wok-current annotate syslinux/stuff/iso2exe/taziso @ rev 23149

syslinux/taziso: ntfs support
author Pascal Bellard <pascal.bellard@slitaz.org>
date Sun Mar 15 15:33:30 2020 +0100 (2020-03-15)
parents e93e6b4d565f
children d33c3c211ef8
rev   line source
pascal@17635 1 #!/bin/sh
pascal@17635 2
pascal@17635 3 [ $(id -u) -eq 0 ] || exec su -c "$0 $@"
pascal@17635 4
pascal@17635 5 DIALOG=dialog
pascal@17635 6
pascal@17635 7 ddq()
pascal@17635 8 {
pascal@17635 9 dd $@ 2> /dev/null
pascal@17635 10 }
pascal@17635 11
pascal@17635 12 get()
pascal@17635 13 {
pascal@18670 14 od -v -j $1 -N ${4:-${3:-2}} -t u${3:-2} -w${3:-2} -An "$2" 2>/dev/null ||
pascal@21542 15 hexdump -v -s $1 -n ${4:-${3:-2}} -e "\"\" 1/${3:-2} \" %u\n\"" "$2"
pascal@17635 16 }
pascal@17635 17
pascal@17635 18 bytes2bin()
pascal@17635 19 {
pascal@17635 20 for i in $@ ; do
pascal@17635 21 printf '\\\\x%02X' $(($i&255))
pascal@17635 22 done | xargs echo -en
pascal@17635 23 }
pascal@17635 24
pascal@17635 25 words2bin()
pascal@17635 26 {
pascal@17635 27 for i in $@ ; do
pascal@17635 28 printf '\\\\x%02X\\\\x%02X' $(($i&255)) $((($i>>8)&255))
pascal@17635 29 done | xargs echo -en
pascal@17635 30 }
pascal@17635 31
pascal@17635 32 gettazboot()
pascal@17635 33 {
pascal@21542 34 echo -e "\nCreating $(basename $1) ..."
pascal@21542 35 X=$(($(get 20 /mnt/$ISO) - 0xC0))
pascal@21542 36 [ $X -lt 30000 ] && X=$((0x7FF0))
pascal@18670 37 O=$(($(get 64 "$ISO") - 0xC0))
pascal@21542 38 L=$(($X - $(get 24 "$ISO") - $O))
pascal@18140 39 S=$((32+$L))
pascal@18140 40 P=$((($S+511)/512))
pascal@18140 41 E=$((4096-(32*$P)))
pascal@18140 42 words2bin 0x5A4D $(($S%512)) $P 0 2 $E -1 $((${2:-0}-16)) \
pascal@18140 43 -2 0 256 -16 28 0x6C53 0x5469 0x7A61 > $1
pascal@21542 44 ddq bs=1 count=$(echo $L) skip=$(echo $O) if="$ISO" >> $1
pascal@17635 45 }
pascal@17635 46
pascal@17635 47 uncpio()
pascal@17635 48 {
pascal@17635 49 [ -s "$1" ] || return
pascal@17635 50 echo -en "\n Extracting $(basename $1) ..."
pascal@17635 51 case $(get 0 $1) in
pascal@17635 52 *35615) ( zcat || gunzip ) ;;
pascal@17635 53 *14333) unxz ;;
pascal@17635 54 *\ 93) unlzma ;;
pascal@17635 55 *) cat ;;
pascal@17635 56 esac < $1 | ( cd ${2:-/} ; cpio -idmu > /dev/null 2>&1 )
pascal@17635 57 }
pascal@17635 58
pascal@17635 59 dotwait()
pascal@17635 60 {
pascal@17635 61 echo -n "${1:-Install filesystem}.."
pascal@17635 62 touch /tmp/wait
pascal@17930 63 [ "$REQUEST_URI" ] && return
pascal@17635 64 while [ -e /tmp/wait ]; do
pascal@17635 65 echo -n "." > /dev/tty
pascal@17635 66 sleep 1
pascal@17635 67 done &
pascal@17635 68 }
pascal@17635 69
pascal@17635 70 getuuid()
pascal@17635 71 {
pascal@17635 72 dev=$(mount | sed "/ $(echo $mnt | sed 's|/|\\/|g') /!d;s/ .*//;s|/dev/||;q")
pascal@17635 73 [ "$dev" ] &&
pascal@17635 74 blkid | sed "/$dev:/!d;s/.* UUID=.\\([^ ]*\\)\".*/\\1/" ||
pascal@17635 75 echo "/dev/hda1"
pascal@17635 76 }
pascal@17635 77
pascal@17635 78 tazusbinitfs()
pascal@17635 79 {
pascal@17635 80 PAD=$(($(stat -c %s $1) % 4))
pascal@17635 81 [ $PAD -ne 0 ] && ddq if=/dev/zero bs=1 count=$((4 - $PAD)) >> $1
pascal@17635 82 mkdir -p /tmp/fs$$/etc /tmp/fs$$/lib /tmp/fs$$/home
pascal@21542 83 cp -a /etc/locale.conf /etc/locale.conf /tmp/fs$$/etc 2> /dev/null
pascal@17635 84 cat > /tmp/fs$$/init1 <<EOT
pascal@17635 85 #!/bin/sh
pascal@17635 86 sed -i 's|sbin/init|init2|' /init
pascal@17635 87 exec /init
pascal@17635 88 EOT
pascal@17635 89 cat > /tmp/fs$$/init2 <<EOT
pascal@17635 90 #!/bin/sh
pascal@17635 91
pascal@17635 92 mount -t proc /proc /proc
pascal@21542 93 for i in /lib/modules/*.ko* ; do insmod \$i 2> /dev/null ; done; sleep 2
pascal@17635 94 v=\$(sed '/\\/home=/!d;s|.*/home=\\([^ ]*\\).*|\\1|' /proc/cmdline /cmdline 2> /dev/null)
pascal@17635 95 mount / -o remount,rw
pascal@17635 96 mkdir /mnt/dos
pascal@17635 97 rm -f /cmdline 2> /dev/null
pascal@17635 98 mount / -o remount,ro
pascal@17635 99 mnt=/mnt/dos/\${v#*/}
pascal@17635 100 dev=\$( (blkid /dev/[sh]d* || blkid) | grep \${v%%/*} | sed 's/:.*//;q')
pascal@17635 101 echo "Mount \$dev in /mnt/dos for \$v..." | tee -a /run/boot.log
pascal@17635 102 mount \$dev /mnt/dos
pascal@17635 103 if [ ! -d /mnt/dos/slitaz ]; then
pascal@17635 104 umount /mnt/dos 2> /dev/null
pascal@17635 105 (blkid /dev/[sh]d* || blkid) | while read dev line; do
pascal@17635 106 case "\$line" in
pascal@17635 107 *ntfs*|*vfat*|*msdos*) ;;
pascal@17635 108 *) continue ;;
pascal@17635 109 esac
pascal@17635 110 mount \${dev%:} /mnt/dos
pascal@17635 111 [ -d /mnt/dos/slitaz ] && break
pascal@17635 112 umount /mnt/dos
pascal@17635 113 done
pascal@17635 114 fi
pascal@17932 115 $([ "$2" ] || echo '# ')mount.posixovl -F \$mnt -- -oallow_other -odefault_permissions -osuid
pascal@17635 116 mount --bind \$mnt /home
pascal@21542 117 mount -o size=0,ro -t tmpfs tmpfs \$mnt
pascal@17635 118 umount /proc
pascal@17635 119 exec /sbin/init
pascal@17635 120 EOT
pascal@17635 121 chmod 755 /tmp/fs$$/init?
pascal@21542 122 ln -s /sqfs/bin/gzip /bin 2> /dev/null
pascal@17635 123 ( cd /tmp/fs$$ ; find * | cpio -o -H newc ) | gzip -9 >> $1
pascal@17635 124 rm -rf /tmp/fs$$
pascal@17635 125 }
pascal@17635 126
pascal@17635 127 mkinitrd()
pascal@17635 128 {
pascal@17635 129 echo -en "\nCreating $(basename $1) "
pascal@17635 130 fs=/tmp/fs$$
pascal@17635 131 for i in bin lib dev proc tmp mnt etc ; do
pascal@17635 132 mkdir -p $fs/$i
pascal@17635 133 done
pascal@21542 134 for i in /dev/null /dev/tty /dev/tty[012] /dev/fuse /dev/[hs]d* \
pascal@21542 135 /dev/console ; do
pascal@17635 136 cp -a $2$i $fs/dev/
pascal@17635 137 done
pascal@23149 138 for i in /bin/busybox $(which mount.posixovl) $(which blkid) \
pascal@23149 139 $(which ntfs-3g); do
pascal@17635 140 cp $(LD_TRACE_LOADED_OBJECTS=1 /lib/ld*.so $i | \
pascal@17635 141 sed 's|.*=> \(.*/lib/l[^ ]*\).*|\1|;/^\//!d') $fs/lib
pascal@17635 142 cp $i $fs/bin
pascal@17635 143 done
pascal@21542 144 cp -a /sqfs/lib/ld-* /tmp/fs/lib 2> /dev/null ||
pascal@17635 145 cp -a /lib/ld-* $fs/lib
pascal@17635 146 for i in $(busybox | sed '/Current/,$!d'); do
pascal@17635 147 [ -e $fs/bin/${i%,} ] || ln -s busybox $fs/bin/${i%,}
pascal@17635 148 done
pascal@17635 149 ln -s /proc/mounts $fs/etc/mtab
pascal@17635 150 sed 's/ .*//' /proc/modules | while read mod ; do
pascal@17635 151 find /lib/modules/ | grep $mod.ko | \
pascal@17635 152 sed 's|.*|cp & $fs/lib|' | sh
pascal@17635 153 done
pascal@17635 154 cat > $fs/init <<EOT
pascal@17635 155 #!/bin/sh
pascal@17635 156
pascal@17635 157 arg()
pascal@17635 158 {
pascal@17635 159 grep -q \$1 /proc/cmdline &&
pascal@17635 160 val="\$(sed "s/.*\$1=\\([^ ]*\\).*/\\1/" < /proc/cmdline)" &&
pascal@17635 161 echo "\$2 \$val"
pascal@17635 162 }
pascal@17635 163
pascal@17635 164 mount -t proc /proc /proc
pascal@17635 165 arg debug "shell" && debug=true && set -x
pascal@17635 166 for i in /lib/*.ko* ; do insmod \$i 2> /dev/null ; done; sleep 2
pascal@17635 167 arg mount "Mount device"
pascal@23149 168 dsk=\$( (blkid /dev/[sh]d* || blkid) | grep \$val | sed 's/:.*//;q')
pascal@23149 169 mount \$dsk /mnt || mount.ntfs \$dsk /mnt
pascal@17635 170 arg subroot "Change root to directory"
pascal@17635 171 if [ -d /mnt/\$val ]; then
pascal@17635 172 umount /mnt 2> /dev/null
pascal@17635 173 (blkid /dev/[sh]d* || blkid) | while read dev line; do
pascal@17635 174 case "\$line" in
pascal@17635 175 *ntfs*|*vfat*|*msdos*) ;;
pascal@17635 176 *) continue ;;
pascal@17635 177 esac
pascal@17635 178 mount \${dev%:} /mnt
pascal@17635 179 [ -d /mnt/\$val ] && break
pascal@17635 180 umount /mnt
pascal@17635 181 done
pascal@17635 182 fi
pascal@23149 183
pascal@23149 184 $([ "$3" ] || echo -n '# ')mount.posixovl -F /mnt/\$val -- -oallow_other -odefault_permissions -osuid
pascal@17635 185 mount --bind /mnt /mnt/\$val/mnt/dos
pascal@21542 186 mount -o size=0,ro -t tmpfs tmpfs /mnt/\$val/mnt/dos/\$val
pascal@17635 187 LDSO=\$(ls /mnt/\$val/lib/ld-* | sed q)
pascal@17635 188 export LD_LIBRARY_PATH=\$val/lib:\$val/usr/lib:/lib
pascal@17635 189 [ "$debug" = "true" ] && sh
pascal@17635 190 umount /proc
pascal@17635 191 exec /bin/switch_root /mnt \${LDSO#/mnt/} \$val/usr/sbin/chroot \$val /sbin/init
pascal@17635 192 EOT
pascal@17635 193 chmod +x $fs/init
pascal@17635 194 ( cd $fs ; find * | cpio -o -H newc ) | lzma e $1 -si 2> /dev/null
pascal@17635 195 rm -rf $fs /tmp/wait
pascal@17635 196 }
pascal@17635 197
pascal@17635 198 ls_r()
pascal@17635 199 {
pascal@17635 200 ls -r $@ 2> /dev/null || ls $@
pascal@17635 201 }
pascal@17635 202
pascal@17635 203 doinstall()
pascal@17635 204 {
pascal@17932 205 unset useposixovl
pascal@17934 206 blkid | grep $(df $mnt | sed '$!d;s/ .*/:/') | \
pascal@17932 207 grep -qiE "(msdos|vfat|ntfs)" && useposixovl=YES
pascal@19029 208 case "$mnt" in
pascal@19029 209 *mkzip*) useposixovl=YES
pascal@19029 210 esac
pascal@17635 211 mkdir -p $mnt/slitaz/boot $mnt/slitaz/mnt/dos
pascal@17932 212 [ "$useposixovl" ] &&
pascal@17635 213 if ! mount.posixovl -F $mnt/slitaz -- \
pascal@17635 214 -oallow_other -odefault_permissions -osuid; then
pascal@17635 215 echo "Can't install SliTaz. Abort."
pascal@17635 216 sleep 5
pascal@17635 217 return 1
pascal@17635 218 fi
pascal@17635 219 dotwait "Install root filesystem in /slitaz.."
pascal@17635 220 if [ "$1" ]; then
pascal@18240 221 ls_r $media/boot/rootfs*gz | \
pascal@17635 222 xargs cat > $mnt/slitaz/boot/rootfs.gz
pascal@17932 223 tazusbinitfs $mnt/slitaz/boot/rootfs.gz $useposixovl
pascal@17635 224 initrd=rootfs.gz
pascal@17635 225 extraargs="/home=$(getuuid)/slitaz rdinit=/init1"
pascal@17635 226 else
pascal@18240 227 for i in $(ls_r $media/boot/rootfs*gz); do
pascal@17635 228 uncpio $i $mnt/slitaz
pascal@17635 229 done
pascal@17635 230 for i in $packages_list; do
pascal@17635 231 tazpkg get-install $i --root=$mnt/slitaz
pascal@17635 232 done
pascal@17635 233 for i in $packages_dir/*.tazpkg; do
pascal@17635 234 [ -s "$i" ] &&
pascal@17635 235 tazpkg install $i --root=$mnt/slitaz
pascal@17635 236 done
pascal@17635 237 cp -a /etc/locale.conf $mnt/slitaz/etc 2> /dev/null
pascal@17635 238 cp -a /etc/keymap.conf $mnt/slitaz/etc 2> /dev/null
pascal@17932 239 mkinitrd $mnt/slitaz/boot/initrd $mnt/slitaz $useposixovl
pascal@17635 240 initrd=initrd
pascal@17635 241 extraargs="mount=$(getuuid) subroot=slitaz"
pascal@17635 242 fi
pascal@17635 243 echo -en "\nInstall boot files..."
pascal@20158 244 for i in $media/boot/bzImage* $media/boot/*pxe* \
pascal@18240 245 $media/boot/isolinux/he* $media/boot/isolinux/opt* \
pascal@18240 246 $media/README $media/boot/memtest* ; do
pascal@17635 247 [ -s $i ] && cp $i $mnt/slitaz/boot
pascal@17635 248 done
pascal@21542 249 for i in $mnt/slitaz/boot/memtest $mnt/slitaz/boot/*pxe ; do
pascal@17635 250 [ $(get 0 $i 2> /dev/null || echo 0) -eq 23117 ] &&
pascal@17635 251 mv $i $i.exe
pascal@17635 252 done
pascal@20158 253 bzimage=$(cd $mnt/slitaz/boot ; ls bzimage*)
pascal@21542 254 cp /etc/keymap.conf /etc/locale.conf $mnt/slitaz/etc 2> /dev/null
pascal@20158 255 gettazboot $mnt/slitaz/boot/tazboot.exe # autoappend 64 suffix
pascal@17635 256 unix2dos > $mnt/slitaz/boot/tazboot.cmd <<EOT
pascal@17635 257 kernel=/slitaz/boot/bzimage
pascal@17635 258 initrd=/slitaz/boot/$initrd
pascal@21822 259 $extraargs autologin
pascal@17635 260 EOT
pascal@21553 261 uudecode - <<EOT | gunzip > $mnt/slitaz/boot/slitaz.pif
pascal@21553 262 begin-base64 644 -
pascal@21553 263 H4sIAAAAAAACA8XPxUHGMBTA8X9ecb/glgFwv+FO23zeI+7ucMFhCjZgEEZh
pascal@21553 264 Ctzd4Rf3PFbtQHGLG9BmfmZqdlE/tSmw2LfePzOzWDK0OsQXpPHvFGfZBmL5
pascal@21553 265 f3Zns98NuG1BbTrbWj0OFMypSKfT4kYCurKuRleWlBEth2qUTYFBKjg746pI
pascal@21553 266 2nZaIT/v9vWwbeuqi9fPznLlSPFLLuK22/0lLT09/BDhXgWKO1f9aLKxOObE
pascal@21553 267 EhLuVvO4FksSwaH5qbHpvkle0TyzND82NK+doRVeZgGGbIw0XD2QwV9SnAN/
pascal@21553 268 ACxDxwMAAA==
pascal@21553 269 ====
pascal@21553 270 EOT
pascal@17635 271 unix2dos $mnt/slitaz/boot/he* $mnt/slitaz/boot/opt* \
pascal@17635 272 $mnt/slitaz/boot/README
pascal@17635 273 [ -d $mnt/slitaz/usr/sbin -a ! -x $mnt/slitaz/usr/sbin/mount.posixovl ] &&
pascal@17635 274 cp $(which mount.posixovl) $mnt/slitaz/usr/sbin
pascal@19033 275 if [ "$useposixovl" ] && grep -qs " $mnt " /proc/mounts &&
pascal@17932 276 [ ! -d $mnt/boot/grub ]; then
pascal@17929 277 mkdir -p $mnt/boot/grub
pascal@17930 278 echo -en "\nInstall grub in /boot/grub..."
pascal@17929 279 cp -a /usr/lib/grub/*/* $mnt/boot/grub
pascal@17929 280 cat > $mnt/boot/grub/menu.lst <<EOT
pascal@17929 281 # /boot/grub/menu.lst: GRUB boot loader configuration.
pascal@17929 282
pascal@17929 283 # By default, boot the first entry.
pascal@17929 284 default 0
pascal@17929 285
pascal@17929 286 # Boot automatically after 8 secs.
pascal@17929 287 timeout 8
pascal@17929 288
pascal@17929 289 title Microsoft Windows
pascal@17929 290 chainloader +1
pascal@17929 291
pascal@17929 292 EOT
pascal@17929 293 dev=$(grep " $mnt " /proc/mounts | awk '{ print $1 }')
pascal@17929 294 base=${dev//[0-9]/}
pascal@17929 295 dd if=$base bs=32k count=1 of=$mnt/boot/grub/$(basename $base)
pascal@17929 296 cat > $mnt/boot/grub/uninstall-grub.sh <<EOT
pascal@17929 297 #!/bin/sh
pascal@17929 298
pascal@17929 299 [ -s /boot/grub/$(basename $base) ] &&
pascal@17929 300 dd if=/boot/grub/$(basename $base) of=$base
pascal@17929 301 EOT
pascal@17929 302 grub-install --no-floppy --root-directory=$mnt $base
pascal@17929 303 fi
pascal@17932 304 if [ -s $mnt/boot/grub/menu.lst ] &&
pascal@20158 305 ! grep -q /slitaz/boot/$bzimage $mnt/boot/grub/menu.lst; then
pascal@20158 306 echo -en "\nUpdate /boot/grub/menu.lst..."
pascal@17932 307 cat >> $mnt/boot/grub/menu.lst <<EOT
pascal@17932 308 title SliTaz GNU/Linux $(cat $mnt/slitaz/etc/slitaz-release)
pascal@21822 309 kernel /slitaz/boot/$bzimage $extraargs autologin
pascal@17932 310 initrd /slitaz/boot/$initrd
pascal@17932 311
pascal@17932 312 EOT
pascal@17932 313 fi
pascal@17635 314 rm -f /tmp/wait
pascal@17932 315 [ "$useposixovl" ] && umount $mnt/slitaz
pascal@17635 316 return 0
pascal@17635 317 }
pascal@17635 318
pascal@17635 319 windev()
pascal@17635 320 {
pascal@17924 321 if [ -b "$1" ]; then
pascal@17924 322 device=$1
pascal@17928 323 elif [ "$1" ]; then
pascal@17932 324 echo "Invalid Linux/Windows partition"
pascal@17928 325 return 1
pascal@17924 326 else
pascal@17932 327 DEV="$(blkid | grep -iE "(msdos|vfat|ntfs|ext[234]|xfs|btrfs)" | sed 's/:.*//;s|/dev/||')"
pascal@17924 328 [ "$DEV" ] || return
pascal@17635 329 cat > /tmp/dialog$$ <<EOT
pascal@20771 330 $DIALOG --clear --title " Select your Linux/Windows partition " \
pascal@17932 331 --menu "\nPlease select the Linux/Windows partition according to its known size.
pascal@20771 332 The data will be kept untouched.\n" 17 70 8 \
pascal@17635 333 $(for i in $DEV ; do
pascal@17635 334 label="$(blkid | sed "/$i:/!d;s/.*://;s/[^ ]*UUID=[^ ]* //g;s/LABEL=//")"
pascal@17635 335 echo -n "/dev/$i \"$(($(cat /sys/block/*/$i/size)/2048))MB $label\" "
pascal@17635 336 done)
pascal@17635 337 EOT
pascal@17924 338 exec 3>&1
pascal@17924 339 [ $? -eq 0 ] || return
pascal@17924 340 device=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17924 341 exec 3>&-
pascal@17924 342 rm -f /tmp/dialog$$
pascal@17924 343 fi
pascal@17635 344 mnt=/tmp/mnt$$
pascal@17635 345 mkdir -p $mnt && mount $device $mnt
pascal@17635 346 }
pascal@17635 347
pascal@17635 348 extra_packages()
pascal@17635 349 {
pascal@17635 350 packages_list=
pascal@17635 351 packages_dir=
pascal@20771 352 $DIALOG --clear --title " Extra packages " \
pascal@17635 353 --defaultno --yesno \
pascal@20771 354 "Do you want to add extra packages ?" 7 70
pascal@17635 355 [ $? -eq 0 ] || return
pascal@17635 356 [ -s /var/lib/tazpkg/packages.txt ] || tazpkg recharge
pascal@18240 357 if [ -s $media/boot/vmlinuz-$(uname -r) ]; then
pascal@17635 358 cat > /tmp/dialog$$ <<EOT
pascal@20771 359 $DIALOG --clear --title " Select the packages " \
pascal@17635 360 --separate-output \
pascal@17635 361 --cancel-label "Skip" \
pascal@17635 362 --checklist "Please select the packages you want to install. Try with the first letter." \
pascal@18240 363 0 0 0 \\
pascal@17635 364 EOT
pascal@17635 365 awk -F\| '{ printf "%s \"%s\" off ",$1,$3 }' \
pascal@17635 366 /var/lib/tazpkg/packages.desc >> /tmp/dialog$$
pascal@17635 367 sh /tmp/dialog$$ 2> /tmp/dialog.out$$
pascal@17635 368 [ $? -eq 0 ] && packages_list="$(cat /tmp/dialog.out$$)"
pascal@17635 369 fi
pascal@17635 370 cat > /tmp/dialog$$ <<EOT
pascal@17635 371 $DIALOG --clear \
paul@17671 372 --title "Please select the directory with every custom package to install." \
pascal@20771 373 --cancel-label "Skip" --dselect $PWD 13 78
pascal@17635 374 EOT
pascal@17635 375 sh /tmp/dialog$$ 2> /tmp/dialog.out$$
pascal@17635 376 [ $? -eq 0 ] && packages_dir="$(cat /tmp/dialog.out$$)"
pascal@17635 377 rm -f /tmp/dialog$$ /tmp/dialog.out$$
pascal@17635 378 }
pascal@17635 379
pascal@17635 380 _install()
pascal@17635 381 {
pascal@17635 382 extra_packages
pascal@20771 383 $DIALOG --clear --title " SliTaz UMSDOS way installation " \
pascal@17635 384 --yes-label "Install" --yesno \
pascal@17635 385 "\nSliTaz will be installed in the subdirectory \\slitaz of the current
paul@17935 386 Linux/DOS/Windows partition. You can see your files from /mnt/dos.\n\n
pascal@17635 387 You can start SliTaz with \\slitaz\\boot\\tazboot.exe\n\n
pascal@17635 388 To uninstall SliTaz, you have only to remove this directory.
pascal@17635 389 The file \\boot.ini or \\config.sys may be modified too.\n\n
pascal@20771 390 SliTaz may run slowly on the 'UMSDOS way' installation due to the
pascal@17635 391 posixovl filesystem. The 'TAZUSB way' installation runs faster.\n\n
pascal@17635 392 To do a traditional installation with disk partitioning,
pascal@20771 393 start SliTaz Live with the 'SliTaz RAM boot' menu.\n" 19 70
pascal@17635 394 [ $? -eq 0 ] || return
pascal@17635 395 doinstall
pascal@17635 396 }
pascal@17635 397
pascal@17635 398 readtazbootconf()
pascal@17635 399 {
pascal@17635 400 kernel="$(sed '/^kernel=/!d;s/.*=//' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 401 initrd="$(sed '/^initrd=/!d;s/.*=//' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 402 cmdline="$(sed '/^kernel=/d;/^initrd=/d' $mnt/slitaz/boot/tazboot.cmd)"
pascal@17635 403 }
pascal@17635 404
pascal@17635 405 bootinstalled()
pascal@17635 406 {
pascal@17635 407 [ "$(which kexec)" ] || return
pascal@17635 408 [ -x $mnt/slitaz$1 ] || return
pascal@17635 409 [ -s $mnt/slitaz/boot/tazboot.cmd ] || return
pascal@17635 410 readtazbootconf
pascal@17659 411 kexec -l $kernel --initrd $initrd --command-line "$cmdline" || return
pascal@17635 412 umount $mnt
pascal@17635 413 rm -rf $mnt
pascal@18240 414 quit "kexec -e"
pascal@17635 415 }
pascal@17635 416
pascal@17635 417 mkzip()
pascal@17635 418 {
pascal@17635 419 device=
pascal@17635 420 packages_list=
pascal@17635 421 packages_dir=
pascal@19029 422 mnt=/tmp/mkzipmnt$$
pascal@17635 423 mkdir -p $mnt
pascal@17930 424 $1 $2 || return
pascal@18140 425 for i in bootlace.com grubinst.exe grldr ; do
pascal@18140 426 wget -O $mnt/slitaz/boot/$i http://mirror.slitaz.org/boot/$i
pascal@18140 427 done
pascal@17635 428 readtazbootconf
pascal@17636 429 cat > $mnt/slitaz/boot/menu.lst <<EOT
pascal@17635 430 title SliTaz
pascal@17635 431 kernel $kernel $cmdline
pascal@17635 432 initrd $initrd
pascal@17635 433
pascal@17635 434 EOT
pascal@17635 435 while read file title; do
pascal@17637 436 file=$(ls $mnt/slitaz/boot/*$file* 2> /dev/null)
pascal@17637 437 [ -s "$file" ] && cat >> $mnt/slitaz/boot/menu.lst <<EOT
pascal@17635 438 title $title
pascal@17637 439 kernel ${file#$mnt}
pascal@17635 440
pascal@17635 441 EOT
pascal@17635 442 done <<EOT
pascal@17635 443 memtest MemTest
pascal@17635 444 pxe Web boot
pascal@17635 445 EOT
pascal@17636 446 unix2dos $mnt/slitaz/boot/menu.lst
pascal@17636 447 unix2dos > $mnt/slitaz/boot/install.txt <<EOT
pascal@17659 448 For DOS users (real mode only):
pascal@17659 449
pascal@17659 450 Start SliTaz with \\slitaz\\boot\\tazboot.exe
pascal@17659 451
pascal@17659 452
pascal@17635 453 For NT/2000/XP users:
pascal@17635 454
pascal@17635 455 1- Move the files grldr and menu.lst into the root directory
pascal@17635 456
pascal@17635 457 C:\\> copy \\slitaz\\boot\\grldr \\
pascal@17635 458 C:\\> copy \\slitaz\\boot\\menu.lst \\
pascal@17635 459
pascal@17635 460 2- Remove boot.ini attributes
pascal@17635 461
pascal@17635 462 C:\\> attrib -r -h -s boot.ini
pascal@17635 463
pascal@17635 464 3- Append the following line to boot.init
pascal@17635 465
pascal@17635 466 C:\\grldr="slitaz"
pascal@17635 467
pascal@17635 468 4- Restore boot.ini attributes
pascal@17635 469
pascal@17635 470 C:\\> attrib +r +h +s boot.ini
pascal@17635 471
pascal@17635 472 See http://diddy.boot-land.net/grub4dos/files/README_GRUB4DOS.txt
pascal@18140 473 and http://xpt.sourceforge.net/techdocs/nix/disk/boot/boot07-GrubForDosInfo/ar01s03.html
pascal@17635 474 EOT
pascal@18140 475 ( cd $mnt ; echo 'See \slitaz\boot\install.txt to launch SliTaz.' | \
pascal@18670 476 zip -zr9 $(basename "$ISO" .iso).zip slitaz )
pascal@19033 477 [ "$(which advzip)" ] &&
pascal@19033 478 echo "Recompressing $(basename "$ISO" .iso).zip ..." &&
pascal@19033 479 advzip -z4 $mnt/*.zip
pascal@17635 480 mv $mnt/*.zip .
pascal@19029 481 du -h $PWD/$(basename "$ISO" .iso).zip
pascal@17636 482 umount $mnt
pascal@17636 483 rm -rf $mnt
pascal@17635 484 }
pascal@17635 485
pascal@17635 486 install()
pascal@17635 487 {
pascal@17924 488 windev $1 || return
pascal@17635 489 packages_list=
pascal@17635 490 packages_dir=
pascal@17924 491 if [ "$1" ]; then
pascal@17924 492 doinstall
pascal@17924 493 else
pascal@17924 494 _install && bootinstalled /sbin/init
pascal@17924 495 fi
pascal@17635 496 umount $mnt
pascal@17635 497 rm -rf $mnt
pascal@17635 498 }
pascal@17635 499
pascal@17635 500 inst2zip()
pascal@17635 501 {
pascal@17924 502 if [ "$1" ]; then
pascal@17930 503 mkzip doinstall
pascal@17924 504 else
pascal@17924 505 mkzip _install
pascal@17924 506 fi
pascal@17635 507 }
pascal@17635 508
pascal@17635 509 _installtaz()
pascal@17635 510 {
pascal@20771 511 $DIALOG --clear --title " SliTaz TAZUSB way installation " \
pascal@17635 512 --yes-label "Install" --yesno \
pascal@17635 513 "\nSliTaz will be installed in the subdirectory \\slitaz of the current
paul@17935 514 Linux/DOS/Windows partition. You can see your files from /mnt/dos.\n\n
pascal@17635 515 You can start SliTaz with \\slitaz\\boot\\tazboot.exe\n\n
pascal@17635 516 To uninstall SliTaz, you have only to remove this directory.
pascal@17635 517 The file \\boot.ini or \\config.sys may be modified too.\n\n
pascal@17635 518 The filesystem is loaded entirely into memory upon boot to
paul@19451 519 increase responsiveness. Only /home lands on the hard disk.\n\n
pascal@17635 520 To do a traditional installation with disk partitioning,
pascal@20771 521 start SliTaz Live with the 'SliTaz RAM boot' menu.\n" 19 70
pascal@17635 522 [ $? -eq 0 ] || return
pascal@17635 523 doinstall tazusblike
pascal@17635 524 }
pascal@17635 525
pascal@17635 526 installtaz()
pascal@17635 527 {
pascal@17924 528 windev $1 || return
pascal@17635 529 packages_list=
pascal@17635 530 packages_dir=
pascal@17924 531 if [ "$1" ]; then
pascal@17924 532 doinstall tazusblike
pascal@17924 533 else
pascal@17924 534 _installtaz && bootinstalled /boot/bzimage
pascal@17924 535 fi
pascal@17635 536 umount $mnt
pascal@17635 537 rm -rf $mnt
pascal@17635 538 }
pascal@17635 539
pascal@17635 540 insttaz2zip()
pascal@17635 541 {
pascal@17924 542 if [ "$1" ]; then
pascal@17930 543 mkzip doinstall tazusblike
pascal@17924 544 else
pascal@17924 545 mkzip _installtaz
pascal@17924 546 fi
pascal@17635 547 }
pascal@17635 548
pascal@17635 549 bootiso()
pascal@17635 550 {
pascal@18799 551 cd /tmp
pascal@18240 552 for i in $(ls_r $media/boot/rootfs*gz); do
pascal@17635 553 grep -q ' lm ' /proc/cpuinfo && [ -s ${i}64 ] && i=${i}64
pascal@17635 554 cat $i
pascal@17635 555 n=$((4 - ($(stat -c %s $i) % 4)))
pascal@17635 556 [ $n -eq 4 ] || dd if=/dev/zero bs=1 count=$n
pascal@18799 557 done > initrd$$
pascal@21822 558 cmdline="autologin lang=$LANG"
pascal@18799 559 [ -s /etc/keymap.conf ] && cmdline="$cmdline kmap=$(cat /etc/keymap.conf)"
pascal@18799 560 [ -s /etc/TZ ] && cmdline="$cmdline tz=$(cat /etc/TZ)"
pascal@18799 561 rm -f cmdline initrd 2> /dev/null
pascal@18799 562 getcustomconf kexec >/dev/null
pascal@18799 563 [ -s cmdline ] && cmdline="$cmdline $(cat cmdline)" && rm cmdline
pascal@18799 564 [ -s initrd ] && cat initrd >> initrd$$ && rm initrd
pascal@18240 565 kernel=$media/boot/bzImage
pascal@17635 566 grep -q ' lm ' /proc/cpuinfo && [ -s ${kernel}64 ] && kernel=${kernel}64
pascal@17635 567 . /etc/locale.conf
pascal@18799 568 kexec -l $kernel --initrd initrd$$ --command-line "$cmdline" &&
pascal@18799 569 rm -f initrd$$
pascal@18240 570 quit "kexec -e"
pascal@17635 571 }
pascal@17635 572
pascal@17635 573 tazboot()
pascal@17635 574 {
pascal@17928 575 if [ -z "$1" ]; then
pascal@20771 576 $DIALOG --clear --title " SliTaz bootloader for DOS " \
pascal@17928 577 --yes-label "Install" --yesno \
pascal@17635 578 "\nThe file TAZBOOT.EXE will be created in the top directory. It supports
pascal@17635 579 any linux kernel, multiple initramfs, a kernel command line and
pascal@17635 580 an ISO image file loopback (retrieves files from an ISO file).\n\n
pascal@20771 581 Usage: tazboot.exe [[@commands]|[kernel=<bzimage>]
pascal@17635 582 [initrd=<rootfs>[,<rootfs2>...]] [bootfrom=<isofile>] cmdline args ...]\n\n
pascal@17635 583 Defaults: tazboot @tazboot.cmd or tazboot kernel=bzImage auto\n\n\
pascal@17635 584 Examples for tazboot.cmd:\n\n\
pascal@17635 585 bootfrom=\\isos\\slitaz-4.0.iso\n\
pascal@17635 586 kernel=boot/bzImage\n\
pascal@17635 587 initrd=boot/rootfs4.gz,boot/rootfs3.gz,boot/rootfs2.gz,boot/rootfs1.gz\n\
pascal@21822 588 autologin\n\n\
pascal@17635 589 kernel=\\slitaz\\vmlinuz root=/dev/sda5 ro\n\n
pascal@20771 590 Unlike GRUB4DOS, it doesn't require unfragmented ISO image files.\n" 0 0
pascal@17928 591 [ $? -eq 0 ] || return
pascal@17928 592 fi
pascal@17635 593 gettazboot tazboot.exe
pascal@19029 594 du -h $PWD/tazboot.exe
pascal@17635 595 }
pascal@17635 596
pascal@17635 597 md5()
pascal@17635 598 {
pascal@17635 599 dotwait "Checking files"
pascal@19432 600 ( cd $media ; ${md5sum:-md5sum -c md5sum*} 2>&1 | sort ) > /tmp/data
pascal@17928 601 unset md5sum
pascal@17635 602 rm -f /tmp/wait
pascal@17928 603 if [ "$1" ]; then
pascal@17924 604 cat /tmp/data
pascal@17924 605 else
pascal@20771 606 $DIALOG --clear --title " Checked files " \
pascal@18240 607 --textbox /tmp/data 0 0
pascal@17924 608 fi
pascal@17635 609 rm -f /tmp/data
pascal@17635 610 }
pascal@17635 611
pascal@17635 612 gotcdfile()
pascal@17635 613 {
pascal@18240 614 for i in "$media/$1" "$media/*/$1" "$media/*/isolinux/$1" ; do
pascal@17635 615 file=$(ls $i 2> /dev/null | sed q)
pascal@17635 616 [ -s "$file" ] && break
pascal@17635 617 done
pascal@17635 618 }
pascal@17635 619
pascal@17635 620 sha()
pascal@17635 621 {
pascal@17635 622 gotcdfile 'sha*sum*'
pascal@17635 623 sha=$(basename $file)
pascal@18240 624 md5sum="${sha%sum*}sum -c ${file#$media/}"
pascal@17928 625 md5 $@
pascal@17635 626 }
pascal@17635 627
pascal@17635 628 readme()
pascal@17635 629 {
pascal@17635 630 gotcdfile 'README*'
pascal@17924 631 if [ "$1" ]; then
pascal@17924 632 cat $file
pascal@17924 633 else
pascal@20771 634 $DIALOG --clear --title " Readme " --textbox $file 0 0
pascal@17924 635 fi
pascal@17635 636 }
pascal@17635 637
pascal@17635 638 bzimage()
pascal@17635 639 {
pascal@17928 640 if [ -z "$1" ]; then
pascal@20771 641 $DIALOG --clear --title " Create linux.exe ? " \
pascal@17924 642 --yes-label "Install" --yesno \
pascal@17635 643 "\nLinux.exe launches the linux kernel under DOS (in real mode only).
pascal@17635 644 The cmdline arguments are supported except initrd=,
pascal@17635 645 vga= (you can try 'rdev -v') and mem= (partially).
pascal@20771 646 \nExample:\nC:\\> linux.exe root=/dev/hda2 ro panic=60\n" 12 70
pascal@17924 647 [ $? -eq 0 ] || return
pascal@17924 648 fi
pascal@18240 649 cp $media/boot/bzImage linux.exe
pascal@19029 650 du -h $PWD/linux.exe
pascal@17635 651 }
pascal@17635 652
pascal@17635 653 memtest()
pascal@17635 654 {
pascal@17924 655 if [ -z "$1" ]; then
pascal@20771 656 $DIALOG --clear --title " Create memtest.exe ? " \
pascal@17924 657 --yes-label "Install" --yesno \
pascal@17635 658 "\nMemtest86 is a thorough, stand alone memory test for x86 architecture
pascal@17635 659 computers. BIOS based memory tests are a quick, cursory check and often
pascal@20771 660 miss many of the failures that are detected by Memtest86.\n" 0 0
pascal@17924 661 [ $? -eq 0 ] || return
pascal@17924 662 fi
pascal@17924 663 gotcdfile 'memtest*' && cp $file memtest.exe
pascal@19029 664 du -h $PWD/memtest.exe
pascal@17635 665 }
pascal@17635 666
pascal@17635 667 mkfat12()
pascal@17635 668 {
pascal@17635 669 [ $(($(get 0 $1) - 0x5A4D)) -eq 0 ] || return
pascal@17635 670 J=$(($(get 3 $1 1) + 0x02))
pascal@17635 671 R=$((1 + $(get 497 $1 1) + 1 + ($(get 500 $1)-1)/32))
pascal@17635 672 [ $R -lt 2500 ] || return
pascal@17635 673 [ $((($(get 500 $1)-1) & 31)) -lt 30 ] &&
pascal@17635 674 ddq if=$file bs=32 count=1 seek=$(($R*16 - 1)) of=/dev/fd0
pascal@17635 675 G="18 0 2 0 0 0 0 0"
pascal@17635 676 [ $J -gt 25 ] || G=""
pascal@17635 677 F=0
pascal@17635 678 for i in 1 2 3; do
pascal@17635 679 F=$((((2880-$R-$F-$F)*3+1023)/1024))
pascal@17635 680 done
pascal@17635 681 bytes2bin 0xEB $J 0x90 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20 \
pascal@17635 682 0 2 2 $(($R%256)) $(($R/256)) 2 64 0 64 11 0xF0 $F 0 \
pascal@17635 683 $G | ddq bs=1 of=/dev/fd0
pascal@17635 684 ddq if=/dev/zero bs=512 count=$((4+$F+$F)) seek=$R of=/dev/fd0
pascal@17635 685 for i in $R $(($R+$F)) ; do
pascal@17635 686 bytes2bin 0xF0 0xFF 0xFF | ddq bs=512 seek=$i of=/dev/fd0
pascal@17635 687 done
pascal@17635 688 echo -n $(basename $1) | ddq bs=1 seek=3 count=8 of=/dev/fd0
pascal@17635 689 }
pascal@17635 690
pascal@17635 691 mkfloppy()
pascal@17635 692 {
pascal@21542 693 dotwait "Create a $(basename $1 .exe) boot floppy"
pascal@17635 694 ddq if=$1 of=/dev/fd0
pascal@17635 695 mkfat12 $1
pascal@17635 696 rm -f /tmp/wait
pascal@17635 697 }
pascal@17635 698
pascal@17635 699 fdmemtest()
pascal@17635 700 {
pascal@17924 701 if [ -z "$1" ]; then
pascal@20771 702 $DIALOG --clear --title " Create a Memtest86 boot floppy " \
pascal@17924 703 --yes-label "Create floppy" --yesno \
pascal@17635 704 "\nMemtest86 is a thorough, stand alone memory test for x86 architecture
pascal@17635 705 computers. BIOS based memory tests are a quick, cursory check and often
pascal@17635 706 miss many of the failures that are detected by Memtest86.\n\n
pascal@20771 707 Please insert a blank disk in floppy drive.\n" 0 0
pascal@17924 708 [ $? -eq 0 ] || return
pascal@17924 709 fi
pascal@17924 710 gotcdfile 'memtest*' && mkfloppy $file
pascal@17635 711 }
pascal@17635 712
pascal@17635 713 pxe()
pascal@17635 714 {
pascal@20762 715 gotcdfile '?pxe*'
pascal@17928 716 if [ -z "$1" ]; then
pascal@21542 717 $DIALOG --clear --title " Create $(basename $file .exe).exe ? " \
pascal@17928 718 --yes-label "Install" --yesno \
pascal@17635 719 "\nBoot your operating system from the internet and enjoy a full system
pascal@17635 720 working entirely in RAM with speed and stability in mind. The Linux Kernel
pascal@17635 721 and the complete SliTaz compressed root filesystem will be loaded into RAM
pascal@20771 722 from the Web using PXE and HTTP protocols.\n" 0 0
pascal@17928 723 [ $? -eq 0 ] || return
pascal@17928 724 fi
pascal@21542 725 cp $file $(basename $file .exe).exe
pascal@21542 726 du -h $PWD/$(basename $file .exe).exe
pascal@17635 727 }
pascal@17635 728
pascal@17635 729 fdpxe()
pascal@17635 730 {
pascal@17924 731 if [ -z "$1" ]; then
pascal@20771 732 $DIALOG --clear --title " Create a SliTaz Web boot floppy " \
pascal@17924 733 --yes-label "Create floppy" --yesno \
pascal@17635 734 "\nBoot your operating system from the internet and enjoy a full system
pascal@17635 735 working entirely in RAM with speed and stability in mind. The Linux Kernel
pascal@17635 736 and the complete SliTaz compressed root filesystem will be loaded into RAM
pascal@17635 737 from the Web using PXE and HTTP protocols.\n\n
pascal@20771 738 Please insert a blank disk in floppy drive.\n" 0 0
pascal@17924 739 [ $? -eq 0 ] || return
pascal@17924 740 fi
pascal@20762 741 gotcdfile '?pxe*' && mkfloppy $file
pascal@17924 742 }
pascal@17924 743
pascal@17924 744 menuitem()
pascal@17924 745 {
pascal@17924 746 [ "$3" ] && shift
pascal@17924 747 echo -en "\"$1\" \"$2\""
pascal@17635 748 }
pascal@17635 749
pascal@17635 750 gotposixovl()
pascal@17635 751 {
pascal@19425 752 mount.posixovl 2>&1 | grep -qi usage && gotcdfile 'rootfs*.gz' &&
pascal@19425 753 menuitem "$@"
pascal@17635 754 }
pascal@17635 755
pascal@17635 756 gotposixovlzip()
pascal@17635 757 {
pascal@17635 758 [ "$(which zip)" ] && gotposixovl "$1" "$2"
pascal@17635 759 }
pascal@17635 760
pascal@17635 761 xfile()
pascal@17635 762 {
pascal@17924 763 [ "$(which $1)" ] && menuitem "$@"
pascal@17635 764 }
pascal@17635 765
pascal@17635 766 cdfile()
pascal@17635 767 {
pascal@17924 768 gotcdfile "$1" && menuitem "$@"
pascal@17635 769 }
pascal@17635 770
pascal@19425 771 gottazusb()
pascal@19425 772 {
pascal@19425 773 gotcdfile 'rootfs*.gz' && xfile tazusb "$@"
pascal@19425 774 }
pascal@19425 775
pascal@17659 776 isbzImage()
pascal@17659 777 {
pascal@17659 778 [ $(get 514 $file 4) -eq 1400005704 ] &&
pascal@17659 779 [ $(($(get 529 $file 1) & 1)) -eq 1 ]
pascal@17659 780 }
pascal@17659 781
pascal@17635 782 cdfilex()
pascal@17635 783 {
pascal@17924 784 gotcdfile "$1" && [ "$(which kexec)" ] && isbzImage && menuitem "$@"
pascal@17635 785 }
pascal@17635 786
pascal@17635 787 cdfilef()
pascal@17635 788 {
pascal@17635 789 [ -e /sys/block/fd0 ] && cdfile "$@"
pascal@17635 790 }
pascal@17635 791
pascal@17635 792 cdexe()
pascal@17635 793 {
pascal@17635 794 gotcdfile "$1" &&
pascal@17635 795 [ $(get 0 $file 2>/dev/null || echo 0) -eq 23117 ] &&
pascal@17924 796 menuitem "$@"
pascal@17635 797 }
pascal@17635 798
pascal@17635 799 misspkg()
pascal@17635 800 {
pascal@19029 801 for i in zip kexec-tools posixovl cdrkit cdrkit-isoinfo ; do
pascal@17635 802 [ -d /var/lib/tazpkg/installed/$i/ ] && continue
pascal@17924 803 [ "$1" != "install" ] && menuitem "$@" && return
pascal@17635 804 tazpkg get-install $i
pascal@17635 805 done
pascal@17635 806 }
pascal@17635 807
pascal@17635 808 missing()
pascal@17635 809 {
pascal@17635 810 misspkg install
pascal@17635 811 }
pascal@17635 812
pascal@17635 813 ishybrid()
pascal@17635 814 {
pascal@18670 815 [ $(get 510 "$ISO") -eq 43605 ] || return
pascal@18670 816 C=$((2048*$(get $(((17*2048) + 71)) "$ISO" 4)))
pascal@18670 817 [ $(get $C "$ISO" 4) -eq 1 ] || return
pascal@18670 818 [ $(get $(($C+30)) "$ISO" 4) -eq $((0x88AA55)) ] || return
pascal@18670 819 C=$((2048*$(get $(($C+40)) "$ISO" 4)))
pascal@18670 820 [ $(get $(($C+64)) "$ISO" 4) -eq 1886961915 ] && menuitem "$@"
pascal@17635 821 }
pascal@17635 822
pascal@17635 823 isiso()
pascal@17635 824 {
pascal@18670 825 [ $(get 32769 "$ISO" 4) -eq 808469571 ] && menuitem "$@"
pascal@18140 826 }
pascal@18140 827
pascal@18140 828 hastazboot()
pascal@18140 829 {
pascal@18670 830 [ $(get 0 "$ISO") -eq 23117 ] && menuitem "$@"
pascal@18034 831 }
pascal@18034 832
pascal@18034 833 burnable()
pascal@18034 834 {
pascal@19510 835 [ "$(sed '/Can wr.*1$/!d' /proc/sys/dev/cdrom/info 2> /dev/null)" ] &&
pascal@19510 836 menuitem "$@"
pascal@18034 837 }
pascal@18034 838
pascal@18034 839 blankable()
pascal@18034 840 {
pascal@19510 841 [ "$(sed '/Can wr.*RW.*1$/!d' /proc/sys/dev/cdrom/info 2> /dev/null)" ] &&
pascal@19510 842 menuitem "$@"
pascal@18034 843 }
pascal@18034 844
pascal@18034 845 burniso()
pascal@18034 846 {
pascal@18034 847 wodim -v speed=$(fgrep "drive speed" /proc/sys/dev/cdrom/info | cut -f3) \
pascal@18034 848 -eject -multi "$ISO"
pascal@18034 849 }
pascal@18034 850
pascal@18034 851 blankcd()
pascal@18034 852 {
pascal@18034 853 wodim -v -blank=fast
pascal@17635 854 }
pascal@17635 855
pascal@18675 856 customsector()
pascal@18675 857 {
pascal@19324 858 local c=$(echo $(get 32848 "$ISO" 4))
pascal@19324 859 hascustomconf $(($c+16)) && echo $(($c+16)) || echo $c
pascal@18675 860 }
pascal@18675 861
pascal@18675 862 hascustomconf()
pascal@18675 863 {
pascal@19324 864 [ "$(ddq bs=2k skip=${1:-$(customsector)} if="$ISO" | ddq bs=1 count=6)" \
pascal@20892 865 = "#!boot" ]
pascal@18675 866 }
pascal@18675 867
pascal@18675 868 gotcustomconf()
pascal@18675 869 {
pascal@18675 870 hascustomconf && menuitem "$@"
pascal@18675 871 }
pascal@18675 872
pascal@19425 873 hasflavor()
pascal@19425 874 {
pascal@19425 875 [ -x /usr/bin/tazlito ] && [ -s $media/boot/bzImage ] && menuitem "$@"
pascal@19425 876 }
pascal@19425 877
pascal@17635 878 gotisomd5()
pascal@17635 879 {
pascal@17635 880 [ "$(which md5sum 2> /dev/null)" ] &&
pascal@18670 881 [ $(get 0 "$ISO") -eq 23117 ] &&
pascal@18670 882 [ $(get 18 "$ISO") -ne 0 ] && menuitem "$@"
pascal@17635 883 }
pascal@17635 884
pascal@18675 885 getcustomconf()
pascal@18675 886 {
pascal@18675 887 ddq bs=2k skip=$(customsector) if="$ISO" | while read line; do
pascal@18675 888 case "$line" in
pascal@18675 889 \#!boot*) ;;
pascal@18675 890 append=*) echo ${line#append=} > cmdline && ls -l $PWD/cmdline ;;
pascal@18675 891 initrd:*) cnt=${line#initrd:}
pascal@18675 892 { ddq bs=512 count=$(($cnt / 512));
pascal@18675 893 ddq bs=1 count=$(($cnt % 512)); } > initrd &&
pascal@18675 894 ls -l $PWD/initrd
pascal@18675 895 break ;;
pascal@20771 896 *) break ;;
pascal@18675 897 esac
pascal@18675 898 done
pascal@18675 899 [ "$1" ] && return 0
pascal@18675 900 echo -e "\rPress RETURN to continue."
pascal@18675 901 read n
pascal@18675 902 }
pascal@18675 903
pascal@17635 904 isomd5()
pascal@17635 905 {
pascal@17635 906 dotwait "Checking iso image"
pascal@18670 907 [ "$(ddq if="$ISO" bs=2k skip=16 \
pascal@20892 908 count=$(($(get 32848 "$ISO" 4)-16)) | md5sum)" = \
pascal@18670 909 "$(ddq if="$ISO" bs=16 count=1 skip=2047 | od -N 16 -t x1 -An | \
pascal@17635 910 sed 's/ //g') -" ] && echo "OK" || echo "ERROR"
pascal@17635 911 echo -en "\rChecking iso hybrid boot..."
pascal@18671 912 n=$(($(get 2 "$ISO")-1+($(get 4 "$ISO")-1)*512))
pascal@17635 913 if [ $n -lt 40000 -a $n -gt 32768 ]; then
pascal@18670 914 s=$(get 0 "$ISO" 2 $n | awk '{ i+= $0 } END { print i }')
pascal@18670 915 [ $(((1+$s+$(get $(($n+1)) "$ISO" 1)) % 65536)) -eq 0 ] &&
pascal@17635 916 echo "OK" || echo "ERROR"
pascal@17635 917 fi
pascal@18675 918 if hascustomconf; then
pascal@18672 919 echo -en "\rChecking iso custom config..."
pascal@18672 920 TMP=/tmp/$(basename $0)$$md5
pascal@18675 921 md5="$(ddq bs=2k skip=$(customsector) if="$ISO" | while read line; do
pascal@18670 922 case "$line" in
pascal@18672 923 \#!boot*) echo ${line#*boot } > $TMP ;;
pascal@18670 924 append=*) echo $line ;;
pascal@18670 925 initrd:*) echo $line
pascal@18675 926 cnt=${line#initrd:}
pascal@18675 927 ddq bs=512 count=$((cnt / 512))
pascal@18675 928 ddq bs=1 count=$((cnt % 512))
pascal@18670 929 break ;;
pascal@20771 930 *) break ;;
pascal@18670 931 esac
pascal@18670 932 done | md5sum | cut -c1-32)"
pascal@20892 933 [ "$md5" = "$(cat $TMP)" ] && echo "OK" || echo "ERROR"
pascal@18672 934 rm -f $TMP
pascal@18670 935 fi
pascal@17635 936 rm -f /tmp/wait
pascal@17928 937 [ "$1" ] && return 0
pascal@17635 938 echo -e "\rPress RETURN to continue."
pascal@17635 939 read n
pascal@17635 940 }
pascal@17635 941
pascal@17635 942 usbdev()
pascal@17635 943 {
pascal@17635 944 dotwait "Wait 5 seconds for USB devices"
pascal@17635 945 sleep 5
pascal@17635 946 rm -f /tmp/wait
pascal@17635 947 DEV="$(grep -l 1 /sys/block/*/removable | \
pascal@17635 948 sed 's|/sys/block/\(.*\)/removable|\1|')"
pascal@17635 949 grep -qs 1 /sys/block/$DEV/ro && return
pascal@17635 950 [ "$DEV" ] || return
pascal@17635 951 cat > /tmp/dialog$$ <<EOT
pascal@20771 952 $DIALOG --clear --title " Select your USB key " \
pascal@17635 953 --menu "\nPlease select the USB key according to its known size.\n\n" \
pascal@18240 954 0 0 0 \
pascal@17635 955 $(for i in $DEV ; do
pascal@17635 956 echo -n "/dev/$i \"$(($(cat /sys/block/$i/size)/2048))MB $(cat /sys/block/$i/device/model 2> /dev/null)\" "
pascal@17635 957 done) \
pascal@17635 958
pascal@17635 959 EOT
pascal@17635 960 exec 3>&1
pascal@17635 961 device=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17635 962 rm -f /tmp/dialog$$
pascal@17635 963 retval=$?
pascal@17635 964 exec 3>&-
pascal@17635 965 rm -f /tmp/dialog$$
pascal@17635 966 [ $retval -eq 0 ]
pascal@17635 967 }
pascal@17635 968
pascal@17635 969 tazusbmsg()
pascal@17635 970 {
pascal@17635 971 [ "$(which tazusb 2> /dev/null)" ] || return
pascal@17635 972 echo "You should choose 'USB key read/write installation' to be
pascal@17635 973 able to save the package updates or your own configuration and data files.\n\n"
pascal@17635 974 }
pascal@17635 975
pascal@17635 976 usbbootkey()
pascal@17635 977 {
pascal@17924 978 if [ -b "$1" ]; then
pascal@17924 979 device=$1
pascal@17928 980 elif [ "$1" ]; then
pascal@17928 981 echo "Invalid USB key device"
pascal@20771 982 return 1
pascal@17924 983 else
pascal@20771 984 $DIALOG --clear --title " Create a USB boot key " \
pascal@17924 985 --yes-label "Continue" --yesno \
pascal@17635 986 "\nThe USB key will be used like a CD-ROM. You will not be able to write
pascal@17635 987 any data on the boot partition.\n\n
pascal@17635 988 An extra FAT32 partition will be created with the remaining free space.\n\n
pascal@20771 989 $(tazusbmsg)Please plug your USB stick in now.\n" 16 70
pascal@17924 990 [ $? -eq 0 ] || return
pascal@17924 991 usbdev || return
pascal@17635 992
pascal@17924 993 # perform dd in progress bar
pascal@18670 994 max=$(($(stat -c %s "$ISO")/2048))
pascal@20771 995 i=0; ddq if="$ISO" bs=1024k | (
pascal@20771 996 while ddq bs=1024k count=1 ; do
pascal@17924 997 i=$(($i + 1))
pascal@17924 998 [ $i -gt $max ] && break
pascal@17924 999 echo $((($i*100)/$max)) | dialog --gauge \
pascal@17924 1000 " The ISO image transfer can be long. Please wait..." \
pascal@17924 1001 6 70 0 > /dev/tty 2>&1
pascal@17924 1002 done ) > $device
pascal@17924 1003 fi
pascal@17635 1004
paul@17671 1005 # partition + fat32 format for the remaining space
pascal@17860 1006 for p in 0 16; do
pascal@17860 1007 get $((450+$p)) $device 2 12 | xargs echo | {
pascal@17860 1008 read dx cx ol oh ll lh
pascal@17860 1009 [ $dx -eq $((0x3F17)) ] || continue
pascal@17635 1010 cx=$(($cx & 0xFF00))
pascal@17635 1011 ofs=$(($ll+($lh<<16)))
pascal@17635 1012 n=$(($(cat /sys/block/${device#/dev/}/size)-$ofs))
pascal@17635 1013 m=$(($cx+($n/8)))
pascal@17635 1014 [ $m -gt $((0x3FF00)) ] && m=$((0x3FF00))
pascal@17635 1015 m=$((($m & 0xFF00)+(($m>>16)<<6)))
pascal@17635 1016 words2bin 0 $((0x101+$cx)) 0x3F0B $((32+$m)) \
pascal@17635 1017 $ll $lh $(($n & 0xFFFF)) $(($n >> 16)) | \
pascal@17860 1018 ddq bs=1 seek=$((462-$p)) of=$device
pascal@17635 1019 if [ "$(which mkdosfs 2> /dev/null)" ]; then
pascal@17635 1020 losetup -o $((512*$ofs)) /dev/loop2 $device
pascal@17635 1021 mkdosfs -n "SLITAZ BOOT" /dev/loop2
pascal@17635 1022 words2bin $(($ofs & 0xFFFF)) $(($ofs >> 16)) | \
pascal@17635 1023 ddq bs=1 seek=28 of=/dev/loop2
pascal@17860 1024 sync
pascal@17635 1025 losetup -d /dev/loop2
pascal@17635 1026 fi
pascal@17860 1027 }
pascal@17860 1028 done
pascal@17635 1029 }
pascal@17635 1030
pascal@17635 1031 usbkey()
pascal@17635 1032 {
pascal@20771 1033 $DIALOG --clear --title " Create a SliTaz USB key " \
pascal@17635 1034 --yes-label "Continue" --yesno \
pascal@17635 1035 "\nUnlike a hard drive install, the filesystem is kept in a compressed
pascal@17635 1036 rootfs.gz. The filesystem is loaded entirely into memory upon boot.
pascal@17635 1037 This should increase responsiveness, protect the filesystem against
pascal@17635 1038 accidental corruption and reduce read/writes to the USB drive.
pascal@17635 1039 Once setup, the tazusb utility can rewrite the root filesystem
pascal@20771 1040 with any changes you have made since booting up,
pascal@17635 1041 giving the effective benefits of a hard drive install.\n\n
pascal@17635 1042 /home is mounted on boot using the UUID of your particular flash drive.
pascal@17635 1043 Unlike a device name, the UUID has the benefit of never changing from machine
pascal@17635 1044 to machine.\n\n
pascal@20771 1045 Please plug your USB stick in now.\n" 19 70
pascal@17635 1046 [ $? -eq 0 ] || return
pascal@17635 1047 usbdev || return
pascal@17635 1048 exec 3>&1
pascal@17635 1049 format=`$DIALOG --clear \
pascal@17635 1050 --title " Select the filesystem " \
pascal@17635 1051 --radiolist "\nPlease select the filesystem type to create.\n\n\
pascal@20771 1052 The filesystem creation will erase all the data in the USB key." 14 70 4 \
pascal@17635 1053 "none" "Do not erase the USB key" on \
pascal@17635 1054 "ext3" "Ext3 journaling filesystem" off \
pascal@17635 1055 "ext2" "Ext2 filesystem" off \
pascal@17635 1056 "fat32" "Windows FAT32 filesystem" off \
pascal@17635 1057 2>&1 1>&3`
pascal@17635 1058 retval=$?
pascal@17635 1059 exec 3>&-
pascal@17635 1060 [ $retval -eq 0 ] || return
pascal@17635 1061 [ "$format" != "none" ] && tazusb format $device "SliTaz" $format
pascal@18670 1062 tazusb gen-iso2usb "$ISO" $device
pascal@17635 1063 }
pascal@17635 1064
pascal@17635 1065 dokexec()
pascal@17635 1066 {
pascal@17659 1067 kexec -l $file || return
pascal@18240 1068 quit "kexec -e"
pascal@17635 1069 }
pascal@17635 1070
pascal@17635 1071 runmemtest()
pascal@17635 1072 {
pascal@17635 1073 gotcdfile 'memtest*' && dokexec
pascal@17635 1074 }
pascal@17635 1075
pascal@17635 1076 runpxe()
pascal@17635 1077 {
pascal@20762 1078 gotcdfile '?pxe*' && dokexec
pascal@17635 1079 }
pascal@17635 1080
pascal@17931 1081 flavdata()
pascal@17931 1082 {
pascal@18670 1083 [ $(get 1024 "$ISO") -eq 35615 ] && n=2 || n=$((1+$(get 417 "$ISO" 1)))
pascal@19425 1084 [ $n -eq 4 ] && n=20
pascal@20724 1085 [ $(get $(($n*512)) "$ISO") -eq 35615 ] || n=13
pascal@19510 1086 ddq if="$ISO" bs=512 skip=$n count=20 | zcat 2>/dev/null
pascal@17931 1087 }
pascal@17931 1088
pascal@17931 1089 hasflavinfo()
pascal@17931 1090 {
pascal@20892 1091 [ "$(flavdata | ddq bs=1 count=7 | strings)" = \
pascal@20724 1092 "0707010" ] && menuitem "$@"
pascal@17931 1093 }
pascal@17931 1094
pascal@17931 1095 showfavinfo()
pascal@17931 1096 {
pascal@17931 1097 mkdir -p /tmp/data
pascal@17931 1098 flavdata | ( cd /tmp/data ; cpio -i )
pascal@17931 1099 file=/tmp/data/info
pascal@17931 1100 cat /tmp/data/*desc > $file
pascal@18627 1101 if [ -s /tmp/data/*receipt ]; then
pascal@18627 1102 echo "=== receipt ==="
pascal@18627 1103 cat /tmp/data/*receipt
pascal@18627 1104 fi >> $file
pascal@17931 1105 for i in /tmp/data/*list* ; do
pascal@17931 1106 echo "=== extra ${i#*list} files"
pascal@17931 1107 cat $i
pascal@17931 1108 done >> $file
pascal@17931 1109 if [ "$1" ]; then
pascal@17931 1110 cat $file
pascal@17931 1111 else
pascal@20771 1112 $DIALOG --clear --title " Flavor info " \
pascal@18240 1113 --textbox $file 0 0
pascal@17931 1114 fi
pascal@17931 1115 rm -rf /tmp/data
pascal@17931 1116 }
pascal@17931 1117
pascal@18626 1118 flavor()
pascal@18626 1119 {
pascal@18626 1120 name="$(flavdata | cpio -t 2> /dev/null | sed 's/.[a-z]*$//;q')"
pascal@18626 1121 echo "Create ${name:=flavor}.flavor..."
pascal@18670 1122 tazlito iso2flavor "$ISO" $name
pascal@18771 1123 ls -l $name.flavor 2> /dev/null && return
pascal@18771 1124 sleep 5
pascal@18771 1125 [ "$1" ] && return
pascal@18771 1126 echo -e "\rPress RETURN to continue."
pascal@18771 1127 read n
pascal@18626 1128 }
pascal@18626 1129
pascal@20892 1130 if [ "$1" = "--build" ]; then #install-begin
pascal@18151 1131 uuencode -m - < ifmem.bin | sed -e '/^ifmemcode$/r/dev/stdin' \
pascal@18151 1132 -e '/^ifmemcode$/d' -i $0
pascal@18140 1133 uuencode -m - < bootloader.bin | sed -e '/^bootloader$/r/dev/stdin' \
pascal@18140 1134 -e '/^bootloader$/d' -e '/install-begin$/,/install-end$/d' -i $0
pascal@18140 1135 exit
pascal@18140 1136 fi #install-end
pascal@18140 1137 parse_isolinux()
pascal@18140 1138 {
pascal@18140 1139 awk 'BEGIN { IGNORECASE=1 }
pascal@18145 1140 function multi(n)
pascal@18145 1141 {
pascal@18145 1142 auto=$n
pascal@18145 1143 for (--n; n < NF; n+=2) {
pascal@18145 1144 s=$n
pascal@18145 1145 if (s ~ /M$/) s = substr(s,0,length(s)-1)
pascal@18145 1146 else s /= 1024
pascal@18145 1147 sizes=int(s) " " sizes
pascal@18145 1148 }
pascal@18145 1149 next
pascal@18145 1150 }
pascal@18140 1151 {
pascal@18140 1152 if ($1 == "LABEL") {
pascal@18140 1153 label=$2
pascal@18140 1154 if (auto == "") auto=label
pascal@18140 1155 }
pascal@18140 1156 if ($1 == "KERNEL" || $1 == "COM32") kernel[label]=$2
pascal@18140 1157 if ($1 == "INITRD") initrd[label]=$2
pascal@18140 1158 if ($1 == "APPEND") {
pascal@18140 1159 i=2
pascal@18145 1160 if (kernel[label] ~ "ifmem.c32") multi(3)
pascal@18140 1161 if (kernel[label] ~ "c32box.c32") {
pascal@18140 1162 if ($2 == "linux") { kernel[label]=$3; i=4 }
pascal@18145 1163 if ($2 == "ifmem") multi(4)
pascal@18140 1164 }
pascal@18140 1165 if (kernel[label] ~ "ifcpu64.c32") { auto=$4; next }
pascal@18140 1166 while (i <= NF) {
pascal@18140 1167 if ($i ~ "^initrd=") initrd[label]=substr($i,8)
pascal@18140 1168 else cmdline[label]=cmdline[label] " " $i
pascal@18140 1169 i++
pascal@18140 1170 }
pascal@18140 1171 }
pascal@18140 1172 }
pascal@18140 1173 END {
pascal@18140 1174 print "KERNEL=\"" kernel[auto] "\""
pascal@18140 1175 print "INITRD=\"" initrd[auto] "\""
pascal@18140 1176 print "CMDLINE=\"" substr(cmdline[auto],2) "\""
pascal@18145 1177 print "SIZES=\"" sizes "\""
pascal@18140 1178 }'
pascal@18140 1179 }
pascal@18140 1180
pascal@18140 1181 locase()
pascal@18140 1182 {
pascal@18140 1183 echo "$1" | tr [A-Z] [a-z]
pascal@18140 1184 }
pascal@18140 1185
pascal@18151 1186 ifmemcode()
pascal@18151 1187 {
pascal@18151 1188 uudecode <<EOT
pascal@18151 1189 ifmemcode
pascal@18151 1190 EOT
pascal@18151 1191 }
pascal@18151 1192
pascal@18140 1193 floppyset()
pascal@18140 1194 {
pascal@19425 1195 gotcdfile 'isolinux.cfg'
pascal@19432 1196 $0 include $file | parse_isolinux > /tmp/var$$
pascal@18140 1197 . /tmp/var$$
pascal@19425 1198 [ -z "$KERNEL" ] && echo "Can't parse isolinux.cfg" && return
pascal@18240 1199 for i in $media/$KERNEL $(dirname $file)/$KERNEL $media/$(locase $KERNEL) \
pascal@18240 1200 $(dirname $file)/$(locase $KERNEL); do
pascal@19433 1201 i="$(ls $i* | sed q)"
pascal@19433 1202 [ -n "$i" ] && KERNEL=$i && break
pascal@18240 1203 done
pascal@20771 1204 rm -f /tmp/var$$
pascal@18240 1205 [ $(get 514 $KERNEL 4) -eq 1400005704 ] || return
pascal@18240 1206 n=$(($(get 497 $KERNEL 1)+1))
pascal@18240 1207 ddq bs=512 count=$n if=$KERNEL of=/tmp/fd$$
pascal@18140 1208 uudecode <<EOT | ddq of=/tmp/fd$$ conv=notrunc
pascal@18140 1209 bootloader
pascal@18140 1210 EOT
pascal@18140 1211 pos=$(($n*512))
pascal@18140 1212 if [ -n "$CMDLINE" ]; then
pascal@18140 1213 echo -n "$CMDLINE" | ddq bs=512 count=1 conv=sync >> /tmp/fd$$
pascal@18140 1214 bytes2bin $n | ddq conv=notrunc \
pascal@18140 1215 bs=1 seek=497 count=1 of=/tmp/fd$$
pascal@18140 1216 words2bin $pos | ddq conv=notrunc \
pascal@18140 1217 bs=1 seek=34 count=2 of=/tmp/fd$$
pascal@18240 1218 [ $(get 518 $KERNEL 4) -ge 514 ] &&
pascal@18155 1219 words2bin 32768 9 | ddq conv=notrunc \
pascal@18140 1220 bs=1 seek=552 count=4 of=/tmp/fd$$
pascal@18140 1221 fi
pascal@18140 1222 syssize=$(echo $(get 500 /tmp/fd$$ 4))
pascal@18240 1223 ddq bs=512 skip=$n if=$KERNEL | cat - /dev/zero | \
pascal@18155 1224 ddq bs=512 count=$((($syssize+31)/32)) conv=sync >> /tmp/fd$$
pascal@18140 1225 base=$(stat -c %s /tmp/fd$$)
pascal@18140 1226 len=
pascal@18140 1227 if [ "$INITRD" ]; then
pascal@18140 1228 l=0
pascal@18140 1229 for i in ${INITRD//,/ }; do
pascal@18240 1230 for j in $media/$i $(dirname $KERNEL)/$i $media/$(locase $i) \
pascal@18240 1231 $(dirname $KERNEL)/$(locase $i); do
pascal@19433 1232 j="$(ls $j* | sed q)"
pascal@19433 1233 [ -n "$j" ] && i=$j && break
pascal@18240 1234 done
pascal@18240 1235 ddq if=$i >> /tmp/fd$$
pascal@18240 1236 l=$(($l+$(stat -c %s $i)))
pascal@18140 1237 r=$((4 - ($l % 4)))
pascal@18140 1238 if [ $r -ne 4 ]; then
pascal@18140 1239 ddq if=/dev/zero bs=1 count=$r >> /tmp/fd$$
pascal@18140 1240 l=$(($l + $r))
pascal@18140 1241 fi
pascal@18143 1242 case "$i:$INITRD" in
pascal@18143 1243 *rootfs.gz:*rootfs.gz,*) continue # loram
pascal@18140 1244 esac
pascal@18140 1245 len="$len $l"; l=0
pascal@18140 1246 done
pascal@18143 1247 rdadrs=${RDADRS:-$(((($syssize*16)+0x1F0000) & -4096))}
pascal@18140 1248 words2bin $(($rdadrs & 0xFFFF)) $(($rdadrs >> 16)) | ddq \
pascal@18140 1249 conv=notrunc bs=1 seek=536 count=4 of=/tmp/fd$$
pascal@18140 1250 fi
pascal@18140 1251 n=$(echo $len | wc -w)
pascal@18140 1252 if [ $((494 - $(get 494 /tmp/fd$$))) -ge $(($n * 4)) ]; then
pascal@18140 1253 i=$(($(get 494 /tmp/fd$$)))
pascal@18140 1254 bytes2bin $(($i + ($n*4) - 256)) | ddq bs=1 conv=notrunc \
pascal@18140 1255 seek=496 count=1 of=/tmp/fd$$
pascal@18140 1256 else
pascal@18140 1257 i=$(($pos + 0x1FC - ($n*4)))
pascal@18140 1258 bytes2bin $(($i % 256)) $((i / 256)) 252 | ddq bs=1 \
pascal@18140 1259 conv=notrunc seek=494 count=3 of=/tmp/fd$$
pascal@18151 1260 s=$(($i - 2*$(echo "$SIZES" | wc -w)))
pascal@18151 1261 p=$(($s - $(ifmemcode | wc -c)))
pascal@18151 1262 ifmemcode | ddq bs=1 conv=notrunc seek=$p of=/tmp/fd$$
pascal@18151 1263 words2bin $SIZES | ddq bs=1 conv=notrunc seek=$s of=/tmp/fd$$
pascal@18151 1264 bytes2bin 154 $(($p%256)) $(($p/256)) 0 144 | \
pascal@18151 1265 ddq bs=1 conv=notrunc seek=60 of=/tmp/fd$$
pascal@18140 1266 fi
pascal@18140 1267 for r in $len ; do
pascal@18140 1268 words2bin $(($r & 0xFFFF)) $(($r >> 16)) | ddq conv=notrunc \
pascal@18140 1269 bs=1 seek=$i count=4 of=/tmp/fd$$
pascal@18140 1270 i=$(($i + 4))
pascal@18140 1271 done
pascal@18140 1272 split -b 1440k /tmp/fd$$ fd$$
pascal@18140 1273 rm -f /tmp/fd$$
pascal@18140 1274 n=1; i=0; r=0
pascal@18140 1275 set -- $len
pascal@18140 1276 ls fd$$* | while read file ; do
pascal@18140 1277 if [ $i -gt $(($1+$base)) ]; then
pascal@18140 1278 shift
pascal@18140 1279 r=$(($r+100)); n=0; i=0; base=0
pascal@18140 1280 fi
pascal@18140 1281 ddq of=$file bs=18k seek=80 count=0
pascal@18140 1282 i=$(($i+1474560))
pascal@18140 1283 printf "mv %s fd%03d.img\n" $file $(($r+$n))
pascal@18140 1284 n=$(($n+1))
pascal@18140 1285 done | sh
pascal@19029 1286 du -ch $PWD/fd???.img
pascal@18140 1287 }
pascal@18140 1288
pascal@17635 1289 quit()
pascal@17635 1290 {
pascal@18240 1291 umount -d $media
pascal@18240 1292 rmdir $media
pascal@18240 1293 ${1:-exit}
pascal@17635 1294 }
pascal@17635 1295
pascal@19008 1296 infoiso()
pascal@19008 1297 {
pascal@19008 1298 isoinfo -d -i "$ISO" > /tmp/isoinfo$$
pascal@19008 1299 if [ -x "$(which iso2exe)" ]; then
pascal@19008 1300 echo "----"
pascal@20159 1301 blkid "$ISO" | while read args; do
pascal@20159 1302 set -- $args
pascal@20159 1303 while [ -n "$2" ]; do
pascal@20159 1304 case "$2" in
pascal@20159 1305 *UUID*|PT*) echo $2;;
pascal@20159 1306 esac
pascal@20159 1307 shift
pascal@20159 1308 done
pascal@20159 1309 done
pascal@20159 1310 if ! fdisk -l "$ISO" | grep -q 'valid partition'; then
pascal@20159 1311 fdisk -l "$ISO" | grep heads
pascal@20159 1312 fdisk -l "$ISO" | sed 's/^ *[^ ]* *//;s/ */ /g;$!d'
pascal@20159 1313 fi
pascal@20159 1314 echo "----"
pascal@19008 1315 iso2exe -l "$ISO"
pascal@19008 1316 fi >> /tmp/isoinfo$$
pascal@19008 1317 if [ "$1" ]; then
pascal@19008 1318 cat /tmp/isoinfo$$
pascal@19008 1319 else
pascal@20771 1320 $DIALOG --clear --title " Info ISO " \
pascal@19008 1321 --textbox /tmp/isoinfo$$ 0 0
pascal@19008 1322 fi
pascal@19008 1323 rm -f /tmp/isoinfo$$
pascal@19008 1324 }
pascal@19008 1325
pascal@18289 1326 isotitle()
pascal@18289 1327 {
pascal@18778 1328 echo "$(blkid "$ISO" | sed 's/.*LABEL="\([^"]*\).*/\1/') $(stat \
pascal@18778 1329 -c %y $media/.|sed 's/ .*//') $(basename "$ISO")"
pascal@18289 1330 }
pascal@18289 1331
pascal@20892 1332 if [ "$1" = "include" ]; then
pascal@19432 1333 [ -s "$2" ] && cd $(dirname "$2") && awk -v exe=$0 \
pascal@19432 1334 '{ if ($1 == "include") system(exe " include " $2); else print }' <"$2"
pascal@19432 1335 exit
pascal@19432 1336 fi
pascal@18034 1337 ISO="${1:-/dev/null}"
pascal@20620 1338 [ ${ISO:0:1} != "/" ] && ISO=$(cd $(dirname $ISO); echo $PWD/$(basename $ISO))
pascal@17635 1339 [ -z "$(isiso 2> /dev/null)" ] && echo "Usage : $0 file.iso" && exit 1
pascal@18666 1340 media=/tmp/media$$
pascal@18240 1341 mkdir -p $media
pascal@18670 1342 mount -o loop,ro "$ISO" $media
pascal@17635 1343
pascal@20892 1344 if [ "$2" = "list" ]; then
pascal@17928 1345 sed '/^\$(.*") \\/!d;s/^\$(\(.*\)").*/\1"/' $0 | while read line; do
pascal@17928 1346 eval $line
pascal@17928 1347 echo
pascal@17928 1348 done | sed '/^$/d;/"usbkey"/d'
pascal@17928 1349 quit
pascal@17928 1350 fi
pascal@17924 1351 if grep -q "^$2()" $0; then
pascal@17924 1352 exe=$2
pascal@17924 1353 shift 2
pascal@18140 1354 if [ -n "$(eval $(grep "\"$exe\"" $0 | sed \
pascal@18140 1355 '/^\$/!d;s/.(\(.*\)[\t ]*".*"[\t ]*".*/\1/'))" ]; then
pascal@18289 1356 isotitle
pascal@17924 1357 grep "\"$exe\"" $0 | sed '/^\$/!d;s/.*"[\t ]*"\(.*\)".*/\1/'
pascal@18140 1358 echo ----
pascal@17924 1359 $exe "$@"
pascal@17924 1360 fi
pascal@17924 1361 quit
pascal@17924 1362 fi
pascal@17924 1363
pascal@17635 1364 while true; do
pascal@17635 1365 cat > /tmp/dialog$$ <<EOT
pascal@21092 1366 $DIALOG --clear --title " $(isotitle) " --menu "" 28 70 30 \
pascal@17635 1367 $(cdfile 'README*' "readme" "Show the README file") \
pascal@18675 1368 $(gotcustomconf "getcustomconf" "Get custom config") \
pascal@17635 1369 $(gotisomd5 "isomd5" "Check the ISO image") \
pascal@17635 1370 $(cdfile 'md5sum*' "md5" "Check the ISO files") \
pascal@17635 1371 $(cdfile 'sha*sum*' "sha" "Check the ISO files") \
pascal@19008 1372 $(xfile isoinfo "infoiso" "ISO image info") \
pascal@17635 1373 $(cdfilex boot/bzImage "bootiso" "Boot the ISO image") \
pascal@18034 1374 $(burnable "burniso" "Burn the ISO image") \
pascal@18034 1375 $(blankable "blankcd" "Blank the CD/DVD") \
pascal@17635 1376 $(gotposixovl "install" "Hard disk installation (UMSDOS way)") \
pascal@17635 1377 $(gotposixovl "installtaz" "Hard disk installation (TAZUSB way)") \
pascal@17635 1378 $(gotposixovlzip "inst2zip" "ZIP installation archive (UMSDOS way)") \
pascal@17635 1379 $(gotposixovlzip "insttaz2zip" "ZIP installation archive (TAZUSB way)") \
pascal@19425 1380 $(gottazusb "usbkey" "USB key read/write installation") \
pascal@17635 1381 $(ishybrid "usbbootkey" "USB boot key (read only)") \
paul@17935 1382 $(hasflavinfo "showfavinfo" "Show flavor extra info") \
pascal@19425 1383 $(hasflavor "flavor" "Get flavor file") \
pascal@18140 1384 $(cdfile isolinux.cfg "floppyset" "Boot floppy set") \
pascal@18140 1385 $(hastazboot "tazboot" "Get tazboot.exe Linux loader") \
pascal@17635 1386 $(cdexe boot/bzImage "bzimage" "Get linux DOS/EXE file") \
pascal@17635 1387 $(cdexe 'memtest*' "memtest" "Get Memtest86 DOS/EXE file") \
pascal@17635 1388 $(cdfilef 'memtest*' "fdmemtest" "Create a Memtest86 boot floppy") \
pascal@17635 1389 $(cdfilex 'memtest*' "runmemtest" "Start Memtest86") \
pascal@20724 1390 $(cdexe '?pxe*' "pxe" "Get SliTaz Web boot DOS/EXE utility") \
pascal@20724 1391 $(cdfilef '?pxe*' "fdpxe" "Create a SliTaz Web boot floppy") \
pascal@20724 1392 $(cdfilex '?pxe*' "runpxe" "Start the SliTaz Web boot utility") \
pascal@17635 1393 $(misspkg "missing" "Install packages to get more options") \
pascal@17924 1394 $(menuitem "quit" "Quit this utility")
pascal@17635 1395 EOT
pascal@17635 1396 exec 3>&1
pascal@17635 1397 value=$(. /tmp/dialog$$ 2>&1 1>&3)
pascal@17635 1398 retval=$?
pascal@17635 1399 exec 3>&-
pascal@17635 1400 rm -f /tmp/dialog$$
pascal@18771 1401 [ $retval -eq 0 ] || quit
pascal@17635 1402 $value
pascal@17635 1403 done