wok rev 2199

Remove duplicate get-*-firmware
author Pascal Bellard <pascal.bellard@slitaz.org>
date Mon Feb 09 17:12:44 2009 +0000 (2009-02-09)
parents a21224b0a7b8
children d0816a914cdc
files get-b43-firmware/receipt get-b43-firmware/stuff/get-b43-firmware get-b43legacy-firmware/receipt get-b43legacy-firmware/stuff/get-b43legacy-firmware get-ipw2100-firmware/receipt get-ipw2100-firmware/stuff/get-ipw2100-firmware get-ipw2200-firmware/receipt get-ipw2200-firmware/stuff/get-ipw2200-firmware
line diff
     1.1 --- a/get-b43-firmware/receipt	Mon Feb 09 14:46:03 2009 +0000
     1.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.3 @@ -1,15 +0,0 @@
     1.4 -# SliTaz package receipt.
     1.5 -
     1.6 -PACKAGE="get-b43-firmware"
     1.7 -VERSION="1.01"
     1.8 -CATEGORY="non-free"
     1.9 -SHORT_DESC="Get Broadcom b43 firmware."
    1.10 -MAINTAINER="pankso@slitaz.org"
    1.11 -WEB_SITE="http://downloads.openwrt.org/"
    1.12 -
    1.13 -# Rules to gen a SliTaz package suitable for Tazpkg.
    1.14 -genpkg_rules()
    1.15 -{
    1.16 -	mkdir -p $fs/usr/bin
    1.17 -	cp stuff/$PACKAGE $fs/usr/bin
    1.18 -}
     2.1 --- a/get-b43-firmware/stuff/get-b43-firmware	Mon Feb 09 14:46:03 2009 +0000
     2.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     2.3 @@ -1,75 +0,0 @@
     2.4 -#!/bin/sh
     2.5 -#
     2.6 -# Get and install non-free Broadcom b43 firmware. The script wil also
     2.7 -# install linux-wireless and b43-fwcutter if needed. Finaly try to
     2.8 -# configure wlan0 interface.
     2.9 -#
    2.10 -
    2.11 -DIR="broadcom-wl"
    2.12 -VERSION=4.80.53.0
    2.13 -TARBALL=$DIR-$VERSION.tar.bz2
    2.14 -WGET_URL="http://downloads.openwrt.org/sources/$TARBALL"
    2.15 -ROOT="$1"
    2.16 -
    2.17 -# Check if user is root to install.
    2.18 -if test $(id -u) != 0 ; then
    2.19 -	echo -e "\nYou must be root to run `basename $0`."
    2.20 -	echo -e "Please use 'su' and root password to become super-user.\n"
    2.21 -	exit 0
    2.22 -fi
    2.23 -
    2.24 -# Avoid reinstall
    2.25 -if [ -d $ROOT/var/lib/tazpkg/installed/b43-firmware ]; then
    2.26 -	echo -e "\nb43-firmware package is already installed.\n"
    2.27 -	exit 0
    2.28 -fi
    2.29 -
    2.30 -# We need drivers, the extractor and tools.
    2.31 -for pkg in linux-wireless b43-fwcutter wireless_tools
    2.32 -do
    2.33 -	if [ ! -d /var/lib/tazpkg/installed/$pkg ]; then
    2.34 -		tazpkg get-install $pkg
    2.35 -	fi
    2.36 -done
    2.37 -
    2.38 -# Get files
    2.39 -cd /tmp
    2.40 -wget $WGET_URL
    2.41 -tar xjf $TARBALL
    2.42 -cd $DIR-$VERSION/kmod
    2.43 -
    2.44 -# Create pseudo package
    2.45 -mkdir -p b43-firmware-$VERSION/fs/lib/firmware
    2.46 -b43-fwcutter -w "b43-firmware-$VERSION/fs/lib/firmware" wl_apsta.o
    2.47 -
    2.48 -# Creat receipt
    2.49 -cat > b43-firmware-$VERSION/receipt <<EOT
    2.50 -PACKAGE="b43-firmware"
    2.51 -VERSION="$VERSION"
    2.52 -CATEGORY="non-free"
    2.53 -SHORT_DESC="Broadcom b43 firmware."
    2.54 -DEPENDS="linux-wireless b43-fwcutter wireless_tools"
    2.55 -WEB_SITE="http://downloads.openwrt.org/"
    2.56 -EOT
    2.57 -
    2.58 -# Pack
    2.59 -tazpkg pack b43-firmware-$VERSION
    2.60 -
    2.61 -# Install pseudo package
    2.62 -tazpkg install b43-firmware-$VERSION.tazpkg --root=$ROOT
    2.63 -
    2.64 -# Clean
    2.65 -cd /tmp
    2.66 -rm -rf $TARBALL $DIR-$VERSION
    2.67 -
    2.68 -# Load b43 module
    2.69 -if [ -z "$ROOT" ]; then
    2.70 -	echo "Loading module: b43..."
    2.71 -	modprobe b43
    2.72 -	sleep 1
    2.73 -fi
    2.74 -
    2.75 -# Configure /etc/network.conf and start connexion
    2.76 -sed -i s/'WIFI="no"'/'WIFI="yes"'/ $ROOT/etc/network.conf
    2.77 -[ -z "$ROOT" ] && /etc/init.d/network.sh restart
    2.78 -
     3.1 --- a/get-b43legacy-firmware/receipt	Mon Feb 09 14:46:03 2009 +0000
     3.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     3.3 @@ -1,15 +0,0 @@
     3.4 -# SliTaz package receipt.
     3.5 -
     3.6 -PACKAGE="get-b43legacy-firmware"
     3.7 -VERSION="1.01"
     3.8 -CATEGORY="non-free"
     3.9 -SHORT_DESC="Get Broadcom b43lagacy firmware."
    3.10 -MAINTAINER="pankso@slitaz.org"
    3.11 -WEB_SITE="http://downloads.openwrt.org/"
    3.12 -
    3.13 -# Rules to gen a SliTaz package suitable for Tazpkg.
    3.14 -genpkg_rules()
    3.15 -{
    3.16 -	mkdir -p $fs/usr/bin
    3.17 -	cp stuff/$PACKAGE $fs/usr/bin
    3.18 -}
     4.1 --- a/get-b43legacy-firmware/stuff/get-b43legacy-firmware	Mon Feb 09 14:46:03 2009 +0000
     4.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     4.3 @@ -1,75 +0,0 @@
     4.4 -#!/bin/sh
     4.5 -#
     4.6 -# Get and install non-free Broadcom b43 firmware. The script wil also
     4.7 -# install linux-wireless and b43-fwcutter if needed. Finaly try to
     4.8 -# configure wlan0 interface.
     4.9 -#
    4.10 -
    4.11 -DIR="wl_apsta"
    4.12 -VERSION=3.130.20.0
    4.13 -TARBALL=$DIR-$VERSION.o
    4.14 -WGET_URL="http://downloads.openwrt.org/sources/$TARBALL"
    4.15 -ROOT="$1"
    4.16 -
    4.17 -# Check if user is root to install.
    4.18 -if test $(id -u) != 0 ; then
    4.19 -	echo -e "\nYou must be root to run `basename $0`."
    4.20 -	echo -e "Please use 'su' and root password to become super-user.\n"
    4.21 -	exit 0
    4.22 -fi
    4.23 -
    4.24 -# Avoid reinstall
    4.25 -if [ -d $ROOT/var/lib/tazpkg/installed/b43legacy-firmware ]; then
    4.26 -	echo -e "\nb43legacy-firmware package is already installed.\n"
    4.27 -	exit 0
    4.28 -fi
    4.29 -
    4.30 -# We need drivers, the extractor and tools.
    4.31 -for pkg in linux-wireless b43-fwcutter wireless_tools
    4.32 -do
    4.33 -	if [ ! -d /var/lib/tazpkg/installed/$pkg ]; then
    4.34 -		tazpkg get-install $pkg
    4.35 -	fi
    4.36 -done
    4.37 -
    4.38 -# Get files
    4.39 -cd /tmp
    4.40 -wget $WGET_URL || exit 
    4.41 -#tar xjf $TARBALL
    4.42 -#cd $DIR-$VERSION/
    4.43 -
    4.44 -# Create pseudo package
    4.45 -mkdir -p b43legacy-firmware-$VERSION/fs/lib/firmware
    4.46 -b43-fwcutter -w "b43legacy-firmware-$VERSION/fs/lib/firmware" wl_apsta-3.130.20.0.o
    4.47 -
    4.48 -# Creat receipt
    4.49 -cat > b43legacy-firmware-$VERSION/receipt <<EOT
    4.50 -PACKAGE="b43legacy-firmware"
    4.51 -VERSION="$VERSION"
    4.52 -CATEGORY="non-free"
    4.53 -SHORT_DESC="Broadcom b43legacy firmware."
    4.54 -DEPENDS="linux-wireless b43-fwcutter wireless_tools"
    4.55 -WEB_SITE="http://downloads.openwrt.org/"
    4.56 -EOT
    4.57 -
    4.58 -# Pack
    4.59 -tazpkg pack b43legacy-firmware-$VERSION
    4.60 -
    4.61 -# Install pseudo package
    4.62 -tazpkg install b43legacy-firmware-$VERSION.tazpkg --root=$ROOT
    4.63 -
    4.64 -# Clean
    4.65 -cd /tmp
    4.66 -rm -rf $TARBALL $DIR-$VERSION
    4.67 -
    4.68 -# Load b43legacy module
    4.69 -if [ -z "$ROOT" ]; then
    4.70 -	echo "Loading module: b43legacy..."
    4.71 -	modprobe b43legacy
    4.72 -	sleep 1
    4.73 -fi
    4.74 -
    4.75 -# Configure /etc/network.conf and start connexion
    4.76 -sed -i s/'WIFI="no"'/'WIFI="yes"'/ $ROOT/etc/network.conf
    4.77 -[ -z "$ROOT" ] && /etc/init.d/network.sh restart
    4.78 -
     5.1 --- a/get-ipw2100-firmware/receipt	Mon Feb 09 14:46:03 2009 +0000
     5.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     5.3 @@ -1,15 +0,0 @@
     5.4 -# SliTaz package receipt.
     5.5 -
     5.6 -PACKAGE="get-ipw2100-firmware"
     5.7 -VERSION="1.0"
     5.8 -CATEGORY="non-free"
     5.9 -SHORT_DESC="Get Intel PRO/Wireless 2100 firmware."
    5.10 -MAINTAINER="pascal.bellard@slitaz.org"
    5.11 -WEB_SITE="http://ipw2100.sourceforge.net//"
    5.12 -
    5.13 -# Rules to gen a SliTaz package suitable for Tazpkg.
    5.14 -genpkg_rules()
    5.15 -{
    5.16 -	mkdir -p $fs/usr/bin
    5.17 -	cp stuff/$PACKAGE $fs/usr/bin
    5.18 -}
     6.1 --- a/get-ipw2100-firmware/stuff/get-ipw2100-firmware	Mon Feb 09 14:46:03 2009 +0000
     6.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     6.3 @@ -1,68 +0,0 @@
     6.4 -# install linux-wireless if needed.
     6.5 -
     6.6 -MODULE=ipw2100
     6.7 -PKG=$MODULE-firmware
     6.8 -VERSION=1.3-6.0.1
     6.9 -SHORT_DESC="Intel PRO/Wireless 2100 firmware."
    6.10 -WEB_SITE="http://$MODULE.sourceforge.net/"
    6.11 -RPM=$PKG-$VERSION.noarch.rpm
    6.12 -WGET_URL="http://dl.atrpms.net/all/$RPM"
    6.13 -ROOT="$1"
    6.14 -
    6.15 -# Check if user is root to install.
    6.16 -if test $(id -u) != 0 ; then
    6.17 -        echo -e "\nYou must be root to run `basename $0`."
    6.18 -	echo -e "Please use 'su' and root password to become super-user.\n"
    6.19 -	exit 0
    6.20 -fi
    6.21 -
    6.22 -# Avoid reinstall
    6.23 -if [ -d $ROOT/var/lib/tazpkg/installed/$PKG ]; then
    6.24 -	echo -e "\n$PKG package is already installed.\n"
    6.25 -	exit 0
    6.26 -fi
    6.27 -
    6.28 -# Get files
    6.29 -TMP=/tmp/$(basename $0)$$
    6.30 -mkdir $TMP
    6.31 -TOP=$PWD
    6.32 -cd $TMP
    6.33 -wget $WGET_URL
    6.34 -rpm2cpio < $RPM | cpio -id
    6.35 -	
    6.36 -# Create pseudo package
    6.37 -mkdir -p $PKG-$VERSION/fs/lib/firmware
    6.38 -rm -f lib/firmware/*LICENSE*
    6.39 -mv lib/firmware/* $PKG-$VERSION/fs/lib/firmware
    6.40 -
    6.41 -# Creat receipt
    6.42 -cat > $PKG-$VERSION/receipt <<EOT
    6.43 -PACKAGE="$PKG"
    6.44 -VERSION="$VERSION"
    6.45 -CATEGORY="non-free"
    6.46 -SHORT_DESC="$SHORT_DESC."
    6.47 -WEB_SITE="$WEB_SITE"
    6.48 -DEPENDS="linux-wireless wireless_tools"
    6.49 -EOT
    6.50 -
    6.51 -# Pack
    6.52 -tazpkg pack $PKG-$VERSION
    6.53 -
    6.54 -# Install pseudo package
    6.55 -tazpkg install $PKG-$VERSION.tazpkg --root=$ROOT
    6.56 -
    6.57 -# Clean
    6.58 -cd $TOP
    6.59 -rm -rf $TMP
    6.60 -
    6.61 -# Load module
    6.62 -if [ -z "$ROOT" ]; then
    6.63 -	echo "Loading module: $MODULE..."
    6.64 -	modprobe $MODULE
    6.65 -	sleep 1
    6.66 -fi
    6.67 -
    6.68 -# Configure /etc/network.conf and start connexion
    6.69 -sed -i s/'WIFI="no"'/'WIFI="yes"'/ $ROOT/etc/network.conf
    6.70 -[ -z "$ROOT" ] && /etc/init.d/network.sh restart
    6.71 -
     7.1 --- a/get-ipw2200-firmware/receipt	Mon Feb 09 14:46:03 2009 +0000
     7.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     7.3 @@ -1,15 +0,0 @@
     7.4 -# SliTaz package receipt.
     7.5 -
     7.6 -PACKAGE="get-ipw2200-firmware"
     7.7 -VERSION="1.0"
     7.8 -CATEGORY="non-free"
     7.9 -SHORT_DESC="Get Intel PRO/Wireless 2200BG firmware."
    7.10 -MAINTAINER="pascal.bellard@slitaz.org"
    7.11 -WEB_SITE="http://ipw2200.sourceforge.net//"
    7.12 -
    7.13 -# Rules to gen a SliTaz package suitable for Tazpkg.
    7.14 -genpkg_rules()
    7.15 -{
    7.16 -	mkdir -p $fs/usr/bin
    7.17 -	cp stuff/$PACKAGE $fs/usr/bin
    7.18 -}
     8.1 --- a/get-ipw2200-firmware/stuff/get-ipw2200-firmware	Mon Feb 09 14:46:03 2009 +0000
     8.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     8.3 @@ -1,68 +0,0 @@
     8.4 -# install linux-wireless if needed.
     8.5 -
     8.6 -MODULE=ipw2200
     8.7 -PKG=$MODULE-firmware
     8.8 -VERSION=3.0-9.0.1
     8.9 -SHORT_DESC="Intel PRO/Wireless 2200BG firmware."
    8.10 -WEB_SITE="http://$MODULE.sourceforge.net/"
    8.11 -RPM=$PKG-$VERSION.noarch.rpm
    8.12 -WGET_URL="http://dl.atrpms.net/all/$RPM"
    8.13 -ROOT="$1"
    8.14 -
    8.15 -# Check if user is root to install.
    8.16 -if test $(id -u) != 0 ; then
    8.17 -        echo -e "\nYou must be root to run `basename $0`."
    8.18 -	echo -e "Please use 'su' and root password to become super-user.\n"
    8.19 -	exit 0
    8.20 -fi
    8.21 -
    8.22 -# Avoid reinstall
    8.23 -if [ -d $ROOT/var/lib/tazpkg/installed/$PKG ]; then
    8.24 -	echo -e "\n$PKG package is already installed.\n"
    8.25 -	exit 0
    8.26 -fi
    8.27 -
    8.28 -# Get files
    8.29 -TMP=/tmp/$(basename $0)$$
    8.30 -mkdir $TMP
    8.31 -TOP=$PWD
    8.32 -cd $TMP
    8.33 -wget $WGET_URL
    8.34 -rpm2cpio < $RPM | cpio -id
    8.35 -	
    8.36 -# Create pseudo package
    8.37 -mkdir -p $PKG-$VERSION/fs/lib/firmware
    8.38 -rm -f lib/firmware/*LICENSE*
    8.39 -mv lib/firmware/* $PKG-$VERSION/fs/lib/firmware
    8.40 -
    8.41 -# Creat receipt
    8.42 -cat > $PKG-$VERSION/receipt <<EOT
    8.43 -PACKAGE="$PKG"
    8.44 -VERSION="$VERSION"
    8.45 -CATEGORY="non-free"
    8.46 -SHORT_DESC="$SHORT_DESC."
    8.47 -WEB_SITE="$WEB_SITE"
    8.48 -DEPENDS="linux-wireless wireless_tools"
    8.49 -EOT
    8.50 -
    8.51 -# Pack
    8.52 -tazpkg pack $PKG-$VERSION
    8.53 -
    8.54 -# Install pseudo package
    8.55 -tazpkg install $PKG-$VERSION.tazpkg --root=$ROOT
    8.56 -
    8.57 -# Clean
    8.58 -cd $TOP
    8.59 -rm -rf $TMP
    8.60 -
    8.61 -# Load module
    8.62 -if [ -z "$ROOT" ]; then
    8.63 -	echo "Loading module: $MODULE..."
    8.64 -	modprobe $MODULE
    8.65 -	sleep 1
    8.66 -fi
    8.67 -
    8.68 -# Configure /etc/network.conf and start connexion
    8.69 -sed -i s/'WIFI="no"'/'WIFI="yes"'/ $ROOT/etc/network.conf
    8.70 -[ -z "$ROOT" ] && /etc/init.d/network.sh restart
    8.71 -