SliTaz Repositories

     1.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.2 +++ b/nomad/stuff/nomad.conf	Sat Feb 22 14:51:20 2020 +0100
     1.3 @@ -0,0 +1,42 @@
     1.4 +## Configuration of nomad.
     1.5 +## You can specify as any places to connect as you want.
     1.6 +## Nomad will recognize them if they follow this format:
     1.7 +
     1.8 +########################################################################
     1.9 +# Name_I_want() {
    1.10 +#	BOOT="yes" or "no"
    1.11 +#	TYPE="wifi" or "ethernet"
    1.12 +#
    1.13 +#	#if ethernet:
    1.14 +#	DHCP="yes" or "no"
    1.15 +#	STATIC="yes" or "no"
    1.16 +#		IP="192.168.0.6
    1.17 +#		GATEWAY="192.168.0.1"
    1.18 +#		DNS_SERVER="192.168.0.1"
    1.19 +#
    1.20 +#	#if wifi:
    1.21 +#	ESSID="MY-ESSID"
    1.22 +#		#if wpa (need wpa_supplicant):
    1.23 +#		DRIVER="wext" or "my-wpa-driver"
    1.24 +#		WPA='	#my wpa_supplicant configuration, ex:
    1.25 +#				ap_scan=1
    1.26 +#				network={
    1.27 +#					ssid="SSID-WICH-NEED-WPA"
    1.28 +#					scan_ssid=1
    1.29 +#					proto=WPA
    1.30 +#					key_mgmt=WPA-PSK
    1.31 +#					psk=52b72d55b8ca0913c5339a2f
    1.32 +#					priority=5
    1.33 +#					}'
    1.34 +#		#if wep:
    1.35 +#		KEY="my-wep-key"
    1.36 +# }
    1.37 +########################################################################
    1.38 +
    1.39 +
    1.40 +## first, we have to say which interface is ethernet, which is wifi:
    1.41 +INTERFACE="eth0"
    1.42 +WIFI_INTERFACE="wlan0"
    1.43 +
    1.44 +## place here your differents access points:
    1.45 +