir -p $fs/etc/ppp/peers $fs/etc/ppp/scripts $fs/usr/sbin 116.39 - cp -a $_pkg/usr/sbin/pppd $fs/usr/sbin 116.40 + cp -a $install/usr/sbin/pppd $fs/usr/sbin 116.41 cp -a $src/scripts/ip-up.local.add $fs/etc/ppp/ip-up 116.42 cp -a $src/scripts/ip-down.local.add $fs/etc/ppp/ip-down 116.43 - cp -a stuff/* $fs 116.44 + cp -a $stuff/* $fs 116.45 cp -a $src/scripts/ppp-on $fs/etc/ppp/scripts 116.46 cp -a $src/scripts/ppp-on-dialer $fs/etc/ppp/scripts 116.47 cp -a $src/scripts/ppp-off $fs/etc/ppp/scripts
117.1 --- a/pppdump/receipt Thu Jul 18 13:24:21 2013 +0000 117.2 +++ b/pppdump/receipt Fri Oct 02 21:45:05 2015 +0200 117.3 @@ -1,7 +1,7 @@ 117.4 # SliTaz package receipt. 117.5 117.6 PACKAGE="pppdump" 117.7 -VERSION="2.4.5" 117.8 +VERSION="2.4.7" 117.9 CATEGORY="network" 117.10 SHORT_DESC="Point to Point Protocol debug tool" 117.11 MAINTAINER="pascal.bellard@slitaz.org" 117.12 @@ -14,6 +14,5 @@ 117.13 genpkg_rules() 117.14 { 117.15 mkdir -p $fs/usr/sbin 117.16 - cp -a $_pkg/usr/sbin/pppdump $fs/usr/sbin 117.17 + cp -a $install/usr/sbin/pppdump $fs/usr/sbin 117.18 } 117.19 -
118.1 --- a/pppstats/receipt Thu Jul 18 13:24:21 2013 +0000 118.2 +++ b/pppstats/receipt Fri Oct 02 21:45:05 2015 +0200 118.3 @@ -1,7 +1,7 @@ 118.4 # SliTaz package receipt. 118.5 118.6 PACKAGE="pppstats" 118.7 -VERSION="2.4.5" 118.8 +VERSION="2.4.7" 118.9 CATEGORY="network" 118.10 SHORT_DESC="Point to Point Protocol report tool" 118.11 MAINTAINER="pascal.bellard@slitaz.org" 118.12 @@ -14,5 +14,5 @@ 118.13 genpkg_rules() 118.14 { 118.15 mkdir -p $fs/usr/sbin 118.16 - cp -a $_pkg/usr/sbin/pppstats $fs/usr/sbin 118.17 + cp -a $install/usr/sbin/pppstats $fs/usr/sbin 118.18 }
119.1 --- a/rsync/receipt Thu Jul 18 13:24:21 2013 +0000 119.2 +++ b/rsync/receipt Fri Oct 02 21:45:05 2015 +0200 119.3 @@ -1,13 +1,13 @@ 119.4 # SliTaz package receipt. 119.5 119.6 PACKAGE="rsync" 119.7 -VERSION="3.0.9" 119.8 +VERSION="3.1.1" 119.9 CATEGORY="network" 119.10 SHORT_DESC="Utility that provides fast incremental." 119.11 MAINTAINER="pankso@slitaz.org" 119.12 LICENSE="GPL" 119.13 [ -n "$TARGET" ] || TARGET="i486" 119.14 -BUILD_DEPENDS="uclibc-cross-compiler-$TARGET" 119.15 +BUILD_DEPENDS="uclibc-cross-compiler-$TARGET perl" 119.16 DEPENDS="" 119.17 TARBALL="$PACKAGE-$VERSION.tar.gz" 119.18 WEB_SITE="http://rsync.samba.org/" 119.19 @@ -17,7 +17,6 @@ 119.20 # Rules to configure and make the package. 119.21 compile_rules() 119.22 { 119.23 - cd $src 119.24 sed -i 's/cross_compiling=no/cross_compiling=yes/' configure.sh 119.25 ./configure CC=uclibc-$TARGET-cc --host=i486-pc-linux-gnu \ 119.26 --prefix=/usr \ 119.27 @@ -30,18 +29,18 @@ 119.28 -e 's/HAVE_ICONV_OPEN ./HAVE_ICONV_OPEN 0/' config.h 119.29 sed -i 's/-liconv//' Makefile 119.30 make && 119.31 - make DESTDIR=$PWD/_pkg install 119.32 + make DESTDIR=$DESTDIR install 119.33 } 119.34 119.35 # Rules to gen a SliTaz package suitable for Tazpkg. 119.36 genpkg_rules() 119.37 { 119.38 mkdir -p $fs/usr 119.39 - cp -a $_pkg/usr/bin $fs/usr 119.40 + cp -a $install/usr/bin $fs/usr 119.41 # Config file is /etc/rsyncd.conf. 119.42 # User and passwd in /etc/rsyncd.secrets, syntax : user:passwd 119.43 # 119.44 - cp -a stuff/etc $fs 119.45 + cp -a $stuff/etc $fs 119.46 chown root.root $fs/etc/init.d/* 119.47 chmod 0644 $fs/etc/rsyncd.conf 119.48
120.1 --- a/runcom/receipt Thu Jul 18 13:24:21 2013 +0000 120.2 +++ b/runcom/receipt Fri Oct 02 21:45:05 2015 +0200 120.3 @@ -19,14 +19,14 @@ 120.4 sed '/linuxstart/!d;s/.*href="\([^"]*\)".*/\1/') 120.5 wget $WEB_SITE/$tarball 120.6 tar xzf $tarball 120.7 - mkdir -p _pkg/usr/bin 120.8 - uclibc-$TARGET-cc -o _pkg/usr/bin/runcom $(find . -name runcom.c) 120.9 + mkdir -p $DESTDIR/usr/bin 120.10 + uclibc-$TARGET-cc -o $DESTDIR/usr/bin/runcom $(find . -name runcom.c) 120.11 } 120.12 120.13 # Rules to gen a SliTaz package suitable for Tazpkg. 120.14 genpkg_rules() 120.15 { 120.16 - cp -a $_pkg/* $fs 120.17 + cp -a $install/* $fs 120.18 } 120.19 120.20 # Post install command for Tazpkg.
121.1 --- a/tcc-arm/receipt Thu Jul 18 13:24:21 2013 +0000 121.2 +++ b/tcc-arm/receipt Fri Oct 02 21:45:05 2015 +0200 121.3 @@ -14,8 +14,8 @@ 121.4 genpkg_rules() 121.5 { 121.6 mkdir -p $fs/usr/bin 121.7 - cp -a $_pkg/usr/bin/arm-tcc-vfp $fs/usr/bin 121.8 - cp -a $_pkg/usr/bin/arm-tcc-fpa-ld $fs/usr/bin 121.9 - cp -a $_pkg/usr/bin/arm-tcc-vfp-eabi $fs/usr/bin 121.10 - cp -a $_pkg/usr/bin/arm-tcc-fpa $fs/usr/bin 121.11 + cp -a $install/usr/bin/arm-tcc-vfp $fs/usr/bin 121.12 + cp -a $install/usr/bin/arm-tcc-fpa-ld $fs/usr/bin 121.13 + cp -a $install/usr/bin/arm-tcc-vfp-eabi $fs/usr/bin 121.14 + cp -a $install/usr/bin/arm-tcc-fpa $fs/usr/bin 121.15 }
122.1 --- a/tcc-c67/receipt Thu Jul 18 13:24:21 2013 +0000 122.2 +++ b/tcc-c67/receipt Fri Oct 02 21:45:05 2015 +0200 122.3 @@ -14,5 +14,5 @@ 122.4 genpkg_rules() 122.5 { 122.6 mkdir -p $fs/usr/bin 122.7 - cp -a $_pkg/usr/bin/c67-tcc $fs/usr/bin 122.8 + cp -a $install/usr/bin/c67-tcc $fs/usr/bin 122.9 }
123.1 --- a/tcc-common/receipt Thu Jul 18 13:24:21 2013 +0000 123.2 +++ b/tcc-common/receipt Fri Oct 02 21:45:05 2015 +0200 123.3 @@ -13,5 +13,5 @@ 123.4 genpkg_rules() 123.5 { 123.6 mkdir -p $fs/usr/lib 123.7 - cp -a $_pkg/usr/lib/tcc $fs/usr/lib 123.8 + cp -a $install/usr/lib/tcc $fs/usr/lib 123.9 }
124.1 --- a/tcc-win32/receipt Thu Jul 18 13:24:21 2013 +0000 124.2 +++ b/tcc-win32/receipt Fri Oct 02 21:45:05 2015 +0200 124.3 @@ -14,5 +14,5 @@ 124.4 genpkg_rules() 124.5 { 124.6 mkdir -p $fs/usr/bin 124.7 - cp -a $_pkg/usr/bin/i386-win32-tcc $fs/usr/bin 124.8 + cp -a $install/usr/bin/i386-win32-tcc $fs/usr/bin 124.9 }
125.1 --- a/tcc-x86_64/receipt Thu Jul 18 13:24:21 2013 +0000 125.2 +++ b/tcc-x86_64/receipt Fri Oct 02 21:45:05 2015 +0200 125.3 @@ -14,5 +14,5 @@ 125.4 genpkg_rules() 125.5 { 125.6 mkdir -p $fs/usr/bin 125.7 - cp -a $_pkg/usr/bin/x86_64-tcc $fs/usr/bin 125.8 + cp -a $install/usr/bin/x86_64-tcc $fs/usr/bin 125.9 }
126.1 --- a/tcc/receipt Thu Jul 18 13:24:21 2013 +0000 126.2 +++ b/tcc/receipt Fri Oct 02 21:45:05 2015 +0200 126.3 @@ -17,22 +17,24 @@ 126.4 # Rules to configure and make the package. 126.5 compile_rules() 126.6 { 126.7 - cd $src 126.8 if [ ! -f done.Makefile.u ]; then 126.9 - patch < ../stuff/Makefile.u || return 1 126.10 + patch < $stuff/Makefile.u || return 1 126.11 touch done.Makefile.u 126.12 fi 126.13 sed -i 's/cp -u/cp/' tests/Makefile 126.14 ./configure --prefix=/usr --enable-cross \ 126.15 --cross-prefix=uclibc-$TARGET- && 126.16 - make && make DESTDIR=$PWD/_pkg install 126.17 + make && make DESTDIR=$DESTDIR install 126.18 + [ -s $DESTDIR/usr/bin/i386-tcc -a ! -s $DESTDIR/usr/bin/x86_64-tcc ] && 126.19 + mv $DESTDIR/usr/bin/tcc $DESTDIR/usr/bin/x86_64-tcc && 126.20 + mv $DESTDIR/usr/bin/i386-tcc $DESTDIR/usr/bin/tcc 126.21 } 126.22 126.23 # Rules to gen a SliTaz package suitable for Tazpkg. 126.24 genpkg_rules() 126.25 { 126.26 mkdir -p $fs/usr/bin 126.27 - cp -a $_pkg/usr/bin/tcc $fs/usr/bin 126.28 + cp -a $install/usr/bin/tcc $fs/usr/bin 126.29 ln -s tcc $fs/usr/bin/cc 126.30 } 126.31
127.1 --- a/telnet-config/receipt Thu Jul 18 13:24:21 2013 +0000 127.2 +++ b/telnet-config/receipt Fri Oct 02 21:45:05 2015 +0200 127.3 @@ -2,7 +2,7 @@ 127.4 127.5 PACKAGE="telnet-config" 127.6 VERSION="1.0" 127.7 -CATEGORY="configuration" 127.8 +CATEGORY="meta" 127.9 SHORT_DESC="Enable Telnet server" 127.10 MAINTAINER="pascal.bellard@slitaz.org" 127.11 LICENSE="BSD"
128.1 --- a/udhcpd-config/receipt Thu Jul 18 13:24:21 2013 +0000 128.2 +++ b/udhcpd-config/receipt Fri Oct 02 21:45:05 2015 +0200 128.3 @@ -2,7 +2,7 @@ 128.4 128.5 PACKAGE="udhcpd-config" 128.6 VERSION="1.0" 128.7 -CATEGORY="configuration" 128.8 +CATEGORY="meta" 128.9 SHORT_DESC="DHCP server configuration file" 128.10 MAINTAINER="pascal.bellard@slitaz.org" 128.11 LICENSE="BSD"
129.1 --- a/wiki/receipt Thu Jul 18 13:24:21 2013 +0000 129.2 +++ b/wiki/receipt Fri Oct 02 21:45:05 2015 +0200 129.3 @@ -13,7 +13,7 @@ 129.4 # Rules to gen a SliTaz package suitable for Tazpkg. 129.5 genpkg_rules() 129.6 { 129.7 - cp -a stuff/. $fs 129.8 + cp -a $stuff/. $fs 129.9 } 129.10 129.11 post_install()
130.1 --- a/zlib/receipt Thu Jul 18 13:24:21 2013 +0000 130.2 +++ b/zlib/receipt Fri Oct 02 21:45:05 2015 +0200 130.3 @@ -15,7 +15,6 @@ 130.4 # Rules to configure and make the package. 130.5 compile_rules() 130.6 { 130.7 - cd $PACKAGE-$VERSION 130.8 ./configure --shared --prefix=/usr \ 130.9 --libdir=/usr/share/uclibc-cross-compiler-$TARGET/lib \ 130.10 --includedir=/usr/share/uclibc-cross-compiler-$TARGET/include 130.11 @@ -27,5 +26,5 @@ 130.12 genpkg_rules() 130.13 { 130.14 mkdir -p $fs/usr/lib 130.15 - cp -a $PACKAGE-$VERSION/libz.so* $fs/usr/lib 130.16 + cp -a $src/libz.so* $fs/usr/lib 130.17 }