wok annotate motion/stuff/motion.conf @ rev 25002

updated nrg2iso (0.4 -> 0.4.1)
author Hans-G?nter Theisgen
date Mon May 16 14:45:30 2022 +0100 (2022-05-16)
parents
children
rev   line source
pankso@13652 1 # Rename this distribution example file to motion.conf
pankso@13652 2 #
pankso@13652 3 # This config file was generated by motion 3.2.12
pankso@13652 4
pankso@13652 5
pankso@13652 6 ############################################################
pankso@13652 7 # Daemon
pankso@13652 8 ############################################################
pankso@13652 9
pankso@13652 10 # Start in daemon (background) mode and release terminal (default: off)
pankso@13652 11 daemon on
pankso@13652 12
pankso@13652 13 # File to store the process ID, also called pid file. (default: not defined)
pankso@13652 14 process_id_file /run/motion/motion.pid
pankso@13652 15
pankso@13652 16 ############################################################
pankso@13652 17 # Basic Setup Mode
pankso@13652 18 ############################################################
pankso@13652 19
pankso@13652 20 # Start in Setup-Mode, daemon disabled. (default: off)
pankso@13652 21 setup_mode off
pankso@13652 22
pankso@13652 23 ###########################################################
pankso@13652 24 # Capture device options
pankso@13652 25 ############################################################
pankso@13652 26
pankso@13652 27 # Videodevice to be used for capturing (default /dev/video0)
pankso@13652 28 # for FreeBSD default is /dev/bktr0
pankso@13652 29 videodevice /dev/video0
pankso@13652 30
pankso@13652 31 # v4l2_palette allows to choose preferable palette to be use by motion
pankso@13652 32 # to capture from those supported by your videodevice. (default: 8)
pankso@13652 33 # E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
pankso@13652 34 # V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
pankso@13652 35 # Setting v4l2_palette to 1 forces motion to use V4L2_PIX_FMT_SBGGR8
pankso@13652 36 # instead.
pankso@13652 37 #
pankso@13652 38 # Values :
pankso@13652 39 # V4L2_PIX_FMT_SN9C10X : 0 'S910'
pankso@13652 40 # V4L2_PIX_FMT_SBGGR8 : 1 'BA81'
pankso@13652 41 # V4L2_PIX_FMT_MJPEG : 2 'MJPEG'
pankso@13652 42 # V4L2_PIX_FMT_JPEG : 3 'JPEG'
pankso@13652 43 # V4L2_PIX_FMT_RGB24 : 4 'RGB3'
pankso@13652 44 # V4L2_PIX_FMT_UYVY : 5 'UYVY'
pankso@13652 45 # V4L2_PIX_FMT_YUYV : 6 'YUYV'
pankso@13652 46 # V4L2_PIX_FMT_YUV422P : 7 '422P'
pankso@13652 47 # V4L2_PIX_FMT_YUV420 : 8 'YU12'
pankso@13652 48 v4l2_palette 8
pankso@13652 49
pankso@13652 50 # Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
pankso@13652 51 # This is ONLY used for FreeBSD. Leave it commented out for Linux
pankso@13652 52 ; tunerdevice /dev/tuner0
pankso@13652 53
pankso@13652 54 # The video input to be used (default: 8)
pankso@13652 55 # Should normally be set to 0 or 1 for video/TV cards, and 8 for USB cameras
pankso@13652 56 input 8
pankso@13652 57
pankso@13652 58 # The video norm to use (only for video capture and TV tuner cards)
pankso@13652 59 # Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
pankso@13652 60 norm 0
pankso@13652 61
pankso@13652 62 # The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
pankso@13652 63 frequency 0
pankso@13652 64
pankso@13652 65 # Rotate image this number of degrees. The rotation affects all saved images as
pankso@13652 66 # well as mpeg movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
pankso@13652 67 rotate 0
pankso@13652 68
pankso@13652 69 # Image width (pixels). Valid range: Camera dependent, default: 352
pankso@13652 70 width 320
pankso@13652 71
pankso@13652 72 # Image height (pixels). Valid range: Camera dependent, default: 288
pankso@13652 73 height 240
pankso@13652 74
pankso@13652 75 # Maximum number of frames to be captured per second.
pankso@13652 76 # Valid range: 2-100. Default: 100 (almost no limit).
pankso@13652 77 framerate 2
pankso@13652 78
pankso@13652 79 # Minimum time in seconds between capturing picture frames from the camera.
pankso@13652 80 # Default: 0 = disabled - the capture rate is given by the camera framerate.
pankso@13652 81 # This option is used when you want to capture images at a rate lower than 2 per second.
pankso@13652 82 minimum_frame_time 0
pankso@13652 83
pankso@13652 84 # URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///)
pankso@13652 85 # Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
pankso@13652 86 ; netcam_url value
pankso@13652 87
pankso@13652 88 # Username and password for network camera (only if required). Default: not defined
pankso@13652 89 # Syntax is user:password
pankso@13652 90 ; netcam_userpass value
pankso@13652 91
pankso@13652 92 # The setting for keep-alive of network socket, should improve performance on compatible net cameras.
pankso@13652 93 # 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request.
pankso@13652 94 # keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
pankso@13652 95 # 1.1: Use HTTP/1.1 requests that support keep alive as default.
pankso@13652 96 # Default: 1.0
pankso@13652 97 ; netcam_http 1.0
pankso@13652 98
pankso@13652 99 # URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
pankso@13652 100 # If a port number other than 80 is needed, use "http://myproxy:1234".
pankso@13652 101 # Default: not defined
pankso@13652 102 ; netcam_proxy value
pankso@13652 103
pankso@13652 104 # Set less strict jpeg checks for network cameras with a poor/buggy firmware.
pankso@13652 105 # Default: off
pankso@13652 106 netcam_tolerant_check off
pankso@13652 107
pankso@13652 108 # Let motion regulate the brightness of a video device (default: off).
pankso@13652 109 # The auto_brightness feature uses the brightness option as its target value.
pankso@13652 110 # If brightness is zero auto_brightness will adjust to average brightness value 128.
pankso@13652 111 # Only recommended for cameras without auto brightness
pankso@13652 112 auto_brightness off
pankso@13652 113
pankso@13652 114 # Set the initial brightness of a video device.
pankso@13652 115 # If auto_brightness is enabled, this value defines the average brightness level
pankso@13652 116 # which Motion will try and adjust to.
pankso@13652 117 # Valid range 0-255, default 0 = disabled
pankso@13652 118 brightness 0
pankso@13652 119
pankso@13652 120 # Set the contrast of a video device.
pankso@13652 121 # Valid range 0-255, default 0 = disabled
pankso@13652 122 contrast 0
pankso@13652 123
pankso@13652 124 # Set the saturation of a video device.
pankso@13652 125 # Valid range 0-255, default 0 = disabled
pankso@13652 126 saturation 0
pankso@13652 127
pankso@13652 128 # Set the hue of a video device (NTSC feature).
pankso@13652 129 # Valid range 0-255, default 0 = disabled
pankso@13652 130 hue 0
pankso@13652 131
pankso@13652 132
pankso@13652 133 ############################################################
pankso@13652 134 # Round Robin (multiple inputs on same video device name)
pankso@13652 135 ############################################################
pankso@13652 136
pankso@13652 137 # Number of frames to capture in each roundrobin step (default: 1)
pankso@13652 138 roundrobin_frames 1
pankso@13652 139
pankso@13652 140 # Number of frames to skip before each roundrobin step (default: 1)
pankso@13652 141 roundrobin_skip 1
pankso@13652 142
pankso@13652 143 # Try to filter out noise generated by roundrobin (default: off)
pankso@13652 144 switchfilter off
pankso@13652 145
pankso@13652 146
pankso@13652 147 ############################################################
pankso@13652 148 # Motion Detection Settings:
pankso@13652 149 ############################################################
pankso@13652 150
pankso@13652 151 # Threshold for number of changed pixels in an image that
pankso@13652 152 # triggers motion detection (default: 1500)
pankso@13652 153 threshold 1500
pankso@13652 154
pankso@13652 155 # Automatically tune the threshold down if possible (default: off)
pankso@13652 156 threshold_tune off
pankso@13652 157
pankso@13652 158 # Noise threshold for the motion detection (default: 32)
pankso@13652 159 noise_level 32
pankso@13652 160
pankso@13652 161 # Automatically tune the noise threshold (default: on)
pankso@13652 162 noise_tune on
pankso@13652 163
pankso@13652 164 # Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
pankso@13652 165 # Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
pankso@13652 166 # (l)abeling must only be used once and the 'l' must be the last letter.
pankso@13652 167 # Comment out to disable
pankso@13652 168 despeckle EedDl
pankso@13652 169
pankso@13652 170 # Detect motion in predefined areas (1 - 9). Areas are numbered like that: 1 2 3
pankso@13652 171 # A script (on_area_detected) is started immediately when motion is 4 5 6
pankso@13652 172 # detected in one of the given areas, but only once during an event. 7 8 9
pankso@13652 173 # One or more areas can be specified with this option. (Default: not defined)
pankso@13652 174 ; area_detect value
pankso@13652 175
pankso@13652 176 # PGM file to use as a sensitivity mask.
pankso@13652 177 # Full path name to. (Default: not defined)
pankso@13652 178 ; mask_file value
pankso@13652 179
pankso@13652 180 # Dynamically create a mask file during operation (default: 0)
pankso@13652 181 # Adjust speed of mask changes from 0 (off) to 10 (fast)
pankso@13652 182 smart_mask_speed 0
pankso@13652 183
pankso@13652 184 # Ignore sudden massive light intensity changes given as a percentage of the picture
pankso@13652 185 # area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
pankso@13652 186 lightswitch 0
pankso@13652 187
pankso@13652 188 # Picture frames must contain motion at least the specified number of frames
pankso@13652 189 # in a row before they are detected as true motion. At the default of 1, all
pankso@13652 190 # motion is detected. Valid range: 1 to thousands, recommended 1-5
pankso@13652 191 minimum_motion_frames 1
pankso@13652 192
pankso@13652 193 # Specifies the number of pre-captured (buffered) pictures from before motion
pankso@13652 194 # was detected that will be output at motion detection.
pankso@13652 195 # Recommended range: 0 to 5 (default: 0)
pankso@13652 196 # Do not use large values! Large values will cause Motion to skip video frames and
pankso@13652 197 # cause unsmooth mpegs. To smooth mpegs use larger values of post_capture instead.
pankso@13652 198 pre_capture 0
pankso@13652 199
pankso@13652 200 # Number of frames to capture after motion is no longer detected (default: 0)
pankso@13652 201 post_capture 0
pankso@13652 202
pankso@13652 203 # Gap is the seconds of no motion detection that triggers the end of an event
pankso@13652 204 # An event is defined as a series of motion images taken within a short timeframe.
pankso@13652 205 # Recommended value is 60 seconds (Default). The value 0 is allowed and disables
pankso@13652 206 # events causing all Motion to be written to one single mpeg file and no pre_capture.
pankso@13652 207 gap 60
pankso@13652 208
pankso@13652 209 # Maximum length in seconds of an mpeg movie
pankso@13652 210 # When value is exceeded a new mpeg file is created. (Default: 0 = infinite)
pankso@13652 211 max_mpeg_time 0
pankso@13652 212
pankso@13652 213 # Always save images even if there was no motion (default: off)
pankso@13652 214 output_all off
pankso@13652 215
pankso@13652 216
pankso@13652 217 ############################################################
pankso@13652 218 # Image File Output
pankso@13652 219 ############################################################
pankso@13652 220
pankso@13652 221 # Output 'normal' pictures when motion is detected (default: on)
pankso@13652 222 # Valid values: on, off, first, best, center
pankso@13652 223 # When set to 'first', only the first picture of an event is saved.
pankso@13652 224 # Picture with most motion of an event is saved when set to 'best'.
pankso@13652 225 # Picture with motion nearest center of picture is saved when set to 'center'.
pankso@13652 226 # Can be used as preview shot for the corresponding movie.
pankso@13652 227 output_normal on
pankso@13652 228
pankso@13652 229 # Output pictures with only the pixels moving object (ghost images) (default: off)
pankso@13652 230 output_motion off
pankso@13652 231
pankso@13652 232 # The quality (in percent) to be used by the jpeg compression (default: 75)
pankso@13652 233 quality 75
pankso@13652 234
pankso@13652 235 # Output ppm images instead of jpeg (default: off)
pankso@13652 236 ppm off
pankso@13652 237
pankso@13652 238
pankso@13652 239 ############################################################
pankso@13652 240 # FFMPEG related options
pankso@13652 241 # Film (mpeg) file output, and deinterlacing of the video input
pankso@13652 242 # The options movie_filename and timelapse_filename are also used
pankso@13652 243 # by the ffmpeg feature
pankso@13652 244 ############################################################
pankso@13652 245
pankso@13652 246 # Use ffmpeg to encode mpeg movies in realtime (default: off)
pankso@13652 247 #ffmpeg_cap_new on
pankso@13652 248
pankso@13652 249 # Use ffmpeg to make movies with only the pixels moving
pankso@13652 250 # object (ghost images) (default: off)
pankso@13652 251 #ffmpeg_cap_motion off
pankso@13652 252
pankso@13652 253 # Use ffmpeg to encode a timelapse movie
pankso@13652 254 # Default value 0 = off - else save frame every Nth second
pankso@13652 255 #ffmpeg_timelapse 0
pankso@13652 256
pankso@13652 257 # The file rollover mode of the timelapse video
pankso@13652 258 # Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
pankso@13652 259 #ffmpeg_timelapse_mode daily
pankso@13652 260
pankso@13652 261 # Bitrate to be used by the ffmpeg encoder (default: 400000)
pankso@13652 262 # This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
pankso@13652 263 #ffmpeg_bps 500000
pankso@13652 264
pankso@13652 265 # Enables and defines variable bitrate for the ffmpeg encoder.
pankso@13652 266 # ffmpeg_bps is ignored if variable bitrate is enabled.
pankso@13652 267 # Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
pankso@13652 268 # or the range 2 - 31 where 2 means best quality and 31 is worst.
pankso@13652 269 #ffmpeg_variable_bitrate 0
pankso@13652 270
pankso@13652 271 # Codec to used by ffmpeg for the video compression.
pankso@13652 272 # Timelapse mpegs are always made in mpeg1 format independent from this option.
pankso@13652 273 # Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
pankso@13652 274 # mpeg1 - gives you files with extension .mpg
pankso@13652 275 # mpeg4 or msmpeg4 - gives you files with extension .avi
pankso@13652 276 # msmpeg4 is recommended for use with Windows Media Player because
pankso@13652 277 # it requires no installation of codec on the Windows client.
pankso@13652 278 # swf - gives you a flash film with extension .swf
pankso@13652 279 # flv - gives you a flash video with extension .flv
pankso@13652 280 # ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
pankso@13652 281 # mov - QuickTime ( testing )
pankso@13652 282 #ffmpeg_video_codec mpeg4
pankso@13652 283
pankso@13652 284 # Use ffmpeg to deinterlace video. Necessary if you use an analog camera
pankso@13652 285 # and see horizontal combing on moving objects in video or pictures.
pankso@13652 286 # (default: off)
pankso@13652 287 #ffmpeg_deinterlace off
pankso@13652 288
pankso@13652 289
pankso@13652 290 ############################################################
pankso@13652 291 # Snapshots (Traditional Periodic Webcam File Output)
pankso@13652 292 ############################################################
pankso@13652 293
pankso@13652 294 # Make automated snapshot every N seconds (default: 0 = disabled)
pankso@13652 295 snapshot_interval 0
pankso@13652 296
pankso@13652 297
pankso@13652 298 ############################################################
pankso@13652 299 # Text Display
pankso@13652 300 # %Y = year, %m = month, %d = date,
pankso@13652 301 # %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
pankso@13652 302 # %v = event, %q = frame number, %t = thread (camera) number,
pankso@13652 303 # %D = changed pixels, %N = noise level, \n = new line,
pankso@13652 304 # %i and %J = width and height of motion area,
pankso@13652 305 # %K and %L = X and Y coordinates of motion center
pankso@13652 306 # %C = value defined by text_event - do not use with text_event!
pankso@13652 307 # You can put quotation marks around the text to allow
pankso@13652 308 # leading spaces
pankso@13652 309 ############################################################
pankso@13652 310
pankso@13652 311 # Locate and draw a box around the moving object.
pankso@13652 312 # Valid values: on, off and preview (default: off)
pankso@13652 313 # Set to 'preview' will only draw a box in preview_shot pictures.
pankso@13652 314 locate off
pankso@13652 315
pankso@13652 316 # Draws the timestamp using same options as C function strftime(3)
pankso@13652 317 # Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
pankso@13652 318 # Text is placed in lower right corner
pankso@13652 319 text_right %Y-%m-%d\n%T-%q
pankso@13652 320
pankso@13652 321 # Draw a user defined text on the images using same options as C function strftime(3)
pankso@13652 322 # Default: Not defined = no text
pankso@13652 323 # Text is placed in lower left corner
pankso@13652 324 ; text_left CAMERA %t
pankso@13652 325
pankso@13652 326 # Draw the number of changed pixed on the images (default: off)
pankso@13652 327 # Will normally be set to off except when you setup and adjust the motion settings
pankso@13652 328 # Text is placed in upper right corner
pankso@13652 329 text_changes off
pankso@13652 330
pankso@13652 331 # This option defines the value of the special event conversion specifier %C
pankso@13652 332 # You can use any conversion specifier in this option except %C. Date and time
pankso@13652 333 # values are from the timestamp of the first image in the current event.
pankso@13652 334 # Default: %Y%m%d%H%M%S
pankso@13652 335 # The idea is that %C can be used filenames and text_left/right for creating
pankso@13652 336 # a unique identifier for each event.
pankso@13652 337 text_event %Y%m%d%H%M%S
pankso@13652 338
pankso@13652 339 # Draw characters at twice normal size on images. (default: off)
pankso@13652 340 text_double off
pankso@13652 341
pankso@13652 342
pankso@13652 343 ############################################################
pankso@13652 344 # Target Directories and filenames For Images And Films
pankso@13652 345 # For the options snapshot_, jpeg_, mpeg_ and timelapse_filename
pankso@13652 346 # you can use conversion specifiers
pankso@13652 347 # %Y = year, %m = month, %d = date,
pankso@13652 348 # %H = hour, %M = minute, %S = second,
pankso@13652 349 # %v = event, %q = frame number, %t = thread (camera) number,
pankso@13652 350 # %D = changed pixels, %N = noise level,
pankso@13652 351 # %i and %J = width and height of motion area,
pankso@13652 352 # %K and %L = X and Y coordinates of motion center
pankso@13652 353 # %C = value defined by text_event
pankso@13652 354 # Quotation marks round string are allowed.
pankso@13652 355 ############################################################
pankso@13652 356
pankso@13652 357 # Target base directory for pictures and films
pankso@13652 358 # Recommended to use absolute path. (Default: current working directory)
pankso@13652 359 target_dir /var/lib/motion/cam1
pankso@13652 360
pankso@13652 361 # File path for snapshots (jpeg or ppm) relative to target_dir
pankso@13652 362 # Default: %v-%Y%m%d%H%M%S-snapshot
pankso@13652 363 # Default value is equivalent to legacy oldlayout option
pankso@13652 364 # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
pankso@13652 365 # File extension .jpg or .ppm is automatically added so do not include this.
pankso@13652 366 # Note: A symbolic link called lastsnap.jpg created in the target_dir will always
pankso@13652 367 # point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
pankso@13652 368 snapshot_filename %v-%Y%m%d%H%M%S-snapshot
pankso@13652 369
pankso@13652 370 # File path for motion triggered images (jpeg or ppm) relative to target_dir
pankso@13652 371 # Default: %v-%Y%m%d%H%M%S-%q
pankso@13652 372 # Default value is equivalent to legacy oldlayout option
pankso@13652 373 # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
pankso@13652 374 # File extension .jpg or .ppm is automatically added so do not include this
pankso@13652 375 # Set to 'preview' together with best-preview feature enables special naming
pankso@13652 376 # convention for preview shots. See motion guide for details
pankso@13652 377 jpeg_filename %v-%Y%m%d%H%M%S-%q
pankso@13652 378
pankso@13652 379 # File path for motion triggered ffmpeg films (mpeg) relative to target_dir
pankso@13652 380 # Default: %v-%Y%m%d%H%M%S
pankso@13652 381 # Default value is equivalent to legacy oldlayout option
pankso@13652 382 # For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
pankso@13652 383 # File extension .mpg or .avi is automatically added so do not include this
pankso@13652 384 # This option was previously called ffmpeg_filename
pankso@13652 385 #movie_filename %v-%Y%m%d%H%M%S
pankso@13652 386
pankso@13652 387 # File path for timelapse mpegs relative to target_dir
pankso@13652 388 # Default: %Y%m%d-timelapse
pankso@13652 389 # Default value is near equivalent to legacy oldlayout option
pankso@13652 390 # For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
pankso@13652 391 # File extension .mpg is automatically added so do not include this
pankso@13652 392 #timelapse_filename %Y%m%d-timelapse
pankso@13652 393
pankso@13652 394
pankso@13652 395 ############################################################
pankso@13652 396 # Live Webcam Server
pankso@13652 397 ############################################################
pankso@13652 398
pankso@13652 399 # The mini-http server listens to this port for requests (default: 0 = disabled)
pankso@13652 400 webcam_port 8081
pankso@13652 401
pankso@13652 402 # Quality of the jpeg (in percent) images produced (default: 50)
pankso@13652 403 webcam_quality 50
pankso@13652 404
pankso@13652 405 # Output frames at 1 fps when no motion is detected and increase to the
pankso@13652 406 # rate given by webcam_maxrate when motion is detected (default: off)
pankso@13652 407 webcam_motion off
pankso@13652 408
pankso@13652 409 # Maximum framerate for webcam streams (default: 1)
pankso@13652 410 webcam_maxrate 1
pankso@13652 411
pankso@13652 412 # Restrict webcam connections to localhost only (default: on)
pankso@13652 413 webcam_localhost on
pankso@13652 414
pankso@13652 415 # Limits the number of images per connection (default: 0 = unlimited)
pankso@13652 416 # Number can be defined by multiplying actual webcam rate by desired number of seconds
pankso@13652 417 # Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate
pankso@13652 418 webcam_limit 0
pankso@13652 419
pankso@13652 420
pankso@13652 421 ############################################################
pankso@13652 422 # HTTP Based Control
pankso@13652 423 ############################################################
pankso@13652 424
pankso@13652 425 # TCP/IP port for the http server to listen on (default: 0 = disabled)
pankso@13652 426 control_port 8080
pankso@13652 427
pankso@13652 428 # Restrict control connections to localhost only (default: on)
pankso@13652 429 control_localhost on
pankso@13652 430
pankso@13652 431 # Output for http server, select off to choose raw text plain (default: on)
pankso@13652 432 control_html_output on
pankso@13652 433
pankso@13652 434 # Authentication for the http based control. Syntax username:password
pankso@13652 435 # Default: not defined (Disabled)
pankso@13652 436 ; control_authentication username:password
pankso@13652 437
pankso@13652 438
pankso@13652 439 ############################################################
pankso@13652 440 # Tracking (Pan/Tilt)
pankso@13652 441 ############################################################
pankso@13652 442
pankso@13652 443 # Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo)
pankso@13652 444 # The generic type enables the definition of motion center and motion size to
pankso@13652 445 # be used with the conversion specifiers for options like on_motion_detected
pankso@13652 446 track_type 0
pankso@13652 447
pankso@13652 448 # Enable auto tracking (default: off)
pankso@13652 449 track_auto off
pankso@13652 450
pankso@13652 451 # Serial port of motor (default: none)
pankso@13652 452 ; track_port value
pankso@13652 453
pankso@13652 454 # Motor number for x-axis (default: 0)
pankso@13652 455 track_motorx 0
pankso@13652 456
pankso@13652 457 # Motor number for y-axis (default: 0)
pankso@13652 458 track_motory 0
pankso@13652 459
pankso@13652 460 # Maximum value on x-axis (default: 0)
pankso@13652 461 track_maxx 0
pankso@13652 462
pankso@13652 463 # Maximum value on y-axis (default: 0)
pankso@13652 464 track_maxy 0
pankso@13652 465
pankso@13652 466 # ID of an iomojo camera if used (default: 0)
pankso@13652 467 track_iomojo_id 0
pankso@13652 468
pankso@13652 469 # Angle in degrees the camera moves per step on the X-axis
pankso@13652 470 # with auto-track (default: 10)
pankso@13652 471 # Currently only used with pwc type cameras
pankso@13652 472 track_step_angle_x 10
pankso@13652 473
pankso@13652 474 # Angle in degrees the camera moves per step on the Y-axis
pankso@13652 475 # with auto-track (default: 10)
pankso@13652 476 # Currently only used with pwc type cameras
pankso@13652 477 track_step_angle_y 10
pankso@13652 478
pankso@13652 479 # Delay to wait for after tracking movement as number
pankso@13652 480 # of picture frames (default: 10)
pankso@13652 481 track_move_wait 10
pankso@13652 482
pankso@13652 483 # Speed to set the motor to (stepper motor option) (default: 255)
pankso@13652 484 track_speed 255
pankso@13652 485
pankso@13652 486 # Number of steps to make (stepper motor option) (default: 40)
pankso@13652 487 track_stepsize 40
pankso@13652 488
pankso@13652 489
pankso@13652 490 ############################################################
pankso@13652 491 # External Commands, Warnings and Logging:
pankso@13652 492 # You can use conversion specifiers for the on_xxxx commands
pankso@13652 493 # %Y = year, %m = month, %d = date,
pankso@13652 494 # %H = hour, %M = minute, %S = second,
pankso@13652 495 # %v = event, %q = frame number, %t = thread (camera) number,
pankso@13652 496 # %D = changed pixels, %N = noise level,
pankso@13652 497 # %i and %J = width and height of motion area,
pankso@13652 498 # %K and %L = X and Y coordinates of motion center
pankso@13652 499 # %C = value defined by text_event
pankso@13652 500 # %f = filename with full path
pankso@13652 501 # %n = number indicating filetype
pankso@13652 502 # Both %f and %n are only defined for on_picture_save,
pankso@13652 503 # on_movie_start and on_movie_end
pankso@13652 504 # Quotation marks round string are allowed.
pankso@13652 505 ############################################################
pankso@13652 506
pankso@13652 507 # Do not sound beeps when detecting motion (default: on)
pankso@13652 508 # Note: Motion never beeps when running in daemon mode.
pankso@13652 509 quiet on
pankso@13652 510
pankso@13652 511 # Command to be executed when an event starts. (default: none)
pankso@13652 512 # An event starts at first motion detected after a period of no motion defined by gap
pankso@13652 513 ; on_event_start value
pankso@13652 514
pankso@13652 515 # Command to be executed when an event ends after a period of no motion
pankso@13652 516 # (default: none). The period of no motion is defined by option gap.
pankso@13652 517 ; on_event_end value
pankso@13652 518
pankso@13652 519 # Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
pankso@13652 520 # To give the filename as an argument to a command append it with %f
pankso@13652 521 ; on_picture_save value
pankso@13652 522
pankso@13652 523 # Command to be executed when a motion frame is detected (default: none)
pankso@13652 524 ; on_motion_detected value
pankso@13652 525
pankso@13652 526 # Command to be executed when motion in a predefined area is detected
pankso@13652 527 # Check option 'area_detect'. (default: none)
pankso@13652 528 ; on_area_detected value
pankso@13652 529
pankso@13652 530 # Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
pankso@13652 531 # To give the filename as an argument to a command append it with %f
pankso@13652 532 ; on_movie_start value
pankso@13652 533
pankso@13652 534 # Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
pankso@13652 535 # To give the filename as an argument to a command append it with %f
pankso@13652 536 ; on_movie_end value
pankso@13652 537
pankso@13652 538 # Command to be executed when a camera can't be opened or if it is lost
pankso@13652 539 # NOTE: There is situations when motion doesn't detect a lost camera!
pankso@13652 540 # It depends on the driver, some drivers don't detect a lost camera at all
pankso@13652 541 # Some hang the motion thread. Some even hang the PC! (default: none)
pankso@13652 542 ; on_camera_lost value
pankso@13652 543
pankso@13652 544 ############################################################
pankso@13652 545 # Common Options For MySQL and PostgreSQL database features.
pankso@13652 546 # Options require the MySQL/PostgreSQL options to be active also.
pankso@13652 547 ############################################################
pankso@13652 548
pankso@13652 549 # Log to the database when creating motion triggered image file (default: on)
pankso@13652 550 #sql_log_image on
pankso@13652 551
pankso@13652 552 # Log to the database when creating a snapshot image file (default: on)
pankso@13652 553 #sql_log_snapshot on
pankso@13652 554
pankso@13652 555 # Log to the database when creating motion triggered mpeg file (default: off)
pankso@13652 556 #sql_log_mpeg off
pankso@13652 557
pankso@13652 558 # Log to the database when creating timelapse mpeg file (default: off)
pankso@13652 559 #sql_log_timelapse off
pankso@13652 560
pankso@13652 561 # SQL query string that is sent to the database
pankso@13652 562 # Use same conversion specifiers has for text features
pankso@13652 563 # Additional special conversion specifiers are
pankso@13652 564 # %n = the number representing the file_type
pankso@13652 565 # %f = filename with full path
pankso@13652 566 # Default value:
pankso@13652 567 # insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
pankso@13652 568 #sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
pankso@13652 569
pankso@13652 570
pankso@13652 571 ############################################################
pankso@13652 572 # Database Options For MySQL
pankso@13652 573 ############################################################
pankso@13652 574
pankso@13652 575 # Mysql database to log to (default: not defined)
pankso@13652 576 ; mysql_db value
pankso@13652 577
pankso@13652 578 # The host on which the database is located (default: localhost)
pankso@13652 579 ; mysql_host value
pankso@13652 580
pankso@13652 581 # User account name for MySQL database (default: not defined)
pankso@13652 582 ; mysql_user value
pankso@13652 583
pankso@13652 584 # User password for MySQL database (default: not defined)
pankso@13652 585 ; mysql_password value
pankso@13652 586
pankso@13652 587
pankso@13652 588 ############################################################
pankso@13652 589 # Database Options For PostgreSQL
pankso@13652 590 ############################################################
pankso@13652 591
pankso@13652 592 # PostgreSQL database to log to (default: not defined)
pankso@13652 593 ; pgsql_db value
pankso@13652 594
pankso@13652 595 # The host on which the database is located (default: localhost)
pankso@13652 596 ; pgsql_host value
pankso@13652 597
pankso@13652 598 # User account name for PostgreSQL database (default: not defined)
pankso@13652 599 ; pgsql_user value
pankso@13652 600
pankso@13652 601 # User password for PostgreSQL database (default: not defined)
pankso@13652 602 ; pgsql_password value
pankso@13652 603
pankso@13652 604 # Port on which the PostgreSQL database is located (default: 5432)
pankso@13652 605 ; pgsql_port 5432
pankso@13652 606
pankso@13652 607
pankso@13652 608 ############################################################
pankso@13652 609 # Video Loopback Device (vloopback project)
pankso@13652 610 ############################################################
pankso@13652 611
pankso@13652 612 # Output images to a video4linux loopback device
pankso@13652 613 # The value '-' means next available (default: not defined)
pankso@13652 614 ; video_pipe value
pankso@13652 615
pankso@13652 616 # Output motion images to a video4linux loopback device
pankso@13652 617 # The value '-' means next available (default: not defined)
pankso@13652 618 ; motion_video_pipe value
pankso@13652 619
pankso@13652 620
pankso@13652 621 ##############################################################
pankso@13652 622 # Thread config files - One for each camera.
pankso@13652 623 # Except if only one camera - You only need this config file.
pankso@13652 624 # If you have more than one camera you MUST define one thread
pankso@13652 625 # config file for each camera in addition to this config file.
pankso@13652 626 ##############################################################
pankso@13652 627
pankso@13652 628 # Remember: If you have more than one camera you must have one
pankso@13652 629 # thread file for each camera. E.g. 2 cameras requires 3 files:
pankso@13652 630 # This motion.conf file AND thread1.conf and thread2.conf.
pankso@13652 631 # Only put the options that are unique to each camera in the
pankso@13652 632 # thread config files.
pankso@13652 633 ; thread /usr/local/etc/thread1.conf
pankso@13652 634 ; thread /usr/local/etc/thread2.conf
pankso@13652 635 ; thread /usr/local/etc/thread3.conf
pankso@13652 636 ; thread /usr/local/etc/thread4.conf
pankso@13652 637