wok annotate syslinux/stuff/iso2exe/taziso @ rev 20145

Rollback Timidity++
author Paul Issott <paul@slitaz.org>
date Sun Nov 12 09:57:44 2017 +0000 (2017-11-12)
parents 2547fda51451
children a686b7799fe9
rev   line source
pascal@17635 1 #!/bin/sh
pascal@17635 2
pascal@17635 3 [ $(id -u) -eq 0 ] || exec su -c "$0 $@"
pascal@17635 4
pascal@17635 5 DIALOG=dialog
pascal@17635 6
pascal@17635 7 ddq()
pascal@17635 8 {
pascal@17635 9 dd $@ 2> /dev/null
pascal@17635 10 }
pascal@17635 11
pascal@17635 12 get()
pascal@17635 13 {
pascal@18670 14 od -v -j $1 -N ${4:-${3:-2}} -t u${3:-2} -w${3:-2} -An "$2" 2>/dev/null ||
pascal@18670 15 hexdump -v -s $1 -n ${4:-${3:-2}} -e "\"\" 1/${3:-2} \" %d\n\"" "$2"
pascal@17635 16 }
pascal@17635 17
pascal@17635 18 bytes2bin()
pascal@17635 19 {
pascal@17635 20 for i in $@ ; do
pascal@17635 21 printf '\\\\x%02X' $(($i&255))
pascal@17635 22 done | xargs echo -en
pascal@17635 23 }
pascal@17635 24
pascal@17635 25 words2bin()
pascal@17635 26 {
pascal@17635 27 for i in $@ ; do
pascal@17635 28 printf '\\\\x%02X\\\\x%02X' $(($i&255)) $((($i>>8)&255))
pascal@17635 29 done | xargs echo -en
pascal@17635 30 }
pascal@17635 31
pascal@17635 32 gettazboot()
pascal@17635 33 {
pascal@17635 34 echo "Creating $(basename $1) ..."
pascal@18670 35 O=$(($(get 64 "$ISO") - 0xC0))
pascal@18670 36 L=$(($(get 20 "$ISO") - 0xC0 - $(get 24 "$ISO") - $O))
pascal@18140 37 S=$((32+$L))
pascal@18140 38 P=$((($S+511)/512))
pascal@18140 39 E=$((4096-(32*$P)))
pascal@18140 40 words2bin 0x5A4D $(($S%512)) $P 0 2 $E -1 $((${2:-0}-16)) \
pascal@18140 41 -2 0 256 -16 28 0x6C53 0x5469 0x7A61 > $1
pascal@18670 42 ddq bs=1 count=$L skip=$(echo $O) if="$ISO" >> $1
pascal@17635 43 }
pascal@17635 44
pascal@17635 45 uncpio()
pascal@17635 46 {
pascal@17635 47 [ -s "$1" ] || return
pascal@17635 48 echo -en "\n Extracting $(basename $1) ..."
pascal@17635 49 case $(get 0 $1) in
pascal@17635 50 *35615) ( zcat || gunzip ) ;;
pascal@17635 51 *14333) unxz ;;
pascal@17635 52 *\ 93) unlzma ;;
pascal@17635 53 *) cat ;;
pascal@17635 54 esac < $1 | ( cd ${2:-/} ; cpio -idmu > /dev/null 2>&1 )
pascal@17635 55 }
pascal@17635 56
pascal@17635 57 dotwait()
pascal@17635 58 {
pascal@17635 59 echo -n "${1:-Install filesystem}.."
pascal@17635 60 touch /tmp/wait
pascal@17930 61 [ "$REQUEST_URI" ] && return
pascal@17635 62 while [ -e /tmp/wait ]; do
pascal@17635 63 echo -n "." > /dev/tty
pascal@17635 64 sleep 1
pascal@17635 65 done &
pascal@17635 66 }
pascal@17635 67
pascal@17635 68 getuuid()
pascal@17635 69 {
pascal@17635 70 dev=$(mount | sed "/ $(echo $mnt | sed 's|/|\\/|g') /!d;s/ .*//;s|/dev/||;q")
pascal@17635 71 [ "$dev" ] &&
pascal@17635 72 blkid | sed "/$dev:/!d;s/.* UUID=.\\([^ ]*\\)\".*/\\1/" ||
pascal@17635 73 echo "/dev/hda1"
pascal@17635 74 }
pascal@17635 75
pascal@17635 76 tazusbinitfs()
pascal@17635 77 {
pascal@17635 78 PAD=$(($(stat -c %s $1) % 4))
pascal@17635 79 [ $PAD -ne 0 ] && ddq if=/dev/zero bs=1 count=$((4 - $PAD)) >> $1
pascal@17635 80 mkdir -p /tmp/fs$$/etc /tmp/fs$$/lib /tmp/fs$$/home
pascal@17635 81 cp -a /etc/locale.conf /tmp/fs$$/etc 2> /dev/null
pascal@17635 82 cp -a /etc/keymap.conf /tmp/fs$$/etc 2> /dev/null
pascal@17635 83 cat > /tmp/fs$$/init1 <<EOT
pascal@17635 84 #!/bin/sh
pascal@17635 85 sed -i 's|sbin/init|init2|' /init
pascal@17635 86 exec /init
pascal@17635 87 EOT
pascal@17635 88 cat > /tmp/fs$$/init2 <<EOT
pascal@17635 89 #!/bin/sh
pascal@17635 90
pascal@17635 91 mount -t proc /proc /proc
pascal@17635 92 for i in /lib/*.ko* ; do insmod \$i 2> /dev/null ; done; sleep 2
pascal@17635 93 v=\$(sed '/\\/home=/!d;s|.*/home=\\([^ ]*\\).*|\\1|' /proc/cmdline /cmdline 2> /dev/null)
pascal@17635 94 mount / -o remount,rw
pascal@17635 95 mkdir /mnt/dos
pascal@17635 96 rm -f /cmdline 2> /dev/null
pascal@17635 97 mount / -o remount,ro
pascal@17635 98 mnt=/mnt/dos/\${v#*/}
pascal@17635 99 dev=\$( (blkid /dev/[sh]d* || blkid) | grep \${v%%/*} | sed 's/:.*//;q')
pascal@17635 100 echo "Mount \$dev in /mnt/dos for \$v..." | tee -a /run/boot.log
pascal@17635 101 mount \$dev /mnt/dos
pascal@17635 102 if [ ! -d /mnt/dos/slitaz ]; then
pascal@17635 103 umount /mnt/dos 2> /dev/null
pascal@17635 104 (blkid /dev/[sh]d* || blkid) | while read dev line; do
pascal@17635 105 case "\$line" in
pascal@17635 106 *ntfs*|*vfat*|*msdos*) ;;
pascal@17635 107 *) continue ;;
pascal@17635 108 esac
pascal@17635 109 mount \${dev%:} /mnt/dos
pascal@17635 110 [ -d /mnt/dos/slitaz ] && break
pascal@17635 111 umount /mnt/dos
pascal@17635 112 done
pascal@17635 113 fi
pascal@17932 114 $([ "$2" ] || echo '# ')mount.posixovl -F \$mnt -- -oallow_other -odefault_permissions -osuid
pascal@17635 115 mount --bind \$mnt /home
pascal@17635 116 umount /proc
pascal@17635 117 exec /sbin/init
pascal@17635 118 EOT
pascal@17635 119 chmod 755 /tmp/fs$$/init?
pascal@17635 120 ( cd /tmp/fs$$ ; find * | cpio -o -H newc ) | gzip -9 >> $1
pascal@17635 121 rm -rf /tmp/fs$$
pascal@17635 122 }
pascal@17635 123
pascal@17635 124 mkinitrd()
pascal@17635 125 {
pascal@17635 126 echo -en "\nCreating $(basename $1) "
pascal@17635 127 fs=/tmp/fs$$
pascal@17635 128 for i in bin lib dev proc tmp mnt etc ; do
pascal@17635 129 mkdir -p $fs/$i
pascal@17635 130 done
pascal@17635 131 for i in /dev/console /dev/null /dev/tty /dev/tty0 /dev/tty1 /dev/tty2 \
pascal@17635 132 /dev/fuse /dev/hd* /dev/sd* ; do
pascal@17635 133 cp -a $2$i $fs/dev/
pascal@17635 134 done
pascal@17635 135 for i in /bin/busybox $(which mount.posixovl) $(which blkid); do
pascal@17635 136 cp $(LD_TRACE_LOADED_OBJECTS=1 /lib/ld*.so $i | \
pascal@17635 137 sed 's|.*=> \(.*/lib/l[^ ]*\).*|\1|;/^\//!d') $fs/lib
pascal@17635 138 cp $i $fs/bin
pascal@17635 139 done
pascal@17635 140 cp -a /lib/ld-* $fs/lib
pascal@17635 141 for i in $(busybox | sed '/Current/,$!d'); do
pascal@17635 142 [ -e $fs/bin/${i%,} ] || ln -s busybox $fs/bin/${i%,}
pascal@17635 143 done
pascal@17635 144 ln -s /proc/mounts $fs/etc/mtab
pascal@17635 145 sed 's/ .*//' /proc/modules | while read mod ; do
pascal@17635 146 find /lib/modules/ | grep $mod.ko | \
pascal@17635 147 sed 's|.*|cp & $fs/lib|' | sh
pascal@17635 148 done
pascal@17635 149 cat > $fs/init <<EOT
pascal@17635 150 #!/bin/sh
pascal@17635 151
pascal@17635 152 arg()
pascal@17635 153 {
pascal@17635 154 grep -q \$1 /proc/cmdline &&
pascal@17635 155 val="\$(sed "s/.*\$1=\\([^ ]*\\).*/\\1/" < /proc/cmdline)" &&
pascal@17635 156 echo "\$2 \$val"
pascal@17635 157 }
pascal@17635 158
pascal@17635 159 mount -t proc /proc /proc
pascal@17635 160 arg debug "shell" && debug=true && set -x
pascal@17635 161 for i in /lib/*.ko* ; do insmod \$i 2> /dev/null ; done; sleep 2
pascal@17635 162 arg mount "Mount device"
pascal@17635 163 mount \$( (blkid /dev/[sh]d* || blkid) | grep \$val | sed 's/:.*//;q') /mnt
pascal@17635 164 arg subroot "Change root to directory"
pascal@17635 165 if [ -d /mnt/\$val ]; then
pascal@17635 166 umount /mnt 2> /dev/null
pascal@17635 167 (blkid /dev/[sh]d* || blkid) | while read dev line; do
pascal@17635 168 case "\$line" in
pascal@17635 169 *ntfs*|*vfat*|*msdos*) ;;
pascal@17635 170 *) continue ;;
pascal@17635 171 esac
pascal@17635 172 mount \${dev%:} /mnt
pascal@17635 173 [ -d /mnt/\$val ] && break
pascal@17635 174 umount /mnt
pascal@17635 175 done
pascal@17635 176 fi
pascal@17932 177 $([ "$3" ] || echo '# ')mount.posixovl -F /mnt/\$val -- -oallow_other -odefault_permissions -osuid
pascal@17635 178 mount --bind /mnt /mnt/\$val/mnt/dos
pascal@17635 179 mount -o size=0 -t tmpfs tmpfs /mnt/\$val/mnt/dos/\$val
pascal@17635 180 LDSO=\$(ls /mnt/\$val/lib/ld-* | sed q)
pascal@17635 181 export LD_LIBRARY_PATH=\$val/lib:\$val/usr/lib:/lib
pascal@17635 182 [ "$debug" = "true" ] && sh
pascal@17635 183 umount /proc
pascal@17635 184 exec /bin/switch_root /mnt \${LDSO#/mnt/} \$val/usr/sbin/chroot \$val /sbin/init
pascal@17635 185 EOT
pascal@17635 186 chmod +x $fs/init
pascal@17635 187 ( cd $fs ; find * | cpio -o -H newc ) | lzma e $1 -si 2> /dev/null
pascal@17635 188 rm -rf $fs /tmp/wait
pascal@17635 189 }
pascal@17635 190
pascal@17635 191 ls_r()
pascal@17635 192 {
pascal@17635 193 ls -r $@ 2> /dev/null || ls $@
pascal@17635 194 }
pascal@17635 195
pascal@17635 196 doinstall()
pascal@17635 197 {
pascal@17932 198 unset useposixovl
pascal@17934 199 blkid | grep $(df $mnt | sed '$!d;s/ .*/:/') | \
pascal@17932 200 grep -qiE "(msdos|vfat|ntfs)" && useposixovl=YES
pascal@19029 201 case "$mnt" in
pascal@19029 202 *mkzip*) useposixovl=YES
pascal@19029 203 esac
pascal@17635 204 mkdir -p $mnt/slitaz/boot $mnt/slitaz/mnt/dos
pascal@17932 205 [ "$useposixovl" ] &&
pascal@17635 206 if ! mount.posixovl -F $mnt/slitaz -- \
pascal@17635 207 -oallow_other -odefault_permissions -osuid; then
pascal@17635 208 echo "Can't install SliTaz. Abort."
pascal@17635 209 sleep 5
pascal@17635 210 return 1
pascal@17635 211 fi
pascal@17635 212 dotwait "Install root filesystem in /slitaz.."
pascal@17635 213 if [ "$1" ]; then
pascal@18240 214 ls_r $media/boot/rootfs*gz | \
pascal@17635 215 xargs cat > $mnt/slitaz/boot/rootfs.gz
pascal@17932 216 tazusbinitfs $mnt/slitaz/boot/rootfs.gz $useposixovl
pascal@17635 217 initrd=rootfs.gz
pascal@17635 218 extraargs="/home=$(getuuid)/slitaz rdinit=/init1"
pascal@17635 219 else
pascal@18240 220 for i in $(ls_r $media/boot/rootfs*gz); do
pascal@17635 221 uncpio $i $mnt/slitaz
pascal@17635 222 done
pascal@17635 223 for i in $packages_list; do
pascal@17635 224 tazpkg get-install $i --root=$mnt/slitaz
pascal@17635 225 done
pascal@17635 226 for i in $packages_dir/*.tazpkg; do
pascal@17635 227 [ -s "$i" ] &&
pascal@17635 228 tazpkg install $i --root=$mnt/slitaz
pascal@17635 229 done
pascal@17635 230 cp -a /etc/locale.conf $mnt/slitaz/etc 2> /dev/null
pascal@17635 231 cp -a /etc/keymap.conf $mnt/slitaz/etc 2> /dev/null
pascal@17932 232 mkinitrd $mnt/slitaz/boot/initrd $mnt/slitaz $useposixovl
pascal@17635 233 initrd=initrd
pascal@17635 234 extraargs="mount=$(getuuid) subroot=slitaz"
pascal@17635 235 fi
pascal@17635 236 echo -en "\nInstall boot files..."
pascal@18240 237 for i in $media/boot/bzImage $media/boot/*pxe* \
pascal@18240 238 $media/boot/isolinux/he* $media/boot/isolinux/opt* \
pascal@18240 239 $media/README $media/boot/memtest* ; do
pascal@17635 240 [ -s $i ] && cp $i $mnt/slitaz/boot
pascal@17635 241 done
pascal@17635 242 for i in $mnt/slitaz/boot/memtest $mnt/slitaz/boot/*pxe* ; do
pascal@17635 243 [ $(get 0 $i 2> /dev/null || echo 0) -eq 23117 ] &&
pascal@17635 244 mv $i $i.exe
pascal@17635 245 done
pascal@17635 246 gettazboot $mnt/slitaz/boot/tazboot.exe
pascal@17635 247 unix2dos > $mnt/slitaz/boot/tazboot.cmd <<EOT
pascal@17635 248 kernel=/slitaz/boot/bzimage
pascal@17635 249 initrd=/slitaz/boot/$initrd
pascal@17635 250 rw root=/dev/null $extraargs autologin
pascal@17635 251 EOT
pascal@17635 252 unix2dos $mnt/slitaz/boot/he* $mnt/slitaz/boot/opt* \
pascal@17635 253 $mnt/slitaz/boot/README
pascal@17635 254 [ -d $mnt/slitaz/usr/sbin -a ! -x $mnt/slitaz/usr/sbin/mount.posixovl ] &&
pascal@17635 255 cp $(which mount.posixovl) $mnt/slitaz/usr/sbin
pascal@19033 256 if [ "$useposixovl" ] && grep -qs " $mnt " /proc/mounts &&
pascal@17932 257 [ ! -d $mnt/boot/grub ]; then
pascal@17929 258 mkdir -p $mnt/boot/grub
pascal@17930 259 echo -en "\nInstall grub in /boot/grub..."
pascal@17929 260 cp -a /usr/lib/grub/*/* $mnt/boot/grub
pascal@17929 261 cat > $mnt/boot/grub/menu.lst <<EOT
pascal@17929 262 # /boot/grub/menu.lst: GRUB boot loader configuration.
pascal@17929 263
pascal@17929 264 # By default, boot the first entry.
pascal@17929 265 default 0
pascal@17929 266
pascal@17929 267 # Boot automatically after 8 secs.
pascal@17929 268 timeout 8
pascal@17929 269
pascal@17929 270 title Microsoft Windows
pascal@17929 271 chainloader +1
pascal@17929 272
pascal@17929 273 EOT
pascal@17929 274 dev=$(grep " $mnt " /proc/mounts | awk '{ print $1 }')
pascal@17929 275 base=${dev//[0-9]/}
pascal@17929 276 dd if=$base bs=32k count=1 of=$mnt/boot/grub/$(basename $base)
pascal@17929 277 cat > $mnt/boot/grub/uninstall-grub.sh <<EOT
pascal@17929 278 #!/bin/sh
pascal@17929 279
pascal@17929 280 [ -s /boot/grub/$(basename $base) ] &&
pascal@17929 281 dd if=/boot/grub/$(basename $base) of=$base
pascal@17929 282 EOT
pascal@17929 283 grub-install --no-floppy --root-directory=$mnt $base
pascal@17929 284 fi
pascal@17932 285 if [ -s $mnt/boot/grub/menu.lst ] &&
pascal@17932 286 ! grep -q /slitaz/boot/bzimage $mnt/boot/grub/menu.lst; then
pascal@17932 287 echo -en "\nUpdate /boot/grub/menu/lst..."
pascal@17932 288 cat >> $mnt/boot/grub/menu.lst <<EOT
pascal@17932 289 title SliTaz GNU/Linux $(cat $mnt/slitaz/etc/slitaz-release)
pascal@17932 290 kernel /slitaz/boot/bzimage rw root=/dev/null $extraargs autologin
pascal@17932 291 initrd /slitaz/boot/$initrd
pascal@17932 292
pascal@17932 293 EOT
pascal@17932 294 fi
pascal@17635 295 rm -f /tmp/wait
pascal@17932 296 [ "$useposixovl" ] && umount $mnt/slitaz
pascal@17635 297 return 0
pascal@17635 298 }
pascal@17635 299
pascal@17635 300 windev()
pascal@17635 301 {
pascal@17924 302 if [ -b "$1" ]; then
pascal@17924 303 device=$1
pascal@17928 304 elif [ "$1" ]; then
pascal@17932 305 echo "Invalid Linux/Windows partition"
pascal@17928 306 return 1
pascal@17924 307 else
pascal@17932 308 DEV="$(blkid | grep -iE "(msdos|vfat|ntfs|ext[234]|xfs|btrfs)" | sed 's/:.*//;s|/dev/||')"
pascal@17924 309 [ "$DEV" ] || return
pascal@17635 310 cat > /tmp/dialog$$ <<EOT
pascal@17635 311 $DIALOG --clear \
pascal@17932 312 --title " Select your Linux/Windows partition " \
pascal@17932 313 --menu "\nPlease select the Linux/Windows partition according to its known size.
paul@17671 314 The data will be kept untouched.\n" \
pascal@17635 315 17 70 8 \
pascal@17635 316 $(for i in $DEV ; do
pascal@17635 317 label="$(blkid | sed "/$i:/!d;s/.*://;s/[^ ]*UUID=[^ ]* //g;s/LABEL=//")"
pascal@17635 318 echo -n "/dev/$i \"$(($(cat /sys/block/*/$i/size)/2048))MB $label\" "
pascal@17635 319 done)
pascal@17635 320 EOT
pascal@17924 321 exec 3>&1
pascal@17924 322 [ $? -eq 0 ] || return
pascal@17924 323 device=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17924 324 exec 3>&-
pascal@17924 325 rm -f /tmp/dialog$$
pascal@17924 326 fi
pascal@17635 327 mnt=/tmp/mnt$$
pascal@17635 328 mkdir -p $mnt && mount $device $mnt
pascal@17635 329 }
pascal@17635 330
pascal@17635 331 extra_packages()
pascal@17635 332 {
pascal@17635 333 packages_list=
pascal@17635 334 packages_dir=
pascal@17635 335 $DIALOG --clear \
pascal@17635 336 --title " Extra packages " \
pascal@17635 337 --defaultno --yesno \
pascal@17635 338 "
pascal@17635 339 Do you want to add extra packages ?
pascal@17635 340 " 7 70
pascal@17635 341 [ $? -eq 0 ] || return
pascal@17635 342 [ -s /var/lib/tazpkg/packages.txt ] || tazpkg recharge
pascal@18240 343 if [ -s $media/boot/vmlinuz-$(uname -r) ]; then
pascal@17635 344 cat > /tmp/dialog$$ <<EOT
pascal@17635 345 $DIALOG --clear \
pascal@17635 346 --title " Select the packages " \
pascal@17635 347 --separate-output \
pascal@17635 348 --cancel-label "Skip" \
pascal@17635 349 --checklist "Please select the packages you want to install. Try with the first letter." \
pascal@18240 350 0 0 0 \\
pascal@17635 351 EOT
pascal@17635 352 awk -F\| '{ printf "%s \"%s\" off ",$1,$3 }' \
pascal@17635 353 /var/lib/tazpkg/packages.desc >> /tmp/dialog$$
pascal@17635 354 sh /tmp/dialog$$ 2> /tmp/dialog.out$$
pascal@17635 355 [ $? -eq 0 ] && packages_list="$(cat /tmp/dialog.out$$)"
pascal@17635 356 fi
pascal@17635 357 cat > /tmp/dialog$$ <<EOT
pascal@17635 358 $DIALOG --clear \
paul@17671 359 --title "Please select the directory with every custom package to install." \
pascal@17635 360 --cancel-label "Skip" \
pascal@17635 361 --dselect $PWD 13 78
pascal@17635 362 EOT
pascal@17635 363 sh /tmp/dialog$$ 2> /tmp/dialog.out$$
pascal@17635 364 [ $? -eq 0 ] && packages_dir="$(cat /tmp/dialog.out$$)"
pascal@17635 365 rm -f /tmp/dialog$$ /tmp/dialog.out$$
pascal@17635 366 }
pascal@17635 367
pascal@17635 368 _install()
pascal@17635 369 {
pascal@17635 370 extra_packages
pascal@17635 371 $DIALOG --clear \
pascal@17635 372 --title " SliTaz UMSDOS way installation " \
pascal@17635 373 --yes-label "Install" --yesno \
pascal@17635 374 "\nSliTaz will be installed in the subdirectory \\slitaz of the current
paul@17935 375 Linux/DOS/Windows partition. You can see your files from /mnt/dos.\n\n
pascal@17635 376 You can start SliTaz with \\slitaz\\boot\\tazboot.exe\n\n
pascal@17635 377 To uninstall SliTaz, you have only to remove this directory.
pascal@17635 378 The file \\boot.ini or \\config.sys may be modified too.\n\n
paul@19451 379 SliTaz may run slowly on the 'UMSDOS way' installation due to the
pascal@17635 380 posixovl filesystem. The 'TAZUSB way' installation runs faster.\n\n
pascal@17635 381 To do a traditional installation with disk partitioning,
paul@19451 382 start SliTaz Live with the 'SliTaz RAM boot' menu.\n
pascal@17635 383 " 19 70
pascal@17635 384 [ $? -eq 0 ] || return
pascal@17635 385 doinstall
pascal@17635 386 }
pascal@17635 387
pascal@17635 388 readtazbootconf()
pascal@17635 389 {
pascal@17635 390 kernel="$(sed '/^kernel=/!d;s/.*=//' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 391 initrd="$(sed '/^initrd=/!d;s/.*=//' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 392 cmdline="$(sed '/^kernel=/d;/^initrd=/d' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 393 }
pascal@17635 394
pascal@17635 395 bootinstalled()
pascal@17635 396 {
pascal@17635 397 [ "$(which kexec)" ] || return
pascal@17635 398 [ -x $mnt/slitaz$1 ] || return
pascal@17635 399 [ -s $mnt/slitaz/boot/tazboot.cmd ] || return
pascal@17635 400 readtazbootconf
pascal@17659 401 kexec -l $kernel --initrd $initrd --command-line "$cmdline" || return
pascal@17635 402 umount $mnt
pascal@17635 403 rm -rf $mnt
pascal@18240 404 quit "kexec -e"
pascal@17635 405 }
pascal@17635 406
pascal@17635 407 mkzip()
pascal@17635 408 {
pascal@17635 409 device=
pascal@17635 410 packages_list=
pascal@17635 411 packages_dir=
pascal@19029 412 mnt=/tmp/mkzipmnt$$
pascal@17635 413 mkdir -p $mnt
pascal@17930 414 $1 $2 || return
pascal@18140 415 for i in bootlace.com grubinst.exe grldr ; do
pascal@18140 416 wget -O $mnt/slitaz/boot/$i http://mirror.slitaz.org/boot/$i
pascal@18140 417 done
pascal@17635 418 readtazbootconf
pascal@17636 419 cat > $mnt/slitaz/boot/menu.lst <<EOT
pascal@17635 420 title SliTaz
pascal@17635 421 kernel $kernel $cmdline
pascal@17635 422 initrd $initrd
pascal@17635 423
pascal@17635 424 EOT
pascal@17635 425 while read file title; do
pascal@17637 426 file=$(ls $mnt/slitaz/boot/*$file* 2> /dev/null)
pascal@17637 427 [ -s "$file" ] && cat >> $mnt/slitaz/boot/menu.lst <<EOT
pascal@17635 428 title $title
pascal@17637 429 kernel ${file#$mnt}
pascal@17635 430
pascal@17635 431 EOT
pascal@17635 432 done <<EOT
pascal@17635 433 memtest MemTest
pascal@17635 434 pxe Web boot
pascal@17635 435 EOT
pascal@17636 436 unix2dos $mnt/slitaz/boot/menu.lst
pascal@17636 437 unix2dos > $mnt/slitaz/boot/install.txt <<EOT
pascal@17659 438 For DOS users (real mode only):
pascal@17659 439
pascal@17659 440 Start SliTaz with \\slitaz\\boot\\tazboot.exe
pascal@17659 441
pascal@17659 442
pascal@17635 443 For NT/2000/XP users:
pascal@17635 444
pascal@17635 445 1- Move the files grldr and menu.lst into the root directory
pascal@17635 446
pascal@17635 447 C:\\> copy \\slitaz\\boot\\grldr \\
pascal@17635 448 C:\\> copy \\slitaz\\boot\\menu.lst \\
pascal@17635 449
pascal@17635 450 2- Remove boot.ini attributes
pascal@17635 451
pascal@17635 452 C:\\> attrib -r -h -s boot.ini
pascal@17635 453
pascal@17635 454 3- Append the following line to boot.init
pascal@17635 455
pascal@17635 456 C:\\grldr="slitaz"
pascal@17635 457
pascal@17635 458 4- Restore boot.ini attributes
pascal@17635 459
pascal@17635 460 C:\\> attrib +r +h +s boot.ini
pascal@17635 461
pascal@17635 462 See http://diddy.boot-land.net/grub4dos/files/README_GRUB4DOS.txt
pascal@18140 463 and http://xpt.sourceforge.net/techdocs/nix/disk/boot/boot07-GrubForDosInfo/ar01s03.html
pascal@17635 464 EOT
pascal@18140 465 ( cd $mnt ; echo 'See \slitaz\boot\install.txt to launch SliTaz.' | \
pascal@18670 466 zip -zr9 $(basename "$ISO" .iso).zip slitaz )
pascal@19033 467 [ "$(which advzip)" ] &&
pascal@19033 468 echo "Recompressing $(basename "$ISO" .iso).zip ..." &&
pascal@19033 469 advzip -z4 $mnt/*.zip
pascal@17635 470 mv $mnt/*.zip .
pascal@19029 471 du -h $PWD/$(basename "$ISO" .iso).zip
pascal@17636 472 umount $mnt
pascal@17636 473 rm -rf $mnt
pascal@17635 474 }
pascal@17635 475
pascal@17635 476 install()
pascal@17635 477 {
pascal@17924 478 windev $1 || return
pascal@17635 479 packages_list=
pascal@17635 480 packages_dir=
pascal@17924 481 if [ "$1" ]; then
pascal@17924 482 doinstall
pascal@17924 483 else
pascal@17924 484 _install && bootinstalled /sbin/init
pascal@17924 485 fi
pascal@17635 486 umount $mnt
pascal@17635 487 rm -rf $mnt
pascal@17635 488 }
pascal@17635 489
pascal@17635 490 inst2zip()
pascal@17635 491 {
pascal@17924 492 if [ "$1" ]; then
pascal@17930 493 mkzip doinstall
pascal@17924 494 else
pascal@17924 495 mkzip _install
pascal@17924 496 fi
pascal@17635 497 }
pascal@17635 498
pascal@17635 499 _installtaz()
pascal@17635 500 {
pascal@17635 501 $DIALOG --clear \
pascal@17635 502 --title " SliTaz TAZUSB way installation " \
pascal@17635 503 --yes-label "Install" --yesno \
pascal@17635 504 "\nSliTaz will be installed in the subdirectory \\slitaz of the current
paul@17935 505 Linux/DOS/Windows partition. You can see your files from /mnt/dos.\n\n
pascal@17635 506 You can start SliTaz with \\slitaz\\boot\\tazboot.exe\n\n
pascal@17635 507 To uninstall SliTaz, you have only to remove this directory.
pascal@17635 508 The file \\boot.ini or \\config.sys may be modified too.\n\n
pascal@17635 509 The filesystem is loaded entirely into memory upon boot to
paul@19451 510 increase responsiveness. Only /home lands on the hard disk.\n\n
pascal@17635 511 To do a traditional installation with disk partitioning,
paul@19451 512 start SliTaz Live with the 'SliTaz RAM boot' menu.\n
pascal@17635 513 " 19 70
pascal@17635 514 [ $? -eq 0 ] || return
pascal@17635 515 doinstall tazusblike
pascal@17635 516 }
pascal@17635 517
pascal@17635 518 installtaz()
pascal@17635 519 {
pascal@17924 520 windev $1 || return
pascal@17635 521 packages_list=
pascal@17635 522 packages_dir=
pascal@17924 523 if [ "$1" ]; then
pascal@17924 524 doinstall tazusblike
pascal@17924 525 else
pascal@17924 526 _installtaz && bootinstalled /boot/bzimage
pascal@17924 527 fi
pascal@17635 528 umount $mnt
pascal@17635 529 rm -rf $mnt
pascal@17635 530 }
pascal@17635 531
pascal@17635 532 insttaz2zip()
pascal@17635 533 {
pascal@17924 534 if [ "$1" ]; then
pascal@17930 535 mkzip doinstall tazusblike
pascal@17924 536 else
pascal@17924 537 mkzip _installtaz
pascal@17924 538 fi
pascal@17635 539 }
pascal@17635 540
pascal@17635 541 bootiso()
pascal@17635 542 {
pascal@18799 543 cd /tmp
pascal@18240 544 for i in $(ls_r $media/boot/rootfs*gz); do
pascal@17635 545 grep -q ' lm ' /proc/cpuinfo && [ -s ${i}64 ] && i=${i}64
pascal@17635 546 cat $i
pascal@17635 547 n=$((4 - ($(stat -c %s $i) % 4)))
pascal@17635 548 [ $n -eq 4 ] || dd if=/dev/zero bs=1 count=$n
pascal@18799 549 done > initrd$$
pascal@18799 550 cmdline="root=/dev/null autologin lang=$LANG"
pascal@18799 551 [ -s /etc/keymap.conf ] && cmdline="$cmdline kmap=$(cat /etc/keymap.conf)"
pascal@18799 552 [ -s /etc/TZ ] && cmdline="$cmdline tz=$(cat /etc/TZ)"
pascal@18799 553 rm -f cmdline initrd 2> /dev/null
pascal@18799 554 getcustomconf kexec >/dev/null
pascal@18799 555 [ -s cmdline ] && cmdline="$cmdline $(cat cmdline)" && rm cmdline
pascal@18799 556 [ -s initrd ] && cat initrd >> initrd$$ && rm initrd
pascal@18240 557 kernel=$media/boot/bzImage
pascal@17635 558 grep -q ' lm ' /proc/cpuinfo && [ -s ${kernel}64 ] && kernel=${kernel}64
pascal@17635 559 . /etc/locale.conf
pascal@18799 560 kexec -l $kernel --initrd initrd$$ --command-line "$cmdline" &&
pascal@18799 561 rm -f initrd$$
pascal@18240 562 quit "kexec -e"
pascal@17635 563 }
pascal@17635 564
pascal@17635 565 tazboot()
pascal@17635 566 {
pascal@17928 567 if [ -z "$1" ]; then
pascal@17928 568 $DIALOG --clear \
pascal@17928 569 --title " SliTaz bootloader for DOS " \
pascal@17928 570 --yes-label "Install" --yesno \
pascal@17635 571 "\nThe file TAZBOOT.EXE will be created in the top directory. It supports
pascal@17635 572 any linux kernel, multiple initramfs, a kernel command line and
pascal@17635 573 an ISO image file loopback (retrieves files from an ISO file).\n\n
pascal@17635 574 Usage: tazboot.exe [[@commands]|[kernel=<bzimage>]
pascal@17635 575 [initrd=<rootfs>[,<rootfs2>...]] [bootfrom=<isofile>] cmdline args ...]\n\n
pascal@17635 576 Defaults: tazboot @tazboot.cmd or tazboot kernel=bzImage auto\n\n\
pascal@17635 577 Examples for tazboot.cmd:\n\n\
pascal@17635 578 bootfrom=\\isos\\slitaz-4.0.iso\n\
pascal@17635 579 kernel=boot/bzImage\n\
pascal@17635 580 initrd=boot/rootfs4.gz,boot/rootfs3.gz,boot/rootfs2.gz,boot/rootfs1.gz\n\
pascal@17635 581 rw root=/dev/null autologin\n\n\
pascal@17635 582 kernel=\\slitaz\\vmlinuz root=/dev/sda5 ro\n\n
pascal@17635 583 Unlike GRUB4DOS, it doesn't require unfragmented ISO image files.\n
pascal@18240 584 " 0 0
pascal@17928 585 [ $? -eq 0 ] || return
pascal@17928 586 fi
pascal@17635 587 gettazboot tazboot.exe
pascal@19029 588 du -h $PWD/tazboot.exe
pascal@17635 589 }
pascal@17635 590
pascal@17635 591 md5()
pascal@17635 592 {
pascal@17635 593 dotwait "Checking files"
pascal@19432 594 ( cd $media ; ${md5sum:-md5sum -c md5sum*} 2>&1 | sort ) > /tmp/data
pascal@17928 595 unset md5sum
pascal@17635 596 rm -f /tmp/wait
pascal@17928 597 if [ "$1" ]; then
pascal@17924 598 cat /tmp/data
pascal@17924 599 else
pascal@17924 600 $DIALOG --clear \
pascal@17924 601 --title " Checked files " \
pascal@18240 602 --textbox /tmp/data 0 0
pascal@17924 603 fi
pascal@17635 604 rm -f /tmp/data
pascal@17635 605 }
pascal@17635 606
pascal@17635 607 gotcdfile()
pascal@17635 608 {
pascal@18240 609 for i in "$media/$1" "$media/*/$1" "$media/*/isolinux/$1" ; do
pascal@17635 610 file=$(ls $i 2> /dev/null | sed q)
pascal@17635 611 [ -s "$file" ] && break
pascal@17635 612 done
pascal@17635 613 }
pascal@17635 614
pascal@17635 615 sha()
pascal@17635 616 {
pascal@17635 617 gotcdfile 'sha*sum*'
pascal@17635 618 sha=$(basename $file)
pascal@18240 619 md5sum="${sha%sum*}sum -c ${file#$media/}"
pascal@17928 620 md5 $@
pascal@17635 621 }
pascal@17635 622
pascal@17635 623 readme()
pascal@17635 624 {
pascal@17635 625 gotcdfile 'README*'
pascal@17924 626 if [ "$1" ]; then
pascal@17924 627 cat $file
pascal@17924 628 else
pascal@17924 629 $DIALOG --clear \
pascal@17924 630 --title " Readme " \
pascal@18240 631 --textbox $file 0 0
pascal@17924 632 fi
pascal@17635 633 }
pascal@17635 634
pascal@17635 635 bzimage()
pascal@17635 636 {
pascal@17928 637 if [ -z "$1" ]; then
pascal@17924 638 $DIALOG --clear \
pascal@17924 639 --title " Create linux.exe ? " \
pascal@17924 640 --yes-label "Install" --yesno \
pascal@17635 641 "\nLinux.exe launches the linux kernel under DOS (in real mode only).
pascal@17635 642 The cmdline arguments are supported except initrd=,
pascal@17635 643 vga= (you can try 'rdev -v') and mem= (partially).
pascal@17635 644 \nExample:\nC:\\> linux.exe root=/dev/hda2 ro panic=60\n
pascal@17635 645 " 12 70
pascal@17924 646 [ $? -eq 0 ] || return
pascal@17924 647 fi
pascal@18240 648 cp $media/boot/bzImage linux.exe
pascal@19029 649 du -h $PWD/linux.exe
pascal@17635 650 }
pascal@17635 651
pascal@17635 652 memtest()
pascal@17635 653 {
pascal@17924 654 if [ -z "$1" ]; then
pascal@17924 655 $DIALOG --clear \
pascal@17924 656 --title " Create memtest.exe ? " \
pascal@17924 657 --yes-label "Install" --yesno \
pascal@17635 658 "\nMemtest86 is a thorough, stand alone memory test for x86 architecture
pascal@17635 659 computers. BIOS based memory tests are a quick, cursory check and often
pascal@17635 660 miss many of the failures that are detected by Memtest86.\n
pascal@18240 661 " 0 0
pascal@17924 662 [ $? -eq 0 ] || return
pascal@17924 663 fi
pascal@17924 664 gotcdfile 'memtest*' && cp $file memtest.exe
pascal@19029 665 du -h $PWD/memtest.exe
pascal@17635 666 }
pascal@17635 667
pascal@17635 668 mkfat12()
pascal@17635 669 {
pascal@17635 670 [ $(($(get 0 $1) - 0x5A4D)) -eq 0 ] || return
pascal@17635 671 J=$(($(get 3 $1 1) + 0x02))
pascal@17635 672 R=$((1 + $(get 497 $1 1) + 1 + ($(get 500 $1)-1)/32))
pascal@17635 673 [ $R -lt 2500 ] || return
pascal@17635 674 [ $((($(get 500 $1)-1) & 31)) -lt 30 ] &&
pascal@17635 675 ddq if=$file bs=32 count=1 seek=$(($R*16 - 1)) of=/dev/fd0
pascal@17635 676 G="18 0 2 0 0 0 0 0"
pascal@17635 677 [ $J -gt 25 ] || G=""
pascal@17635 678 F=0
pascal@17635 679 for i in 1 2 3; do
pascal@17635 680 F=$((((2880-$R-$F-$F)*3+1023)/1024))
pascal@17635 681 done
pascal@17635 682 bytes2bin 0xEB $J 0x90 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 \
pascal@17635 683 0 2 2 $(($R%256)) $(($R/256)) 2 64 0 64 11 0xF0 $F 0 \
pascal@17635 684 $G | ddq bs=1 of=/dev/fd0
pascal@17635 685 ddq if=/dev/zero bs=512 count=$((4+$F+$F)) seek=$R of=/dev/fd0
pascal@17635 686 for i in $R $(($R+$F)) ; do
pascal@17635 687 bytes2bin 0xF0 0xFF 0xFF | ddq bs=512 seek=$i of=/dev/fd0
pascal@17635 688 done
pascal@17635 689 echo -n $(basename $1) | ddq bs=1 seek=3 count=8 of=/dev/fd0
pascal@17635 690 }
pascal@17635 691
pascal@17635 692 mkfloppy()
pascal@17635 693 {
pascal@17635 694 dotwait "Create a $(basename $1) boot floppy"
pascal@17635 695 ddq if=$1 of=/dev/fd0
pascal@17635 696 mkfat12 $1
pascal@17635 697 rm -f /tmp/wait
pascal@17635 698 }
pascal@17635 699
pascal@17635 700 fdmemtest()
pascal@17635 701 {
pascal@17924 702 if [ -z "$1" ]; then
pascal@17924 703 $DIALOG --clear \
pascal@17924 704 --title " Create a Memtest86 boot floppy " \
pascal@17924 705 --yes-label "Create floppy" --yesno \
pascal@17635 706 "\nMemtest86 is a thorough, stand alone memory test for x86 architecture
pascal@17635 707 computers. BIOS based memory tests are a quick, cursory check and often
pascal@17635 708 miss many of the failures that are detected by Memtest86.\n\n
pascal@17635 709 Please insert a blank disk in floppy drive.\n
pascal@18240 710 " 0 0
pascal@17924 711 [ $? -eq 0 ] || return
pascal@17924 712 fi
pascal@17924 713 gotcdfile 'memtest*' && mkfloppy $file
pascal@17635 714 }
pascal@17635 715
pascal@17635 716 pxe()
pascal@17635 717 {
pascal@17635 718 gotcdfile '?pxe'
pascal@17928 719 if [ -z "$1" ]; then
pascal@17928 720 $DIALOG --clear \
pascal@17928 721 --title " Create $(basename $file).exe ? " \
pascal@17928 722 --yes-label "Install" --yesno \
pascal@17635 723 "\nBoot your operating system from the internet and enjoy a full system
pascal@17635 724 working entirely in RAM with speed and stability in mind. The Linux Kernel
pascal@17635 725 and the complete SliTaz compressed root filesystem will be loaded into RAM
pascal@17635 726 from the Web using PXE and HTTP protocols.\n
pascal@18240 727 " 0 0
pascal@17928 728 [ $? -eq 0 ] || return
pascal@17928 729 fi
pascal@17635 730 cp $file $(basename $file).exe
pascal@19029 731 du -h $PWD/$(basename $file).exe
pascal@17635 732 }
pascal@17635 733
pascal@17635 734 fdpxe()
pascal@17635 735 {
pascal@17924 736 if [ -z "$1" ]; then
pascal@17924 737 $DIALOG --clear \
pascal@17924 738 --title " Create a SliTaz Web boot floppy " \
pascal@17924 739 --yes-label "Create floppy" --yesno \
pascal@17635 740 "\nBoot your operating system from the internet and enjoy a full system
pascal@17635 741 working entirely in RAM with speed and stability in mind. The Linux Kernel
pascal@17635 742 and the complete SliTaz compressed root filesystem will be loaded into RAM
pascal@17635 743 from the Web using PXE and HTTP protocols.\n\n
pascal@17635 744 Please insert a blank disk in floppy drive.\n
pascal@18240 745 " 0 0
pascal@17924 746 [ $? -eq 0 ] || return
pascal@17924 747 fi
pascal@17924 748 gotcdfile '?pxe' && mkfloppy $file
pascal@17924 749 }
pascal@17924 750
pascal@17924 751 menuitem()
pascal@17924 752 {
pascal@17924 753 [ "$3" ] && shift
pascal@17924 754 echo -en "\"$1\" \"$2\""
pascal@17635 755 }
pascal@17635 756
pascal@17635 757 gotposixovl()
pascal@17635 758 {
pascal@19425 759 mount.posixovl 2>&1 | grep -qi usage && gotcdfile 'rootfs*.gz' &&
pascal@19425 760 menuitem "$@"
pascal@17635 761 }
pascal@17635 762
pascal@17635 763 gotposixovlzip()
pascal@17635 764 {
pascal@17635 765 [ "$(which zip)" ] && gotposixovl "$1" "$2"
pascal@17635 766 }
pascal@17635 767
pascal@17635 768 xfile()
pascal@17635 769 {
pascal@17924 770 [ "$(which $1)" ] && menuitem "$@"
pascal@17635 771 }
pascal@17635 772
pascal@17635 773 cdfile()
pascal@17635 774 {
pascal@17924 775 gotcdfile "$1" && menuitem "$@"
pascal@17635 776 }
pascal@17635 777
pascal@19425 778 gottazusb()
pascal@19425 779 {
pascal@19425 780 gotcdfile 'rootfs*.gz' && xfile tazusb "$@"
pascal@19425 781 }
pascal@19425 782
pascal@17659 783 isbzImage()
pascal@17659 784 {
pascal@17659 785 [ $(get 514 $file 4) -eq 1400005704 ] &&
pascal@17659 786 [ $(($(get 529 $file 1) & 1)) -eq 1 ]
pascal@17659 787 }
pascal@17659 788
pascal@17635 789 cdfilex()
pascal@17635 790 {
pascal@17924 791 gotcdfile "$1" && [ "$(which kexec)" ] && isbzImage && menuitem "$@"
pascal@17635 792 }
pascal@17635 793
pascal@17635 794 cdfilef()
pascal@17635 795 {
pascal@17635 796 [ -e /sys/block/fd0 ] && cdfile "$@"
pascal@17635 797 }
pascal@17635 798
pascal@17635 799 cdexe()
pascal@17635 800 {
pascal@17635 801 gotcdfile "$1" &&
pascal@17635 802 [ $(get 0 $file 2>/dev/null || echo 0) -eq 23117 ] &&
pascal@17924 803 menuitem "$@"
pascal@17635 804 }
pascal@17635 805
pascal@17635 806 misspkg()
pascal@17635 807 {
pascal@19029 808 for i in zip kexec-tools posixovl cdrkit cdrkit-isoinfo ; do
pascal@17635 809 [ -d /var/lib/tazpkg/installed/$i/ ] && continue
pascal@17924 810 [ "$1" != "install" ] && menuitem "$@" && return
pascal@17635 811 tazpkg get-install $i
pascal@17635 812 done
pascal@17635 813 }
pascal@17635 814
pascal@17635 815 missing()
pascal@17635 816 {
pascal@17635 817 misspkg install
pascal@17635 818 }
pascal@17635 819
pascal@17635 820 ishybrid()
pascal@17635 821 {
pascal@18670 822 [ $(get 510 "$ISO") -eq 43605 ] || return
pascal@18670 823 C=$((2048*$(get $(((17*2048) + 71)) "$ISO" 4)))
pascal@18670 824 [ $(get $C "$ISO" 4) -eq 1 ] || return
pascal@18670 825 [ $(get $(($C+30)) "$ISO" 4) -eq $((0x88AA55)) ] || return
pascal@18670 826 C=$((2048*$(get $(($C+40)) "$ISO" 4)))
pascal@18670 827 [ $(get $(($C+64)) "$ISO" 4) -eq 1886961915 ] && menuitem "$@"
pascal@17635 828 }
pascal@17635 829
pascal@17635 830 isiso()
pascal@17635 831 {
pascal@18670 832 [ $(get 32769 "$ISO" 4) -eq 808469571 ] && menuitem "$@"
pascal@18140 833 }
pascal@18140 834
pascal@18140 835 hastazboot()
pascal@18140 836 {
pascal@18670 837 [ $(get 0 "$ISO") -eq 23117 ] && menuitem "$@"
pascal@18034 838 }
pascal@18034 839
pascal@18034 840 burnable()
pascal@18034 841 {
pascal@19510 842 [ "$(sed '/Can wr.*1$/!d' /proc/sys/dev/cdrom/info 2> /dev/null)" ] &&
pascal@19510 843 menuitem "$@"
pascal@18034 844 }
pascal@18034 845
pascal@18034 846 blankable()
pascal@18034 847 {
pascal@19510 848 [ "$(sed '/Can wr.*RW.*1$/!d' /proc/sys/dev/cdrom/info 2> /dev/null)" ] &&
pascal@19510 849 menuitem "$@"
pascal@18034 850 }
pascal@18034 851
pascal@18034 852 burniso()
pascal@18034 853 {
pascal@18034 854 wodim -v speed=$(fgrep "drive speed" /proc/sys/dev/cdrom/info | cut -f3) \
pascal@18034 855 -eject -multi "$ISO"
pascal@18034 856 }
pascal@18034 857
pascal@18034 858 blankcd()
pascal@18034 859 {
pascal@18034 860 wodim -v -blank=fast
pascal@17635 861 }
pascal@17635 862
pascal@18675 863 customsector()
pascal@18675 864 {
pascal@19324 865 local c=$(echo $(get 32848 "$ISO" 4))
pascal@19324 866 hascustomconf $(($c+16)) && echo $(($c+16)) || echo $c
pascal@18675 867 }
pascal@18675 868
pascal@18675 869 hascustomconf()
pascal@18675 870 {
pascal@19324 871 [ "$(ddq bs=2k skip=${1:-$(customsector)} if="$ISO" | ddq bs=1 count=6)" \
pascal@18675 872 == "#!boot" ]
pascal@18675 873 }
pascal@18675 874
pascal@18675 875 gotcustomconf()
pascal@18675 876 {
pascal@18675 877 hascustomconf && menuitem "$@"
pascal@18675 878 }
pascal@18675 879
pascal@19425 880 hasflavor()
pascal@19425 881 {
pascal@19425 882 [ -x /usr/bin/tazlito ] && [ -s $media/boot/bzImage ] && menuitem "$@"
pascal@19425 883 }
pascal@19425 884
pascal@17635 885 gotisomd5()
pascal@17635 886 {
pascal@17635 887 [ "$(which md5sum 2> /dev/null)" ] &&
pascal@18670 888 [ $(get 0 "$ISO") -eq 23117 ] &&
pascal@18670 889 [ $(get 18 "$ISO") -ne 0 ] && menuitem "$@"
pascal@17635 890 }
pascal@17635 891
pascal@18675 892 getcustomconf()
pascal@18675 893 {
pascal@18675 894 ddq bs=2k skip=$(customsector) if="$ISO" | while read line; do
pascal@18675 895 case "$line" in
pascal@18675 896 \#!boot*) ;;
pascal@18675 897 append=*) echo ${line#append=} > cmdline && ls -l $PWD/cmdline ;;
pascal@18675 898 initrd:*) cnt=${line#initrd:}
pascal@18675 899 { ddq bs=512 count=$(($cnt / 512));
pascal@18675 900 ddq bs=1 count=$(($cnt % 512)); } > initrd &&
pascal@18675 901 ls -l $PWD/initrd
pascal@18675 902 break ;;
pascal@18675 903 *) break ;;
pascal@18675 904 esac
pascal@18675 905 done
pascal@18675 906 [ "$1" ] && return 0
pascal@18675 907 echo -e "\rPress RETURN to continue."
pascal@18675 908 read n
pascal@18675 909 }
pascal@18675 910
pascal@17635 911 isomd5()
pascal@17635 912 {
pascal@17635 913 dotwait "Checking iso image"
pascal@18670 914 [ "$(ddq if="$ISO" bs=2k skip=16 \
pascal@19323 915 count=$(($(get 32848 "$ISO" 4)-16)) | md5sum)" == \
pascal@18670 916 "$(ddq if="$ISO" bs=16 count=1 skip=2047 | od -N 16 -t x1 -An | \
pascal@17635 917 sed 's/ //g') -" ] && echo "OK" || echo "ERROR"
pascal@17635 918 echo -en "\rChecking iso hybrid boot..."
pascal@18671 919 n=$(($(get 2 "$ISO")-1+($(get 4 "$ISO")-1)*512))
pascal@17635 920 if [ $n -lt 40000 -a $n -gt 32768 ]; then
pascal@18670 921 s=$(get 0 "$ISO" 2 $n | awk '{ i+= $0 } END { print i }')
pascal@18670 922 [ $(((1+$s+$(get $(($n+1)) "$ISO" 1)) % 65536)) -eq 0 ] &&
pascal@17635 923 echo "OK" || echo "ERROR"
pascal@17635 924 fi
pascal@18675 925 if hascustomconf; then
pascal@18672 926 echo -en "\rChecking iso custom config..."
pascal@18672 927 TMP=/tmp/$(basename $0)$$md5
pascal@18675 928 md5="$(ddq bs=2k skip=$(customsector) if="$ISO" | while read line; do
pascal@18670 929 case "$line" in
pascal@18672 930 \#!boot*) echo ${line#*boot } > $TMP ;;
pascal@18670 931 append=*) echo $line ;;
pascal@18670 932 initrd:*) echo $line
pascal@18675 933 cnt=${line#initrd:}
pascal@18675 934 ddq bs=512 count=$((cnt / 512))
pascal@18675 935 ddq bs=1 count=$((cnt % 512))
pascal@18670 936 break ;;
pascal@18670 937 *) break ;;
pascal@18670 938 esac
pascal@18670 939 done | md5sum | cut -c1-32)"
pascal@18672 940 [ "$md5" == "$(cat $TMP)" ] && echo "OK" || echo "ERROR"
pascal@18672 941 rm -f $TMP
pascal@18670 942 fi
pascal@17635 943 rm -f /tmp/wait
pascal@17928 944 [ "$1" ] && return 0
pascal@17635 945 echo -e "\rPress RETURN to continue."
pascal@17635 946 read n
pascal@17635 947 }
pascal@17635 948
pascal@17635 949 usbdev()
pascal@17635 950 {
pascal@17635 951 dotwait "Wait 5 seconds for USB devices"
pascal@17635 952 sleep 5
pascal@17635 953 rm -f /tmp/wait
pascal@17635 954 DEV="$(grep -l 1 /sys/block/*/removable | \
pascal@17635 955 sed 's|/sys/block/\(.*\)/removable|\1|')"
pascal@17635 956 grep -qs 1 /sys/block/$DEV/ro && return
pascal@17635 957 [ "$DEV" ] || return
pascal@17635 958 cat > /tmp/dialog$$ <<EOT
pascal@17635 959 $DIALOG --clear \
pascal@17635 960 --title " Select your USB key " \
pascal@17635 961 --menu "\nPlease select the USB key according to its known size.\n\n" \
pascal@18240 962 0 0 0 \
pascal@17635 963 $(for i in $DEV ; do
pascal@17635 964 echo -n "/dev/$i \"$(($(cat /sys/block/$i/size)/2048))MB $(cat /sys/block/$i/device/model 2> /dev/null)\" "
pascal@17635 965 done) \
pascal@17635 966
pascal@17635 967 EOT
pascal@17635 968 exec 3>&1
pascal@17635 969 device=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17635 970 rm -f /tmp/dialog$$
pascal@17635 971 retval=$?
pascal@17635 972 exec 3>&-
pascal@17635 973 rm -f /tmp/dialog$$
pascal@17635 974 [ $retval -eq 0 ]
pascal@17635 975 }
pascal@17635 976
pascal@17635 977 tazusbmsg()
pascal@17635 978 {
pascal@17635 979 [ "$(which tazusb 2> /dev/null)" ] || return
pascal@17635 980 echo "You should choose 'USB key read/write installation' to be
pascal@17635 981 able to save the package updates or your own configuration and data files.\n\n"
pascal@17635 982 }
pascal@17635 983
pascal@17635 984 usbbootkey()
pascal@17635 985 {
pascal@17924 986 if [ -b "$1" ]; then
pascal@17924 987 device=$1
pascal@17928 988 elif [ "$1" ]; then
pascal@17928 989 echo "Invalid USB key device"
pascal@17928 990 return 1
pascal@17924 991 else
pascal@17924 992 $DIALOG --clear \
pascal@17924 993 --title " Create a USB boot key " \
pascal@17924 994 --yes-label "Continue" --yesno \
pascal@17635 995 "\nThe USB key will be used like a CD-ROM. You will not be able to write
pascal@17635 996 any data on the boot partition.\n\n
pascal@17635 997 An extra FAT32 partition will be created with the remaining free space.\n\n
pascal@17635 998 $(tazusbmsg)Please plug your USB stick in now.\n
pascal@17635 999 " 16 70
pascal@17924 1000 [ $? -eq 0 ] || return
pascal@17924 1001 usbdev || return
pascal@17635 1002
pascal@17924 1003 # perform dd in progress bar
pascal@18670 1004 max=$(($(stat -c %s "$ISO")/2048))
pascal@18670 1005 i=0; ddq if="$ISO" bs=1024k | (
pascal@17924 1006 while ddq bs=1024k count=1 ; do
pascal@17924 1007 i=$(($i + 1))
pascal@17924 1008 [ $i -gt $max ] && break
pascal@17924 1009 echo $((($i*100)/$max)) | dialog --gauge \
pascal@17924 1010 " The ISO image transfer can be long. Please wait..." \
pascal@17924 1011 6 70 0 > /dev/tty 2>&1
pascal@17924 1012 done ) > $device
pascal@17924 1013 fi
pascal@17635 1014
paul@17671 1015 # partition + fat32 format for the remaining space
pascal@17860 1016 for p in 0 16; do
pascal@17860 1017 get $((450+$p)) $device 2 12 | xargs echo | {
pascal@17860 1018 read dx cx ol oh ll lh
pascal@17860 1019 [ $dx -eq $((0x3F17)) ] || continue
pascal@17635 1020 cx=$(($cx & 0xFF00))
pascal@17635 1021 ofs=$(($ll+($lh<<16)))
pascal@17635 1022 n=$(($(cat /sys/block/${device#/dev/}/size)-$ofs))
pascal@17635 1023 m=$(($cx+($n/8)))
pascal@17635 1024 [ $m -gt $((0x3FF00)) ] && m=$((0x3FF00))
pascal@17635 1025 m=$((($m & 0xFF00)+(($m>>16)<<6)))
pascal@17635 1026 words2bin 0 $((0x101+$cx)) 0x3F0B $((32+$m)) \
pascal@17635 1027 $ll $lh $(($n & 0xFFFF)) $(($n >> 16)) | \
pascal@17860 1028 ddq bs=1 seek=$((462-$p)) of=$device
pascal@17635 1029 if [ "$(which mkdosfs 2> /dev/null)" ]; then
pascal@17635 1030 losetup -o $((512*$ofs)) /dev/loop2 $device
pascal@17635 1031 mkdosfs -n "SLITAZ BOOT" /dev/loop2
pascal@17635 1032 words2bin $(($ofs & 0xFFFF)) $(($ofs >> 16)) | \
pascal@17635 1033 ddq bs=1 seek=28 of=/dev/loop2
pascal@17860 1034 sync
pascal@17635 1035 losetup -d /dev/loop2
pascal@17635 1036 fi
pascal@17860 1037 }
pascal@17860 1038 done
pascal@17635 1039 }
pascal@17635 1040
pascal@17635 1041 usbkey()
pascal@17635 1042 {
pascal@17635 1043 $DIALOG --clear \
pascal@17635 1044 --title " Create a SliTaz USB key " \
pascal@17635 1045 --yes-label "Continue" --yesno \
pascal@17635 1046 "\nUnlike a hard drive install, the filesystem is kept in a compressed
pascal@17635 1047 rootfs.gz. The filesystem is loaded entirely into memory upon boot.
pascal@17635 1048 This should increase responsiveness, protect the filesystem against
pascal@17635 1049 accidental corruption and reduce read/writes to the USB drive.
pascal@17635 1050 Once setup, the tazusb utility can rewrite the root filesystem
pascal@17635 1051 with any changes you have made since booting up,
pascal@17635 1052 giving the effective benefits of a hard drive install.\n\n
pascal@17635 1053 /home is mounted on boot using the UUID of your particular flash drive.
pascal@17635 1054 Unlike a device name, the UUID has the benefit of never changing from machine
pascal@17635 1055 to machine.\n\n
pascal@17635 1056 Please plug your USB stick in now.\n
pascal@17635 1057 " 19 70
pascal@17635 1058 [ $? -eq 0 ] || return
pascal@17635 1059 usbdev || return
pascal@17635 1060 exec 3>&1
pascal@17635 1061 format=`$DIALOG --clear \
pascal@17635 1062 --title " Select the filesystem " \
pascal@17635 1063 --radiolist "\nPlease select the filesystem type to create.\n\n\
pascal@17635 1064 The filesystem creation will erase all the data \
pascal@17635 1065 in the USB key." 14 70 4 \
pascal@17635 1066 "none" "Do not erase the USB key" on \
pascal@17635 1067 "ext3" "Ext3 journaling filesystem" off \
pascal@17635 1068 "ext2" "Ext2 filesystem" off \
pascal@17635 1069 "fat32" "Windows FAT32 filesystem" off \
pascal@17635 1070 2>&1 1>&3`
pascal@17635 1071 retval=$?
pascal@17635 1072 exec 3>&-
pascal@17635 1073 [ $retval -eq 0 ] || return
pascal@17635 1074 [ "$format" != "none" ] && tazusb format $device "SliTaz" $format
pascal@18670 1075 tazusb gen-iso2usb "$ISO" $device
pascal@17635 1076 }
pascal@17635 1077
pascal@17635 1078 dokexec()
pascal@17635 1079 {
pascal@17659 1080 kexec -l $file || return
pascal@18240 1081 quit "kexec -e"
pascal@17635 1082 }
pascal@17635 1083
pascal@17635 1084 runmemtest()
pascal@17635 1085 {
pascal@17635 1086 gotcdfile 'memtest*' && dokexec
pascal@17635 1087 }
pascal@17635 1088
pascal@17635 1089 runpxe()
pascal@17635 1090 {
pascal@17635 1091 gotcdfile '?pxe' && dokexec
pascal@17635 1092 }
pascal@17635 1093
pascal@17931 1094 flavdata()
pascal@17931 1095 {
pascal@18670 1096 [ $(get 1024 "$ISO") -eq 35615 ] && n=2 || n=$((1+$(get 417 "$ISO" 1)))
pascal@19425 1097 [ $n -eq 4 ] && n=20
pascal@19510 1098 ddq if="$ISO" bs=512 skip=$n count=20 | zcat 2>/dev/null
pascal@17931 1099 }
pascal@17931 1100
pascal@17931 1101 hasflavinfo()
pascal@17931 1102 {
pascal@19510 1103 [ "$(flavdata | ddq bs=1 count=8 | strings)" == \
pascal@17931 1104 "07070100" ] && menuitem "$@"
pascal@17931 1105 }
pascal@17931 1106
pascal@17931 1107 showfavinfo()
pascal@17931 1108 {
pascal@17931 1109 mkdir -p /tmp/data
pascal@17931 1110 flavdata | ( cd /tmp/data ; cpio -i )
pascal@17931 1111 file=/tmp/data/info
pascal@17931 1112 cat /tmp/data/*desc > $file
pascal@18627 1113 if [ -s /tmp/data/*receipt ]; then
pascal@18627 1114 echo "=== receipt ==="
pascal@18627 1115 cat /tmp/data/*receipt
pascal@18627 1116 fi >> $file
pascal@17931 1117 for i in /tmp/data/*list* ; do
pascal@17931 1118 echo "=== extra ${i#*list} files"
pascal@17931 1119 cat $i
pascal@17931 1120 done >> $file
pascal@17931 1121 if [ "$1" ]; then
pascal@17931 1122 cat $file
pascal@17931 1123 else
pascal@17931 1124 $DIALOG --clear \
paul@17935 1125 --title " Flavor info " \
pascal@18240 1126 --textbox $file 0 0
pascal@17931 1127 fi
pascal@17931 1128 rm -rf /tmp/data
pascal@17931 1129 }
pascal@17931 1130
pascal@18626 1131 flavor()
pascal@18626 1132 {
pascal@18626 1133 name="$(flavdata | cpio -t 2> /dev/null | sed 's/.[a-z]*$//;q')"
pascal@18626 1134 echo "Create ${name:=flavor}.flavor..."
pascal@18670 1135 tazlito iso2flavor "$ISO" $name
pascal@18771 1136 ls -l $name.flavor 2> /dev/null && return
pascal@18771 1137 sleep 5
pascal@18771 1138 [ "$1" ] && return
pascal@18771 1139 echo -e "\rPress RETURN to continue."
pascal@18771 1140 read n
pascal@18626 1141 }
pascal@18626 1142
pascal@18140 1143 if [ "$1" == "--build" ]; then #install-begin
pascal@18151 1144 uuencode -m - < ifmem.bin | sed -e '/^ifmemcode$/r/dev/stdin' \
pascal@18151 1145 -e '/^ifmemcode$/d' -i $0
pascal@18140 1146 uuencode -m - < bootloader.bin | sed -e '/^bootloader$/r/dev/stdin' \
pascal@18140 1147 -e '/^bootloader$/d' -e '/install-begin$/,/install-end$/d' -i $0
pascal@18140 1148 exit
pascal@18140 1149 fi #install-end
pascal@18140 1150 parse_isolinux()
pascal@18140 1151 {
pascal@18140 1152 awk 'BEGIN { IGNORECASE=1 }
pascal@18145 1153 function multi(n)
pascal@18145 1154 {
pascal@18145 1155 auto=$n
pascal@18145 1156 for (--n; n < NF; n+=2) {
pascal@18145 1157 s=$n
pascal@18145 1158 if (s ~ /M$/) s = substr(s,0,length(s)-1)
pascal@18145 1159 else s /= 1024
pascal@18145 1160 sizes=int(s) " " sizes
pascal@18145 1161 }
pascal@18145 1162 next
pascal@18145 1163 }
pascal@18140 1164 {
pascal@18140 1165 if ($1 == "LABEL") {
pascal@18140 1166 label=$2
pascal@18140 1167 if (auto == "") auto=label
pascal@18140 1168 }
pascal@18140 1169 if ($1 == "KERNEL" || $1 == "COM32") kernel[label]=$2
pascal@18140 1170 if ($1 == "INITRD") initrd[label]=$2
pascal@18140 1171 if ($1 == "APPEND") {
pascal@18140 1172 i=2
pascal@18145 1173 if (kernel[label] ~ "ifmem.c32") multi(3)
pascal@18140 1174 if (kernel[label] ~ "c32box.c32") {
pascal@18140 1175 if ($2 == "linux") { kernel[label]=$3; i=4 }
pascal@18145 1176 if ($2 == "ifmem") multi(4)
pascal@18140 1177 }
pascal@18140 1178 if (kernel[label] ~ "ifcpu64.c32") { auto=$4; next }
pascal@18140 1179 while (i <= NF) {
pascal@18140 1180 if ($i ~ "^initrd=") initrd[label]=substr($i,8)
pascal@18140 1181 else cmdline[label]=cmdline[label] " " $i
pascal@18140 1182 i++
pascal@18140 1183 }
pascal@18140 1184 }
pascal@18140 1185 }
pascal@18140 1186 END {
pascal@18140 1187 print "KERNEL=\"" kernel[auto] "\""
pascal@18140 1188 print "INITRD=\"" initrd[auto] "\""
pascal@18140 1189 print "CMDLINE=\"" substr(cmdline[auto],2) "\""
pascal@18145 1190 print "SIZES=\"" sizes "\""
pascal@18140 1191 }'
pascal@18140 1192 }
pascal@18140 1193
pascal@18140 1194 locase()
pascal@18140 1195 {
pascal@18140 1196 echo "$1" | tr [A-Z] [a-z]
pascal@18140 1197 }
pascal@18140 1198
pascal@18151 1199 ifmemcode()
pascal@18151 1200 {
pascal@18151 1201 uudecode <<EOT
pascal@18151 1202 ifmemcode
pascal@18151 1203 EOT
pascal@18151 1204 }
pascal@18151 1205
pascal@18140 1206 floppyset()
pascal@18140 1207 {
pascal@19425 1208 gotcdfile 'isolinux.cfg'
pascal@19432 1209 $0 include $file | parse_isolinux > /tmp/var$$
pascal@18140 1210 . /tmp/var$$
pascal@19425 1211 [ -z "$KERNEL" ] && echo "Can't parse isolinux.cfg" && return
pascal@18240 1212 for i in $media/$KERNEL $(dirname $file)/$KERNEL $media/$(locase $KERNEL) \
pascal@18240 1213 $(dirname $file)/$(locase $KERNEL); do
pascal@19433 1214 i="$(ls $i* | sed q)"
pascal@19433 1215 [ -n "$i" ] && KERNEL=$i && break
pascal@18240 1216 done
pascal@18140 1217 rm -f /tmp/var$$
pascal@18240 1218 [ $(get 514 $KERNEL 4) -eq 1400005704 ] || return
pascal@18240 1219 n=$(($(get 497 $KERNEL 1)+1))
pascal@18240 1220 ddq bs=512 count=$n if=$KERNEL of=/tmp/fd$$
pascal@18140 1221 uudecode <<EOT | ddq of=/tmp/fd$$ conv=notrunc
pascal@18140 1222 bootloader
pascal@18140 1223 EOT
pascal@18140 1224 pos=$(($n*512))
pascal@18140 1225 if [ -n "$CMDLINE" ]; then
pascal@18140 1226 echo -n "$CMDLINE" | ddq bs=512 count=1 conv=sync >> /tmp/fd$$
pascal@18140 1227 bytes2bin $n | ddq conv=notrunc \
pascal@18140 1228 bs=1 seek=497 count=1 of=/tmp/fd$$
pascal@18140 1229 words2bin $pos | ddq conv=notrunc \
pascal@18140 1230 bs=1 seek=34 count=2 of=/tmp/fd$$
pascal@18240 1231 [ $(get 518 $KERNEL 4) -ge 514 ] &&
pascal@18155 1232 words2bin 32768 9 | ddq conv=notrunc \
pascal@18140 1233 bs=1 seek=552 count=4 of=/tmp/fd$$
pascal@18140 1234 fi
pascal@18140 1235 syssize=$(echo $(get 500 /tmp/fd$$ 4))
pascal@18240 1236 ddq bs=512 skip=$n if=$KERNEL | cat - /dev/zero | \
pascal@18155 1237 ddq bs=512 count=$((($syssize+31)/32)) conv=sync >> /tmp/fd$$
pascal@18140 1238 base=$(stat -c %s /tmp/fd$$)
pascal@18140 1239 len=
pascal@18140 1240 if [ "$INITRD" ]; then
pascal@18140 1241 l=0
pascal@18140 1242 for i in ${INITRD//,/ }; do
pascal@18240 1243 for j in $media/$i $(dirname $KERNEL)/$i $media/$(locase $i) \
pascal@18240 1244 $(dirname $KERNEL)/$(locase $i); do
pascal@19433 1245 j="$(ls $j* | sed q)"
pascal@19433 1246 [ -n "$j" ] && i=$j && break
pascal@18240 1247 done
pascal@18240 1248 ddq if=$i >> /tmp/fd$$
pascal@18240 1249 l=$(($l+$(stat -c %s $i)))
pascal@18140 1250 r=$((4 - ($l % 4)))
pascal@18140 1251 if [ $r -ne 4 ]; then
pascal@18140 1252 ddq if=/dev/zero bs=1 count=$r >> /tmp/fd$$
pascal@18140 1253 l=$(($l + $r))
pascal@18140 1254 fi
pascal@18143 1255 case "$i:$INITRD" in
pascal@18143 1256 *rootfs.gz:*rootfs.gz,*) continue # loram
pascal@18140 1257 esac
pascal@18140 1258 len="$len $l"; l=0
pascal@18140 1259 done
pascal@18143 1260 rdadrs=${RDADRS:-$(((($syssize*16)+0x1F0000) & -4096))}
pascal@18140 1261 words2bin $(($rdadrs & 0xFFFF)) $(($rdadrs >> 16)) | ddq \
pascal@18140 1262 conv=notrunc bs=1 seek=536 count=4 of=/tmp/fd$$
pascal@18140 1263 fi
pascal@18140 1264 n=$(echo $len | wc -w)
pascal@18140 1265 if [ $((494 - $(get 494 /tmp/fd$$))) -ge $(($n * 4)) ]; then
pascal@18140 1266 i=$(($(get 494 /tmp/fd$$)))
pascal@18140 1267 bytes2bin $(($i + ($n*4) - 256)) | ddq bs=1 conv=notrunc \
pascal@18140 1268 seek=496 count=1 of=/tmp/fd$$
pascal@18140 1269 else
pascal@18140 1270 i=$(($pos + 0x1FC - ($n*4)))
pascal@18140 1271 bytes2bin $(($i % 256)) $((i / 256)) 252 | ddq bs=1 \
pascal@18140 1272 conv=notrunc seek=494 count=3 of=/tmp/fd$$
pascal@18151 1273 s=$(($i - 2*$(echo "$SIZES" | wc -w)))
pascal@18151 1274 p=$(($s - $(ifmemcode | wc -c)))
pascal@18151 1275 ifmemcode | ddq bs=1 conv=notrunc seek=$p of=/tmp/fd$$
pascal@18151 1276 words2bin $SIZES | ddq bs=1 conv=notrunc seek=$s of=/tmp/fd$$
pascal@18151 1277 bytes2bin 154 $(($p%256)) $(($p/256)) 0 144 | \
pascal@18151 1278 ddq bs=1 conv=notrunc seek=60 of=/tmp/fd$$
pascal@18140 1279 fi
pascal@18140 1280 for r in $len ; do
pascal@18140 1281 words2bin $(($r & 0xFFFF)) $(($r >> 16)) | ddq conv=notrunc \
pascal@18140 1282 bs=1 seek=$i count=4 of=/tmp/fd$$
pascal@18140 1283 i=$(($i + 4))
pascal@18140 1284 done
pascal@18140 1285 split -b 1440k /tmp/fd$$ fd$$
pascal@18140 1286 rm -f /tmp/fd$$
pascal@18140 1287 n=1; i=0; r=0
pascal@18140 1288 set -- $len
pascal@18140 1289 ls fd$$* | while read file ; do
pascal@18140 1290 if [ $i -gt $(($1+$base)) ]; then
pascal@18140 1291 shift
pascal@18140 1292 r=$(($r+100)); n=0; i=0; base=0
pascal@18140 1293 fi
pascal@18140 1294 ddq of=$file bs=18k seek=80 count=0
pascal@18140 1295 i=$(($i+1474560))
pascal@18140 1296 printf "mv %s fd%03d.img\n" $file $(($r+$n))
pascal@18140 1297 n=$(($n+1))
pascal@18140 1298 done | sh
pascal@19029 1299 du -ch $PWD/fd???.img
pascal@18140 1300 }
pascal@18140 1301
pascal@17635 1302 quit()
pascal@17635 1303 {
pascal@18240 1304 umount -d $media
pascal@18240 1305 rmdir $media
pascal@18240 1306 ${1:-exit}
pascal@17635 1307 }
pascal@17635 1308
pascal@19008 1309 infoiso()
pascal@19008 1310 {
pascal@19008 1311 isoinfo -d -i "$ISO" > /tmp/isoinfo$$
pascal@19008 1312 if [ -x "$(which iso2exe)" ]; then
pascal@19008 1313 echo "----"
pascal@19008 1314 iso2exe -l "$ISO"
pascal@19008 1315 fi >> /tmp/isoinfo$$
pascal@19008 1316 if [ "$1" ]; then
pascal@19008 1317 cat /tmp/isoinfo$$
pascal@19008 1318 else
pascal@19008 1319 $DIALOG --clear \
pascal@19008 1320 --title " Info ISO " \
pascal@19008 1321 --textbox /tmp/isoinfo$$ 0 0
pascal@19008 1322 fi
pascal@19008 1323 rm -f /tmp/isoinfo$$
pascal@19008 1324 }
pascal@19008 1325
pascal@18289 1326 isotitle()
pascal@18289 1327 {
pascal@18778 1328 echo "$(blkid "$ISO" | sed 's/.*LABEL="\([^"]*\).*/\1/') $(stat \
pascal@18778 1329 -c %y $media/.|sed 's/ .*//') $(basename "$ISO")"
pascal@18289 1330 }
pascal@18289 1331
pascal@19432 1332 if [ "$1" == "include" ]; then
pascal@19432 1333 [ -s "$2" ] && cd $(dirname "$2") && awk -v exe=$0 \
pascal@19432 1334 '{ if ($1 == "include") system(exe " include " $2); else print }' <"$2"
pascal@19432 1335 exit
pascal@19432 1336 fi
pascal@18034 1337 ISO="${1:-/dev/null}"
pascal@17635 1338 [ -z "$(isiso 2> /dev/null)" ] && echo "Usage : $0 file.iso" && exit 1
pascal@18666 1339 media=/tmp/media$$
pascal@18240 1340 mkdir -p $media
pascal@18670 1341 mount -o loop,ro "$ISO" $media
pascal@17635 1342
pascal@17928 1343 if [ "$2" == "list" ]; then
pascal@17928 1344 sed '/^\$(.*") \\/!d;s/^\$(\(.*\)").*/\1"/' $0 | while read line; do
pascal@17928 1345 eval $line
pascal@17928 1346 echo
pascal@17928 1347 done | sed '/^$/d;/"usbkey"/d'
pascal@17928 1348 quit
pascal@17928 1349 fi
pascal@17924 1350 if grep -q "^$2()" $0; then
pascal@17924 1351 exe=$2
pascal@17924 1352 shift 2
pascal@18140 1353 if [ -n "$(eval $(grep "\"$exe\"" $0 | sed \
pascal@18140 1354 '/^\$/!d;s/.(\(.*\)[\t ]*".*"[\t ]*".*/\1/'))" ]; then
pascal@18289 1355 isotitle
pascal@17924 1356 grep "\"$exe\"" $0 | sed '/^\$/!d;s/.*"[\t ]*"\(.*\)".*/\1/'
pascal@18140 1357 echo ----
pascal@17924 1358 $exe "$@"
pascal@17924 1359 fi
pascal@17924 1360 quit
pascal@17924 1361 fi
pascal@17924 1362
pascal@17635 1363 while true; do
pascal@17635 1364 cat > /tmp/dialog$$ <<EOT
pascal@17635 1365 $DIALOG --clear \
pascal@18289 1366 --title " $(isotitle) " \
pascal@18240 1367 --menu "" -2 70 0 \
pascal@17635 1368 $(cdfile 'README*' "readme" "Show the README file") \
pascal@18675 1369 $(gotcustomconf "getcustomconf" "Get custom config") \
pascal@17635 1370 $(gotisomd5 "isomd5" "Check the ISO image") \
pascal@17635 1371 $(cdfile 'md5sum*' "md5" "Check the ISO files") \
pascal@17635 1372 $(cdfile 'sha*sum*' "sha" "Check the ISO files") \
pascal@19008 1373 $(xfile isoinfo "infoiso" "ISO image info") \
pascal@17635 1374 $(cdfilex boot/bzImage "bootiso" "Boot the ISO image") \
pascal@18034 1375 $(burnable "burniso" "Burn the ISO image") \
pascal@18034 1376 $(blankable "blankcd" "Blank the CD/DVD") \
pascal@17635 1377 $(gotposixovl "install" "Hard disk installation (UMSDOS way)") \
pascal@17635 1378 $(gotposixovl "installtaz" "Hard disk installation (TAZUSB way)") \
pascal@17635 1379 $(gotposixovlzip "inst2zip" "ZIP installation archive (UMSDOS way)") \
pascal@17635 1380 $(gotposixovlzip "insttaz2zip" "ZIP installation archive (TAZUSB way)") \
pascal@19425 1381 $(gottazusb "usbkey" "USB key read/write installation") \
pascal@17635 1382 $(ishybrid "usbbootkey" "USB boot key (read only)") \
paul@17935 1383 $(hasflavinfo "showfavinfo" "Show flavor extra info") \
pascal@19425 1384 $(hasflavor "flavor" "Get flavor file") \
pascal@18140 1385 $(cdfile isolinux.cfg "floppyset" "Boot floppy set") \
pascal@18140 1386 $(hastazboot "tazboot" "Get tazboot.exe Linux loader") \
pascal@17635 1387 $(cdexe boot/bzImage "bzimage" "Get linux DOS/EXE file") \
pascal@17635 1388 $(cdexe 'memtest*' "memtest" "Get Memtest86 DOS/EXE file") \
pascal@17635 1389 $(cdfilef 'memtest*' "fdmemtest" "Create a Memtest86 boot floppy") \
pascal@17635 1390 $(cdfilex 'memtest*' "runmemtest" "Start Memtest86") \
pascal@17635 1391 $(cdexe '?pxe' "pxe" "Get SliTaz Web boot DOS/EXE utility") \
pascal@17635 1392 $(cdfilef '?pxe' "fdpxe" "Create a SliTaz Web boot floppy") \
pascal@17635 1393 $(cdfilex '?pxe' "runpxe" "Start the SliTaz Web boot utility") \
pascal@17635 1394 $(misspkg "missing" "Install packages to get more options") \
pascal@17924 1395 $(menuitem "quit" "Quit this utility")
pascal@17635 1396 EOT
pascal@17635 1397 exec 3>&1
pascal@17635 1398 value=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17635 1399 retval=$?
pascal@17635 1400 exec 3>&-
pascal@17635 1401 rm -f /tmp/dialog$$
pascal@18771 1402 [ $retval -eq 0 ] || quit
pascal@17635 1403 $value
pascal@17635 1404 done