SliTaz Repositories

     1.1 --- a/glib/stuff/glib-CVE-2008-4316.diff	Wed May 13 22:48:36 2009 +0200
     1.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.3 @@ -1,62 +0,0 @@
     1.4 ---- glib/gbase64.c	2009/02/23 04:30:06	7897
     1.5 -+++ glib/gbase64.c	2009/03/12 13:30:55	7973
     1.6 -@@ -54,8 +54,9 @@
     1.7 -  *
     1.8 -  * The output buffer must be large enough to fit all the data that will
     1.9 -  * be written to it. Due to the way base64 encodes you will need
    1.10 -- * at least: @len * 4 / 3 + 6 bytes. If you enable line-breaking you will
    1.11 -- * need at least: @len * 4 / 3 + @len * 4 / (3 * 72) + 7 bytes.
    1.12 -+ * at least: (@len / 3 + 1) * 4 + 4 bytes (+ 4 may be needed in case of
    1.13 -+ * non-zero state). If you enable line-breaking you will need at least:
    1.14 -+ * ((@len / 3 + 1) * 4 + 4) / 72 + 1 bytes of extra space.
    1.15 -  *
    1.16 -  * @break_lines is typically used when putting base64-encoded data in emails.
    1.17 -  * It breaks the lines at 72 columns instead of putting all of the text on 
    1.18 -@@ -233,8 +234,14 @@
    1.19 -   g_return_val_if_fail (data != NULL, NULL);
    1.20 -   g_return_val_if_fail (len > 0, NULL);
    1.21 - 
    1.22 --  /* We can use a smaller limit here, since we know the saved state is 0 */
    1.23 --  out = g_malloc (len * 4 / 3 + 4);
    1.24 -+  /* We can use a smaller limit here, since we know the saved state is 0,
    1.25 -+     +1 is needed for trailing \0, also check for unlikely integer overflow */
    1.26 -+  if (len >= ((G_MAXSIZE - 1) / 4 - 1) * 3)
    1.27 -+    g_error("%s: input too large for Base64 encoding (%"G_GSIZE_FORMAT" chars)",
    1.28 -+        G_STRLOC, len);
    1.29 -+
    1.30 -+  out = g_malloc ((len / 3 + 1) * 4 + 1);
    1.31 -+
    1.32 -   outlen = g_base64_encode_step (data, len, FALSE, out, &state, &save);
    1.33 -   outlen += g_base64_encode_close (FALSE, out + outlen, &state, &save);
    1.34 -   out[outlen] = '\0';
    1.35 -@@ -275,7 +282,8 @@
    1.36 -  *
    1.37 -  * The output buffer must be large enough to fit all the data that will
    1.38 -  * be written to it. Since base64 encodes 3 bytes in 4 chars you need
    1.39 -- * at least: @len * 3 / 4 bytes.
    1.40 -+ * at least: (@len / 4) * 3 + 3 bytes (+ 3 may be needed in case of non-zero
    1.41 -+ * state).
    1.42 -  * 
    1.43 -  * Return value: The number of bytes of output that was written
    1.44 -  *
    1.45 -@@ -358,7 +366,8 @@
    1.46 - 		 gsize       *out_len)
    1.47 - {
    1.48 -   guchar *ret;
    1.49 --  gint input_length, state = 0;
    1.50 -+  gsize input_length;
    1.51 -+  gint state = 0;
    1.52 -   guint save = 0;
    1.53 -   
    1.54 -   g_return_val_if_fail (text != NULL, NULL);
    1.55 -@@ -368,7 +377,9 @@
    1.56 - 
    1.57 -   g_return_val_if_fail (input_length > 1, NULL);
    1.58 - 
    1.59 --  ret = g_malloc0 (input_length * 3 / 4);
    1.60 -+  /* We can use a smaller limit here, since we know the saved state is 0,
    1.61 -+     +1 used to avoid calling g_malloc0(0), and hence retruning NULL */
    1.62 -+  ret = g_malloc0 ((input_length / 4) * 3 + 1);
    1.63 -   
    1.64 -   *out_len = g_base64_decode_step (text, input_length, ret, &state, &save);
    1.65 -   

     2.1 --- a/glibmm-dev/receipt	Wed May 13 22:48:36 2009 +0200
     2.2 +++ b/glibmm-dev/receipt	Wed May 13 22:51:40 2009 +0200
     2.3 @@ -1,7 +1,7 @@
     2.4  # SliTaz package receipt.
     2.5  
     2.6  PACKAGE="glibmm-dev"
     2.7 -VERSION="2.18.1"
     2.8 +VERSION="2.20.0"
     2.9  CATEGORY="development"
    2.10  SHORT_DESC="Callback Framework for C++ devel files."
    2.11  MAINTAINER="pankso@slitaz.org"

     3.1 --- a/glibmm/receipt	Wed May 13 22:48:36 2009 +0200
     3.2 +++ b/glibmm/receipt	Wed May 13 22:51:40 2009 +0200
     3.3 @@ -1,7 +1,7 @@
     3.4  # SliTaz package receipt.
     3.5  
     3.6  PACKAGE="glibmm"
     3.7 -VERSION="2.18.1"
     3.8 +VERSION="2.20.0"
     3.9  CATEGORY="x-window"
    3.10  SHORT_DESC="C++ interface for the popular GUI library GTK+."
    3.11  MAINTAINER="pankso@slitaz.org"
    3.12 @@ -9,7 +9,7 @@
    3.13  BUILD_DEPENDS="libsigc++ libsigc++-dev libgio libgio-dev"
    3.14  TARBALL="$PACKAGE-$VERSION.tar.gz"
    3.15  WEB_SITE="http://www.gtkmm.org/"
    3.16 -WGET_URL="http://ftp.gnome.org/pub/GNOME/sources/glibmm/2.18/$TARBALL"
    3.17 +WGET_URL="http://ftp.gnome.org/pub/GNOME/sources/glibmm/2.20/$TARBALL"
    3.18  
    3.19  # Rules to configure and make the package.
    3.20  compile_rules()

     4.1 --- a/gtkmm-dev/receipt	Wed May 13 22:48:36 2009 +0200
     4.2 +++ b/gtkmm-dev/receipt	Wed May 13 22:51:40 2009 +0200
     4.3 @@ -1,7 +1,7 @@
     4.4  # SliTaz package receipt.
     4.5  
     4.6  PACKAGE="gtkmm-dev"
     4.7 -VERSION="2.14.3"
     4.8 +VERSION="2.16.0"
     4.9  CATEGORY="development"
    4.10  SHORT_DESC="Callback Framework for C++ devel files."
    4.11  MAINTAINER="pankso@slitaz.org"

     5.1 --- a/gtkmm/receipt	Wed May 13 22:48:36 2009 +0200
     5.2 +++ b/gtkmm/receipt	Wed May 13 22:51:40 2009 +0200
     5.3 @@ -1,7 +1,7 @@
     5.4  # SliTaz package receipt.
     5.5  
     5.6  PACKAGE="gtkmm"
     5.7 -VERSION="2.14.3"
     5.8 +VERSION="2.16.0"
     5.9  CATEGORY="x-window"
    5.10  SHORT_DESC="C++ interface for the popular GUI library GTK+."
    5.11  MAINTAINER="pankso@slitaz.org"
    5.12 @@ -10,7 +10,7 @@
    5.13  doxygen libgiomm-dev"
    5.14  TARBALL="$PACKAGE-$VERSION.tar.gz"
    5.15  WEB_SITE="http://www.gtkmm.org/"
    5.16 -WGET_URL="http://ftp.gnome.org/pub/GNOME/sources/gtkmm/2.14/$TARBALL"
    5.17 +WGET_URL="http://ftp.gnome.org/pub/GNOME/sources/gtkmm/2.16/$TARBALL"
    5.18  
    5.19  # Rules to configure and make the package.
    5.20  compile_rules()

     6.1 --- a/libgiomm-dev/receipt	Wed May 13 22:48:36 2009 +0200
     6.2 +++ b/libgiomm-dev/receipt	Wed May 13 22:51:40 2009 +0200
     6.3 @@ -1,7 +1,7 @@
     6.4  # SliTaz package receipt.
     6.5  
     6.6  PACKAGE="libgiomm-dev"
     6.7 -VERSION="2.18.1"
     6.8 +VERSION="2.20.0"
     6.9  CATEGORY="development"
    6.10  SHORT_DESC="GIO Framework for C++ devel files."
    6.11  MAINTAINER="pankso@slitaz.org"

     7.1 --- a/libgiomm/receipt	Wed May 13 22:48:36 2009 +0200
     7.2 +++ b/libgiomm/receipt	Wed May 13 22:51:40 2009 +0200
     7.3 @@ -1,7 +1,7 @@
     7.4  # SliTaz package receipt.
     7.5  
     7.6  PACKAGE="libgiomm"
     7.7 -VERSION="2.18.1"
     7.8 +VERSION="2.20.0"
     7.9  CATEGORY="x-window"
    7.10  SHORT_DESC="GIO Framework for C++."
    7.11  MAINTAINER="pankso@slitaz.org"

     8.1 --- a/pangomm-dev/receipt	Wed May 13 22:48:36 2009 +0200
     8.2 +++ b/pangomm-dev/receipt	Wed May 13 22:51:40 2009 +0200
     8.3 @@ -1,7 +1,7 @@
     8.4  # SliTaz package receipt.
     8.5  
     8.6  PACKAGE="pangomm-dev"
     8.7 -VERSION="2.14.1"
     8.8 +VERSION="2.24.0"
     8.9  CATEGORY="development"
    8.10  SHORT_DESC="Pangomm library devel files."
    8.11  MAINTAINER="pankso@slitaz.org"

     9.1 --- a/pangomm/receipt	Wed May 13 22:48:36 2009 +0200
     9.2 +++ b/pangomm/receipt	Wed May 13 22:51:40 2009 +0200
     9.3 @@ -1,7 +1,7 @@
     9.4  # SliTaz package receipt.
     9.5  
     9.6  PACKAGE="pangomm"
     9.7 -VERSION="2.14.1"
     9.8 +VERSION="2.24.0"
     9.9  CATEGORY="x-window"
    9.10  SHORT_DESC="Pango binding for GTKmm."
    9.11  MAINTAINER="pankso@slitaz.org"
    9.12 @@ -9,7 +9,7 @@
    9.13  BUILD_DEPENDS="pixman-dev cairomm-dev glibmm-dev libgiomm-dev"
    9.14  TARBALL="$PACKAGE-$VERSION.tar.gz"
    9.15  WEB_SITE="http://ftp.gnome.org/pub/gnome/sources/pangomm/"
    9.16 -WGET_URL="http://ftp.gnome.org/pub/gnome/sources/pangomm/2.14/$TARBALL"
    9.17 +WGET_URL="http://ftp.gnome.org/pub/gnome/sources/pangomm/2.24/$TARBALL"
    9.18  
    9.19  # Rules to configure and make the package.
    9.20  compile_rules()
    9.21 @@ -18,7 +18,6 @@
    9.22      ./configure \
    9.23      	--prefix=/usr \
    9.24      	--mandir=/usr/share/man \
    9.25 -    	--with-html-dir=/usr/share/doc \
    9.26      	$CONFIGURE_ARGS &&
    9.27      make &&
    9.28      make DESTDIR=$PWD/_pkg install